# Makefile to build perl on Windows using DMAKE.
# Supported compilers:
# Microsoft Visual C++ 6.0 or later
-# Borland C++ 5.02 or later
# MinGW with gcc-3.2 or later
-# Windows SDK 64-bit compiler and tools **experimental**
+# Windows SDK 64-bit compiler and tools
#
# This is set up to build a perl.exe that runs off a shared library
-# (perl513.dll). Also makes individual DLLs for the XS extensions.
+# (perl515.dll). Also makes individual DLLs for the XS extensions.
#
##
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-#INST_VER *= \5.13.5
+#INST_VER *= \5.15.8
#
# Comment this out if you DON'T want your perl installation to have
#CCTYPE *= MSVC70FREE
# Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
#CCTYPE *= MSVC70
+# Windows Server 2003 SP1 Platform SDK (April 2005)
+#CCTYPE = SDK2003SP1
# Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
#CCTYPE *= MSVC80FREE
# Visual C++ 2005 (aka Visual C++ 8.x) (full version)
#CCTYPE *= MSVC90FREE
# Visual C++ 2008 (aka Visual C++ 9.x) (full version)
#CCTYPE *= MSVC90
-# Borland 5.02 or later
-#CCTYPE *= BORLAND
+# Visual C++ 2010 Express Edition (aka Visual C++ 10.x) (free version)
+#CCTYPE = MSVC100FREE
+# Visual C++ 2010 (aka Visual C++ 10.x) (full version)
+#CCTYPE = MSVC100
# MinGW or mingw-w64 with gcc-3.2 or later
CCTYPE *= GCC
#
-# uncomment this if your Borland compiler is older than v5.4.
-#BCCOLD *= define
-#
-# uncomment this if you want to use Borland's VCL as your CRT
-#BCCVCL *= define
-
-#
-# uncomment this if you are compiling under Windows 95/98 and command.com
-# (not needed if you're running under 4DOS/NT 6.01 or later)
-#IS_WIN95 *= define
-
-#
# uncomment next line if you want debug version of perl (big,slow)
# If not enabled, we automatically try to use maximum optimization
# with all compilers that are known to have a working optimizer.
#USE_SETARGV *= define
#
-# if you want to have the crypt() builtin function implemented, leave this or
-# CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
-# version of des_fcrypt().
-#
-CRYPT_SRC *= fcrypt.c
-
-#
-# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
-# library, uncomment this, and make sure the library exists (see README.win32)
-# Specify the full pathname of the library.
-#
-#CRYPT_LIB *= fcrypt.lib
-
-#
# set this if you wish to use perl's malloc
# WARNING: Turning this on/off WILL break binary compatibility with extensions
# you may have compiled with/without it. Be prepared to recompile all
# set this to additionally provide a statically linked perl-static.exe.
# Note that dynamic loading will not work with this perl, so you must
# include required modules statically using the STATIC_EXT or ALL_STATIC
-# variables below. A static library perl513s.lib will also be created.
+# variables below. A static library perl515s.lib will also be created.
# Ordinary perl.exe is not affected by this option.
#
#BUILD_STATIC *= define
# so you may have to set CCHOME explicitly (spaces in the path name should
# not be quoted)
#
-.IF "$(CCTYPE)" == "BORLAND"
-CCHOME *= C:\Borland\BCC55
-.ELIF "$(CCTYPE)" == "GCC"
+.IF "$(CCTYPE)" == "GCC"
CCHOME *= C:\MinGW
.ELSE
CCHOME *= $(MSVCDIR)
.ENDIF
#
-# If building with gcc-4.x.x (or x86_64-w64-mingw32-gcc-4.x.x), then
-# uncomment the following assignment to GCC_4XX, make sure that CCHOME
-# has been set correctly above, and uncomment the appropriate
-# GCCHELPERDLL line.
-# The name of the dll can change, depending upon which vendor has supplied
-# your 4.x.x compiler, and upon the values of "x".
-# (The dll will be in your mingw/bin folder, so check there if you're
-# unsure about the correct name.)
-# Without these corrections, the op/taint.t test script will fail.
-#
-#GCC_4XX *= define
-#GCCHELPERDLL *= $(CCHOME)\bin\libgcc_s_sjlj-1.dll
-#GCCHELPERDLL *= $(CCHOME)\bin\libgcc_s_dw2-1.dll
-#GCCHELPERDLL *= $(CCHOME)\bin\libgcc_s_1.dll
-
-#
# uncomment this if you are using x86_64-w64-mingw32 cross-compiler
# ie if your gcc executable is called 'x86_64-w64-mingw32-gcc'
# instead of the usual 'gcc'.
BUILDOPT *= $(BUILDOPTEXTRA)
#
-# Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
-# internal hash function unless the PERL_HASH_SEED environment variable is set.
-# Alternatively, adding -DNO_HASH_SEED will completely disable the
-# randomization feature.
-# The latter is required to maintain binary compatibility with Perl 5.8.0.
-#
-#BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
-#BUILDOPT += -DNO_HASH_SEED
-
-#
# This should normally be disabled. Enabling it will disable the File::Glob
# implementation of CORE::glob.
#
#BUILDOPT += -DPERL_EXTERNAL_GLOB
#
-# This should normally be disabled. Enabling it causes perl to read scripts
-# in text mode (which is the 5.005 behavior) and will break ByteLoader.
+# Perl needs to read scripts in text mode so that the DATA filehandle
+# works correctly with seek() and tell(), or around auto-flushes of
+# all filehandles (e.g. by system(), backticks, fork(), etc).
#
-#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
+# The current version on the ByteLoader module on CPAN however only
+# works if scripts are read in binary mode. But before you disable text
+# mode script reading (and break some DATA filehandle functionality)
+# please check first if an updated ByteLoader isn't available on CPAN.
+#
+BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
#
# specify semicolon-separated list of extra directories that modules will
##################### CHANGE THESE ONLY IF YOU MUST #####################
-.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
-D_CRYPT = undef
-.ELSE
-D_CRYPT = define
-CRYPT_FLAG = -DHAVE_DES_FCRYPT
-.ENDIF
-
PERL_MALLOC *= undef
DEBUG_MSTATS *= undef
.ENDIF
.ENDIF
+# Treat 64-bit MSVC60 (doesn't really exist) as SDK2003SP1 because
+# both link against MSVCRT.dll (which is part of Windows itself) and
+# not against a compiler specific versioned runtime.
+.IF "$(WIN64)" == "define" && "$(CCTYPE)" == "MSVC60"
+CCTYPE = SDK2003SP1
+.ENDIF
+
ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
.IF "$(ARCHITECTURE)" == "AMD64"
ARCHITECTURE = x64
ARCHNAME !:= $(ARCHNAME)-thread
.ENDIF
-# Visual C++ 98, .NET 2003, 2005 and 2008 specific.
-# VC++ 6.x, 7.x, 8.x and 9.x can load DLL's on demand. Makes the test suite run
+# Visual C++ 98, .NET 2003, 2005/2008/2010 specific.
+# VC++ 6/7/8/9/10.x can load DLLs on demand. Makes the test suite run
# in about 10% less time. (The free version of 7.x can't do this, but the free
-# versions of 8.x and 9.x can.)
+# versions of 8/9/10.x can.)
.IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
- "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" ||
- "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
+ "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
+ "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \
+ "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE"
DELAYLOAD *= -DELAYLOAD:ws2_32.dll delayimp.lib
.ENDIF
.USESHELL :
-.IF "$(CCTYPE)" == "BORLAND"
-
-CC = bcc32
-.IF "$(BCCOLD)" != "define"
-LINK32 = ilink32
-.ELSE
-LINK32 = tlink32
-.ENDIF
-LIB32 = tlib /a /P128
-IMPLIB = implib -c
-RSC = brcc32
-
-#
-# Options
-#
-INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
-#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
-DEFINES = -DWIN32 $(CRYPT_FLAG)
-LOCDEFS = -DPERLDLL -DPERL_CORE
-SUBSYS = console
-CXX_FLAG = -P
-
-LIBC = cw32mti.lib
-
-# same libs as MSVC, except Borland doesn't have oldnames.lib
-LIBFILES = $(CRYPT_LIB) \
- kernel32.lib user32.lib gdi32.lib winspool.lib \
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
- netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
- version.lib odbc32.lib odbccp32.lib comctl32.lib \
- import32.lib $(LIBC)
-
-.IF "$(CFG)" == "Debug"
-OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
-LINK_DBG = -v
-.ELSE
-OPTIMIZE = -O2 -D_RTLDLL
-LINK_DBG =
-.ENDIF
-
-EXTRACFLAGS =
-CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
- $(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = $(LINK_DBG) -x -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
- -L"$(CCLIBDIR)\PSDK"
-OBJOUT_FLAG = -o
-EXEOUT_FLAG = -e
-LIBOUT_FLAG =
-.IF "$(BCCOLD)" != "define"
-LINK_FLAGS += -Gn
-DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
-.END
-.IF "$(BCCVCL)" == "define"
-LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
-LINK_FLAGS += -L"$(CCLIBDIR)\Release"
-.END
-
-
-.ELIF "$(CCTYPE)" == "GCC"
+.IF "$(CCTYPE)" == "GCC"
.IF "$(GCCCROSS)" == "define"
ARCHPREFIX = x86_64-w64-mingw32-
#
INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
-DEFINES = -DWIN32 $(CRYPT_FLAG)
+DEFINES = -DWIN32
.IF "$(WIN64)" == "define"
DEFINES += -DWIN64 -DCONSERVATIVE
.ENDIF
#LIBC = -lmsvcrt
# same libs as MSVC
-LIBFILES = $(CRYPT_LIB) $(LIBC) \
+LIBFILES = $(LIBC) \
-lmoldname -lkernel32 -luser32 -lgdi32 \
-lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
-loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
EXEOUT_FLAG = -o
LIBOUT_FLAG =
-# NOTE: we assume that GCC uses MSVCRT.DLL
-# See comments about PERL_MSVCRT_READFIX in the "cl" compiler section below.
-BUILDOPT += -fno-strict-aliasing -mms-bitfields -DPERL_MSVCRT_READFIX
+BUILDOPT += -fno-strict-aliasing -mms-bitfields
.ELSE
INCLUDES = -I$(COREDIR) -I.\include -I. -I..
#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
-DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
+DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT
LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
CXX_FLAG = -TP -EHsc
LIBC = msvcrt.lib
.IF "$(CFG)" == "Debug"
-OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
+OPTIMIZE = -Od -MD -Zi -DDEBUGGING
LINK_DBG = -debug
.ELSE
OPTIMIZE = -MD -Zi -DNDEBUG
.IF "$(WIN64)" == "define"
DEFINES += -DWIN64 -DCONSERVATIVE
-OPTIMIZE += -Wp64 -fp:precise
+OPTIMIZE += -fp:precise
.ENDIF
-# For now, silence VC++ 8.x's and 9.x's warnings about "unsafe" CRT functions
+# For now, silence VC++ 8/9/10.x's warnings about "unsafe" CRT functions
# and POSIX CRT function names being deprecated.
.IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
- "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
+ "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \
+ "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE"
DEFINES += -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
.ENDIF
-# Use the MSVCRT read() fix only when using VC++ 6.x or earlier. Later
-# versions use MSVCR70.dll, MSVCR71.dll, etc, which do not require the
-# fix.
-.IF "$(CCTYPE)" == "MSVC60"
-BUILDOPT += -DPERL_MSVCRT_READFIX
+# In VS 2005 (VC++ 8.0) Microsoft changes time_t from 32-bit to
+# 64-bit, even in 32-bit mode. It also provides the _USE_32BIT_TIME_T
+# preprocessor option to revert back to the old functionality for
+# backward compatibility. We define this symbol here for older 32-bit
+# compilers only (which aren't using it at all) for the sole purpose
+# of getting it into $Config{ccflags}. That way if someone builds
+# Perl itself with e.g. VC6 but later installs an XS module using VC8
+# the time_t types will still be compatible.
+.IF "$(WIN64)" == "undef"
+.IF "$(CCTYPE)" == "MSVC60" || \
+ "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC70FREE"
+BUILDOPT += -D_USE_32BIT_TIME_T
+.ENDIF
.ENDIF
-LIBBASEFILES = $(CRYPT_LIB) \
+LIBBASEFILES = \
oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
version.lib odbc32.lib odbccp32.lib comctl32.lib
-# The 64 bit Platform SDK compilers contain a runtime library that doesn't
-# include the buffer overrun verification code used by the /GS switch.
+# The 64 bit Windows Server 2003 SP1 SDK compilers link against MSVCRT.dll, which
+# doesn't include the buffer overrun verification code used by the /GS switch.
# Since the code links against libraries that are compiled with /GS, this
-# "security cookie verification" must be included via bufferoverlow.lib.
-.IF "$(WIN64)" == "define"
+# "security cookie verification" code must be included via bufferoverflow.lib.
+.IF "$(WIN64)" == "define" && "$(CCTYPE)" == "SDK2003SP1"
LIBBASEFILES += bufferoverflowU.lib
.ENDIF
CFLAGS_O = $(CFLAGS) $(BUILDOPT)
.IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
- "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
+ "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \
+ "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE"
LINK_FLAGS += "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'"
.ELSE
RSC_FLAGS = -DINCLUDE_MANIFEST
$(NOOP)
$(o).dll:
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
- $(IMPLIB) $(*B).lib $@
-.ELIF "$(CCTYPE)" == "GCC"
+.IF "$(CCTYPE)" == "GCC"
$(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
$(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
.ELSE
# Unicode data files generated by mktables
UNIDATAFILES = ..\lib\unicore\Decomposition.pl ..\lib\unicore\TestProp.pl \
..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
+ ..\lib\unicore\UCD.pl ..\lib\unicore\Name.pm \
..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst
# Directories of Unicode data files generated by mktables
PL2BAT = bin\pl2bat.pl
-GLOBBAT = bin\perlglob.bat
UTILS = \
..\utils\h2ph \
..\utils\splain \
- ..\utils\dprofpp \
..\utils\perlbug \
..\utils\pl2pm \
..\utils\c2ph \
..\utils\corelist \
..\utils\cpan \
..\utils\xsubpp \
+ ..\utils\pod2html \
..\utils\prove \
..\utils\ptar \
..\utils\ptardiff \
+ ..\utils\ptargrep \
+ ..\utils\zipdetails \
..\utils\cpanp-run-perl \
..\utils\cpanp \
..\utils\cpan2dist \
..\utils\shasum \
..\utils\instmodsh \
- ..\pod\pod2html \
+ ..\utils\json_pp \
..\x2p\find2perl \
..\x2p\psed \
..\x2p\s2p \
bin\perlglob.pl \
bin\search.pl
-.IF "$(CCTYPE)" == "BORLAND"
-
-CFGSH_TMPL = config.bc
-CFGH_TMPL = config_H.bc
-
-.ELIF "$(CCTYPE)" == "GCC"
+.IF "$(CCTYPE)" == "GCC"
.IF "$(WIN64)" == "define"
.IF "$(GCCCROSS)" == "define"
CFGSH_TMPL = config.gc
CFGH_TMPL = config_H.gc
.ENDIF
-PERLIMPLIB = ..\libperl513$(a)
-PERLSTATICLIB = ..\libperl513s$(a)
+PERLIMPLIB = ..\libperl515$(a)
+PERLSTATICLIB = ..\libperl515s$(a)
.ELSE
# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
-PERLIMPLIB *= ..\perl513$(a)
-PERLSTATICLIB *= ..\perl513s$(a)
-PERLDLL = ..\perl513.dll
+PERLIMPLIB *= ..\perl515$(a)
+PERLSTATICLIB *= ..\perl515s$(a)
+PERLDLL = ..\perl515.dll
XCOPY = xcopy /f /r /i /d /y
RCOPY = xcopy /f /r /i /e /d /y
..\mro.c \
..\hv.c \
..\locale.c \
+ ..\keywords.c \
..\mathoms.c \
..\mg.c \
..\numeric.c \
WIN32_SRC = \
.\win32.c \
.\win32sck.c \
- .\win32thread.c
+ .\win32thread.c \
+ .\fcrypt.c
# We need this for miniperl build unless we override canned
# config.h #define building mini\*
WIN32_SRC += .\win32io.c
#.ENDIF
-.IF "$(CRYPT_SRC)" != ""
-WIN32_SRC += .\$(CRYPT_SRC)
-.ENDIF
-
X2P_SRC = \
..\x2p\a2p.c \
..\x2p\hash.c \
UUDMAP_H = ..\uudmap.h
BITCOUNT_H = ..\bitcount.h
+MG_DATA_H = ..\mg_data.h
+GENERATED_HEADERS = $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H)
MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
ld=$(LINK32) ~ \
ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
cf_email=$(EMAIL) ~ \
- d_crypt=$(D_CRYPT) ~ \
d_mymalloc=$(PERL_MALLOC) ~ \
libs=$(LIBFILES:f) ~ \
incpath=$(CCINCDIR) ~ \
LINK_FLAGS=$(LINK_FLAGS) ~ \
optimize=$(OPTIMIZE)
-#
-# set up targets varying between Win95 and WinNT builds
-#
-
-.IF "$(IS_WIN95)" == "define"
-MK2 = .\makefile.95
-RIGHTMAKE = __switch_makefiles
-.ELSE
-MK2 = __not_needed
-RIGHTMAKE =
-.ENDIF
-
-.IMPORT .IGNORE : SystemRoot windir
-
-# Don't just .IMPORT OS from the environment because dmake sets OS itself.
-ENV_OS=$(subst,OS=, $(shell @set OS))
-
-.IF "$(ENV_OS)" == "Windows_NT"
-ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
-.ELSE
-ODBCCP32_DLL = $(windir)\system\odbccp32.dll
-.ENDIF
-
ICWD = -I..\dist\Cwd -I..\dist\Cwd\lib
#
# Top targets
#
-all : CHECKDMAKE .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) $(MK2) \
- $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) MakePPPort \
+all : CHECKDMAKE .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) \
+ $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) MakePPPort \
$(PERLEXE) $(X2P) Extensions Extensions_nonxs $(PERLSTATIC)
regnodes : ..\regnodes.h
-..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
+..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
-reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) $(MK2) \
- $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
+reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) \
+ $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
$(X2P) Extensions_reonly
static: $(PERLEXESTATIC)
#----------------------------------------------------------------
-#-------------------- BEGIN Win95 SPECIFIC ----------------------
-
-# this target is a jump-off point for Win95
-# 1. it switches to the Win95-specific makefile if it exists
-# (__do_switch_makefiles)
-# 2. it prints a message when the Win95-specific one finishes (__done)
-# 3. it then kills this makefile by trying to make __no_such_target
-
-__switch_makefiles: __do_switch_makefiles __done __no_such_target
-
-__do_switch_makefiles:
-.IF "$(NOTFIRST)" != "true"
- if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
-.ELSE
- $(NOOP)
-.ENDIF
-
-.IF "$(NOTFIRST)" != "true"
-__done:
- @echo Build process complete. Ignore any errors after this message.
- @echo Run "dmake test" to test and "dmake install" to install
-
-.ELSE
-# dummy targets for Win95-specific makefile
-
-__done:
- $(NOOP)
-
-__no_such_target:
- $(NOOP)
-
-.ENDIF
-
-# This target is used to generate the new makefile (.\makefile.95) for Win95
-
-.\makefile.95: .\makefile.mk
- $(MINIPERL) genmk95.pl makefile.mk $(MK2)
-
-#--------------------- END Win95 SPECIFIC ---------------------
-
-# a blank target for when builds don't need to do certain things
-# this target added for Win95 port but used to keep the WinNT port able to
-# use this file
-__not_needed:
- $(NOOP)
-
CHECKDMAKE :
.IF "$(NEWDMAKE)" == "define"
$(NOOP)
.ENDIF
$(GLOBEXE) : perlglob$(o)
-.IF "$(CCTYPE)" == "BORLAND"
- $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
- "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
-.ELIF "$(CCTYPE)" == "GCC"
+.IF "$(CCTYPE)" == "GCC"
$(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
.ELSE
$(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
# this target is for when changes to the main config.sh happen.
# edit config.gc, then make perl using GCC in a minimal configuration (i.e.
-# with MULTI, ITHREADS, IMP_SYS, LARGE_FILES, PERLIO and CRYPT off), then make
+# with MULTI, ITHREADS, IMP_SYS, LARGE_FILES and PERLIO off), then make
# this target to regenerate config_H.gc.
# unfortunately, some further manual editing is also then required to restore all
# the special _MSC_VER handling that is otherwise lost.
-# repeat for config.bc and config_H.bc (using BORLAND), except that there is no
-# _MSC_VER stuff in that case.
+# repeat for config.gc64 and config_H.gc64, and again for config.gc64nox and
+# config_H.gc64nox, if you have suitable build environments, otherwise hand-edit
+# them to maintain the same differences with config.gc and config_H.gc as before.
regen_config_h:
$(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
$(CFGSH_TMPL) > ..\config.sh
if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
$(XCOPY) ..\*.h $(COREDIR)\*.*
$(XCOPY) *.h $(COREDIR)\*.*
- $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
$(RCOPY) include $(COREDIR)\*.*
$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)" \
|| $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
+..\lib\buildcustomize.pl: $(MINIPERL) ..\write_buildcustomize.pl
+ $(MINIPERL) -I..\lib ..\write_buildcustomize.pl .. >..\lib\buildcustomize.pl
+
+
$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
-.IF "$(CCTYPE)" == "BORLAND"
- if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
- cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(MINI_OBJ),$@,,$(LIBFILES),)
-.ELIF "$(CCTYPE)" == "GCC"
+.IF "$(CCTYPE)" == "GCC"
$(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
$(mktmp $(LKPRE) $(MINI_OBJ) $(LIBFILES) $(LKPOST))
.ELSE
$(X2P_OBJ) : $(CORE_H)
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl create_perllibst_h.pl
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl create_perllibst_h.pl
$(MINIPERL) -I..\lib create_perllibst_h.pl
$(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
- $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
+ $(BUILDOPT) CCTYPE=$(CCTYPE) TARG_DIR=..\ > perldll.def
$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
- @$(mktmp c0d32$(o) $(PERLDLL_OBJ),$@,, \
- $(shell @type Extensions_static) $(LIBFILES),perldll.def)
- $(IMPLIB) $*.lib $@
-.ELIF "$(CCTYPE)" == "GCC"
+.IF "$(CCTYPE)" == "GCC"
$(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
$(mktmp $(LKPRE) $(PERLDLL_OBJ) \
$(shell @type Extensions_static) \
$(XCOPY) $(PERLIMPLIB) $(COREDIR)
$(PERLSTATICLIB): Extensions_static
-.IF "$(CCTYPE)" == "BORLAND"
- $(LIB32) $(LIB_FLAGS) $@ \
- @$(mktmp $(shell @type Extensions_static) \
- $(PERLDLL_OBJ))
-.ELIF "$(CCTYPE)" == "GCC"
+.IF "$(CCTYPE)" == "GCC"
# XXX: It would be nice if MinGW's ar accepted a temporary file, but this
# doesn't seem to work:
# $(LIB32) $(LIB_FLAGS) $@ \
$(X2P) : $(MINIPERL) $(X2P_OBJ) Extensions
$(MINIPERL) -I..\lib ..\x2p\find2perl.PL
$(MINIPERL) -I..\lib ..\x2p\s2p.PL
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(X2P_OBJ),$@,,$(LIBFILES),)
-.ELIF "$(CCTYPE)" == "GCC"
+.IF "$(CCTYPE)" == "GCC"
$(LINK32) -v -o $@ $(BLINK_FLAGS) \
$(mktmp $(LKPRE) $(X2P_OBJ) $(LIBFILES) $(LKPOST))
.ELSE
$(EMBED_EXE_MANI)
.ENDIF
-$(MINIDIR)\globals$(o) : $(UUDMAP_H) $(BITCOUNT_H)
+$(MINIDIR)\globals$(o) : $(GENERATED_HEADERS)
-$(UUDMAP_H) : $(BITCOUNT_H)
+$(UUDMAP_H) $(MG_DATA_H) : $(BITCOUNT_H)
$(BITCOUNT_H) : $(GENUUDMAP)
- $(GENUUDMAP) $(UUDMAP_H) $(BITCOUNT_H)
+ $(GENUUDMAP) $(GENERATED_HEADERS)
+
+$(GENUUDMAP_OBJ) : ..\mg_raw.h
$(GENUUDMAP) : $(GENUUDMAP_OBJ)
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(GENUUDMAP_OBJ),$@,,$(LIBFILES),)
-.ELIF "$(CCTYPE)" == "GCC"
+.IF "$(CCTYPE)" == "GCC"
$(LINK32) -v -o $@ $(BLINK_FLAGS) \
$(mktmp $(LKPRE) $(GENUUDMAP_OBJ) $(LIBFILES) $(LKPOST))
.ELSE
$(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(PERLEXE_OBJ),$@,, \
- $(PERLIMPLIB) $(LIBFILES),,$(PERLEXE_RES))
-.ELIF "$(CCTYPE)" == "GCC"
+.IF "$(CCTYPE)" == "GCC"
$(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
$(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
.ELSE
- $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
+ $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
$(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
$(EMBED_EXE_MANI)
.ENDIF
$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
$(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(PERLEXEST_OBJ),$@,, \
- $(shell @type Extensions_static) $(PERLSTATICLIB) $(LIBFILES),, \
- $(PERLEXE_RES))
-.ELIF "$(CCTYPE)" == "GCC"
+.IF "$(CCTYPE)" == "GCC"
$(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
$(mktmp $(LKPRE) $(shell @type Extensions_static) \
$(PERLSTATICLIB) $(LIBFILES) $(PERLEXEST_OBJ) \
$(PERLEXE_RES) $(LKPOST))
.ELSE
- $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
+ $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
@Extensions_static $(PERLSTATICLIB) /PDB:NONE \
$(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
$(EMBED_EXE_MANI)
#-------------------------------------------------------------------------------
# There's no direct way to mark a dependency on
# DynaLoader.pm, so this will have to do
-Extensions : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
+Extensions : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
$(XCOPY) ..\*.h $(COREDIR)\*.*
$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
-Extensions_reonly : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
+Extensions_reonly : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
$(XCOPY) ..\*.h $(COREDIR)\*.*
$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
-Extensions_static : ..\make_ext.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM)
+Extensions_static : ..\make_ext.pl ..\lib\buildcustomize.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM)
$(XCOPY) ..\*.h $(COREDIR)\*.*
$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
$(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
-Extensions_nonxs : ..\make_ext.pl $(PERLDEP) $(CONFIGPM)
+Extensions_nonxs : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) ..\pod\perlfunc.pod
$(XCOPY) ..\*.h $(COREDIR)\*.*
$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
-$(DYNALOADER) : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
+$(DYNALOADER) : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
$(XCOPY) ..\*.h $(COREDIR)\*.*
$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
doc: $(PERLEXE) ..\pod\perltoc.pod
$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
--podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
- --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
+ --recurse
# Note that this next section is parsed (and regenerated) by pod/buildtoc
# so please check that script before making structural changes here
cd ..\utils && $(MAKE) PERL=$(MINIPERL)
copy ..\README.aix ..\pod\perlaix.pod
copy ..\README.amiga ..\pod\perlamiga.pod
- copy ..\README.apollo ..\pod\perlapollo.pod
copy ..\README.beos ..\pod\perlbeos.pod
copy ..\README.bs2000 ..\pod\perlbs2000.pod
copy ..\README.ce ..\pod\perlce.pod
copy ..\README.vmesa ..\pod\perlvmesa.pod
copy ..\README.vos ..\pod\perlvos.pod
copy ..\README.win32 ..\pod\perlwin32.pod
- copy ..\pod\perldelta.pod ..\pod\perl5136delta.pod
- cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
+ copy ..\pod\perldelta.pod ..\pod\perl5158delta.pod
$(PERLEXE) $(PL2BAT) $(UTILS)
$(PERLEXE) $(ICWD) ..\autodoc.pl ..
$(PERLEXE) $(ICWD) ..\pod\perlmodlib.pl -q
..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
- $(PERLEXE) -f ..\pod\buildtoc --build-toc -q
+ $(PERLEXE) -f ..\pod\buildtoc -q
# Note that the pod cleanup in this next section is parsed (and regenerated
# by pod/buildtoc so please check that script before making changes here
-del /f $(LIBDIR)\Win32CORE.pm
-del /f $(LIBDIR)\Win32API\File.pm
-del /f $(LIBDIR)\Win32API\File\cFile.pc
+ -del /f $(LIBDIR)\buildcustomize.pl
-del /f $(DISTDIR)\XSLoader\XSLoader.pm
-if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
-if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive
-if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test
-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
-if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
+ -if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash
-if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate
-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
-if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
- -cd $(PODDIR) && del /f *.html *.bat \
- perlaix.pod perlamiga.pod perlapi.pod perlapollo.pod \
+ -cd $(PODDIR) && del /f *.html *.bat roffitall \
+ perl5158delta.pod perlaix.pod perlamiga.pod perlapi.pod \
perlbeos.pod perlbs2000.pod perlce.pod perlcn.pod \
- perlcygwin.pod perl5135delta.pod perldgux.pod perldos.pod \
- perlepoc.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
- perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
- perllinux.pod perlmacos.pod perlmacosx.pod perlmodlib.pod \
- perlmpeix.pod perlnetware.pod perlopenbsd.pod perlos2.pod \
- perlos390.pod perlos400.pod perlplan9.pod perlqnx.pod \
- perlriscos.pod perlsolaris.pod perlsymbian.pod perltoc.pod \
- perltru64.pod perltw.pod perluniprops.pod perluts.pod \
- perlvmesa.pod perlvos.pod perlwin32.pod \
- pod2html
+ perlcygwin.pod perldgux.pod perldos.pod perlepoc.pod \
+ perlfreebsd.pod perlhaiku.pod perlhpux.pod perlhurd.pod \
+ perlintern.pod perlirix.pod perljp.pod perlko.pod perllinux.pod \
+ perlmacos.pod perlmacosx.pod perlmodlib.pod perlmpeix.pod \
+ perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
+ perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
+ perlsolaris.pod perlsymbian.pod perltoc.pod perltru64.pod \
+ perltw.pod perluniprops.pod perluts.pod perlvmesa.pod \
+ perlvos.pod perlwin32.pod
-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
- perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
- xsubpp instmodsh prove ptar ptardiff cpanp-run-perl cpanp cpan2dist shasum corelist config_data
+ perldoc perlivp libnetcfg enc2xs piconv cpan *.bat \
+ xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep cpanp-run-perl cpanp cpan2dist shasum corelist config_data zipdetails
-cd ..\x2p && del /f find2perl s2p psed *.bat
-del /f ..\config.sh perlmain.c dlutils.c config.h.new \
perlmainst.c
-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
-if exist $(COREDIR) rmdir /s /q $(COREDIR)
-if exist pod2htmd.tmp del pod2htmd.tmp
- -if exist pod2htmi.tmp del pod2htmi.tmp
-if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
-del /f ..\t\test_state
install : all installbare installhtml
-installbare : $(RIGHTMAKE) utils ..\pod\perltoc.pod
+installbare : utils ..\pod\perltoc.pod
$(PERLEXE) ..\installperl
if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
$(XCOPY) $(MINIPERL) ..\t\$(NULL)
if exist ..\t\perl.exe del /f ..\t\perl.exe
rename ..\t\miniperl.exe perl.exe
-.IF "$(CCTYPE)" == "BORLAND"
- $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
-.ELSE
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-.ENDIF
attrib -r ..\t\*.*
cd ..\t && \
$(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
-test-prep : all utils
+test-prep : all utils ..\pod\perltoc.pod
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
$(XCOPY) $(PERLDLL) ..\t\$(NULL)
-.IF "$(CCTYPE)" == "BORLAND"
- $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
-.ELSE
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-.ENDIF
+
.IF "$(CCTYPE)" == "GCC"
-.IF "$(GCC_4XX)" == "define"
- $(XCOPY) $(GCCHELPERDLL) ..\t\$(NULL)
-.ENDIF
+# If building with gcc versions 4.x.x or greater, then
+# the GCC helper DLL will also need copied to the test directory.
+# The name of the dll can change, depending upon which vendor has supplied
+# your compiler, and upon the values of "x".
+# libstdc++-6.dll is copied if it exists as it, too, may then be needed.
+# Without this copying, the op/taint.t test script will fail.
+ if exist $(CCHOME)\bin\libgcc_s_sjlj-1.dll $(XCOPY) $(CCHOME)\bin\libgcc_s_sjlj-1.dll ..\t\$(NULL)
+ if exist $(CCHOME)\bin\libgcc_s_dw2-1.dll $(XCOPY) $(CCHOME)\bin\libgcc_s_dw2-1.dll ..\t\$(NULL)
+ if exist $(CCHOME)\bin\libgcc_s_1.dll $(XCOPY) $(CCHOME)\bin\libgcc_s_1.dll ..\t\$(NULL)
+ if exist $(CCHOME)\bin\w64gcc_s_sjlj-1.dll $(XCOPY) $(CCHOME)\bin\w64gcc_s_sjlj-1.dll ..\t\$(NULL)
+ if exist $(CCHOME)\bin\libstdc++-6.dll $(XCOPY) $(CCHOME)\bin\libstdc++-6.dll ..\t\$(NULL)
.ENDIF
-test : $(RIGHTMAKE) test-prep
- cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
+test : test-prep
+ set PERL_STATIC_EXT=$(STATIC_EXT) && \
+ cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
+
+test_porting : test-prep
+ set PERL_STATIC_EXT=$(STATIC_EXT) && \
+ cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) porting\*.t ..\lib\diagnostics.t
test-reonly : reonly utils
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
cd .. && regen.pl && cd win32
test-notty : test-prep
- set PERL_SKIP_TTY_TEST=1 && \
+ set PERL_STATIC_EXT=$(STATIC_EXT) && \
+ set PERL_SKIP_TTY_TEST=1 && \
cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
-_test : $(RIGHTMAKE)
+_test :
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
$(XCOPY) $(PERLDLL) ..\t\$(NULL)
-.IF "$(CCTYPE)" == "BORLAND"
- $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
-.ELSE
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-.ENDIF
- cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
+ set PERL_STATIC_EXT=$(STATIC_EXT) && \
+ cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
_clean :
-@erase miniperlmain$(o)
-@erase $(PERLSTATICLIB)
-@erase $(PERLDLL)
-@erase $(CORE_OBJ)
- -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H) $(BITCOUNT_H)
+ -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(GENERATED_HEADERS)
-if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
-if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
-if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)