/*
* This file was produced by running the config_h.SH script, which
- * gets its values from config.sh, which is generally produced by
+ * gets its values from undef, which is generally produced by
* running Configure.
*
* Feel free to modify any of this as the need arises. Note, however,
* that running config_h.SH again will wipe out any changes you've made.
- * For a more permanent change edit config.sh and rerun config_h.SH.
+ * For a more permanent change edit undef and rerun config_h.SH.
*
* $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
*/
/*
* Package name : perl5
* Source directory :
- * Configuration time: Sun Jan 9 15:13:25 2000
+ * Configuration time: Mon Jul 2 02:03:50 2001
* Configured by : gsar
* Target system :
*/
*/
#define HAS_DLERROR /**/
-/* SETUID_SCRIPTS_ARE_SECURE_NOW:
- * This symbol, if defined, indicates that the bug that prevents
- * setuid scripts from being secure is not present in this kernel.
- */
-/* DOSUID:
- * This symbol, if defined, indicates that the C program should
- * check the script that it is executing for setuid/setgid bits, and
- * attempt to emulate setuid/setgid on systems that have disabled
- * setuid #! scripts because the kernel can't do it securely.
- * It is up to the package designer to make sure that this emulation
- * is done securely. Among other things, it should do an fstat on
- * the script it just opened to make sure it really is a setuid/setgid
- * script, it should make sure the arguments passed correspond exactly
- * to the argument on the #! line, and it should not trust any
- * subprocesses to which it must pass the filename rather than the
- * file descriptor of the script to be executed.
- */
-/*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
-/*#define DOSUID /**/
-
/* HAS_DUP2:
* This symbol, if defined, indicates that the dup2 routine is
* available to duplicate file descriptors.
*/
#define HAS_FGETPOS /**/
-/* FLEXFILENAMES:
- * This symbol, if defined, indicates that the system supports filenames
- * longer than 14 characters.
- */
-#define FLEXFILENAMES /**/
-
/* HAS_FLOCK:
* This symbol, if defined, indicates that the flock routine is
* available to do file locking.
*/
/*#define HAS_GETPGID /**/
-/* HAS_GETPGRP:
- * This symbol, if defined, indicates that the getpgrp routine is
- * available to get the current process group.
- */
-/* USE_BSD_GETPGRP:
- * This symbol, if defined, indicates that getpgrp needs one
- * arguments whereas USG one needs none.
- */
-/*#define HAS_GETPGRP /**/
-/*#define USE_BSD_GETPGRP /**/
-
/* HAS_GETPGRP2:
* This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
* routine is available to get the current process group.
*/
#define HAS_MKTIME /**/
+/* HAS_MSYNC:
+ * This symbol, if defined, indicates that the msync system call is
+ * available to synchronize a mapped file.
+ */
+/*#define HAS_MSYNC /**/
+
+/* HAS_MUNMAP:
+ * This symbol, if defined, indicates that the munmap system call is
+ * available to unmap a region, usually mapped by mmap().
+ */
+/*#define HAS_MUNMAP /**/
+
/* HAS_NICE:
* This symbol, if defined, indicates that the nice routine is
* available.
*/
/*#define HAS_SETPGID /**/
-/* HAS_SETPGRP:
- * This symbol, if defined, indicates that the setpgrp routine is
- * available to set the current process group.
- */
-/* USE_BSD_SETPGRP:
- * This symbol, if defined, indicates that setpgrp needs two
- * arguments whereas USG one needs none. See also HAS_SETPGID
- * for a POSIX interface.
- */
-/*#define HAS_SETPGRP /**/
-/*#define USE_BSD_SETPGRP /**/
-
/* HAS_SETPGRP2:
* This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
* routine is available to set the current process group.
*/
#define HAS_STRTOL /**/
-/* HAS_STRTOUL:
- * This symbol, if defined, indicates that the strtoul routine is
- * available to provide conversion of strings to unsigned long.
- */
-#define HAS_STRTOUL /**/
-
/* HAS_STRXFRM:
* This symbol, if defined, indicates that the strxfrm() routine is
* available to transform strings.
*/
#define HAS_UMASK /**/
+/* HAS_USLEEP:
+ * This symbol, if defined, indicates that the usleep routine is
+ * available to let the process sleep on a sub-second accuracy.
+ */
+/*#define HAS_USLEEP /**/
+
/* HASVOLATILE:
* This symbol, if defined, indicates that this C compiler knows about
* the volatile declaration.
* This symbol, if defined, indicates that <sys/ioctl.h> exists and should
* be included. Otherwise, include <sgtty.h> or <termio.h>.
*/
+/* I_SYS_SOCKIO:
+ * This symbol, if defined, indicates the <sys/sockio.h> should be included
+ * to get socket ioctl options, like SIOCATMARK.
+ */
/*#define I_SYS_IOCTL /**/
+/*#define I_SYS_SOCKIO /**/
/* I_SYS_NDIR:
* This symbol, if defined, indicates to the C program that it should
*/
/*#define I_VALUES /**/
-/* I_STDARG:
- * This symbol, if defined, indicates that <stdarg.h> exists and should
- * be included.
- */
-/* I_VARARGS:
- * This symbol, if defined, indicates to the C program that it should
- * include <varargs.h>.
- */
-#define I_STDARG /**/
-/*#define I_VARARGS /**/
-
/* I_VFORK:
* This symbol, if defined, indicates to the C program that it should
* include vfork.h.
*/
#define SH_PATH "cmd /x /c" /**/
-/* STDCHAR:
- * This symbol is defined to be the type of char used in stdio.h.
- * It has the values "unsigned char" or "char".
- */
-#define STDCHAR char /**/
-
-/* CROSSCOMPILE:
- * This symbol, if defined, signifies that we our
- * build process is a cross-compilation.
- */
-/*#define CROSSCOMPILE /**/
-
/* INTSIZE:
* This symbol contains the value of sizeof(int) so that the C
* preprocessor can make decisions based on it.
#ifdef HAS_QUAD
# define Quad_t long long /**/
# define Uquad_t unsigned long long /**/
-# define QUADKIND undef /**/
+# define QUADKIND 5 /**/
# define QUAD_IS_INT 1
# define QUAD_IS_LONG 2
# define QUAD_IS_LONG_LONG 3
*/
/*#define I_SYS_SECURITY /**/
+/* OSNAME:
+ * This symbol contains the name of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
+ */
+/* OSVERS:
+ * This symbol contains the version of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
+ */
+#define OSNAME "MSWin32" /**/
+#define OSVERS "4.0" /**/
+
/* MEM_ALIGNBYTES:
* This symbol contains the number of bytes required to align a
- * double. Usual values are 2, 4 and 8. The default is eight,
- * for safety.
+ * double, or a long double when applicable. Usual values are 2,
+ * 4 and 8. The default is eight, for safety.
*/
-#if defined(CROSSCOMPILE) || defined(MULTIARCH)
+#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
# define MEM_ALIGNBYTES 8
#else
#define MEM_ALIGNBYTES 8
#endif
+/* ARCHLIB:
+ * This variable, if defined, holds the name of the directory in
+ * which the user wants to put architecture-dependent public
+ * library files for perl5. It is most often a local directory
+ * such as /usr/local/lib. Programs using this variable must be
+ * prepared to deal with filename expansion. If ARCHLIB is the
+ * same as PRIVLIB, it is not defined, since presumably the
+ * program already searches PRIVLIB.
+ */
+/* ARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of ARCHLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define ARCHLIB "c:\\perl\\5.7.2\\lib\\MSWin32-x86-multi-thread" /**/
+/*#define ARCHLIB_EXP "" /**/
+
+/* ARCHNAME:
+ * This symbol holds a string representing the architecture name.
+ * It may be used to construct an architecture-dependant pathname
+ * where library files may be held under a private library, for
+ * instance.
+ */
+#define ARCHNAME "MSWin32-x86-multi-thread" /**/
+
+/* HAS_ATOLF:
+ * This symbol, if defined, indicates that the atolf routine is
+ * available to convert strings into long doubles.
+ */
+/*#define HAS_ATOLF /**/
+
+/* HAS_ATOLL:
+ * This symbol, if defined, indicates that the atoll routine is
+ * available to convert strings into long longs.
+ */
+/*#define HAS_ATOLL /**/
+
+/* BIN:
+ * This symbol holds the path of the bin directory where the package will
+ * be installed. Program must be prepared to deal with ~name substitution.
+ */
+/* BIN_EXP:
+ * This symbol is the filename expanded version of the BIN symbol, for
+ * programs that do not want to deal with that at run-time.
+ */
+#define BIN "c:\\perl\\5.7.2\\bin\\MSWin32-x86-multi-thread" /**/
+#define BIN_EXP "c:\\perl\\5.7.2\\bin\\MSWin32-x86-multi-thread" /**/
+
+/* PERL_BINCOMPAT_5005:
+ * This symbol, if defined, indicates that this version of Perl should be
+ * binary-compatible with Perl 5.005. This is impossible for builds
+ * that use features like threads and multiplicity it is always undef
+ * for those versions.
+ */
+/*#define PERL_BINCOMPAT_5005 /**/
+
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
* i.e. 0x1234 or 0x4321, etc...
* so the default case (for NeXT) is big endian to catch them.
* This might matter for NeXT 3.0.
*/
-#if defined(CROSSCOMPILE) || defined(MULTIARCH)
+#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
# ifdef __LITTLE_ENDIAN__
# if LONGSIZE == 4
# define BYTEORDER 0x1234
#define BYTEORDER 0x1234 /* large digits for MSB */
#endif /* NeXT */
+/* CAT2:
+ * This macro catenates 2 tokens together.
+ */
+/* STRINGIFY:
+ * This macro surrounds its token with double quotes.
+ */
+#if 42 == 1
+#define CAT2(a,b) a/**/b
+#define STRINGIFY(a) "a"
+ /* If you can get stringification with catify, tell me how! */
+#endif
+#if 42 == 42
+#define PeRl_CaTiFy(a, b) a ## b
+#define PeRl_StGiFy(a) #a
+/* the additional level of indirection enables these macros to be
+ * used as arguments to other macros. See K&R 2nd ed., page 231. */
+#define CAT2(a,b) PeRl_CaTiFy(a,b)
+#define StGiFy(a) PeRl_StGiFy(a)
+#define STRINGIFY(a) PeRl_StGiFy(a)
+#endif
+#if 42 != 1 && 42 != 42
+# include "Bletch: How does this C preprocessor catenate tokens?"
+#endif
+
+/* CPPSTDIN:
+ * This symbol contains the first part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. Typical value of "cc -E" or "/lib/cpp", but it can also
+ * call a wrapper. See CPPRUN.
+ */
+/* CPPMINUS:
+ * This symbol contains the second part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. This symbol will have the value "-" if CPPSTDIN needs a minus
+ * to specify standard input, otherwise the value is "".
+ */
+/* CPPRUN:
+ * This symbol contains the string which will invoke a C preprocessor on
+ * the standard input and produce to standard output. It needs to end
+ * with CPPLAST, after all other preprocessor flags have been specified.
+ * The main difference with CPPSTDIN is that this program will never be a
+ * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
+ * available directly to the user. Note that it may well be different from
+ * the preprocessor used to compile the C program.
+ */
+/* CPPLAST:
+ * This symbol is intended to be used along with CPPRUN in the same manner
+ * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
+ */
+#define CPPSTDIN "gcc -E"
+#define CPPMINUS "-"
+#define CPPRUN "gcc -E"
+#define CPPLAST ""
+
+/* HAS__FWALK:
+ * This symbol, if defined, indicates that the _fwalk system call is
+ * available to apply a function to all the file handles.
+ */
+/*#define HAS__FWALK /**/
+
+/* HAS_ACCESS:
+ * This manifest constant lets the C program know that the access()
+ * system call is available to check for accessibility using real UID/GID.
+ * (always present on UNIX.)
+ */
+#define HAS_ACCESS /**/
+
/* CASTI32:
* This symbol is defined if the C compiler can cast negative
* or large floating point numbers to 32-bit ints.
*/
/*#define VOID_CLOSEDIR /**/
-/* HAS_FD_SET:
- * This symbol, when defined, indicates presence of the fd_set typedef
- * in <sys/types.h>
+/* HAS_STRUCT_CMSGHDR:
+ * This symbol, if defined, indicates that the struct cmsghdr
+ * is supported.
*/
-#define HAS_FD_SET /**/
+/*#define HAS_STRUCT_CMSGHDR /**/
-/* Gconvert:
- * This preprocessor macro is defined to convert a floating point
- * number to a string without a trailing decimal point. This
- * emulates the behavior of sprintf("%g"), but is sometimes much more
- * efficient. If gconvert() is not available, but gcvt() drops the
- * trailing decimal point, then gcvt() is used. If all else fails,
- * a macro using sprintf("%g") is used. Arguments for the Gconvert
- * macro are: value, number of digits, whether trailing zeros should
- * be retained, and the output buffer.
- * Possible values are:
- * d_Gconvert='gconvert((x),(n),(t),(b))'
- * d_Gconvert='gcvt((x),(n),(b))'
- * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- * The last two assume trailing zeros should not be kept.
+/* HAS_CSH:
+ * This symbol, if defined, indicates that the C-shell exists.
*/
-#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
-
-/* HAS_GNULIBC:
- * This symbol, if defined, indicates to the C program that
- * the GNU C library is being used.
+/* CSH:
+ * This symbol, if defined, contains the full pathname of csh.
*/
-/*#define HAS_GNULIBC /**/
-/* HAS_ISASCII:
- * This manifest constant lets the C program know that isascii
- * is available.
+/*#define HAS_CSH /**/
+#ifdef HAS_CSH
+#define CSH "" /**/
+#endif
+
+/* DLSYM_NEEDS_UNDERSCORE:
+ * This symbol, if defined, indicates that we need to prepend an
+ * underscore to the symbol name before calling dlsym(). This only
+ * makes sense if you *have* dlsym, which we will presume is the
+ * case if you're using dl_dlopen.xs.
*/
-#define HAS_ISASCII /**/
+/*#define DLSYM_NEEDS_UNDERSCORE /**/
-/* HAS_LCHOWN:
- * This symbol, if defined, indicates that the lchown routine is
- * available to operate on a symbolic link (instead of following the
- * link).
+/* HAS_DRAND48_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the drand48() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern double drand48 _((void));
*/
-/*#define HAS_LCHOWN /**/
+/*#define HAS_DRAND48_PROTO /**/
-/* HAS_OPEN3:
- * This manifest constant lets the C program know that the three
- * argument form of open(2) is available.
+/* HAS_ENDGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the group database.
*/
-/*#define HAS_OPEN3 /**/
+/*#define HAS_ENDGRENT /**/
-/* HAS_SAFE_BCOPY:
- * This symbol, if defined, indicates that the bcopy routine is available
- * to copy potentially overlapping memory blocks. Otherwise you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
- */
-/*#define HAS_SAFE_BCOPY /**/
-
-/* HAS_SAFE_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy potentially overlapping memory blocks. Otherwise you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
- */
-/*#define HAS_SAFE_MEMCPY /**/
-
-/* HAS_SANE_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * and can be used to compare relative magnitudes of chars with their high
- * bits set. If it is not defined, roll your own version.
- */
-#define HAS_SANE_MEMCMP /**/
-
-/* HAS_SIGACTION:
- * This symbol, if defined, indicates that Vr4's sigaction() routine
- * is available.
- */
-/*#define HAS_SIGACTION /**/
-
-/* HAS_SIGSETJMP:
- * This variable indicates to the C program that the sigsetjmp()
- * routine is available to save the calling process's registers
- * and stack environment for later use by siglongjmp(), and
- * to optionally save the process's signal mask. See
- * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
- */
-/* Sigjmp_buf:
- * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
- */
-/* Sigsetjmp:
- * This macro is used in the same way as sigsetjmp(), but will invoke
- * traditional setjmp() if sigsetjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-/* Siglongjmp:
- * This macro is used in the same way as siglongjmp(), but will invoke
- * traditional longjmp() if siglongjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-/*#define HAS_SIGSETJMP /**/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
-
-/* USE_STDIO_PTR:
- * This symbol is defined if the _ptr and _cnt fields (or similar)
- * of the stdio FILE structure can be used to access the stdio buffer
- * for a file handle. If this is defined, then the FILE_ptr(fp)
- * and FILE_cnt(fp) macros will also be defined and should be used
- * to access these fields.
- */
-/* FILE_ptr:
- * This macro is used to access the _ptr field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_PTR_LVALUE:
- * This symbol is defined if the FILE_ptr macro can be used as an
- * lvalue.
- */
-/* FILE_cnt:
- * This macro is used to access the _cnt field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_CNT_LVALUE:
- * This symbol is defined if the FILE_cnt macro can be used as an
- * lvalue.
- */
-#define USE_STDIO_PTR /**/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp) ((fp)->_ptr)
-#define STDIO_PTR_LVALUE /**/
-#define FILE_cnt(fp) ((fp)->_cnt)
-#define STDIO_CNT_LVALUE /**/
-#endif
-
-/* USE_STDIO_BASE:
- * This symbol is defined if the _base field (or similar) of the
- * stdio FILE structure can be used to access the stdio buffer for
- * a file handle. If this is defined, then the FILE_base(fp) macro
- * will also be defined and should be used to access this field.
- * Also, the FILE_bufsiz(fp) macro will be defined and should be used
- * to determine the number of bytes in the buffer. USE_STDIO_BASE
- * will never be defined unless USE_STDIO_PTR is.
- */
-/* FILE_base:
- * This macro is used to access the _base field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_BASE is defined.
- */
-/* FILE_bufsiz:
- * This macro is used to determine the number of bytes in the I/O
- * buffer pointed to by _base field (or equivalent) of the FILE
- * structure pointed to its argument. This macro will always be defined
- * if USE_STDIO_BASE is defined.
- */
-#define USE_STDIO_BASE /**/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp) ((fp)->_base)
-#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
-#endif
-
-/* HAS_VPRINTF:
- * This symbol, if defined, indicates that the vprintf routine is available
- * to printf with a pointer to an argument list. If unavailable, you
- * may need to write your own, probably in terms of _doprnt().
- */
-/* USE_CHAR_VSPRINTF:
- * This symbol is defined if this system has vsprintf() returning type
- * (char*). The trend seems to be to declare it as "int vsprintf()". It
- * is up to the package author to declare vsprintf correctly based on the
- * symbol.
- */
-#define HAS_VPRINTF /**/
-/*#define USE_CHAR_VSPRINTF /**/
-
-/* DOUBLESIZE:
- * This symbol contains the size of a double, so that the C preprocessor
- * can make decisions based on it.
- */
-#define DOUBLESIZE 8 /**/
-
-/* I_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <time.h>.
- */
-/* I_SYS_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h>.
- */
-/* I_SYS_TIME_KERNEL:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h> with KERNEL defined.
- */
-#define I_TIME /**/
-/*#define I_SYS_TIME /**/
-/*#define I_SYS_TIME_KERNEL /**/
-
-/* VAL_O_NONBLOCK:
- * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- * non-blocking I/O for the file descriptor. Note that there is no way
- * back, i.e. you cannot turn it blocking again this way. If you wish to
- * alternatively switch between blocking and non-blocking, use the
- * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
- */
-/* VAL_EAGAIN:
- * This symbol holds the errno error code set by read() when no data was
- * present on the non-blocking file descriptor.
- */
-/* RD_NODATA:
- * This symbol holds the return code from read() when no data is present
- * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- * not defined, then you can't distinguish between no data and EOF by
- * issuing a read(). You'll have to find another way to tell for sure!
- */
-/* EOF_NONBLOCK:
- * This symbol, if defined, indicates to the C program that a read() on
- * a non-blocking file descriptor will return 0 on EOF, and not the value
- * held in RD_NODATA (-1 usually, in that case!).
- */
-#define VAL_O_NONBLOCK O_NONBLOCK
-#define VAL_EAGAIN EAGAIN
-#define RD_NODATA -1
-#define EOF_NONBLOCK
-
-/* PTRSIZE:
- * This symbol contains the size of a pointer, so that the C preprocessor
- * can make decisions based on it. It will be sizeof(void *) if
- * the compiler supports (void *); otherwise it will be
- * sizeof(char *).
- */
-#define PTRSIZE 4 /**/
-
-/* Drand01:
- * This macro is to be used to generate uniformly distributed
- * random numbers over the range [0., 1.[. You may have to supply
- * an 'extern double drand48();' in your program since SunOS 4.1.3
- * doesn't provide you with anything relevant in it's headers.
- * See HAS_DRAND48_PROTO.
- */
-/* Rand_seed_t:
- * This symbol defines the type of the argument of the
- * random seed function.
- */
-/* seedDrand01:
- * This symbol defines the macro to be used in seeding the
- * random number generator (see Drand01).
- */
-/* RANDBITS:
- * This symbol indicates how many bits are produced by the
- * function used to generate normalized random numbers.
- * Values include 15, 16, 31, and 48.
- */
-#define Drand01() (rand()/(double)((unsigned)1<<RANDBITS)) /**/
-#define Rand_seed_t unsigned /**/
-#define seedDrand01(x) srand((Rand_seed_t)x) /**/
-#define RANDBITS 15 /**/
-
-/* SSize_t:
- * This symbol holds the type used by functions that return
- * a count of bytes or an error condition. It must be a signed type.
- * It is usually ssize_t, but may be long or int, etc.
- * It may be necessary to include <sys/types.h> or <unistd.h>
- * to get any typedef'ed information.
- * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
- */
-#define SSize_t int /* signed count of bytes */
-
-/* EBCDIC:
- * This symbol, if defined, indicates that this system uses
- * EBCDIC encoding.
- */
-/*#define EBCDIC /**/
-
-/* ARCHLIB:
- * This variable, if defined, holds the name of the directory in
- * which the user wants to put architecture-dependent public
- * library files for perl5. It is most often a local directory
- * such as /usr/local/lib. Programs using this variable must be
- * prepared to deal with filename expansion. If ARCHLIB is the
- * same as PRIVLIB, it is not defined, since presumably the
- * program already searches PRIVLIB.
- */
-/* ARCHLIB_EXP:
- * This symbol contains the ~name expanded version of ARCHLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define ARCHLIB "c:\\perl\\5.5.640\\lib\\MSWin32-x86" /**/
-/*#define ARCHLIB_EXP "" /**/
-
-/* BIN:
- * This symbol holds the path of the bin directory where the package will
- * be installed. Program must be prepared to deal with ~name substitution.
- */
-/* BIN_EXP:
- * This symbol is the filename expanded version of the BIN symbol, for
- * programs that do not want to deal with that at run-time.
- */
-#define BIN "c:\\perl\\5.5.640\\bin\\MSWin32-x86" /**/
-#define BIN_EXP "c:\\perl\\5.5.640\\bin\\MSWin32-x86" /**/
-
-/* INSTALL_USR_BIN_PERL:
- * This symbol, if defined, indicates that Perl is to be installed
- * also as /usr/bin/perl.
- */
-/*#define INSTALL_USR_BIN_PERL /**/
-
-/* PRIVLIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- */
-/* PRIVLIB_EXP:
- * This symbol contains the ~name expanded version of PRIVLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define PRIVLIB "c:\\perl\\5.5.640\\lib" /**/
-#define PRIVLIB_EXP (win32_get_privlib("5.5.640")) /**/
-
-/* SITEARCH:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-dependent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
- */
-/* SITEARCH_EXP:
- * This symbol contains the ~name expanded version of SITEARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* HAS_ENDHOSTENT:
+ * This symbol, if defined, indicates that the endhostent() routine is
+ * available to close whatever was being used for host queries.
*/
-#define SITEARCH "c:\\perl\\site\\5.5.640\\lib\\MSWin32-x86" /**/
-/*#define SITEARCH_EXP "" /**/
+/*#define HAS_ENDHOSTENT /**/
-/* SITELIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-independent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
+/* HAS_ENDNETENT:
+ * This symbol, if defined, indicates that the endnetent() routine is
+ * available to close whatever was being used for network queries.
*/
-/* SITELIB_EXP:
- * This symbol contains the ~name expanded version of SITELIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/*#define HAS_ENDNETENT /**/
+
+/* HAS_ENDPROTOENT:
+ * This symbol, if defined, indicates that the endprotoent() routine is
+ * available to close whatever was being used for protocol queries.
*/
-#define SITELIB "c:\\perl\\site\\5.5.640\\lib" /**/
-#define SITELIB_EXP (win32_get_sitelib("5.5.640")) /**/
+/*#define HAS_ENDPROTOENT /**/
-/* PERL_VENDORLIB_EXP:
- * This symbol contains the ~name expanded version of VENDORLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* HAS_ENDPWENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the passwd database.
*/
-/*#define PERL_VENDORLIB_EXP "" /**/
+/*#define HAS_ENDPWENT /**/
-/* OSNAME:
- * This symbol contains the name of the operating system, as determined
- * by Configure. You shouldn't rely on it too much; the specific
- * feature tests from Configure are generally more reliable.
+/* HAS_ENDSERVENT:
+ * This symbol, if defined, indicates that the endservent() routine is
+ * available to close whatever was being used for service queries.
*/
-#define OSNAME "MSWin32" /**/
+/*#define HAS_ENDSERVENT /**/
-/* CAT2:
- * This macro catenates 2 tokens together.
+/* HAS_FCHDIR:
+ * This symbol, if defined, indicates that the fchdir routine is
+ * available to change directory using a file descriptor.
*/
-/* STRINGIFY:
- * This macro surrounds its token with double quotes.
+/*#define HAS_FCHDIR /**/
+
+/* FCNTL_CAN_LOCK:
+ * This symbol, if defined, indicates that fcntl() can be used
+ * for file locking. Normally on Unix systems this is defined.
+ * It may be undefined on VMS.
*/
-#if 42 == 1
-#define CAT2(a,b)a/**/b
-#define STRINGIFY(a)"a"
- /* If you can get stringification with catify, tell me how! */
-#endif
-#if 42 == 42
-#define CAT2(a,b)a ## b
-#define StGiFy(a)# a
-#define STRINGIFY(a)StGiFy(a)
-#endif
-#if 42 != 1 && 42 != 42
-#include "Bletch: How does this C preprocessor catenate tokens?"
-#endif
+/*#define FCNTL_CAN_LOCK /**/
-/* CPPSTDIN:
- * This symbol contains the first part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. Typical value of "cc -E" or "/lib/cpp", but it can also
- * call a wrapper. See CPPRUN.
+/* HAS_FD_SET:
+ * This symbol, when defined, indicates presence of the fd_set typedef
+ * in <sys/types.h>
*/
-/* CPPMINUS:
- * This symbol contains the second part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. This symbol will have the value "-" if CPPSTDIN needs a minus
- * to specify standard input, otherwise the value is "".
+#define HAS_FD_SET /**/
+
+/* FLEXFILENAMES:
+ * This symbol, if defined, indicates that the system supports filenames
+ * longer than 14 characters.
*/
-/* CPPRUN:
- * This symbol contains the string which will invoke a C preprocessor on
- * the standard input and produce to standard output. It needs to end
- * with CPPLAST, after all other preprocessor flags have been specified.
- * The main difference with CPPSTDIN is that this program will never be a
- * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
- * available directly to the user. Note that it may well be different from
- * the preprocessor used to compile the C program.
+#define FLEXFILENAMES /**/
+
+/* HAS_FPOS64_T:
+ * This symbol will be defined if the C compiler supports fpos64_t.
*/
-/* CPPLAST:
- * This symbol is intended to be used along with CPPRUN in the same manner
- * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
+/*#define HAS_FPOS64_T /**/
+
+/* HAS_FREXPL:
+ * This symbol, if defined, indicates that the frexpl routine is
+ * available to break a long double floating-point number into
+ * a normalized fraction and an integral power of 2.
*/
-#define CPPSTDIN "gcc -E"
-#define CPPMINUS "-"
-#define CPPRUN "gcc -E"
-#define CPPLAST ""
+/*#define HAS_FREXPL /**/
-/* HAS_ACCESS:
- * This manifest constant lets the C program know that the access()
- * system call is available to check for accessibility using real UID/GID.
- * (always present on UNIX.)
+/* HAS_STRUCT_FS_DATA:
+ * This symbol, if defined, indicates that the struct fs_data
+ * to do statfs() is supported.
*/
-#define HAS_ACCESS /**/
+/*#define HAS_STRUCT_FS_DATA /**/
-/* HAS_CSH:
- * This symbol, if defined, indicates that the C-shell exists.
+/* HAS_FSEEKO:
+ * This symbol, if defined, indicates that the fseeko routine is
+ * available to fseek beyond 32 bits (useful for ILP32 hosts).
*/
-/* CSH:
- * This symbol, if defined, contains the full pathname of csh.
+/*#define HAS_FSEEKO /**/
+
+/* HAS_FSTATFS:
+ * This symbol, if defined, indicates that the fstatfs routine is
+ * available to stat filesystems by file descriptors.
*/
-/*#define HAS_CSH /**/
-#ifdef HAS_CSH
-#define CSH "" /**/
-#endif
+/*#define HAS_FSTATFS /**/
-/* HAS_ENDGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the group database.
+/* HAS_FSYNC:
+ * This symbol, if defined, indicates that the fsync routine is
+ * available to write a file's modified data and attributes to
+ * permanent storage.
*/
-/*#define HAS_ENDGRENT /**/
+/*#define HAS_FSYNC /**/
-/* HAS_ENDHOSTENT:
- * This symbol, if defined, indicates that the endhostent() routine is
- * available to close whatever was being used for host queries.
+/* HAS_FTELLO:
+ * This symbol, if defined, indicates that the ftello routine is
+ * available to ftell beyond 32 bits (useful for ILP32 hosts).
*/
-/*#define HAS_ENDHOSTENT /**/
+/*#define HAS_FTELLO /**/
-/* HAS_ENDNETENT:
- * This symbol, if defined, indicates that the endnetent() routine is
- * available to close whatever was being used for network queries.
+/* Gconvert:
+ * This preprocessor macro is defined to convert a floating point
+ * number to a string without a trailing decimal point. This
+ * emulates the behavior of sprintf("%g"), but is sometimes much more
+ * efficient. If gconvert() is not available, but gcvt() drops the
+ * trailing decimal point, then gcvt() is used. If all else fails,
+ * a macro using sprintf("%g") is used. Arguments for the Gconvert
+ * macro are: value, number of digits, whether trailing zeros should
+ * be retained, and the output buffer.
+ * Possible values are:
+ * d_Gconvert='gconvert((x),(n),(t),(b))'
+ * d_Gconvert='gcvt((x),(n),(b))'
+ * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ * The last two assume trailing zeros should not be kept.
*/
-/*#define HAS_ENDNETENT /**/
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
-/* HAS_ENDPROTOENT:
- * This symbol, if defined, indicates that the endprotoent() routine is
- * available to close whatever was being used for protocol queries.
+/* HAS_GETCWD:
+ * This symbol, if defined, indicates that the getcwd routine is
+ * available to get the current working directory.
*/
-/*#define HAS_ENDPROTOENT /**/
+#define HAS_GETCWD /**/
-/* HAS_ENDPWENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the passwd database.
+/* HAS_GETESPWNAM:
+ * This symbol, if defined, indicates that the getespwnam system call is
+ * available to retrieve enchanced (shadow) password entries by name.
*/
-/*#define HAS_ENDPWENT /**/
+/*#define HAS_GETESPWNAM /**/
-/* HAS_ENDSERVENT:
- * This symbol, if defined, indicates that the endservent() routine is
- * available to close whatever was being used for service queries.
+/* HAS_GETFSSTAT:
+ * This symbol, if defined, indicates that the getfsstat routine is
+ * available to stat filesystems in bulk.
*/
-/*#define HAS_ENDSERVENT /**/
+/*#define HAS_GETFSSTAT /**/
/* HAS_GETGRENT:
* This symbol, if defined, indicates that the getgrent routine is
*/
#define HAS_GETHOSTNAME /**/
#define HAS_UNAME /**/
-#undef HAS_PHOSTNAME
+/*#define HAS_PHOSTNAME /**/
#ifdef HAS_PHOSTNAME
#define PHOSTNAME "" /* How to get the host name */
#endif
+/* HAS_GETHOST_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for gethostent(), gethostbyname(), and
+ * gethostbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define HAS_GETHOST_PROTOS /**/
+
+/* HAS_GETITIMER:
+ * This symbol, if defined, indicates that the getitimer routine is
+ * available to return interval timers.
+ */
+/*#define HAS_GETITIMER /**/
+
+/* HAS_GETMNT:
+ * This symbol, if defined, indicates that the getmnt routine is
+ * available to get filesystem mount info by filename.
+ */
+/*#define HAS_GETMNT /**/
+
+/* HAS_GETMNTENT:
+ * This symbol, if defined, indicates that the getmntent routine is
+ * available to iterate through mounted file systems to get their info.
+ */
+/*#define HAS_GETMNTENT /**/
+
/* HAS_GETNETBYADDR:
* This symbol, if defined, indicates that the getnetbyaddr() routine is
* available to look up networks by their IP addresses.
*/
/*#define HAS_GETNETENT /**/
+/* HAS_GETNET_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getnetent(), getnetbyname(), and
+ * getnetbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+/*#define HAS_GETNET_PROTOS /**/
+
+/* HAS_GETPAGESIZE:
+ * This symbol, if defined, indicates that the getpagesize system call
+ * is available to get system page size, which is the granularity of
+ * many memory management calls.
+ */
+/*#define HAS_GETPAGESIZE /**/
+
/* HAS_GETPROTOENT:
* This symbol, if defined, indicates that the getprotoent() routine is
* available to look up protocols in some data base or another.
*/
/*#define HAS_GETPROTOENT /**/
+/* HAS_GETPGRP:
+ * This symbol, if defined, indicates that the getpgrp routine is
+ * available to get the current process group.
+ */
+/* USE_BSD_GETPGRP:
+ * This symbol, if defined, indicates that getpgrp needs one
+ * arguments whereas USG one needs none.
+ */
+/*#define HAS_GETPGRP /**/
+/*#define USE_BSD_GETPGRP /**/
+
/* HAS_GETPROTOBYNAME:
* This symbol, if defined, indicates that the getprotobyname()
* routine is available to look up protocols by their name.
#define HAS_GETPROTOBYNAME /**/
#define HAS_GETPROTOBYNUMBER /**/
+/* HAS_GETPROTO_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getprotoent(), getprotobyname(), and
+ * getprotobyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define HAS_GETPROTO_PROTOS /**/
+
+/* HAS_GETPRPWNAM:
+ * This symbol, if defined, indicates that the getprpwnam system call is
+ * available to retrieve protected (shadow) password entries by name.
+ */
+/*#define HAS_GETPRPWNAM /**/
+
/* HAS_GETPWENT:
* This symbol, if defined, indicates that the getpwent routine is
* available for sequential access of the passwd database.
*/
/*#define HAS_GETSERVENT /**/
+/* HAS_GETSERV_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getservent(), getservbyname(), and
+ * getservbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define HAS_GETSERV_PROTOS /**/
+
+/* HAS_GETSPNAM:
+ * This symbol, if defined, indicates that the getspnam system call is
+ * available to retrieve SysV shadow password entries by name.
+ */
+/*#define HAS_GETSPNAM /**/
+
/* HAS_GETSERVBYNAME:
* This symbol, if defined, indicates that the getservbyname()
* routine is available to look up services by their name.
#define HAS_GETSERVBYNAME /**/
#define HAS_GETSERVBYPORT /**/
+/* HAS_GNULIBC:
+ * This symbol, if defined, indicates to the C program that
+ * the GNU C library is being used.
+ */
+/*#define HAS_GNULIBC /**/
+#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
+# define _GNU_SOURCE
+#endif
+/* HAS_HASMNTOPT:
+ * This symbol, if defined, indicates that the hasmntopt routine is
+ * available to query the mount options of file systems.
+ */
+/*#define HAS_HASMNTOPT /**/
+
/* HAS_HTONL:
* This symbol, if defined, indicates that the htonl() routine (and
* friends htons() ntohl() ntohs()) are available to do network
* friends htonl() htons() ntohl()) are available to do network
* order byte swapping.
*/
-#define HAS_HTONL /**/
-#define HAS_HTONS /**/
-#define HAS_NTOHL /**/
-#define HAS_NTOHS /**/
+#define HAS_HTONL /**/
+#define HAS_HTONS /**/
+#define HAS_NTOHL /**/
+#define HAS_NTOHS /**/
+
+/* HAS_ICONV:
+ * This symbol, if defined, indicates that the iconv routine is
+ * available to do character set conversions.
+ */
+/*#define HAS_ICONV /**/
+
+/* HAS_INT64_T:
+ * This symbol will defined if the C compiler supports int64_t.
+ * Usually the <inttypes.h> needs to be included, but sometimes
+ * <sys/types.h> is enough.
+ */
+/*#define HAS_INT64_T /**/
+
+/* HAS_ISASCII:
+ * This manifest constant lets the C program know that isascii
+ * is available.
+ */
+#define HAS_ISASCII /**/
+
+/* HAS_ISNAN:
+ * This symbol, if defined, indicates that the isnan routine is
+ * available to check whether a double is a NaN.
+ */
+#define HAS_ISNAN /**/
+
+/* HAS_ISNANL:
+ * This symbol, if defined, indicates that the isnanl routine is
+ * available to check whether a long double is a NaN.
+ */
+/*#define HAS_ISNANL /**/
+
+/* HAS_LCHOWN:
+ * This symbol, if defined, indicates that the lchown routine is
+ * available to operate on a symbolic link (instead of following the
+ * link).
+ */
+/*#define HAS_LCHOWN /**/
+
+/* HAS_LDBL_DIG:
+ * This symbol, if defined, indicates that this system's <float.h>
+ * or <limits.h> defines the symbol LDBL_DIG, which is the number
+ * of significant digits in a long double precision number. Unlike
+ * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
+ */
+#define HAS_LDBL_DIG /**/
/* HAS_LONG_DOUBLE:
* This symbol will be defined if the C compiler supports long
#define LONGLONGSIZE 8 /**/
#endif
-/* HAS_MEMCHR:
- * This symbol, if defined, indicates that the memchr routine is available
- * to locate characters within a C string.
- */
-#define HAS_MEMCHR /**/
-
-/* HAS_MSG:
- * This symbol, if defined, indicates that the entire msg*(2) library is
- * supported (IPC mechanism based on message queues).
- */
-/*#define HAS_MSG /**/
-
-/* HAS_SEM:
- * This symbol, if defined, indicates that the entire sem*(2) library is
- * supported.
+/* HAS_LSEEK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the lseek() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern off_t lseek(int, off_t, int);
*/
-/*#define HAS_SEM /**/
+#define HAS_LSEEK_PROTO /**/
-/* HAS_SETGRENT:
- * This symbol, if defined, indicates that the setgrent routine is
- * available for initializing sequential access of the group database.
+/* HAS_MADVISE:
+ * This symbol, if defined, indicates that the madvise system call is
+ * available to map a file into memory.
*/
-/*#define HAS_SETGRENT /**/
+/*#define HAS_MADVISE /**/
-/* HAS_SETGROUPS:
- * This symbol, if defined, indicates that the setgroups() routine is
- * available to set the list of process groups. If unavailable, multiple
- * groups are probably not supported.
+/* HAS_MEMCHR:
+ * This symbol, if defined, indicates that the memchr routine is available
+ * to locate characters within a C string.
*/
-/*#define HAS_SETGROUPS /**/
+#define HAS_MEMCHR /**/
-/* HAS_SETHOSTENT:
- * This symbol, if defined, indicates that the sethostent() routine is
- * available.
+/* HAS_MKDTEMP:
+ * This symbol, if defined, indicates that the mkdtemp routine is
+ * available to exclusively create a uniquely named temporary directory.
*/
-/*#define HAS_SETHOSTENT /**/
+/*#define HAS_MKDTEMP /**/
-/* HAS_SETNETENT:
- * This symbol, if defined, indicates that the setnetent() routine is
- * available.
+/* HAS_MKSTEMP:
+ * This symbol, if defined, indicates that the mkstemp routine is
+ * available to exclusively create and open a uniquely named
+ * temporary file.
*/
-/*#define HAS_SETNETENT /**/
+/*#define HAS_MKSTEMP /**/
-/* HAS_SETPROTOENT:
- * This symbol, if defined, indicates that the setprotoent() routine is
- * available.
+/* HAS_MKSTEMPS:
+ * This symbol, if defined, indicates that the mkstemps routine is
+ * available to excluslvely create and open a uniquely named
+ * (with a suffix) temporary file.
*/
-/*#define HAS_SETPROTOENT /**/
+/*#define HAS_MKSTEMPS /**/
-/* HAS_SETPWENT:
- * This symbol, if defined, indicates that the setpwent routine is
- * available for initializing sequential access of the passwd database.
+/* HAS_MMAP:
+ * This symbol, if defined, indicates that the mmap system call is
+ * available to map a file into memory.
*/
-/*#define HAS_SETPWENT /**/
-
-/* HAS_SETSERVENT:
- * This symbol, if defined, indicates that the setservent() routine is
- * available.
+/* Mmap_t:
+ * This symbol holds the return type of the mmap() system call
+ * (and simultaneously the type of the first argument).
+ * Usually set to 'void *' or 'cadd_t'.
*/
-/*#define HAS_SETSERVENT /**/
+/*#define HAS_MMAP /**/
+#define Mmap_t void * /**/
-/* HAS_SETVBUF:
- * This symbol, if defined, indicates that the setvbuf routine is
- * available to change buffering on an open stdio stream.
- * to a line-buffered mode.
+/* HAS_MODFL:
+ * This symbol, if defined, indicates that the modfl routine is
+ * available to split a long double x into a fractional part f and
+ * an integer part i such that |f| < 1.0 and (f + i) = x.
*/
-#define HAS_SETVBUF /**/
-
-/* HAS_SHM:
- * This symbol, if defined, indicates that the entire shm*(2) library is
- * supported.
+/* HAS_MODFL_POW32_BUG:
+ * This symbol, if defined, indicates that the modfl routine is
+ * broken for long doubles >= pow(2, 32).
+ * For example from 4294967303.150000 one would get 4294967302.000000
+ * and 1.150000. The bug has been seen in certain versions of glibc,
+ * release 2.2.2 is known to be okay.
*/
-/*#define HAS_SHM /**/
+/*#define HAS_MODFL /**/
+/*#define HAS_MODFL_POW32_BUG /**/
-/* HAS_SOCKET:
- * This symbol, if defined, indicates that the BSD socket interface is
- * supported.
- */
-/* HAS_SOCKETPAIR:
- * This symbol, if defined, indicates that the BSD socketpair() call is
- * supported.
- */
-/* HAS_MSG_CTRUNC:
- * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_DONTROUTE:
- * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_OOB:
- * This symbol, if defined, indicates that the MSG_OOB is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_PEEK:
- * This symbol, if defined, indicates that the MSG_PEEK is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_PROXY:
- * This symbol, if defined, indicates that the MSG_PROXY is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_SCM_RIGHTS:
- * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
+/* HAS_MPROTECT:
+ * This symbol, if defined, indicates that the mprotect system call is
+ * available to modify the access protection of a memory mapped file.
*/
-#define HAS_SOCKET /**/
-/*#define HAS_SOCKETPAIR /**/
-/*#define HAS_MSG_CTRUNC /**/
-/*#define HAS_MSG_DONTROUTE /**/
-/*#define HAS_MSG_OOB /**/
-/*#define HAS_MSG_PEEK /**/
-/*#define HAS_MSG_PROXY /**/
-/*#define HAS_SCM_RIGHTS /**/
+/*#define HAS_MPROTECT /**/
-/* USE_STAT_BLOCKS:
- * This symbol is defined if this system has a stat structure declaring
- * st_blksize and st_blocks.
+/* HAS_MSG:
+ * This symbol, if defined, indicates that the entire msg*(2) library is
+ * supported (IPC mechanism based on message queues).
*/
-#ifndef USE_STAT_BLOCKS
-/*#define USE_STAT_BLOCKS /**/
-#endif
+/*#define HAS_MSG /**/
-/* HAS_STRERROR:
- * This symbol, if defined, indicates that the strerror routine is
- * available to translate error numbers to strings. See the writeup
- * of Strerror() in this file before you try to define your own.
- */
-/* HAS_SYS_ERRLIST:
- * This symbol, if defined, indicates that the sys_errlist array is
- * available to translate error numbers to strings. The extern int
- * sys_nerr gives the size of that table.
- */
-/* Strerror:
- * This preprocessor symbol is defined as a macro if strerror() is
- * not available to translate error numbers to strings but sys_errlist[]
- * array is there.
+/* HAS_STRUCT_MSGHDR:
+ * This symbol, if defined, indicates that the struct msghdr
+ * is supported.
*/
-#define HAS_STRERROR /**/
-#define HAS_SYS_ERRLIST /**/
-#define Strerror(e) strerror(e)
+/*#define HAS_STRUCT_MSGHDR /**/
-/* HAS_UNION_SEMUN:
- * This symbol, if defined, indicates that the union semun is
- * defined by including <sys/sem.h>. If not, the user code
- * probably needs to define it as:
- * union semun {
- * int val;
- * struct semid_ds *buf;
- * unsigned short *array;
- * }
- */
-/* USE_SEMCTL_SEMUN:
- * This symbol, if defined, indicates that union semun is
- * used for semctl IPC_STAT.
- */
-/* USE_SEMCTL_SEMID_DS:
- * This symbol, if defined, indicates that struct semid_ds * is
- * used for semctl IPC_STAT.
+/* HAS_OFF64_T:
+ * This symbol will be defined if the C compiler supports off64_t.
*/
-#define HAS_UNION_SEMUN /**/
-/*#define USE_SEMCTL_SEMUN /**/
-/*#define USE_SEMCTL_SEMID_DS /**/
+/*#define HAS_OFF64_T /**/
-/* HAS_VFORK:
- * This symbol, if defined, indicates that vfork() exists.
+/* HAS_OPEN3:
+ * This manifest constant lets the C program know that the three
+ * argument form of open(2) is available.
*/
-/*#define HAS_VFORK /**/
+/*#define HAS_OPEN3 /**/
-/* Signal_t:
- * This symbol's value is either "void" or "int", corresponding to the
- * appropriate return type of a signal handler. Thus, you can declare
- * a signal handler using "Signal_t (*handler)()", and define the
- * handler using "Signal_t handler(sig)".
+/* OLD_PTHREAD_CREATE_JOINABLE:
+ * This symbol, if defined, indicates how to create pthread
+ * in joinable (aka undetached) state. NOTE: not defined
+ * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ * (the new version of the constant).
+ * If defined, known values are PTHREAD_CREATE_UNDETACHED
+ * and __UNDETACHED.
*/
-#define Signal_t void /* Signal handler's return type */
+/*#define OLD_PTHREAD_CREATE_JOINABLE /**/
-/* Groups_t:
- * This symbol holds the type used for the second argument to
- * getgroups() and setgropus(). Usually, this is the same as
- * gidtype (gid_t) , but sometimes it isn't.
- * It can be int, ushort, uid_t, etc...
- * It may be necessary to include <sys/types.h> to get any
- * typedef'ed information. This is only required if you have
- * getgroups() or setgropus()..
+/* HAS_PTHREAD_YIELD:
+ * This symbol, if defined, indicates that the pthread_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
*/
-#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
-#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
-#endif
-
-/* I_GRP:
- * This symbol, if defined, indicates to the C program that it should
- * include <grp.h>.
+/* SCHED_YIELD:
+ * This symbol defines the way to yield the execution of
+ * the current thread. Known ways are sched_yield,
+ * pthread_yield, and pthread_yield with NULL.
*/
-/* GRPASSWD:
- * This symbol, if defined, indicates to the C program that struct group
- * in <grp.h> contains gr_passwd.
+/* HAS_SCHED_YIELD:
+ * This symbol, if defined, indicates that the sched_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
*/
-/*#define I_GRP /**/
-/*#define GRPASSWD /**/
+/*#define HAS_PTHREAD_YIELD /**/
+#define SCHED_YIELD /**/
+/*#define HAS_SCHED_YIELD /**/
-/* I_NETDB:
- * This symbol, if defined, indicates that <netdb.h> exists and
- * should be included.
+/* HAS_READV:
+ * This symbol, if defined, indicates that the readv routine is
+ * available to do gather reads. You will also need <sys/uio.h>
+ * and there I_SYSUIO.
*/
-/*#define I_NETDB /**/
+/*#define HAS_READV /**/
-/* I_PWD:
- * This symbol, if defined, indicates to the C program that it should
- * include <pwd.h>.
- */
-/* PWQUOTA:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_quota.
- */
-/* PWAGE:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_age.
- */
-/* PWCHANGE:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_change.
- */
-/* PWCLASS:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_class.
- */
-/* PWEXPIRE:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_expire.
- */
-/* PWCOMMENT:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_comment.
- */
-/* PWGECOS:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_gecos.
+/* HAS_RECVMSG:
+ * This symbol, if defined, indicates that the recvmsg routine is
+ * available to send structured socket messages.
*/
-/* PWPASSWD:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_passwd.
+/*#define HAS_RECVMSG /**/
+
+/* HAS_SAFE_BCOPY:
+ * This symbol, if defined, indicates that the bcopy routine is available
+ * to copy potentially overlapping memory blocks. Normally, you should
+ * probably use memmove() or memcpy(). If neither is defined, roll your
+ * own version.
*/
-/*#define I_PWD /**/
-/*#define PWQUOTA /**/
-/*#define PWAGE /**/
-/*#define PWCHANGE /**/
-/*#define PWCLASS /**/
-/*#define PWEXPIRE /**/
-/*#define PWCOMMENT /**/
-/*#define PWGECOS /**/
-/*#define PWPASSWD /**/
+/*#define HAS_SAFE_BCOPY /**/
-/* I_SYSUIO:
- * This symbol, if defined, indicates that <sys/uio.h> exists and
- * should be included.
+/* HAS_SAFE_MEMCPY:
+ * This symbol, if defined, indicates that the memcpy routine is available
+ * to copy potentially overlapping memory blocks. If you need to
+ * copy overlapping memory blocks, you should check HAS_MEMMOVE and
+ * use memmove() instead, if available.
*/
-/*#define I_SYSUIO /**/
+/*#define HAS_SAFE_MEMCPY /**/
-/* Free_t:
- * This variable contains the return type of free(). It is usually
- * void, but occasionally int.
+/* HAS_SANE_MEMCMP:
+ * This symbol, if defined, indicates that the memcmp routine is available
+ * and can be used to compare relative magnitudes of chars with their high
+ * bits set. If it is not defined, roll your own version.
*/
-/* Malloc_t:
- * This symbol is the type of pointer returned by malloc and realloc.
+#define HAS_SANE_MEMCMP /**/
+
+/* HAS_SBRK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the sbrk() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern void* sbrk _((int));
+ * extern void* sbrk _((size_t));
*/
-#define Malloc_t void * /**/
-#define Free_t void /**/
+/*#define HAS_SBRK_PROTO /**/
-/* MYMALLOC:
- * This symbol, if defined, indicates that we're using our own malloc.
+/* HAS_SEM:
+ * This symbol, if defined, indicates that the entire sem*(2) library is
+ * supported.
*/
-/*#define MYMALLOC /**/
+/*#define HAS_SEM /**/
-/* SIG_NAME:
- * This symbol contains a list of signal names in order of
- * signal number. This is intended
- * to be used as a static array initialization, like this:
- * char *sig_name[] = { SIG_NAME };
- * The signals in the list are separated with commas, and each signal
- * is surrounded by double quotes. There is no leading SIG in the signal
- * name, i.e. SIGQUIT is known as "QUIT".
- * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
- * etc., where nn is the actual signal number (e.g. NUM37).
- * The signal number for sig_name[i] is stored in sig_num[i].
- * The last element is 0 to terminate the list with a NULL. This
- * corresponds to the 0 at the end of the sig_num list.
+/* HAS_SENDMSG:
+ * This symbol, if defined, indicates that the sendmsg routine is
+ * available to send structured socket messages.
*/
-/* SIG_NUM:
- * This symbol contains a list of signal numbers, in the same order as the
- * SIG_NAME list. It is suitable for static array initialization, as in:
- * int sig_num[] = { SIG_NUM };
- * The signals in the list are separated with commas, and the indices
- * within that list and the SIG_NAME list match, so it's easy to compute
- * the signal name from a number or vice versa at the price of a small
- * dynamic linear lookup.
- * Duplicates are allowed, but are moved to the end of the list.
- * The signal number corresponding to sig_name[i] is sig_number[i].
- * if (i < NSIG) then sig_number[i] == i.
- * The last element is 0, corresponding to the 0 at the end of
- * the sig_name list.
+/*#define HAS_SENDMSG /**/
+
+/* HAS_SETGRENT:
+ * This symbol, if defined, indicates that the setgrent routine is
+ * available for initializing sequential access of the group database.
*/
-#define SIG_NAME "ZERO", "NUM01", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "NUM16", "NUM17", "NUM18", "NUM19", "CHLD", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0 /**/
-#define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0 /**/
+/*#define HAS_SETGRENT /**/
-/* VOIDFLAGS:
- * This symbol indicates how much support of the void type is given by this
- * compiler. What various bits mean:
- *
- * 1 = supports declaration of void
- * 2 = supports arrays of pointers to functions returning void
- * 4 = supports comparisons between pointers to void functions and
- * addresses of void functions
- * 8 = suports declaration of generic void pointers
- *
- * The package designer should define VOIDUSED to indicate the requirements
- * of the package. This can be done either by #defining VOIDUSED before
- * including config.h, or by defining defvoidused in Myinit.U. If the
- * latter approach is taken, only those flags will be tested. If the
- * level of void support necessary is not present, defines void to int.
+/* HAS_SETGROUPS:
+ * This symbol, if defined, indicates that the setgroups() routine is
+ * available to set the list of process groups. If unavailable, multiple
+ * groups are probably not supported.
*/
-#ifndef VOIDUSED
-#define VOIDUSED 15
-#endif
-#define VOIDFLAGS 15
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int /* is void to be avoided? */
-#define M_VOID /* Xenix strikes again */
-#endif
+/*#define HAS_SETGROUPS /**/
-/* HAS_ATOLF:
- * This symbol, if defined, indicates that the atolf routine is
- * available to convert strings into long doubles.
+/* HAS_SETHOSTENT:
+ * This symbol, if defined, indicates that the sethostent() routine is
+ * available.
*/
-/*#define HAS_ATOLF /**/
+/*#define HAS_SETHOSTENT /**/
-/* HAS_ATOLL:
- * This symbol, if defined, indicates that the atoll routine is
- * available to convert strings into long longs.
+/* HAS_SETITIMER:
+ * This symbol, if defined, indicates that the setitimer routine is
+ * available to set interval timers.
*/
-/*#define HAS_ATOLL /**/
+/*#define HAS_SETITIMER /**/
-/* PERL_BINCOMPAT_5005:
- * This symbol, if defined, indicates that Perl 5.006 should be
- * binary-compatible with Perl 5.005. This is impossible for builds
- * that use features like threads and multiplicity it is always undef
- * for those versions.
+/* HAS_SETNETENT:
+ * This symbol, if defined, indicates that the setnetent() routine is
+ * available.
*/
-/*#define PERL_BINCOMPAT_5005 /**/
+/*#define HAS_SETNETENT /**/
-/* DLSYM_NEEDS_UNDERSCORE:
- * This symbol, if defined, indicates that we need to prepend an
- * underscore to the symbol name before calling dlsym(). This only
- * makes sense if you *have* dlsym, which we will presume is the
- * case if you're using dl_dlopen.xs.
+/* HAS_SETPROTOENT:
+ * This symbol, if defined, indicates that the setprotoent() routine is
+ * available.
*/
-/*#define DLSYM_NEEDS_UNDERSCORE /**/
+/*#define HAS_SETPROTOENT /**/
-/* HAS_ENDSPENT:
- * This symbol, if defined, indicates that the endspent system call is
- * available to finalize the scan of SysV shadow password entries.
+/* HAS_SETPGRP:
+ * This symbol, if defined, indicates that the setpgrp routine is
+ * available to set the current process group.
+ */
+/* USE_BSD_SETPGRP:
+ * This symbol, if defined, indicates that setpgrp needs two
+ * arguments whereas USG one needs none. See also HAS_SETPGID
+ * for a POSIX interface.
*/
-/*#define HAS_ENDSPENT /**/
+/*#define HAS_SETPGRP /**/
+/*#define USE_BSD_SETPGRP /**/
-/* HAS_STRUCT_FS_DATA:
- * This symbol, if defined, indicates that the struct fs_data
- * to do statfs() is supported.
+/* HAS_SETPROCTITLE:
+ * This symbol, if defined, indicates that the setproctitle routine is
+ * available to set process title.
*/
-/*#define HAS_STRUCT_FS_DATA /**/
+/*#define HAS_SETPROCTITLE /**/
-/* HAS_FSEEKO:
- * This symbol, if defined, indicates that the fseeko routine is
- * available to fseek beyond 32 bits (useful for ILP32 hosts).
+/* HAS_SETPWENT:
+ * This symbol, if defined, indicates that the setpwent routine is
+ * available for initializing sequential access of the passwd database.
*/
-/*#define HAS_FSEEKO /**/
+/*#define HAS_SETPWENT /**/
-/* HAS_FSTATFS:
- * This symbol, if defined, indicates that the fstatfs routine is
- * available to stat filesystems by file descriptors.
+/* HAS_SETSERVENT:
+ * This symbol, if defined, indicates that the setservent() routine is
+ * available.
*/
-/*#define HAS_FSTATFS /**/
-/* HAS_FTELLO:
- * This symbol, if defined, indicates that the ftello routine is
- * available to ftell beyond 32 bits (useful for ILP32 hosts).
+/*#define HAS_SETSERVENT /**/
+
+/* HAS_SETVBUF:
+ * This symbol, if defined, indicates that the setvbuf routine is
+ * available to change buffering on an open stdio stream.
+ * to a line-buffered mode.
*/
-/*#define HAS_FTELLO /**/
+#define HAS_SETVBUF /**/
-/* HAS_GETMNT:
- * This symbol, if defined, indicates that the getmnt routine is
- * available to get filesystem mount info by filename.
+/* USE_SFIO:
+ * This symbol, if defined, indicates that sfio should
+ * be used.
*/
-/*#define HAS_GETMNT /**/
+/*#define USE_SFIO /**/
-/* HAS_GETMNTENT:
- * This symbol, if defined, indicates that the getmntent routine is
- * available to iterate through mounted file systems to get their info.
+/* HAS_SHM:
+ * This symbol, if defined, indicates that the entire shm*(2) library is
+ * supported.
*/
-/*#define HAS_GETMNTENT /**/
+/*#define HAS_SHM /**/
-/* HAS_GETSPENT:
- * This symbol, if defined, indicates that the getspent system call is
- * available to retrieve SysV shadow password entries sequentially.
+/* HAS_SIGACTION:
+ * This symbol, if defined, indicates that Vr4's sigaction() routine
+ * is available.
*/
-/*#define HAS_GETSPENT /**/
+/*#define HAS_SIGACTION /**/
-/* HAS_GETSPNAM:
- * This symbol, if defined, indicates that the getspnam system call is
- * available to retrieve SysV shadow password entries by name.
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
*/
-/*#define HAS_GETSPNAM /**/
+/* Sigjmp_buf:
+ * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ * This macro is used in the same way as sigsetjmp(), but will invoke
+ * traditional setjmp() if sigsetjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+/* Siglongjmp:
+ * This macro is used in the same way as siglongjmp(), but will invoke
+ * traditional longjmp() if siglongjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+/*#define HAS_SIGSETJMP /**/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
+#endif
-/* HAS_HASMNTOPT:
- * This symbol, if defined, indicates that the hasmntopt routine is
- * available to query the mount options of file systems.
+/* HAS_SOCKET:
+ * This symbol, if defined, indicates that the BSD socket interface is
+ * supported.
+ */
+/* HAS_SOCKETPAIR:
+ * This symbol, if defined, indicates that the BSD socketpair() call is
+ * supported.
+ */
+/* HAS_MSG_CTRUNC:
+ * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_DONTROUTE:
+ * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_OOB:
+ * This symbol, if defined, indicates that the MSG_OOB is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
*/
-/*#define HAS_HASMNTOPT /**/
-
-/* HAS_INT64_T:
- * This symbol will defined if the C compiler supports int64_t.
- * Usually the <inttypes.h> needs to be included, but sometimes
- * <sys/types.h> is enough.
+/* HAS_MSG_PEEK:
+ * This symbol, if defined, indicates that the MSG_PEEK is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
*/
-/*#define HAS_INT64_T /**/
-
-/* HAS_LDBL_DIG:
- * This symbol, if defined, indicates that this system's <float.h>
- * or <limits.h> defines the symbol LDBL_DIG, which is the number
- * of significant digits in a long double precision number. Unlike
- * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
+/* HAS_MSG_PROXY:
+ * This symbol, if defined, indicates that the MSG_PROXY is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
*/
-#define HAS_LDBL_DIG /**/
-
-/* HAS_SETSPENT:
- * This symbol, if defined, indicates that the setspent system call is
- * available to initialize the scan of SysV shadow password entries.
+/* HAS_SCM_RIGHTS:
+ * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
*/
-/*#define HAS_SETSPENT /**/
+#define HAS_SOCKET /**/
+/*#define HAS_SOCKETPAIR /**/
+/*#define HAS_MSG_CTRUNC /**/
+/*#define HAS_MSG_DONTROUTE /**/
+/*#define HAS_MSG_OOB /**/
+/*#define HAS_MSG_PEEK /**/
+/*#define HAS_MSG_PROXY /**/
+/*#define HAS_SCM_RIGHTS /**/
-/* USE_SFIO:
- * This symbol, if defined, indicates that sfio should
- * be used.
+/* HAS_SOCKS5_INIT:
+ * This symbol, if defined, indicates that the socks5_init routine is
+ * available to initialize SOCKS 5.
*/
-/*#define USE_SFIO /**/
+/*#define HAS_SOCKS5_INIT /**/
/* HAS_SQRTL:
* This symbol, if defined, indicates that the sqrtl routine is
*/
/*#define HAS_SQRTL /**/
+/* USE_STAT_BLOCKS:
+ * This symbol is defined if this system has a stat structure declaring
+ * st_blksize and st_blocks.
+ */
+#ifndef USE_STAT_BLOCKS
+/*#define USE_STAT_BLOCKS /**/
+#endif
+
/* HAS_STRUCT_STATFS_F_FLAGS:
* This symbol, if defined, indicates that the struct statfs
* does have the f_flags member containing the mount flags of
*/
/*#define HAS_FSTATVFS /**/
+/* USE_STDIO_PTR:
+ * This symbol is defined if the _ptr and _cnt fields (or similar)
+ * of the stdio FILE structure can be used to access the stdio buffer
+ * for a file handle. If this is defined, then the FILE_ptr(fp)
+ * and FILE_cnt(fp) macros will also be defined and should be used
+ * to access these fields.
+ */
+/* FILE_ptr:
+ * This macro is used to access the _ptr field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_PTR_LVALUE:
+ * This symbol is defined if the FILE_ptr macro can be used as an
+ * lvalue.
+ */
+/* FILE_cnt:
+ * This macro is used to access the _cnt field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_CNT_LVALUE:
+ * This symbol is defined if the FILE_cnt macro can be used as an
+ * lvalue.
+ */
+/* STDIO_PTR_LVAL_SETS_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n has the side effect of decreasing the
+ * value of File_cnt(fp) by n.
+ */
+/* STDIO_PTR_LVAL_NOCHANGE_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n leaves File_cnt(fp) unchanged.
+ */
+#define USE_STDIO_PTR /**/
+#ifdef USE_STDIO_PTR
+#define FILE_ptr(fp) ((fp)->_ptr)
+#define STDIO_PTR_LVALUE /**/
+#define FILE_cnt(fp) ((fp)->_cnt)
+#define STDIO_CNT_LVALUE /**/
+/*#define STDIO_PTR_LVAL_SETS_CNT /**/
+#define STDIO_PTR_LVAL_NOCHANGE_CNT /**/
+#endif
+
+/* USE_STDIO_BASE:
+ * This symbol is defined if the _base field (or similar) of the
+ * stdio FILE structure can be used to access the stdio buffer for
+ * a file handle. If this is defined, then the FILE_base(fp) macro
+ * will also be defined and should be used to access this field.
+ * Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ * to determine the number of bytes in the buffer. USE_STDIO_BASE
+ * will never be defined unless USE_STDIO_PTR is.
+ */
+/* FILE_base:
+ * This macro is used to access the _base field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_BASE is defined.
+ */
+/* FILE_bufsiz:
+ * This macro is used to determine the number of bytes in the I/O
+ * buffer pointed to by _base field (or equivalent) of the FILE
+ * structure pointed to its argument. This macro will always be defined
+ * if USE_STDIO_BASE is defined.
+ */
+#define USE_STDIO_BASE /**/
+#ifdef USE_STDIO_BASE
+#define FILE_base(fp) ((fp)->_base)
+#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
+#endif
+
+/* HAS_STRERROR:
+ * This symbol, if defined, indicates that the strerror routine is
+ * available to translate error numbers to strings. See the writeup
+ * of Strerror() in this file before you try to define your own.
+ */
+/* HAS_SYS_ERRLIST:
+ * This symbol, if defined, indicates that the sys_errlist array is
+ * available to translate error numbers to strings. The extern int
+ * sys_nerr gives the size of that table.
+ */
+/* Strerror:
+ * This preprocessor symbol is defined as a macro if strerror() is
+ * not available to translate error numbers to strings but sys_errlist[]
+ * array is there.
+ */
+#define HAS_STRERROR /**/
+#define HAS_SYS_ERRLIST /**/
+#define Strerror(e) strerror(e)
+
+/* HAS_STRTOLD:
+ * This symbol, if defined, indicates that the strtold routine is
+ * available to convert strings to long doubles.
+ */
+/*#define HAS_STRTOLD /**/
+
+/* HAS_STRTOLL:
+ * This symbol, if defined, indicates that the strtoll routine is
+ * available to convert strings to long longs.
+ */
+/*#define HAS_STRTOLL /**/
+
+/* HAS_STRTOQ:
+ * This symbol, if defined, indicates that the strtoq routine is
+ * available to convert strings to long longs (quads).
+ */
+/*#define HAS_STRTOQ /**/
+
+/* HAS_STRTOUL:
+ * This symbol, if defined, indicates that the strtoul routine is
+ * available to provide conversion of strings to unsigned long.
+ */
+#define HAS_STRTOUL /**/
+
+/* HAS_STRTOULL:
+ * This symbol, if defined, indicates that the strtoull routine is
+ * available to convert strings to unsigned long longs.
+ */
+/*#define HAS_STRTOULL /**/
+
+/* HAS_STRTOUQ:
+ * This symbol, if defined, indicates that the strtouq routine is
+ * available to convert strings to unsigned long longs (quads).
+ */
+/*#define HAS_STRTOUQ /**/
+
/* HAS_TELLDIR_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the telldir() function. Otherwise, it is up
*/
#define HAS_TELLDIR_PROTO /**/
+/* Time_t:
+ * This symbol holds the type returned by time(). It can be long,
+ * or time_t on BSD sites (in which case <sys/types.h> should be
+ * included).
+ */
+#define Time_t time_t /* Time type */
+
+/* HAS_TIMES:
+ * This symbol, if defined, indicates that the times() routine exists.
+ * Note that this became obsolete on some systems (SUNOS), which now
+ * use getrusage(). It may be necessary to include <sys/times.h>.
+ */
+#define HAS_TIMES /**/
+
+/* HAS_UALARM:
+ * This symbol, if defined, indicates that the ualarm routine is
+ * available to do alarms with microsecond granularity.
+ */
+/*#define HAS_UALARM /**/
+
+/* HAS_UNION_SEMUN:
+ * This symbol, if defined, indicates that the union semun is
+ * defined by including <sys/sem.h>. If not, the user code
+ * probably needs to define it as:
+ * union semun {
+ * int val;
+ * struct semid_ds *buf;
+ * unsigned short *array;
+ * }
+ */
+/* USE_SEMCTL_SEMUN:
+ * This symbol, if defined, indicates that union semun is
+ * used for semctl IPC_STAT.
+ */
+/* USE_SEMCTL_SEMID_DS:
+ * This symbol, if defined, indicates that struct semid_ds * is
+ * used for semctl IPC_STAT.
+ */
+#define HAS_UNION_SEMUN /**/
+/*#define USE_SEMCTL_SEMUN /**/
+/*#define USE_SEMCTL_SEMID_DS /**/
+
/* HAS_USTAT:
* This symbol, if defined, indicates that the ustat system call is
* available to query file system statistics by dev_t.
*/
/*#define HAS_USTAT /**/
+/* HAS_VFORK:
+ * This symbol, if defined, indicates that vfork() exists.
+ */
+/*#define HAS_VFORK /**/
+
+/* Signal_t:
+ * This symbol's value is either "void" or "int", corresponding to the
+ * appropriate return type of a signal handler. Thus, you can declare
+ * a signal handler using "Signal_t (*handler)()", and define the
+ * handler using "Signal_t handler(sig)".
+ */
+#define Signal_t void /* Signal handler's return type */
+
+/* HAS_VPRINTF:
+ * This symbol, if defined, indicates that the vprintf routine is available
+ * to printf with a pointer to an argument list. If unavailable, you
+ * may need to write your own, probably in terms of _doprnt().
+ */
+/* USE_CHAR_VSPRINTF:
+ * This symbol is defined if this system has vsprintf() returning type
+ * (char*). The trend seems to be to declare it as "int vsprintf()". It
+ * is up to the package author to declare vsprintf correctly based on the
+ * symbol.
+ */
+#define HAS_VPRINTF /**/
+/*#define USE_CHAR_VSPRINTF /**/
+
+/* HAS_WRITEV:
+ * This symbol, if defined, indicates that the writev routine is
+ * available to do scatter writes.
+ */
+/*#define HAS_WRITEV /**/
+
/* USE_DYNAMIC_LOADING:
* This symbol, if defined, indicates that dynamic loading of
* some sort is available.
*/
-#define USE_DYNAMIC_LOADING /**/
+#define USE_DYNAMIC_LOADING /**/
+
+/* DOUBLESIZE:
+ * This symbol contains the size of a double, so that the C preprocessor
+ * can make decisions based on it.
+ */
+#define DOUBLESIZE 8 /**/
+
+/* EBCDIC:
+ * This symbol, if defined, indicates that this system uses
+ * EBCDIC encoding.
+ */
+/*#define EBCDIC /**/
+
+/* FFLUSH_NULL:
+ * This symbol, if defined, tells that fflush(NULL) does flush
+ * all pending stdio output.
+ */
+/* FFLUSH_ALL:
+ * This symbol, if defined, tells that to flush
+ * all pending stdio output one must loop through all
+ * the stdio file handles stored in an array and fflush them.
+ * Note that if fflushNULL is defined, fflushall will not
+ * even be probed for and will be left undefined.
+ */
+#define FFLUSH_NULL /**/
+/*#define FFLUSH_ALL /**/
+
+/* Fpos_t:
+ * This symbol holds the type used to declare file positions in libc.
+ * It can be fpos_t, long, uint, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Fpos_t fpos_t /* File position type */
+
+/* Gid_t_f:
+ * This symbol defines the format string used for printing a Gid_t.
+ */
+#define Gid_t_f "ld" /**/
+
+/* Gid_t_sign:
+ * This symbol holds the signedess of a Gid_t.
+ * 1 for unsigned, -1 for signed.
+ */
+#define Gid_t_sign -1 /* GID sign */
+
+/* Gid_t_size:
+ * This symbol holds the size of a Gid_t in bytes.
+ */
+#define Gid_t_size 4 /* GID size */
-/* FFLUSH_NULL:
- * This symbol, if defined, tells that fflush(NULL) does flush
- * all pending stdio output.
+/* Gid_t:
+ * This symbol holds the return type of getgid() and the type of
+ * argument to setrgid() and related functions. Typically,
+ * it is the type of group ids in the kernel. It can be int, ushort,
+ * gid_t, etc... It may be necessary to include <sys/types.h> to get
+ * any typedef'ed information.
*/
-/* FFLUSH_ALL:
- * This symbol, if defined, tells that to flush
- * all pending stdio output one must loop through all
- * the stdio file handles stored in an array and fflush them.
- * Note that if fflushNULL is defined, fflushall will not
- * even be probed for and will be left undefined.
+#define Gid_t gid_t /* Type for getgid(), etc... */
+
+/* Groups_t:
+ * This symbol holds the type used for the second argument to
+ * getgroups() and setgroups(). Usually, this is the same as
+ * gidtype (gid_t) , but sometimes it isn't.
+ * It can be int, ushort, gid_t, etc...
+ * It may be necessary to include <sys/types.h> to get any
+ * typedef'ed information. This is only required if you have
+ * getgroups() or setgroups()..
*/
-#define FFLUSH_NULL /**/
-/*#define FFLUSH_ALL /**/
+#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
+#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
+#endif
/* DB_Prefix_t:
* This symbol contains the type of the prefix structure element
* in the <db.h> header file. In older versions of DB, it was
* int, while in newer ones it is size_t.
*/
+/* DB_VERSION_MAJOR_CFG:
+ * This symbol, if defined, defines the major version number of
+ * Berkeley DB found in the <db.h> header when Perl was configured.
+ */
+/* DB_VERSION_MINOR_CFG:
+ * This symbol, if defined, defines the minor version number of
+ * Berkeley DB found in the <db.h> header when Perl was configured.
+ * For DB version 1 this is always 0.
+ */
+/* DB_VERSION_PATCH_CFG:
+ * This symbol, if defined, defines the patch version number of
+ * Berkeley DB found in the <db.h> header when Perl was configured.
+ * For DB version 1 this is always 0.
+ */
#define DB_Hash_t int /**/
#define DB_Prefix_t int /**/
+#define DB_VERSION_MAJOR_CFG undef /**/
+#define DB_VERSION_MINOR_CFG undef /**/
+#define DB_VERSION_PATCH_CFG undef /**/
+
+/* I_GRP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <grp.h>.
+ */
+/* GRPASSWD:
+ * This symbol, if defined, indicates to the C program that struct group
+ * in <grp.h> contains gr_passwd.
+ */
+/*#define I_GRP /**/
+/*#define GRPASSWD /**/
+
+/* I_ICONV:
+ * This symbol, if defined, indicates that <iconv.h> exists and
+ * should be included.
+ */
+/*#define I_ICONV /**/
+
+/* I_IEEEFP:
+ * This symbol, if defined, indicates that <ieeefp.h> exists and
+ * should be included.
+ */
+/*#define I_IEEEFP /**/
/* I_INTTYPES:
* This symbol, if defined, indicates to the C program that it should
*/
/*#define I_INTTYPES /**/
+/* I_LIBUTIL:
+ * This symbol, if defined, indicates that <libutil.h> exists and
+ * should be included.
+ */
+/*#define I_LIBUTIL /**/
+
+/* I_MACH_CTHREADS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <mach/cthreads.h>.
+ */
+/*#define I_MACH_CTHREADS /**/
+
/* I_MNTENT:
* This symbol, if defined, indicates that <mntent.h> exists and
* should be included.
*/
/*#define I_MNTENT /**/
+/* I_NETDB:
+ * This symbol, if defined, indicates that <netdb.h> exists and
+ * should be included.
+ */
+/*#define I_NETDB /**/
+
/* I_NETINET_TCP:
* This symbol, if defined, indicates to the C program that it should
* include <netinet/tcp.h>.
*/
/*#define I_POLL /**/
+/* I_PROT:
+ * This symbol, if defined, indicates that <prot.h> exists and
+ * should be included.
+ */
+/*#define I_PROT /**/
+
+/* I_PTHREAD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <pthread.h>.
+ */
+/*#define I_PTHREAD /**/
+
+/* I_PWD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <pwd.h>.
+ */
+/* PWQUOTA:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_quota.
+ */
+/* PWAGE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_age.
+ */
+/* PWCHANGE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_change.
+ */
+/* PWCLASS:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_class.
+ */
+/* PWEXPIRE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_expire.
+ */
+/* PWCOMMENT:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_comment.
+ */
+/* PWGECOS:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_gecos.
+ */
+/* PWPASSWD:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_passwd.
+ */
+/*#define I_PWD /**/
+/*#define PWQUOTA /**/
+/*#define PWAGE /**/
+/*#define PWCHANGE /**/
+/*#define PWCLASS /**/
+/*#define PWEXPIRE /**/
+/*#define PWCOMMENT /**/
+/*#define PWGECOS /**/
+/*#define PWPASSWD /**/
+
/* I_SHADOW:
* This symbol, if defined, indicates that <shadow.h> exists and
* should be included.
*/
/*#define I_SOCKS /**/
+/* I_SUNMATH:
+ * This symbol, if defined, indicates that <sunmath.h> exists and
+ * should be included.
+ */
+/*#define I_SUNMATH /**/
+
+/* I_SYSLOG:
+ * This symbol, if defined, indicates that <syslog.h> exists and
+ * should be included.
+ */
+/*#define I_SYSLOG /**/
+
+/* I_SYSMODE:
+ * This symbol, if defined, indicates that <sys/mode.h> exists and
+ * should be included.
+ */
+/*#define I_SYSMODE /**/
+
/* I_SYS_MOUNT:
* This symbol, if defined, indicates that <sys/mount.h> exists and
* should be included.
*/
/*#define I_SYS_STATVFS /**/
+/* I_SYSUIO:
+ * This symbol, if defined, indicates that <sys/uio.h> exists and
+ * should be included.
+ */
+/*#define I_SYSUIO /**/
+
+/* I_SYSUTSNAME:
+ * This symbol, if defined, indicates that <sys/utsname.h> exists and
+ * should be included.
+ */
+/*#define I_SYSUTSNAME /**/
+
/* I_SYS_VFS:
* This symbol, if defined, indicates that <sys/vfs.h> exists and
* should be included.
*/
/*#define I_SYS_VFS /**/
+/* I_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <time.h>.
+ */
+/* I_SYS_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h>.
+ */
+/* I_SYS_TIME_KERNEL:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h> with KERNEL defined.
+ */
+#define I_TIME /**/
+/*#define I_SYS_TIME /**/
+/*#define I_SYS_TIME_KERNEL /**/
+
/* I_USTAT:
* This symbol, if defined, indicates that <ustat.h> exists and
* should be included.
*/
/*#define I_USTAT /**/
-/* HAS_OFF64_T:
- * This symbol will be defined if the C compiler supports off64_t.
+/* PERL_INC_VERSION_LIST:
+ * This variable specifies the list of subdirectories in over
+ * which perl.c:incpush() and lib/lib.pm will automatically
+ * search when adding directories to @INC, in a format suitable
+ * for a C initialization string. See the inc_version_list entry
+ * in Porting/Glossary for more details.
*/
-/* HAS_FPOS64_T:
- * This symbol will be defined if the C compiler supports fpos64_t.
+#define PERL_INC_VERSION_LIST 0 /**/
+
+/* INSTALL_USR_BIN_PERL:
+ * This symbol, if defined, indicates that Perl is to be installed
+ * also as /usr/bin/perl.
*/
-/*#define HAS_OFF64_T /**/
-/*#define HAS_FPOS64_T /**/
+/*#define INSTALL_USR_BIN_PERL /**/
/* PERL_PRIfldbl:
* This symbol, if defined, contains the string used by stdio to
* This symbol, if defined, contains the string used by stdio to
* format long doubles (format 'g') for output.
*/
-/*#define PERL_PRIfldbl "f" /**/
-/*#define PERL_PRIgldbl "g" /**/
+/* PERL_PRIeldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'e') for output.
+ */
+/* PERL_SCNfldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'f') for input.
+ */
+/*#define PERL_PRIfldbl "f" /**/
+/*#define PERL_PRIgldbl "g" /**/
+/*#define PERL_PRIeldbl "e" /**/
+/*#define PERL_SCNfldbl undef /**/
+
+/* Off_t:
+ * This symbol holds the type used to declare offsets in the kernel.
+ * It can be int, long, off_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+/* LSEEKSIZE:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
+/* Off_t_size:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
+#define Off_t off_t /* <offset> type */
+#define LSEEKSIZE 4 /* <offset> size */
+#define Off_t_size 4 /* <offset> size */
+
+/* Free_t:
+ * This variable contains the return type of free(). It is usually
+ * void, but occasionally int.
+ */
+/* Malloc_t:
+ * This symbol is the type of pointer returned by malloc and realloc.
+ */
+#define Malloc_t void * /**/
+#define Free_t void /**/
+
+/* MYMALLOC:
+ * This symbol, if defined, indicates that we're using our own malloc.
+ */
+/*#define MYMALLOC /**/
+
+/* Mode_t:
+ * This symbol holds the type used to declare file modes
+ * for systems calls. It is usually mode_t, but may be
+ * int or unsigned short. It may be necessary to include <sys/types.h>
+ * to get any typedef'ed information.
+ */
+#define Mode_t mode_t /* file mode parameter for system calls */
+
+/* VAL_O_NONBLOCK:
+ * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ * non-blocking I/O for the file descriptor. Note that there is no way
+ * back, i.e. you cannot turn it blocking again this way. If you wish to
+ * alternatively switch between blocking and non-blocking, use the
+ * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+ */
+/* VAL_EAGAIN:
+ * This symbol holds the errno error code set by read() when no data was
+ * present on the non-blocking file descriptor.
+ */
+/* RD_NODATA:
+ * This symbol holds the return code from read() when no data is present
+ * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ * not defined, then you can't distinguish between no data and EOF by
+ * issuing a read(). You'll have to find another way to tell for sure!
+ */
+/* EOF_NONBLOCK:
+ * This symbol, if defined, indicates to the C program that a read() on
+ * a non-blocking file descriptor will return 0 on EOF, and not the value
+ * held in RD_NODATA (-1 usually, in that case!).
+ */
+#define VAL_O_NONBLOCK O_NONBLOCK
+#define VAL_EAGAIN EAGAIN
+#define RD_NODATA -1
+#define EOF_NONBLOCK
+
+/* NEED_VA_COPY:
+ * This symbol, if defined, indicates that the system stores
+ * the variable argument list datatype, va_list, in a format
+ * that cannot be copied by simple assignment, so that some
+ * other means must be used when copying is required.
+ * As such systems vary in their provision (or non-provision)
+ * of copying mechanisms, handy.h defines a platform-
+ * independent macro, Perl_va_copy(src, dst), to do the job.
+ */
+/*#define NEED_VA_COPY /**/
+
+/* Netdb_host_t:
+ * This symbol holds the type used for the 1st argument
+ * to gethostbyaddr().
+ */
+/* Netdb_hlen_t:
+ * This symbol holds the type used for the 2nd argument
+ * to gethostbyaddr().
+ */
+/* Netdb_name_t:
+ * This symbol holds the type used for the argument to
+ * gethostbyname().
+ */
+/* Netdb_net_t:
+ * This symbol holds the type used for the 1st argument to
+ * getnetbyaddr().
+ */
+#define Netdb_host_t char * /**/
+#define Netdb_hlen_t int /**/
+#define Netdb_name_t char * /**/
+#define Netdb_net_t long /**/
+
+/* PERL_OTHERLIBDIRS:
+ * This variable contains a colon-separated set of paths for the perl
+ * binary to search for additional library files or modules.
+ * These directories will be tacked to the end of @INC.
+ * Perl will automatically search below each path for version-
+ * and architecture-specific directories. See PERL_INC_VERSION_LIST
+ * for more details.
+ */
+/*#define PERL_OTHERLIBDIRS "" /**/
/* IVTYPE:
* This symbol defines the C type used for Perl's IV.
/* U64SIZE:
* This symbol contains the sizeof(U64).
*/
+/* NVSIZE:
+ * This symbol contains the sizeof(NV).
+ */
+/* NV_PRESERVES_UV:
+ * This symbol, if defined, indicates that a variable of type NVTYPE
+ * can preserve all the bits of a variable of type UVTYPE.
+ */
+/* NV_PRESERVES_UV_BITS:
+ * This symbol contains the number of bits a variable of type NVTYPE
+ * can preserve of a variable of type UVTYPE.
+ */
#define IVTYPE long /**/
#define UVTYPE unsigned long /**/
#define I8TYPE char /**/
#define I64SIZE 8 /**/
#define U64SIZE 8 /**/
#endif
+#define NVSIZE 8 /**/
+#define NV_PRESERVES_UV
+#define NV_PRESERVES_UV_BITS 32
/* IVdf:
* This symbol defines the format string used for printing a Perl IV
*/
/* UVxf:
* This symbol defines the format string used for printing a Perl UV
- * as an unsigned hexadecimal integer.
+ * as an unsigned hexadecimal integer in lowercase abcdef.
+ */
+/* UVXf:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned hexadecimal integer in uppercase ABCDEF.
+ */
+/* NVef:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %e-ish floating point format.
+ */
+/* NVff:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %f-ish floating point format.
+ */
+/* NVgf:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %g-ish floating point format.
*/
#define IVdf "ld" /**/
#define UVuf "lu" /**/
#define UVof "lo" /**/
#define UVxf "lx" /**/
+#define UVXf "lX" /**/
+#define NVef "e" /**/
+#define NVff "f" /**/
+#define NVgf "g" /**/
+
+/* Pid_t:
+ * This symbol holds the type used to declare process ids in the kernel.
+ * It can be int, uint, pid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Pid_t int /* PID type */
+
+/* PRIVLIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ */
+/* PRIVLIB_EXP:
+ * This symbol contains the ~name expanded version of PRIVLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define PRIVLIB "c:\\perl\\5.7.2\\lib" /**/
+#define PRIVLIB_EXP (win32_get_privlib("5.7.2")) /**/
+
+/* PTRSIZE:
+ * This symbol contains the size of a pointer, so that the C preprocessor
+ * can make decisions based on it. It will be sizeof(void *) if
+ * the compiler supports (void *); otherwise it will be
+ * sizeof(char *).
+ */
+#define PTRSIZE 4 /**/
+
+/* Drand01:
+ * This macro is to be used to generate uniformly distributed
+ * random numbers over the range [0., 1.[. You may have to supply
+ * an 'extern double drand48();' in your program since SunOS 4.1.3
+ * doesn't provide you with anything relevant in its headers.
+ * See HAS_DRAND48_PROTO.
+ */
+/* Rand_seed_t:
+ * This symbol defines the type of the argument of the
+ * random seed function.
+ */
+/* seedDrand01:
+ * This symbol defines the macro to be used in seeding the
+ * random number generator (see Drand01).
+ */
+/* RANDBITS:
+ * This symbol indicates how many bits are produced by the
+ * function used to generate normalized random numbers.
+ * Values include 15, 16, 31, and 48.
+ */
+#define Drand01() (rand()/(double)((unsigned)1<<RANDBITS)) /**/
+#define Rand_seed_t unsigned /**/
+#define seedDrand01(x) srand((Rand_seed_t)x) /**/
+#define RANDBITS 15 /**/
/* SELECT_MIN_BITS:
* This symbol holds the minimum number of bits operated by select.
*/
#define SELECT_MIN_BITS 32 /**/
-/* STARTPERL:
- * This variable contains the string to put in front of a perl
- * script to make sure (one hopes) that it runs with perl and not
- * some shell.
+/* Select_fd_set_t:
+ * This symbol holds the type used for the 2nd, 3rd, and 4th
+ * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
+ * is defined, and 'int *' otherwise. This is only useful if you
+ * have select(), of course.
*/
-#define STARTPERL "#!perl" /**/
+#define Select_fd_set_t Perl_fd_set * /**/
-/* HAS_STDIO_STREAM_ARRAY:
- * This symbol, if defined, tells that there is an array
- * holding the stdio streams.
- */
-/* STDIO_STREAM_ARRAY:
- * This symbol tells the name of the array holding the stdio streams.
- * Usual values include _iob, __iob, and __sF.
+/* SIG_NAME:
+ * This symbol contains a list of signal names in order of
+ * signal number. This is intended
+ * to be used as a static array initialization, like this:
+ * char *sig_name[] = { SIG_NAME };
+ * The signals in the list are separated with commas, and each signal
+ * is surrounded by double quotes. There is no leading SIG in the signal
+ * name, i.e. SIGQUIT is known as "QUIT".
+ * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ * etc., where nn is the actual signal number (e.g. NUM37).
+ * The signal number for sig_name[i] is stored in sig_num[i].
+ * The last element is 0 to terminate the list with a NULL. This
+ * corresponds to the 0 at the end of the sig_num list.
*/
-/*#define HAS_STDIO_STREAM_ARRAY /**/
-#define STDIO_STREAM_ARRAY
-
-/* HAS_STRTOULL:
- * This symbol, if defined, indicates that the strtoull routine is
- * available to convert strings into unsigned long longs.
+/* SIG_NUM:
+ * This symbol contains a list of signal numbers, in the same order as the
+ * SIG_NAME list. It is suitable for static array initialization, as in:
+ * int sig_num[] = { SIG_NUM };
+ * The signals in the list are separated with commas, and the indices
+ * within that list and the SIG_NAME list match, so it's easy to compute
+ * the signal name from a number or vice versa at the price of a small
+ * dynamic linear lookup.
+ * Duplicates are allowed, but are moved to the end of the list.
+ * The signal number corresponding to sig_name[i] is sig_number[i].
+ * if (i < NSIG) then sig_number[i] == i.
+ * The last element is 0, corresponding to the 0 at the end of
+ * the sig_name list.
*/
-/*#define HAS_STRTOULL /**/
-
-/* USE_64_BITS:
- * This symbol, if defined, indicates that 64-bit integers should
- * be used when available. If not defined, the native integers
- * will be used (be they 32 or 64 bits).
+/* SIG_SIZE:
+ * This variable contains the number of elements of the sig_name
+ * and sig_num arrays, excluding the final NULL entry.
*/
-#ifndef USE_64_BITS
-/*#define USE_64_BITS /**/
-#endif
+#define SIG_NAME "ZERO", "NUM01", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "NUM16", "NUM17", "NUM18", "NUM19", "CHLD", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0 /**/
+#define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0 /**/
+#define SIG_SIZE 27 /**/
-/* USE_LARGE_FILES:
- * This symbol, if defined, indicates that large file support
- * should be used when available. The USE_64_BITS symbol will
- * also be turned on if necessary.
+/* SITEARCH:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-dependent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
*/
-#ifndef USE_LARGE_FILES
-/*#define USE_LARGE_FILES /**/
-#endif
-
-/* USE_LONG_DOUBLE:
- * This symbol, if defined, indicates that long doubles should
- * be used when available.
+/* SITEARCH_EXP:
+ * This symbol contains the ~name expanded version of SITEARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#ifndef USE_LONG_DOUBLE
-/*#define USE_LONG_DOUBLE /**/
-#endif
+#define SITEARCH "c:\\perl\\site\\5.7.2\\lib\\MSWin32-x86-multi-thread" /**/
+/*#define SITEARCH_EXP "" /**/
-/* USE_LONG_LONG:
- * This symbol, if defined, indicates that long longs should
- * be used when available.
+/* SITELIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-independent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
*/
-#ifndef USE_LONG_LONG
-/*#define USE_LONG_LONG /**/
-#endif
-
-#ifndef USE_MORE_BITS
-/*#define USE_MORE_BITS /**/
-#endif
-
-/* MULTIPLICITY:
- * This symbol, if defined, indicates that Perl should
- * be built to use multiplicity.
+/* SITELIB_EXP:
+ * This symbol contains the ~name expanded version of SITELIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#ifndef MULTIPLICTY
-/*#define MULTIPLICITY /**/
-#endif
-
-/* USE_PERLIO:
- * This symbol, if defined, indicates that the PerlIO abstraction should
- * be used throughout. If not defined, stdio should be
- * used in a fully backward compatible manner.
+/* SITELIB_STEM:
+ * This define is SITELIB_EXP with any trailing version-specific component
+ * removed. The elements in inc_version_list (inc_version_list.U) can
+ * be tacked onto this variable to generate a list of directories to search.
*/
-#ifndef USE_PERLIO
-/*#define USE_PERLIO /**/
-#endif
+#define SITELIB "c:\\perl\\site\\5.7.2\\lib" /**/
+#define SITELIB_EXP (win32_get_sitelib("5.7.2")) /**/
+#define SITELIB_STEM "" /**/
-/* USE_SOCKS:
- * This symbol, if defined, indicates that Perl should
- * be built to use socks.
+/* Size_t_size:
+ * This symbol holds the size of a Size_t in bytes.
*/
-#ifndef USE_SOCKS
-/*#define USE_SOCKS /**/
-#endif
+#define Size_t_size 4 /**/
-/* HAS_DRAND48_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the drand48() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern double drand48 _((void));
+/* Size_t:
+ * This symbol holds the type used to declare length parameters
+ * for string functions. It is usually size_t, but may be
+ * unsigned long, int, etc. It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-/*#define HAS_DRAND48_PROTO /**/
+#define Size_t size_t /* length paramater for string functions */
-/* HAS_GETHOST_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for gethostent(), gethostbyname(), and
- * gethostbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* Sock_size_t:
+ * This symbol holds the type used for the size argument of
+ * various socket calls (just the base type, not the pointer-to).
*/
-#define HAS_GETHOST_PROTOS /**/
+#define Sock_size_t int /**/
-/* HAS_GETNET_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getnetent(), getnetbyname(), and
- * getnetbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* SSize_t:
+ * This symbol holds the type used by functions that return
+ * a count of bytes or an error condition. It must be a signed type.
+ * It is usually ssize_t, but may be long or int, etc.
+ * It may be necessary to include <sys/types.h> or <unistd.h>
+ * to get any typedef'ed information.
+ * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
*/
-/*#define HAS_GETNET_PROTOS /**/
+#define SSize_t int /* signed count of bytes */
-/* HAS_GETPROTO_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getprotoent(), getprotobyname(), and
- * getprotobyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* STARTPERL:
+ * This variable contains the string to put in front of a perl
+ * script to make sure (one hopes) that it runs with perl and not
+ * some shell.
*/
-#define HAS_GETPROTO_PROTOS /**/
+#define STARTPERL "#!perl" /**/
-/* HAS_GETSERV_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getservent(), getservbyname(), and
- * getservbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* STDCHAR:
+ * This symbol is defined to be the type of char used in stdio.h.
+ * It has the values "unsigned char" or "char".
*/
-#define HAS_GETSERV_PROTOS /**/
+#define STDCHAR char /**/
-/* Netdb_host_t:
- * This symbol holds the type used for the 1st argument
- * to gethostbyaddr().
+/* HAS_STDIO_STREAM_ARRAY:
+ * This symbol, if defined, tells that there is an array
+ * holding the stdio streams.
*/
-/* Netdb_hlen_t:
- * This symbol holds the type used for the 2nd argument
- * to gethostbyaddr().
+/* STDIO_STREAM_ARRAY:
+ * This symbol tells the name of the array holding the stdio streams.
+ * Usual values include _iob, __iob, and __sF.
*/
-/* Netdb_name_t:
- * This symbol holds the type used for the argument to
- * gethostbyname().
+/*#define HAS_STDIO_STREAM_ARRAY /**/
+#define STDIO_STREAM_ARRAY
+
+/* Uid_t_f:
+ * This symbol defines the format string used for printing a Uid_t.
*/
-/* Netdb_net_t:
- * This symbol holds the type used for the 1st argument to
- * getnetbyaddr().
+#define Uid_t_f "ld" /**/
+
+/* Uid_t_sign:
+ * This symbol holds the signedess of a Uid_t.
+ * 1 for unsigned, -1 for signed.
*/
-#define Netdb_host_t char * /**/
-#define Netdb_hlen_t int /**/
-#define Netdb_name_t char * /**/
-#define Netdb_net_t long /**/
+#define Uid_t_sign -1 /* UID sign */
-/* Select_fd_set_t:
- * This symbol holds the type used for the 2nd, 3rd, and 4th
- * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
- * is defined, and 'int *' otherwise. This is only useful if you
- * have select(), of course.
+/* Uid_t_size:
+ * This symbol holds the size of a Uid_t in bytes.
*/
-#define Select_fd_set_t Perl_fd_set * /**/
+#define Uid_t_size 4 /* UID size */
-/* ARCHNAME:
- * This symbol holds a string representing the architecture name.
- * It may be used to construct an architecture-dependant pathname
- * where library files may be held under a private library, for
- * instance.
+/* Uid_t:
+ * This symbol holds the type used to declare user ids in the kernel.
+ * It can be int, ushort, uid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-#define ARCHNAME "MSWin32-x86" /**/
+#define Uid_t uid_t /* UID type */
-/* OLD_PTHREAD_CREATE_JOINABLE:
- * This symbol, if defined, indicates how to create pthread
- * in joinable (aka undetached) state. NOTE: not defined
- * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
- * (the new version of the constant).
- * If defined, known values are PTHREAD_CREATE_UNDETACHED
- * and __UNDETACHED.
+/* USE_64_BIT_INT:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be employed (be they 32 or 64 bits). The minimal possible
+ * 64-bitness is used, just enough to get 64-bit integers into Perl.
+ * This may mean using for example "long longs", while your memory
+ * may still be limited to 2 gigabytes.
*/
-/*#define OLD_PTHREAD_CREATE_JOINABLE /**/
+/* USE_64_BIT_ALL:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be used (be they 32 or 64 bits). The maximal possible
+ * 64-bitness is employed: LP64 or ILP64, meaning that you will
+ * be able to use more than 2 gigabytes of memory. This mode is
+ * even more binary incompatible than USE_64_BIT_INT. You may not
+ * be able to run the resulting executable in a 32-bit CPU at all or
+ * you may need at least to reboot your OS to 64-bit mode.
+ */
+#ifndef USE_64_BIT_INT
+/*#define USE_64_BIT_INT /**/
+#endif
-/* HAS_PTHREAD_YIELD:
- * This symbol, if defined, indicates that the pthread_yield
- * routine is available to yield the execution of the current
- * thread. sched_yield is preferable to pthread_yield.
+#ifndef USE_64_BIT_ALL
+/*#define USE_64_BIT_ALL /**/
+#endif
+
+/* USE_LARGE_FILES:
+ * This symbol, if defined, indicates that large file support
+ * should be used when available.
*/
-/* SCHED_YIELD:
- * This symbol defines the way to yield the execution of
- * the current thread. Known ways are sched_yield,
- * pthread_yield, and pthread_yield with NULL.
+#ifndef USE_LARGE_FILES
+/*#define USE_LARGE_FILES /**/
+#endif
+
+/* USE_LONG_DOUBLE:
+ * This symbol, if defined, indicates that long doubles should
+ * be used when available.
*/
-/* HAS_SCHED_YIELD:
- * This symbol, if defined, indicates that the sched_yield
- * routine is available to yield the execution of the current
- * thread. sched_yield is preferable to pthread_yield.
+#ifndef USE_LONG_DOUBLE
+/*#define USE_LONG_DOUBLE /**/
+#endif
+
+/* USE_MORE_BITS:
+ * This symbol, if defined, indicates that 64-bit interfaces and
+ * long doubles should be used when available.
*/
-/*#define HAS_PTHREAD_YIELD /**/
-#define SCHED_YIELD /**/
-/*#define HAS_SCHED_YIELD /**/
+#ifndef USE_MORE_BITS
+/*#define USE_MORE_BITS /**/
+#endif
-/* I_MACH_CTHREADS:
- * This symbol, if defined, indicates to the C program that it should
- * include <mach/cthreads.h>.
+/* MULTIPLICITY:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use multiplicity.
*/
-/*#define I_MACH_CTHREADS /**/
+#ifndef MULTIPLICITY
+#define MULTIPLICITY /**/
+#endif
-/* I_PTHREAD:
- * This symbol, if defined, indicates to the C program that it should
- * include <pthread.h>.
+/* USE_PERLIO:
+ * This symbol, if defined, indicates that the PerlIO abstraction should
+ * be used throughout. If not defined, stdio should be
+ * used in a fully backward compatible manner.
*/
-/*#define I_PTHREAD /**/
+#ifndef USE_PERLIO
+#define USE_PERLIO /**/
+#endif
+
+/* USE_SOCKS:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use socks.
+ */
+#ifndef USE_SOCKS
+/*#define USE_SOCKS /**/
+#endif
/* USE_ITHREADS:
* This symbol, if defined, indicates that Perl should be built to
* This symbol, if defined, indicates that Perl should
* be built to use the old draft POSIX threads API.
*/
+/* USE_REENTRANT_API:
+ * This symbol, if defined, indicates that Perl should
+ * try to use the various _r versions of library functions.
+ * This is extremely experimental.
+ */
/*#define USE_5005THREADS /**/
-/*#define USE_ITHREADS /**/
+#define USE_ITHREADS /**/
#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
-#define USE_THREADS /* until src is revised*/
+#define USE_5005THREADS /* until src is revised*/
#endif
/*#define OLD_PTHREADS_API /**/
+/*#define USE_REENTRANT_API /**/
-/* Time_t:
- * This symbol holds the type returned by time(). It can be long,
- * or time_t on BSD sites (in which case <sys/types.h> should be
- * included).
+/* PERL_VENDORARCH:
+ * If defined, this symbol contains the name of a private library.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world.
+ * It may have a ~ on the front.
+ * The standard distribution will put nothing in this directory.
+ * Vendors who distribute perl may wish to place their own
+ * architecture-dependent modules and extensions in this directory with
+ * MakeMaker Makefile.PL INSTALLDIRS=vendor
+ * or equivalent. See INSTALL for details.
*/
-#define Time_t time_t /* Time type */
+/* PERL_VENDORARCH_EXP:
+ * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/*#define PERL_VENDORARCH "" /**/
+/*#define PERL_VENDORARCH_EXP "" /**/
-/* HAS_TIMES:
- * This symbol, if defined, indicates that the times() routine exists.
- * Note that this became obsolete on some systems (SUNOS), which now
- * use getrusage(). It may be necessary to include <sys/times.h>.
+/* PERL_VENDORLIB_EXP:
+ * This symbol contains the ~name expanded version of VENDORLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define HAS_TIMES /**/
+/* PERL_VENDORLIB_STEM:
+ * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
+ * removed. The elements in inc_version_list (inc_version_list.U) can
+ * be tacked onto this variable to generate a list of directories to search.
+ */
+/*#define PERL_VENDORLIB_EXP "" /**/
+/*#define PERL_VENDORLIB_STEM "" /**/
-/* Fpos_t:
- * This symbol holds the type used to declare file positions in libc.
- * It can be fpos_t, long, uint, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* VOIDFLAGS:
+ * This symbol indicates how much support of the void type is given by this
+ * compiler. What various bits mean:
+ *
+ * 1 = supports declaration of void
+ * 2 = supports arrays of pointers to functions returning void
+ * 4 = supports comparisons between pointers to void functions and
+ * addresses of void functions
+ * 8 = suports declaration of generic void pointers
+ *
+ * The package designer should define VOIDUSED to indicate the requirements
+ * of the package. This can be done either by #defining VOIDUSED before
+ * including config.h, or by defining defvoidused in Myinit.U. If the
+ * latter approach is taken, only those flags will be tested. If the
+ * level of void support necessary is not present, defines void to int.
*/
-#define Fpos_t fpos_t /* File position type */
+#ifndef VOIDUSED
+#define VOIDUSED 15
+#endif
+#define VOIDFLAGS 15
+#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
+#define void int /* is void to be avoided? */
+#define M_VOID /* Xenix strikes again */
+#endif
-/* Gid_t_f:
- * This symbol defines the format string used for printing a Gid_t.
+/* PERL_XS_APIVERSION:
+ * This variable contains the version of the oldest perl binary
+ * compatible with the present perl. perl.c:incpush() and
+ * lib/lib.pm will automatically search in c:\\perl\\site\\5.7.2\\lib\\MSWin32-x86-multi-thread for older
+ * directories across major versions back to xs_apiversion.
+ * This is only useful if you have a perl library directory tree
+ * structured like the default one.
+ * See INSTALL for how this works.
+ * The versioned site_perl directory was introduced in 5.005,
+ * so that is the lowest possible value.
+ * Since this can depend on compile time options (such as
+ * bincompat) it is set by Configure. Other non-default sources
+ * of potential incompatibility, such as multiplicity, threads,
+ * debugging, 64bits, sfio, etc., are not checked for currently,
+ * though in principle we could go snooping around in old
+ * Config.pm files.
+ */
+/* PERL_PM_APIVERSION:
+ * This variable contains the version of the oldest perl
+ * compatible with the present perl. (That is, pure perl modules
+ * written for pm_apiversion will still work for the current
+ * version). perl.c:incpush() and lib/lib.pm will automatically
+ * search in c:\\perl\\site\\5.7.2\\lib for older directories across major versions
+ * back to pm_apiversion. This is only useful if you have a perl
+ * library directory tree structured like the default one. The
+ * versioned site_perl library was introduced in 5.005, so that's
+ * the default setting for this variable. It's hard to imagine
+ * it changing before Perl6. It is included here for symmetry
+ * with xs_apiveprsion -- the searching algorithms will
+ * (presumably) be similar.
+ * See the INSTALL file for how this works.
+ */
+#define PERL_XS_APIVERSION "5.6.0"
+#define PERL_PM_APIVERSION "5.005"
+
+/* SETUID_SCRIPTS_ARE_SECURE_NOW:
+ * This symbol, if defined, indicates that the bug that prevents
+ * setuid scripts from being secure is not present in this kernel.
*/
-#define Gid_t_f "ld" /**/
+/* DOSUID:
+ * This symbol, if defined, indicates that the C program should
+ * check the script that it is executing for setuid/setgid bits, and
+ * attempt to emulate setuid/setgid on systems that have disabled
+ * setuid #! scripts because the kernel can't do it securely.
+ * It is up to the package designer to make sure that this emulation
+ * is done securely. Among other things, it should do an fstat on
+ * the script it just opened to make sure it really is a setuid/setgid
+ * script, it should make sure the arguments passed correspond exactly
+ * to the argument on the #! line, and it should not trust any
+ * subprocesses to which it must pass the filename rather than the
+ * file descriptor of the script to be executed.
+ */
+/*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
+/*#define DOSUID /**/
-/* Gid_t_size:
- * This symbol holds the size of a Gid_t in bytes.
+/* I_STDARG:
+ * This symbol, if defined, indicates that <stdarg.h> exists and should
+ * be included.
*/
-#define Gid_t_size 4 /* GID size */
+/* I_VARARGS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <varargs.h>.
+ */
+#define I_STDARG /**/
+/*#define I_VARARGS /**/
-/* Gid_t:
- * This symbol holds the return type of getgid() and the type of
- * argument to setrgid() and related functions. Typically,
- * it is the type of group ids in the kernel. It can be int, ushort,
- * uid_t, etc... It may be necessary to include <sys/types.h> to get
- * any typedef'ed information.
+/* USE_CROSS_COMPILE:
+ * This symbol, if defined, indicates that Perl is being cross-compiled.
*/
-#define Gid_t gid_t /* Type for getgid(), etc... */
+/* PERL_TARGETARCH:
+ * This symbol, if defined, indicates the target architecture
+ * Perl has been cross-compiled to. Undefined if not a cross-compile.
+ */
+#ifndef USE_CROSS_COMPILE
+/*#define USE_CROSS_COMPILE /**/
+#define PERL_TARGETARCH "undef" /**/
+#endif
-/* Off_t:
- * This symbol holds the type used to declare offsets in the kernel.
- * It can be int, long, off_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* HAS_DBMINIT_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the dbminit() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int dbminit(char *);
*/
-/* LSEEKSIZE:
- * This symbol holds the number of bytes used by the Off_t.
+/*#define HAS_DBMINIT_PROTO /**/
+
+/* HAS_FLOCK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the flock() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int flock(int, int);
*/
-/* Off_t_size:
- * This symbol holds the number of bytes used by the Off_t.
+/*#define HAS_FLOCK_PROTO /**/
+
+/* HAS_NL_LANGINFO:
+ * This symbol, if defined, indicates that the nl_langinfo routine is
+ * available to return local data. You will also need <langinfo.h>
+ * and therefore I_LANGINFO.
*/
-#define Off_t off_t /* <offset> type */
-#define LSEEKSIZE 4 /* <offset> size */
-#define Off_t_size 4 /* <offset> size */
+/*#define HAS_NL_LANGINFO /**/
-/* Mode_t:
- * This symbol holds the type used to declare file modes
- * for systems calls. It is usually mode_t, but may be
- * int or unsigned short. It may be necessary to include <sys/types.h>
- * to get any typedef'ed information.
+/* HAS_SIGPROCMASK:
+ * This symbol, if defined, indicates that the sigprocmask
+ * system call is available to examine or change the signal mask
+ * of the calling process.
*/
-#define Mode_t mode_t /* file mode parameter for system calls */
+/*#define HAS_SIGPROCMASK /**/
-/* Pid_t:
- * This symbol holds the type used to declare process ids in the kernel.
- * It can be int, uint, pid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* HAS_SOCKATMARK:
+ * This symbol, if defined, indicates that the sockatmark routine is
+ * available to test whether a socket is at the out-of-band mark.
*/
-#define Pid_t int /* PID type */
+/*#define HAS_SOCKATMARK /**/
-/* Size_t:
- * This symbol holds the type used to declare length parameters
- * for string functions. It is usually size_t, but may be
- * unsigned long, int, etc. It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* HAS_SOCKATMARK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the sockatmark() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int sockatmark _((int));
*/
-#define Size_t size_t /* length paramater for string functions */
+/*#define HAS_SOCKATMARK_PROTO /**/
-/* Uid_t_f:
- * This symbol defines the format string used for printing a Uid_t.
+/* HAS_SETRESGID_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the setresgid() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);
*/
-#define Uid_t_f "ld" /**/
+/*#define HAS_SETRESGID_PROTO /**/
-/* Uid_t_size:
- * This symbol holds the size of a Uid_t in bytes.
+/* HAS_SETRESUID_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the setresuid() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);
*/
-#define Uid_t_size 4 /* UID size */
+/*#define HAS_SETRESUID_PROTO /**/
-/* Uid_t:
- * This symbol holds the type used to declare user ids in the kernel.
- * It can be int, ushort, uid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* HAS_STRFTIME:
+ * This symbol, if defined, indicates that the strftime routine is
+ * available to do time formatting.
*/
-#define Uid_t uid_t /* UID type */
+#define HAS_STRFTIME /**/
+
+/* HAS_SYSCALL_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the syscall() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int syscall(int, ...);
+ * extern int syscall(long, ...);
+ */
+/*#define HAS_SYSCALL_PROTO /**/
+
+/* U32_ALIGNMENT_REQUIRED:
+ * This symbol, if defined, indicates that you must access
+ * character data through U32-aligned pointers.
+ */
+#define U32_ALIGNMENT_REQUIRED /**/
+
+/* HAS_USLEEP_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the usleep() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int usleep(useconds_t);
+ */
+/*#define HAS_USLEEP_PROTO /**/
+
+/* I_LANGINFO:
+ * This symbol, if defined, indicates that <langinfo.h> exists and
+ * should be included.
+ */
+/*#define I_LANGINFO /**/
+
+/* HAS_PTHREAD_ATFORK:
+ * This symbol, if defined, indicates that the pthread_atfork routine
+ * is available setup fork handlers.
+ */
+/*#define HAS_PTHREAD_ATFORK /**/
#endif
https://perl5.git.perl.org / perl5.git / blobdiff