# Additional info from Nigel Head <nhead@ESOC.bitnet>
# and Kenneth Albanowski <kjahds@kjahds.com>
#
-# Consolidated by Andy Dougherty <doughera@lafcol.lafayette.edu>
+# Consolidated by Andy Dougherty <doughera@lafayette.edu>
#
# Updated Thu Feb 8 11:56:10 EST 1996
-# Updated Thu May 30 10:50:22 EDT 1996 by <doughera@lafcol.lafayette.edu>
+# Updated Thu May 30 10:50:22 EDT 1996 by <doughera@lafayette.edu>
# Updated Fri Jun 21 11:07:54 EDT 1996
# NDBM support for ELF renabled by <kjahds@kjahds.com>
# do the implicit mapping.
ignore_versioned_solibs='y'
-# perl goes into the /usr tree. See the Filesystem Standard
-# available via anonymous FTP at tsx-11.mit.edu in
-# /pub/linux/docs/linux-standards/fsstnd.
-# Allow a command line override, e.g. Configure -Dprefix=/foo/bar
-#
-# Addendum for 5.005_57 and beyond:
-#
-# However, most Linux users probably already have a /usr/bin/perl.
-# We can't know whether the current user is intending to *replace*
-# that /usr/bin/perl or whether the user is intending to install
-# a *different* installation.
-#
-# Here is what we used to do:
-# Allow a command line override, e.g. Configure -Dprefix=/foo/bar
-# case "$prefix" in
-# '') prefix='/usr' ;;
-# esac
-#
-# For now, let's assume that most Linux users get their /usr/bin/perl
-# from some packaging system, so that those compiling from source are
-# probably the more experimental folks and hence probably aren't
-# intending to replace /usr/bin/perl (at least just yet).
-# This change makes linux consistent with most other unix platforms
-# in having a default of prefix=/usr/local.
-# These notes can probably safely be removed in 5.005_50 and beyond.
-#
-# 9 April 1999 Andy Dougherty <doughera@lafayette.edu>
-#
-
# BSD compatability library no longer needed
# 'kaffe' has a /usr/lib/libnet.so which is not at all relevent for perl.
set `echo X "$libswanted "| sed -e 's/ bsd / /' -e 's/ net / /'`
# If you have glibc, then report the version for ./myconfig bug reporting.
# (Configure doesn't need to know the specific version since it just uses
# gcc to load the library for all tests.)
-# Is this sufficiently robust for libc5 systems as well as
-# glibc-2.1.x systems?
-# We don't use __GLIBC__ and __GLIBC_MINOR__ because they
+# We don't use __GLIBC__ and __GLIBC_MINOR__ because they
# are insufficiently precise to distinguish things like
# libc-2.0.6 and libc-2.0.7.
if test -L /lib/libc.so.6; then
# function in <sys/stat.h>.
d_lstat=define
-# Explanation?
+# malloc wrap works
+case "$usemallocwrap" in
+'') usemallocwrap='define' ;;
+esac
+
+# The system malloc() is about as fast and as frugal as perl's.
+# Since the system malloc() has been the default since at least
+# 5.001, we might as well leave it that way. --AD 10 Jan 2002
case "$usemymalloc" in
'') usemymalloc='n' ;;
esac
+# Check if we're about to use Intel's ICC compiler
+case "`${cc:-cc} -V 2>&1`" in
+*"Intel(R) C++ Compiler"*)
+ # This is needed for Configure's prototype checks to work correctly
+ ccflags="-we147 $ccflags"
+ # If we're using ICC, we usually want the best performance
+ case "$optimize" in
+ '') optimize='-O3' ;;
+ esac
+ ;;
+esac
+
case "$optimize" in
-'') # If we have modern enough gcc and well-supported enough CPU,
- # crank up the optimization level.
- case "`${cc:-gcc} -v 2>&1`" in
- *"gcc version 2.95"*|*"gcc version 3."*)
- case "`arch 2>&1`" in
- i?86|ppc) optimize='-O3' ;;
- esac
+# use -O2 by default ; -O3 doesn't seem to bring significant benefits with gcc
+'')
+ optimize='-O2'
+ case "`uname -m`" in
+ ppc*)
+ # on ppc, it seems that gcc (at least gcc 3.3.2) isn't happy
+ # with -O2 ; so downgrade to -O1.
+ optimize='-O1'
;;
esac
- case "$optimize" in
- '') optimize='-O2' ;;
- esac
;;
esac
If dynamic loading doesn't work, read hints/linux.sh for further information.
EOM
-#For RedHat Linux 3.0.3, you may need to fetch
-# ftp://ftp.redhat.com/pub/redhat-3.0.3/i386/updates/RPMS/ld.so-1.7.14-3.i386.rpm
-#
-
else
cat <<'EOM' >&4
#so='none'
# In addition, on some systems there is a problem with perl and NDBM
- # which causes AnyDBM and NDBM_File to lock up. This is evidenced
- # in the tests as AnyDBM just freezing. Apparently, this only
+ # which causes AnyDBM and NDBM_File to lock up. This is evidenced
+ # in the tests as AnyDBM just freezing. Apparently, this only
# happens on a.out systems, so we disable NDBM for all a.out linux
# systems. If someone can suggest a more robust test
# that would be appreciated.
# just as advertised. Checking into it, I found that the lockup was
# during the call to dbm_open. Not *in* dbm_open -- but between the call
# to and the jump into.
- #
+ #
# To make a long story short, making sure that the *.a and *.sa pairs of
# /usr/lib/lib{m,db,gdbm}.{a,sa}
# were perfectly in sync took care of it.
# Shimpei Yamashita <shimpei@socrates.patnet.caltech.edu>
# Message-Id: <33EF1634.B36B6500@pobox.com>
-#
+#
# The DR2 of MkLinux (osname=linux,archname=ppc-linux) may need
# special flags passed in order for dynamic loading to work.
# instead of the recommended:
#
# ccdlflags='-rdynamic'
-#
+#
# it should be:
# ccdlflags='-Wl,-E'
#
#'osfmach3ppc') ccdlflags='-Wl,-E' ;;
#esac
-case "`uname -r`" in
-sparc-linux)
+case "`uname -m`" in
+sparc*)
case "$cccdlflags" in
*-fpic*) cccdlflags="`echo $cccdlflags|sed 's/-fpic/-fPIC/'`" ;;
*) cccdlflags="$cccdlflags -fPIC" ;;
;;
esac
-# This script UU/usethreads.cbu will get 'called-back' by Configure
+# SuSE8.2 has /usr/lib/libndbm* which are ld scripts rather than
+# true libraries. The scripts cause binding against static
+# version of -lgdbm which is a bad idea. So if we have 'nm'
+# make sure it can read the file
+# NI-S 2003/08/07
+if [ -r /usr/lib/libndbm.so -a -x /usr/bin/nm ] ; then
+ if /usr/bin/nm /usr/lib/libndbm.so >/dev/null 2>&1 ; then
+ echo 'Your shared -lndbm seems to be a real library.'
+ else
+ echo 'Your shared -lndbm is not a real library.'
+ set `echo X "$libswanted "| sed -e 's/ ndbm / /'`
+ shift
+ libswanted="$*"
+ fi
+fi
+
+
+# This script UU/usethreads.cbu will get 'called-back' by Configure
# after it has prompted the user for whether to use threads.
cat > UU/usethreads.cbu <<'EOCBU'
case "$usethreads" in
$define|true|[yY]*)
- ccflags="-D_REENTRANT $ccflags"
+ ccflags="-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS $ccflags"
set `echo X "$libswanted "| sed -e 's/ c / pthread c /'`
shift
libswanted="$*"
+
+ # Somehow at least in Debian 2.2 these manage to escape
+ # the #define forest of <features.h> and <time.h> so that
+ # the hasproto macro of Configure doesn't see these protos,
+ # even with the -D_GNU_SOURCE.
+
+ d_asctime_r_proto="$define"
+ d_crypt_r_proto="$define"
+ d_ctime_r_proto="$define"
+ d_gmtime_r_proto="$define"
+ d_localtime_r_proto="$define"
+ d_random_r_proto="$define"
+
;;
esac
EOCBU
cat > UU/uselargefiles.cbu <<'EOCBU'
-# This script UU/uselargefiles.cbu will get 'called-back' by Configure
+# This script UU/uselargefiles.cbu will get 'called-back' by Configure
# after it has prompted the user for whether to use large files.
case "$uselargefiles" in
''|$define|true|[yY]*)
https://perl5.git.perl.org / perl5.git / blobdiff