with:
perl Makefile.PL POLLUTE=1
-
+
Alternatively, you can enable CPP symbol pollution wholesale by
building perl itself with:
the sources back to the platform without GCC.
If you succeed in automatically converting the sources to a K&R compatible
-form, be sure to email perlbug@perl.com to let us know the steps you
+form, be sure to email perlbug@perl.org to let us know the steps you
followed. This will enable us to officially support this option.
=back
configuration exists to allow these issues to be worked on.
This option requires the 'sfio' package to have been built and installed.
-A (fairly old) version of sfio is in CPAN.
+The latest sfio is available from http://www.research.att.com/sw/tools/sfio/
You select this option by
_exit vs. exit. If you have this problem, the fix is to go back to
your sfio sources and correct iffe's guess about atexit.
-There also might be a more recent release of Sfio that fixes your
-problem.
-
=item 2.
Normal stdio IO, but with all IO going through calls to the PerlIO
=back
+=head2 SOCKS
+
+Perl can be configured to be 'socksified', that is, to use the SOCKS
+TCP/IP proxy protocol library. SOCKS is used to give applications
+access to transport layer network proxies. Perl supports only SOCKS
+Version 5. You can find more about SOCKS from http://www.socks.nec.com/
+
=head2 Dynamic Loading
By default, Configure will compile perl to use dynamic loading if
it might well be a symptom of the gcc "varargs problem". See the
previous L<"varargs"> item.
-=item Solaris and SunOS dynamic loading
-
-If you have problems with dynamic loading using gcc on SunOS or
-Solaris, and you are using GNU as and GNU ld, you may need to add
--B/bin/ (for SunOS) or -B/usr/ccs/bin/ (for Solaris) to your
-$ccflags, $ldflags, and $lddlflags so that the system's versions of as
-and ld are used. Note that the trailing '/' is required.
-Alternatively, you can use the GCC_EXEC_PREFIX
-environment variable to ensure that Sun's as and ld are used. Consult
-your gcc documentation for further information on the -B option and
-the GCC_EXEC_PREFIX variable.
-
-One convenient way to ensure you are not using GNU as and ld is to
-invoke Configure with
-
- sh Configure -Dcc='gcc -B/usr/ccs/bin/'
-
-for Solaris systems. For a SunOS system, you must use -B/bin/
-instead.
-
-Alternatively, recent versions of GNU ld reportedly work if you
-include C<-Wl,-export-dynamic> in the ccdlflags variable in
-config.sh.
-
-=item ld.so.1: ./perl: fatal: relocation error:
-
-If you get this message on SunOS or Solaris, and you're using gcc,
-it's probably the GNU as or GNU ld problem in the previous item
-L<"Solaris and SunOS dynamic loading">.
-
=item LD_LIBRARY_PATH
If you run into dynamic loading problems, check your setting of
fine with LD_LIBRARY_PATH unset, though that may depend on details
of your local set-up.
-=item dlopen: stub interception failed
-
-The primary cause of the 'dlopen: stub interception failed' message is
-that the LD_LIBRARY_PATH environment variable includes a directory
-which is a symlink to /usr/lib (such as /lib).
-
-The reason this causes a problem is quite subtle. The file libdl.so.1.0
-actually *only* contains functions which generate 'stub interception
-failed' errors! The runtime linker intercepts links to
-"/usr/lib/libdl.so.1.0" and links in internal implementation of those
-functions instead. [Thanks to Tim Bunce for this explanation.]
-
=item nm extraction
If Configure seems to be having trouble finding library functions,
that any site is carrying a corrupted or incomplete source code
archive, please report it to the site's maintainer.
-This message can also be a symptom of using (say) a GNU tar compiled
-for SunOS4 on Solaris. When you run SunOS4 binaries on Solaris the
-run-time system magically alters pathnames matching m#lib/locale# - so
-when tar tries to create lib/locale.pm a differently-named file gets
-created instead.
-
-You may find the file under its assumed name and be able to rename it
-back. Or use Sun's tar to do the extract.
-
=item invalid token: ##
You are using a non-ANSI-compliant C compiler. See L<WARNING: This
version requires a compiler that supports ANSI C>.
-=item lib/locale.pm: No such file or directory
-
-See L<THIS PACKAGE SEEMS TO BE INCOMPLETE>.
-
=item Miscellaneous
Some additional things that have been reported for either perl4 or perl5:
tries to exercise the regular expression subsystem quite thoroughly,
and may well be far more demanding than your normal usage.
+=item Test failures from lib/ftmp-security saying "system possibly insecure"
+
+Firstly, test failures from the ftmp-security are not necessarily
+serious or indicative of a real security threat. That being said,
+they bear investigating.
+
+The tests may fail for the following reasons. Note that each of the
+tests is run both in the building directory and the temporary
+directory, as returned by File::Spec->tmpdir().
+
+(1) If the directory the tests are being run is owned by somebody else
+than the user running the tests, or root (uid 0). This failure can
+happen if the Perl source code distribution is unpacked in a way that
+the user ids in the distribution package are used as-is. Some tar
+programs do this.
+
+(2) If the directory the test are being run in is writable by group
+or by other (remember: with UNIX/POSIX semantics, write access to
+a directory means the right to add/remove files in that directory),
+and there is no sticky bit set in the directory. 'Sticky bit' is
+a feature used in some UNIXes to give extra protection to files: if
+the bit is on a directory, no one but the owner (or the root) can remove
+that file even if the permissions of the directory would allow file
+removal by others. This failure can happen if the permissions in the
+directory simply are a bit too liberal for the tests' liking. This
+may or may not be a real problem: it depends on the permissions policy
+used on this particular directory/project/system/site. This failure
+can also happen if the system either doesn't support the sticky bit
+(this is the case with many non-UNIX platforms: in principle the
+File::Temp should know about these platforms and skip the tests), or
+if the system supports the sticky bit but for some reason or reasons
+it is not being used. This is for example the case with HP-UX: as of
+HP-UX release 11.00, the sticky bit is very much supported, but HP-UX
+doesn't use it on its /tmp directory as shipped. Also as with the
+permissions, some local policy might dictate that the stickiness is
+not used.
+
+(3) If the system supports the POSIX 'chown giveaway' feature and if
+any of the parent directories of the temporary file back to the root
+directory are 'unsafe', using the definitions given above in (1) and
+(2).
+
+See the documentation for the File::Temp module for more information
+about the various security aspects.
+
=back
=head1 make install
make install will install the following:
+ binaries
+
perl,
perl5.nnn where nnn is the current release number. This
will be a link to perl.
suidperl,
sperl5.nnn If you requested setuid emulation.
a2p awk-to-perl translator
+
+ scripts
+
cppstdin This is used by perl -P, if your cc -E can't
read from stdin.
c2ph, pstruct Scripts for handling C structures in header files.
pl2pm Convert Perl 4 .pl files to Perl 5 .pm modules
pod2html, Converters from perl's pod documentation format
pod2latex, to other useful formats.
- pod2man, and
- pod2text
+ pod2man,
+ pod2text,
+ pod2checker,
+ pod2select,
+ pod2usage
splain Describe Perl warnings and errors
dprofpp Perl code profile post-processor
- library files in $privlib and $archlib specified to
+ library files
+
+ in $privlib and $archlib specified to
Configure, usually under /usr/local/lib/perl5/.
+
+ documentation
+
man pages in $man1dir, usually /usr/local/man/man1.
module man
pages in $man3dir, usually /usr/local/man/man3.
Installperl will also create the directories listed above
in L<"Installation Directories">.
-Perl's *.h header files and the libperl.a library are also installed
+Perl's *.h header files and the libperl library are also installed
under $archlib so that any user may later build new modules, run the
optional Perl compiler, or embed the perl interpreter into another
program even if the Perl source is no longer available.
+Sometimes you only want to install the version-specific parts of the perl
+installation. For example, you may wish to install a newer version of
+perl alongside an already installed production version of perl without
+disabling installation of new modules for the production version.
+To only install the version-specific parts of the perl installation, run
+
+ Configure -Dversiononly
+
+or answer 'y' to the appropriate Configure prompt. Alternatively,
+you can just manually run
+
+ ./perl installperl -v
+
+and skip installman altogether.
+See also L<"Maintaining completely separate versions"> for another
+approach.
+
=head1 Coexistence with earlier versions of perl5
In general, you can usually safely upgrade from one version of Perl (e.g.
If you have difficulty building perl, and none of the advice in this file
helps, and careful reading of the error message and the relevant manual
pages on your system doesn't help either, then you should send a message
-to either the comp.lang.perl.misc newsgroup or to perlbug@perl.com with
+to either the comp.lang.perl.misc newsgroup or to perlbug@perl.org with
an accurate description of your problem.
Please include the output of the ./myconfig shell script that comes with
https://perl5.git.perl.org / perl5.git / blobdiff