$ use_vmsdebug_perl = "n"
$ use64bitall = "n"
$ use64bitint = "n"
-$ uselargefiles = "n"
+$ uselongdouble = "n"
+$ uselargefiles = "y"
+$ usestdstat = "n"
$ usesitecustomize = "n"
$ C_Compiler_Replace = "CC="
-$ Thread_Live_Dangerously = "MT="
+$ thread_upcalls = "MTU="
+$ thread_kernel = "MTK="
$ use_two_pot_malloc = "N"
$ use_pack_malloc = "N"
$ use_debugmalloc = "N"
$! 17-DEC-1999 Improved to turn "[.foo.bar]baz.c_buz" into
$! "[.foo.bar]baz_c.buz" to cover unzipped archives and put
$! "[.foo.bar]baz.c_buz,baz_c.buz" into missing list if neither is found.
-$ basename[f$locate(".",basename),1] := _
-$ dot_ele = F$ELEMENT(dots - 1,"_",basename)
+$ dotloc = f$locate(".",basename)
+$ basename[dotloc,1] := "_"
+$ dot_ele = F$ELEMENT(dots - 1,"_",f$extract(dotloc,f$length(basename),basename))
$ basename = -
f$extract(0,f$length(basename)-(f$length(dot_ele)+1),basename) -
+ "." + dot_ele
$ ENDIF !(needman .EQS. "true")
$!
$!: see if sh knows # comments !sfn
-$ sharpbang = "$ "
$!: figure out how to guarantee sh startup !sfn
$!: find out where common programs are !sfn
$!loclist="awk/cat/comm/cp/echo/expr/find/grep/ln/ls/mkdir/rm/sed/sort/touch/tr/uniq"
$!: Try to determine whether config.sh was made on this system
$!: Get old answers from old config file if Configure was run on the
$!: same system, otherwise use the hints.
-$ config_sh_es = "''config_sh'/[-]config.sh/[-.vms]config.vms/"
+$ config_sh_es = "''config_sh'/[-]config.sh/"
$ i = 0
$ max = 3
$Config_sh_look:
$ IF (configshfound.NES."") THEN GOTO Config_sh_found
$ ENDIF
$ IF (i.LT.max) THEN GOTO Config_sh_look
-$! genconfig.pl has "osname='VMS'"
$ osname = F$EDIT(F$GETSYI("NODE_SWTYPE"),"COLLAPSE")
$ IF (configshfound.EQS."")
$ THEN
$ config_symbols0 ="|archlib|archlibexp|bin|binexp|builddir|cf_email|config_sh|installarchlib|installbin|installman1dir|installman3dir|"
$ config_symbols1 ="|installprivlib|installscript|installsitearch|installsitelib|most|oldarchlib|oldarchlibexp|osname|pager|perl_symbol|perl_verb|"
$ config_symbols2 ="|prefix|privlib|privlibexp|scriptdir|sitearch|sitearchexp|sitebin|sitelib|sitelib_stem|sitelibexp|try_cxx|use64bitall|use64bitint|"
-$ config_symbols3 ="|usecasesensitive|usedefaulttypes|usedevel|useieee|useithreads|usemultiplicity|usemymalloc|usedebugging_perl|useperlio|usesecurelog|"
-$ config_symbols4 ="|usethreads|usevmsdebug|usefaststdio|usemallocwrap|unlink_all_versions|uselargefiles|usesitecustomize|"
-$ config_symbols5 ="|buildmake|builder|"
+$ config_symbols3 ="|usecasesensitive|usedefaulttypes|usedevel|useieee|useithreads|uselongdouble|usemultiplicity|usemymalloc|usedebugging_perl|"
+$ config_symbols4 ="|useperlio|usesecurelog|usethreads|usevmsdebug|usefaststdio|usemallocwrap|unlink_all_versions|uselargefiles|usesitecustomize|"
+$ config_symbols5 ="|buildmake|builder|usethreadupcalls|usekernelthread"
$!
$ open/read CONFIG 'config_sh'
$ rd_conf_loop:
$ cf_time = "''wkday' ''mon' ''mday' ''hour':''min':''sec' ''tz' ''year'"
$!
$!: determine the architecture name
-$! genconfig.pl has either archname='VMS_AXP' or 'VMS_VAX'
$! Note that DCL in VMS V5.4 does not have F$GETSYI("ARCH_NAME")
$! but does have F$GETSYI("HW_MODEL").
$! Please try to use either archname .EQS. "VMS_VAX" or archname .EQS.
$! Add _ROOT to make install PERL_ROOT differ from build directory.
$ prefix = prefixbase + "_ROOT.]"
$ ENDIF
+$ ! more redundant scrubbing of values
+$ prefix = prefix - "000000."
+$ IF F$LOCATE(".]",prefix) .EQ. F$LENGTH(prefix) THEN prefix = prefix - "]" + ".]"
$ src = prefix
$!: determine root of directory hierarchy where package will be installed.
$ dflt = prefix
$ perl_patchlevel = perl_patchlevel - "DEVEL"
$ got_perl_patchlevel = "true"
$ ENDIF
+$ IF ((F$LOCATE("""SMOKE",line).NE.F$LENGTH(line)).AND.(.NOT.got_perl_patchlevel))
+$ THEN
+$ line = F$EDIT(line,"COMPRESS, TRIM")
+$ perl_patchlevel = F$ELEMENT(1,"""",line)
+$ perl_patchlevel = perl_patchlevel - "SMOKE"
+$ got_perl_patchlevel = "true"
+$ ENDIF
+$ IF ((F$LOCATE("""MAINT",line).NE.F$LENGTH(line)).AND.(.NOT.got_perl_patchlevel))
+$ THEN
+$ line = F$EDIT(line,"COMPRESS, TRIM")
+$ perl_patchlevel = F$ELEMENT(1,"""",line)
+$ perl_patchlevel = perl_patchlevel - "MAINT"
+$ got_perl_patchlevel = "true"
+$ ENDIF
$ IF (.NOT. got_patch) .OR. -
(.NOT. got_sub) .OR. -
(.NOT. got_api_revision) .OR. -
$ echo "You are using CXX ''line'"
$ cxxversion = line
$ ccversion = line
+$ d_cplusplus = "define"
$ CALL Cxx_demangler_cleanup
+$ ELSE
+$ d_cplusplus = "undef"
$ ENDIF
$!
$Cxx_demangler_cleanup: SUBROUTINE
$!: What should the include directory be ? (.TLB text libraries)
$ dflt = gcclib_olb
$ rp = "Where are the include files you want to use? "
-$ IF f$length( rp + "[''dflt'] " ).gt.76
+$ IF f$length( rp + "[''dflt'] " ) .GT. 76
$ THEN rp = F$FAO("!AS!/!AS",rp,"[''dflt'] ")
$ ELSE rp = rp + "[''dflt'] "
$ ENDIF
$ echo ""
$ echo "Since you have chosen a maximally 64-bit build, I'm also turning on"
$ echo "the use of 64-bit integers."
-$ echo "I am also setting the default to use large files if available."
$ use64bitint="Y"
$ ENDIF
$!
$ GOSUB myread
$ uselargefiles=ans
$!
+$ bool_dflt = "n"
+$ IF F$TYPE(uselongdouble) .NES. ""
+$ THEN
+$ IF uselongdouble .OR. uselongdouble .eqs. "define" THEN bool_dflt = "y"
+$ ENDIF
+$ echo ""
+$ echo "Perl can be built to take advantage of long doubles which"
+$ echo "(if available) may give more accuracy and range for floating point numbers."
+$ echo ""
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Try to use long doubles, if available? [''bool_dflt'] "
+$ GOSUB myread
+$ uselongdouble = ans
+$!
$ ENDIF ! not VAX && >= 7.1
$!
$ IF usesitecustomize .OR. usesitecustomize .eqs. "define"
$ ELSE
$ use_5005_threads="Y"
$ ENDIF
-$ ! Are they on VMS 7.1 on an alpha or itanium?
-$ if (archname.nes."VMS_VAX").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1")
+$ ! Are they on VMS 7.1 or greater?
+$ IF "''f$extract(1,3, f$getsyi(""version""))'" .GES. "7.1"
$ THEN
$ echo ""
-$ echo "Threaded perl can be linked to use multiple kernel threads"
-$ echo "and system upcalls on VMS 7.1+ on Alpha systems. This feature"
-$ echo "allows multiple threads to execute simultaneously on an SMP"
-$ echo "system as well as preventing a single thread from blocking"
-$ echo "all the threads in a program, even on a single-processor"
-$ echo "machine. Unfortunately, this feature isn't safe on an"
-$ echo "unpatched 7.1 system (several OS patches were required when"
-$ echo "this procedure was written)."
-$ bool_dflt = "n"
-$ rp = "Enable multiple kernel threads and upcalls? [''bool_dflt'] "
+$ echo "Threaded Perl can be linked to use system upcalls on your system. This feature"
+$ echo "allows the thread scheduler to be made aware of system events (such as I/O)"
+$ echo "so as to prevent a single thread from blocking all the threads in a program,"
+$ echo "even on a single-processor machine."
+$ bool_dflt = "y"
+$ IF f$type(usethreadupcalls) .NES. ""
+$ THEN
+$ if .not. usethreadupcalls .or. usethreadupcalls .eqs. "undef" then bool_dflt="n"
+$ ENDIF
+$ rp = "Enable thread upcalls? [''bool_dflt'] "
$ gosub myread
-$ if ans
+$ IF ans
$ THEN
-$ Thread_Live_Dangerously = "MT=MT=1"
+$ thread_upcalls = "MTU=MTU=1"
+$ usethreadupcalls = "define"
+$ ! Are they on alpha or itanium?
+$ IF (archname .NES. "VMS_VAX") .AND. ("''f$extract(1,3, f$getsyi(""version""))'" .GES. "7.2")
+$ THEN
+$ echo ""
+$ echo "Threaded Perl can be linked to use multiple kernel threads on your system."
+$ echo "This feature allows multiple user threads to make use of multiple CPUs on"
+$ echo "a multi-processor machine."
+$ bool_dflt = "n"
+$ IF f$type(usekernelthreads) .nes. ""
+$ THEN
+$ if usekernelthreads .or. usekernelthreads .eqs. "define" then bool_dflt="y"
+$ ENDIF
+$ rp = "Enable multiple kernel threads? [''bool_dflt'] "
+$ gosub myread
+$ IF ans
+$ THEN
+$ thread_kernel = "MTK=MTK=1"
+$ usekernelthreads = "define"
+$ ENDIF
+$ ENDIF
$ ENDIF
$ ENDIF
$ ENDIF
$ ENDIF
+$ IF F$TYPE(usethreadupcalls) .EQS. "" THEN usethreadupcalls = "undef"
+$ IF F$TYPE(usekernelthreads) .EQS. "" THEN usekernelthreads = "undef"
$ IF archname .NES. "VMS_VAX"
$ THEN
$! Case sensitive?
$ be_case_sensitive = ans
$! IEEE math?
$ echo ""
-$ echo "Perl normally uses IEEE format (T_FLOAT) floating point numbers"
-$ echo "internally on Alpha, but if you need G_FLOAT for binary compatibility"
+$ echo "Perl normally uses IEEE format (T_FLOAT) floating point numbers on"
+$ echo "Alpha and Itanium, but if you need G_FLOAT for binary compatibility"
$ echo "with an external library or existing data, you may wish to disable"
$ echo "the IEEE math option."
$ bool_dflt = use_ieee_math
$ ELSE
$ d_unlink_all_versions = "undef"
$ ENDIF
+$!
$! CC Flags
$ echo ""
$ echo "Your compiler may want other flags. For this question you should include"
$ THEN
$ dflt = dflt - "Socket" ! optional on VMS
$ ENDIF
-$ IF .NOT. use_threads THEN dflt = dflt - "Thread"
+$ ! Build this one only for threads without ithreads
+$ IF F$TYPE(useithreads) .EQS. "" .OR. .NOT. use_threads
+$ THEN
+$ dflt = dflt - "Thread"
+$ ELSE
+$ IF useithreads .OR. useithreads .EQS. "define" THEN dflt = dflt - "Thread"
+$ ENDIF
+$ dflt = dflt - "Win32API/File" - "Win32CORE" - "Win32" ! need Dave Cutler's other project
$ dflt = F$EDIT(dflt,"TRIM,COMPRESS")
$!
$! Ask for their default list of extensions to build
$ GOSUB myread
$ pager = ans
$!
-$! update [.vms]config.vms here
-$!
$! update makefile here
$! echo4 "Updating makefile..."
$!
$ IF use_ieee_math
$ THEN
$ extra_flags = "''extra_flags'" + "/float=ieee/ieee=denorm"
+$ ELSE
+$ IF (archname.EQS."VMS_IA64")
+$ THEN
+$ extra_flags = "''extra_flags'" + "/float=g_float"
+$ ENDIF
$ ENDIF
$ IF be_case_sensitive
$ THEN
$ ccdlflags=""
$ cccdlflags=""
$!
+$! FIXME -- This section does not really handle all the different permutations
+$! of 64-bitness, and it does not provide for the /POINTER_SIZE=64 compiler
+$! option that would be necessary to support the "explicit 64-bit interfaces"
+$! promised by -Dusemorebits.
+$!
+$ usemorebits = "undef"
$ IF use64bitint .OR. use64bitint .EQS. "define"
$ THEN
$ use64bitint = "define"
-$ uselongdouble = "define"
-$ alignbytes="16"
-$ usemorebits = "define"
$ ivdformat="""Ld"""
$ uvuformat="""Lu"""
$ uvoformat="""Lo"""
$ uvXUformat="""LX"""
$ ELSE
$ use64bitint = "undef"
-$ uselongdouble = "undef"
-$ usemorebits = "undef"
$ ivdformat="""ld"""
$ uvuformat="""lu"""
$ uvoformat="""lo"""
$ ENDIF
$ IF uselongdouble .OR. uselongdouble .EQS. "define"
$ THEN
+$ uselongdouble = "define"
+$ alignbytes="16"
$ nveformat="""Le"""
$ nvfformat="""Lf"""
$ nvgformat="""Lg"""
$ ELSE
+$ uselongdouble = "undef"
$ nveformat="""e"""
$ nvfformat="""f"""
$ nvgformat="""g"""
$!
$ perllibs=libs
$!
-$! Are we 64 bit?
$!
-$ IF use64bitint .OR. use64bitint .EQS. "define"
+$ IF archname .NES. "VMS_VAX"
$ THEN
$ d_PRId64 = "define"
$ d_PRIu64 = "define"
$ d_quad = "define"
$ quadtype = "long long"
$ uquadtype = "unsigned long long"
-$ quadkind = "QUAD_IS_LONG_LONG"
+$ quadkind = "3"
+$!
$ d_frexpl = "define"
-$ d_isnan = "define"
-$ d_isnanl = "define"
$ d_modfl = "define"
$ d_modflproto = "define"
$ ELSE
$ sPRIu64 = ""
$ sPRIx64 = ""
$ d_quad = "undef"
-$ quadtype = "long"
-$ uquadtype = "unsigned long"
-$ quadkind = "QUAD_IS_LONG"
+$ quadtype = "undef"
+$ uquadtype = "undef"
+$ quadkind = "undef"
+$!
$ d_frexpl = "undef"
-$ d_isnan = "undef"
-$ d_isnanl = "undef"
$ d_modfl = "undef"
$ d_modflproto = "undef"
$ ENDIF
$!
+$ IF useieee .OR. useieee .EQS. "define"
+$ THEN
+$ d_isnan = "define"
+$ d_isnanl = "define"
+$ ELSE
+$ d_isnan = "undef"
+$ d_isnanl = "undef"
+$ ENDIF
+$!
$! Now some that we build up
$!
$ IF use_threads
$ GOSUB inhdr
$ i_unistd = tmp
$!
+$! Check to see if we've got utime.h (which we should use if we have)
+$!
+$ i_netdb = "undef"
+$ tmp = "utime.h"
+$ GOSUB inhdr
+$ i_utime = tmp
+$!
$! do we have getppid()?
$!
$ IF i_unistd .EQS. "define"
$ GOSUB inhdr
$ i_sysmode = tmp
$!
+$! Check for poll.h
+$!
+$ tmp = "sys/poll.h"
+$ gosub inhdr
+$ i_syspoll = tmp
+$!
$! Check for sys/access.h
$!
$ tmp = "sys/access.h"
$ WS "#if defined(F_SETLK) && defined(F_SETLKW)"
$ WS " struct flock flock;"
$ WS " int retval, fd;"
-$ WS " fd = open(""try.c"", O_RDONLY);"
+$ WS " fd = open(""[-]perl.c"", O_RDONLY);"
$ WS " flock.l_type = F_RDLCK;"
$ WS " flock.l_whence = SEEK_SET;"
$ WS " flock.l_start = flock.l_len = 0;"
$ THEN
$ IF (vms_ver .GES. "8.2") .AND. (archname .NES. "VMS_VAX")
$ THEN
+$ echo4 "Largefile support enabled, so enabling standard stat support too."
+$ usestdstat = "y"
$ echo4 -
"Looking for the realpath() function to indicate symbolic link support..."
$ OS
$ d_wait4="define"
$ d_index="define"
$ pidtype="pid_t"
-$ sig_name1="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM "
-$ sig_name2="TERM ABRT USR1 USR2 SPARE18 SPARE19 CHLD CONT STOP TSTP TTIN TTOU "
-$ sig_name3="DEBUG SPARE27 SPARE28 SPARE29 SPARE30 SPARE31 SPARE32 "
-$ sig_name4="WINCH "
-$ sig_namert="RTMIN RTMAX"
-$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS"","
-$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",""USR1"",""USR2"",""SPARE18"",""SPARE19"",""CHLD"",""CONT"",""STOP"",""TSTP"","
-$ psnwc3="""TTIN"",""TTOU"",""DEBUG"",""SPARE27"",""SPARE28"",""SPARE29"",""SPARE30"",""SPARE31"",""SPARE32"","
-$ psnwc4_v7_3="""WINCH"","
-$ psnwcrt="""RTMIN"",""RTMAX"",0"
-$ sig_num1="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 "
-$ sig_num_v7_3="28 "
-$ sig_numrt="33 64"
-$ sig_num_init1="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,"
-$ sig_num_init_v7_3="28,"
-$ sig_num_initrt="33,64,0"
-$ if (vms_ver .GES. "7.3")
-$ then
-$ sig_name = sig_name1 + sig_name2 + sig_name3 + sig_name4 + sig_namert
-$ sig_name_init = psnwc1 + psnwc2 + psnwc3 + psnwc4_v7_3 + psnwcrt
-$ sig_num = sig_num1 + sig_num_v7_3 + sig_numrt
-$ sig_num_init = sig_num_init1 + sig_num_v7_3 + sig_num_initrt
-$ sig_size="37"
-$ else
-$ sig_name = sig_name1 + sig_name2 + sig_name3 + sig_namert
-$ sig_name_init = psnwc1 + psnwc2 + psnwc3 + psnwcrt
-$ sig_num = sig_num1 + sig_numrt
-$ sig_num_init = sig_num_init1 + sig_num_initrt
-$ sig_size="36"
-$ endif
-$ sig_count="64"
+$ sig_name1="ZERO HUP INT QUIT ILL TRAP ABRT EMT FPE KILL BUS SEGV SYS PIPE"
+$ sig_name2=" ALRM TERM USR1 USR2 NUM18 NUM19 CHLD CONT STOP TSTP TTIN TTOU DEBUG"
+$ IF (vms_ver .GES. "7.3")
+$ THEN
+$ sig_name2 = sig_name2 + " NUM27 WINCH"
+$ ENDIF
+$!* signal.h defines SIGRTMIN as 33 and SIGRTMAX as 64, but there is no
+$!* sigqueue function or other apparent means to do realtime signalling,
+$!* so let's not try to include the realtime range for now.
+$!* sig_name3=" NUM29 NUM30 NUM31 NUM32 RTMIN NUM34 NUM35 NUM36 NUM37 NUM38 NUM39 NUM40 NUM41 NUM42 NUM43"
+$!* sig_name4=" NUM44 NUM45 NUM46 NUM47 NUM48 NUM49 NUM50 NUM51 NUM52 NUM53 NUM54 NUM55 NUM56 NUM57 NUM58"
+$!* sig_name5=" NUM59 NUM60 NUM61 NUMT62 NUM63 RTMAX"
+$ sig_name = sig_name1 + sig_name2
+$ sig_num = ""
+$ sig_num_init = ""
+$ sig_name_init = ""
+$ sig_index = 0
+$!
+$ PARSE_SIG_NAME_LOOP:
+$!
+$ tmp = F$ELEMENT(sig_index, " ", sig_name)
+$ IF F$LENGTH(F$EDIT(tmp,"TRIM")) .eq. 0 THEN GOTO END_SIG_NAME_LOOP
+$ sig_name_init = sig_name_init + """''tmp'"","
+$ sig_num = sig_num + "''sig_index' "
+$ sig_num_init = sig_num_init + "''sig_index',"
+$ sig_index = sig_index + 1
+$ GOTO PARSE_SIG_NAME_LOOP
+$!
+$ END_SIG_NAME_LOOP:
+$!
+$ sig_name_init = sig_name_init + "0"
+$ sig_num_init = sig_num_init + "0"
+$ sig_size = "''sig_index'"
+$ sig_index = sig_index - 1
+$ sig_count = "''sig_index'"
$ uidtype="uid_t"
$ d_pathconf="define"
$ d_fpathconf="define"
$ THEN
$ ivtype = "''i64type'"
$ uvtype = "''u64type'"
-$ nvtype="long double"
$ ELSE
$ i64size="undef"
$ u64size="undef"
$ ENDIF
$!
+$ IF uselongdouble .OR. uselongdouble .EQS. "define"
+$ THEN
+$ nvtype="long double"
+$ ENDIF
+$!
$ tmp = "''ivtype'"
$ GOSUB type_size_check
$ ivsize = tmp
$ echo "(UV will be ""''uvtype'"", ''uvsize' bytes)"
$ echo "(NV will be ""''nvtype'"", ''nvsize' bytes)"
$!
-$ echo4 "Checking whether your NVs can preserve your UVs..."
+$ d_nv_preserves_uv = "undef"
+$ echo4 "Checking how many bits of your UVs your NVs can preserve..."
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ WS "#include <stdlib.h>"
$ WS "#endif"
$ WS "#include <stdio.h>"
$ WS "int main() {"
-$ WS " ''uvtype' k = (''uvtype')~0, l;"
-$ WS " ''nvtype' d;"
-$ WS " l = k;"
-$ WS " d = (''nvtype')l;"
-$ WS " l = (''uvtype')d;"
-$ WS " if (l == k)"
-$ WS " printf(""preserve\n"");"
+$ WS " ''uvtype' u = 0;"
+$ WS " int n = 8 * ''uvsize';"
+$ WS " int i;"
+$ WS " for (i = 0; i < n; i++) {"
+$ WS " u = u << 1 | (''uvtype')1;"
+$ WS " if ((''uvtype')(''nvtype')u != u)"
+$ WS " break;"
+$ WS " }"
+$ WS " printf(""%d\n"", i);"
$ WS " exit(0);"
$ WS "}"
$ CS
$ GOSUB compile
-$ IF tmp .EQS. "preserve"
-$ THEN
+$ nv_preserves_uv_bits = tmp
+$ IF F$INTEGER(nv_preserves_uv_bits) .GE. (F$INTEGER(uvsize) * 8)
+$ THEN
$ d_nv_preserves_uv = "define"
-$ echo "Yes, they can."
-$ nv_preserves_uv_bits = F$STRING(F$INTEGER(uvsize) * 8)
+$ echo "Your NVs can preserve all ''nv_preserves_uv_bits' bits of your UVs."
$ ELSE
-$ d_nv_preserves_uv = "undef"
-$ echo "No, they can't."
-$ echo4 "Checking how many bits of your UVs your NVs can preserve..."
-$ OS
-$ WS "#if defined(__DECC) || defined(__DECCXX)"
-$ WS "#include <stdlib.h>"
-$ WS "#endif"
-$ WS "#include <stdio.h>"
-$ WS "int main() {"
-$ WS " ''uvtype' u = 0;"
-$ WS " int n = 8 * ''uvsize';"
-$ WS " int i;"
-$ WS " for (i = 0; i < n; i++) {"
-$ WS " u = u << 1 | (''uvtype')1;"
-$ WS " if ((''uvtype')(''nvtype')u != u)"
-$ WS " break;"
-$ WS " }"
-$ WS " printf(""%d\n"", i);"
-$ WS " exit(0);"
-$ WS "}"
-$ CS
-$ GOSUB compile
-$ nv_preserves_uv_bits = tmp
+$ d_nv_preserves_uv = "undef""
+$ echo "Your NVs can preserve only ''nv_preserves_uv_bits' bits of your UVs."
+$ ENDIF
+$!
+$ nv_overflows_integers_at = "0"
+$ echo4 "Checking to find the largest integer value your NVs can hold..."
+$ OS
+$ WS "#include <stdio.h>"
+$ WS ""
+$ WS "typedef ''nvtype' NV;"
+$ WS ""
+$ WS "int"
+$ WS "main() {"
+$ WS " NV value = 2;"
+$ WS " int count = 1;"
+$ WS ""
+$ WS " while(count < 256) {"
+$ WS " volatile NV up = value + 1.0;"
+$ WS " volatile NV negated = -value;"
+$ WS " volatile NV down = negated - 1.0;"
+$ WS " volatile NV got_up = up - value;"
+$ WS " int up_good = got_up == 1.0;"
+$ WS " int got_down = down - negated;"
+$ WS " int down_good = got_down == -1.0;"
+$ WS ""
+$ WS " if (down_good != up_good) {"
+$ WS " fprintf(stderr,"
+$ WS " ""Inconsistency - up %d %f; down %d %f; for 2**%d (%.20f)\n"","
+$ WS " up_good, (double) got_up, down_good, (double) got_down,"
+$ WS " count, (double) value);"
+$ WS " return 1;"
+$ WS " }"
+$ WS " if (!up_good) {"
+$ WS " while (1) {"
+$ WS " if (count > 8) {"
+$ WS " count -= 8;"
+$ WS " fputs(""256.0"", stdout);"
+$ WS " } else {"
+$ WS " count--;"
+$ WS " fputs(""2.0"", stdout);"
+$ WS " }"
+$ WS " if (!count) {"
+$ WS " puts("""");"
+$ WS " return 0;"
+$ WS " }"
+$ WS " fputs(""*"", stdout);"
+$ WS " }"
+$ WS " }"
+$ WS " value *= 2;"
+$ WS " ++count;"
+$ WS " }"
+$ WS " fprintf(stderr, ""Cannot overflow integer range, even at 2**%d (%.20f)\n"","
+$ WS " count, (double) value);"
+$ WS " return 1;"
+$ WS "}"
+$ CS
+$ GOSUB compile
+$ IF F$LENGTH(tmp) .GT. 0
+$ THEN
+$ IF F$EXTRACT(0,1,tmp) .EQS. "2"
+$ THEN
+$ echo "The largest integer your NVs can preserve is equal to ''tmp'"
+$ nv_overflows_integers_at = tmp
+$ ELSE
+$ echo "Cannot determine the largest integer value your NVs can hold, unexpected output"
+$ echo "''tmp'"
+$ ENDIF
+$ ELSE
+$ echo "Cannot determine the largest integer value your NVs can hold"
+$ ENDIF
+$!
+$! Check for signbit (must already know nvtype)
+$!
+$ echo4 "Checking to see if you have signbit() available to work on ''nvtype'..."
+$ OS
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <fp.h>"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS " ''nvtype' x = 0.0;"
+$ WS " ''nvtype' y = -0.0;"
+$ WS " if ((signbit(x) == 0) && (signbit(y) != 0))"
+$ WS " printf(""1\n"");"
+$ WS " else"
+$ WS " printf(""0\n"");"
+$ WS "}"
+$ CS
+$ GOSUB compile
+$ IF tmp .EQS. "1"
+$ THEN
+$ d_signbit = "define"
+$ echo4 "Yes."
+$ ELSE
+$ d_signbit = "undef"
+$ echo4 "Nope."
$ ENDIF
$!
$ echo4 "Checking if kill() uses SYS$FORCEX or can't be called from a signal handler..."
$ echo4 "Yep, we can."
$ kill_by_sigprc = "define"
$!
-$! since SIGBUS and SIGSEGV indistinguishable, make them the same here.
-$! sigusr1 and sigusr2 show up in VMS6.2 and later
+$! Use the same list of signals the CRTL does for recent systems, but cook our own for very old systems.
+$! Note that the list controls what signals can be caught by name as well as what can be raised via kill().
$!
-$ if vms_ver .GES. "6.2"
-$ then
-$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT USR1 USR2"
-$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS"","
-$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",""USR1"",""USR2"",0"
-$ sig_name_init = psnwc1 + psnwc2
-$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 16 17"
-$ sig_num_init="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,16,17,0"
-$ sig_size="19"
-$ sig_count="17"
-$ else
+$ if vms_ver .LTS. "6.2"
+$ then
+$! since SIGBUS and SIGSEGV indistinguishable, make them the same here.
$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT"
$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS"","
$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",0"
$ WC "PERL_API_VERSION='" + api_version + "'"
$ WC "PERL_API_SUBVERSION='" + api_subversion + "'"
$ WC "PERL_PATCHLEVEL='" + perl_patchlevel + "'"
+$ WC "perl_patchlevel='" + perl_patchlevel + "'"
$ WC "PERL_CONFIG_SH='true'"
$ WC "_a='" + lib_ext + "'"
$ WC "_exe='" + exe_ext + "'"
$ WC "ccdlflags='" + ccdlflags + "'"
$ IF uselargefiles .OR. uselargefiles .EQS. "define"
$ THEN
-$! Perl can not use _USE_STD_STAT at the moment
-$! IF d_symlink .OR. d_symlink .EQS. "define"
-$! THEN
-$! ccdefines = "_USE_STD_STAT=1"
-$! ELSE
+$ IF usestdstat .OR. usestdstat .EQS. "define"
+$ THEN
+$ ccdefines = "_USE_STD_STAT=1"
+$ ELSE
$ ccdefines = "_LARGEFILE=1"
-$! ENDIF
+$ ENDIF
$ ELSE
$ ccdefines = ""
$ ENDIF
$ WC "d_attribute_pure='undef'"
$ WC "d_attribute_unused='undef'"
$ WC "d_attribute_warn_unused_result='undef'"
+$ WC "d_printf_format_null='undef'"
$ WC "d_bcmp='" + d_bcmp + "'"
$ WC "d_bcopy='" + d_bcopy + "'"
$ WC "d_bincompat3='undef'"
$! WC "d_bsdpgrp='undef'"
$ WC "d_bsdgetpgrp='undef'"
$ WC "d_bsdsetpgrp='undef'"
-$ WC "d_builtin_choose_expr='undef'"
-$ WC "d_builtin_expect='undef'"
+$ WC "d_builtin_choose_expr='undef'" ! GCC only
+$ WC "d_builtin_expect='undef'" ! GCC only
$ WC "d_bzero='" + d_bzero + "'"
$ WC "d_casti32='define'"
$ WC "d_castneg='define'"
$ WC "d_cmsghdr_s='undef'"
$ WC "d_const='define'"
$ WC "d_copysignl='define'"
+$ WC "d_cplusplus='" + d_cplusplus + "'"
$ WC "d_crypt='define'"
$ WC "d_csh='undef'"
+$ WC "d_ctermid='define'"
$ WC "d_cuserid='define'"
+$ WC "d_c99_variadic_macros='undef'"
$ WC "d_dbl_dig='define'"
$ WC "d_dbminitproto='undef'"
$ WC "d_difftime='define'"
+$ WC "d_dir_dd_fd='undef'"
$ WC "d_dirfd='undef'"
$ WC "d_dirnamlen='define'"
$ WC "d_dlerror='undef'"
$ WC "d_hasmntopt='undef'"
$ WC "d_htonl='" + d_htonl + "'"
$ WC "d_ilogbl='undef'"
+$ WC "d_inc_version_list='undef'"
$ WC "d_index='" + d_index + "'"
$ WC "d_inetaton='undef'"
$ WC "d_int64_t='" + d_int64_t + "'"
$ WC "d_nice='define'"
$ WC "d_nl_langinfo='" + d_nl_langinfo + "'"
$ WC "d_nv_preserves_uv='" + d_nv_preserves_uv + "'"
+$ WC "nv_overflows_integers_at='" + nv_overflows_integers_at + "'"
$ WC "nv_preserves_uv_bits='" + nv_preserves_uv_bits + "'"
$ WC "d_nv_zero_is_allbits_zero='define'"
$ WC "d_off64_t='" + d_off64_t + "'"
$ WC "d_pipe='define'"
$ WC "d_poll='" + d_poll + "'"
$ WC "d_procselfexe='undef'"
+$ WC "d_pseudofork='undef'"
$ WC "d_pthread_atfork='undef'"
$ WC "d_pthread_attr_setscope='" + d_pthread_attr_setscope + "'"
$ WC "d_pthread_yield='" + d_pthread_yield + "'"
$ WC "d_shm='undef'"
$ WC "d_shmatprototype='undef'"
$ WC "d_sigaction='" + d_sigaction + "'"
+$ WC "d_signbit='" + d_signbit + "'"
$ WC "d_sigprocmask='" + d_sigprocmask + "'"
$ WC "d_sigsetjmp='" + d_sigsetjmp + "'"
+$ WC "d_sitearch='define'"
$ WC "d_sockatmark='undef'"
$ WC "d_sockatmarkproto='undef'"
$ WC "d_socket='" + d_socket + "'"
$ WC "dlsrc='dl_vms.c'"
$ WC "doublesize='" + doublesize + "'"
$ WC "drand01='" + drand01 + "'"
+$ WC "dtrace='" + "'"
$!
$! The extensions symbol may be quite long
$!
$ WC "i8size='" + i8size + "'"
$ WC "i8type='" + i8type + "'"
$ WC "i_arpainet='undef'"
+$ WC "i_assert='define'"
$ WC "i_crypt='undef'"
$ WC "i_db='undef'"
$ WC "i_dbm='undef'"
$ WC "i_float='define'"
$ WC "i_fp='undef'"
$ WC "i_fp_class='undef'"
+$ WC "i_gdbm='undef'"
$ WC "i_grp='" + i_grp + "'"
$ WC "i_ieeefp='undef'"
$ WC "i_inttypes='" + i_inttypes + "'"
$ WC "i_locale='" + i_locale + "'"
$ WC "i_machcthr='undef'"
$ WC "i_machcthreads='undef'"
+$ WC "i_mallocmalloc='undef'"
$ WC "i_math='define'"
$ WC "i_memory='undef'"
$ WC "i_mntent='undef'"
$ WC "i_sysmount='undef'"
$ WC "i_sysndir='undef'"
$ WC "i_sysparam='undef'"
+$ WC "i_syspoll='" + i_syspoll + "'"
$ WC "i_sysresrc='undef'"
$ WC "i_syssecrt='" + i_syssecrt + "'"
$ WC "i_sysselct='undef'"
$ WC "i_time='define'"
$ WC "i_unistd='" + i_unistd + "'"
$ WC "i_ustat='undef'"
-$ WC "i_utime='undef'"
+$ WC "i_utime='" + i_utime + "'"
$ WC "i_values='undef'"
$ WC "i_varargs='undef'"
$ WC "i_vfork='undef'"
$ WC "lseektype='int'"
$ ENDIF
$ WC "mab='" + "'"
+$ WC "mad='undef'"
$ WC "make='" + make + "'"
$ WC "malloctype='void *'"
$ WC "usemallocwrap='" + usemallocwrap + "'"
$ WC "selectminbits='32'"
$ WC "selecttype='" + selecttype + "'"
$ WC "sh='MCR'"
+$ WC "sharpbang='#!'"
$ WC "shmattype='" + " '"
$ WC "shortsize='" + shortsize + "'"
-$ WC "shrplib='define'"
-$ WC "sig_name='" + sig_name + "'"
-$ WC "sig_name_init='" + sig_name_init + "'"
+$ IF (f$length(sig_name) .GE. 244)
+$ THEN
+$ tmp = "sig_name='" + sig_name + "'"
+$ WC/symbol tmp
+$ DELETE/SYMBOL tmp
+$ ELSE
+$ WC "sig_name='" + sig_name + "'"
+$ ENDIF
+$ IF (f$length(sig_name_init) .GE. 244)
+$ THEN
+$ tmp = "sig_name_init='" + sig_name_init + "'"
+$ WC/symbol tmp
+$ DELETE/SYMBOL tmp
+$ ELSE
+$ WC "sig_name_init='" + sig_name_init + "'"
+$ ENDIF
$ WC "sig_num='" + sig_num + "'"
$ WC "sig_num_init='" + sig_num_init + "'"
$ WC "sig_count='" + sig_count + "'"
$ WC "stdio_ptr='((*fp)->_ptr)'"
$ WC "stdio_stream_array=' " + "'"
$ WC "subversion='" + subversion + "'"
+$ WC "targetarch='" + "'"
$ WC "timetype='" + timetype + "'"
$ WC "u16size='" + u16size + "'"
$ WC "u16type='" + u16type + "'"
$ WC "usedefaulttypes='" + usedefaulttypes + "'" ! VMS-specific
$ WC "usecrosscompile='undef'"
$ WC "usedl='" + usedl + "'"
+$ WC "usedtrace='undef'"
$ WC "usefaststdio='" + usefaststdio + "'"
$ WC "useieee='" + useieee + "'" ! VMS-specific
$ WC "useithreads='" + useithreads + "'"
+$ WC "usekernelthreads='" + usekernelthreads + "'" ! VMS-specific
$ WC "uselargefiles='" + uselargefiles + "'"
$ WC "uselongdouble='" + uselongdouble + "'"
$ WC "usemorebits='" + usemorebits + "'"
$ WC "usereentrant='undef'"
$ WC "userelocatableinc='undef'"
$ WC "usesecurelog='" + usesecurelog + "'" ! VMS-specific
+$ WC "useshrplib='true'"
$ WC "usesitecustomize='" + usesitecustomize + "'"
$ WC "usesocks='undef'"
$ WC "usethreads='" + usethreads + "'"
+$ WC "usethreadupcalls='" + usethreadupcalls + "'" ! VMS-specific
$ WC "usevendorprefix='" + "'" ! try to say no, though we'll be ignored as of MM 5.90_01
$ WC "usevfork='true'"
$ WC "usevmsdebug='" + usevmsdebug + "'" ! VMS-specific
$ WC "d_getspnam_r='undef'"
$ WC "d_gmtime_r='undef'" ! leave undef'd; we use my_gmtime
$ WC "d_localtime_r='undef'" ! leave undef'd; we use my_localtime
+$ WC "d_localtime_r_needs_tzset='undef'"
$ WC "d_random_r='undef'"
$ WC "d_readdir_r='define'" ! always defined; we roll our own
$ WC "d_readdir64_r='undef'"
$! Okay, we've gotten here. Build munchconfig.exe
$ COPY/NOLOG [-.vms]munchconfig.c []
$ COPY/NOLOG [-.vms]'Makefile_SH' []
-$ 'Perl_CC' munchconfig.c
+$ 'Perl_CC' 'ccflags' munchconfig.c
$ IF Needs_Opt
$ THEN
$ OPEN/WRITE CONFIG []munchconfig.opt
$ IF use64bitall .OR. use64bitall .EQS. "define" THEN -
WC "#define USE_64_BIT_ALL"
$ IF be_case_sensitive THEN WC "#define VMS_WE_ARE_CASE_SENSITIVE"
+$ IF use_ieee_math THEN WC "#define USE_IEEE"
$ IF d_herrno .EQS. "undef" THEN WC "#define NEED_AN_H_ERRNO"
$ WC "#define HAS_ENVGETENV"
$ WC "#define PERL_EXTERNAL_GLOB"
$ ENDIF
$ IF uselargefiles .OR. uselargefiles .EQS. "define"
$ THEN
-$! Perl can not use _USE_STD_STAT at the moment
-$! IF d_symlink .or. d_symlink .eqs. "define"
-$! THEN
-$! LARGEFILE_REPLACE = "LARGEFILE=LARGEFILE=_USE_STD_STAT=1"
-$! ELSE
+$ IF usestdstat .or. usestdstat .eqs. "define"
+$ THEN
+$ LARGEFILE_REPLACE = "LARGEFILE=LARGEFILE=_USE_STD_STAT=1"
+$ ELSE
$ LARGEFILE_REPLACE = "LARGEFILE=LARGEFILE=_LARGEFILE=1"
-$! ENDIF
+$ ENDIF
$ ELSE
$ LARGEFILE_REPLACE = "LARGEFILE="
$ ENDIF
+$!
+$! In order not to stress the tiny command buffer on pre-7.3-2 systems,
+$! we put the following substitutions in a file and pass the file to
+$! munchconfig.
+$!
+$ open/write CONFIG extra_subs.txt
+$ WC := write CONFIG
+$ WC "''DECC_REPLACE'"
+$ WC "''DECCXX_REPLACE'"
+$ WC "''ARCH_TYPE'"
+$ WC "''GNUC_REPLACE'"
+$ WC "''SOCKET_REPLACE'"
+$ WC "''THREAD_REPLACE'"
+$ WC "''C_Compiler_Replace'"
+$ WC "''MALLOC_REPLACE'"
+$ WC "''THREAD_UPCALLS'"
+$ WC "''THREAD_KERNEL'"
+$ WC "PV=''version'"
+$ WC "FLAGS=FLAGS=''extra_flags'"
+$ WC "''LARGEFILE_REPLACE'"
+$ close CONFIG
+$!
$ echo4 "Extracting ''defmakefile' (with variable substitutions)"
$ DEFINE/USER_MODE sys$output 'UUmakefile'
-$ mcr []munchconfig 'config_sh' 'Makefile_SH' "''DECC_REPLACE'" "''DECCXX_REPLACE'" "''ARCH_TYPE'" "''GNUC_REPLACE'" -
-"''SOCKET_REPLACE'" "''THREAD_REPLACE'" "''C_Compiler_Replace'" "''MALLOC_REPLACE'" -
-"''Thread_Live_Dangerously'" "PV=''version'" "FLAGS=FLAGS=''extra_flags'" "''LARGEFILE_REPLACE'"
+$ mcr []munchconfig 'config_sh' 'Makefile_SH' -f extra_subs.txt
$! Clean up after ourselves
$ DELETE/NOLOG/NOCONFIRM []munchconfig.exe;
+$ DELETE/NOLOG/NOCONFIRM []extra_subs.txt;
$!
$ echo4 "Extracting make_ext.com (without variable substitutions)"
$ Create Sys$Disk:[-]make_ext.com
$! NOTE: This file is extracted as part of the VMS configuration process.
$! Any changes made to it directly will be lost. If you need to make any
$! changes, please edit the template in Configure.Com instead.
-$ def = F$Environment("Default")
+$ mydefault = F$Environment("Default")
$! p1 - how to invoke miniperl (passed in from descrip.mms)
$ p1 = F$Edit(p1,"Upcase,Compress,Trim")
$ If F$Locate("MCR ",p1).eq.0 Then p1 = F$Extract(3,255,p1)
miniperl "-I[''up'.lib]" Makefile.PL "INST_LIB=[''up'.lib]" "INST_ARCHLIB=[''up'.lib]" "PERL_CORE=1"
$ makeutil 'targ'
$ i = i + 1
-$ Set Def &def
+$ Set Def &mydefault
$ Goto next_ext
$ done:
$ sts = $Status
-$ Set Def &def
+$ Set Def &mydefault
$ Exit sts
$!-- make_ext.com
$EndOfTpl$
$ pcsi_producer = f$trnlnm("PCSI_PRODUCER")
$ if pcsi_producer .eqs. ""
$ then
-$ prefix = prefix - "000000."
-$ IF F$LOCATE(".]",prefix) .EQ. F$LENGTH(prefix) THEN prefix = prefix - "]" + ".]"
$ WRITE CONFIG "$ define/translation=concealed ''vms_prefix' ''prefix'"
$ else
$ WRITE CONFIG "$ myproc = f$environment(""PROCEDURE"")"
$ WRITE CONFIG "$ define/translation=concealed ''vms_prefix' 'myroot_dev'['myroot_dir'.]"
$ WRITE CONFIG "$ endif"
$ endif
-$
-$ prefix = prefix - "000000."
-$ IF F$LOCATE(".]",prefix) .EQ. F$LENGTH(prefix) THEN prefix = prefix - "]" + ".]"
-$ WRITE CONFIG "$ define/translation=concealed ''vms_prefix' ''prefix'"
-
-
$ WRITE CONFIG "$ ext = "".exe"""
$ IF sharedperl
$ THEN
$ WRITE CONFIG "$ set command ''vms_prefix':[000000]''packageup'.CLD"
$ ENDIF
$ ENDIF ! perl_symbol
-$ WRITE CONFIG "$ define/nolog pod2text ''vms_prefix':[lib.pod]pod2text.com"
-$ WRITE CONFIG "$ define/nolog pod2html ''vms_prefix':[lib.pod]pod2html.com"
-$ WRITE CONFIG "$ define/nolog pod2man ''vms_prefix':[lib.pod]pod2man.com"
$!
$ IF (tzneedset)
$ THEN
$ WRITE CONFIG "$! define SYS$TIMEZONE_DIFFERENTIAL ''tzd'"
$ ENDIF
$ WRITE CONFIG "$!"
-$ WRITE CONFIG "$! Symbols for commonly used programs:"
+$ WRITE CONFIG "$! Symbols for Perl-based utility programs:"
$ WRITE CONFIG "$!"
$ WRITE CONFIG "$ c2ph == """ + perl_setup_perl + " ''vms_prefix':[utils]c2ph.com"""
+$ WRITE CONFIG "$ config_data== """ + perl_setup_perl + " ''vms_prefix':[utils]config_data.com"""
+$ WRITE CONFIG "$ corelist == """ + perl_setup_perl + " ''vms_prefix':[utils]corelist.com"""
$ WRITE CONFIG "$ cpan == """ + perl_setup_perl + " ''vms_prefix':[utils]cpan.com"""
+$ WRITE CONFIG "$ cpan2dist == """ + perl_setup_perl + " ''vms_prefix':[utils]cpan2dist.com"""
+$! FIXME: "-" is an operator and illegal in a symbol name -- cpanp-run-perl can't work
+$!$ WRITE CONFIG "$ cpanp-run-perl == """ + perl_setup_perl + " ''vms_prefix':[utils]cpanp-run-perl.com"""
+$ WRITE CONFIG "$ cpanp == """ + perl_setup_perl + " ''vms_prefix':[utils]cpanp.com"""
$ IF F$LOCATE("Devel::DProf",extensions) .LT. F$LENGTH(extensions)
$ THEN
$ WRITE CONFIG "$ dprofpp == """ + perl_setup_perl + " ''vms_prefix':[utils]dprofpp.com"""
$ WRITE CONFIG "$ h2xs == """ + perl_setup_perl + " ''vms_prefix':[utils]h2xs.com"""
$ WRITE CONFIG "$ instmodsh == """ + perl_setup_perl + " ''vms_prefix':[utils]instmodsh.com"""
$ WRITE CONFIG "$ libnetcfg == """ + perl_setup_perl + " ''vms_prefix':[utils]libnetcfg.com"""
-$ WRITE CONFIG "$ perlbug == """ + perl_setup_perl + " ''vms_prefix':[lib]perlbug.com"""
-$ WRITE CONFIG "$!perlcc == """ + perl_setup_perl + " ''vms_prefix':[utils]perlcc.com"""
-$ WRITE CONFIG "$ perldoc == """ + perl_setup_perl + " ''vms_prefix':[lib.pods]perldoc.com """"-t"""""""
+$ WRITE CONFIG "$ perlbug == """ + perl_setup_perl + " ''vms_prefix':[utils]perlbug.com"""
+$ WRITE CONFIG "$ perldoc == """ + perl_setup_perl + " ''vms_prefix':[utils]perldoc.com """"-t"""""""
$ WRITE CONFIG "$ perlivp == """ + perl_setup_perl + " ''vms_prefix':[utils]perlivp.com"""
$ WRITE CONFIG "$ piconv == """ + perl_setup_perl + " ''vms_prefix':[utils]piconv.com"""
$ WRITE CONFIG "$ pl2pm == """ + perl_setup_perl + " ''vms_prefix':[utils]pl2pm.com"""
-$ WRITE CONFIG "$ pod2html == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2html"""
-$ WRITE CONFIG "$ pod2latex == """ + perl_setup_perl + " ''vms_prefix':[lib.pod]pod2latex.com"""
-$ WRITE CONFIG "$ pod2text == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2text"""
-$ WRITE CONFIG "$!pod2man == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2man"""
+$ WRITE CONFIG "$ pod2html == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2html.com"""
+$ WRITE CONFIG "$ pod2latex == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2latex.com"""
+$ WRITE CONFIG "$ pod2text == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2text.com"""
+$ WRITE CONFIG "$!pod2man == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2man.com"""
$ WRITE CONFIG "$ pod2usage == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2usage.com"""
$ WRITE CONFIG "$ podchecker == """ + perl_setup_perl + " ''vms_prefix':[utils]podchecker.com"""
$ WRITE CONFIG "$ podselect == """ + perl_setup_perl + " ''vms_prefix':[utils]podselect.com"""
$ WRITE CONFIG "$ psed == """ + perl_setup_perl + " ''vms_prefix':[utils]psed.com"""
$ WRITE CONFIG "$ pstruct == """ + perl_setup_perl + " ''vms_prefix':[utils]pstruct.com"""
$ WRITE CONFIG "$ s2p == """ + perl_setup_perl + " ''vms_prefix':[utils]s2p.com"""
+$ WRITE CONFIG "$ ptar == """ + perl_setup_perl + " ''vms_prefix':[utils]ptar.com"""
+$ WRITE CONFIG "$ ptardiff == """ + perl_setup_perl + " ''vms_prefix':[utils]ptardiff.com"""
+$ WRITE CONFIG "$ shasum == """ + perl_setup_perl + " ''vms_prefix':[utils]shasum.com"""
$ WRITE CONFIG "$ splain == """ + perl_setup_perl + " ''vms_prefix':[utils]splain.com"""
$ WRITE CONFIG "$ xsubpp == """ + perl_setup_perl + " ''vms_prefix':[utils]xsubpp.com"""
$ CLOSE CONFIG
https://perl5.git.perl.org / perl5.git / blobdiff