struct regnode_charclass_class *start_class;
} scan_data_t;
+/* The below is perhaps overboard, but this allows us to save a test at the
+ * expense of a mask. This is because on both EBCDIC and ASCII machines, 'A'
+ * and 'a' differ by a single bit; the same with the upper and lower case of
+ * all other ASCII-range alphabetics. On ASCII platforms, they are 32 apart;
+ * on EBCDIC, they are 64. This uses an exclusive 'or' to find that bit and
+ * then inverts it to form a mask, with just a single 0, in the bit position
+ * where the upper- and lowercase differ. XXX There are about 40 other
+ * instances in the Perl core where this micro-optimization could be used.
+ * Should decide if maintenance cost is worse, before changing those
+ *
+ * Returns a boolean as to whether or not 'v' is either a lowercase or
+ * uppercase instance of 'c', where 'c' is in [A-Za-z]. If 'c' is a
+ * compile-time constant, the generated code is better than some optimizing
+ * compilers figure out, amounting to a mask and test. The results are
+ * meaningless if 'c' is not one of [A-Za-z] */
+#define isARG2_lower_or_UPPER_ARG1(c, v) \
+ (((v) & ~('A' ^ 'a')) == ((c) & ~('A' ^ 'a')))
+
/*
* Forward declarations for pregcomp()'s friends.
*/
}
/* These two functions currently do the exact same thing */
-#define cl_init_zero S_cl_init
+#define cl_init_zero cl_init
/* 'AND' a given class with another one. Can create false positives. 'cl'
* should not be inverted. 'and_with->flags & ANYOF_CLASS' should be 0 if
* have to find at least two characters for a multi-fold */
const U8* upper = (OP(scan) == EXACTF) ? s_end : s_end -1;
- /* The below is perhaps overboard, but this allows us to save a
- * test each time through the loop at the expense of a mask. This
- * is because on both EBCDIC and ASCII machines, 'S' and 's' differ
- * by a single bit. On ASCII they are 32 apart; on EBCDIC, they
- * are 64. This uses an exclusive 'or' to find that bit and then
- * inverts it to form a mask, with just a single 0, in the bit
- * position where 'S' and 's' differ. */
- const U8 S_or_s_mask = (U8) ~ ('S' ^ 's');
- const U8 s_masked = 's' & S_or_s_mask;
-
while (s < upper) {
int len = is_MULTI_CHAR_FOLD_latin1_safe(s, s_end);
if (! len) { /* Not a multi-char fold. */
}
if (len == 2
- && ((*s & S_or_s_mask) == s_masked)
- && ((*(s+1) & S_or_s_mask) == s_masked))
+ && isARG2_lower_or_UPPER_ARG1('s', *s)
+ && isARG2_lower_or_UPPER_ARG1('s', *(s+1)))
{
/* EXACTF nodes need to know that the minimum length
&& data.last_start_min == 0 && data.last_end > 0
&& !RExC_seen_zerolen
&& !(RExC_seen & REG_SEEN_VERBARG)
- && (!(RExC_seen & REG_SEEN_GPOS) || (r->extflags & RXf_ANCH_GPOS)))
+ && !((RExC_seen & REG_SEEN_GPOS) || (r->extflags & RXf_ANCH_GPOS)))
r->extflags |= RXf_CHECK_ALL;
scan_commit(pRExC_state, &data,&minlen,0);
r->check_offset_min = r->float_min_offset;
r->check_offset_max = r->float_max_offset;
}
- /* XXXX Currently intuiting is not compatible with ANCH_GPOS.
- This should be changed ASAP! */
- if ((r->check_substr || r->check_utf8) && !(r->extflags & RXf_ANCH_GPOS)) {
+ if ((r->check_substr || r->check_utf8) ) {
r->extflags |= RXf_USE_INTUIT;
if (SvTAIL(r->check_substr ? r->check_substr : r->check_utf8))
r->extflags |= RXf_INTUIT_TAIL;
PERL_ARGS_ASSERT_REG_NUMBERED_BUFF_FETCH;
- if ( ( n == RX_BUFF_IDX_CARET_PREMATCH
+ if ( n == RX_BUFF_IDX_CARET_PREMATCH
|| n == RX_BUFF_IDX_CARET_FULLMATCH
|| n == RX_BUFF_IDX_CARET_POSTMATCH
- )
- && !(rx->extflags & RXf_PMf_KEEPCOPY)
- )
- goto ret_undef;
+ )
+ {
+ bool keepcopy = cBOOL(rx->extflags & RXf_PMf_KEEPCOPY);
+ if (!keepcopy) {
+ /* on something like
+ * $r = qr/.../;
+ * /$qr/p;
+ * the KEEPCOPY is set on the PMOP rather than the regex */
+ if (PL_curpm && r == PM_GETRE(PL_curpm))
+ keepcopy = cBOOL(PL_curpm->op_pmflags & PMf_KEEPCOPY);
+ }
+ if (!keepcopy)
+ goto ret_undef;
+ }
if (!rx->subbeg)
goto ret_undef;
PERL_ARGS_ASSERT_REG_NUMBERED_BUFF_LENGTH;
+ if ( paren == RX_BUFF_IDX_CARET_PREMATCH
+ || paren == RX_BUFF_IDX_CARET_FULLMATCH
+ || paren == RX_BUFF_IDX_CARET_POSTMATCH
+ )
+ {
+ bool keepcopy = cBOOL(rx->extflags & RXf_PMf_KEEPCOPY);
+ if (!keepcopy) {
+ /* on something like
+ * $r = qr/.../;
+ * /$qr/p;
+ * the KEEPCOPY is set on the PMOP rather than the regex */
+ if (PL_curpm && r == PM_GETRE(PL_curpm))
+ keepcopy = cBOOL(PL_curpm->op_pmflags & PMf_KEEPCOPY);
+ }
+ if (!keepcopy)
+ goto warn_undef;
+ }
+
/* Some of this code was originally in C<Perl_magic_len> in F<mg.c> */
switch (paren) {
case RX_BUFF_IDX_CARET_PREMATCH: /* ${^PREMATCH} */
- if (!(rx->extflags & RXf_PMf_KEEPCOPY))
- goto warn_undef;
- /*FALLTHROUGH*/
-
case RX_BUFF_IDX_PREMATCH: /* $` */
if (rx->offs[0].start != -1) {
i = rx->offs[0].start;
return 0;
case RX_BUFF_IDX_CARET_POSTMATCH: /* ${^POSTMATCH} */
- if (!(rx->extflags & RXf_PMf_KEEPCOPY))
- goto warn_undef;
case RX_BUFF_IDX_POSTMATCH: /* $' */
if (rx->offs[0].end != -1) {
i = rx->sublen - rx->offs[0].end;
}
return 0;
- case RX_BUFF_IDX_CARET_FULLMATCH: /* ${^MATCH} */
- if (!(rx->extflags & RXf_PMf_KEEPCOPY))
- goto warn_undef;
- /*FALLTHROUGH*/
-
- /* $& / ${^MATCH}, $1, $2, ... */
- default:
+ default: /* $& / ${^MATCH}, $1, $2, ... */
if (paren <= (I32)rx->nparens &&
(s1 = rx->offs[paren].start) != -1 &&
(t1 = rx->offs[paren].end) != -1)
/* The header definitions are in F<inline_invlist.c> */
-/* This converts to/from our UVs to what the SV code is expecting: bytes. */
-#define TO_INTERNAL_SIZE(x) ((x) * sizeof(UV))
-#define FROM_INTERNAL_SIZE(x) ((x)/ sizeof(UV))
-
-
PERL_STATIC_INLINE UV*
S__invlist_array_init(pTHX_ SV* const invlist, const bool will_have_0)
{
PERL_ARGS_ASSERT__INVLIST_ARRAY_INIT;
/* Must be empty */
- assert(! *_get_invlist_len_addr(invlist));
+ assert(! _invlist_len(invlist));
*zero_addr = 0;
/* Must not be empty. If these fail, you probably didn't check for <len>
* being non-zero before trying to get the array */
- assert(*_get_invlist_len_addr(invlist));
+ assert(_invlist_len(invlist));
/* The very first element always contains zero, The array begins either
* there, or if the inversion list is offset, at the element after it.
PERL_ARGS_ASSERT_INVLIST_SET_LEN;
- *_get_invlist_len_addr(invlist) = len;
+ assert(SvTYPE(invlist) == SVt_INVLIST);
SvCUR_set(invlist,
(len == 0)
PERL_ARGS_ASSERT_GET_INVLIST_PREVIOUS_INDEX_ADDR;
+ assert(SvTYPE(invlist) == SVt_INVLIST);
+
return &(((XINVLIST*) SvANY(invlist))->prev_index);
}
PERL_ARGS_ASSERT_INVLIST_MAX;
+ assert(SvTYPE(invlist) == SVt_INVLIST);
+
/* Assumes worst case, in which the 0 element is not counted in the
* inversion list, so subtracts 1 for that */
return SvLEN(invlist) == 0 /* This happens under _new_invlist_C_array */
: FROM_INTERNAL_SIZE(SvLEN(invlist)) - 1;
}
-PERL_STATIC_INLINE bool*
-S_get_invlist_offset_addr(pTHX_ SV* invlist)
-{
- /* Return the address of the field that says whether the inversion list is
- * offset (it contains 1) or not (contains 0) */
-
- PERL_ARGS_ASSERT_GET_INVLIST_OFFSET_ADDR;
-
- return &(((XINVLIST*) SvANY(invlist))->is_offset);
-}
-
#ifndef PERL_IN_XSUB_RE
SV*
Perl__new_invlist(pTHX_ IV initial_size)
PERL_ARGS_ASSERT_INVLIST_EXTEND;
+ assert(SvTYPE(invlist) == SVt_INVLIST);
+
/* Add one to account for the zero element at the beginning which may not
* be counted by the calling parameters */
SvGROW((SV *)invlist, TO_INTERNAL_SIZE(new_max + 1));
{
PERL_ARGS_ASSERT_INVLIST_TRIM;
+ assert(SvTYPE(invlist) == SVt_INVLIST);
+
/* Change the length of the inversion list to how many entries it currently
* has */
SvPV_shrink_to_cur((SV *) invlist);
assert(a != b);
/* Special case if either one is empty */
- len_a = _invlist_len(a);
+ len_a = (a == NULL) ? 0 : _invlist_len(a);
if ((len_a == 0) || ((len_b = _invlist_len(b)) == 0)) {
if (len_a != 0 && complement_b) {
* must be every possible code point. Thus the intersection is
* simply 'a'. */
if (*i != a) {
- *i = invlist_clone(a);
-
if (*i == b) {
SvREFCNT_dec_NN(b);
}
+
+ *i = invlist_clone(a);
}
/* else *i is already 'a' */
return;
* have a zero; removes it otherwise. As described above, the data
* structure is set up so that this is very efficient */
- STRLEN* len_pos = _get_invlist_len_addr(invlist);
-
PERL_ARGS_ASSERT__INVLIST_INVERT;
assert(! invlist_is_iterating(invlist));
/* The inverse of matching nothing is matching everything */
- if (*len_pos == 0) {
+ if (_invlist_len(invlist) == 0) {
_append_range_to_invlist(invlist, 0, UV_MAX);
return;
}
- /* The exclusive or complents 0 to 1; and 1 to 0. If the result is 1, the
- * zero element was a 0, so it is being removed, so the length decrements
- * by 1; and vice-versa. SvCUR is unaffected */
- if (*get_invlist_offset_addr(invlist) ^= 1) {
- (*len_pos)--;
- }
- else {
- (*len_pos)++;
- }
+ *get_invlist_offset_addr(invlist) = ! *get_invlist_offset_addr(invlist);
}
void
PERL_ARGS_ASSERT_GET_INVLIST_ITER_ADDR;
+ assert(SvTYPE(invlist) == SVt_INVLIST);
+
return &(((XINVLIST*) SvANY(invlist))->iterator);
}
}
#endif
-#ifdef PERL_ARGS_ASSERT__INVLIST_DUMP
+#ifndef PERL_IN_XSUB_RE
void
-Perl__invlist_dump(pTHX_ SV* const invlist, const char * const header)
+Perl__invlist_dump(pTHX_ PerlIO *file, I32 level, const char * const indent, SV* const invlist)
{
- /* Dumps out the ranges in an inversion list. The string 'header'
- * if present is output on a line before the first range */
+ /* Designed to be called only by do_sv_dump(). Dumps out the ranges of the
+ * inversion list 'invlist' to 'file' at 'level' Each line is prefixed by
+ * the string 'indent'. The output looks like this:
+ [0] 0x000A .. 0x000D
+ [2] 0x0085
+ [4] 0x2028 .. 0x2029
+ [6] 0x3104 .. INFINITY
+ * This means that the first range of code points matched by the list are
+ * 0xA through 0xD; the second range contains only the single code point
+ * 0x85, etc. An inversion list is an array of UVs. Two array elements
+ * are used to define each range (except if the final range extends to
+ * infinity, only a single element is needed). The array index of the
+ * first element for the corresponding range is given in brackets. */
UV start, end;
+ STRLEN count = 0;
PERL_ARGS_ASSERT__INVLIST_DUMP;
- if (header && strlen(header)) {
- PerlIO_printf(Perl_debug_log, "%s\n", header);
- }
if (invlist_is_iterating(invlist)) {
- PerlIO_printf(Perl_debug_log, "Can't dump because is in middle of iterating\n");
+ Perl_dump_indent(aTHX_ level, file,
+ "%sCan't dump inversion list because is in middle of iterating\n",
+ indent);
return;
}
invlist_iterinit(invlist);
while (invlist_iternext(invlist, &start, &end)) {
if (end == UV_MAX) {
- PerlIO_printf(Perl_debug_log, "0x%04"UVXf" .. INFINITY\n", start);
+ Perl_dump_indent(aTHX_ level, file,
+ "%s[%"UVuf"] 0x%04"UVXf" .. INFINITY\n",
+ indent, (UV)count, start);
}
else if (end != start) {
- PerlIO_printf(Perl_debug_log, "0x%04"UVXf" .. 0x%04"UVXf"\n",
- start, end);
+ Perl_dump_indent(aTHX_ level, file,
+ "%s[%"UVuf"] 0x%04"UVXf" .. 0x%04"UVXf"\n",
+ indent, (UV)count, start, end);
}
else {
- PerlIO_printf(Perl_debug_log, "0x%04"UVXf"\n", start);
+ Perl_dump_indent(aTHX_ level, file, "%s[%"UVuf"] 0x%04"UVXf"\n",
+ indent, (UV)count, start);
}
+ count += 2;
}
}
#endif
-#if 0
+#ifdef PERL_ARGS_ASSERT__INVLISTEQ
bool
S__invlistEQ(pTHX_ SV* const a, SV* const b, const bool complement_b)
{
* at the 0 that is always stored immediately before the array. */
array_b--;
len_b++;
- array_b[0] = 0;
}
}
defchar: {
STRLEN len = 0;
- UV ender;
+ UV ender = 0;
char *p;
char *s;
#define MAX_NODE_STRING_SIZE 127
char *s0;
U8 upper_parse = MAX_NODE_STRING_SIZE;
STRLEN foldlen;
- U8 node_type;
+ U8 node_type = compute_EXACTish(pRExC_state);
bool next_is_quantifier;
char * oldp = NULL;
+ /* We can convert EXACTF nodes to EXACTFU if they contain only
+ * characters that match identically regardless of the target
+ * string's UTF8ness. The reason to do this is that EXACTF is not
+ * trie-able, EXACTFU is. (We don't need to figure this out until
+ * pass 2) */
+ bool maybe_exactfu = node_type == EXACTF && PASS2;
+
/* If a folding node contains only code points that don't
* participate in folds, it can be changed into an EXACT node,
* which allows the optimizer more things to look for */
bool maybe_exact;
- ender = 0;
- node_type = compute_EXACTish(pRExC_state);
ret = reg_node(pRExC_state, node_type);
/* In pass1, folded, we use a temporary buffer instead of the
/* We do the EXACTFish to EXACT node only if folding, and not if in
* locale, as whether a character folds or not isn't known until
- * runtime */
- maybe_exact = FOLD && ! LOC;
+ * runtime. (And we don't need to figure this out until pass 2) */
+ maybe_exact = FOLD && ! LOC && PASS2;
/* XXX The node can hold up to 255 bytes, yet this only goes to
* 127. I (khw) do not know why. Keeping it somewhat less than
|| (node_type == EXACTFU
&& ender == LATIN_SMALL_LETTER_SHARP_S)))
{
+ if (IS_IN_SOME_FOLD_L1(ender)) {
+ maybe_exact = FALSE;
+
+ /* See if the character's fold differs between /d and
+ * /u. This includes the multi-char fold SHARP S to
+ * 'ss' */
+ if (maybe_exactfu
+ && (PL_fold[ender] != PL_fold_latin1[ender]
+ || ender == LATIN_SMALL_LETTER_SHARP_S
+ || (len > 0
+ && isARG2_lower_or_UPPER_ARG1('s', ender)
+ && isARG2_lower_or_UPPER_ARG1('s', *(s-1)))))
+ {
+ maybe_exactfu = FALSE;
+ }
+ }
*(s++) = (char) ender;
- maybe_exact &= ! IS_IN_SOME_FOLD_L1(ender);
}
else { /* UTF */
* do any better */
if (len == 0) {
len = full_len;
+
+ /* If the node ends in an 's' we make sure it stays EXACTF,
+ * as if it turns into an EXACTFU, it could later get
+ * joined with another 's' that would then wrongly match
+ * the sharp s */
+ if (maybe_exactfu && isARG2_lower_or_UPPER_ARG1('s', ender))
+ {
+ maybe_exactfu = FALSE;
+ }
} else {
/* Here, the node does contain some characters that aren't
if (len == 0) {
OP(ret) = NOTHING;
}
- else{
-
- /* If 'maybe_exact' is still set here, means there are no
- * code points in the node that participate in folds */
- if (FOLD && maybe_exact) {
- OP(ret) = EXACT;
+ else {
+ if (FOLD) {
+ /* If 'maybe_exact' is still set here, means there are no
+ * code points in the node that participate in folds;
+ * similarly for 'maybe_exactfu' and code points that match
+ * differently depending on UTF8ness of the target string
+ * */
+ if (maybe_exact) {
+ OP(ret) = EXACT;
+ }
+ else if (maybe_exactfu) {
+ OP(ret) = EXACTFU;
+ }
}
alloc_maybe_populate_EXACT(pRExC_state, ret, flagp, len, ender);
}
for (i = start; i <= (int) high; i++) {
if (! ANYOF_BITMAP_TEST(ret, i)) {
ANYOF_BITMAP_SET(ret, i);
- prevvalue = value;
- value = i;
}
}
}
)
);
if ( IS_ANYOF_TRIE(op) || trie->bitmap ) {
- int i;
- int rangestart = -1;
- U8* bitmap = IS_ANYOF_TRIE(op) ? (U8*)ANYOF_BITMAP(o) : (U8*)TRIE_BITMAP(trie);
sv_catpvs(sv, "[");
- for (i = 0; i <= 256; i++) {
- if (i < 256 && BITMAP_TEST(bitmap,i)) {
- if (rangestart == -1)
- rangestart = i;
- } else if (rangestart != -1) {
- if (i <= rangestart + 3)
- for (; rangestart < i; rangestart++)
- put_byte(sv, rangestart);
- else {
- put_byte(sv, rangestart);
- sv_catpvs(sv, "-");
- put_byte(sv, i - 1);
- }
- rangestart = -1;
- }
- }
+ (void) put_latin1_charclass_innards(sv, IS_ANYOF_TRIE(op)
+ ? ANYOF_BITMAP(o)
+ : TRIE_BITMAP(trie));
sv_catpvs(sv, "]");
}
} else if (k == LOGICAL)
Perl_sv_catpvf(aTHX_ sv, "[%d]", o->flags); /* 2: embedded, otherwise 1 */
else if (k == ANYOF) {
- int i, rangestart = -1;
const U8 flags = ANYOF_FLAGS(o);
int do_sep = 0;
sv_catpvs(sv, "^");
/* output what the standard cp 0-255 bitmap matches */
- for (i = 0; i <= 256; i++) {
- if (i < 256 && ANYOF_BITMAP_TEST(o,i)) {
- if (rangestart == -1)
- rangestart = i;
- } else if (rangestart != -1) {
- if (i <= rangestart + 3)
- for (; rangestart < i; rangestart++)
- put_byte(sv, rangestart);
- else {
- put_byte(sv, rangestart);
- sv_catpvs(sv, "-");
- put_byte(sv, i - 1);
- }
- do_sep = 1;
- rangestart = -1;
- }
- }
+ do_sep = put_latin1_charclass_innards(sv, ANYOF_BITMAP(o));
EMIT_ANYOF_TEST_SEPARATOR(do_sep,sv,flags);
/* output any special charclass tests (used entirely under use locale) */
- if (ANYOF_CLASS_TEST_ANY_SET(o))
- for (i = 0; i < (int)(sizeof(anyofs)/sizeof(char*)); i++)
+ if (ANYOF_CLASS_TEST_ANY_SET(o)) {
+ int i;
+ for (i = 0; i < (int)(sizeof(anyofs)/sizeof(char*)); i++) {
if (ANYOF_CLASS_TEST(o,i)) {
sv_catpv(sv, anyofs[i]);
do_sep = 1;
}
+ }
+ }
EMIT_ANYOF_TEST_SEPARATOR(do_sep,sv,flags);
/* output information about the unicode matching */
if (flags & ANYOF_UNICODE_ALL)
sv_catpvs(sv, "{unicode_all}");
- else if (ANYOF_NONBITMAP(o))
- sv_catpvs(sv, "{unicode}");
- if (flags & ANYOF_NONBITMAP_NON_UTF8)
- sv_catpvs(sv, "{outside bitmap}");
-
- if (ANYOF_NONBITMAP(o)) {
- SV *lv; /* Set if there is something outside the bit map */
- SV * const sw = regclass_swash(prog, o, FALSE, &lv, NULL);
+ else if (ANYOF_NONBITMAP(o)) {
+ SV *lv; /* Set if there is something outside the bit map. */
bool byte_output = FALSE; /* If something in the bitmap has been
output */
- if (lv && lv != &PL_sv_undef) {
- if (sw) {
- U8 s[UTF8_MAXBYTES_CASE+1];
-
- for (i = 0; i <= 256; i++) { /* Look at chars in bitmap */
- uvchr_to_utf8(s, i);
-
- if (i < 256
- && ! ANYOF_BITMAP_TEST(o, i) /* Don't duplicate
- things already
- output as part
- of the bitmap */
- && swash_fetch(sw, s, TRUE))
- {
- if (rangestart == -1)
- rangestart = i;
- } else if (rangestart != -1) {
- byte_output = TRUE;
- if (i <= rangestart + 3)
- for (; rangestart < i; rangestart++) {
- put_byte(sv, rangestart);
- }
- else {
- put_byte(sv, rangestart);
- sv_catpvs(sv, "-");
- put_byte(sv, i-1);
- }
- rangestart = -1;
- }
- }
- }
+ if (flags & ANYOF_NONBITMAP_NON_UTF8) {
+ sv_catpvs(sv, "{outside bitmap}");
+ }
+ else {
+ sv_catpvs(sv, "{utf8}");
+ }
- {
- char *s = savesvpv(lv);
- char * const origs = s;
+ /* Get the stuff that wasn't in the bitmap */
+ (void) regclass_swash(prog, o, FALSE, &lv, NULL);
+ if (lv && lv != &PL_sv_undef) {
+ char *s = savesvpv(lv);
+ char * const origs = s;
- while (*s && *s != '\n')
- s++;
+ while (*s && *s != '\n')
+ s++;
- if (*s == '\n') {
- const char * const t = ++s;
+ if (*s == '\n') {
+ const char * const t = ++s;
- if (byte_output) {
- sv_catpvs(sv, " ");
- }
+ if (byte_output) {
+ sv_catpvs(sv, " ");
+ }
- while (*s) {
- if (*s == '\n') {
+ while (*s) {
+ if (*s == '\n') {
- /* Truncate very long output */
- if (s - origs > 256) {
- Perl_sv_catpvf(aTHX_ sv,
- "%.*s...",
- (int) (s - origs - 1),
- t);
- goto out_dump;
- }
- *s = ' ';
- }
- else if (*s == '\t') {
- *s = '-';
- }
- s++;
- }
- if (s[-1] == ' ')
- s[-1] = 0;
+ /* Truncate very long output */
+ if (s - origs > 256) {
+ Perl_sv_catpvf(aTHX_ sv,
+ "%.*s...",
+ (int) (s - origs - 1),
+ t);
+ goto out_dump;
+ }
+ *s = ' ';
+ }
+ else if (*s == '\t') {
+ *s = '-';
+ }
+ s++;
+ }
+ if (s[-1] == ' ')
+ s[-1] = 0;
- sv_catpv(sv, t);
- }
+ sv_catpv(sv, t);
+ }
- out_dump:
+ out_dump:
- Safefree(origs);
- }
+ Safefree(origs);
SvREFCNT_dec_NN(lv);
}
}
so we need to copy it locally. */
RX_WRAPPED(dstr) = SAVEPVN(RX_WRAPPED(sstr), SvCUR(sstr)+1);
ret->mother_re = NULL;
- ret->gofs = 0;
}
#endif /* PERL_IN_XSUB_RE */
So the old condition can be simplified to !isPRINT(c) */
if (!isPRINT(c)) {
- if (c < 256) {
- Perl_sv_catpvf(aTHX_ sv, "\\x%02x", c);
- }
- else {
- Perl_sv_catpvf(aTHX_ sv, "\\x{%x}", c);
- }
+ switch (c) {
+ case '\r': Perl_sv_catpvf(aTHX_ sv, "\\r"); break;
+ case '\n': Perl_sv_catpvf(aTHX_ sv, "\\n"); break;
+ case '\t': Perl_sv_catpvf(aTHX_ sv, "\\t"); break;
+ case '\f': Perl_sv_catpvf(aTHX_ sv, "\\f"); break;
+ case '\a': Perl_sv_catpvf(aTHX_ sv, "\\a"); break;
+
+ default:
+ Perl_sv_catpvf(aTHX_ sv, "\\x{%x}", c);
+ break;
+ }
}
else {
const char string = c;
}
}
+STATIC bool
+S_put_latin1_charclass_innards(pTHX_ SV *sv, char *bitmap)
+{
+ /* Appends to 'sv' a displayable version of the innards of the bracketed
+ * character class whose bitmap is 'bitmap'; Returns 'TRUE' if it actually
+ * output anything */
+
+ int i;
+ int rangestart = -1;
+ bool has_output_anything = FALSE;
+
+ PERL_ARGS_ASSERT_PUT_LATIN1_CHARCLASS_INNARDS;
+
+ for (i = 0; i <= 256; i++) {
+ if (i < 256 && BITMAP_TEST((U8 *) bitmap,i)) {
+ if (rangestart == -1)
+ rangestart = i;
+ } else if (rangestart != -1) {
+ int j = i - 1;
+ if (i <= rangestart + 3) { /* Individual chars in short ranges */
+ for (; rangestart < i; rangestart++)
+ put_byte(sv, rangestart);
+ }
+ else if ( j > 255
+ || ! isALPHANUMERIC(rangestart)
+ || ! isALPHANUMERIC(j)
+ || isDIGIT(rangestart) != isDIGIT(j)
+ || isUPPER(rangestart) != isUPPER(j)
+ || isLOWER(rangestart) != isLOWER(j)
+
+ /* This final test should get optimized out except
+ * on EBCDIC platforms, where it causes ranges that
+ * cross discontinuities like i/j to be shown as hex
+ * instead of the misleading, e.g. H-K (since that
+ * range includes more than H, I, J, K). */
+ || (j - rangestart)
+ != NATIVE_TO_ASCII(j) - NATIVE_TO_ASCII(rangestart))
+ {
+ Perl_sv_catpvf(aTHX_ sv, "\\x{%02x}-\\x{%02x}",
+ rangestart,
+ (j < 256) ? j : 255);
+ }
+ else { /* Here, the ends of the range are both digits, or both
+ uppercase, or both lowercase; and there's no
+ discontinuity in the range (which could happen on EBCDIC
+ platforms) */
+ put_byte(sv, rangestart);
+ sv_catpvs(sv, "-");
+ put_byte(sv, j);
+ }
+ rangestart = -1;
+ has_output_anything = TRUE;
+ }
+ }
+
+ return has_output_anything;
+}
#define CLEAR_OPTSTART \
if (optstart) STMT_START { \
https://perl5.git.perl.org / perl5.git / blobdiff