This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
charnames: Correct pod misstatement
[perl5.git] / lib / charnames.pm
index 2ff0c1d..25c087d 100644 (file)
 package charnames;
 use strict;
 use warnings;
 package charnames;
 use strict;
 use warnings;
-use File::Spec;
-our $VERSION = '1.16';
+our $VERSION = '1.33';
+use unicore::Name;    # mktables-generated algorithmically-defined names
+use _charnames ();    # The submodule for this where most of the work gets done
 
 use bytes ();          # for $bytes::hint_bits
 
 use bytes ();          # for $bytes::hint_bits
+use re "/aa";          # Everything in here should be ASCII
 
 
-# The hashes are stored as utf8 strings.  This makes it easier to deal with
-# sequences.  I (khw) also tried making Name.pl utf8, but it slowed things
-# down by a factor of 7.  I then tried making Name.pl store the ut8
-# equivalents but not calling them utf8.  That led to similar speed as leaving
-# it alone, but since that is harder for a human to parse, I left it as-is.
-
-my %system_aliases = (
-    # Icky 3.2 names with parentheses.
-    'LINE FEED'             => pack("U", 0x0A), # LINE FEED (LF)
-    'FORM FEED'             => pack("U", 0x0C), # FORM FEED (FF)
-    'CARRIAGE RETURN'       => pack("U", 0x0D), # CARRIAGE RETURN (CR)
-    'NEXT LINE'             => pack("U", 0x85), # NEXT LINE (NEL)
-
-    # Some variant names from Wikipedia
-    'SINGLE-SHIFT 2'                => pack("U", 0x8E),
-    'SINGLE-SHIFT 3'                => pack("U", 0x8F),
-    'PRIVATE USE 1'                 => pack("U", 0x91),
-    'PRIVATE USE 2'                 => pack("U", 0x92),
-    'START OF PROTECTED AREA'       => pack("U", 0x96),
-    'END OF PROTECTED AREA'         => pack("U", 0x97),
-
-    # Convenience.  Standard abbreviations for the controls
-    'NUL'           => pack("U", 0x00), # NULL
-    'SOH'           => pack("U", 0x01), # START OF HEADING
-    'STX'           => pack("U", 0x02), # START OF TEXT
-    'ETX'           => pack("U", 0x03), # END OF TEXT
-    'EOT'           => pack("U", 0x04), # END OF TRANSMISSION
-    'ENQ'           => pack("U", 0x05), # ENQUIRY
-    'ACK'           => pack("U", 0x06), # ACKNOWLEDGE
-    'BEL'           => pack("U", 0x07), # BELL
-    'BS'            => pack("U", 0x08), # BACKSPACE
-    'HT'            => pack("U", 0x09), # HORIZONTAL TABULATION
-    'LF'            => pack("U", 0x0A), # LINE FEED (LF)
-    'VT'            => pack("U", 0x0B), # VERTICAL TABULATION
-    'FF'            => pack("U", 0x0C), # FORM FEED (FF)
-    'CR'            => pack("U", 0x0D), # CARRIAGE RETURN (CR)
-    'SO'            => pack("U", 0x0E), # SHIFT OUT
-    'SI'            => pack("U", 0x0F), # SHIFT IN
-    'DLE'           => pack("U", 0x10), # DATA LINK ESCAPE
-    'DC1'           => pack("U", 0x11), # DEVICE CONTROL ONE
-    'DC2'           => pack("U", 0x12), # DEVICE CONTROL TWO
-    'DC3'           => pack("U", 0x13), # DEVICE CONTROL THREE
-    'DC4'           => pack("U", 0x14), # DEVICE CONTROL FOUR
-    'NAK'           => pack("U", 0x15), # NEGATIVE ACKNOWLEDGE
-    'SYN'           => pack("U", 0x16), # SYNCHRONOUS IDLE
-    'ETB'           => pack("U", 0x17), # END OF TRANSMISSION BLOCK
-    'CAN'           => pack("U", 0x18), # CANCEL
-    'EOM'           => pack("U", 0x19), # END OF MEDIUM
-    'SUB'           => pack("U", 0x1A), # SUBSTITUTE
-    'ESC'           => pack("U", 0x1B), # ESCAPE
-    'FS'            => pack("U", 0x1C), # FILE SEPARATOR
-    'GS'            => pack("U", 0x1D), # GROUP SEPARATOR
-    'RS'            => pack("U", 0x1E), # RECORD SEPARATOR
-    'US'            => pack("U", 0x1F), # UNIT SEPARATOR
-    'DEL'           => pack("U", 0x7F), # DELETE
-    'BPH'           => pack("U", 0x82), # BREAK PERMITTED HERE
-    'NBH'           => pack("U", 0x83), # NO BREAK HERE
-    'NEL'           => pack("U", 0x85), # NEXT LINE (NEL)
-    'SSA'           => pack("U", 0x86), # START OF SELECTED AREA
-    'ESA'           => pack("U", 0x87), # END OF SELECTED AREA
-    'HTS'           => pack("U", 0x88), # CHARACTER TABULATION SET
-    'HTJ'           => pack("U", 0x89), # CHARACTER TABULATION WITH JUSTIFICATION
-    'VTS'           => pack("U", 0x8A), # LINE TABULATION SET
-    'PLD'           => pack("U", 0x8B), # PARTIAL LINE FORWARD
-    'PLU'           => pack("U", 0x8C), # PARTIAL LINE BACKWARD
-    'RI '           => pack("U", 0x8D), # REVERSE LINE FEED
-    'SS2'           => pack("U", 0x8E), # SINGLE SHIFT TWO
-    'SS3'           => pack("U", 0x8F), # SINGLE SHIFT THREE
-    'DCS'           => pack("U", 0x90), # DEVICE CONTROL STRING
-    'PU1'           => pack("U", 0x91), # PRIVATE USE ONE
-    'PU2'           => pack("U", 0x92), # PRIVATE USE TWO
-    'STS'           => pack("U", 0x93), # SET TRANSMIT STATE
-    'CCH'           => pack("U", 0x94), # CANCEL CHARACTER
-    'MW '           => pack("U", 0x95), # MESSAGE WAITING
-    'SPA'           => pack("U", 0x96), # START OF GUARDED AREA
-    'EPA'           => pack("U", 0x97), # END OF GUARDED AREA
-    'SOS'           => pack("U", 0x98), # START OF STRING
-    'SCI'           => pack("U", 0x9A), # SINGLE CHARACTER INTRODUCER
-    'CSI'           => pack("U", 0x9B), # CONTROL SEQUENCE INTRODUCER
-    'ST '           => pack("U", 0x9C), # STRING TERMINATOR
-    'OSC'           => pack("U", 0x9D), # OPERATING SYSTEM COMMAND
-    'PM '           => pack("U", 0x9E), # PRIVACY MESSAGE
-    'APC'           => pack("U", 0x9F), # APPLICATION PROGRAM COMMAND
-
-    # There are no names for these in the Unicode standard;
-    # perhaps should be deprecated, but then again there are
-    # no alternative names, so am not deprecating.  And if
-    # did, the code would have to change to not recommend an
-    # alternative for these.
-    'PADDING CHARACTER'                     => pack("U", 0x80),
-    'PAD'                                   => pack("U", 0x80),
-    'HIGH OCTET PRESET'                     => pack("U", 0x81),
-    'HOP'                                   => pack("U", 0x81),
-    'INDEX'                                 => pack("U", 0x84),
-    'IND'                                   => pack("U", 0x84),
-    'SINGLE GRAPHIC CHARACTER INTRODUCER'   => pack("U", 0x99),
-    'SGC'                                   => pack("U", 0x99),
-
-    # More convenience.  For further convenience,
-    # it is suggested some way of using the NamesList
-    # aliases be implemented, but there are ambiguities in
-    # NamesList.txt
-    'BOM'   => pack("U", 0xFEFF), # BYTE ORDER MARK
-    'BYTE ORDER MARK'=> pack("U", 0xFEFF),
-    'CGJ'   => pack("U", 0x034F), # COMBINING GRAPHEME JOINER
-    'FVS1'  => pack("U", 0x180B), # MONGOLIAN FREE VARIATION SELECTOR ONE
-    'FVS2'  => pack("U", 0x180C), # MONGOLIAN FREE VARIATION SELECTOR TWO
-    'FVS3'  => pack("U", 0x180D), # MONGOLIAN FREE VARIATION SELECTOR THREE
-    'LRE'   => pack("U", 0x202A), # LEFT-TO-RIGHT EMBEDDING
-    'LRM'   => pack("U", 0x200E), # LEFT-TO-RIGHT MARK
-    'LRO'   => pack("U", 0x202D), # LEFT-TO-RIGHT OVERRIDE
-    'MMSP'  => pack("U", 0x205F), # MEDIUM MATHEMATICAL SPACE
-    'MVS'   => pack("U", 0x180E), # MONGOLIAN VOWEL SEPARATOR
-    'NBSP'  => pack("U", 0x00A0), # NO-BREAK SPACE
-    'NNBSP' => pack("U", 0x202F), # NARROW NO-BREAK SPACE
-    'PDF'   => pack("U", 0x202C), # POP DIRECTIONAL FORMATTING
-    'RLE'   => pack("U", 0x202B), # RIGHT-TO-LEFT EMBEDDING
-    'RLM'   => pack("U", 0x200F), # RIGHT-TO-LEFT MARK
-    'RLO'   => pack("U", 0x202E), # RIGHT-TO-LEFT OVERRIDE
-    'SHY'   => pack("U", 0x00AD), # SOFT HYPHEN
-    'VS1'   => pack("U", 0xFE00), # VARIATION SELECTOR-1
-    'VS2'   => pack("U", 0xFE01), # VARIATION SELECTOR-2
-    'VS3'   => pack("U", 0xFE02), # VARIATION SELECTOR-3
-    'VS4'   => pack("U", 0xFE03), # VARIATION SELECTOR-4
-    'VS5'   => pack("U", 0xFE04), # VARIATION SELECTOR-5
-    'VS6'   => pack("U", 0xFE05), # VARIATION SELECTOR-6
-    'VS7'   => pack("U", 0xFE06), # VARIATION SELECTOR-7
-    'VS8'   => pack("U", 0xFE07), # VARIATION SELECTOR-8
-    'VS9'   => pack("U", 0xFE08), # VARIATION SELECTOR-9
-    'VS10'  => pack("U", 0xFE09), # VARIATION SELECTOR-10
-    'VS11'  => pack("U", 0xFE0A), # VARIATION SELECTOR-11
-    'VS12'  => pack("U", 0xFE0B), # VARIATION SELECTOR-12
-    'VS13'  => pack("U", 0xFE0C), # VARIATION SELECTOR-13
-    'VS14'  => pack("U", 0xFE0D), # VARIATION SELECTOR-14
-    'VS15'  => pack("U", 0xFE0E), # VARIATION SELECTOR-15
-    'VS16'  => pack("U", 0xFE0F), # VARIATION SELECTOR-16
-    'VS17'  => pack("U", 0xE0100), # VARIATION SELECTOR-17
-    'VS18'  => pack("U", 0xE0101), # VARIATION SELECTOR-18
-    'VS19'  => pack("U", 0xE0102), # VARIATION SELECTOR-19
-    'VS20'  => pack("U", 0xE0103), # VARIATION SELECTOR-20
-    'VS21'  => pack("U", 0xE0104), # VARIATION SELECTOR-21
-    'VS22'  => pack("U", 0xE0105), # VARIATION SELECTOR-22
-    'VS23'  => pack("U", 0xE0106), # VARIATION SELECTOR-23
-    'VS24'  => pack("U", 0xE0107), # VARIATION SELECTOR-24
-    'VS25'  => pack("U", 0xE0108), # VARIATION SELECTOR-25
-    'VS26'  => pack("U", 0xE0109), # VARIATION SELECTOR-26
-    'VS27'  => pack("U", 0xE010A), # VARIATION SELECTOR-27
-    'VS28'  => pack("U", 0xE010B), # VARIATION SELECTOR-28
-    'VS29'  => pack("U", 0xE010C), # VARIATION SELECTOR-29
-    'VS30'  => pack("U", 0xE010D), # VARIATION SELECTOR-30
-    'VS31'  => pack("U", 0xE010E), # VARIATION SELECTOR-31
-    'VS32'  => pack("U", 0xE010F), # VARIATION SELECTOR-32
-    'VS33'  => pack("U", 0xE0110), # VARIATION SELECTOR-33
-    'VS34'  => pack("U", 0xE0111), # VARIATION SELECTOR-34
-    'VS35'  => pack("U", 0xE0112), # VARIATION SELECTOR-35
-    'VS36'  => pack("U", 0xE0113), # VARIATION SELECTOR-36
-    'VS37'  => pack("U", 0xE0114), # VARIATION SELECTOR-37
-    'VS38'  => pack("U", 0xE0115), # VARIATION SELECTOR-38
-    'VS39'  => pack("U", 0xE0116), # VARIATION SELECTOR-39
-    'VS40'  => pack("U", 0xE0117), # VARIATION SELECTOR-40
-    'VS41'  => pack("U", 0xE0118), # VARIATION SELECTOR-41
-    'VS42'  => pack("U", 0xE0119), # VARIATION SELECTOR-42
-    'VS43'  => pack("U", 0xE011A), # VARIATION SELECTOR-43
-    'VS44'  => pack("U", 0xE011B), # VARIATION SELECTOR-44
-    'VS45'  => pack("U", 0xE011C), # VARIATION SELECTOR-45
-    'VS46'  => pack("U", 0xE011D), # VARIATION SELECTOR-46
-    'VS47'  => pack("U", 0xE011E), # VARIATION SELECTOR-47
-    'VS48'  => pack("U", 0xE011F), # VARIATION SELECTOR-48
-    'VS49'  => pack("U", 0xE0120), # VARIATION SELECTOR-49
-    'VS50'  => pack("U", 0xE0121), # VARIATION SELECTOR-50
-    'VS51'  => pack("U", 0xE0122), # VARIATION SELECTOR-51
-    'VS52'  => pack("U", 0xE0123), # VARIATION SELECTOR-52
-    'VS53'  => pack("U", 0xE0124), # VARIATION SELECTOR-53
-    'VS54'  => pack("U", 0xE0125), # VARIATION SELECTOR-54
-    'VS55'  => pack("U", 0xE0126), # VARIATION SELECTOR-55
-    'VS56'  => pack("U", 0xE0127), # VARIATION SELECTOR-56
-    'VS57'  => pack("U", 0xE0128), # VARIATION SELECTOR-57
-    'VS58'  => pack("U", 0xE0129), # VARIATION SELECTOR-58
-    'VS59'  => pack("U", 0xE012A), # VARIATION SELECTOR-59
-    'VS60'  => pack("U", 0xE012B), # VARIATION SELECTOR-60
-    'VS61'  => pack("U", 0xE012C), # VARIATION SELECTOR-61
-    'VS62'  => pack("U", 0xE012D), # VARIATION SELECTOR-62
-    'VS63'  => pack("U", 0xE012E), # VARIATION SELECTOR-63
-    'VS64'  => pack("U", 0xE012F), # VARIATION SELECTOR-64
-    'VS65'  => pack("U", 0xE0130), # VARIATION SELECTOR-65
-    'VS66'  => pack("U", 0xE0131), # VARIATION SELECTOR-66
-    'VS67'  => pack("U", 0xE0132), # VARIATION SELECTOR-67
-    'VS68'  => pack("U", 0xE0133), # VARIATION SELECTOR-68
-    'VS69'  => pack("U", 0xE0134), # VARIATION SELECTOR-69
-    'VS70'  => pack("U", 0xE0135), # VARIATION SELECTOR-70
-    'VS71'  => pack("U", 0xE0136), # VARIATION SELECTOR-71
-    'VS72'  => pack("U", 0xE0137), # VARIATION SELECTOR-72
-    'VS73'  => pack("U", 0xE0138), # VARIATION SELECTOR-73
-    'VS74'  => pack("U", 0xE0139), # VARIATION SELECTOR-74
-    'VS75'  => pack("U", 0xE013A), # VARIATION SELECTOR-75
-    'VS76'  => pack("U", 0xE013B), # VARIATION SELECTOR-76
-    'VS77'  => pack("U", 0xE013C), # VARIATION SELECTOR-77
-    'VS78'  => pack("U", 0xE013D), # VARIATION SELECTOR-78
-    'VS79'  => pack("U", 0xE013E), # VARIATION SELECTOR-79
-    'VS80'  => pack("U", 0xE013F), # VARIATION SELECTOR-80
-    'VS81'  => pack("U", 0xE0140), # VARIATION SELECTOR-81
-    'VS82'  => pack("U", 0xE0141), # VARIATION SELECTOR-82
-    'VS83'  => pack("U", 0xE0142), # VARIATION SELECTOR-83
-    'VS84'  => pack("U", 0xE0143), # VARIATION SELECTOR-84
-    'VS85'  => pack("U", 0xE0144), # VARIATION SELECTOR-85
-    'VS86'  => pack("U", 0xE0145), # VARIATION SELECTOR-86
-    'VS87'  => pack("U", 0xE0146), # VARIATION SELECTOR-87
-    'VS88'  => pack("U", 0xE0147), # VARIATION SELECTOR-88
-    'VS89'  => pack("U", 0xE0148), # VARIATION SELECTOR-89
-    'VS90'  => pack("U", 0xE0149), # VARIATION SELECTOR-90
-    'VS91'  => pack("U", 0xE014A), # VARIATION SELECTOR-91
-    'VS92'  => pack("U", 0xE014B), # VARIATION SELECTOR-92
-    'VS93'  => pack("U", 0xE014C), # VARIATION SELECTOR-93
-    'VS94'  => pack("U", 0xE014D), # VARIATION SELECTOR-94
-    'VS95'  => pack("U", 0xE014E), # VARIATION SELECTOR-95
-    'VS96'  => pack("U", 0xE014F), # VARIATION SELECTOR-96
-    'VS97'  => pack("U", 0xE0150), # VARIATION SELECTOR-97
-    'VS98'  => pack("U", 0xE0151), # VARIATION SELECTOR-98
-    'VS99'  => pack("U", 0xE0152), # VARIATION SELECTOR-99
-    'VS100' => pack("U", 0xE0153), # VARIATION SELECTOR-100
-    'VS101' => pack("U", 0xE0154), # VARIATION SELECTOR-101
-    'VS102' => pack("U", 0xE0155), # VARIATION SELECTOR-102
-    'VS103' => pack("U", 0xE0156), # VARIATION SELECTOR-103
-    'VS104' => pack("U", 0xE0157), # VARIATION SELECTOR-104
-    'VS105' => pack("U", 0xE0158), # VARIATION SELECTOR-105
-    'VS106' => pack("U", 0xE0159), # VARIATION SELECTOR-106
-    'VS107' => pack("U", 0xE015A), # VARIATION SELECTOR-107
-    'VS108' => pack("U", 0xE015B), # VARIATION SELECTOR-108
-    'VS109' => pack("U", 0xE015C), # VARIATION SELECTOR-109
-    'VS110' => pack("U", 0xE015D), # VARIATION SELECTOR-110
-    'VS111' => pack("U", 0xE015E), # VARIATION SELECTOR-111
-    'VS112' => pack("U", 0xE015F), # VARIATION SELECTOR-112
-    'VS113' => pack("U", 0xE0160), # VARIATION SELECTOR-113
-    'VS114' => pack("U", 0xE0161), # VARIATION SELECTOR-114
-    'VS115' => pack("U", 0xE0162), # VARIATION SELECTOR-115
-    'VS116' => pack("U", 0xE0163), # VARIATION SELECTOR-116
-    'VS117' => pack("U", 0xE0164), # VARIATION SELECTOR-117
-    'VS118' => pack("U", 0xE0165), # VARIATION SELECTOR-118
-    'VS119' => pack("U", 0xE0166), # VARIATION SELECTOR-119
-    'VS120' => pack("U", 0xE0167), # VARIATION SELECTOR-120
-    'VS121' => pack("U", 0xE0168), # VARIATION SELECTOR-121
-    'VS122' => pack("U", 0xE0169), # VARIATION SELECTOR-122
-    'VS123' => pack("U", 0xE016A), # VARIATION SELECTOR-123
-    'VS124' => pack("U", 0xE016B), # VARIATION SELECTOR-124
-    'VS125' => pack("U", 0xE016C), # VARIATION SELECTOR-125
-    'VS126' => pack("U", 0xE016D), # VARIATION SELECTOR-126
-    'VS127' => pack("U", 0xE016E), # VARIATION SELECTOR-127
-    'VS128' => pack("U", 0xE016F), # VARIATION SELECTOR-128
-    'VS129' => pack("U", 0xE0170), # VARIATION SELECTOR-129
-    'VS130' => pack("U", 0xE0171), # VARIATION SELECTOR-130
-    'VS131' => pack("U", 0xE0172), # VARIATION SELECTOR-131
-    'VS132' => pack("U", 0xE0173), # VARIATION SELECTOR-132
-    'VS133' => pack("U", 0xE0174), # VARIATION SELECTOR-133
-    'VS134' => pack("U", 0xE0175), # VARIATION SELECTOR-134
-    'VS135' => pack("U", 0xE0176), # VARIATION SELECTOR-135
-    'VS136' => pack("U", 0xE0177), # VARIATION SELECTOR-136
-    'VS137' => pack("U", 0xE0178), # VARIATION SELECTOR-137
-    'VS138' => pack("U", 0xE0179), # VARIATION SELECTOR-138
-    'VS139' => pack("U", 0xE017A), # VARIATION SELECTOR-139
-    'VS140' => pack("U", 0xE017B), # VARIATION SELECTOR-140
-    'VS141' => pack("U", 0xE017C), # VARIATION SELECTOR-141
-    'VS142' => pack("U", 0xE017D), # VARIATION SELECTOR-142
-    'VS143' => pack("U", 0xE017E), # VARIATION SELECTOR-143
-    'VS144' => pack("U", 0xE017F), # VARIATION SELECTOR-144
-    'VS145' => pack("U", 0xE0180), # VARIATION SELECTOR-145
-    'VS146' => pack("U", 0xE0181), # VARIATION SELECTOR-146
-    'VS147' => pack("U", 0xE0182), # VARIATION SELECTOR-147
-    'VS148' => pack("U", 0xE0183), # VARIATION SELECTOR-148
-    'VS149' => pack("U", 0xE0184), # VARIATION SELECTOR-149
-    'VS150' => pack("U", 0xE0185), # VARIATION SELECTOR-150
-    'VS151' => pack("U", 0xE0186), # VARIATION SELECTOR-151
-    'VS152' => pack("U", 0xE0187), # VARIATION SELECTOR-152
-    'VS153' => pack("U", 0xE0188), # VARIATION SELECTOR-153
-    'VS154' => pack("U", 0xE0189), # VARIATION SELECTOR-154
-    'VS155' => pack("U", 0xE018A), # VARIATION SELECTOR-155
-    'VS156' => pack("U", 0xE018B), # VARIATION SELECTOR-156
-    'VS157' => pack("U", 0xE018C), # VARIATION SELECTOR-157
-    'VS158' => pack("U", 0xE018D), # VARIATION SELECTOR-158
-    'VS159' => pack("U", 0xE018E), # VARIATION SELECTOR-159
-    'VS160' => pack("U", 0xE018F), # VARIATION SELECTOR-160
-    'VS161' => pack("U", 0xE0190), # VARIATION SELECTOR-161
-    'VS162' => pack("U", 0xE0191), # VARIATION SELECTOR-162
-    'VS163' => pack("U", 0xE0192), # VARIATION SELECTOR-163
-    'VS164' => pack("U", 0xE0193), # VARIATION SELECTOR-164
-    'VS165' => pack("U", 0xE0194), # VARIATION SELECTOR-165
-    'VS166' => pack("U", 0xE0195), # VARIATION SELECTOR-166
-    'VS167' => pack("U", 0xE0196), # VARIATION SELECTOR-167
-    'VS168' => pack("U", 0xE0197), # VARIATION SELECTOR-168
-    'VS169' => pack("U", 0xE0198), # VARIATION SELECTOR-169
-    'VS170' => pack("U", 0xE0199), # VARIATION SELECTOR-170
-    'VS171' => pack("U", 0xE019A), # VARIATION SELECTOR-171
-    'VS172' => pack("U", 0xE019B), # VARIATION SELECTOR-172
-    'VS173' => pack("U", 0xE019C), # VARIATION SELECTOR-173
-    'VS174' => pack("U", 0xE019D), # VARIATION SELECTOR-174
-    'VS175' => pack("U", 0xE019E), # VARIATION SELECTOR-175
-    'VS176' => pack("U", 0xE019F), # VARIATION SELECTOR-176
-    'VS177' => pack("U", 0xE01A0), # VARIATION SELECTOR-177
-    'VS178' => pack("U", 0xE01A1), # VARIATION SELECTOR-178
-    'VS179' => pack("U", 0xE01A2), # VARIATION SELECTOR-179
-    'VS180' => pack("U", 0xE01A3), # VARIATION SELECTOR-180
-    'VS181' => pack("U", 0xE01A4), # VARIATION SELECTOR-181
-    'VS182' => pack("U", 0xE01A5), # VARIATION SELECTOR-182
-    'VS183' => pack("U", 0xE01A6), # VARIATION SELECTOR-183
-    'VS184' => pack("U", 0xE01A7), # VARIATION SELECTOR-184
-    'VS185' => pack("U", 0xE01A8), # VARIATION SELECTOR-185
-    'VS186' => pack("U", 0xE01A9), # VARIATION SELECTOR-186
-    'VS187' => pack("U", 0xE01AA), # VARIATION SELECTOR-187
-    'VS188' => pack("U", 0xE01AB), # VARIATION SELECTOR-188
-    'VS189' => pack("U", 0xE01AC), # VARIATION SELECTOR-189
-    'VS190' => pack("U", 0xE01AD), # VARIATION SELECTOR-190
-    'VS191' => pack("U", 0xE01AE), # VARIATION SELECTOR-191
-    'VS192' => pack("U", 0xE01AF), # VARIATION SELECTOR-192
-    'VS193' => pack("U", 0xE01B0), # VARIATION SELECTOR-193
-    'VS194' => pack("U", 0xE01B1), # VARIATION SELECTOR-194
-    'VS195' => pack("U", 0xE01B2), # VARIATION SELECTOR-195
-    'VS196' => pack("U", 0xE01B3), # VARIATION SELECTOR-196
-    'VS197' => pack("U", 0xE01B4), # VARIATION SELECTOR-197
-    'VS198' => pack("U", 0xE01B5), # VARIATION SELECTOR-198
-    'VS199' => pack("U", 0xE01B6), # VARIATION SELECTOR-199
-    'VS200' => pack("U", 0xE01B7), # VARIATION SELECTOR-200
-    'VS201' => pack("U", 0xE01B8), # VARIATION SELECTOR-201
-    'VS202' => pack("U", 0xE01B9), # VARIATION SELECTOR-202
-    'VS203' => pack("U", 0xE01BA), # VARIATION SELECTOR-203
-    'VS204' => pack("U", 0xE01BB), # VARIATION SELECTOR-204
-    'VS205' => pack("U", 0xE01BC), # VARIATION SELECTOR-205
-    'VS206' => pack("U", 0xE01BD), # VARIATION SELECTOR-206
-    'VS207' => pack("U", 0xE01BE), # VARIATION SELECTOR-207
-    'VS208' => pack("U", 0xE01BF), # VARIATION SELECTOR-208
-    'VS209' => pack("U", 0xE01C0), # VARIATION SELECTOR-209
-    'VS210' => pack("U", 0xE01C1), # VARIATION SELECTOR-210
-    'VS211' => pack("U", 0xE01C2), # VARIATION SELECTOR-211
-    'VS212' => pack("U", 0xE01C3), # VARIATION SELECTOR-212
-    'VS213' => pack("U", 0xE01C4), # VARIATION SELECTOR-213
-    'VS214' => pack("U", 0xE01C5), # VARIATION SELECTOR-214
-    'VS215' => pack("U", 0xE01C6), # VARIATION SELECTOR-215
-    'VS216' => pack("U", 0xE01C7), # VARIATION SELECTOR-216
-    'VS217' => pack("U", 0xE01C8), # VARIATION SELECTOR-217
-    'VS218' => pack("U", 0xE01C9), # VARIATION SELECTOR-218
-    'VS219' => pack("U", 0xE01CA), # VARIATION SELECTOR-219
-    'VS220' => pack("U", 0xE01CB), # VARIATION SELECTOR-220
-    'VS221' => pack("U", 0xE01CC), # VARIATION SELECTOR-221
-    'VS222' => pack("U", 0xE01CD), # VARIATION SELECTOR-222
-    'VS223' => pack("U", 0xE01CE), # VARIATION SELECTOR-223
-    'VS224' => pack("U", 0xE01CF), # VARIATION SELECTOR-224
-    'VS225' => pack("U", 0xE01D0), # VARIATION SELECTOR-225
-    'VS226' => pack("U", 0xE01D1), # VARIATION SELECTOR-226
-    'VS227' => pack("U", 0xE01D2), # VARIATION SELECTOR-227
-    'VS228' => pack("U", 0xE01D3), # VARIATION SELECTOR-228
-    'VS229' => pack("U", 0xE01D4), # VARIATION SELECTOR-229
-    'VS230' => pack("U", 0xE01D5), # VARIATION SELECTOR-230
-    'VS231' => pack("U", 0xE01D6), # VARIATION SELECTOR-231
-    'VS232' => pack("U", 0xE01D7), # VARIATION SELECTOR-232
-    'VS233' => pack("U", 0xE01D8), # VARIATION SELECTOR-233
-    'VS234' => pack("U", 0xE01D9), # VARIATION SELECTOR-234
-    'VS235' => pack("U", 0xE01DA), # VARIATION SELECTOR-235
-    'VS236' => pack("U", 0xE01DB), # VARIATION SELECTOR-236
-    'VS237' => pack("U", 0xE01DC), # VARIATION SELECTOR-237
-    'VS238' => pack("U", 0xE01DD), # VARIATION SELECTOR-238
-    'VS239' => pack("U", 0xE01DE), # VARIATION SELECTOR-239
-    'VS240' => pack("U", 0xE01DF), # VARIATION SELECTOR-240
-    'VS241' => pack("U", 0xE01E0), # VARIATION SELECTOR-241
-    'VS242' => pack("U", 0xE01E1), # VARIATION SELECTOR-242
-    'VS243' => pack("U", 0xE01E2), # VARIATION SELECTOR-243
-    'VS244' => pack("U", 0xE01E3), # VARIATION SELECTOR-244
-    'VS245' => pack("U", 0xE01E4), # VARIATION SELECTOR-245
-    'VS246' => pack("U", 0xE01E5), # VARIATION SELECTOR-246
-    'VS247' => pack("U", 0xE01E6), # VARIATION SELECTOR-247
-    'VS248' => pack("U", 0xE01E7), # VARIATION SELECTOR-248
-    'VS249' => pack("U", 0xE01E8), # VARIATION SELECTOR-249
-    'VS250' => pack("U", 0xE01E9), # VARIATION SELECTOR-250
-    'VS251' => pack("U", 0xE01EA), # VARIATION SELECTOR-251
-    'VS252' => pack("U", 0xE01EB), # VARIATION SELECTOR-252
-    'VS253' => pack("U", 0xE01EC), # VARIATION SELECTOR-253
-    'VS254' => pack("U", 0xE01ED), # VARIATION SELECTOR-254
-    'VS255' => pack("U", 0xE01EE), # VARIATION SELECTOR-255
-    'VS256' => pack("U", 0xE01EF), # VARIATION SELECTOR-256
-    'WJ'    => pack("U", 0x2060), # WORD JOINER
-    'ZWJ'   => pack("U", 0x200D), # ZERO WIDTH JOINER
-    'ZWNJ'  => pack("U", 0x200C), # ZERO WIDTH NON-JOINER
-    'ZWSP'  => pack("U", 0x200B), # ZERO WIDTH SPACE
-);
-
-my %deprecated_aliases = (
-    # Pre-3.2 compatibility (only for the first 256 characters).
-    # Use of these gives deprecated message.
-    'HORIZONTAL TABULATION' => pack("U", 0x09), # CHARACTER TABULATION
-    'VERTICAL TABULATION'   => pack("U", 0x0B), # LINE TABULATION
-    'FILE SEPARATOR'        => pack("U", 0x1C), # INFORMATION SEPARATOR FOUR
-    'GROUP SEPARATOR'       => pack("U", 0x1D), # INFORMATION SEPARATOR THREE
-    'RECORD SEPARATOR'      => pack("U", 0x1E), # INFORMATION SEPARATOR TWO
-    'UNIT SEPARATOR'        => pack("U", 0x1F), # INFORMATION SEPARATOR ONE
-    'HORIZONTAL TABULATION SET' => pack("U", 0x88), # CHARACTER TABULATION SET
-    'HORIZONTAL TABULATION WITH JUSTIFICATION' => pack("U", 0x89), # CHARACTER TABULATION WITH JUSTIFICATION
-    'PARTIAL LINE DOWN'       => pack("U", 0x8B), # PARTIAL LINE FORWARD
-    'PARTIAL LINE UP'         => pack("U", 0x8C), # PARTIAL LINE BACKWARD
-    'VERTICAL TABULATION SET' => pack("U", 0x8A), # LINE TABULATION SET
-    'REVERSE INDEX'           => pack("U", 0x8D), # REVERSE LINE FEED
-);
-
-
-my $txt;  # The table of official character names
-
-my %full_names_cache; # Holds already-looked-up names, so don't have to
-# re-look them up again.  The previous versions of charnames had scoping
-# bugs.  For example if we use script A in one scope and find and cache
-# what Z resolves to, we can't use that cache in a different scope that
-# uses script B instead of A, as Z might be an entirely different letter
-# there; or there might be different aliases in effect in different
-# scopes, or :short may be in effect or not effect in different scopes,
-# or various combinations thereof.  This was solved in this version
-# mostly by moving things to %^H.  But some things couldn't be moved
-# there.  One of them was the cache of runtime looked-up names, in part
-# because %^H is read-only at runtime.  I (khw) don't know why the cache
-# was run-time only in the previous versions: perhaps oversight; perhaps
-# that compile time looking doesn't happen in a loop so didn't think it
-# was worthwhile; perhaps not wanting to make the cache too large.  But
-# I decided to make it compile time as well; this could easily be
-# changed.
-# Anyway, this hash is not scoped, and is added to at runtime.  It
-# doesn't have scoping problems because the data in it is restricted to
-# official names, which are always invariant, and we only set it and
-# look at it at during :full lookups, so is unaffected by any other
-# scoped options.  I put this in to maintain parity with the older
-# version.  If desired, a %short_names cache could also be made, as well
-# as one for each script, say in %script_names_cache, with each key
-# being a hash for a script named in a 'use charnames' statement.  I
-# decided not to do that for now, just because it's added complication,
-# and because I'm just trying to maintain parity, not extend it.
-
-# Designed so that test decimal first, and then hex.  Leading zeros
-# imply non-decimal, as do non-[0-9]
-my $decimal_qr = qr/^[1-9]\d*$/;
-
-# Returns the hex number in $1.
-my $hex_qr = qr/^(?:[Uu]\+|0[xX])?([[:xdigit:]]+)$/;
-
-sub croak
-{
-  require Carp; goto &Carp::croak;
-} # croak
-
-sub carp
-{
-  require Carp; goto &Carp::carp;
-} # carp
-
-sub alias (@) # Set up a single alias
-{
-  my $alias = ref $_[0] ? $_[0] : { @_ };
-  foreach my $name (keys %$alias) {
-    my $value = $alias->{$name};
-    next unless defined $value;          # Omit if screwed up.
-
-    # Is slightly slower to just after this statement see if it is
-    # decimal, since we already know it is after having converted from
-    # hex, but makes the code easier to maintain, and is called
-    # infrequently, only at compile-time
-    if ($value !~ $decimal_qr && $value =~ $hex_qr) {
-      $value = CORE::hex $1;
-    }
-    if ($value =~ $decimal_qr) {
-        no warnings 'utf8'; # Allow even illegal characters
-        $^H{charnames_ord_aliases}{$name} = pack("U", $value);
-
-        # Use a canonical form.
-        $^H{charnames_inverse_ords}{sprintf("%05X", $value)} = $name;
-    }
-    else {
-        # XXX validate syntax when deprecation cycle complete. ie. start
-        # with an alpha only, etc.
-        $^H{charnames_name_aliases}{$name} = $value;
-    }
-  }
-} # alias
-
-sub not_legal_use_bytes_msg {
-  my ($name, $utf8) = @_;
-  my $return;
-
-  if (length($utf8) == 1) {
-    $return = sprintf("Character 0x%04x with name '%s' is", ord $utf8, $name);
-  } else {
-    $return = sprintf("String with name '%s' (and ordinals %s) contains character(s)", $name, join(" ", map { sprintf "0x%04X", ord $_ } split(//, $utf8)));
-  }
-  return $return . " above 0xFF with 'use bytes' in effect";
-}
-
-sub alias_file ($)  # Reads a file containing alias definitions
-{
-  my ($arg, $file) = @_;
-  if (-f $arg && File::Spec->file_name_is_absolute ($arg)) {
-    $file = $arg;
-  }
-  elsif ($arg =~ m/^\w+$/) {
-    $file = "unicore/${arg}_alias.pl";
-  }
-  else {
-    croak "Charnames alias files can only have identifier characters";
-  }
-  if (my @alias = do $file) {
-    @alias == 1 && !defined $alias[0] and
-      croak "$file cannot be used as alias file for charnames";
-    @alias % 2 and
-      croak "$file did not return a (valid) list of alias pairs";
-    alias (@alias);
-    return (1);
-  }
-  0;
-} # alias_file
-
-# For use when don't import anything.  This structure must be kept in
-# sync with the one that import() fills up.
-my %dummy_H = (
-                charnames_stringified_names => "",
-                charnames_stringified_ords => "",
-                charnames_scripts => "",
-                charnames_full => 1,
-                charnames_short => 0,
-              );
-
-
-sub lookup_name ($$$) {
-  my ($name, $wants_ord, $runtime) = @_;
-
-  # Lookup the name or sequence $name in the tables.  If $wants_ord is false,
-  # returns the string equivalent of $name; if true, returns the ordinal value
-  # instead, but in this case $name must not be a sequence; otherwise undef is
-  # returned and a warning raised.  $runtime is 0 if compiletime, otherwise
-  # gives the number of stack frames to go back to get the application caller
-  # info.
-  # If $name is not found, returns undef in runtime with no warning; and in
-  # compiletime, the Unicode replacement character, with a warning.
-
-  # It looks first in the aliases, then in the large table of official Unicode
-  # names.
-
-  my $utf8;       # The string result
-  my $save_input;
-
-  if ($runtime) {
-
-    my $hints_ref = (caller($runtime))[10];
-
-    # If we didn't import anything (which happens with 'use charnames ()',
-    # substitute a dummy structure.
-    $hints_ref = \%dummy_H if ! defined $hints_ref
-                              || ! defined $hints_ref->{charnames_full};
-
-    # At runtime, but currently not at compile time, $^H gets
-    # stringified, so un-stringify back to the original data structures.
-    # These get thrown away by perl before the next invocation
-    # Also fill in the hash with the non-stringified data.
-    # N.B.  New fields must be also added to %dummy_H
-
-    %{$^H{charnames_name_aliases}} = split ',',
-                                      $hints_ref->{charnames_stringified_names};
-    %{$^H{charnames_ord_aliases}} = split ',',
-                                      $hints_ref->{charnames_stringified_ords};
-    $^H{charnames_scripts} = $hints_ref->{charnames_scripts};
-    $^H{charnames_full} = $hints_ref->{charnames_full};
-    $^H{charnames_short} = $hints_ref->{charnames_short};
-  }
-
-  # User alias should be checked first or else can't override ours, and if we
-  # were to add any, could conflict with theirs.
-  if (exists $^H{charnames_ord_aliases}{$name}) {
-    $utf8 = $^H{charnames_ord_aliases}{$name};
-  }
-  elsif (exists $^H{charnames_name_aliases}{$name}) {
-    $name = $^H{charnames_name_aliases}{$name};
-    $save_input = $name;  # Cache the result for any error message
-  }
-  elsif (exists $system_aliases{$name}) {
-    $utf8 = $system_aliases{$name};
-  }
-  elsif (exists $deprecated_aliases{$name}) {
-    require warnings;
-    warnings::warnif('deprecated', "Unicode character name \"$name\" is deprecated, use \"" . viacode(ord $deprecated_aliases{$name}) . "\" instead");
-    $utf8 = $deprecated_aliases{$name};
-  }
-
-  my @off;
+# Translate between Unicode character names and their code points.
+# This is a wrapper around the submodule C<_charnames>.  This design allows
+# C<_charnames> to be autoloaded to enable use of \N{...}, but requires this
+# module to be explicitly requested for the functions API.
 
 
-  if (! defined $utf8) {
-
-    # See if has looked this input up earlier.
-    if ($^H{charnames_full} && exists $full_names_cache{$name}) {
-      $utf8 = $full_names_cache{$name};
-    }
-    else {
-
-      ## Suck in the code/name list as a big string.
-      ## Lines look like:
-      ##     "00052\tLATIN CAPITAL LETTER R\n"
-      # or
-      #      "0052 0303\tLATIN CAPITAL LETTER R WITH TILDE\n"
-      $txt = do "unicore/Name.pl" unless $txt;
-
-      ## @off will hold the index into the code/name string of the start and
-      ## end of the name as we find it.
-
-      ## If :full, look for the name exactly; runtime implies full
-      my $found_full_in_table = 0;  # Tells us if can cache the result
-      if ($^H{charnames_full}) {
-
-        # See if the name is one which is algorithmically determinable.
-        # The subroutine is included in Name.pl.  The table contained in
-        # $txt doesn't contain these.  Experiments show that checking
-        # for these before checking for the regular names has no
-        # noticeable impact on performance for the regular names, but
-        # the other way around slows down finding these immensely.
-        # Algorithmically determinables are not placed in the cache (that
-        # $found_full_in_table indicates) because that uses up memory,
-        # and finding these again is fast.
-        if (defined (my $ord = name_to_code_point_special($name))) {
-          $utf8 = pack("U", $ord);
-        }
-        else {
-
-          # Not algorthmically determinable; look up in the table.
-          if ($txt =~ /\t\Q$name\E$/m) {
-            @off = ($-[0] + 1, $+[0]);    # The 1 is for the tab
-            $found_full_in_table = 1;
-          }
-        }
-      }
-
-      # If we didn't get it above, keep looking
-      if (! $found_full_in_table && ! defined $utf8) {
-
-        # If :short is allowed, see if input is like "greek:Sigma".
-        my $scripts_trie;
-        if (($^H{charnames_short})
-            && $name =~ /^ \s* (.+?) \s* : \s* (.+?) \s* $ /xs)
-        {
-            $scripts_trie = "\U\Q$1";
-            $name = $2;
-        }
-        else { # Otherwise look in allowed scripts
-            $scripts_trie = $^H{charnames_scripts};
-        }
-
-        my $case = $name =~ /[[:upper:]]/ ? "CAPITAL" : "SMALL";
-        if ($txt !~
-            /\t (?: $scripts_trie ) \ (?:$case\ )? LETTER \ \U\Q$name\E $/xm)
-        {
-          # Here we still don't have it, give up.
-          return if $runtime;
-
-          # May have zapped input name, get it again.
-          $name = (defined $save_input) ? $save_input : $_[0];
-          carp "Unknown charname '$name'";
-          return ($wants_ord) ? 0xFFFD : pack("U", 0xFFFD);
-        }
-
-        @off = ($-[0] + 1, $+[0]);  # The 1 is for the tab
-      }
-
-      if (! defined $utf8) {
-
-        # Here, we haven't set up the output, but we know where in the string
-        # the name starts.  The string is set up so that for single characters
-        # (and not named sequences), the name is preceeded immediately by a
-        # tab and 5 hex digits for its code, with a \n before those.  Named
-        # sequences won't have the 7th preceeding character be a \n.
-        # (Actually, for the very first entry in the table this isn't strictly
-        # true: subtracting 7 will yield -1, and the substr below will
-        # therefore yield the very last character in the table, which should
-        # also be a \n, so the statement works anyway.)
-        if (substr($txt, $off[0] - 7, 1) eq "\n") {
-          $utf8 = pack("U", CORE::hex substr($txt, $off[0] - 6, 5));
-        }
-        else {
-
-          # Here, is a named sequence.  Need to go looking for the beginning,
-          # which is just after the \n from the previous entry in the table.
-          # The +1 skips past that newline, or, if the rindex() fails, to put
-          # us to an offset of zero.
-          my $charstart = rindex($txt, "\n", $off[0] - 7) + 1;
-          $utf8 = pack("U*", map { CORE::hex }
-              split " ", substr($txt, $charstart, $off[0] - $charstart - 1));
-        }
-      }
-
-      # Cache the input so as to not have to search the large table
-      # again, but only if it came from the one search that we cache.
-      $full_names_cache{$name} = $utf8 if $found_full_in_table;
-    }
-  }
-
-
-  # Here, have the utf8.  If the return is to be an ord, must be any single
-  # character.
-  if ($wants_ord) {
-    return ord($utf8) if length $utf8 == 1;
-  }
-  else {
-
-    # Here, wants string output.  If utf8 is acceptable, just return what
-    # we've got; otherwise attempt to convert it to non-utf8 and return that.
-    my $in_bytes = ($runtime)
-                   ? (caller $runtime)[8] & $bytes::hint_bits
-                   : $^H & $bytes::hint_bits;
-    return $utf8 if (! $in_bytes || utf8::downgrade($utf8, 1)) # The 1 arg
-                                                  # means don't die on failure
-  }
-
-  # Here, there is an error:  either there are too many characters, or the
-  # result string needs to be non-utf8, and at least one character requires
-  # utf8.  Prefer any official name over the input one for the error message.
-  if (@off) {
-    $name = substr($txt, $off[0], $off[1] - $off[0]) if @off;
-  }
-  else {
-    $name = (defined $save_input) ? $save_input : $_[0];
-  }
-
-  if ($wants_ord) {
-    # Only way to get here in this case is if result too long.  Message
-    # assumes that our only caller that requires single char result is
-    # vianame.
-    carp "charnames::vianame() doesn't handle named sequences ($name).  Use charnames::string_vianame() instead";
-    return;
-  }
-
-  # Only other possible failure here is from use bytes.
-  if ($runtime) {
-    carp not_legal_use_bytes_msg($name, $utf8);
-    return;
-  } else {
-    croak not_legal_use_bytes_msg($name, $utf8);
-  }
-
-} # lookup_name
-
-sub charnames {
-
-  # For \N{...}.  Looks up the character name and returns the string
-  # representation of it.
-
-  # The first 0 arg means wants a string returned; the second that we are in
-  # compile time
-  return lookup_name($_[0], 0, 0);
-}
+$Carp::Internal{ (__PACKAGE__) } = 1;
 
 sub import
 {
   shift; ## ignore class name
 
 sub import
 {
   shift; ## ignore class name
-
-  if (not @_) {
-    carp("`use charnames' needs explicit imports list");
-  }
-  $^H{charnames} = \&charnames ;
-  $^H{charnames_ord_aliases} = {};
-  $^H{charnames_name_aliases} = {};
-  $^H{charnames_inverse_ords} = {};
-  # New fields must be added to %dummy_H, and the code in lookup_name()
-  # that copies fields from the runtime structure
-
-  ##
-  ## fill %h keys with our @_ args.
-  ##
-  my ($promote, %h, @args) = (0);
-  while (my $arg = shift) {
-    if ($arg eq ":alias") {
-      @_ or
-        croak ":alias needs an argument in charnames";
-      my $alias = shift;
-      if (ref $alias) {
-        ref $alias eq "HASH" or
-          croak "Only HASH reference supported as argument to :alias";
-        alias ($alias);
-        next;
-      }
-      if ($alias =~ m{:(\w+)$}) {
-        $1 eq "full" || $1 eq "short" and
-          croak ":alias cannot use existing pragma :$1 (reversed order?)";
-        alias_file ($1) and $promote = 1;
-        next;
-      }
-      alias_file ($alias);
-      next;
-    }
-    if (substr($arg, 0, 1) eq ':' and ! ($arg eq ":full" || $arg eq ":short")) {
-      warn "unsupported special '$arg' in charnames";
-      next;
-    }
-    push @args, $arg;
-  }
-  @args == 0 && $promote and @args = (":full");
-  @h{@args} = (1) x @args;
-
-  $^H{charnames_full} = delete $h{':full'} || 0;  # Don't leave undefined,
-                                                  # as tested for in
-                                                  # lookup_names
-  $^H{charnames_short} = delete $h{':short'} || 0;
-  my @scripts = map uc, keys %h;
-
-  ##
-  ## If utf8? warnings are enabled, and some scripts were given,
-  ## see if at least we can find one letter from each script.
-  ##
-  if (warnings::enabled('utf8') && @scripts) {
-    $txt = do "unicore/Name.pl" unless $txt;
-
-    for my $script (@scripts) {
-      if (not $txt =~ m/\t$script (?:CAPITAL |SMALL )?LETTER /) {
-        warnings::warn('utf8',  "No such script: '$script'");
-        $script = quotemeta $script;  # Escape it, for use in the re.
-      }
-    }
-  }
-
-  # %^H gets stringified, so serialize it ourselves so can extract the
-  # real data back later.
-  $^H{charnames_stringified_ords} = join ",", %{$^H{charnames_ord_aliases}};
-  $^H{charnames_stringified_names} = join ",", %{$^H{charnames_name_aliases}};
-  $^H{charnames_stringified_inverse_ords} = join ",", %{$^H{charnames_inverse_ords}};
-  $^H{charnames_scripts} = join "|", @scripts;  # Stringifiy them as a trie
-} # import
+  _charnames->import(@_);
+}
 
 # Cache of already looked-up values.  This is set to only contain
 # official values, and user aliases can't override them, so scoping is
 
 # Cache of already looked-up values.  This is set to only contain
 # official values, and user aliases can't override them, so scoping is
@@ -833,81 +27,13 @@ sub import
 my %viacode;
 
 sub viacode {
 my %viacode;
 
 sub viacode {
-
-  # Returns the name of the code point argument
-
-  if (@_ != 1) {
-    carp "charnames::viacode() expects one argument";
-    return;
-  }
-
-  my $arg = shift;
-
-  # This is derived from Unicode::UCD, where it is nearly the same as the
-  # function _getcode(), but here it makes sure that even a hex argument
-  # has the proper number of leading zeros, which is critical in
-  # matching against $txt below
-  # Must check if decimal first; see comments at that definition
-  my $hex;
-  if ($arg =~ $decimal_qr) {
-    $hex = sprintf "%05X", $arg;
-  } elsif ($arg =~ $hex_qr) {
-    # Below is the line that differs from the _getcode() source
-    $hex = sprintf "%05X", hex $1;
-  } else {
-    carp("unexpected arg \"$arg\" to charnames::viacode()");
-    return;
-  }
-
-  return $viacode{$hex} if exists $viacode{$hex};
-
-  # If the code point is above the max in the table, there's no point
-  # looking through it.  Checking the length first is slightly faster
-  if (length($hex) <= 5 || CORE::hex($hex) <= 0x10FFFF) {
-    $txt = do "unicore/Name.pl" unless $txt;
-
-    # See if the name is algorithmically determinable.
-    my $algorithmic = code_point_to_name_special(CORE::hex $hex);
-    if (defined $algorithmic) {
-      $viacode{$hex} = $algorithmic;
-      return $algorithmic;
-    }
-
-    # Return the official name, if exists.  It's unclear to me (khw) at
-    # this juncture if it is better to return a user-defined override, so
-    # leaving it as is for now.
-    if ($txt =~ m/^$hex\t/m) {
-
-        # The name starts with the next character and goes up to the
-        # next new-line.  Using capturing parentheses above instead of
-        # @+ more than doubles the execution time in Perl 5.13
-        $viacode{$hex} = substr($txt, $+[0], index($txt, "\n", $+[0]) - $+[0]);
-        return $viacode{$hex};
-    }
-  }
-
-  # See if there is a user name for it, before giving up completely.
-  # First get the scoped aliases, give up if have none.
-  my $H_ref = (caller(0))[10];
-  return if ! defined $H_ref
-            || ! exists $H_ref->{charnames_stringified_inverse_ords};
-
-  my %code_point_aliases = split ',',
-                          $H_ref->{charnames_stringified_inverse_ords};
-  if (! exists $code_point_aliases{$hex}) {
-    if (CORE::hex($hex) > 0x10FFFF) {
-        carp "Unicode characters only allocated up to U+10FFFF (you asked for U+$hex)";
-    }
-    return;
-  }
-
-  return $code_point_aliases{$hex};
-} # viacode
+  return _charnames::viacode(@_);
+}
 
 sub vianame
 {
   if (@_ != 1) {
 
 sub vianame
 {
   if (@_ != 1) {
-    carp "charnames::vianame() expects one name argument";
+    _charnames::carp "charnames::vianame() expects one name argument";
     return ()
   }
 
     return ()
   }
 
@@ -924,13 +50,13 @@ sub vianame
     # string_vianame() instead.
     my $ord = CORE::hex $1;
     return chr $ord if $ord <= 255 || ! ((caller 0)[8] & $bytes::hint_bits);
     # string_vianame() instead.
     my $ord = CORE::hex $1;
     return chr $ord if $ord <= 255 || ! ((caller 0)[8] & $bytes::hint_bits);
-    carp not_legal_use_bytes_msg($arg, chr $ord);
+    _charnames::carp _charnames::not_legal_use_bytes_msg($arg, chr $ord);
     return;
   }
 
   # The first 1 arg means wants an ord returned; the second that we are in
   # runtime, and this is the first level routine called from the user
     return;
   }
 
   # The first 1 arg means wants an ord returned; the second that we are in
   # runtime, and this is the first level routine called from the user
-  return lookup_name($arg, 1, 1);
+  return _charnames::lookup_name($arg, 1, 1);
 } # vianame
 
 sub string_vianame {
 } # vianame
 
 sub string_vianame {
@@ -939,7 +65,7 @@ sub string_vianame {
   # found, undef otherwise.
 
   if (@_ != 1) {
   # found, undef otherwise.
 
   if (@_ != 1) {
-    carp "charnames::string_vianame() expects one name argument";
+    _charnames::carp "charnames::string_vianame() expects one name argument";
     return;
   }
 
     return;
   }
 
@@ -950,17 +76,15 @@ sub string_vianame {
     my $ord = CORE::hex $1;
     return chr $ord if $ord <= 255 || ! ((caller 0)[8] & $bytes::hint_bits);
 
     my $ord = CORE::hex $1;
     return chr $ord if $ord <= 255 || ! ((caller 0)[8] & $bytes::hint_bits);
 
-    carp not_legal_use_bytes_msg($arg, chr $ord);
+    _charnames::carp _charnames::not_legal_use_bytes_msg($arg, chr $ord);
     return;
   }
 
   # The 0 arg means wants a string returned; the 1 arg means that we are in
   # runtime, and this is the first level routine called from the user
     return;
   }
 
   # The 0 arg means wants a string returned; the 1 arg means that we are in
   # runtime, and this is the first level routine called from the user
-  return lookup_name($arg, 0, 1);
+  return _charnames::lookup_name($arg, 0, 1);
 } # string_vianame
 
 } # string_vianame
 
-
-
 1;
 __END__
 
 1;
 __END__
 
@@ -975,6 +99,11 @@ charnames - access to Unicode character names and named character sequences; als
  print "\N{LATIN CAPITAL LETTER E WITH VERTICAL LINE BELOW}",
        " is an officially named sequence of two Unicode characters\n";
 
  print "\N{LATIN CAPITAL LETTER E WITH VERTICAL LINE BELOW}",
        " is an officially named sequence of two Unicode characters\n";
 
+ use charnames ':loose';
+ print "\N{Greek small-letter  sigma}",
+        "can be used to ignore case, underscores, most blanks,"
+        "and when you aren't sure if the official name has hyphens\n";
+
  use charnames ':short';
  print "\N{greek:Sigma} is an upper-case sigma.\n";
 
  use charnames ':short';
  print "\N{greek:Sigma} is an upper-case sigma.\n";
 
@@ -986,7 +115,7 @@ charnames - access to Unicode character names and named character sequences; als
    mychar => 0xE8000,  # Private use area
  };
  print "\N{e_ACUTE} is a small letter e with an acute.\n";
    mychar => 0xE8000,  # Private use area
  };
  print "\N{e_ACUTE} is a small letter e with an acute.\n";
- print "\\N{mychar} allows me to name private use characters.\n";
+ print "\N{mychar} allows me to name private use characters.\n";
 
  use charnames ();
  print charnames::viacode(0x1234); # prints "ETHIOPIC SYLLABLE SEE"
 
  use charnames ();
  print charnames::viacode(0x1234); # prints "ETHIOPIC SYLLABLE SEE"
@@ -1026,42 +155,55 @@ Unicode name.
 
 =back
 
 
 =back
 
-All forms other than C<S<"use charnames ();">> also enable the use of
-C<\N{I<CHARNAME>}> sequences to compile a Unicode character into a
-string, based on its name.
+Starting in Perl v5.16, any occurrence of C<\N{I<CHARNAME>}> sequences
+in a double-quotish string automatically loads this module with arguments
+C<:full> and C<:short> (described below) if it hasn't already been loaded with
+different arguments, in order to compile the named Unicode character into
+position in the string.  Prior to v5.16, an explicit S<C<use charnames>> was
+required to enable this usage.  (However, prior to v5.16, the form C<S<"use
+charnames ();">> did not enable C<\N{I<CHARNAME>}>.)
 
 Note that C<\N{U+I<...>}>, where the I<...> is a hexadecimal number,
 
 Note that C<\N{U+I<...>}>, where the I<...> is a hexadecimal number,
-also inserts a character into a string, but doesn't require the use of
-this pragma.  The character it inserts is the one whose code point
+also inserts a character into a string.
+The character it inserts is the one whose code point
 (ordinal value) is equal to the number.  For example, C<"\N{U+263a}"> is
 (ordinal value) is equal to the number.  For example, C<"\N{U+263a}"> is
-the Unicode (white background, black foreground) smiley face; it doesn't
-require this pragma, whereas the equivalent, C<"\N{WHITE SMILING FACE}">
-does.
-Also, C<\N{I<...>}> can mean a regex quantifier instead of a character
+the Unicode (white background, black foreground) smiley face
+equivalent to C<"\N{WHITE SMILING FACE}">.
+Also note, C<\N{I<...>}> can mean a regex quantifier instead of a character
 name, when the I<...> is a number (or comma separated pair of numbers
 (see L<perlreref/QUANTIFIERS>), and is not related to this pragma.
 
 name, when the I<...> is a number (or comma separated pair of numbers
 (see L<perlreref/QUANTIFIERS>), and is not related to this pragma.
 
-The C<charnames> pragma supports arguments C<:full>, C<:short>, script
-names and customized aliases.  If C<:full> is present, for expansion of
+The C<charnames> pragma supports arguments C<:full>, C<:loose>, C<:short>,
+script names and L<customized aliases|/CUSTOM ALIASES>.
+
+If C<:full> is present, for expansion of
 C<\N{I<CHARNAME>}>, the string I<CHARNAME> is first looked up in the list of
 C<\N{I<CHARNAME>}>, the string I<CHARNAME> is first looked up in the list of
-standard Unicode character names.  If C<:short> is present, and
+standard Unicode character names.
+
+C<:loose> is a variant of C<:full> which allows I<CHARNAME> to be less
+precisely specified.  Details are in L</LOOSE MATCHES>.
+
+If C<:short> is present, and
 I<CHARNAME> has the form C<I<SCRIPT>:I<CNAME>>, then I<CNAME> is looked up
 I<CHARNAME> has the form C<I<SCRIPT>:I<CNAME>>, then I<CNAME> is looked up
-as a letter in script I<SCRIPT>.  If C<use charnames> is used
+as a letter in script I<SCRIPT>, as described in the next paragraph.
+Or, if C<use charnames> is used
 with script name arguments, then for C<\N{I<CHARNAME>}> the name
 I<CHARNAME> is looked up as a letter in the given scripts (in the
 specified order). Customized aliases can override these, and are explained in
 L</CUSTOM ALIASES>.
 
 with script name arguments, then for C<\N{I<CHARNAME>}> the name
 I<CHARNAME> is looked up as a letter in the given scripts (in the
 specified order). Customized aliases can override these, and are explained in
 L</CUSTOM ALIASES>.
 
-For lookup of I<CHARNAME> inside a given script I<SCRIPTNAME>
-this pragma looks for the names
+For lookup of I<CHARNAME> inside a given script I<SCRIPTNAME>,
+this pragma looks in the table of standard Unicode names for the names
 
   SCRIPTNAME CAPITAL LETTER CHARNAME
   SCRIPTNAME SMALL LETTER CHARNAME
   SCRIPTNAME LETTER CHARNAME
 
 
   SCRIPTNAME CAPITAL LETTER CHARNAME
   SCRIPTNAME SMALL LETTER CHARNAME
   SCRIPTNAME LETTER CHARNAME
 
-in the table of standard Unicode names.  If I<CHARNAME> is lowercase,
+If I<CHARNAME> is all lowercase,
 then the C<CAPITAL> variant is ignored, otherwise the C<SMALL> variant
 then the C<CAPITAL> variant is ignored, otherwise the C<SMALL> variant
-is ignored.
+is ignored, and both I<CHARNAME> and I<SCRIPTNAME> are converted to all
+uppercase for look-up.  Other than that, both of them follow L<loose|/LOOSE
+MATCHES> rules if C<:loose> is also specified; strict otherwise.
 
 Note that C<\N{...}> is compile-time; it's a special form of string
 constant used inside double-quotish strings; this means that you cannot
 
 Note that C<\N{...}> is compile-time; it's a special form of string
 constant used inside double-quotish strings; this means that you cannot
@@ -1069,14 +211,11 @@ use variables inside the C<\N{...}>.  If you want similar run-time
 functionality, use
 L<charnames::string_vianame()|/charnames::string_vianame(I<name>)>.
 
 functionality, use
 L<charnames::string_vianame()|/charnames::string_vianame(I<name>)>.
 
-For the C0 and C1 control characters (U+0000..U+001F, U+0080..U+009F)
-there are no official Unicode names but you can use instead the ISO 6429
-names (LINE FEED, ESCAPE, and so forth, and their abbreviations, LF,
-ESC, ...).  In Unicode 3.2 (as of Perl 5.8) some naming changes took
-place, and ISO 6429 was updated, see L</ALIASES>.
+Note, starting in Perl 5.18, the name C<BELL> refers to the Unicode character
+U+1F514, instead of the traditional U+0007.  For the latter, use C<ALERT>
+or C<BEL>.
 
 
-If the input name is unknown, C<\N{NAME}> raises a warning and
-substitutes the Unicode REPLACEMENT CHARACTER (U+FFFD).
+It is a syntax error to use C<\N{NAME}> where C<NAME> is unknown.
 
 For C<\N{NAME}>, it is a fatal error if C<use bytes> is in effect and the
 input name is that of a character that won't fit into a byte (i.e., whose
 
 For C<\N{NAME}>, it is a fatal error if C<use bytes> is in effect and the
 input name is that of a character that won't fit into a byte (i.e., whose
@@ -1086,106 +225,43 @@ Otherwise, any string that includes a C<\N{I<charname>}> or
 C<S<\N{U+I<code point>}>> will automatically have Unicode semantics (see
 L<perlunicode/Byte and Character Semantics>).
 
 C<S<\N{U+I<code point>}>> will automatically have Unicode semantics (see
 L<perlunicode/Byte and Character Semantics>).
 
+=head1 LOOSE MATCHES
+
+By specifying C<:loose>, Unicode's L<loose character name
+matching|http://www.unicode.org/reports/tr44#Matching_Rules> rules are
+selected instead of the strict exact match used otherwise.
+That means that I<CHARNAME> doesn't have to be so precisely specified.
+Upper/lower case doesn't matter (except with scripts as mentioned above), nor
+do any underscores, and the only hyphens that matter are those at the
+beginning or end of a word in the name (with one exception:  the hyphen in
+U+1180 C<HANGUL JUNGSEONG O-E> does matter).
+Also, blanks not adjacent to hyphens don't matter.
+The official Unicode names are quite variable as to where they use hyphens
+versus spaces to separate word-like units, and this option allows you to not
+have to care as much.
+The reason non-medial hyphens matter is because of cases like
+U+0F60 C<TIBETAN LETTER -A> versus U+0F68 C<TIBETAN LETTER A>.
+The hyphen here is significant, as is the space before it, and so both must be
+included.
+
+C<:loose> slows down look-ups by a factor of 2 to 3 versus
+C<:full>, but the trade-off may be worth it to you.  Each individual look-up
+takes very little time, and the results are cached, so the speed difference
+would become a factor only in programs that do look-ups of many different
+spellings, and probably only when those look-ups are through C<vianame()> and
+C<string_vianame()>, since C<\N{...}> look-ups are done at compile time.
+
 =head1 ALIASES
 
 =head1 ALIASES
 
-A few aliases have been defined for convenience: instead of having
-to use the official names
-
-    LINE FEED (LF)
-    FORM FEED (FF)
-    CARRIAGE RETURN (CR)
-    NEXT LINE (NEL)
-
-(yes, with parentheses), one can use
-
-    LINE FEED
-    FORM FEED
-    CARRIAGE RETURN
-    NEXT LINE
-    LF
-    FF
-    CR
-    NEL
-
-All the other standard abbreviations for the controls, such as C<ACK> for
-C<ACKNOWLEDGE> also can be used.
-
-One can also use
-
-    BYTE ORDER MARK
-    BOM
-
-and these abbreviations
-
-    Abbreviation        Full Name
-
-    CGJ                 COMBINING GRAPHEME JOINER
-    FVS1                MONGOLIAN FREE VARIATION SELECTOR ONE
-    FVS2                MONGOLIAN FREE VARIATION SELECTOR TWO
-    FVS3                MONGOLIAN FREE VARIATION SELECTOR THREE
-    LRE                 LEFT-TO-RIGHT EMBEDDING
-    LRM                 LEFT-TO-RIGHT MARK
-    LRO                 LEFT-TO-RIGHT OVERRIDE
-    MMSP                MEDIUM MATHEMATICAL SPACE
-    MVS                 MONGOLIAN VOWEL SEPARATOR
-    NBSP                NO-BREAK SPACE
-    NNBSP               NARROW NO-BREAK SPACE
-    PDF                 POP DIRECTIONAL FORMATTING
-    RLE                 RIGHT-TO-LEFT EMBEDDING
-    RLM                 RIGHT-TO-LEFT MARK
-    RLO                 RIGHT-TO-LEFT OVERRIDE
-    SHY                 SOFT HYPHEN
-    VS1                 VARIATION SELECTOR-1
-    .
-    .
-    .
-    VS256               VARIATION SELECTOR-256
-    WJ                  WORD JOINER
-    ZWJ                 ZERO WIDTH JOINER
-    ZWNJ                ZERO WIDTH NON-JOINER
-    ZWSP                ZERO WIDTH SPACE
-
-For backward compatibility one can use the old names for
-certain C0 and C1 controls
-
-    old                         new
-
-    FILE SEPARATOR              INFORMATION SEPARATOR FOUR
-    GROUP SEPARATOR             INFORMATION SEPARATOR THREE
-    HORIZONTAL TABULATION       CHARACTER TABULATION
-    HORIZONTAL TABULATION SET   CHARACTER TABULATION SET
-    HORIZONTAL TABULATION WITH JUSTIFICATION    CHARACTER TABULATION
-                                                WITH JUSTIFICATION
-    PARTIAL LINE DOWN           PARTIAL LINE FORWARD
-    PARTIAL LINE UP             PARTIAL LINE BACKWARD
-    RECORD SEPARATOR            INFORMATION SEPARATOR TWO
-    REVERSE INDEX               REVERSE LINE FEED
-    UNIT SEPARATOR              INFORMATION SEPARATOR ONE
-    VERTICAL TABULATION         LINE TABULATION
-    VERTICAL TABULATION SET     LINE TABULATION SET
-
-but the old names in addition to giving the character
-will also give a warning about being deprecated.
-
-And finally, certain published variants are usable, including some for
-controls that have no Unicode names:
-
-    name                                   character
-
-    END OF PROTECTED AREA                  END OF GUARDED AREA, U+0097
-    HIGH OCTET PRESET                      U+0081
-    HOP                                    U+0081
-    IND                                    U+0084
-    INDEX                                  U+0084
-    PAD                                    U+0080
-    PADDING CHARACTER                      U+0080
-    PRIVATE USE 1                          PRIVATE USE ONE, U+0091
-    PRIVATE USE 2                          PRIVATE USE TWO, U+0092
-    SGC                                    U+0099
-    SINGLE GRAPHIC CHARACTER INTRODUCER    U+0099
-    SINGLE-SHIFT 2                         SINGLE SHIFT TWO, U+008E
-    SINGLE-SHIFT 3                         SINGLE SHIFT THREE, U+008F
-    START OF PROTECTED AREA                START OF GUARDED AREA, U+0096
+Starting in Unicode 6.1 and Perl v5.16, Unicode defines many abbreviations and
+names that were formerly Perl extensions, and some additional ones that Perl
+did not previously accept.  The list is getting too long to reproduce here,
+but you can get the complete list from the Unicode web site:
+L<http://www.unicode.org/Public/UNIDATA/NameAliases.txt>.
+
+Earlier versions of Perl accepted almost all the 6.1 names.  These were most
+extensively documented in the v5.14 version of this pod:
+L<http://perldoc.perl.org/5.14.0/charnames.html#ALIASES>.
 
 =head1 CUSTOM ALIASES
 
 
 =head1 CUSTOM ALIASES
 
@@ -1200,9 +276,10 @@ C<\N{123}> means to match 123 non-newline characters, and is not treated as a
 charnames alias.  Aliases are discouraged from beginning with anything
 other than an alphabetic character and from containing anything other
 than alphanumerics, spaces, dashes, parentheses, and underscores.
 charnames alias.  Aliases are discouraged from beginning with anything
 other than an alphabetic character and from containing anything other
 than alphanumerics, spaces, dashes, parentheses, and underscores.
-Currently they must be ASCII.
+Currently they must be Latin1.
 
 
-An alias can map to either an official Unicode character name or to a
+An alias can map to either an official Unicode character name (not a loose
+matched name) or to a
 numeric code point (ordinal).  The latter is useful for assigning names
 to code points in Unicode private use areas such as U+E800 through
 U+F8FF.
 numeric code point (ordinal).  The latter is useful for assigning names
 to code points in Unicode private use areas such as U+E800 through
 U+F8FF.
@@ -1244,10 +321,46 @@ well, like
 
     use charnames ":full", ":alias" => "pro";
 
 
     use charnames ":full", ":alias" => "pro";
 
-Also, both these methods currently allow only a single character to be named.
+C<":loose"> has no effect with these.  Input names must match exactly, using
+C<":full"> rules.
+
+Also, both these methods currently allow only single characters to be named.
 To name a sequence of characters, use a
 L<custom translator|/CUSTOM TRANSLATORS> (described below).
 
 To name a sequence of characters, use a
 L<custom translator|/CUSTOM TRANSLATORS> (described below).
 
+=head1 charnames::string_vianame(I<name>)
+
+This is a runtime equivalent to C<\N{...}>.  I<name> can be any expression
+that evaluates to a name accepted by C<\N{...}> under the L<C<:full>
+option|/DESCRIPTION> to C<charnames>.  In addition, any other options for the
+controlling C<"use charnames"> in the same scope apply, like C<:loose> or any
+L<script list, C<:short> option|/DESCRIPTION>, or L<custom aliases|/CUSTOM
+ALIASES> you may have defined.
+
+The only differences are due to the fact that C<string_vianame> is run-time
+and C<\N{}> is compile time.  You can't interpolate inside a C<\N{}>, (so
+C<\N{$variable}> doesn't work); and if the input name is unknown,
+C<string_vianame> returns C<undef> instead of it being a syntax error.
+
+=head1 charnames::vianame(I<name>)
+
+This is similar to C<string_vianame>.  The main difference is that under most
+circumstances, vianame returns an ordinal code
+point, whereas C<string_vianame> returns a string.  For example,
+
+   printf "U+%04X", charnames::vianame("FOUR TEARDROP-SPOKED ASTERISK");
+
+prints "U+2722".
+
+This leads to the other two differences.  Since a single code point is
+returned, the function can't handle named character sequences, as these are
+composed of multiple characters (it returns C<undef> for these.  And, the code
+point can be that of any
+character, even ones that aren't legal under the C<S<use bytes>> pragma,
+
+See L</BUGS> for the circumstances in which the behavior differs
+from  that described above.
+
 =head1 charnames::viacode(I<code>)
 
 Returns the full name of the character indicated by the numeric code.
 =head1 charnames::viacode(I<code>)
 
 Returns the full name of the character indicated by the numeric code.
@@ -1257,56 +370,66 @@ For example,
 
 prints "FOUR TEARDROP-SPOKED ASTERISK".
 
 
 prints "FOUR TEARDROP-SPOKED ASTERISK".
 
-The name returned is the official name for the code point, if
-available; otherwise your custom alias for it.  This means that your
-alias will only be returned for code points that don't have an official
-Unicode name (nor Unicode version 1 name), such as private use code
-points, and the 4 control characters U+0080, U+0081, U+0084, and U+0099.
+The name returned is the "best" (defined below) official name or alias
+for the code point, if
+available; otherwise your custom alias for it, if defined; otherwise C<undef>.
+This means that your alias will only be returned for code points that don't
+have an official Unicode name (nor alias) such as private use code points.
+
 If you define more than one name for the code point, it is indeterminate
 which one will be returned.
 
 If you define more than one name for the code point, it is indeterminate
 which one will be returned.
 
-The function returns C<undef> if no name is known for the code point.
-In Unicode the proper name of these is the empty string, which
+As mentioned, the function returns C<undef> if no name is known for the code
+point.  In Unicode the proper name for these is the empty string, which
 C<undef> stringifies to.  (If you ask for a code point past the legal
 Unicode maximum of U+10FFFF that you haven't assigned an alias to, you
 get C<undef> plus a warning.)
 
 C<undef> stringifies to.  (If you ask for a code point past the legal
 Unicode maximum of U+10FFFF that you haven't assigned an alias to, you
 get C<undef> plus a warning.)
 
-The input number must be a non-negative integer or a string beginning
+The input number must be a non-negative integer, or a string beginning
 with C<"U+"> or C<"0x"> with the remainder considered to be a
 hexadecimal integer.  A literal numeric constant must be unsigned; it
 will be interpreted as hex if it has a leading zero or contains
 non-decimal hex digits; otherwise it will be interpreted as decimal.
 
 with C<"U+"> or C<"0x"> with the remainder considered to be a
 hexadecimal integer.  A literal numeric constant must be unsigned; it
 will be interpreted as hex if it has a leading zero or contains
 non-decimal hex digits; otherwise it will be interpreted as decimal.
 
-Notice that the name returned for of U+FEFF is "ZERO WIDTH NO-BREAK
-SPACE", not "BYTE ORDER MARK".
-
-=head1 charnames::string_vianame(I<name>)
-
-This is a runtime equivalent to C<\N{...}>.  I<name> can be any expression
-that evaluates to a name accepted by C<\N{...}> under the L<C<:full>
-option|/DESCRIPTION> to C<charnames>.  In addition, any other options for the
-controlling C<"use charnames"> in the same scope apply, like any L<script
-list, C<:short> option|/DESCRIPTION>, or L<custom aliases|/CUSTOM ALIASES> you
-may have defined.
-
-The only difference is that if the input name is unknown, C<string_vianame>
-returns C<undef> instead of the REPLACEMENT CHARACTER and does not raise a
-warning message.
-
-=head1 charnames::vianame(I<name>)
-
-This is similar to C<string_vianame>.  The main difference is that under most
-circumstances (see L</BUGS> for the others), vianame returns an ordinal code
-point, whereas C<string_vianame> returns a string.  For example,
-
-   printf "U+%04X", charnames::vianame("FOUR TEARDROP-SPOKED ASTERISK");
-
-prints "U+2722".
-
-This leads to the other two differences.  Since a single code point is
-returned, the function can't handle named character sequences, as these are
-composed of multiple characters.  And, the code point can be that of any
-character, even ones that aren't legal under the C<S<use bytes>> pragma,
+As mentioned above under L</ALIASES>, Unicode 6.1 defines extra names
+(synonyms or aliases) for some code points, most of which were already
+available as Perl extensions.  All these are accepted by C<\N{...}> and the
+other functions in this module, but C<viacode> has to choose which one
+name to return for a given input code point, so it returns the "best" name.
+To understand how this works, it is helpful to know more about the Unicode
+name properties.  All code points actually have only a single name, which
+(starting in Unicode 2.0) can never change once a character has been assigned
+to the code point.  But mistakes have been made in assigning names, for
+example sometimes a clerical error was made during the publishing of the
+Standard which caused words to be misspelled, and there was no way to correct
+those.  The Name_Alias property was eventually created to handle these
+situations.  If a name was wrong, a corrected synonym would be published for
+it, using Name_Alias.  C<viacode> will return that corrected synonym as the
+"best" name for a code point.  (It is even possible, though it hasn't happened
+yet, that the correction itself will need to be corrected, and so another
+Name_Alias can be created for that code point; C<viacode> will return the
+most recent correction.)
+
+The Unicode name for each of the control characters (such as LINE FEED) is the
+empty string.  However almost all had names assigned by other standards, such
+as the ASCII Standard, or were in common use.  C<viacode> returns these names
+as the "best" ones available.  Unicode 6.1 has created Name_Aliases for each
+of them, including alternate names, like NEW LINE.  C<viacode> uses the
+original name, "LINE FEED" in preference to the alternate.  Similarly the
+name returned for U+FEFF is "ZERO WIDTH NO-BREAK SPACE", not "BYTE ORDER
+MARK".
+
+Until Unicode 6.1, the 4 control characters U+0080, U+0081, U+0084, and U+0099
+did not have names nor aliases.
+To preserve backwards compatibility, any alias you define for these code
+points will be returned by this function, in preference to the official name.
+
+Some code points also have abbreviated names, such as "LF" or "NL".
+C<viacode> never returns these.
+
+Because a name correction may be added in future Unicode releases, the name
+that C<viacode> returns may change as a result.  This is a rare event, but it
+does happen.
 
 =head1 CUSTOM TRANSLATORS
 
 
 =head1 CUSTOM TRANSLATORS
 
@@ -1322,7 +445,11 @@ following magic incantation:
 
 Here translator() is a subroutine which takes I<CHARNAME> as an
 argument, and returns text to insert into the string instead of the
 
 Here translator() is a subroutine which takes I<CHARNAME> as an
 argument, and returns text to insert into the string instead of the
-C<\N{I<CHARNAME>}> escape.  Since the text to insert should be different
+C<\N{I<CHARNAME>}> escape.
+
+This is the only way you can create a custom named sequence of code points.
+
+Since the text to insert should be different
 in C<bytes> mode and out of it, the function should check the current
 state of C<bytes>-flag as in:
 
 in C<bytes> mode and out of it, the function should check the current
 state of C<bytes>-flag as in:
 
@@ -1338,12 +465,12 @@ state of C<bytes>-flag as in:
 
 See L</CUSTOM ALIASES> above for restrictions on I<CHARNAME>.
 
 
 See L</CUSTOM ALIASES> above for restrictions on I<CHARNAME>.
 
-Of course, C<vianame> and C<viacode> would need to be overridden as
-well.
+Of course, C<vianame>, C<viacode>, and C<string_vianame> would need to be
+overridden as well.
 
 =head1 BUGS
 
 
 =head1 BUGS
 
-vianame normally returns an ordinal code point, but when the input name is of
+vianame() normally returns an ordinal code point, but when the input name is of
 the form C<U+...>, it returns a chr instead.  In this case, if C<use bytes> is
 in effect and the character won't fit into a byte, it returns C<undef> and
 raises a warning.
 the form C<U+...>, it returns a chr instead.  In this case, if C<use bytes> is
 in effect and the character won't fit into a byte, it returns C<undef> and
 raises a warning.