# comp.sources.misc and is available on CPAN under authors/id/RAM so
# you may fetch it yourself from your nearest archive site.)
#
+#
+# Though this script was generated by metaconfig, it is OK to send
+# patches against it. It's up to the Configure pumpkin to backport
+# the patch to the metaunits if it is accepted.
+# See Porting/pumpkin.pod for more information on metaconfig.
+#
# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Mon Dec 16 12:51:57 MET 2002 [metaconfig 3.0 PL70]
+# Generated on Mon Sep 12 15:44:06 CEST 2005 [metaconfig 3.0 PL70]
# (with additional metaconfig patches by perlbug@perl.org)
cat >c1$$ <<EOF
(exit $?0) || exec sh $0 $argv:q
rm -f c1$$ c2$$
+if test -f /dev/cputype -a -f /dev/drivers -a -f /dev/osversion; then
+ cat >&4 <<EOF
+***
+*** I'm sorry but this system looks like Plan 9 and Plan 9 doesn't do
+*** Configure that well. (Plan 9 is close to UNIX but not close enough.)
+*** Please read the README.plan9 for further instructions.
+*** Cannot continue, aborting.
+***
+EOF
+ exit 1
+fi
+
: compute my invocation name
me=$0
case "$0" in
: Proper separator for the PATH environment variable
p_=:
: On OS/2 this directory should exist if this is not floppy only system :-]
-if test -d c:/. ; then
+if test -d c:/. || ( uname -a | grep -i 'os\(/\|\)2' ) 2>&1 >/dev/null ; then
if test -n "$OS2_SHELL"; then
p_=\;
PATH=`cmd /c "echo %PATH%" | tr '\\\\' / `
OS2_SHELL=`cmd /c "echo %OS2_SHELL%" | tr '\\\\' / | tr '[A-Z]' '[a-z]'`
+ is_os2=yes
elif test -n "$DJGPP"; then
case "X${MACHTYPE:-nonesuchmach}" in
*cygwin) ;;
paths="$paths /usr/5bin /etc /usr/gnu/bin /usr/new /usr/new/bin /usr/nbin"
paths="$paths /opt/gnu/bin /opt/new /opt/new/bin /opt/nbin"
paths="$paths /sys5.3/bin /sys5.3/usr/bin /bsd4.3/bin /bsd4.3/usr/ucb"
-paths="$paths /bsd4.3/usr/bin /usr/bsd /bsd43/bin /usr/ccs/bin"
+paths="$paths /bsd4.3/usr/bin /usr/bsd /bsd43/bin /opt/ansic/bin /usr/ccs/bin"
paths="$paths /etc /usr/lib /usr/ucblib /lib /usr/ccs/lib"
paths="$paths /sbin /usr/sbin /usr/libexec"
paths="$paths /system/gnu_library/bin"
test -d UU || mkdir UU
cd UU && rm -f ./*
-
ccname=''
ccversion=''
ccsymbols=''
targetarch=''
to=''
usecrosscompile=''
+mistrustnm=''
perllibs=''
dynamic_ext=''
extensions=''
d__fwalk=''
d_access=''
d_accessx=''
+d_aintl=''
d_alarm=''
asctime_r_proto=''
d_asctime_r=''
-d_attribut=''
+d_attribute_format=''
+d_attribute_malloc=''
+d_attribute_nonnull=''
+d_attribute_noreturn=''
+d_attribute_pure=''
+d_attribute_unused=''
+d_attribute_warn_unused_result=''
d_bcmp=''
d_bcopy=''
d_bzero=''
d_void_closedir=''
d_cmsghdr_s=''
d_const=''
+d_copysignl=''
cryptlib=''
d_crypt=''
crypt_r_proto=''
d_endsent=''
d_endservent_r=''
endservent_r_proto=''
+d_faststdio=''
d_fchdir=''
d_fchmod=''
d_fchown=''
gnulibc_version=''
d_hasmntopt=''
d_htonl=''
+d_ilogbl=''
d_inetaton=''
d_int64_t=''
d_isascii=''
d_killpg=''
d_lchown=''
d_ldbl_dig=''
+d_libm_lib_version=''
d_link=''
d_localtime_r=''
localtime_r_proto=''
d_lseekproto=''
d_lstat=''
d_madvise=''
+d_malloc_good_size=''
+d_malloc_size=''
d_mblen=''
d_mbstowcs=''
d_mbtowc=''
d_msgsnd=''
d_msync=''
d_munmap=''
-d_nanosleep=''
d_nice=''
d_nl_langinfo=''
d_off64_t=''
d_old_pthread_create_joinable=''
old_pthread_create_joinable=''
d_pthread_atfork=''
+d_pthread_attr_setscope=''
d_pthread_yield=''
d_sched_yield=''
sched_yield=''
d_safemcpy=''
d_sanemcmp=''
d_sbrkproto=''
+d_scalbnl=''
d_select=''
d_sem=''
d_semctl=''
d_sigaction=''
d_sigprocmask=''
d_sigsetjmp=''
+usesitecustomize=''
d_sockatmark=''
d_sockatmarkproto=''
d_msg_ctrunc=''
d_strerror_r=''
strerror_r_proto=''
d_strftime=''
+d_strlcat=''
+d_strlcpy=''
d_strtod=''
d_strtol=''
d_strtold=''
mallocobj=''
mallocsrc=''
malloctype=''
+usemallocwrap=''
usemymalloc=''
installman1dir=''
man1dir=''
perladmin=''
perlpath=''
d_nv_preserves_uv=''
+d_nv_zero_is_allbits_zero=''
i16size=''
i16type=''
i32size=''
installsitebin=''
sitebin=''
sitebinexp=''
-installsitehtml1=''
-sitehtml1=''
-sitehtml1exp=''
-installsitehtml3=''
-sitehtml3=''
-sitehtml3exp=''
+installsitehtml1dir=''
+sitehtml1dir=''
+sitehtml1direxp=''
+installsitehtml3dir=''
+sitehtml3dir=''
+sitehtml3direxp=''
installsitelib=''
sitelib=''
sitelib_stem=''
sitelibexp=''
-installsiteman1=''
-siteman1=''
-siteman1exp=''
-installsiteman3=''
-siteman3=''
-siteman3exp=''
+installsiteman1dir=''
+siteman1dir=''
+siteman1direxp=''
+installsiteman3dir=''
+siteman3dir=''
+siteman3direxp=''
siteprefix=''
siteprefixexp=''
installsitescript=''
archname64=''
use64bitall=''
use64bitint=''
+usefaststdio=''
ccflags_uselargefiles=''
ldflags_uselargefiles=''
libswanted_uselargefiles=''
runnm=''
usenm=''
useperlio=''
+userelocatableinc=''
usesocks=''
d_oldpthreads=''
use5005threads=''
installvendorbin=''
vendorbin=''
vendorbinexp=''
-installvendorhtml1=''
-vendorhtml1=''
-vendorhtml1exp=''
-installvendorhtml3=''
-vendorhtml3=''
-vendorhtml3exp=''
+installvendorhtml1dir=''
+vendorhtml1dir=''
+vendorhtml1direxp=''
+installvendorhtml3dir=''
+vendorhtml3dir=''
+vendorhtml3direxp=''
d_vendorlib=''
installvendorlib=''
vendorlib=''
vendorlib_stem=''
vendorlibexp=''
-installvendorman1=''
-vendorman1=''
-vendorman1exp=''
-installvendorman3=''
-vendorman3=''
-vendorman3exp=''
+installvendorman1dir=''
+vendorman1dir=''
+vendorman1direxp=''
+installvendorman3dir=''
+vendorman3dir=''
+vendorman3direxp=''
usevendorprefix=''
vendorprefix=''
vendorprefixexp=''
versiononly=''
defvoidused=''
voidflags=''
-pm_apiversion=''
-xs_apiversion=''
yacc=''
yaccflags=''
CONFIG=''
elif test -n "$DJGPP"; then
: DOS DJGPP
_exe=".exe"
-elif test -d c:/. ; then
+elif test -d c:/. -o -n "$is_os2" ; then
: OS/2 or cygwin
_exe=".exe"
fi
libswanted=''
: some systems want to use only the non-versioned libso:s
ignore_versioned_solibs=''
-siteman1=''
-siteman3=''
+siteman1dir=''
+siteman3dir=''
sitescript=''
archname64=''
ccflags_uselargefiles=''
defvoidused=15
: List of libraries we want.
-: If anyone needs -lnet, put it in a hint file.
-libswanted='sfio socket bind inet nsl nm ndbm gdbm dbm db malloc dl'
-libswanted="$libswanted dld ld sun m c cposix posix"
-libswanted="$libswanted ndir dir crypt sec"
-libswanted="$libswanted ucb bsd BSD PW x util rt posix4"
+: If anyone needs extra -lxxx, put those in a hint file.
+libswanted="sfio socket bind inet nsl nm ndbm gdbm dbm db malloc dl dld ld sun"
+libswanted="$libswanted m crypt sec util c cposix posix ucb bsd BSD"
: We probably want to search /usr/shlib before most other libraries.
: This is only used by the lib/ExtUtils/MakeMaker.pm routine extliblist.
glibpth=`echo " $glibpth " | sed -e 's! /usr/shlib ! !'`
up='[:upper:]'
low='[:lower:]'
;;
-*) # There is a discontinuity in EBCDIC between 'I' and 'J'
- # (0xc9 and 0xd1), therefore that is a nice testing point.
- if test "X$up" = X -o "X$low" = X; then
- case "`echo IJ | $tr '[I-J]' '[i-j]' 2>/dev/null`" in
- ij) up='[A-Z]'
- low='[a-z]'
+*) # There is a discontinuity in EBCDIC between 'R' and 'S'
+ # (0xd9 and 0xe2), therefore that is a nice testing point.
+ if test "X$up" = X -o "X$low" = X; then
+ case "`echo RS | $tr '[R-S]' '[r-s]' 2>/dev/null`" in
+ rs) up='[A-Z]'
+ low='[a-z]'
;;
esac
- fi
+ fi
if test "X$up" = X -o "X$low" = X; then
- case "`echo IJ | $tr I-J i-j 2>/dev/null`" in
- ij) up='A-Z'
+ case "`echo RS | $tr R-S r-s 2>/dev/null`" in
+ rs) up='A-Z'
low='a-z'
;;
esac
- fi
+ fi
if test "X$up" = X -o "X$low" = X; then
- case "`echo IJ | od -x 2>/dev/null`" in
- *C9D1*|*c9d1*)
+ case "`echo RS | od -x 2>/dev/null`" in
+ *D9E2*|*d9e2*)
echo "Hey, this might be EBCDIC." >&4
if test "X$up" = X -o "X$low" = X; then
- case "`echo IJ | $tr '[A-IJ-RS-Z]' '[a-ij-rs-z]' 2>/dev/null`" in
- ij) up='[A-IJ-RS-Z]'
- low='[a-ij-rs-z]'
+ case "`echo RS | $tr '[A-IJ-RS-Z]' '[a-ij-rs-z]' 2>/dev/null`" in
+ rs) up='[A-IJ-RS-Z]'
+ low='[a-ij-rs-z]'
;;
esac
fi
if test "X$up" = X -o "X$low" = X; then
- case "`echo IJ | $tr A-IJ-RS-Z a-ij-rs-z 2>/dev/null`" in
- ij) up='A-IJ-RS-Z'
- low='a-ij-rs-z'
+ case "`echo RS | $tr A-IJ-RS-Z a-ij-rs-z 2>/dev/null`" in
+ rs) up='A-IJ-RS-Z'
+ low='a-ij-rs-z'
;;
esac
fi
esac
fi
esac
-case "`echo IJ | $tr \"$up\" \"$low\" 2>/dev/null`" in
-ij)
+case "`echo RS | $tr \"$up\" \"$low\" 2>/dev/null`" in
+rs)
echo "Using $up and $low to convert case." >&4
;;
*)
aix) osname=aix
tmp=`( (oslevel) 2>/dev/null || echo "not found") 2>&1`
case "$tmp" in
- 'not found') osvers="$4"."$3" ;;
+ # oslevel can fail with:
+ # oslevel: Unable to acquire lock.
+ *not\ found) osvers="$4"."$3" ;;
'<3240'|'<>3240') osvers=3.2.0 ;;
'=3240'|'>3240'|'<3250'|'<>3250') osvers=3.2.4 ;;
'=3250'|'>3250') osvers=3.2.5 ;;
domainos) osname=apollo
osvers="$3"
;;
- dgux) osname=dgux
+ dgux) osname=dgux
osvers="$3"
;;
dynixptx*) osname=dynixptx
;;
freebsd) osname=freebsd
osvers="$3" ;;
- genix) osname=genix ;;
- hp*) osname=hpux
+ genix) osname=genix ;;
+ gnu) osname=gnu
+ osvers="$3" ;;
+ hp*) osname=hpux
osvers=`echo "$3" | $sed 's,.*\.\([0-9]*\.[0-9]*\),\1,'`
;;
- irix*) osname=irix
+ irix*) osname=irix
case "$3" in
4*) osvers=4 ;;
5*) osvers=5 ;;
*) osvers="$3" ;;
esac
;;
- linux) osname=linux
+ linux) osname=linux
case "$3" in
*) osvers="$3" ;;
esac
;;
- MiNT) osname=mint
+ MiNT) osname=mint
;;
netbsd*) osname=netbsd
osvers="$3"
openbsd) osname=openbsd
osvers="$3"
;;
+ os2) osname=os2
+ osvers="$4"
+ ;;
POSIX-BC | posix-bc ) osname=posix-bc
osvers="$3"
;;
mips) osname=mips_osf1 ;;
esac
;;
- unixware) osname=svr5
+ # UnixWare 7.1.2 is known as Open UNIX 8
+ openunix|unixware) osname=svr5
osvers="$4"
;;
uts) osname=uts
osname=news_os
fi
$rm -f UU/kernel.what
- elif test -d c:/.; then
+ elif test -d c:/. -o -n "$is_os2" ; then
set X $myuname
osname=os2
osvers="$5"
: who configured the system
cf_time=`LC_ALL=C; LANGUAGE=C; export LC_ALL; export LANGUAGE; $date 2>&1`
-cf_by=`(logname) 2>/dev/null`
case "$cf_by" in
"")
- cf_by=`(whoami) 2>/dev/null`
+ cf_by=`(logname) 2>/dev/null`
case "$cf_by" in
- "") cf_by=unknown ;;
+ "")
+ cf_by=`(whoami) 2>/dev/null`
+ case "$cf_by" in
+ "") cf_by=unknown ;;
+ esac ;;
esac ;;
esac
eval $setvar
-case "$usethreads" in
-"$define"|true|[yY]*)
: Look for a hint-file generated 'call-back-unit'. If the
: user has specified that a threading perl is to be built,
: we may need to set or change some other defaults.
- if $test -f usethreads.cbu; then
- echo "Your platform has some specific hints for threaded builds, using them..."
- . ./usethreads.cbu
- else
+if $test -f usethreads.cbu; then
+ echo "Your platform has some specific hints regarding threaded builds, using them..."
+ . ./usethreads.cbu
+else
+ case "$usethreads" in
+ "$define"|true|[yY]*)
$cat <<EOM
-(Your platform doesn't have any specific hints for threaded builds.
+(Your platform does not have any specific hints for threaded builds.
Assuming POSIX threads, then.)
EOM
- fi
;;
-esac
+ esac
+fi
cat <<EOM
printf("%s\n", "1");
#endif
#endif
- exit(0);
+ return(0);
}
EOM
if $cc -o try $ccflags $ldflags try.c; then
'') firstmakefile='makefile';;
esac
+case "$ccflags" in
+*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
+esac
+
+case "$uselongdouble" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+cat <<EOM
+
+Perl can be built to take advantage of long doubles which
+(if available) may give more accuracy and range for floating point numbers.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Try to use long doubles if available?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set uselongdouble
+eval $setvar
+
+case "$uselongdouble" in
+true|[yY]*) uselongdouble="$define" ;;
+esac
+
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that long doubles should be used,
+: we may need to set or change some other defaults.
+if $test -f uselongdouble.cbu; then
+ echo "Your platform has some specific hints regarding long doubles, using them..."
+ . ./uselongdouble.cbu
+else
+ case "$uselongdouble" in
+ $define)
+ $cat <<EOM
+(Your platform does not have any specific hints for long doubles.)
+EOM
+ ;;
+ esac
+fi
+
: Looking for optional libraries
echo " "
echo "Checking for optional libraries..." >&4
2*) if test -d /etc/conf/kconfig.d &&
$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
then
+ # Interactive Systems (ISC) POSIX mode.
dflt="$dflt -posix"
fi
;;
if $cc -O2 -fno-strict-aliasing -o gcctest gcctest.c; then
echo "Yes, it does." 2>&1
case "$ccflags" in
- *strict-aliasing*)
+ *strict-aliasing*)
echo "Leaving current flags $ccflags alone." 2>&1
;;
*) dflt="$dflt -fno-strict-aliasing" ;;
fi
;;
esac
+ # For gcc, adding -pipe speeds up compilations for some, but apparently
+ # some assemblers can't read from stdin. (It also slows down compilations
+ # in other cases, but those are apparently rarer these days.) AD 5/2004.
+ case "$gccversion" in
+ ?*) echo " "
+ echo "Checking if your compiler accepts -pipe" 2>&1
+ echo 'int main(void) { return 0; }' > gcctest.c
+ if $cc -pipe -o gcctest gcctest.c; then
+ echo "Yes, it does." 2>&1
+ case "$ccflags" in
+ *-pipe*)
+ echo "Leaving current flags $ccflags alone." 2>&1
+ ;;
+ *) dflt="$dflt -pipe" ;;
+ esac
+ else
+ echo "Nope, it doesn't, but that's ok." 2>&1
+ fi
+
+ echo "Checking if your compiler accepts -Wdeclaration-after-statement" 2>&1
+ echo 'int main(void) { return 0; }' > gcctest.c
+ if $cc -Wdeclaration-after-statement -o gcctest gcctest.c; then
+ echo "Yes, it does." 2>&1
+ case "$ccflags" in
+ *-Wdeclaration-after-statement*)
+ echo "Leaving current flags $ccflags alone." 2>&1
+ ;;
+ *) dflt="$dflt -Wdeclaration-after-statement" ;;
+ esac
+ else
+ echo "Nope, it doesn't, but that's ok." 2>&1
+ fi
+ ;;
+ esac
;;
esac
if $test -d $thisincl; then
if $test x$thisincl != x$usrinc; then
case "$dflt" in
- *" -I$thisincl "*);;
- *) dflt="$dflt -I$thisincl ";;
+ *" -I$thisincl "*);;
+ *) dflt="$dflt -I$thisincl ";;
esac
fi
fi
for thislibdir in $libpth; do
case " $loclibpth " in
*" $thislibdir "*)
- case "$dflt " in
+ case "$dflt " in
*"-L$thislibdir "*) ;;
*) dflt="$dflt -L$thislibdir" ;;
esac
echo "Checking your choice of C compiler and flags for coherency..." >&4
$cat > try.c <<'EOF'
#include <stdio.h>
-int main() { printf("Ok\n"); exit(0); }
+int main() { printf("Ok\n"); return(0); }
EOF
set X $cc -o try $optimize $ccflags $ldflags try.c $libs
shift
shift;
$cc -o ${mc_file} $optimize $ccflags $ldflags $* ${mc_file}.c $libs;'
-: check for lengths of integral types
-echo " "
-case "$intsize" in
-'')
- echo "Checking to see how big your integers are..." >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("intsize=%d;\n", (int)sizeof(int));
- printf("longsize=%d;\n", (int)sizeof(long));
- printf("shortsize=%d;\n", (int)sizeof(short));
- exit(0);
-}
-EOCP
- set try
- if eval $compile_ok && $run ./try > /dev/null; then
- eval `$run ./try`
- echo "Your integers are $intsize bytes long."
- echo "Your long integers are $longsize bytes long."
- echo "Your short integers are $shortsize bytes long."
- else
- $cat >&4 <<EOM
-!
-Help! I can't compile and run the intsize test program: please enlighten me!
-(This is probably a misconfiguration in your system or libraries, and
-you really ought to fix it. Still, I'll try anyway.)
-!
-EOM
- dflt=4
- rp="What is the size of an integer (in bytes)?"
- . ./myread
- intsize="$ans"
- dflt=$intsize
- rp="What is the size of a long integer (in bytes)?"
- . ./myread
- longsize="$ans"
- dflt=2
- rp="What is the size of a short integer (in bytes)?"
- . ./myread
- shortsize="$ans"
- fi
- ;;
-esac
-$rm -f try try.*
-
-: check for long long
-echo " "
-echo "Checking to see if you have long long..." >&4
-echo 'int main() { long long x = 7; return 0; }' > try.c
-set try
-if eval $compile; then
- val="$define"
- echo "You have long long."
-else
- val="$undef"
- echo "You do not have long long."
-fi
-$rm try.*
-set d_longlong
-eval $setvar
-
-: check for length of long long
-case "${d_longlong}${longlongsize}" in
-$define)
- echo " "
- echo "Checking to see how big your long longs are..." >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", (int)sizeof(long long));
- return(0);
-}
-EOCP
- set try
- if eval $compile_ok; then
- longlongsize=`$run ./try`
- echo "Your long longs are $longlongsize bytes long."
- else
- dflt='8'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of a long long (in bytes)?"
- . ./myread
- longlongsize="$ans"
- fi
- if $test "X$longsize" = "X$longlongsize"; then
- echo "(That isn't any different from an ordinary long.)"
- fi
- ;;
-esac
-$rm -f try.* try
-
: determine filename position in cpp output
echo " "
echo "Computing filename position in cpp output for #include directives..." >&4
case "$osname" in
vos) cppfilter="tr '\\\\>' '/' |" ;; # path component separator is >
+os2) cppfilter="sed -e 's|\\\\\\\\|/|g' |" ;; # path component separator is \
*) cppfilter='' ;;
esac
: locate header file
set $yyy; shift; shift; yyy=$@;
done'
-: see if inttypes.h is available
-: we want a real compile instead of Inhdr because some systems
-: have an inttypes.h which includes non-existent headers
+: see if stdlib is available
+set stdlib.h i_stdlib
+eval $inhdr
+
+: check for lengths of integral types
echo " "
-$cat >try.c <<EOCP
-#include <inttypes.h>
-int main() {
- static int32_t foo32 = 0x12345678;
+case "$intsize" in
+'')
+ echo "Checking to see how big your integers are..." >&4
+ $cat >try.c <<EOCP
+#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+int main()
+{
+ printf("intsize=%d;\n", (int)sizeof(int));
+ printf("longsize=%d;\n", (int)sizeof(long));
+ printf("shortsize=%d;\n", (int)sizeof(short));
+ exit(0);
}
EOCP
+ set try
+ if eval $compile_ok && $run ./try > /dev/null; then
+ eval `$run ./try`
+ echo "Your integers are $intsize bytes long."
+ echo "Your long integers are $longsize bytes long."
+ echo "Your short integers are $shortsize bytes long."
+ else
+ $cat >&4 <<EOM
+!
+Help! I can't compile and run the intsize test program: please enlighten me!
+(This is probably a misconfiguration in your system or libraries, and
+you really ought to fix it. Still, I'll try anyway.)
+!
+EOM
+ dflt=4
+ rp="What is the size of an integer (in bytes)?"
+ . ./myread
+ intsize="$ans"
+ dflt=$intsize
+ rp="What is the size of a long integer (in bytes)?"
+ . ./myread
+ longsize="$ans"
+ dflt=2
+ rp="What is the size of a short integer (in bytes)?"
+ . ./myread
+ shortsize="$ans"
+ fi
+ ;;
+esac
+$rm -f try try.*
+
+: check for long long
+echo " "
+echo "Checking to see if you have long long..." >&4
+echo 'int main() { long long x = 7; return 0; }' > try.c
set try
if eval $compile; then
- echo "<inttypes.h> found." >&4
val="$define"
+ echo "You have long long."
else
- echo "<inttypes.h> NOT found." >&4
val="$undef"
+ echo "You do not have long long."
fi
-$rm -f try.c try
-set i_inttypes
+$rm try.*
+set d_longlong
eval $setvar
-: check for int64_t
-echo " "
-echo "Checking to see if you have int64_t..." >&4
+: check for length of long long
+case "${d_longlong}${longlongsize}" in
+$define)
+ echo " "
+ echo "Checking to see how big your long longs are..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof(long long));
+ return(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ longlongsize=`$run ./try`
+ echo "Your long longs are $longlongsize bytes long."
+ else
+ dflt='8'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a long long (in bytes)?"
+ . ./myread
+ longlongsize="$ans"
+ fi
+ if $test "X$longsize" = "X$longlongsize"; then
+ echo "(That isn't any different from an ordinary long.)"
+ fi
+ ;;
+esac
+$rm -f try.* try
+
+: see if inttypes.h is available
+: we want a real compile instead of Inhdr because some systems
+: have an inttypes.h which includes non-existent headers
+echo " "
+$cat >try.c <<EOCP
+#include <inttypes.h>
+int main() {
+ static int32_t foo32 = 0x12345678;
+}
+EOCP
+set try
+if eval $compile; then
+ echo "<inttypes.h> found." >&4
+ val="$define"
+else
+ echo "<inttypes.h> NOT found." >&4
+ val="$undef"
+fi
+$rm -f try.c try
+set i_inttypes
+eval $setvar
+
+: check for int64_t
+echo " "
+echo "Checking to see if you have int64_t..." >&4
$cat >try.c <<EOCP
#include <sys/types.h>
#$i_inttypes I_INTTYPES
;;
esac
-case "$use64bitint" in
-"$define"|true|[yY]*)
: Look for a hint-file generated 'call-back-unit'. If the
: user has specified that a 64-bit perl is to be built,
: we may need to set or change some other defaults.
- if $test -f use64bitint.cbu; then
- echo "Your platform has some specific hints for 64-bit integers, using them..."
- . ./use64bitint.cbu
- fi
+if $test -f use64bitint.cbu; then
+ echo "Your platform has some specific hints regarding 64-bit integers, using them..."
+ . ./use64bitint.cbu
+fi
+case "$use64bitint" in
+"$define"|true|[yY]*)
case "$longsize" in
4) case "$archname64" in
'') archname64=64int ;;
;;
esac
-case "$use64bitall" in
-"$define"|true|[yY]*)
: Look for a hint-file generated 'call-back-unit'. If the
: user has specified that a maximally 64-bit perl is to be built,
: we may need to set or change some other defaults.
- if $test -f use64bitall.cbu; then
- echo "Your platform has some specific hints for 64-bit builds, using them..."
- . ./use64bitall.cbu
- fi
+if $test -f use64bitall.cbu; then
+ echo "Your platform has some specific hints regarding 64-bit builds, using them..."
+ . ./use64bitall.cbu
+fi
+case "$use64bitall" in
+"$define"|true|[yY]*)
case "$longsize" in
4) case "$archname64" in
''|64int) archname64=64all ;;
;;
esac
+case "$d_quad:$use64bitint" in
+$undef:$define)
+ cat >&4 <<EOF
+
+*** You have chosen to use 64-bit integers,
+*** but none can be found.
+*** Please rerun Configure without -Duse64bitint and/or -Dusemorebits.
+*** Cannot continue, aborting.
+
+EOF
+ exit 1
+ ;;
+esac
+
+: check for length of double
echo " "
-echo "Checking for GNU C Library..." >&4
-cat >try.c <<'EOCP'
-/* Find out version of GNU C library. __GLIBC__ and __GLIBC_MINOR__
- alone are insufficient to distinguish different versions, such as
- 2.0.6 and 2.0.7. The function gnu_get_libc_version() appeared in
- libc version 2.1.0. A. Dougherty, June 3, 2002.
-*/
+case "$doublesize" in
+'')
+ echo "Checking to see how big your double precision numbers are..." >&4
+ $cat >try.c <<EOCP
#include <stdio.h>
-int main(void)
-{
-#ifdef __GLIBC__
-# ifdef __GLIBC_MINOR__
-# if __GLIBC__ >= 2 && __GLIBC_MINOR__ >= 1
-# include <gnu/libc-version.h>
- printf("%s\n", gnu_get_libc_version());
-# else
- printf("%d.%d\n", __GLIBC__, __GLIBC_MINOR__);
-# endif
-# else
- printf("%d\n", __GLIBC__);
-# endif
- return 0;
-#else
- return 1;
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
#endif
+int main()
+{
+ printf("%d\n", (int)sizeof(double));
+ exit(0);
}
EOCP
+ set try
+ if eval $compile_ok; then
+ doublesize=`$run ./try`
+ echo "Your double is $doublesize bytes long."
+ else
+ dflt='8'
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a double precision number (in bytes)?"
+ . ./myread
+ doublesize="$ans"
+ fi
+ ;;
+esac
+$rm -f try.c try
+
+: check for long doubles
+echo " "
+echo "Checking to see if you have long double..." >&4
+echo 'int main() { long double x = 7.0; }' > try.c
set try
-if eval $compile_ok && $run ./try > glibc.ver; then
+if eval $compile; then
val="$define"
- gnulibc_version=`$cat glibc.ver`
- echo "You are using the GNU C Library version $gnulibc_version"
+ echo "You have long double."
else
val="$undef"
- gnulibc_version=''
- echo "You are not using the GNU C Library"
+ echo "You do not have long double."
fi
-$rm -f try try.* glibc.ver
-set d_gnulibc
+$rm try.*
+set d_longdbl
eval $setvar
-: see if nm is to be used to determine whether a symbol is defined or not
-case "$usenm" in
-'')
- dflt=''
- case "$d_gnulibc" in
- "$define")
+: check for length of long double
+case "${d_longdbl}${longdblsize}" in
+$define)
+ echo " "
+ echo "Checking to see how big your long doubles are..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", sizeof(long double));
+}
+EOCP
+ set try
+ set try
+ if eval $compile; then
+ longdblsize=`$run ./try`
+ echo "Your long doubles are $longdblsize bytes long."
+ else
+ dflt='8'
echo " "
- echo "nm probably won't work on the GNU C Library." >&4
- dflt=n
- ;;
- esac
- case "$dflt" in
- '')
- if $test "$osname" = aix -a "X$PASE" != "Xdefine" -a ! -f /lib/syscalls.exp; then
- echo " "
- echo "Whoops! This is an AIX system without /lib/syscalls.exp!" >&4
- echo "'nm' won't be sufficient on this sytem." >&4
- dflt=n
- fi
- ;;
- esac
- case "$dflt" in
- '') dflt=`$egrep 'inlibc|csym' $rsrc/Configure | wc -l 2>/dev/null`
- if $test $dflt -gt 20; then
- dflt=y
- else
- dflt=n
- fi
- ;;
- esac
+ echo "(I can't seem to compile the test program. Guessing...)" >&4
+ rp="What is the size of a long double (in bytes)?"
+ . ./myread
+ longdblsize="$ans"
+ fi
+ if $test "X$doublesize" = "X$longdblsize"; then
+ echo "That isn't any different from an ordinary double."
+ echo "I'll keep your setting anyway, but you may see some"
+ echo "harmless compilation warnings."
+ fi
;;
+esac
+$rm -f try.* try
+
+: determine the architecture name
+echo " "
+if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
+ tarch=`arch`"-$osname"
+elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
+ if uname -m > tmparch 2>&1 ; then
+ tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
+ -e 's/$/'"-$osname/" tmparch`
+ else
+ tarch="$osname"
+ fi
+ $rm -f tmparch
+else
+ tarch="$osname"
+fi
+case "$myarchname" in
+''|"$tarch") ;;
*)
- case "$usenm" in
- true|$define) dflt=y;;
- *) dflt=n;;
- esac
+ echo "(Your architecture name used to be $myarchname.)"
+ archname=''
;;
esac
-$cat <<EOM
-
-I can use $nm to extract the symbols from your C libraries. This
-is a time consuming task which may generate huge output on the disk (up
-to 3 megabytes) but that should make the symbols extraction faster. The
-alternative is to skip the 'nm' extraction part and to compile a small
-test program instead to determine whether each symbol is present. If
-you have a fast C compiler and/or if your 'nm' output cannot be parsed,
-this may be the best solution.
-
-You probably shouldn't let me use 'nm' if you are using the GNU C Library.
-
-EOM
-rp="Shall I use $nm to extract C symbols from the libraries?"
-. ./myread
-case "$ans" in
-[Nn]*) usenm=false;;
-*) usenm=true;;
+case "$targetarch" in
+'') ;;
+*) archname=`echo $targetarch|sed 's,^[^-]*-,,'` ;;
esac
-
-runnm=$usenm
-case "$reuseval" in
-true) runnm=false;;
+myarchname="$tarch"
+case "$archname" in
+'') dflt="$tarch";;
+*) dflt="$archname";;
esac
-
-: nm options which may be necessary
-case "$nm_opt" in
-'') if $test -f /mach_boot; then
- nm_opt='' # Mach
- elif $test -d /usr/ccs/lib; then
- nm_opt='-p' # Solaris (and SunOS?)
- elif $test -f /dgux; then
- nm_opt='-p' # DG-UX
- elif $test -f /lib64/rld; then
- nm_opt='-p' # 64-bit Irix
- else
- nm_opt=''
- fi;;
+rp='What is your architecture name'
+. ./myread
+archname="$ans"
+case "$usethreads" in
+$define)
+ echo "Threads selected." >&4
+ case "$archname" in
+ *-thread*) echo "...and architecture name already has -thread." >&4
+ ;;
+ *) archname="$archname-thread"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
esac
-
-: nm options which may be necessary for shared libraries but illegal
-: for archive libraries. Thank you, Linux.
-case "$nm_so_opt" in
-'') case "$myuname" in
- *linux*)
- if $nm --help | $grep 'dynamic' > /dev/null 2>&1; then
- nm_so_opt='--dynamic'
- fi
- ;;
- esac
+case "$usemultiplicity" in
+$define)
+ echo "Multiplicity selected." >&4
+ case "$archname" in
+ *-multi*) echo "...and architecture name already has -multi." >&4
+ ;;
+ *) archname="$archname-multi"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
;;
esac
-
-case "$runnm" in
-true)
-: get list of predefined functions in a handy place
-echo " "
-case "$libc" in
-'') libc=unknown
- case "$libs" in
- *-lc_s*) libc=`./loc libc_s$_a $libc $libpth`
+case "$use64bitint$use64bitall" in
+*"$define"*)
+ case "$archname64" in
+ '')
+ echo "This architecture is naturally 64-bit, not changing architecture name." >&4
+ ;;
+ *)
+ case "$use64bitint" in
+ "$define") echo "64 bit integers selected." >&4 ;;
+ esac
+ case "$use64bitall" in
+ "$define") echo "Maximal 64 bitness selected." >&4 ;;
+ esac
+ case "$archname" in
+ *-$archname64*) echo "...and architecture name already has $archname64." >&4
+ ;;
+ *) archname="$archname-$archname64"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
esac
- ;;
esac
-case "$libs" in
-'') ;;
-*) for thislib in $libs; do
- case "$thislib" in
- -lc|-lc_s)
- : Handle C library specially below.
+case "$uselongdouble" in
+$define)
+ echo "Long doubles selected." >&4
+ case "$longdblsize" in
+ $doublesize)
+ echo "...but long doubles are equal to doubles, not changing architecture name." >&4
;;
- -l*)
- thislib=`echo $thislib | $sed -e 's/^-l//'`
- if try=`./loc lib$thislib.$so.'*' X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib$_a X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc $thislib$_a X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$try"; then
- :
- else
- try=''
- fi
- libnames="$libnames $try"
+ *)
+ case "$archname" in
+ *-ld*) echo "...and architecture name already has -ld." >&4
+ ;;
+ *) archname="$archname-ld"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
;;
- *) libnames="$libnames $thislib" ;;
esac
- done
;;
esac
-xxx=normal
-case "$libc" in
-unknown)
- set /lib/libc.$so
- for xxx in $libpth; do
- $test -r $1 || set $xxx/libc.$so
- : The messy sed command sorts on library version numbers.
- $test -r $1 || \
- set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
- tr ' ' $trnl | egrep -v '\.[A-Za-z]*$' | $sed -e '
- h
- s/[0-9][0-9]*/0000&/g
- s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
- G
- s/\n/ /' | \
- $sort | $sed -e 's/^.* //'`
- eval set \$$#
- done
- $test -r $1 || set /usr/ccs/lib/libc.$so
- $test -r $1 || set /lib/libsys_s$_a
+case "$useperlio" in
+$define)
+ echo "Perlio selected." >&4
;;
*)
- set blurfl
+ echo "Perlio not selected, using stdio." >&4
+ case "$archname" in
+ *-stdio*) echo "...and architecture name already has -stdio." >&4
+ ;;
+ *) archname="$archname-stdio"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
;;
esac
-if $test -r "$1"; then
- echo "Your (shared) C library seems to be in $1."
- libc="$1"
-elif $test -r /lib/libc && $test -r /lib/clib; then
- echo "Your C library seems to be in both /lib/clib and /lib/libc."
- xxx=apollo
- libc='/lib/clib /lib/libc'
- if $test -r /lib/syslib; then
- echo "(Your math library is in /lib/syslib.)"
- libc="$libc /lib/syslib"
- fi
-elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
- echo "Your C library seems to be in $libc, as you said before."
-elif $test -r $incpath/usr/lib/libc$_a; then
- libc=$incpath/usr/lib/libc$_a;
- echo "Your C library seems to be in $libc. That's fine."
-elif $test -r /lib/libc$_a; then
- libc=/lib/libc$_a;
- echo "Your C library seems to be in $libc. You're normal."
-else
- if tans=`./loc libc$_a blurfl/dyick $libpth`; $test -r "$tans"; then
- :
- elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
- libnames="$libnames "`./loc clib blurfl/dyick $libpth`
- elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
- :
- elif tans=`./loc Slibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
- :
- elif tans=`./loc Mlibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
- :
- else
- tans=`./loc Llibc$_a blurfl/dyick $xlibpth`
- fi
- if $test -r "$tans"; then
- echo "Your C library seems to be in $tans, of all places."
- libc=$tans
- else
- libc='blurfl'
- fi
+if $test -f archname.cbu; then
+ echo "Your platform has some specific hints for architecture name, using them..."
+ . ./archname.cbu
fi
-if $test $xxx = apollo -o -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
- dflt="$libc"
- cat <<EOM
-
-If the guess above is wrong (which it might be if you're using a strange
-compiler, or your machine supports multiple models), you can override it here.
-
-EOM
-else
- dflt=''
- echo $libpth | $tr ' ' $trnl | $sort | $uniq > libpath
- cat >&4 <<EOM
-I can't seem to find your C library. I've looked in the following places:
-EOM
- $sed 's/^/ /' libpath
- cat <<EOM
+: determine root of directory hierarchy where package will be installed.
+case "$prefix" in
+'')
+ dflt=`./loc . /usr/local /usr/local /local /opt /usr`
+ ;;
+*?/)
+ dflt=`echo "$prefix" | sed 's/.$//'`
+ ;;
+*)
+ dflt="$prefix"
+ ;;
+esac
+$cat <<EOM
-None of these seems to contain your C library. I need to get its name...
+By default, $package will be installed in $dflt/bin, manual pages
+under $dflt/man, etc..., i.e. with $dflt as prefix for all
+installation directories. Typically this is something like /usr/local.
+If you wish to have binaries under /usr/bin but other parts of the
+installation under /usr/local, that's ok: you will be prompted
+separately for each of the installation directories, the prefix being
+only used to set the defaults.
EOM
-fi
-fn=f
-rp='Where is your C library?'
+fn=d~
+rp='Installation prefix to use?'
. ./getfile
-libc="$ans"
+oldprefix=''
+case "$prefix" in
+'') ;;
+*)
+ case "$ans" in
+ "$prefix") ;;
+ *) oldprefix="$prefix";;
+ esac
+ ;;
+esac
+prefix="$ans"
+prefixexp="$ansexp"
+
+case "$afsroot" in
+'') afsroot=/afs ;;
+*) afsroot=$afsroot ;;
+esac
-echo " "
-echo $libc $libnames | $tr ' ' $trnl | $sort | $uniq > libnames
-set X `cat libnames`
-shift
-xxx=files
-case $# in 1) xxx=file; esac
-echo "Extracting names from the following $xxx for later perusal:" >&4
-echo " "
-$sed 's/^/ /' libnames >&4
-echo " "
-$echo $n "This may take a while...$c" >&4
-
-for file in $*; do
- case $file in
- *$so*) $nm $nm_so_opt $nm_opt $file 2>/dev/null;;
- *) $nm $nm_opt $file 2>/dev/null;;
- esac
-done >libc.tmp
-
-$echo $n ".$c"
-$grep fprintf libc.tmp > libc.ptf
-xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
-xrun='eval "<libc.tmp $com >libc.list"; echo "done." >&4'
-xxx='[ADTSIW]'
-if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *_[_.]*//p' -e 's/^.* $xxx *//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^__*//' -e 's/^\([a-zA-Z_0-9$]*\).*xtern.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e '/|UNDEF/d' -e '/FUNC..GL/s/^.*|__*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.* D __*//p' -e 's/^.* D //p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^_//' -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$grep '|' | $sed -n -e '/|COMMON/d' -e '/|DATA/d' \
- -e '/ file/d' -e 's/^\([^ ]*\).*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p' -e 's/^.*|FUNC |WEAK .*|//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^__//' -e '/|Undef/d' -e '/|Proc/s/ .*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|Proc .*|Text *| *//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^[-0-9a-f ]*_\(.*\)=.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/.*\.text n\ \ \ \.//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="sed -n -e 's/^__.*//' -e 's/[ ]*D[ ]*[0-9]*.*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-else
- $nm -p $* 2>/dev/null >libc.tmp
- $grep fprintf libc.tmp > libc.ptf
- if com="$sed -n -e 's/^.* [ADTSIW] *_[_.]*//p' -e 's/^.* [ADTSIW] //p'";\
- eval $xscan; $contains '^fprintf$' libc.list >/dev/null 2>&1
- then
- nm_opt='-p'
- eval $xrun
- else
- echo " "
- echo "$nm didn't seem to work right. Trying $ar instead..." >&4
- com=''
- if $ar t $libc > libc.tmp && $contains '^fprintf$' libc.tmp >/dev/null 2>&1; then
- for thisname in $libnames $libc; do
- $ar t $thisname >>libc.tmp
- done
- $sed -e "s/\\$_o\$//" < libc.tmp > libc.list
- echo "Ok." >&4
- elif test "X$osname" = "Xos2" && $ar tv $libc > libc.tmp; then
- # Repeat libc to extract forwarders to DLL entries too
- for thisname in $libnames $libc; do
- $ar tv $thisname >>libc.tmp
- # Revision 50 of EMX has bug in $ar.
- # it will not extract forwarders to DLL entries
- # Use emximp which will extract exactly them.
- emximp -o tmp.imp $thisname \
- 2>/dev/null && \
- $sed -e 's/^\([_a-zA-Z0-9]*\) .*$/\1/p' \
- < tmp.imp >>libc.tmp
- $rm tmp.imp
- done
- $sed -e "s/\\$_o\$//" -e 's/^ \+//' < libc.tmp > libc.list
- echo "Ok." >&4
- else
- echo "$ar didn't seem to work right." >&4
- echo "Maybe this is a Cray...trying bld instead..." >&4
- if bld t $libc | $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" > libc.list
- then
- for thisname in $libnames; do
- bld t $libnames | \
- $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" >>libc.list
- $ar t $thisname >>libc.tmp
- done
- echo "Ok." >&4
- else
- echo "That didn't work either. Giving up." >&4
- exit 1
- fi
- fi
- fi
-fi
-nm_extract="$com"
-case "$PASE" in
-define)
- echo " "
- echo "Since you are compiling for PASE, extracting more symbols from libc.a ...">&4
- dump -Tv /lib/libc.a | awk '$7 == "/unix" {print $5 " " $8}' | grep "^SV" | awk '{print $2}' >> libc.list
- ;;
-*) if $test -f /lib/syscalls.exp; then
- echo " "
- echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
- $sed -n 's/^\([^ ]*\)[ ]*syscall[0-9]*[ ]*$/\1/p' /lib/syscalls.exp >>libc.list
- fi
- ;;
-esac
-;;
-esac
-$rm -f libnames libpath
-
-: is a C symbol defined?
-csym='tlook=$1;
-case "$3" in
--v) tf=libc.tmp; tc=""; tdc="";;
--a) tf=libc.tmp; tc="[0]"; tdc="[]";;
-*) tlook="^$1\$"; tf=libc.list; tc="()"; tdc="()";;
-esac;
-tx=yes;
-case "$reuseval-$4" in
-true-) ;;
-true-*) tx=no; eval "tval=\$$4"; case "$tval" in "") tx=yes;; esac;;
-esac;
-case "$tx" in
-yes)
- case "$runnm" in
- true)
- if $contains $tlook $tf >/dev/null 2>&1;
- then tval=true;
- else tval=false;
- fi;;
- *)
- echo "int main() { extern short $1$tdc; printf(\"%hd\", $1$tc); }" > t.c;
- if $cc -o t $optimize $ccflags $ldflags t.c $libs >/dev/null 2>&1;
- then tval=true;
- else tval=false;
- fi;
- $rm -f t t.c;;
- esac;;
-*)
- case "$tval" in
- $define) tval=true;;
- *) tval=false;;
- esac;;
-esac;
-eval "$2=$tval"'
-
-: define an is-in-libc? function
-inlibc='echo " "; td=$define; tu=$undef;
-sym=$1; var=$2; eval "was=\$$2";
-tx=yes;
-case "$reuseval$was" in
-true) ;;
-true*) tx=no;;
-esac;
-case "$tx" in
-yes)
- set $sym tres -f;
- eval $csym;
- case "$tres" in
- true)
- echo "$sym() found." >&4;
- case "$was" in $undef) . ./whoa; esac; eval "$var=\$td";;
- *)
- echo "$sym() NOT found." >&4;
- case "$was" in $define) . ./whoa; esac; eval "$var=\$tu";;
- esac;;
-*)
- case "$was" in
- $define) echo "$sym() found." >&4;;
- *) echo "$sym() NOT found." >&4;;
- esac;;
-esac'
-
-: see if sqrtl exists
-set sqrtl d_sqrtl
-eval $inlibc
-
-hasproto='varname=$1; func=$2; shift; shift;
-while $test $# -ge 2; do
- case "$1" in
- $define) echo "#include <$2>";;
- esac ;
- shift 2;
-done > try.c;
-$cppstdin $cppflags $cppminus < try.c > tryout.c 2>/dev/null;
-if $contains "$func.*(" tryout.c >/dev/null 2>&1; then
- echo "$func() prototype found.";
- val="$define";
-else
- echo "$func() prototype NOT found.";
- val="$undef";
-fi;
-set $varname;
-eval $setvar;
-$rm -f try.c tryout.c'
-
-: check for length of double
-echo " "
-case "$doublesize" in
-'')
- echo "Checking to see how big your double precision numbers are..." >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", (int)sizeof(double));
- exit(0);
-}
-EOCP
- set try
- if eval $compile_ok; then
- doublesize=`$run ./try`
- echo "Your double is $doublesize bytes long."
- else
- dflt='8'
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of a double precision number (in bytes)?"
- . ./myread
- doublesize="$ans"
- fi
- ;;
-esac
-$rm -f try.c try
-
-: check for long doubles
-echo " "
-echo "Checking to see if you have long double..." >&4
-echo 'int main() { long double x = 7.0; }' > try.c
-set try
-if eval $compile; then
- val="$define"
- echo "You have long double."
-else
- val="$undef"
- echo "You do not have long double."
-fi
-$rm try.*
-set d_longdbl
-eval $setvar
-
-: check for length of long double
-case "${d_longdbl}${longdblsize}" in
-$define)
- echo " "
- echo "Checking to see how big your long doubles are..." >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof(long double));
-}
-EOCP
- set try
- set try
- if eval $compile; then
- longdblsize=`$run ./try`
- echo "Your long doubles are $longdblsize bytes long."
- else
- dflt='8'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)" >&4
- rp="What is the size of a long double (in bytes)?"
- . ./myread
- longdblsize="$ans"
- fi
- if $test "X$doublesize" = "X$longdblsize"; then
- echo "(That isn't any different from an ordinary double.)"
- fi
- ;;
-esac
-$rm -f try.* try
-
-echo " "
-
-if $test X"$d_longdbl" = X"$define"; then
-
-echo "Checking how to print long doubles..." >&4
-
-if $test X"$sPRIfldbl" = X -a X"$doublesize" = X"$longdblsize"; then
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- double d = 123.456;
- printf("%.3f\n", d);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`$run ./try`
- case "$yyy" in
- 123.456)
- sPRIfldbl='"f"'; sPRIgldbl='"g"'; sPRIeldbl='"e"';
- sPRIFUldbl='"F"'; sPRIGUldbl='"G"'; sPRIEUldbl='"E"';
- echo "We will use %f."
- ;;
- esac
- fi
-fi
-
-if $test X"$sPRIfldbl" = X; then
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- long double d = 123.456;
- printf("%.3Lf\n", d);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`$run ./try`
- case "$yyy" in
- 123.456)
- sPRIfldbl='"Lf"'; sPRIgldbl='"Lg"'; sPRIeldbl='"Le"';
- sPRIFUldbl='"LF"'; sPRIGUldbl='"LG"'; sPRIEUldbl='"LE"';
- echo "We will use %Lf."
- ;;
- esac
- fi
-fi
-
-if $test X"$sPRIfldbl" = X; then
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- long double d = 123.456;
- printf("%.3llf\n", d);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`$run ./try`
- case "$yyy" in
- 123.456)
- sPRIfldbl='"llf"'; sPRIgldbl='"llg"'; sPRIeldbl='"lle"';
- sPRIFUldbl='"llF"'; sPRIGUldbl='"llG"'; sPRIEUldbl='"llE"';
- echo "We will use %llf."
- ;;
- esac
- fi
-fi
-
-if $test X"$sPRIfldbl" = X; then
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- long double d = 123.456;
- printf("%.3lf\n", d);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`$run ./try`
- case "$yyy" in
- 123.456)
- sPRIfldbl='"lf"'; sPRIgldbl='"lg"'; sPRIeldbl='"le"';
- sPRIFUldbl='"lF"'; sPRIGUldbl='"lG"'; sPRIEUldbl='"lE"';
- echo "We will use %lf."
- ;;
- esac
- fi
-fi
-
-if $test X"$sPRIfldbl" = X; then
- echo "Cannot figure out how to print long doubles." >&4
-else
- sSCNfldbl=$sPRIfldbl # expect consistency
-fi
-
-$rm -f try try.*
-
-fi # d_longdbl
-
-case "$sPRIfldbl" in
-'') d_PRIfldbl="$undef"; d_PRIgldbl="$undef"; d_PRIeldbl="$undef";
- d_PRIFUldbl="$undef"; d_PRIGUldbl="$undef"; d_PRIEUldbl="$undef";
- d_SCNfldbl="$undef";
- ;;
-*) d_PRIfldbl="$define"; d_PRIgldbl="$define"; d_PRIeldbl="$define";
- d_PRIFUldbl="$define"; d_PRIGUldbl="$define"; d_PRIEUldbl="$define";
- d_SCNfldbl="$define";
- ;;
-esac
-
-: see if modfl exists
-set modfl d_modfl
-eval $inlibc
-
-: see if prototype for modfl is available
-echo " "
-set d_modflproto modfl math.h
-eval $hasproto
-
-d_modfl_pow32_bug="$undef"
-
-case "$d_longdbl$d_modfl" in
-$define$define)
- $cat <<EOM
-Checking to see whether your modfl() is okay for large values...
-EOM
-$cat >try.c <<EOCP
-#include <math.h>
-#include <stdio.h>
-EOCP
-if $test "X$d_modflproto" != "X$define"; then
- $cat >>try.c <<EOCP
-/* Sigh. many current glibcs provide the function, but do not prototype it. */
-long double modfl (long double, long double *);
-EOCP
-fi
-$cat >>try.c <<EOCP
-int main() {
- long double nv = 4294967303.15;
- long double v, w;
- v = modfl(nv, &w);
-#ifdef __GLIBC__
- printf("glibc");
-#endif
- printf(" %"$sPRIfldbl" %"$sPRIfldbl" %"$sPRIfldbl"\n", nv, v, w);
- return 0;
-}
-EOCP
- case "$osname:$gccversion" in
- aix:) saveccflags="$ccflags"
- ccflags="$ccflags -qlongdouble" ;; # to avoid core dump
- esac
- set try
- if eval $compile; then
- foo=`$run ./try`
- case "$foo" in
- *" 4294967303.150000 1.150000 4294967302.000000")
- echo >&4 "Your modfl() is broken for large values."
- d_modfl_pow32_bug="$define"
- case "$foo" in
- glibc) echo >&4 "You should upgrade your glibc to at least 2.2.2 to get a fixed modfl()."
- ;;
- esac
- ;;
- *" 4294967303.150000 0.150000 4294967303.000000")
- echo >&4 "Your modfl() seems okay for large values."
- ;;
- *) echo >&4 "I don't understand your modfl() at all."
- d_modfl="$undef"
- ;;
- esac
- $rm -f try.* try core core.try.*
- else
- echo "I cannot figure out whether your modfl() is okay, assuming it isn't."
- d_modfl="$undef"
- fi
- case "$osname:$gccversion" in
- aix:) ccflags="$saveccflags" ;; # restore
- esac
- ;;
-esac
-
-case "$ccflags" in
-*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
-esac
-
-case "$uselongdouble" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-cat <<EOM
-
-Perl can be built to take advantage of long doubles which
-(if available) may give more accuracy and range for floating point numbers.
-
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Try to use long doubles if available?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
-esac
-set uselongdouble
-eval $setvar
-
-case "$uselongdouble" in
-true|[yY]*) uselongdouble="$define" ;;
-esac
-
-case "$uselongdouble" in
-$define)
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that long doubles should be used,
-: we may need to set or change some other defaults.
- if $test -f uselongdouble.cbu; then
- echo "Your platform has some specific hints for long doubles, using them..."
- . ./uselongdouble.cbu
- else
- $cat <<EOM
-(Your platform doesn't have any specific hints for long doubles.)
-EOM
- fi
- ;;
-esac
-
-message=X
-case "$uselongdouble:$d_sqrtl:$d_modfl" in
-$define:$define:$define)
- : You have both
- ;;
-$define:$define:$undef)
- message="I could not find modfl"
- ;;
-$define:$undef:$define)
- message="I could not find sqrtl"
- ;;
-$define:$undef:$undef)
- message="I found neither sqrtl nor modfl"
- ;;
-esac
-
-if $test "$message" != X; then
- $cat <<EOM >&4
-
-*** You requested the use of long doubles but you do not seem to have
-*** the mathematic functions for long doubles.
-*** ($message)
-*** I'm disabling the use of long doubles.
-
-EOM
-
- uselongdouble=$undef
-fi
-
-: determine the architecture name
-echo " "
-if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
- tarch=`arch`"-$osname"
-elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
- if uname -m > tmparch 2>&1 ; then
- tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
- -e 's/$/'"-$osname/" tmparch`
- else
- tarch="$osname"
- fi
- $rm -f tmparch
-else
- tarch="$osname"
-fi
-case "$myarchname" in
-''|"$tarch") ;;
-*)
- echo "(Your architecture name used to be $myarchname.)"
- archname=''
- ;;
-esac
-case "$targetarch" in
-'') ;;
-*) archname=`echo $targetarch|sed 's,^[^-]*-,,'` ;;
-esac
-myarchname="$tarch"
-case "$archname" in
-'') dflt="$tarch";;
-*) dflt="$archname";;
-esac
-rp='What is your architecture name'
-. ./myread
-archname="$ans"
-case "$usethreads" in
-$define)
- echo "Threads selected." >&4
- case "$archname" in
- *-thread*) echo "...and architecture name already has -thread." >&4
- ;;
- *) archname="$archname-thread"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-esac
-case "$usemultiplicity" in
-$define)
- echo "Multiplicity selected." >&4
- case "$archname" in
- *-multi*) echo "...and architecture name already has -multi." >&4
- ;;
- *) archname="$archname-multi"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-esac
-case "$use64bitint$use64bitall" in
-*"$define"*)
- case "$archname64" in
- '')
- echo "This architecture is naturally 64-bit, not changing architecture name." >&4
- ;;
- *)
- case "$use64bitint" in
- "$define") echo "64 bit integers selected." >&4 ;;
- esac
- case "$use64bitall" in
- "$define") echo "Maximal 64 bitness selected." >&4 ;;
- esac
- case "$archname" in
- *-$archname64*) echo "...and architecture name already has $archname64." >&4
- ;;
- *) archname="$archname-$archname64"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
- esac
-esac
-case "$uselongdouble" in
-$define)
- echo "Long doubles selected." >&4
- case "$longdblsize" in
- $doublesize)
- echo "...but long doubles are equal to doubles, not changing architecture name." >&4
- ;;
- *)
- case "$archname" in
- *-ld*) echo "...and architecture name already has -ld." >&4
- ;;
- *) archname="$archname-ld"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
- esac
- ;;
-esac
-case "$useperlio" in
-$define)
- echo "Perlio selected." >&4
- ;;
-*)
- echo "Perlio not selected, using stdio." >&4
- case "$archname" in
- *-stdio*) echo "...and architecture name already has -stdio." >&4
- ;;
- *) archname="$archname-stdio"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-esac
-
-: determine root of directory hierarchy where package will be installed.
-case "$prefix" in
-'')
- dflt=`./loc . /usr/local /usr/local /local /opt /usr`
- ;;
-*?/)
- dflt=`echo "$prefix" | sed 's/.$//'`
- ;;
-*)
- dflt="$prefix"
- ;;
-esac
-$cat <<EOM
-
-By default, $package will be installed in $dflt/bin, manual pages
-under $dflt/man, etc..., i.e. with $dflt as prefix for all
-installation directories. Typically this is something like /usr/local.
-If you wish to have binaries under /usr/bin but other parts of the
-installation under /usr/local, that's ok: you will be prompted
-separately for each of the installation directories, the prefix being
-only used to set the defaults.
-
-EOM
-fn=d~
-rp='Installation prefix to use?'
-. ./getfile
-oldprefix=''
-case "$prefix" in
-'') ;;
-*)
- case "$ans" in
- "$prefix") ;;
- *) oldprefix="$prefix";;
- esac
- ;;
-esac
-prefix="$ans"
-prefixexp="$ansexp"
-
-case "$afsroot" in
-'') afsroot=/afs ;;
-*) afsroot=$afsroot ;;
-esac
-
-: is AFS running?
+: is AFS running?
echo " "
case "$afs" in
$define|true) afs=true ;;
eval $setvar
: see if this is a malloc.h system
-set malloc.h i_malloc
-eval $inhdr
-
-: see if stdlib is available
-set stdlib.h i_stdlib
-eval $inhdr
+: we want a real compile instead of Inhdr because some systems have a
+: malloc.h that just gives a compile error saying to use stdlib.h instead
+echo " "
+$cat >try.c <<EOCP
+#include <stdlib.h>
+#include <malloc.h>
+int main () { return 0; }
+EOCP
+set try
+if eval $compile; then
+ echo "<malloc.h> found." >&4
+ val="$define"
+else
+ echo "<malloc.h> NOT found." >&4
+ val="$undef"
+fi
+$rm -f try.c try
+set i_malloc
+eval $setvar
: check for void type
echo " "
echo "Checking to see how well your C compiler groks the void type..." >&4
case "$voidflags" in
'')
- $cat >try.c <<'EOCP'
+ $cat >try.c <<EOCP
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
#if TRY & 1
void sub() {
#else
else
echo '#define VOID_PTR void *' > try.c
fi
- $cat >>try.c <<'EOCP'
+ $cat >>try.c <<EOCP
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
int main()
{
printf("%d\n", (int)sizeof(VOID_PTR));
case "$ptrsize" in
4) cat <<EOM >&4
-*** You have chosen a maximally 64-bit build, but your pointers
-*** are only 4 bytes wide, disabling maximal 64-bitness.
-
+*** You have chosen a maximally 64-bit build,
+*** but your pointers are only 4 bytes wide.
+*** Please rerun Configure without -Duse64bitall.
EOM
- use64bitall="$undef"
- case "$use64bitint" in
- "$define"|true|[yY]*) ;;
- *) cat <<EOM >&4
-
-*** Downgrading from maximal 64-bitness to using 64-bit integers.
-
+ case "$d_quad" in
+ define)
+ cat <<EOM >&4
+*** Since you have quads, you could possibly try with -Duse64bitint.
EOM
- use64bitint="$define"
;;
esac
+ cat <<EOM >&4
+*** Cannot continue, aborting.
+
+EOM
+
+ exit 1
;;
esac
;;
esac
+: determine whether to use malloc wrapping
+echo " "
+case "$usemallocwrap" in
+[yY]*|true|$define) dflt='y' ;;
+[nN]*|false|$undef) dflt='n' ;;
+*) case "$usedevel" in
+ [yY]*|true|$define) dflt='y' ;;
+ *) dflt='n' ;;
+ esac
+ ;;
+esac
+rp="Do you wish to wrap malloc calls to protect against potential overflows?"
+. ./myread
+usemallocwrap="$ans"
+case "$ans" in
+y*|true)
+ usemallocwrap="$define" ;;
+*)
+ usemallocwrap="$undef" ;;
+esac
+
: determine which malloc to compile in
echo " "
case "$usemymalloc" in
: Cruising for prototypes
echo " "
echo "Checking out function prototypes..." >&4
-$cat >prototype.c <<'EOCP'
+$cat >prototype.c <<EOCP
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
int main(int argc, char *argv[]) {
exit(0);}
EOCP
}
}
-if (@inc_version_list) {
- print join(' ', @inc_version_list);
-}
-else {
- # Blank space to preserve value for next Configure run.
- print " ";
-}
-EOPL
-chmod +x getverlist
-case "$inc_version_list" in
-'') if test -x "$perl5$exe_ext"; then
- dflt=`$perl5 getverlist`
- else
- dflt='none'
- fi
+if (@inc_version_list) {
+ print join(' ', @inc_version_list);
+}
+else {
+ # Blank space to preserve value for next Configure run.
+ print " ";
+}
+EOPL
+chmod +x getverlist
+case "$inc_version_list" in
+'') if test -x "$perl5$exe_ext"; then
+ dflt=`$perl5 getverlist`
+ else
+ dflt='none'
+ fi
+ ;;
+$undef) dflt='none' ;;
+*) eval dflt=\"$inc_version_list\" ;;
+esac
+case "$dflt" in
+''|' ') dflt=none ;;
+esac
+case "$dflt" in
+5.005) dflt=none ;;
+esac
+$cat <<EOM
+
+In order to ease the process of upgrading, this version of perl
+can be configured to use modules built and installed with earlier
+versions of perl that were installed under $prefix. Specify here
+the list of earlier versions that this version of perl should check.
+If Configure detected no earlier versions of perl installed under
+$prefix, then the list will be empty. Answer 'none' to tell perl
+to not search earlier versions.
+
+The default should almost always be sensible, so if you're not sure,
+just accept the default.
+EOM
+
+rp='List of earlier versions to include in @INC?'
+. ./myread
+case "$ans" in
+[Nn]one|''|' '|$undef) inc_version_list=' ' ;;
+*) inc_version_list="$ans" ;;
+esac
+case "$inc_version_list" in
+''|' ')
+ inc_version_list_init='0';;
+*) inc_version_list_init=`echo $inc_version_list |
+ $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
+ ;;
+esac
+$rm -f getverlist
+
+: determine whether to install perl also as /usr/bin/perl
+
+echo " "
+if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
+ $cat <<EOM
+Many scripts expect perl to be installed as /usr/bin/perl.
+
+If you want to, I can install the perl you are about to compile
+as /usr/bin/perl (in addition to $bin/perl).
+EOM
+ if test -f /usr/bin/perl; then
+ $cat <<EOM
+
+However, please note that because you already have a /usr/bin/perl,
+overwriting that with a new Perl would very probably cause problems.
+Therefore I'm assuming you don't want to do that (unless you insist).
+
+EOM
+ case "$installusrbinperl" in
+ "$define"|[yY]*) dflt='y';;
+ *) dflt='n';;
+ esac
+ else
+ $cat <<EOM
+
+Since you don't have a /usr/bin/perl I'm assuming creating one is okay.
+
+EOM
+ case "$installusrbinperl" in
+ "$undef"|[nN]*) dflt='n';;
+ *) dflt='y';;
+ esac
+ fi
+ rp="Do you want to install perl as /usr/bin/perl?"
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef" ;;
+ esac
+else
+ val="$undef"
+fi
+set installusrbinperl
+eval $setvar
+
+echo " "
+echo "Checking for GNU C Library..." >&4
+cat >try.c <<'EOCP'
+/* Find out version of GNU C library. __GLIBC__ and __GLIBC_MINOR__
+ alone are insufficient to distinguish different versions, such as
+ 2.0.6 and 2.0.7. The function gnu_get_libc_version() appeared in
+ libc version 2.1.0. A. Dougherty, June 3, 2002.
+*/
+#include <stdio.h>
+int main(void)
+{
+#ifdef __GLIBC__
+# ifdef __GLIBC_MINOR__
+# if __GLIBC__ >= 2 && __GLIBC_MINOR__ >= 1
+# include <gnu/libc-version.h>
+ printf("%s\n", gnu_get_libc_version());
+# else
+ printf("%d.%d\n", __GLIBC__, __GLIBC_MINOR__);
+# endif
+# else
+ printf("%d\n", __GLIBC__);
+# endif
+ return 0;
+#else
+ return 1;
+#endif
+}
+EOCP
+set try
+if eval $compile_ok && $run ./try > glibc.ver; then
+ val="$define"
+ gnulibc_version=`$cat glibc.ver`
+ echo "You are using the GNU C Library version $gnulibc_version"
+else
+ val="$undef"
+ gnulibc_version=''
+ echo "You are not using the GNU C Library"
+fi
+$rm -f try try.* glibc.ver
+set d_gnulibc
+eval $setvar
+
+: see if nm is to be used to determine whether a symbol is defined or not
+case "$usenm" in
+'')
+ dflt=''
+ case "$d_gnulibc" in
+ "$define")
+ echo " "
+ echo "nm probably won't work on the GNU C Library." >&4
+ dflt=n
+ ;;
+ esac
+ case "$dflt" in
+ '')
+ if $test "$osname" = aix -a "X$PASE" != "Xdefine" -a ! -f /lib/syscalls.exp; then
+ echo " "
+ echo "Whoops! This is an AIX system without /lib/syscalls.exp!" >&4
+ echo "'nm' won't be sufficient on this sytem." >&4
+ dflt=n
+ fi
+ ;;
+ esac
+ case "$dflt" in
+ '') dflt=`$egrep 'inlibc|csym' $rsrc/Configure | wc -l 2>/dev/null`
+ if $test $dflt -gt 20; then
+ dflt=y
+ else
+ dflt=n
+ fi
+ ;;
+ esac
+ ;;
+*)
+ case "$usenm" in
+ true|$define) dflt=y;;
+ *) dflt=n;;
+ esac
;;
-$undef) dflt='none' ;;
-*) eval dflt=\"$inc_version_list\" ;;
-esac
-case "$dflt" in
-''|' ') dflt=none ;;
-esac
-case "$dflt" in
-5.005) dflt=none ;;
esac
$cat <<EOM
-In order to ease the process of upgrading, this version of perl
-can be configured to use modules built and installed with earlier
-versions of perl that were installed under $prefix. Specify here
-the list of earlier versions that this version of perl should check.
-If Configure detected no earlier versions of perl installed under
-$prefix, then the list will be empty. Answer 'none' to tell perl
-to not search earlier versions.
+I can use $nm to extract the symbols from your C libraries. This
+is a time consuming task which may generate huge output on the disk (up
+to 3 megabytes) but that should make the symbols extraction faster. The
+alternative is to skip the 'nm' extraction part and to compile a small
+test program instead to determine whether each symbol is present. If
+you have a fast C compiler and/or if your 'nm' output cannot be parsed,
+this may be the best solution.
-The default should almost always be sensible, so if you're not sure,
-just accept the default.
-EOM
+You probably shouldn't let me use 'nm' if you are using the GNU C Library.
-rp='List of earlier versions to include in @INC?'
+EOM
+rp="Shall I use $nm to extract C symbols from the libraries?"
. ./myread
case "$ans" in
-[Nn]one|''|' ') inc_version_list=' ' ;;
-*) inc_version_list="$ans" ;;
+[Nn]*) usenm=false;;
+*) usenm=true;;
esac
-case "$inc_version_list" in
-''|' ')
- inc_version_list_init='0';;
-*) inc_version_list_init=`echo $inc_version_list |
- $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
- ;;
+
+runnm=$usenm
+case "$reuseval" in
+true) runnm=false;;
esac
-$rm -f getverlist
-: determine whether to install perl also as /usr/bin/perl
+: nm options which may be necessary
+case "$nm_opt" in
+'') if $test -f /mach_boot; then
+ nm_opt='' # Mach
+ elif $test -d /usr/ccs/lib; then
+ nm_opt='-p' # Solaris (and SunOS?)
+ elif $test -f /dgux; then
+ nm_opt='-p' # DG-UX
+ elif $test -f /lib64/rld; then
+ nm_opt='-p' # 64-bit Irix
+ else
+ nm_opt=''
+ fi;;
+esac
+
+: nm options which may be necessary for shared libraries but illegal
+: for archive libraries. Thank you, Linux.
+case "$nm_so_opt" in
+'') case "$myuname" in
+ *linux*|gnu*)
+ if $nm --help | $grep 'dynamic' > /dev/null 2>&1; then
+ nm_so_opt='--dynamic'
+ fi
+ ;;
+ esac
+ ;;
+esac
+case "$runnm" in
+true)
+: get list of predefined functions in a handy place
echo " "
-if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
- $cat <<EOM
-Many scripts expect perl to be installed as /usr/bin/perl.
+case "$libc" in
+'') libc=unknown
+ case "$libs" in
+ *-lc_s*) libc=`./loc libc_s$_a $libc $libpth`
+ esac
+ ;;
+esac
+case "$libs" in
+'') ;;
+*) for thislib in $libs; do
+ case "$thislib" in
+ -lc|-lc_s)
+ : Handle C library specially below.
+ ;;
+ -l*)
+ thislib=`echo $thislib | $sed -e 's/^-l//'`
+ if try=`./loc lib$thislib.$so.'*' X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib$_a X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc $thislib$_a X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$try"; then
+ :
+ else
+ try=''
+ fi
+ libnames="$libnames $try"
+ ;;
+ *) libnames="$libnames $thislib" ;;
+ esac
+ done
+ ;;
+esac
+xxx=normal
+case "$libc" in
+unknown)
+ set /lib/libc.$so
+ for xxx in $libpth; do
+ $test -r $1 || set $xxx/libc.$so
+ : The messy sed command sorts on library version numbers.
+ $test -r $1 || \
+ set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
+ tr ' ' $trnl | egrep -v '\.[A-Za-z]*$' | $sed -e '
+ h
+ s/[0-9][0-9]*/0000&/g
+ s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
+ G
+ s/\n/ /' | \
+ $sort | $sed -e 's/^.* //'`
+ eval set \$$#
+ done
+ $test -r $1 || set /usr/ccs/lib/libc.$so
+ $test -r $1 || set /lib/libsys_s$_a
+ ;;
+*)
+ set blurfl
+ ;;
+esac
+if $test -r "$1"; then
+ echo "Your (shared) C library seems to be in $1."
+ libc="$1"
+elif $test -r /lib/libc && $test -r /lib/clib; then
+ echo "Your C library seems to be in both /lib/clib and /lib/libc."
+ xxx=apollo
+ libc='/lib/clib /lib/libc'
+ if $test -r /lib/syslib; then
+ echo "(Your math library is in /lib/syslib.)"
+ libc="$libc /lib/syslib"
+ fi
+elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
+ echo "Your C library seems to be in $libc, as you said before."
+elif $test -r $incpath/usr/lib/libc$_a; then
+ libc=$incpath/usr/lib/libc$_a;
+ echo "Your C library seems to be in $libc. That's fine."
+elif $test -r /lib/libc$_a; then
+ libc=/lib/libc$_a;
+ echo "Your C library seems to be in $libc. You're normal."
+else
+ if tans=`./loc libc$_a blurfl/dyick $libpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
+ libnames="$libnames "`./loc clib blurfl/dyick $libpth`
+ elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc Slibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc Mlibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ :
+ else
+ tans=`./loc Llibc$_a blurfl/dyick $xlibpth`
+ fi
+ if $test -r "$tans"; then
+ echo "Your C library seems to be in $tans, of all places."
+ libc=$tans
+ else
+ libc='blurfl'
+ fi
+fi
+if $test $xxx = apollo -o -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
+ dflt="$libc"
+ cat <<EOM
+
+If the guess above is wrong (which it might be if you're using a strange
+compiler, or your machine supports multiple models), you can override it here.
-If you want to, I can install the perl you are about to compile
-as /usr/bin/perl (in addition to $bin/perl).
EOM
- if test -f /usr/bin/perl; then
- $cat <<EOM
+else
+ dflt=''
+ echo $libpth | $tr ' ' $trnl | $sort | $uniq > libpath
+ cat >&4 <<EOM
+I can't seem to find your C library. I've looked in the following places:
-However, please note that because you already have a /usr/bin/perl,
-overwriting that with a new Perl would very probably cause problems.
-Therefore I'm assuming you don't want to do that (unless you insist).
+EOM
+ $sed 's/^/ /' libpath
+ cat <<EOM
+
+None of these seems to contain your C library. I need to get its name...
EOM
- case "$installusrbinperl" in
- "$define"|[yY]*) dflt='y';;
- *) dflt='n';;
- esac
- else
- $cat <<EOM
+fi
+fn=f
+rp='Where is your C library?'
+. ./getfile
+libc="$ans"
-Since you don't have a /usr/bin/perl I'm assuming creating one is okay.
+echo " "
+echo $libc $libnames | $tr ' ' $trnl | $sort | $uniq > libnames
+set X `cat libnames`
+shift
+xxx=files
+case $# in 1) xxx=file; esac
+echo "Extracting names from the following $xxx for later perusal:" >&4
+echo " "
+$sed 's/^/ /' libnames >&4
+echo " "
+$echo $n "This may take a while...$c" >&4
-EOM
- case "$installusrbinperl" in
- "$undef"|[nN]*) dflt='n';;
- *) dflt='y';;
- esac
- fi
- rp="Do you want to install perl as /usr/bin/perl?"
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef" ;;
+for file in $*; do
+ case $file in
+ *$so*) $nm $nm_so_opt $nm_opt $file 2>/dev/null;;
+ *) $nm $nm_opt $file 2>/dev/null;;
esac
+done >libc.tmp
+
+$echo $n ".$c"
+$grep fprintf libc.tmp > libc.ptf
+xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
+xrun='eval "<libc.tmp $com >libc.list"; echo "done." >&4'
+xxx='[ADTSIW]'
+if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^__*//' -e 's/^\([a-zA-Z_0-9$]*\).*xtern.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e '/|UNDEF/d' -e '/FUNC..GL/s/^.*|__*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.* D __*//p' -e 's/^.* D //p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^_//' -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$grep '|' | $sed -n -e '/|COMMON/d' -e '/|DATA/d' \
+ -e '/ file/d' -e 's/^\([^ ]*\).*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p' -e 's/^.*|FUNC |WEAK .*|//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^__//' -e '/|Undef/d' -e '/|Proc/s/ .*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|Proc .*|Text *| *//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^[-0-9a-f ]*_\(.*\)=.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/.*\.text n\ \ \ \.//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="sed -n -e 's/^__.*//' -e 's/[ ]*D[ ]*[0-9]*.*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
else
- val="$undef"
+ $nm -p $* 2>/dev/null >libc.tmp
+ $grep fprintf libc.tmp > libc.ptf
+ if com="$sed -n -e 's/^.* [ADTSIW] *_[_.]*//p' -e 's/^.* [ADTSIW] //p'";\
+ eval $xscan; $contains '^fprintf$' libc.list >/dev/null 2>&1
+ then
+ nm_opt='-p'
+ eval $xrun
+ else
+ echo " "
+ echo "$nm didn't seem to work right. Trying $ar instead..." >&4
+ com=''
+ if $ar t $libc > libc.tmp && $contains '^fprintf$' libc.tmp >/dev/null 2>&1; then
+ for thisname in $libnames $libc; do
+ $ar t $thisname >>libc.tmp
+ done
+ $sed -e "s/\\$_o\$//" < libc.tmp > libc.list
+ echo "Ok." >&4
+ elif test "X$osname" = "Xos2" && $ar tv $libc > libc.tmp; then
+ # Repeat libc to extract forwarders to DLL entries too
+ for thisname in $libnames $libc; do
+ $ar tv $thisname >>libc.tmp
+ # Revision 50 of EMX has bug in $ar.
+ # it will not extract forwarders to DLL entries
+ # Use emximp which will extract exactly them.
+ emximp -o tmp.imp $thisname \
+ 2>/dev/null && \
+ $sed -e 's/^\([_a-zA-Z0-9]*\) .*$/\1/p' \
+ < tmp.imp >>libc.tmp
+ $rm tmp.imp
+ done
+ $sed -e "s/\\$_o\$//" -e 's/^ \+//' < libc.tmp > libc.list
+ echo "Ok." >&4
+ else
+ echo "$ar didn't seem to work right." >&4
+ echo "Maybe this is a Cray...trying bld instead..." >&4
+ if bld t $libc | $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" > libc.list
+ then
+ for thisname in $libnames; do
+ bld t $libnames | \
+ $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" >>libc.list
+ $ar t $thisname >>libc.tmp
+ done
+ echo "Ok." >&4
+ else
+ echo "That didn't work either. Giving up." >&4
+ exit 1
+ fi
+ fi
+ fi
fi
-set installusrbinperl
-eval $setvar
+nm_extract="$com"
+case "$PASE" in
+define)
+ echo " "
+ echo "Since you are compiling for PASE, extracting more symbols from libc.a ...">&4
+ dump -Tv /lib/libc.a | awk '$7 == "/unix" {print $5 " " $8}' | grep "^SV" | awk '{print $2}' >> libc.list
+ ;;
+*) if $test -f /lib/syscalls.exp; then
+ echo " "
+ echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
+ $sed -n 's/^\([^ ]*\)[ ]*syscall[0-9]*[ ]*$/\1/p' /lib/syscalls.exp >>libc.list
+ fi
+ ;;
+esac
+;;
+esac
+$rm -f libnames libpath
: see if dld is available
set dld.h i_dld
eval $inhdr
+: is a C symbol defined?
+csym='tlook=$1;
+case "$3" in
+-v) tf=libc.tmp; tdc="";;
+-a) tf=libc.tmp; tdc="[]";;
+*) tlook="^$1\$"; tf=libc.list; tdc="()";;
+esac;
+tx=yes;
+case "$reuseval-$4" in
+true-) ;;
+true-*) tx=no; eval "tval=\$$4"; case "$tval" in "") tx=yes;; esac;;
+esac;
+case "$tx" in
+yes)
+ tval=false;
+ if $test "$runnm" = true; then
+ if $contains $tlook $tf >/dev/null 2>&1; then
+ tval=true;
+ elif $test "$mistrustnm" = compile -o "$mistrustnm" = run; then
+ echo "void *(*(p()))$tdc { extern void *$1$tdc; return &$1; } int main() { if(p()) return(0); else return(1); }"> try.c;
+ $cc -o try $optimize $ccflags $ldflags try.c >/dev/null 2>&1 $libs && tval=true;
+ $test "$mistrustnm" = run -a -x try && { $run ./try$_exe >/dev/null 2>&1 || tval=false; };
+ $rm -f try$_exe try.c core core.* try.core;
+ fi;
+ else
+ echo "void *(*(p()))$tdc { extern void *$1$tdc; return &$1; } int main() { if(p()) return(0); else return(1); }"> try.c;
+ $cc -o try $optimize $ccflags $ldflags try.c $libs >/dev/null 2>&1 && tval=true;
+ $rm -f try$_exe try.c;
+ fi;
+ ;;
+*)
+ case "$tval" in
+ $define) tval=true;;
+ *) tval=false;;
+ esac;
+ ;;
+esac;
+eval "$2=$tval"'
+
+: define an is-in-libc? function
+inlibc='echo " "; td=$define; tu=$undef;
+sym=$1; var=$2; eval "was=\$$2";
+tx=yes;
+case "$reuseval$was" in
+true) ;;
+true*) tx=no;;
+esac;
+case "$tx" in
+yes)
+ set $sym tres -f;
+ eval $csym;
+ case "$tres" in
+ true)
+ echo "$sym() found." >&4;
+ case "$was" in $undef) . ./whoa; esac; eval "$var=\$td";;
+ *)
+ echo "$sym() NOT found." >&4;
+ case "$was" in $define) . ./whoa; esac; eval "$var=\$tu";;
+ esac;;
+*)
+ case "$was" in
+ $define) echo "$sym() found." >&4;;
+ *) echo "$sym() NOT found." >&4;;
+ esac;;
+esac'
+
: see if dlopen exists
xxx_runnm="$runnm"
runnm=false
EOM
case "$ld" in
- '') $cat >try.c <<'EOM'
+ '') $cat >try.c <<EOM
/* Test for whether ELF binaries are produced */
#include <fcntl.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
#include <stdlib.h>
+#endif
int main() {
char b[4];
int i = open("a.out",O_RDONLY);
'') dflt="$dflt +vnocompatwarnings" ;;
esac
;;
- linux|irix*) dflt='-shared' ;;
+ linux|irix*|gnu*) dflt='-shared' ;;
next) dflt='none' ;;
solaris) dflt='-G' ;;
sunos) dflt='-assert nodefinitions' ;;
EOM
case "$ccdlflags" in
'') case "$osname" in
- hpux) dflt='-Wl,-E' ;;
- linux) dflt='-rdynamic' ;;
- next) dflt='none' ;;
- sunos) dflt='none' ;;
- *) dflt='none' ;;
+ linux|hpux|gnu*) dflt='-Wl,-E' ;;
+ next|sunos) dflt='none' ;;
+ *) dflt='none' ;;
esac ;;
' ') dflt='none' ;;
*) dflt="$ccdlflags" ;;
your system supports dynamic loading, it is probably possible to build
a shared libperl.$so. If you will have more than one executable linked
to libperl.$so, this will significantly reduce the size of each
-executable, but it may have a noticeable affect on performance. The
+executable, but it may have a noticeable effect on performance. The
default is probably sensible for your system.
$also
dflt=libperl.5.$so
# XXX How handle the --version stuff for MAB?
;;
- linux*) # ld won't link with a bare -lperl otherwise.
+ linux*|gnu*) # ld won't link with a bare -lperl otherwise.
dflt=libperl.$so
;;
cygwin*) # ld links against an importlib
solaris)
xxx="-R $shrpdir"
;;
- freebsd|netbsd|openbsd)
+ freebsd|netbsd|openbsd|interix)
xxx="-Wl,-R$shrpdir"
;;
- bsdos|linux|irix*|dec_osf)
+ bsdos|linux|irix*|dec_osf|gnu*)
xxx="-Wl,-rpath,$shrpdir"
;;
next)
fi
: determine where add-on html pages go
-: There is no standard location, so try to copy the previously-selected
+: There is no standard location, so try to copy the previously-selected
: directory structure for the core html pages.
-case "$sitehtml1" in
-'') dflt=`echo "$html1dir" | $sed "s#^$prefix#$siteprefix#"` ;;
-*) dflt=$sitehtml1 ;;
+case "$sitehtml1dir" in
+'') dflt=`echo "$html1dir" | $sed "s#^$prefix#$siteprefix#"` ;;
+*) dflt=$sitehtml1dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=dn+~
rp='Pathname where the site-specific html pages should be installed?'
. ./getfile
-sitehtml1="$ans"
-sitehtml1exp="$ansexp"
-: Use ' ' for none so value is preserved next time through Configure
-$test X"$sitehtml1" = "X" && sitehtml1=' '
+sitehtml1dir="$ans"
+sitehtml1direxp="$ansexp"
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installsitehtml1=`echo "$sitehtml1exp" | $sed "s#^$prefix#$installprefix#"`
+ installsitehtml1dir=`echo $sitehtml1direxp | $sed "s#^$prefix#$installprefix#"`
else
- installsitehtml1="$sitehtml1exp"
+ installsitehtml1dir="$sitehtml1direxp"
fi
: determine where add-on library html pages go
: There is no standard location, so try to copy the previously-selected
: directory structure for the core html pages.
-case "$sitehtml3" in
-'') dflt=`echo "$html3dir" | $sed "s#^$prefix#$siteprefix#"` ;;
-*) dflt=$sitehtml3 ;;
+case "$sitehtml3dir" in
+'') dflt=`echo "$html3dir" | $sed "s#^$prefix#$siteprefix#"` ;;
+*) dflt=$sitehtml3dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=dn+~
rp='Pathname where the site-specific library html pages should be installed?'
. ./getfile
-sitehtml3="$ans"
-sitehtml3exp="$ansexp"
-: Use ' ' for none so value is preserved next time through Configure
-$test X"$sitehtml3" = "X" && sitehtml3=' '
+sitehtml3dir="$ans"
+sitehtml3direxp="$ansexp"
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installsitehtml3=`echo "$sitehtml3exp" | $sed "s#^$prefix#$installprefix#"`
+ installsitehtml3dir=`echo $sitehtml3direxp | $sed "s#^$prefix#$installprefix#"`
else
- installsitehtml3="$sitehtml3exp"
+ installsitehtml3dir="$sitehtml3direxp"
fi
: determine where add-on manual pages go
-case "$siteman1" in
-'') dflt=`echo "$man1dir" | $sed "s#^$prefix#$siteprefix#"` ;;
-*) dflt=$siteman1 ;;
+case "$siteman1dir" in
+'') dflt=`echo $man1dir | $sed "s#^$prefix#$siteprefix#"` ;;
+*) dflt=$siteman1dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=dn+~
rp='Pathname where the site-specific manual pages should be installed?'
. ./getfile
-siteman1="$ans"
-siteman1exp="$ansexp"
-: Use ' ' for none so value is preserved next time through Configure
-$test X"$siteman1" = "X" && siteman1=' '
+siteman1dir="$ans"
+siteman1direxp="$ansexp"
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installsiteman1=`echo "$siteman1exp" | $sed "s#^$prefix#$installprefix#"`
+ installsiteman1dir=`echo $siteman1direxp | $sed "s#^$prefix#$installprefix#"`
else
- installsiteman1="$siteman1exp"
+ installsiteman1dir="$siteman1direxp"
fi
: determine where add-on library man pages go
-case "$siteman3" in
-'') dflt=`echo "$man3dir" | $sed "s#^$prefix#$siteprefix#"` ;;
-*) dflt=$siteman3 ;;
+case "$siteman3dir" in
+'') dflt=`echo $man3dir | $sed "s#^$prefix#$siteprefix#"` ;;
+*) dflt=$siteman3dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=dn+~
rp='Pathname where the site-specific library manual pages should be installed?'
. ./getfile
-siteman3="$ans"
-siteman3exp="$ansexp"
-: Use ' ' for none so value is preserved next time through Configure
-$test X"$siteman3" = "X" && siteman3=' '
+siteman3dir="$ans"
+siteman3direxp="$ansexp"
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installsiteman3=`echo "$siteman3exp" | $sed "s#^$prefix#$installprefix#"`
+ installsiteman3dir=`echo $siteman3direxp | $sed "s#^$prefix#$installprefix#"`
else
- installsiteman3="$siteman3exp"
+ installsiteman3dir="$siteman3direxp"
fi
: determine where add-on public executable scripts go
installsitescript="$sitescriptexp"
fi
+case "$usefaststdio" in
+$define|true|[yY]*|'')
+ xversion=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
+ case "$xversion" in
+ [68]) dflt='y' ;;
+ *) dflt='n' ;;
+ esac
+ ;;
+*) dflt='n';;
+esac
+cat <<EOM
+
+Perl can be built to use 'fast stdio', which means using the stdio
+library but also directly manipulating the stdio buffers to enable
+faster I/O. Using stdio is better for backward compatibility (especially
+for Perl extensions), but on the other hand since Perl 5.8 the 'perlio'
+interface has been preferred instead of stdio.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Use the "fast stdio" if available?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set usefaststdio
+eval $setvar
+
+
: define an is-a-typedef? function
typedef='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
case "$inclist" in
cat > try.c <<EOCP
#include <sys/types.h>
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
int main() {
printf("%d\n", (int)sizeof($fpostype));
exit(0);
rp="What is the size of your file positions (in bytes)?"
. ./myread
fpossize="$ans"
-fi
-
-
+fi
# Backward compatibility (uselfs is deprecated).
case "$uselfs" in
esac
set uselargefiles
eval $setvar
-case "$uselargefiles" in
-"$define")
: Look for a hint-file generated 'call-back-unit'. If the
: user has specified that a large files perl is to be built,
: we may need to set or change some other defaults.
+if $test -f uselargefiles.cbu; then
+ echo "Your platform has some specific hints regarding large file builds, using them..."
+ . ./uselargefiles.cbu
+fi
+case "$uselargefiles" in
+"$define")
if $test -f uselargefiles.cbu; then
- echo "Your platform has some specific hints for large file builds, using them..."
- . ./uselargefiles.cbu
echo " "
echo "Rechecking to see how big your file offsets are..." >&4
$cat >try.c <<EOCP
$cat > try.c <<EOCP
#include <sys/types.h>
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
int main() {
printf("%d\n", (int)sizeof($fpostype));
- exit(0);
+ return(0);
}
EOCP
set try
;;
esac
+# probably will refer to
+# $archlib $privlib $sitearch $sitelib $vendorarch $vendorlib
+need_relocation=0
+userelocatableinc=undef
+
case "$vendorprefix" in
'') d_vendorbin="$undef"
vendorbin=''
fi
case "$vendorprefix" in
-'') vendorhtml1=''
- vendorhtml1exp=''
+'') vendorhtml1dir=''
+ vendorhtml1direxp=''
;;
*) : determine where vendor-supplied html pages go.
: There is no standard location, so try to copy the previously-selected
: directory structure for the core html pages.
: XXX Better default suggestions would be welcome.
- case "$vendorhtml1" in
+ case "$vendorhtml1dir" in
'') dflt=`echo "$html1dir" | $sed "s#^$prefix#$vendorprefix#"` ;;
- *) dflt=$vendorhtml1 ;;
+ *) dflt=$vendorhtml1dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=dn+~
rp='Pathname for the vendor-supplied html pages?'
. ./getfile
- vendorhtml1="$ans"
- vendorhtml1exp="$ansexp"
+ vendorhtml1dir="$ans"
+ vendorhtml1direxp="$ansexp"
;;
esac
: Use ' ' for none so value is preserved next time through Configure
-$test X"$vendorhtml1" = "X" && vendorhtml1=' '
+$test X"$vendorhtml1dir" = "X" && vendorhtml1dir=' '
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installvendorhtml1=`echo $vendorhtml1exp | $sed "s#^$prefix#$installprefix#"`
+ installvendorhtml1dir=`echo $vendorhtml1direxp | $sed "s#^$prefix#$installprefix#"`
else
- installvendorhtml1="$vendorhtml1exp"
+ installvendorhtml1dir="$vendorhtml1direxp"
fi
case "$vendorprefix" in
-'') vendorhtml3=''
- vendorhtml3exp=''
+'') vendorhtml3dir=''
+ vendorhtml3direxp=''
;;
*) : determine where vendor-supplied module html pages go.
: There is no standard location, so try to copy the previously-selected
: directory structure for the core html pages.
: XXX Better default suggestions would be welcome.
- case "$vendorhtml3" in
+ case "$vendorhtml3dir" in
'') dflt=`echo "$html3dir" | $sed "s#^$prefix#$vendorprefix#"` ;;
- *) dflt=$vendorhtml3 ;;
+ *) dflt=$vendorhtml3dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=dn+~
rp='Pathname for the vendor-supplied html pages?'
. ./getfile
- vendorhtml3="$ans"
- vendorhtml3exp="$ansexp"
+ vendorhtml3dir="$ans"
+ vendorhtml3direxp="$ansexp"
;;
esac
: Use ' ' for none so value is preserved next time through Configure
-$test X"$vendorhtml3" = "X" && vendorhtml3=' '
+$test X"$vendorhtml3dir" = "X" && vendorhtml3dir=' '
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installvendorhtml3=`echo $vendorhtml3exp | $sed "s#^$prefix#$installprefix#"`
+ installvendorhtml3dir=`echo $vendorhtml3direxp | $sed "s#^$prefix#$installprefix#"`
else
- installvendorhtml3="$vendorhtml3exp"
+ installvendorhtml3dir="$vendorhtml3direxp"
fi
case "$vendorprefix" in
-'') vendorman1=''
- vendorman1exp=''
+'') vendorman1dir=''
+ vendorman1direxp=''
;;
*) : determine where vendor-supplied manual pages go.
- case "$vendorman1" in
+ case "$vendorman1dir" in
'') dflt=`echo "$man1dir" | $sed "s#^$prefix#$vendorprefix#"` ;;
- *) dflt=$vendorman1 ;;
+ *) dflt=$vendorman1dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=nd~+
rp='Pathname for the vendor-supplied manual section 1 pages?'
. ./getfile
- vendorman1="$ans"
- vendorman1exp="$ansexp"
+ vendorman1dir="$ans"
+ vendorman1direxp="$ansexp"
;;
esac
: Use ' ' for none so value is preserved next time through Configure
-$test X"$vendorman1" = "X" && vendorman1=' '
+$test X"$vendorman1dir" = "X" && vendorman1dir=' '
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installvendorman1=`echo "$vendorman1exp" | $sed "s#^$prefix#$installprefix#"`
+ installvendorman1dir=`echo "$vendorman1direxp" | $sed "s#^$prefix#$installprefix#"`
else
- installvendorman1="$vendorman1exp"
+ installvendorman1dir="$vendorman1direxp"
fi
case "$vendorprefix" in
-'') vendorman3=''
- vendorman3exp=''
+'') vendorman3dir=''
+ vendorman3direxp=''
;;
*) : determine where vendor-supplied module manual pages go.
- case "$vendorman3" in
+ case "$vendorman3dir" in
'') dflt=`echo "$man3dir" | $sed "s#^$prefix#$vendorprefix#"` ;;
- *) dflt=$vendorman3 ;;
+ *) dflt=$vendorman3dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=nd~+
rp='Pathname for the vendor-supplied manual section 3 pages?'
. ./getfile
- vendorman3="$ans"
- vendorman3exp="$ansexp"
+ vendorman3dir="$ans"
+ vendorman3direxp="$ansexp"
;;
esac
: Use ' ' for none so value is preserved next time through Configure
-$test X"$vendorman3" = "X" && vendorman3=' '
+$test X"$vendorman3dir" = "X" && vendorman3dir=' '
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installvendorman3=`echo "$vendorman3exp" | $sed "s#^$prefix#$installprefix#"`
+ installvendorman3dir=`echo "$vendorman3direxp" | $sed "s#^$prefix#$installprefix#"`
else
- installvendorman3="$vendorman3exp"
+ installvendorman3dir="$vendorman3direxp"
fi
case "$vendorprefix" in
set qgcvt d_qgcvt
eval $inlibc
+echo " "
+
+if $test X"$d_longdbl" = X"$define"; then
+
+echo "Checking how to print long doubles..." >&4
+
+if $test X"$sPRIfldbl" = X -a X"$doublesize" = X"$longdblsize"; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ double d = 123.456;
+ printf("%.3f\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`$run ./try`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"f"'; sPRIgldbl='"g"'; sPRIeldbl='"e"';
+ sPRIFUldbl='"F"'; sPRIGUldbl='"G"'; sPRIEUldbl='"E"';
+ echo "We will use %f."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long double d = 123.456;
+ printf("%.3Lf\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`$run ./try`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"Lf"'; sPRIgldbl='"Lg"'; sPRIeldbl='"Le"';
+ sPRIFUldbl='"LF"'; sPRIGUldbl='"LG"'; sPRIEUldbl='"LE"';
+ echo "We will use %Lf."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long double d = 123.456;
+ printf("%.3llf\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`$run ./try`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"llf"'; sPRIgldbl='"llg"'; sPRIeldbl='"lle"';
+ sPRIFUldbl='"llF"'; sPRIGUldbl='"llG"'; sPRIEUldbl='"llE"';
+ echo "We will use %llf."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long double d = 123.456;
+ printf("%.3lf\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`$run ./try`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"lf"'; sPRIgldbl='"lg"'; sPRIeldbl='"le"';
+ sPRIFUldbl='"lF"'; sPRIGUldbl='"lG"'; sPRIEUldbl='"lE"';
+ echo "We will use %lf."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ echo "Cannot figure out how to print long doubles." >&4
+else
+ sSCNfldbl=$sPRIfldbl # expect consistency
+fi
+
+$rm -f try try.*
+
+fi # d_longdbl
+
+case "$sPRIfldbl" in
+'') d_PRIfldbl="$undef"; d_PRIgldbl="$undef"; d_PRIeldbl="$undef";
+ d_PRIFUldbl="$undef"; d_PRIGUldbl="$undef"; d_PRIEUldbl="$undef";
+ d_SCNfldbl="$undef";
+ ;;
+*) d_PRIfldbl="$define"; d_PRIgldbl="$define"; d_PRIeldbl="$define";
+ d_PRIFUldbl="$define"; d_PRIGUldbl="$define"; d_PRIEUldbl="$define";
+ d_SCNfldbl="$define";
+ ;;
+esac
+
: Check how to convert floats to strings.
if test "X$d_Gconvert" = X; then
case "$d_access" in
"$define")
echo " "
- $cat >access.c <<'EOCP'
+ $cat >access.c <<EOCP
#include <sys/types.h>
#ifdef I_FCNTL
#include <fcntl.h>
#ifdef I_UNISTD
#include <unistd.h>
#endif
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
int main() {
exit(R_OK);
}
set accessx d_accessx
eval $inlibc
+: see if aintl exists
+set aintl d_aintl
+eval $inlibc
+
: see if alarm exists
set alarm d_alarm
eval $inlibc
chmod +x protochk
$eunicefix protochk
+hasproto='varname=$1; func=$2; shift; shift;
+while $test $# -ge 2; do
+ case "$1" in
+ $define) echo "#include <$2>";;
+ esac ;
+ shift 2;
+done > try.c;
+$cppstdin $cppflags $cppminus < try.c > tryout.c 2>/dev/null;
+if $contains "$func.*(" tryout.c >/dev/null 2>&1; then
+ echo "$func() prototype found.";
+ val="$define";
+else
+ echo "$func() prototype NOT found.";
+ val="$undef";
+fi;
+set $varname;
+eval $setvar;
+$rm -f try.c tryout.c'
+
: see if sys/types.h has to be included
set sys/types.h i_systypes
eval $inhdr
if test "X$timeincl" = X; then
echo "Testing to see if we should include <time.h>, <sys/time.h> or both." >&4
$echo $n "I'm now running the test program...$c"
- $cat >try.c <<'EOCP'
+ $cat >try.c <<EOCP
#include <sys/types.h>
#ifdef I_TIME
#include <time.h>
#ifdef I_SYSSELECT
#include <sys/select.h>
#endif
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
int main()
{
struct tm foo;
;;
esac
-: see if atolf exists
-set atolf d_atolf
-eval $inlibc
-
-: see if atoll exists
-set atoll d_atoll
-eval $inlibc
+: see if atolf exists
+set atolf d_atolf
+eval $inlibc
+
+: see if atoll exists
+set atoll d_atoll
+eval $inlibc
+
+: Look for GCC-style attribute format
+case "$d_attribute_format" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((format)) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+void my_special_printf(char* pat,...) __attribute__((__format__(__printf__,1,2)));
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((format))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((format))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_format" ;;
+esac
+set d_attribute_format
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute malloc
+case "$d_attribute_malloc" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((malloc)) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+char *go_get_some_memory( int how_many_bytes ) __attribute__((malloc));
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((malloc))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((malloc))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_malloc" ;;
+esac
+set d_attribute_malloc
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute nonnull
+case "$d_attribute_nonnull" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((nonnull(1))) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+void do_something (char *some_pointer,...) __attribute__((nonnull(1)));
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((nonnull))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((nonnull))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_nonnull" ;;
+esac
+set d_attribute_nonnull
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute noreturn
+case "$d_attribute_noreturn" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((noreturn)) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+void fall_over_dead( void ) __attribute__((noreturn));
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((noreturn))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((noreturn))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_noreturn" ;;
+esac
+set d_attribute_noreturn
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute pure
+case "$d_attribute_pure" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((pure)) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+int square( int n ) __attribute__((pure));
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((pure))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((pure))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_pure" ;;
+esac
+set d_attribute_pure
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute unused
+case "$d_attribute_unused" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((unused)) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+int do_something( int dummy __attribute__((unused)), int n );
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((unused))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((unused))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_unused" ;;
+esac
+set d_attribute_unused
+eval $setvar
+$rm -f attrib*
-: Look for GNU-cc style attribute checking
+: Look for GCC-style attribute warn_unused_result
+case "$d_attribute_warn_unused_result" in
+'')
echo " "
-echo "Checking whether your compiler can handle __attribute__ ..." >&4
+echo "Checking whether your compiler can handle __attribute__((warn_unused_result)) ..." >&4
$cat >attrib.c <<'EOCP'
#include <stdio.h>
-void croak (char* pat,...) __attribute__((format(printf,1,2),noreturn));
+int I_will_not_be_ignored(void) __attribute__((warn_unused_result));
EOCP
if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
if $contains 'warning' attrib.out >/dev/null 2>&1; then
- echo "Your C compiler doesn't fully support __attribute__."
+ echo "Your C compiler doesn't support __attribute__((warn_unused_result))."
val="$undef"
else
- echo "Your C compiler supports __attribute__."
+ echo "Your C compiler supports __attribute__((warn_unused_result))."
val="$define"
fi
else
echo "Your C compiler doesn't seem to understand __attribute__ at all."
val="$undef"
fi
-set d_attribut
+;;
+*) val="$d_attribute_warn_unused_result" ;;
+esac
+set d_attribute_warn_unused_result
eval $setvar
$rm -f attrib*
#ifdef I_UNISTD
# include <unistd.h>
#endif
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
int main()
{
if (getuid() == 0) {
#ifdef I_UNISTD
# include <unistd.h>
#endif
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
int main()
{
if (getuid() == 0) {
fi
$cat >try.c <<EOCP
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
#include <sys/types.h>
#include <signal.h>
$signal_t blech(s) int s; { exit(3); }
i32 = ($xxx) g;
/* x86 processors will probably give 0x8000 0000, which is a
- sign change. We don't want that. We want to mimic SPARC
+ sign change. We don't want that. We want to mimic SPARC
behavior here, which is to preserve the sign and give
back 0x7fff ffff.
*/
echo 'Checking whether your C compiler can cast negative float to unsigned.' >&4
$cat >try.c <<EOCP
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
#include <sys/types.h>
#include <signal.h>
$signal_t blech(s) int s; { exit(7); }
if set vprintf val -f d_vprintf; eval $csym; $val; then
echo 'vprintf() found.' >&4
val="$define"
- $cat >try.c <<'EOF'
+ $cat >try.c <<EOF
#include <varargs.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
int main() { xxx("foo"); }
echo 'Checking to see if your C compiler knows about "const"...' >&4
$cat >const.c <<'EOCP'
typedef struct spug { int drokk; } spug;
-main()
+int main()
{
const char *foo;
const spug y;
set d_const
eval $setvar
+: see if copysignl exists
+set copysignl d_copysignl
+eval $inlibc
+
: see if crypt exists
echo " "
set crypt d_crypt
echo " "
$cat >dirfd.c <<EOM
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
#$i_dirent I_DIRENT /**/
#$i_sysdir I_SYS_DIR /**/
#$i_sysndir I_SYS_NDIR /**/
exit(1);
}
EOM
+val=$undef
set dirfd
if eval $compile; then
val="$define"
$cat >fred.c<<EOM
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
#$i_dlfcn I_DLFCN
#ifdef I_DLFCN
#include <dlfcn.h> /* the dynamic linker include file for SunOS/Solaris */
set endnetent d_endnent
eval $inlibc
-: see if endnetent_r exists
-set endnetent_r d_endnetent_r
+: see if endnetent_r exists
+set endnetent_r d_endnetent_r
+eval $inlibc
+case "$d_endnetent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_endnetent_r_proto:$usethreads" in
+ ":define") d_endnetent_r_proto=define
+ set d_endnetent_r_proto endnetent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_endnetent_r_proto" in
+ define)
+ case "$endnetent_r_proto" in
+ ''|0) try='int endnetent_r(struct netent_data*);'
+ ./protochk "extern $try" $hdrs && endnetent_r_proto=I_D ;;
+ esac
+ case "$endnetent_r_proto" in
+ ''|0) try='void endnetent_r(struct netent_data*);'
+ ./protochk "extern $try" $hdrs && endnetent_r_proto=V_D ;;
+ esac
+ case "$endnetent_r_proto" in
+ ''|0) d_endnetent_r=undef
+ endnetent_r_proto=0
+ echo "Disabling endnetent_r, cannot determine prototype." >&4 ;;
+ * ) case "$endnetent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) endnetent_r_proto="REENTRANT_PROTO_$endnetent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "endnetent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_endnetent_r=undef
+ endnetent_r_proto=0
+ ;;
+ esac
+ ;;
+*) endnetent_r_proto=0
+ ;;
+esac
+
+: see if endprotoent exists
+set endprotoent d_endpent
+eval $inlibc
+
+: see if endprotoent_r exists
+set endprotoent_r d_endprotoent_r
+eval $inlibc
+case "$d_endprotoent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_endprotoent_r_proto:$usethreads" in
+ ":define") d_endprotoent_r_proto=define
+ set d_endprotoent_r_proto endprotoent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_endprotoent_r_proto" in
+ define)
+ case "$endprotoent_r_proto" in
+ ''|0) try='int endprotoent_r(struct protoent_data*);'
+ ./protochk "extern $try" $hdrs && endprotoent_r_proto=I_D ;;
+ esac
+ case "$endprotoent_r_proto" in
+ ''|0) try='void endprotoent_r(struct protoent_data*);'
+ ./protochk "extern $try" $hdrs && endprotoent_r_proto=V_D ;;
+ esac
+ case "$endprotoent_r_proto" in
+ ''|0) d_endprotoent_r=undef
+ endprotoent_r_proto=0
+ echo "Disabling endprotoent_r, cannot determine prototype." >&4 ;;
+ * ) case "$endprotoent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) endprotoent_r_proto="REENTRANT_PROTO_$endprotoent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "endprotoent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_endprotoent_r=undef
+ endprotoent_r_proto=0
+ ;;
+ esac
+ ;;
+*) endprotoent_r_proto=0
+ ;;
+esac
+
+: see if endpwent exists
+set endpwent d_endpwent
+eval $inlibc
+
+: see if this is a pwd.h system
+set pwd.h i_pwd
+eval $inhdr
+
+case "$i_pwd" in
+$define)
+ xxx=`./findhdr pwd.h`
+ $cppstdin $cppflags $cppminus < $xxx >$$.h
+
+ if $contains 'pw_quota' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwquota
+ eval $setvar
+
+ if $contains 'pw_age' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwage
+ eval $setvar
+
+ if $contains 'pw_change' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwchange
+ eval $setvar
+
+ if $contains 'pw_class' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwclass
+ eval $setvar
+
+ if $contains 'pw_expire' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwexpire
+ eval $setvar
+
+ if $contains 'pw_comment' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwcomment
+ eval $setvar
+
+ if $contains 'pw_gecos' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwgecos
+ eval $setvar
+
+ if $contains 'pw_passwd' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwpasswd
+ eval $setvar
+
+ $rm -f $$.h
+ ;;
+*)
+ val="$undef";
+ set d_pwquota; eval $setvar
+ set d_pwage; eval $setvar
+ set d_pwchange; eval $setvar
+ set d_pwclass; eval $setvar
+ set d_pwexpire; eval $setvar
+ set d_pwcomment; eval $setvar
+ set d_pwgecos; eval $setvar
+ set d_pwpasswd; eval $setvar
+ ;;
+esac
+
+: see if endpwent_r exists
+set endpwent_r d_endpwent_r
eval $inlibc
-case "$d_endnetent_r" in
+case "$d_endpwent_r" in
"$define")
- hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
- case "$d_endnetent_r_proto:$usethreads" in
- ":define") d_endnetent_r_proto=define
- set d_endnetent_r_proto endnetent_r $hdrs
+ hdrs="$i_systypes sys/types.h define stdio.h $i_pwd pwd.h"
+ case "$d_endpwent_r_proto:$usethreads" in
+ ":define") d_endpwent_r_proto=define
+ set d_endpwent_r_proto endpwent_r $hdrs
eval $hasproto ;;
*) ;;
esac
- case "$d_endnetent_r_proto" in
+ case "$d_endpwent_r_proto" in
define)
- case "$endnetent_r_proto" in
- ''|0) try='int endnetent_r(struct netent_data*);'
- ./protochk "extern $try" $hdrs && endnetent_r_proto=I_D ;;
+ case "$endpwent_r_proto" in
+ ''|0) try='int endpwent_r(FILE**);'
+ ./protochk "extern $try" $hdrs && endpwent_r_proto=I_H ;;
esac
- case "$endnetent_r_proto" in
- ''|0) try='void endnetent_r(struct netent_data*);'
- ./protochk "extern $try" $hdrs && endnetent_r_proto=V_D ;;
+ case "$endpwent_r_proto" in
+ ''|0) try='void endpwent_r(FILE**);'
+ ./protochk "extern $try" $hdrs && endpwent_r_proto=V_H ;;
esac
- case "$endnetent_r_proto" in
- ''|0) d_endnetent_r=undef
- endnetent_r_proto=0
- echo "Disabling endnetent_r, cannot determine prototype." >&4 ;;
- * ) case "$endnetent_r_proto" in
+ case "$endpwent_r_proto" in
+ ''|0) d_endpwent_r=undef
+ endpwent_r_proto=0
+ echo "Disabling endpwent_r, cannot determine prototype." >&4 ;;
+ * ) case "$endpwent_r_proto" in
REENTRANT_PROTO*) ;;
- *) endnetent_r_proto="REENTRANT_PROTO_$endnetent_r_proto" ;;
+ *) endpwent_r_proto="REENTRANT_PROTO_$endpwent_r_proto" ;;
esac
echo "Prototype: $try" ;;
esac
;;
*) case "$usethreads" in
- define) echo "endnetent_r has no prototype, not using it." >&4 ;;
+ define) echo "endpwent_r has no prototype, not using it." >&4 ;;
esac
- d_endnetent_r=undef
- endnetent_r_proto=0
+ d_endpwent_r=undef
+ endpwent_r_proto=0
;;
esac
;;
-*) endnetent_r_proto=0
+*) endpwent_r_proto=0
;;
esac
-: see if endprotoent exists
-set endprotoent d_endpent
+: see if endservent exists
+set endservent d_endsent
eval $inlibc
-: see if endprotoent_r exists
-set endprotoent_r d_endprotoent_r
+: see if endservent_r exists
+set endservent_r d_endservent_r
eval $inlibc
-case "$d_endprotoent_r" in
+case "$d_endservent_r" in
"$define")
hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
- case "$d_endprotoent_r_proto:$usethreads" in
- ":define") d_endprotoent_r_proto=define
- set d_endprotoent_r_proto endprotoent_r $hdrs
+ case "$d_endservent_r_proto:$usethreads" in
+ ":define") d_endservent_r_proto=define
+ set d_endservent_r_proto endservent_r $hdrs
eval $hasproto ;;
*) ;;
esac
- case "$d_endprotoent_r_proto" in
+ case "$d_endservent_r_proto" in
define)
- case "$endprotoent_r_proto" in
- ''|0) try='int endprotoent_r(struct protoent_data*);'
- ./protochk "extern $try" $hdrs && endprotoent_r_proto=I_D ;;
+ case "$endservent_r_proto" in
+ ''|0) try='int endservent_r(struct servent_data*);'
+ ./protochk "extern $try" $hdrs && endservent_r_proto=I_D ;;
esac
- case "$endprotoent_r_proto" in
- ''|0) try='void endprotoent_r(struct protoent_data*);'
- ./protochk "extern $try" $hdrs && endprotoent_r_proto=V_D ;;
+ case "$endservent_r_proto" in
+ ''|0) try='void endservent_r(struct servent_data*);'
+ ./protochk "extern $try" $hdrs && endservent_r_proto=V_D ;;
esac
- case "$endprotoent_r_proto" in
- ''|0) d_endprotoent_r=undef
- endprotoent_r_proto=0
- echo "Disabling endprotoent_r, cannot determine prototype." >&4 ;;
- * ) case "$endprotoent_r_proto" in
+ case "$endservent_r_proto" in
+ ''|0) d_endservent_r=undef
+ endservent_r_proto=0
+ echo "Disabling endservent_r, cannot determine prototype." >&4 ;;
+ * ) case "$endservent_r_proto" in
REENTRANT_PROTO*) ;;
- *) endprotoent_r_proto="REENTRANT_PROTO_$endprotoent_r_proto" ;;
+ *) endservent_r_proto="REENTRANT_PROTO_$endservent_r_proto" ;;
esac
echo "Prototype: $try" ;;
esac
;;
*) case "$usethreads" in
- define) echo "endprotoent_r has no prototype, not using it." >&4 ;;
+ define) echo "endservent_r has no prototype, not using it." >&4 ;;
esac
- d_endprotoent_r=undef
- endprotoent_r_proto=0
+ d_endservent_r=undef
+ endservent_r_proto=0
;;
esac
;;
-*) endprotoent_r_proto=0
+*) endservent_r_proto=0
;;
esac
-: see if endpwent exists
-set endpwent d_endpwent
-eval $inlibc
-
-: see if this is a pwd.h system
-set pwd.h i_pwd
-eval $inhdr
-
-case "$i_pwd" in
-$define)
- xxx=`./findhdr pwd.h`
- $cppstdin $cppflags $cppminus < $xxx >$$.h
-
- if $contains 'pw_quota' $$.h >/dev/null 2>&1; then
+: Locate the flags for 'open()'
+echo " "
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#ifdef I_FCNTL
+#include <fcntl.h>
+#endif
+#ifdef I_SYS_FILE
+#include <sys/file.h>
+#endif
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+int main() {
+ if(O_RDONLY);
+#ifdef O_TRUNC
+ exit(0);
+#else
+ exit(1);
+#endif
+}
+EOCP
+: check sys/file.h first to get FREAD on Sun
+if $test `./findhdr sys/file.h` && \
+ set try -DI_SYS_FILE && eval $compile; then
+ h_sysfile=true;
+ echo "<sys/file.h> defines the O_* constants..." >&4
+ if $run ./try; then
+ echo "and you have the 3 argument form of open()." >&4
val="$define"
else
+ echo "but not the 3 argument form of open(). Oh, well." >&4
val="$undef"
fi
- set d_pwquota
- eval $setvar
-
- if $contains 'pw_age' $$.h >/dev/null 2>&1; then
+elif $test `./findhdr fcntl.h` && \
+ set try -DI_FCNTL && eval $compile; then
+ h_fcntl=true;
+ echo "<fcntl.h> defines the O_* constants..." >&4
+ if $run ./try; then
+ echo "and you have the 3 argument form of open()." >&4
val="$define"
else
+ echo "but not the 3 argument form of open(). Oh, well." >&4
val="$undef"
fi
- set d_pwage
- eval $setvar
+else
+ val="$undef"
+ echo "I can't find the O_* constant definitions! You got problems." >&4
+fi
+set d_open3
+eval $setvar
+$rm -f try try.*
- if $contains 'pw_change' $$.h >/dev/null 2>&1; then
+: see which of string.h or strings.h is needed
+echo " "
+strings=`./findhdr string.h`
+if $test "$strings" && $test -r "$strings"; then
+ echo "Using <string.h> instead of <strings.h>." >&4
+ val="$define"
+else
+ val="$undef"
+ strings=`./findhdr strings.h`
+ if $test "$strings" && $test -r "$strings"; then
+ echo "Using <strings.h> instead of <string.h>." >&4
+ else
+ echo "No string header found -- You'll surely have problems." >&4
+ fi
+fi
+set i_string
+eval $setvar
+case "$i_string" in
+"$undef") strings=`./findhdr strings.h`;;
+*) strings=`./findhdr string.h`;;
+esac
+
+: see if this is a sys/file.h system
+val=''
+set sys/file.h val
+eval $inhdr
+
+: do we need to include sys/file.h ?
+case "$val" in
+"$define")
+ echo " "
+ if $h_sysfile; then
val="$define"
+ echo "We'll be including <sys/file.h>." >&4
else
val="$undef"
+ echo "We won't be including <sys/file.h>." >&4
fi
- set d_pwchange
- eval $setvar
+ ;;
+*)
+ h_sysfile=false
+ ;;
+esac
+set i_sysfile
+eval $setvar
- if $contains 'pw_class' $$.h >/dev/null 2>&1; then
+: see if fcntl.h is there
+val=''
+set fcntl.h val
+eval $inhdr
+
+: see if we can include fcntl.h
+case "$val" in
+"$define")
+ echo " "
+ if $h_fcntl; then
val="$define"
+ echo "We'll be including <fcntl.h>." >&4
else
val="$undef"
+ if $h_sysfile; then
+ echo "We don't need to include <fcntl.h> if we include <sys/file.h>." >&4
+ else
+ echo "We won't be including <fcntl.h>." >&4
+ fi
fi
- set d_pwclass
- eval $setvar
+ ;;
+*)
+ h_fcntl=false
+ val="$undef"
+ ;;
+esac
+set i_fcntl
+eval $setvar
- if $contains 'pw_expire' $$.h >/dev/null 2>&1; then
- val="$define"
+: check for non-blocking I/O stuff
+case "$h_sysfile" in
+true) echo "#include <sys/file.h>" > head.c;;
+*)
+ case "$h_fcntl" in
+ true) echo "#include <fcntl.h>" > head.c;;
+ *) echo "#include <sys/fcntl.h>" > head.c;;
+ esac
+ ;;
+esac
+echo " "
+echo "Figuring out the flag used by open() for non-blocking I/O..." >&4
+case "$o_nonblock" in
+'')
+ $cat head.c > try.c
+ $cat >>try.c <<EOCP
+#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+#$i_fcntl I_FCNTL
+#ifdef I_FCNTL
+#include <fcntl.h>
+#endif
+int main() {
+#ifdef O_NONBLOCK
+ printf("O_NONBLOCK\n");
+ exit(0);
+#endif
+#ifdef O_NDELAY
+ printf("O_NDELAY\n");
+ exit(0);
+#endif
+#ifdef FNDELAY
+ printf("FNDELAY\n");
+ exit(0);
+#endif
+ exit(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ o_nonblock=`$run ./try`
+ case "$o_nonblock" in
+ '') echo "I can't figure it out, assuming O_NONBLOCK will do.";;
+ *) echo "Seems like we can use $o_nonblock.";;
+ esac
else
- val="$undef"
+ echo "(I can't compile the test program; pray O_NONBLOCK is right!)"
fi
- set d_pwexpire
- eval $setvar
+ ;;
+*) echo "Using $hint value $o_nonblock.";;
+esac
+$rm -f try try.* .out core
- if $contains 'pw_comment' $$.h >/dev/null 2>&1; then
- val="$define"
- else
- val="$undef"
- fi
- set d_pwcomment
- eval $setvar
+echo " "
+echo "Let's see what value errno gets from read() on a $o_nonblock file..." >&4
+case "$eagain" in
+'')
+ $cat head.c > try.c
+ $cat >>try.c <<EOCP
+#include <errno.h>
+#include <sys/types.h>
+#include <signal.h>
+#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+#$i_fcntl I_FCNTL
+#ifdef I_FCNTL
+#include <fcntl.h>
+#endif
+#define MY_O_NONBLOCK $o_nonblock
+#ifndef errno /* XXX need better Configure test */
+extern int errno;
+#endif
+#$i_unistd I_UNISTD
+#ifdef I_UNISTD
+#include <unistd.h>
+#endif
+#$i_string I_STRING
+#ifdef I_STRING
+#include <string.h>
+#else
+#include <strings.h>
+#endif
+$signal_t blech(x) int x; { exit(3); }
+EOCP
+ $cat >> try.c <<'EOCP'
+int main()
+{
+ int pd[2];
+ int pu[2];
+ char buf[1];
+ char string[100];
- if $contains 'pw_gecos' $$.h >/dev/null 2>&1; then
- val="$define"
- else
- val="$undef"
- fi
- set d_pwgecos
- eval $setvar
+ pipe(pd); /* Down: child -> parent */
+ pipe(pu); /* Up: parent -> child */
+ if (0 != fork()) {
+ int ret;
+ close(pd[1]); /* Parent reads from pd[0] */
+ close(pu[0]); /* Parent writes (blocking) to pu[1] */
+#ifdef F_SETFL
+ if (-1 == fcntl(pd[0], F_SETFL, MY_O_NONBLOCK))
+ exit(1);
+#else
+ exit(4);
+#endif
+ signal(SIGALRM, blech);
+ alarm(5);
+ if ((ret = read(pd[0], buf, 1)) > 0) /* Nothing to read! */
+ exit(2);
+ sprintf(string, "%d\n", ret);
+ write(2, string, strlen(string));
+ alarm(0);
+#ifdef EAGAIN
+ if (errno == EAGAIN) {
+ printf("EAGAIN\n");
+ goto ok;
+ }
+#endif
+#ifdef EWOULDBLOCK
+ if (errno == EWOULDBLOCK)
+ printf("EWOULDBLOCK\n");
+#endif
+ ok:
+ write(pu[1], buf, 1); /* Unblocks child, tell it to close our pipe */
+ sleep(2); /* Give it time to close our pipe */
+ alarm(5);
+ ret = read(pd[0], buf, 1); /* Should read EOF */
+ alarm(0);
+ sprintf(string, "%d\n", ret);
+ write(4, string, strlen(string));
+ exit(0);
+ }
- if $contains 'pw_passwd' $$.h >/dev/null 2>&1; then
+ close(pd[0]); /* We write to pd[1] */
+ close(pu[1]); /* We read from pu[0] */
+ read(pu[0], buf, 1); /* Wait for parent to signal us we may continue */
+ close(pd[1]); /* Pipe pd is now fully closed! */
+ exit(0); /* Bye bye, thank you for playing! */
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ echo "$startsh" >mtry
+ echo "$run ./try >try.out 2>try.ret 4>try.err || exit 4" >>mtry
+ chmod +x mtry
+ ./mtry >/dev/null 2>&1
+ case $? in
+ 0) eagain=`$cat try.out`;;
+ 1) echo "Could not perform non-blocking setting!";;
+ 2) echo "I did a successful read() for something that was not there!";;
+ 3) echo "Hmm... non-blocking I/O does not seem to be working!";;
+ 4) echo "Could not find F_SETFL!";;
+ *) echo "Something terribly wrong happened during testing.";;
+ esac
+ rd_nodata=`$cat try.ret`
+ echo "A read() system call with no data present returns $rd_nodata."
+ case "$rd_nodata" in
+ 0|-1) ;;
+ *)
+ echo "(That's peculiar, fixing that to be -1.)"
+ rd_nodata=-1
+ ;;
+ esac
+ case "$eagain" in
+ '')
+ echo "Forcing errno EAGAIN on read() with no data available."
+ eagain=EAGAIN
+ ;;
+ *)
+ echo "Your read() sets errno to $eagain when no data is available."
+ ;;
+ esac
+ status=`$cat try.err`
+ case "$status" in
+ 0) echo "And it correctly returns 0 to signal EOF.";;
+ -1) echo "But it also returns -1 to signal EOF, so be careful!";;
+ *) echo "However, your read() returns '$status' on EOF??";;
+ esac
val="$define"
+ if test "$status" = "$rd_nodata"; then
+ echo "WARNING: you can't distinguish between EOF and no data!"
+ val="$undef"
+ fi
else
- val="$undef"
+ echo "I can't compile the test program--assuming errno EAGAIN will do."
+ eagain=EAGAIN
fi
- set d_pwpasswd
+ set d_eofnblk
eval $setvar
-
- $rm -f $$.h
;;
*)
- val="$undef";
- set d_pwquota; eval $setvar
- set d_pwage; eval $setvar
- set d_pwchange; eval $setvar
- set d_pwclass; eval $setvar
- set d_pwexpire; eval $setvar
- set d_pwcomment; eval $setvar
- set d_pwgecos; eval $setvar
- set d_pwpasswd; eval $setvar
+ echo "Using $hint value $eagain."
+ echo "Your read() returns $rd_nodata when no data is present."
+ case "$d_eofnblk" in
+ "$define") echo "And you can see EOF because read() returns 0.";;
+ "$undef") echo "But you can't see EOF status from read() returned value.";;
+ *)
+ echo "(Assuming you can't see EOF status from read anyway.)"
+ d_eofnblk=$undef
+ ;;
+ esac
;;
esac
+$rm -f try try.* .out core head.c mtry
-: see if endpwent_r exists
-set endpwent_r d_endpwent_r
-eval $inlibc
-case "$d_endpwent_r" in
-"$define")
- hdrs="$i_systypes sys/types.h define stdio.h $i_pwd pwd.h"
- case "$d_endpwent_r_proto:$usethreads" in
- ":define") d_endpwent_r_proto=define
- set d_endpwent_r_proto endpwent_r $hdrs
- eval $hasproto ;;
- *) ;;
+: see if _ptr and _cnt from stdio act std
+echo " "
+
+if $contains '_lbfsize' `./findhdr stdio.h` >/dev/null 2>&1 ; then
+ echo "(Looks like you have stdio.h from BSD.)"
+ case "$stdio_ptr" in
+ '') stdio_ptr='((fp)->_p)'
+ ptr_lval=$define
+ ;;
+ *) ptr_lval=$d_stdio_ptr_lval;;
esac
- case "$d_endpwent_r_proto" in
- define)
- case "$endpwent_r_proto" in
- ''|0) try='int endpwent_r(FILE**);'
- ./protochk "extern $try" $hdrs && endpwent_r_proto=I_H ;;
+ case "$stdio_cnt" in
+ '') stdio_cnt='((fp)->_r)'
+ cnt_lval=$define
+ ;;
+ *) cnt_lval=$d_stdio_cnt_lval;;
esac
- case "$endpwent_r_proto" in
- ''|0) try='void endpwent_r(FILE**);'
- ./protochk "extern $try" $hdrs && endpwent_r_proto=V_H ;;
+ case "$stdio_base" in
+ '') stdio_base='((fp)->_ub._base ? (fp)->_ub._base : (fp)->_bf._base)';;
esac
- case "$endpwent_r_proto" in
- ''|0) d_endpwent_r=undef
- endpwent_r_proto=0
- echo "Disabling endpwent_r, cannot determine prototype." >&4 ;;
- * ) case "$endpwent_r_proto" in
- REENTRANT_PROTO*) ;;
- *) endpwent_r_proto="REENTRANT_PROTO_$endpwent_r_proto" ;;
- esac
- echo "Prototype: $try" ;;
+ case "$stdio_bufsiz" in
+ '') stdio_bufsiz='((fp)->_ub._base ? (fp)->_ub._size : (fp)->_bf._size)';;
esac
- ;;
- *) case "$usethreads" in
- define) echo "endpwent_r has no prototype, not using it." >&4 ;;
- esac
- d_endpwent_r=undef
- endpwent_r_proto=0
+elif $contains '_IO_fpos_t' `./findhdr stdio.h` `./findhdr libio.h` >/dev/null 2>&1 ; then
+ echo "(Looks like you have stdio.h from Linux.)"
+ case "$stdio_ptr" in
+ '') stdio_ptr='((fp)->_IO_read_ptr)'
+ ptr_lval=$define
;;
+ *) ptr_lval=$d_stdio_ptr_lval;;
esac
- ;;
-*) endpwent_r_proto=0
- ;;
-esac
-
-: see if endservent exists
-set endservent d_endsent
-eval $inlibc
-
-: see if endservent_r exists
-set endservent_r d_endservent_r
-eval $inlibc
-case "$d_endservent_r" in
-"$define")
- hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
- case "$d_endservent_r_proto:$usethreads" in
- ":define") d_endservent_r_proto=define
- set d_endservent_r_proto endservent_r $hdrs
- eval $hasproto ;;
- *) ;;
+ case "$stdio_cnt" in
+ '') stdio_cnt='((fp)->_IO_read_end - (fp)->_IO_read_ptr)'
+ cnt_lval=$undef
+ ;;
+ *) cnt_lval=$d_stdio_cnt_lval;;
esac
- case "$d_endservent_r_proto" in
- define)
- case "$endservent_r_proto" in
- ''|0) try='int endservent_r(struct servent_data*);'
- ./protochk "extern $try" $hdrs && endservent_r_proto=I_D ;;
+ case "$stdio_base" in
+ '') stdio_base='((fp)->_IO_read_base)';;
esac
- case "$endservent_r_proto" in
- ''|0) try='void endservent_r(struct servent_data*);'
- ./protochk "extern $try" $hdrs && endservent_r_proto=V_D ;;
+ case "$stdio_bufsiz" in
+ '') stdio_bufsiz='((fp)->_IO_read_end - (fp)->_IO_read_base)';;
esac
- case "$endservent_r_proto" in
- ''|0) d_endservent_r=undef
- endservent_r_proto=0
- echo "Disabling endservent_r, cannot determine prototype." >&4 ;;
- * ) case "$endservent_r_proto" in
- REENTRANT_PROTO*) ;;
- *) endservent_r_proto="REENTRANT_PROTO_$endservent_r_proto" ;;
- esac
- echo "Prototype: $try" ;;
+else
+ case "$stdio_ptr" in
+ '') stdio_ptr='((fp)->_ptr)'
+ ptr_lval=$define
+ ;;
+ *) ptr_lval=$d_stdio_ptr_lval;;
esac
- ;;
- *) case "$usethreads" in
- define) echo "endservent_r has no prototype, not using it." >&4 ;;
- esac
- d_endservent_r=undef
- endservent_r_proto=0
+ case "$stdio_cnt" in
+ '') stdio_cnt='((fp)->_cnt)'
+ cnt_lval=$define
;;
+ *) cnt_lval=$d_stdio_cnt_lval;;
esac
- ;;
-*) endservent_r_proto=0
- ;;
-esac
+ case "$stdio_base" in
+ '') stdio_base='((fp)->_base)';;
+ esac
+ case "$stdio_bufsiz" in
+ '') stdio_bufsiz='((fp)->_cnt + (fp)->_ptr - (fp)->_base)';;
+ esac
+fi
-: Locate the flags for 'open()'
-echo " "
-$cat >try.c <<'EOCP'
-#include <sys/types.h>
-#ifdef I_FCNTL
-#include <fcntl.h>
-#endif
-#ifdef I_SYS_FILE
-#include <sys/file.h>
+: test whether _ptr and _cnt really work
+echo "Checking how std your stdio is..." >&4
+$cat >try.c <<EOP
+#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
#endif
+#define FILE_ptr(fp) $stdio_ptr
+#define FILE_cnt(fp) $stdio_cnt
int main() {
- if(O_RDONLY);
-#ifdef O_TRUNC
- exit(0);
-#else
+ FILE *fp = fopen("try.c", "r");
+ char c = getc(fp);
+ if (
+ 18 <= FILE_cnt(fp) &&
+ strncmp(FILE_ptr(fp), "include <stdio.h>\n", 18) == 0
+ )
+ exit(0);
exit(1);
-#endif
}
-EOCP
-: check sys/file.h first to get FREAD on Sun
-if $test `./findhdr sys/file.h` && \
- set try -DI_SYS_FILE && eval $compile; then
- h_sysfile=true;
- echo "<sys/file.h> defines the O_* constants..." >&4
- if $run ./try; then
- echo "and you have the 3 argument form of open()." >&4
- val="$define"
- else
- echo "but not the 3 argument form of open(). Oh, well." >&4
- val="$undef"
- fi
-elif $test `./findhdr fcntl.h` && \
- set try -DI_FCNTL && eval $compile; then
- h_fcntl=true;
- echo "<fcntl.h> defines the O_* constants..." >&4
+EOP
+val="$undef"
+set try
+if eval $compile && $to try.c; then
if $run ./try; then
- echo "and you have the 3 argument form of open()." >&4
+ echo "Your stdio acts pretty std."
val="$define"
else
- echo "but not the 3 argument form of open(). Oh, well." >&4
- val="$undef"
+ echo "Your stdio isn't very std."
fi
else
- val="$undef"
- echo "I can't find the O_* constant definitions! You got problems." >&4
-fi
-set d_open3
-eval $setvar
-$rm -f try try.*
-
-: see which of string.h or strings.h is needed
-echo " "
-strings=`./findhdr string.h`
-if $test "$strings" && $test -r "$strings"; then
- echo "Using <string.h> instead of <strings.h>." >&4
- val="$define"
-else
- val="$undef"
- strings=`./findhdr strings.h`
- if $test "$strings" && $test -r "$strings"; then
- echo "Using <strings.h> instead of <string.h>." >&4
- else
- echo "No string header found -- You'll surely have problems." >&4
- fi
+ echo "Your stdio doesn't appear very std."
fi
-set i_string
-eval $setvar
-case "$i_string" in
-"$undef") strings=`./findhdr strings.h`;;
-*) strings=`./findhdr string.h`;;
-esac
-
-: see if this is a sys/file.h system
-val=''
-set sys/file.h val
-eval $inhdr
+$rm -f try.c try
-: do we need to include sys/file.h ?
-case "$val" in
-"$define")
- echo " "
- if $h_sysfile; then
- val="$define"
- echo "We'll be including <sys/file.h>." >&4
- else
+# glibc 2.2.90 and above apparently change stdio streams so Perl's
+# direct buffer manipulation no longer works. The Configure tests
+# should be changed to correctly detect this, but until then,
+# the following check should at least let perl compile and run.
+# (This quick fix should be updated before 5.8.1.)
+# To be defensive, reject all unknown versions, and all versions > 2.2.9.
+# A. Dougherty, June 3, 2002.
+case "$d_gnulibc" in
+$define)
+ case "$gnulibc_version" in
+ 2.[01]*) ;;
+ 2.2) ;;
+ 2.2.[0-9]) ;;
+ *) echo "But I will not snoop inside glibc $gnulibc_version stdio buffers."
val="$undef"
- echo "We won't be including <sys/file.h>." >&4
- fi
- ;;
-*)
- h_sysfile=false
+ ;;
+ esac
;;
esac
-set i_sysfile
+set d_stdstdio
eval $setvar
-: see if fcntl.h is there
-val=''
-set fcntl.h val
-eval $inhdr
-
-: see if we can include fcntl.h
-case "$val" in
-"$define")
- echo " "
- if $h_fcntl; then
- val="$define"
- echo "We'll be including <fcntl.h>." >&4
- else
- val="$undef"
- if $h_sysfile; then
- echo "We don't need to include <fcntl.h> if we include <sys/file.h>." >&4
- else
- echo "We won't be including <fcntl.h>." >&4
- fi
- fi
- ;;
-*)
- h_fcntl=false
- val="$undef"
- ;;
+: Can _ptr be used as an lvalue?
+case "$d_stdstdio$ptr_lval" in
+$define$define) val=$define ;;
+*) val=$undef ;;
esac
-set i_fcntl
+set d_stdio_ptr_lval
eval $setvar
-: check for non-blocking I/O stuff
-case "$h_sysfile" in
-true) echo "#include <sys/file.h>" > head.c;;
-*)
- case "$h_fcntl" in
- true) echo "#include <fcntl.h>" > head.c;;
- *) echo "#include <sys/fcntl.h>" > head.c;;
- esac
- ;;
-esac
-echo " "
-echo "Figuring out the flag used by open() for non-blocking I/O..." >&4
-case "$o_nonblock" in
-'')
- $cat head.c > try.c
- $cat >>try.c <<EOCP
+: Can _cnt be used as an lvalue?
+case "$d_stdstdio$cnt_lval" in
+$define$define) val=$define ;;
+*) val=$undef ;;
+esac
+set d_stdio_cnt_lval
+eval $setvar
+
+
+: test whether setting _ptr sets _cnt as a side effect
+d_stdio_ptr_lval_sets_cnt="$undef"
+d_stdio_ptr_lval_nochange_cnt="$undef"
+case "$d_stdio_ptr_lval$d_stdstdio" in
+$define$define)
+ echo "Checking to see what happens if we set the stdio ptr..." >&4
+$cat >try.c <<EOP
#include <stdio.h>
+/* Can we scream? */
+/* Eat dust sed :-) */
+/* In the buffer space, no one can hear you scream. */
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
#include <stdlib.h>
-#$i_fcntl I_FCNTL
-#ifdef I_FCNTL
-#include <fcntl.h>
#endif
+#define FILE_ptr(fp) $stdio_ptr
+#define FILE_cnt(fp) $stdio_cnt
+#include <sys/types.h>
int main() {
-#ifdef O_NONBLOCK
- printf("O_NONBLOCK\n");
- exit(0);
-#endif
-#ifdef O_NDELAY
- printf("O_NDELAY\n");
- exit(0);
-#endif
-#ifdef FNDELAY
- printf("FNDELAY\n");
- exit(0);
-#endif
- exit(0);
+ FILE *fp = fopen("try.c", "r");
+ int c;
+ char *ptr;
+ size_t cnt;
+ if (!fp) {
+ puts("Fail even to read");
+ exit(1);
+ }
+ c = getc(fp); /* Read away the first # */
+ if (c == EOF) {
+ puts("Fail even to read");
+ exit(1);
+ }
+ if (!(
+ 18 <= FILE_cnt(fp) &&
+ strncmp(FILE_ptr(fp), "include <stdio.h>\n", 18) == 0
+ )) {
+ puts("Fail even to read");
+ exit (1);
+ }
+ ptr = (char*) FILE_ptr(fp);
+ cnt = (size_t)FILE_cnt(fp);
+
+ FILE_ptr(fp) += 42;
+
+ if ((char*)FILE_ptr(fp) != (ptr + 42)) {
+ printf("Fail ptr check %p != %p", FILE_ptr(fp), (ptr + 42));
+ exit (1);
+ }
+ if (FILE_cnt(fp) <= 20) {
+ printf ("Fail (<20 chars to test)");
+ exit (1);
+ }
+ if (strncmp(FILE_ptr(fp), "Eat dust sed :-) */\n", 20) != 0) {
+ puts("Fail compare");
+ exit (1);
+ }
+ if (cnt == FILE_cnt(fp)) {
+ puts("Pass_unchanged");
+ exit (0);
+ }
+ if (FILE_cnt(fp) == (cnt - 42)) {
+ puts("Pass_changed");
+ exit (0);
+ }
+ printf("Fail count was %d now %d\n", cnt, FILE_cnt(fp));
+ return 1;
+
}
-EOCP
+EOP
set try
- if eval $compile_ok; then
- o_nonblock=`$run ./try`
- case "$o_nonblock" in
- '') echo "I can't figure it out, assuming O_NONBLOCK will do.";;
- *) echo "Seems like we can use $o_nonblock.";;
- esac
+ if eval $compile && $to try.c; then
+ case `$run ./try` in
+ Pass_changed)
+ echo "Increasing ptr in your stdio decreases cnt by the same amount. Good." >&4
+ d_stdio_ptr_lval_sets_cnt="$define" ;;
+ Pass_unchanged)
+ echo "Increasing ptr in your stdio leaves cnt unchanged. Good." >&4
+ d_stdio_ptr_lval_nochange_cnt="$define" ;;
+ Fail*)
+ echo "Increasing ptr in your stdio didn't do exactly what I expected. We'll not be doing that then." >&4 ;;
+ *)
+ echo "It appears attempting to set ptr in your stdio is a bad plan." >&4 ;;
+ esac
else
- echo "(I can't compile the test program; pray O_NONBLOCK is right!)"
+ echo "It seems we can't set ptr in your stdio. Nevermind." >&4
fi
+ $rm -f try.c try
;;
-*) echo "Using $hint value $o_nonblock.";;
esac
-$rm -f try try.* .out core
-
-echo " "
-echo "Let's see what value errno gets from read() on a $o_nonblock file..." >&4
-case "$eagain" in
-'')
- $cat head.c > try.c
- $cat >>try.c <<EOCP
-#include <errno.h>
-#include <sys/types.h>
-#include <signal.h>
-#include <stdio.h>
-#include <stdlib.h>
-#$i_fcntl I_FCNTL
-#ifdef I_FCNTL
-#include <fcntl.h>
-#endif
-#define MY_O_NONBLOCK $o_nonblock
-#ifndef errno /* XXX need better Configure test */
-extern int errno;
-#endif
-#$i_unistd I_UNISTD
-#ifdef I_UNISTD
-#include <unistd.h>
-#endif
-#$i_string I_STRING
-#ifdef I_STRING
-#include <string.h>
-#else
-#include <strings.h>
-#endif
-$signal_t blech(x) int x; { exit(3); }
-EOCP
- $cat >> try.c <<'EOCP'
-int main()
-{
- int pd[2];
- int pu[2];
- char buf[1];
- char string[100];
- pipe(pd); /* Down: child -> parent */
- pipe(pu); /* Up: parent -> child */
- if (0 != fork()) {
- int ret;
- close(pd[1]); /* Parent reads from pd[0] */
- close(pu[0]); /* Parent writes (blocking) to pu[1] */
-#ifdef F_SETFL
- if (-1 == fcntl(pd[0], F_SETFL, MY_O_NONBLOCK))
- exit(1);
-#else
- exit(4);
-#endif
- signal(SIGALRM, blech);
- alarm(5);
- if ((ret = read(pd[0], buf, 1)) > 0) /* Nothing to read! */
- exit(2);
- sprintf(string, "%d\n", ret);
- write(2, string, strlen(string));
- alarm(0);
-#ifdef EAGAIN
- if (errno == EAGAIN) {
- printf("EAGAIN\n");
- goto ok;
- }
-#endif
-#ifdef EWOULDBLOCK
- if (errno == EWOULDBLOCK)
- printf("EWOULDBLOCK\n");
+: see if _base is also standard
+val="$undef"
+case "$d_stdstdio" in
+$define)
+ $cat >try.c <<EOP
+#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
#endif
- ok:
- write(pu[1], buf, 1); /* Unblocks child, tell it to close our pipe */
- sleep(2); /* Give it time to close our pipe */
- alarm(5);
- ret = read(pd[0], buf, 1); /* Should read EOF */
- alarm(0);
- sprintf(string, "%d\n", ret);
- write(4, string, strlen(string));
+#define FILE_base(fp) $stdio_base
+#define FILE_bufsiz(fp) $stdio_bufsiz
+int main() {
+ FILE *fp = fopen("try.c", "r");
+ char c = getc(fp);
+ if (
+ 19 <= FILE_bufsiz(fp) &&
+ strncmp(FILE_base(fp), "#include <stdio.h>\n", 19) == 0
+ )
exit(0);
- }
-
- close(pd[0]); /* We write to pd[1] */
- close(pu[1]); /* We read from pu[0] */
- read(pu[0], buf, 1); /* Wait for parent to signal us we may continue */
- close(pd[1]); /* Pipe pd is now fully closed! */
- exit(0); /* Bye bye, thank you for playing! */
+ exit(1);
}
-EOCP
- set try
- if eval $compile_ok; then
- echo "$startsh" >mtry
- echo "$run ./try >try.out 2>try.ret 4>try.err || exit 4" >>mtry
- chmod +x mtry
- ./mtry >/dev/null 2>&1
- case $? in
- 0) eagain=`$cat try.out`;;
- 1) echo "Could not perform non-blocking setting!";;
- 2) echo "I did a successful read() for something that was not there!";;
- 3) echo "Hmm... non-blocking I/O does not seem to be working!";;
- 4) echo "Could not find F_SETFL!";;
- *) echo "Something terribly wrong happened during testing.";;
- esac
- rd_nodata=`$cat try.ret`
- echo "A read() system call with no data present returns $rd_nodata."
- case "$rd_nodata" in
- 0|-1) ;;
- *)
- echo "(That's peculiar, fixing that to be -1.)"
- rd_nodata=-1
- ;;
- esac
- case "$eagain" in
- '')
- echo "Forcing errno EAGAIN on read() with no data available."
- eagain=EAGAIN
- ;;
- *)
- echo "Your read() sets errno to $eagain when no data is available."
- ;;
- esac
- status=`$cat try.err`
- case "$status" in
- 0) echo "And it correctly returns 0 to signal EOF.";;
- -1) echo "But it also returns -1 to signal EOF, so be careful!";;
- *) echo "However, your read() returns '$status' on EOF??";;
- esac
- val="$define"
- if test "$status" = "$rd_nodata"; then
- echo "WARNING: you can't distinguish between EOF and no data!"
- val="$undef"
+EOP
+ set try
+ if eval $compile && $to try.c; then
+ if $run ./try; then
+ echo "And its _base field acts std."
+ val="$define"
+ else
+ echo "But its _base field isn't std."
fi
else
- echo "I can't compile the test program--assuming errno EAGAIN will do."
- eagain=EAGAIN
+ echo "However, it seems to be lacking the _base field."
fi
- set d_eofnblk
- eval $setvar
+ $rm -f try.c try
;;
-*)
- echo "Using $hint value $eagain."
- echo "Your read() returns $rd_nodata when no data is present."
- case "$d_eofnblk" in
- "$define") echo "And you can see EOF because read() returns 0.";;
- "$undef") echo "But you can't see EOF status from read() returned value.";;
- *)
- echo "(Assuming you can't see EOF status from read anyway.)"
- d_eofnblk=$undef
+esac
+set d_stdiobase
+eval $setvar
+
+: see if fast_stdio exists
+val="$undef"
+case "$d_stdstdio:$d_stdio_ptr_lval" in
+"$define:$define")
+ case "$d_stdio_cnt_lval$d_stdio_ptr_lval_sets_cnt" in
+ *$define*)
+ echo "You seem to have 'fast stdio' to directly manipulate the stdio buffers." >& 4
+ val="$define"
;;
esac
;;
esac
-$rm -f try try.* .out core head.c mtry
+set d_faststdio
+eval $setvar
+
+
: see if fchdir exists
set fchdir d_fchdir
echo " "
: See if fcntl-based locking works.
$cat >try.c <<EOCP
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
#include <stdlib.h>
+#endif
#include <unistd.h>
#include <fcntl.h>
#include <signal.h>
Checking to see how well your C compiler handles fd_set and friends ...
EOM
$cat >try.c <<EOCP
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
#$i_systime I_SYS_TIME
#$i_sysselct I_SYS_SELECT
#$d_socket HAS_SOCKET
./protochk "extern $try" $hdrs && gethostbyaddr_r_proto=I_CII ;;
esac
case "$gethostbyaddr_r_proto" in
+ ''|0) try='int gethostbyaddr_r(const void*, socklen_t, int, struct hostent*, char*, size_t, struct hostent**, int*);'
+ ./protochk "extern $try" $hdrs && gethostbyaddr_r_proto=I_TsISBWRE ;;
+ esac
+ case "$gethostbyaddr_r_proto" in
''|0) d_gethostbyaddr_r=undef
gethostbyaddr_r_proto=0
echo "Disabling gethostbyaddr_r, cannot determine prototype." >&4 ;;
./protochk "extern $try" $hdrs && getnetbyaddr_r_proto=I_IISD ;;
esac
case "$getnetbyaddr_r_proto" in
+ ''|0) try='int getnetbyaddr_r(uint32_t, int, struct netent*, char*, size_t, struct netent**, int*);'
+ ./protochk "extern $try" $hdrs && getnetbyaddr_r_proto=I_uISBWRE ;;
+ esac
+ case "$getnetbyaddr_r_proto" in
''|0) d_getnetbyaddr_r=undef
getnetbyaddr_r_proto=0
echo "Disabling getnetbyaddr_r, cannot determine prototype." >&4 ;;
set d_htonl
eval $setvar
+: see if ilogbl exists
+set ilogbl d_ilogbl
+eval $inlibc
+
: index or strchr
echo " "
if set index val -f; eval $csym; $val; then
: Look for isascii
echo " "
-$cat >isascii.c <<'EOCP'
+$cat >isascii.c <<EOCP
#include <stdio.h>
#include <ctype.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
int main() {
int c = 'A';
if (isascii(c))
set d_ldbl_dig
eval $setvar
+: see if this is a math.h system
+set math.h i_math
+eval $inhdr
+
+d_libm_lib_version="$undef"
+case $i_math in
+ $define)
+ : check to see if math.h defines _LIB_VERSION
+ echo " "
+ echo "Checking to see if your libm supports _LIB_VERSION..." >&4
+ $cat >try.c <<EOCP
+#include <unistd.h>
+#include <math.h>
+int main (int argc, char *argv[])
+{
+ printf ("%d\n", _LIB_VERSION);
+ return (0);
+ } /* main */
+EOCP
+ set try
+ if eval $compile; then
+ foo=`$run ./try`
+ echo "Yes, it does ($foo)" >&4
+ d_libm_lib_version="$define"
+ else
+ echo "No, it does not (probably harmless)\n" >&4
+ fi
+ $rm -f try.* try core core.try.*
+ ;;
+
+ esac
+
: see if link exists
set link d_link
eval $inlibc
set madvise d_madvise
eval $inlibc
+: see if malloc_size exists
+set malloc_size d_malloc_size
+eval $inlibc
+
+: see if malloc_size_good exists
+set malloc_good_size d_malloc_good_size
+eval $inlibc
+
: see if mblen exists
set mblen d_mblen
eval $inlibc
+: see if sqrtl exists
+set sqrtl d_sqrtl
+eval $inlibc
+
+: see if scalbnl exists
+set scalbnl d_scalbnl
+eval $inlibc
+
+: see if modfl exists
+set modfl d_modfl
+eval $inlibc
+
+: see if prototype for modfl is available
+echo " "
+set d_modflproto modfl $i_math math.h
+eval $hasproto
+
+d_modfl_pow32_bug="$undef"
+
+case "$d_longdbl$d_modfl" in
+$define$define)
+ $cat <<EOM
+Checking to see whether your modfl() is okay for large values...
+EOM
+$cat >try.c <<EOCP
+#include <math.h>
+#include <stdio.h>
+EOCP
+if $test "X$d_modflproto" != "X$define"; then
+ $cat >>try.c <<EOCP
+/* Sigh. many current glibcs provide the function, but do not prototype it. */
+long double modfl (long double, long double *);
+EOCP
+fi
+$cat >>try.c <<EOCP
+int main() {
+ long double nv = 4294967303.15;
+ long double v, w;
+ v = modfl(nv, &w);
+#ifdef __GLIBC__
+ printf("glibc");
+#endif
+ printf(" %"$sPRIfldbl" %"$sPRIfldbl" %"$sPRIfldbl"\n", nv, v, w);
+ return 0;
+}
+EOCP
+ case "$osname:$gccversion" in
+ aix:) saveccflags="$ccflags"
+ ccflags="$ccflags -qlongdouble" ;; # to avoid core dump
+ esac
+ set try
+ if eval $compile; then
+ foo=`$run ./try`
+ case "$foo" in
+ *" 4294967303.150000 1.150000 4294967302.000000")
+ echo >&4 "Your modfl() is broken for large values."
+ d_modfl_pow32_bug="$define"
+ case "$foo" in
+ glibc) echo >&4 "You should upgrade your glibc to at least 2.2.2 to get a fixed modfl()."
+ ;;
+ esac
+ ;;
+ *" 4294967303.150000 0.150000 4294967303.000000")
+ echo >&4 "Your modfl() seems okay for large values."
+ ;;
+ *) echo >&4 "I don't understand your modfl() at all."
+ d_modfl="$undef"
+ ;;
+ esac
+ $rm -f try.* try core core.try.*
+ else
+ echo "I cannot figure out whether your modfl() is okay, assuming it isn't."
+ d_modfl="$undef"
+ fi
+ case "$osname:$gccversion" in
+ aix:) ccflags="$saveccflags" ;; # restore
+ esac
+ ;;
+esac
+
+if $test "$uselongdouble" = "$define"; then
+ message=""
+ if $test "$d_sqrtl" != "$define"; then
+ message="$message sqrtl"
+ fi
+ if $test "$d_modfl" != "$define"; then
+ if $test "$d_aintl:$d_copysignl" = "$define:$define"; then
+ echo "You have both aintl and copysignl, so I can emulate modfl."
+ else
+ message="$message modfl"
+ fi
+ fi
+ if $test "$d_frexpl" != "$define"; then
+ if $test "$d_ilogbl:$d_scalbnl" = "$define:$define"; then
+ echo "You have both ilogbl and scalbnl, so I can emulate frexpl."
+ else
+ message="$message frexpl"
+ fi
+ fi
+
+ if $test "$message" != ""; then
+ $cat <<EOM >&4
+
+*** You requested the use of long doubles but you do not seem to have
+*** the following mathematical functions needed for long double support:
+*** $message
+*** Please rerun Configure without -Duselongdouble and/or -Dusemorebits.
+*** Cannot continue, aborting.
+
+EOM
+
+ exit 1
+ fi
+fi
+
: see if mprotect exists
set mprotect d_mprotect
eval $inlibc
set munmap d_munmap
eval $inlibc
-: see if nanosleep exists
-set nanosleep d_nanosleep
-eval $inlibc
-
: see if nice exists
set nice d_nice
eval $inlibc
case "$charsize" in
'')
echo "Checking to see how big your characters are (hey, you never know)..." >&4
- $cat >try.c <<'EOCP'
+ $cat >try.c <<EOCP
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
int main()
{
printf("%d\n", (int)sizeof(char));
echo " "
echo 'Checking to see if your C compiler knows about "volatile"...' >&4
$cat >try.c <<'EOCP'
-main()
+int main()
{
typedef struct _goo_struct goo_struct;
goo_struct * volatile goo = ((goo_struct *)0);
fi
$cat <<EOP >try.c
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
#include <sys/types.h>
#include <signal.h>
#ifdef SIGFPE
signal(SIGFPE, blech);
#endif
- for (i = 0; i < n; i++) {
- u = u << 1 | ($uvtype)1;
- d = ($nvtype)u;
- if (($uvtype)d != u)
- break;
- if (d <= 0)
- break;
- d = ($nvtype)(u - 1);
- if (($uvtype)d != (u - 1))
- break;
+ for (i = 0; i < n; i++) {
+ u = u << 1 | ($uvtype)1;
+ d = ($nvtype)u;
+ if (($uvtype)d != u)
+ break;
+ if (d <= 0)
+ break;
+ d = ($nvtype)(u - 1);
+ if (($uvtype)d != (u - 1))
+ break;
+#ifdef SIGFPE
+ if (bletched) {
+ break;
+#endif
+ }
+ }
+ printf("%d\n", ((i == n) ? -n : i));
+ exit(0);
+}
+EOP
+set try
+
+d_nv_preserves_uv="$undef"
+if eval $compile; then
+ nv_preserves_uv_bits="`$run ./try`"
+fi
+case "$nv_preserves_uv_bits" in
+\-[1-9]*)
+ nv_preserves_uv_bits=`expr 0 - $nv_preserves_uv_bits`
+ $echo "Your NVs can preserve all $nv_preserves_uv_bits bits of your UVs." 2>&1
+ d_nv_preserves_uv="$define"
+ ;;
+[1-9]*) $echo "Your NVs can preserve only $nv_preserves_uv_bits bits of your UVs." 2>&1
+ d_nv_preserves_uv="$undef" ;;
+*) $echo "Can't figure out how many bits your NVs preserve." 2>&1
+ nv_preserves_uv_bits="$undef" ;;
+esac
+
+$rm -f try.* try
+
+$echo "Checking whether NV 0.0 is all bits zero in memory..." >&4
+: volatile so that the compiler has to store it out to memory.
+if test X"$d_volatile" = X"$define"; then
+ volatile=volatile
+fi
+$cat <<EOP >try.c
+#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+#$i_string I_STRING
+#ifdef I_STRING
+# include <string.h>
+#else
+# include <strings.h>
+#endif
+#include <sys/types.h>
+#include <signal.h>
+#ifdef SIGFPE
+$volatile int bletched = 0;
+$signal_t blech(s) int s; { bletched = 1; }
+#endif
+
+int checkit($nvtype d, char *where) {
+ unsigned char *p = (char *)&d;
+ unsigned char *end = p + sizeof(d);
+ int fail = 0;
+
+ while (p < end)
+ fail += *p++;
+
+ if (!fail)
+ return 0;
+
+ p = (char *)&d;
+ printf("No - %s: 0x", where);
+ while (p < end)
+ printf ("%02X", *p++);
+ printf("\n");
+ return 1;
+}
+
+int main(int argc, char **argv) {
+ $nvtype d = 0.0;
+ int fail = 0;
+ fail += checkit(d, "0.0");
+
+ /* The compiler shouldn't be assuming that bletched is 0 */
+ d = bletched;
+
+ fail += checkit(d, "bleched");
+
+#ifdef SIGFPE
+ signal(SIGFPE, blech);
+#endif
+
+ /* Paranoia - the compiler should have no way of knowing that ANSI says
+ that argv[argc] will always be NULL. Actually, if it did assume this it
+ would be buggy, as this is C and main() can be called from elsewhere in
+ the program. */
+ d = argv[argc] ? 1 : 0;
+
+ if (d) {
+ printf("Odd argv[argc]=%p, d=%g\n", argv[argc], d);
+ }
+
+ fail += checkit(d, "ternary");
+
+ memset(&d, sizeof(d), argv[argc] ? 1 : 0);
+
+ if (d != 0.0) {
+ printf("No - memset doesn't give 0.0\n");
+ /* This might just blow up: */
+ printf("(gives %g)\n", d);
+ return 1;
+ }
+
#ifdef SIGFPE
- if (bletched) {
- break;
+ if (bletched) {
+ printf("No - something bleched\n");
+ return 1;
+ }
#endif
- }
+ if (fail) {
+ printf("No - %d fail(s)\n", fail);
+ return 1;
}
- printf("%d\n", ((i == n) ? -n : i));
- exit(0);
+ printf("Yes\n");
+ return 0;
}
EOP
set try
-d_nv_preserves_uv="$undef"
+d_nv_zero_is_allbits_zero="$undef"
if eval $compile; then
- nv_preserves_uv_bits="`$run ./try`"
+ xxx="`$run ./try`"
+ case "$?" in
+ 0)
+ case "$xxx" in
+ Yes) cat >&4 <<EOM
+0.0 is represented as all bits zero in memory
+EOM
+ d_nv_zero_is_allbits_zero="$define"
+ ;;
+ *) cat >&4 <<EOM
+0.0 is not represented as all bits zero in memory
+EOM
+ d_nv_zero_is_allbits_zero="$undef"
+ ;;
+ esac
+ ;;
+ *) cat >&4 <<EOM
+0.0 is not represented as all bits zero in memory
+EOM
+ d_nv_zero_is_allbits_zero="$undef"
+ ;;
+ esac
fi
-case "$nv_preserves_uv_bits" in
-\-[1-9]*)
- nv_preserves_uv_bits=`expr 0 - $nv_preserves_uv_bits`
- $echo "Your NVs can preserve all $nv_preserves_uv_bits bits of your UVs." 2>&1
- d_nv_preserves_uv="$define"
- ;;
-[1-9]*) $echo "Your NVs can preserve only $nv_preserves_uv_bits bits of your UVs." 2>&1
- d_nv_preserves_uv="$undef" ;;
-*) $echo "Can't figure out how many bits your NVs preserve." 2>&1
- nv_preserves_uv_bits="$undef" ;;
-esac
$rm -f try.* try
set d_pthread_atfork
eval $setvar
+: see if pthread_attr_setscope exists
+set pthread_attr_setscope d_pthread_attr_setscope
+eval $inlibc
+
: see whether the various POSIXish _yields exist
$cat >try.c <<EOP
define)
case "$random_r_proto" in
''|0) try='int random_r(int*, struct random_data*);'
- ./protochk "extern $try" $hdrs && random_r_proto=I_TS ;;
+ ./protochk "extern $try" $hdrs && random_r_proto=I_iS ;;
+ esac
+ case "$random_r_proto" in
+ ''|0) try='int random_r(long*, struct random_data*);'
+ ./protochk "extern $try" $hdrs && random_r_proto=I_lS ;;
+ esac
+ case "$random_r_proto" in
+ ''|0) try='int random_r(struct random_data*, int32_t*);'
+ ./protochk "extern $try" $hdrs && random_r_proto=I_St ;;
esac
case "$random_r_proto" in
''|0) d_random_r=undef
echo "You do not have union semun in <sys/sem.h>." >&4
val="$undef"
fi
-$rm -f try try.c try.h
+$rm -f try try.c
set d_union_semun
eval $setvar
: see how to do semctl IPC_STAT
case "$d_sem" in
$define)
- : see whether semctl IPC_STAT can use union semun
echo " "
$cat > try.h <<END
#ifndef S_IRUSR
# define S_IRWXO (S_IROTH|S_IWOTH|S_IXOTH)
#endif
END
-
- $cat > try.c <<END
+ : see whether semctl IPC_STAT can use union semun
+ val="$undef"
+ case "$d_semctl_semun" in
+ '')
+ $cat > try.c <<END
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/sem.h>
return 0;
}
END
- val="$undef"
- set try
- if eval $compile; then
- xxx=`$run ./try`
- case "$xxx" in
- semun) val="$define" ;;
- esac
- fi
- $rm -f try try.c
+ set try
+ if eval $compile; then
+ xxx=`$run ./try`
+ case "$xxx" in
+ semun) val="$define" ;;
+ esac
+ fi
+ $rm -f try try.c
+ ;;
+ esac
set d_semctl_semun
eval $setvar
case "$d_semctl_semun" in
esac
: see whether semctl IPC_STAT can use struct semid_ds pointer
- $cat > try.c <<'END'
+ val="$undef"
+ case "$d_semctl_semid_ds" in
+ '')
+ $cat > try.c <<'END'
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/sem.h>
return 0;
}
END
- val="$undef"
- set try
- if eval $compile; then
- xxx=`$run ./try`
- case "$xxx" in
- semid_ds) val="$define" ;;
- esac
- fi
- $rm -f try try.c
+ set try
+ if eval $compile; then
+ xxx=`$run ./try`
+ case "$xxx" in
+ semid_ds) val="$define" ;;
+ esac
+ fi
+ $rm -f try try.c
+ ;;
+ esac
set d_semctl_semid_ds
eval $setvar
case "$d_semctl_semid_ds" in
: see if we have sigaction
if set sigaction val -f d_sigaction; eval $csym; $val; then
echo 'sigaction() found.' >&4
- $cat > try.c <<'EOP'
+ $cat > try.c <<EOP
#include <stdio.h>
#include <sys/types.h>
#include <signal.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
int main()
{
struct sigaction act, oact;
echo " "
case "$d_sigsetjmp" in
'')
- $cat >try.c <<'EOP'
+ $cat >try.c <<EOP
#include <setjmp.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
sigjmp_buf env;
int set = 1;
int main()
eval $hasproto
: see if prototype for setresuid is available
-echo " "
-set d_sresuproto setresuid $i_unistd unistd.h
-eval $hasproto
-
-: see if sys/stat.h is available
-set sys/stat.h i_sysstat
-eval $inhdr
-
-
-: see if stat knows about block sizes
-echo " "
-echo "Checking to see if your struct stat has st_blocks field..." >&4
-set d_statblks stat st_blocks $i_sysstat sys/stat.h
-eval $hasfield
-
-
-: see if this is a sys/vfs.h system
-set sys/vfs.h i_sysvfs
-eval $inhdr
-
-
-: see if this is a sys/statfs.h system
-set sys/statfs.h i_sysstatfs
-eval $inhdr
-
-
-echo " "
-echo "Checking to see if your system supports struct statfs..." >&4
-set d_statfs_s statfs $i_systypes sys/types.h $i_sysparam sys/param.h $i_sysmount sys/mount.h $i_sysvfs sys/vfs.h $i_sysstatfs sys/statfs.h
-eval $hasstruct
-case "$d_statfs_s" in
-"$define") echo "Yes, it does." ;;
-*) echo "No, it doesn't." ;;
-esac
-
-
-
-: see if struct statfs knows about f_flags
-case "$d_statfs_s" in
-define)
- echo " "
- echo "Checking to see if your struct statfs has f_flags field..." >&4
- set d_statfs_f_flags statfs f_flags $i_systypes sys/types.h $i_sysparam sys/param.h $i_sysmount sys/mount.h $i_sysvfs sys/vfs.h $i_sysstatfs sys/statfs.h
- eval $hasfield
- ;;
-*) val="$undef"
- set d_statfs_f_flags
- eval $setvar
- ;;
-esac
-case "$d_statfs_f_flags" in
-"$define") echo "Yes, it does." ;;
-*) echo "No, it doesn't." ;;
-esac
-
-: see if _ptr and _cnt from stdio act std
-echo " "
-
-if $contains '_lbfsize' `./findhdr stdio.h` >/dev/null 2>&1 ; then
- echo "(Looks like you have stdio.h from BSD.)"
- case "$stdio_ptr" in
- '') stdio_ptr='((fp)->_p)'
- ptr_lval=$define
- ;;
- *) ptr_lval=$d_stdio_ptr_lval;;
- esac
- case "$stdio_cnt" in
- '') stdio_cnt='((fp)->_r)'
- cnt_lval=$define
- ;;
- *) cnt_lval=$d_stdio_cnt_lval;;
- esac
- case "$stdio_base" in
- '') stdio_base='((fp)->_ub._base ? (fp)->_ub._base : (fp)->_bf._base)';;
- esac
- case "$stdio_bufsiz" in
- '') stdio_bufsiz='((fp)->_ub._base ? (fp)->_ub._size : (fp)->_bf._size)';;
- esac
-elif $contains '_IO_fpos_t' `./findhdr stdio.h` `./findhdr libio.h` >/dev/null 2>&1 ; then
- echo "(Looks like you have stdio.h from Linux.)"
- case "$stdio_ptr" in
- '') stdio_ptr='((fp)->_IO_read_ptr)'
- ptr_lval=$define
- ;;
- *) ptr_lval=$d_stdio_ptr_lval;;
- esac
- case "$stdio_cnt" in
- '') stdio_cnt='((fp)->_IO_read_end - (fp)->_IO_read_ptr)'
- cnt_lval=$undef
- ;;
- *) cnt_lval=$d_stdio_cnt_lval;;
- esac
- case "$stdio_base" in
- '') stdio_base='((fp)->_IO_read_base)';;
- esac
- case "$stdio_bufsiz" in
- '') stdio_bufsiz='((fp)->_IO_read_end - (fp)->_IO_read_base)';;
- esac
-else
- case "$stdio_ptr" in
- '') stdio_ptr='((fp)->_ptr)'
- ptr_lval=$define
- ;;
- *) ptr_lval=$d_stdio_ptr_lval;;
- esac
- case "$stdio_cnt" in
- '') stdio_cnt='((fp)->_cnt)'
- cnt_lval=$define
- ;;
- *) cnt_lval=$d_stdio_cnt_lval;;
- esac
- case "$stdio_base" in
- '') stdio_base='((fp)->_base)';;
- esac
- case "$stdio_bufsiz" in
- '') stdio_bufsiz='((fp)->_cnt + (fp)->_ptr - (fp)->_base)';;
- esac
-fi
-
-: test whether _ptr and _cnt really work
-echo "Checking how std your stdio is..." >&4
-$cat >try.c <<EOP
-#include <stdio.h>
-#define FILE_ptr(fp) $stdio_ptr
-#define FILE_cnt(fp) $stdio_cnt
-int main() {
- FILE *fp = fopen("try.c", "r");
- char c = getc(fp);
- if (
- 18 <= FILE_cnt(fp) &&
- strncmp(FILE_ptr(fp), "include <stdio.h>\n", 18) == 0
- )
- exit(0);
- exit(1);
-}
-EOP
-val="$undef"
-set try
-if eval $compile && $to try.c; then
- if $run ./try; then
- echo "Your stdio acts pretty std."
- val="$define"
- else
- echo "Your stdio isn't very std."
- fi
-else
- echo "Your stdio doesn't appear very std."
-fi
-$rm -f try.c try
-
-# glibc 2.2.90 and above apparently change stdio streams so Perl's
-# direct buffer manipulation no longer works. The Configure tests
-# should be changed to correctly detect this, but until then,
-# the following check should at least let perl compile and run.
-# (This quick fix should be updated before 5.8.1.)
-# To be defensive, reject all unknown versions, and all versions > 2.2.9.
-# A. Dougherty, June 3, 2002.
-case "$d_gnulibc" in
-$define)
- case "$gnulibc_version" in
- 2.[01]*) ;;
- 2.2) ;;
- 2.2.[0-9]) ;;
- *) echo "But I will not snoop inside glibc $gnulibc_version stdio buffers."
- val="$undef"
- ;;
- esac
- ;;
-esac
-set d_stdstdio
-eval $setvar
+echo " "
+set d_sresuproto setresuid $i_unistd unistd.h
+eval $hasproto
-: Can _ptr be used as an lvalue?
-case "$d_stdstdio$ptr_lval" in
-$define$define) val=$define ;;
-*) val=$undef ;;
-esac
-set d_stdio_ptr_lval
-eval $setvar
+: see if sys/stat.h is available
+set sys/stat.h i_sysstat
+eval $inhdr
-: Can _cnt be used as an lvalue?
-case "$d_stdstdio$cnt_lval" in
-$define$define) val=$define ;;
-*) val=$undef ;;
-esac
-set d_stdio_cnt_lval
-eval $setvar
+: see if stat knows about block sizes
+echo " "
+echo "Checking to see if your struct stat has st_blocks field..." >&4
+set d_statblks stat st_blocks $i_sysstat sys/stat.h
+eval $hasfield
-: test whether setting _ptr sets _cnt as a side effect
-d_stdio_ptr_lval_sets_cnt="$undef"
-d_stdio_ptr_lval_nochange_cnt="$undef"
-case "$d_stdio_ptr_lval$d_stdstdio" in
-$define$define)
- echo "Checking to see what happens if we set the stdio ptr..." >&4
-$cat >try.c <<EOP
-#include <stdio.h>
-/* Can we scream? */
-/* Eat dust sed :-) */
-/* In the buffer space, no one can hear you scream. */
-#define FILE_ptr(fp) $stdio_ptr
-#define FILE_cnt(fp) $stdio_cnt
-#include <sys/types.h>
-int main() {
- FILE *fp = fopen("try.c", "r");
- int c;
- char *ptr;
- size_t cnt;
- if (!fp) {
- puts("Fail even to read");
- exit(1);
- }
- c = getc(fp); /* Read away the first # */
- if (c == EOF) {
- puts("Fail even to read");
- exit(1);
- }
- if (!(
- 18 <= FILE_cnt(fp) &&
- strncmp(FILE_ptr(fp), "include <stdio.h>\n", 18) == 0
- )) {
- puts("Fail even to read");
- exit (1);
- }
- ptr = (char*) FILE_ptr(fp);
- cnt = (size_t)FILE_cnt(fp);
- FILE_ptr(fp) += 42;
+: see if this is a sys/vfs.h system
+set sys/vfs.h i_sysvfs
+eval $inhdr
- if ((char*)FILE_ptr(fp) != (ptr + 42)) {
- printf("Fail ptr check %p != %p", FILE_ptr(fp), (ptr + 42));
- exit (1);
- }
- if (FILE_cnt(fp) <= 20) {
- printf ("Fail (<20 chars to test)");
- exit (1);
- }
- if (strncmp(FILE_ptr(fp), "Eat dust sed :-) */\n", 20) != 0) {
- puts("Fail compare");
- exit (1);
- }
- if (cnt == FILE_cnt(fp)) {
- puts("Pass_unchanged");
- exit (0);
- }
- if (FILE_cnt(fp) == (cnt - 42)) {
- puts("Pass_changed");
- exit (0);
- }
- printf("Fail count was %d now %d\n", cnt, FILE_cnt(fp));
- return 1;
-}
-EOP
- set try
- if eval $compile && $to try.c; then
- case `$run ./try` in
- Pass_changed)
- echo "Increasing ptr in your stdio decreases cnt by the same amount. Good." >&4
- d_stdio_ptr_lval_sets_cnt="$define" ;;
- Pass_unchanged)
- echo "Increasing ptr in your stdio leaves cnt unchanged. Good." >&4
- d_stdio_ptr_lval_nochange_cnt="$define" ;;
- Fail*)
- echo "Increasing ptr in your stdio didn't do exactly what I expected. We'll not be doing that then." >&4 ;;
- *)
- echo "It appears attempting to set ptr in your stdio is a bad plan." >&4 ;;
- esac
- else
- echo "It seems we can't set ptr in your stdio. Nevermind." >&4
- fi
- $rm -f try.c try
- ;;
+: see if this is a sys/statfs.h system
+set sys/statfs.h i_sysstatfs
+eval $inhdr
+
+
+echo " "
+echo "Checking to see if your system supports struct statfs..." >&4
+set d_statfs_s statfs $i_systypes sys/types.h $i_sysparam sys/param.h $i_sysmount sys/mount.h $i_sysvfs sys/vfs.h $i_sysstatfs sys/statfs.h
+eval $hasstruct
+case "$d_statfs_s" in
+"$define") echo "Yes, it does." ;;
+*) echo "No, it doesn't." ;;
esac
-: see if _base is also standard
-val="$undef"
-case "$d_stdstdio" in
-$define)
- $cat >try.c <<EOP
-#include <stdio.h>
-#define FILE_base(fp) $stdio_base
-#define FILE_bufsiz(fp) $stdio_bufsiz
-int main() {
- FILE *fp = fopen("try.c", "r");
- char c = getc(fp);
- if (
- 19 <= FILE_bufsiz(fp) &&
- strncmp(FILE_base(fp), "#include <stdio.h>\n", 19) == 0
- )
- exit(0);
- exit(1);
-}
-EOP
- set try
- if eval $compile && $to try.c; then
- if $run ./try; then
- echo "And its _base field acts std."
- val="$define"
- else
- echo "But its _base field isn't std."
- fi
- else
- echo "However, it seems to be lacking the _base field."
- fi
- $rm -f try.c try
+
+
+: see if struct statfs knows about f_flags
+case "$d_statfs_s" in
+define)
+ echo " "
+ echo "Checking to see if your struct statfs has f_flags field..." >&4
+ set d_statfs_f_flags statfs f_flags $i_systypes sys/types.h $i_sysparam sys/param.h $i_sysmount sys/mount.h $i_sysvfs sys/vfs.h $i_sysstatfs sys/statfs.h
+ eval $hasfield
+ ;;
+*) val="$undef"
+ set d_statfs_f_flags
+ eval $setvar
;;
esac
-set d_stdiobase
-eval $setvar
+case "$d_statfs_f_flags" in
+"$define") echo "Yes, it does." ;;
+*) echo "No, it doesn't." ;;
+esac
$cat >&4 <<EOM
Checking how to access stdio streams by file descriptor number...
echo " "
echo "Checking to see if your C compiler can copy structs..." >&4
$cat >try.c <<'EOCP'
-main()
+int main()
{
struct blurfl {
int dyick;
set strftime d_strftime
eval $inlibc
+: see if strlcat exists
+set strlcat d_strlcat
+eval $inlibc
+
+: see if strlcpy exists
+set strlcpy d_strlcpy
+eval $inlibc
+
: see if strtod exists
set strtod d_strtod
eval $inlibc
EOM
$cat >try.c <<EOCP
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
#include <sys/types.h>
typedef $uvtype UV;
int main()
case "$d_u32align" in
'') $cat >try.c <<EOCP
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
#define U32 $u32type
#define BYTEORDER 0x$byteorder
#define U8 $u8type
buf[1] = 0;
buf[2] = 0;
buf[3] = 1;
+ buf[4] = 0;
buf[5] = 0;
buf[6] = 0;
- buf[7] = 0;
- buf[8] = 1;
+ buf[7] = 1;
for (i = 0; i < 4; i++) {
up = (U32*)(buf + i);
: set the base revision
baserev=5.0
-: how do we catenate cpp tokens here?
+: how do we concatenate cpp tokens here?
echo " "
-echo "Checking to see how your cpp does stuff like catenate tokens..." >&4
+echo "Checking to see how your cpp does stuff like concatenate tokens..." >&4
$cat >cpp_stuff.c <<'EOCP'
#define RCAT(a,b)a/**/b
#define ACAT(a,b)a ## b
cpp_stuff=1
else
$cat >&4 <<EOM
-Hmm, I don't seem to be able to catenate tokens with your cpp. You're going
-to have to edit the values of CAT[2-5] in config.h...
+Hmm, I don't seem to be able to concatenate tokens with your cpp.
+You're going to have to edit the values of CAT[2-5] in config.h...
EOM
cpp_stuff="/* Help! How do we handle cpp_stuff? */*/"
fi
#endif
#include <sys/types.h>
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
#include <db.h>
int main(int argc, char *argv[])
{
esac
$cat >>try.c <<EOCP
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
#$i_unistd I_UNISTD
#ifdef I_UNISTD
# include <unistd.h>
cat > try.c <<EOCP
#include <sys/types.h>
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
int main() {
printf("%d\n", (int)sizeof($gidtype));
exit(0);
set pid_t pidtype int stdio.h sys/types.h
eval $typedef_ask
-: Find earliest binary compatible site_perl subdirectory perl can use.
-xs_apiversion=$version # The current site_perl version.
-: Find earliest pure perl site_perl subdirectory perl can use.
-: The versioned directories started at 5.005.
-pm_apiversion='5.005'
-
: see if ar generates random libraries by itself
echo " "
echo "Checking how to generate random libraries on your machine..." >&4
echo 'int bar1() { return bar2(); }' > bar1.c
echo 'int bar2() { return 2; }' > bar2.c
-$cat > foo.c <<'EOP'
+$cat > foo.c <<EOP
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
int main() { printf("%d\n", bar1()); exit(0); }
EOP
$cc $ccflags -c bar1.c >/dev/null 2>&1
$run ./foobar >/dev/null 2>&1; then
echo "$ar appears to generate random libraries itself."
orderlib=false
- ranlib=":"
+ if [ "X$ranlib" = "X" ]; then
+ ranlib=":"
+ fi
elif $ar ts bar$_a >/dev/null 2>&1 &&
$cc -o foobar $ccflags $ldflags foo$_o bar$_a $libs > /dev/null 2>&1 &&
$run ./foobar >/dev/null 2>&1; then
: check for the select 'width'
case "$selectminbits" in
-'') case "$d_select" in
+'') safebits=`expr $ptrsize \* 8`
+ case "$d_select" in
$define)
$cat <<EOM
# include <sys/socket.h> /* Might include <sys/bsdtypes.h> */
#endif
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
$selecttype b;
#define S sizeof(*(b))
#define MINBITS 64
#define NBYTES (S * 8 > MINBITS ? S : MINBITS/8)
#define NBITS (NBYTES * 8)
int main() {
- char s[NBYTES];
+ char *s = malloc(NBYTES);
struct timeval t;
int i;
FILE* fp;
int fd;
+ if (!s)
+ exit(1);
fclose(stdin);
fp = fopen("try.c", "r");
if (fp == 0)
- exit(1);
+ exit(2);
fd = fileno(fp);
if (fd < 0)
- exit(2);
+ exit(3);
b = ($selecttype)s;
for (i = 0; i < NBITS; i++)
FD_SET(i, b);
t.tv_usec = 0;
select(fd + 1, b, 0, 0, &t);
for (i = NBITS - 1; i > fd && FD_ISSET(i, b); i--);
+ free(s);
printf("%d\n", i + 1);
return 0;
}
case "$selectminbits" in
'') cat >&4 <<EOM
Cannot figure out on how many bits at a time your select() operates.
-I'll play safe and guess it is 32 bits.
+I'll play safe and guess it is $safebits bits.
EOM
- selectminbits=32
- bits="32 bits"
+ selectminbits=$safebits
+ bits="$safebits bits"
;;
1) bits="1 bit" ;;
*) bits="$selectminbits bits" ;;
else
rp='What is the minimum number of bits your select() operates on?'
case "$byteorder" in
- 1234|12345678) dflt=32 ;;
+ 12345678) dflt=64 ;;
+ 1234) dflt=32 ;;
*) dflt=1 ;;
esac
. ./myread
$rm -f try.* try
;;
*) : no select, so pick a harmless default
- selectminbits='32'
+ selectminbits=$safebits
;;
esac
;;
xxx="$xxx USR3 USR4 VTALRM WAITING WINCH WIND WINDOW XCPU XFSZ"
: generate a few handy files for later
-$cat > signal.c <<'EOCP'
+$cat > signal.c <<EOCP
#include <sys/types.h>
#include <signal.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
#include <stdio.h>
int main() {
#endif
#ifndef NSIG
+# ifdef _SIG_MAX
+# define NSIG (_SIG_MAX+1)
+# endif
+#endif
+
+#ifndef NSIG
# ifdef MAXSIG
# define NSIG (MAXSIG+1)
# endif
#ifndef NSIG
# ifdef SIGARRAYSIZE
-# define NSIG (SIGARRAYSIZE+1) /* Not sure of the +1 */
+# define NSIG SIGARRAYSIZE /* Assume ary[SIGARRAYSIZE] */
# endif
#endif
$cat >signal.awk <<'EOP'
BEGIN { ndups = 0 }
$1 ~ /^NSIG$/ { nsig = $2 }
-($1 !~ /^NSIG$/) && (NF == 2) {
+($1 !~ /^NSIG$/) && (NF == 2) && ($2 ~ /^[0-9][0-9]*$/) {
if ($2 > maxsig) { maxsig = $2 }
if (sig_name[$2]) {
dup_name[ndups] = $1
cat > try.c <<EOCP
#include <sys/types.h>
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
int main() {
printf("%d\n", (int)sizeof($sizetype));
exit(0);
dflt="$ssizetype"
$cat > try.c <<EOM
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
#include <sys/types.h>
#define Size_t $sizetype
#define SSize_t $dflt
cat > try.c <<EOCP
#include <sys/types.h>
#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
int main() {
printf("%d\n", (int)sizeof($uidtype));
exit(0);
;;
esac
+
+case "$usesitecustomize" in
+ $define|true|[Yy]*)
+ usesitecustomize="$define"
+ ;;
+ *)
+ usesitecustomize="$undef"
+ ;;
+ esac
+
: determine compiler compiler
case "$yacc" in
'')
-: see if this is a math.h system
-set math.h i_math
-eval $inhdr
-
: see if this is a mntent.h system
set mntent.h i_mntent
eval $inhdr
$cat <<'EOSH' > Cppsym.know
a29k ABI64 aegis AES_SOURCE AIX AIX32 AIX370
AIX41 AIX42 AIX43 AIX_SOURCE aixpc ALL_SOURCE
-alliant alpha am29000 AM29000 AMD64 amiga AMIGAOS AMIX
+alliant alpha am29000 AM29000 AMD64 amd64 amiga AMIGAOS AMIX
ansi ANSI_C_SOURCE apollo ardent ARM32 atarist att386 att3b
BeOS BIG_ENDIAN BIT_MSF bsd BSD bsd43 bsd4_2 bsd4_3 BSD4_3 bsd4_4
BSD_4_3 BSD_4_4 BSD_NET2 BSD_TIME BSD_TYPES BSDCOMPAT bsdi
bull c cadmus clipper CMU COFF COMPILER_VERSION
concurrent convex cpu cray CRAY CRAYMPP ctix CX_UX
-CYGWIN DGUX DGUX_SOURCE DJGPP dmert DOLPHIN DPX2 DSO
+CYGWIN DECC DGUX DGUX_SOURCE DJGPP dmert DOLPHIN DPX2 DSO
Dynix DynixPTX ELF encore EPI EXTENSIONS FAVOR_BSD
FILE_OFFSET_BITS FreeBSD GCC_NEW_VARARGS gcos gcx gimpel
GLIBC GLIBC_MINOR
USE_MISC USE_POSIX USE_POSIX199309 USE_POSIX199506 USE_POSIX2
USE_REENTRANT USE_SVID USE_UNIX98 USE_XOPEN USE_XOPEN_EXTENDED
USGr4 USGr4_2
-Utek UTek UTS UWIN uxpm uxps vax venix VMESA vms xenix Xenix286
+Utek UTek UTS UWIN uxpm uxps vax venix VMESA vms x86_64 xenix Xenix286
XOPEN_SOURCE XOPEN_SOURCE_EXTENDED XPG2 XPG2_EXTENDED
XPG3 XPG3_EXTENDED XPG4 XPG4_EXTENDED
z8000
shift
avail_ext="$*"
+case "$onlyextensions" in
+'') ;;
+*) keepextensions=''
+ echo "You have requested that only certains extensions be included..." >&4
+ for i in $onlyextensions; do
+ case " $avail_ext " in
+ *" $i "*)
+ echo "Keeping extension $i."
+ keepextensions="$keepextensions $i"
+ ;;
+ *) echo "Ignoring extension $i." ;;
+ esac
+ done
+ avail_ext="$keepextensions"
+ ;;
+esac
+
+case "$noextensions" in
+'') ;;
+*) keepextensions=''
+ echo "You have requested that certain extensions be ignored..." >&4
+ for i in $avail_ext; do
+ case " $noextensions " in
+ *" $i "*) echo "Ignoring extension $i." ;;
+ *) echo "Keeping extension $i.";
+ keepextensions="$keepextensions $i"
+ ;;
+ esac
+ done
+ avail_ext="$keepextensions"
+ ;;
+esac
+
: Now see which nonxs extensions are supported on this system.
: For now assume all are.
nonxs_ext=''
shift
extensions="$*"
+# Sanity check: We require an extension suitable for use with
+# AnyDBM_File, as well as Fcntl and IO. (Failure to have these
+# should show up as failures in the test suite, but it's helpful to
+# catch them now.) The 'extensions' list is normally sorted
+# alphabetically, so we need to accept either
+# DB_File ... Fcntl ... IO ....
+# or something like
+# Fcntl ... NDBM_File ... IO ....
+case " $extensions" in
+*"_File "*" Fcntl "*" IO "*) ;; # DB_File
+*" Fcntl "*"_File "*" IO "*) ;; # GDBM_File
+*" Fcntl "*" IO "*"_File "*) ;; # NDBM_File
+*) echo "WARNING: Extensions DB_File or *DBM_File, Fcntl, and IO not configured." >&4
+ echo "WARNING: The Perl you are building will be quite crippled." >& 4
+ ;;
+esac
+
: Remove libraries needed only for extensions
: The appropriate ext/Foo/Makefile.PL will add them back in, if necessary.
: The exception is SunOS 4.x, which needs them.
d__fwalk='$d__fwalk'
d_access='$d_access'
d_accessx='$d_accessx'
+d_aintl='$d_aintl'
d_alarm='$d_alarm'
d_archlib='$d_archlib'
d_asctime_r='$d_asctime_r'
d_atolf='$d_atolf'
d_atoll='$d_atoll'
-d_attribut='$d_attribut'
+d_attribute_format='$d_attribute_format'
+d_attribute_malloc='$d_attribute_malloc'
+d_attribute_nonnull='$d_attribute_nonnull'
+d_attribute_noreturn='$d_attribute_noreturn'
+d_attribute_pure='$d_attribute_pure'
+d_attribute_unused='$d_attribute_unused'
+d_attribute_warn_unused_result='$d_attribute_warn_unused_result'
d_bcmp='$d_bcmp'
d_bcopy='$d_bcopy'
d_bsd='$d_bsd'
d_closedir='$d_closedir'
d_cmsghdr_s='$d_cmsghdr_s'
d_const='$d_const'
+d_copysignl='$d_copysignl'
d_crypt='$d_crypt'
d_crypt_r='$d_crypt_r'
d_csh='$d_csh'
d_endservent_r='$d_endservent_r'
d_eofnblk='$d_eofnblk'
d_eunice='$d_eunice'
+d_faststdio='$d_faststdio'
d_fchdir='$d_fchdir'
d_fchmod='$d_fchmod'
d_fchown='$d_fchown'
d_grpasswd='$d_grpasswd'
d_hasmntopt='$d_hasmntopt'
d_htonl='$d_htonl'
+d_ilogbl='$d_ilogbl'
d_index='$d_index'
d_inetaton='$d_inetaton'
d_int64_t='$d_int64_t'
d_killpg='$d_killpg'
d_lchown='$d_lchown'
d_ldbl_dig='$d_ldbl_dig'
+d_libm_lib_version='$d_libm_lib_version'
d_link='$d_link'
d_localtime_r='$d_localtime_r'
d_locconv='$d_locconv'
d_lseekproto='$d_lseekproto'
d_lstat='$d_lstat'
d_madvise='$d_madvise'
+d_malloc_good_size='$d_malloc_good_size'
+d_malloc_size='$d_malloc_size'
d_mblen='$d_mblen'
d_mbstowcs='$d_mbstowcs'
d_mbtowc='$d_mbtowc'
d_msync='$d_msync'
d_munmap='$d_munmap'
d_mymalloc='$d_mymalloc'
-d_nanosleep='$d_nanosleep'
d_nice='$d_nice'
d_nl_langinfo='$d_nl_langinfo'
d_nv_preserves_uv='$d_nv_preserves_uv'
+d_nv_zero_is_allbits_zero='$d_nv_zero_is_allbits_zero'
d_off64_t='$d_off64_t'
d_old_pthread_create_joinable='$d_old_pthread_create_joinable'
d_oldpthreads='$d_oldpthreads'
d_portable='$d_portable'
d_procselfexe='$d_procselfexe'
d_pthread_atfork='$d_pthread_atfork'
+d_pthread_attr_setscope='$d_pthread_attr_setscope'
d_pthread_yield='$d_pthread_yield'
d_pwage='$d_pwage'
d_pwchange='$d_pwchange'
d_safemcpy='$d_safemcpy'
d_sanemcmp='$d_sanemcmp'
d_sbrkproto='$d_sbrkproto'
+d_scalbnl='$d_scalbnl'
d_sched_yield='$d_sched_yield'
d_scm_rights='$d_scm_rights'
d_seekdir='$d_seekdir'
d_strerror='$d_strerror'
d_strerror_r='$d_strerror_r'
d_strftime='$d_strftime'
+d_strlcat='$d_strlcat'
+d_strlcpy='$d_strlcpy'
d_strtod='$d_strtod'
d_strtol='$d_strtol'
d_strtold='$d_strtold'
installscript='$installscript'
installsitearch='$installsitearch'
installsitebin='$installsitebin'
-installsitehtml1='$installsitehtml1'
-installsitehtml3='$installsitehtml3'
+installsitehtml1dir='$installsitehtml1dir'
+installsitehtml3dir='$installsitehtml3dir'
installsitelib='$installsitelib'
-installsiteman1='$installsiteman1'
-installsiteman3='$installsiteman3'
+installsiteman1dir='$installsiteman1dir'
+installsiteman3dir='$installsiteman3dir'
installsitescript='$installsitescript'
installstyle='$installstyle'
installusrbinperl='$installusrbinperl'
installvendorarch='$installvendorarch'
installvendorbin='$installvendorbin'
-installvendorhtml1='$installvendorhtml1'
-installvendorhtml3='$installvendorhtml3'
+installvendorhtml1dir='$installvendorhtml1dir'
+installvendorhtml3dir='$installvendorhtml3dir'
installvendorlib='$installvendorlib'
-installvendorman1='$installvendorman1'
-installvendorman3='$installvendorman3'
+installvendorman1dir='$installvendorman1dir'
+installvendorman3dir='$installvendorman3dir'
installvendorscript='$installvendorscript'
intsize='$intsize'
issymlink='$issymlink'
man3direxp='$man3direxp'
man3ext='$man3ext'
mips_type='$mips_type'
+mistrustnm='$mistrustnm'
mkdir='$mkdir'
mmaptype='$mmaptype'
modetype='$modetype'
phostname='$phostname'
pidtype='$pidtype'
plibpth='$plibpth'
-pm_apiversion='$pm_apiversion'
pmake='$pmake'
pr='$pr'
prefix='$prefix'
sitearchexp='$sitearchexp'
sitebin='$sitebin'
sitebinexp='$sitebinexp'
-sitehtml1='$sitehtml1'
-sitehtml1exp='$sitehtml1exp'
-sitehtml3='$sitehtml3'
-sitehtml3exp='$sitehtml3exp'
+sitehtml1dir='$sitehtml1dir'
+sitehtml1direxp='$sitehtml1direxp'
+sitehtml3dir='$sitehtml3dir'
+sitehtml3direxp='$sitehtml3direxp'
sitelib='$sitelib'
sitelib_stem='$sitelib_stem'
sitelibexp='$sitelibexp'
-siteman1='$siteman1'
-siteman1exp='$siteman1exp'
-siteman3='$siteman3'
-siteman3exp='$siteman3exp'
+siteman1dir='$siteman1dir'
+siteman1direxp='$siteman1direxp'
+siteman3dir='$siteman3dir'
+siteman3direxp='$siteman3direxp'
siteprefix='$siteprefix'
siteprefixexp='$siteprefixexp'
sitescript='$sitescript'
use64bitint='$use64bitint'
usecrosscompile='$usecrosscompile'
usedl='$usedl'
+usefaststdio='$usefaststdio'
useithreads='$useithreads'
uselargefiles='$uselargefiles'
uselongdouble='$uselongdouble'
+usemallocwrap='$usemallocwrap'
usemorebits='$usemorebits'
usemultiplicity='$usemultiplicity'
usemymalloc='$usemymalloc'
useperlio='$useperlio'
useposix='$useposix'
usereentrant='$usereentrant'
+userelocatableinc='$userelocatableinc'
usesfio='$usesfio'
useshrplib='$useshrplib'
+usesitecustomize='$usesitecustomize'
usesocks='$usesocks'
usethreads='$usethreads'
usevendorprefix='$usevendorprefix'
vendorarchexp='$vendorarchexp'
vendorbin='$vendorbin'
vendorbinexp='$vendorbinexp'
-vendorhtml1='$vendorhtml1'
-vendorhtml1exp='$vendorhtml1exp'
-vendorhtml3='$vendorhtml3'
-vendorhtml3exp='$vendorhtml3exp'
+vendorhtml1dir='$vendorhtml1dir'
+vendorhtml1direxp='$vendorhtml1direxp'
+vendorhtml3dir='$vendorhtml3dir'
+vendorhtml3direxp='$vendorhtml3direxp'
vendorlib='$vendorlib'
vendorlib_stem='$vendorlib_stem'
vendorlibexp='$vendorlibexp'
-vendorman1='$vendorman1'
-vendorman1exp='$vendorman1exp'
-vendorman3='$vendorman3'
-vendorman3exp='$vendorman3exp'
+vendorman1dir='$vendorman1dir'
+vendorman1direxp='$vendorman1direxp'
+vendorman3dir='$vendorman3dir'
+vendorman3direxp='$vendorman3direxp'
vendorprefix='$vendorprefix'
vendorprefixexp='$vendorprefixexp'
vendorscript='$vendorscript'
vi='$vi'
voidflags='$voidflags'
xlibpth='$xlibpth'
-xs_apiversion='$xs_apiversion'
yacc='$yacc'
yaccflags='$yaccflags'
zcat='$zcat'
https://perl5.git.perl.org / perl5.git / blobdiff