=item * 8 - Adds parameter information to messages, and overloaded stringify and tied FETCH is enabled on the printed arguments. Ignored if C<4> is not on.
-=item * 16 - Adds C<I<context> return from I<subname>: I<value>> messages on subroutine/eval exit. Ignored if C<4> is is not on.
+=item * 16 - Adds C<I<context> return from I<subname>: I<value>> messages on subroutine/eval exit. Ignored if C<4> is not on.
=back
# Debugger for Perl 5.00x; perl5db.pl patch level:
use vars qw($VERSION $header);
-$VERSION = '1.39_06';
+$VERSION = '1.40';
$header = "perl5db.pl version $VERSION";
# Since we're only saving $@, we only have to localize the array element
# that it will be stored in.
local $saved[0]; # Preserve the old value of $@
- eval { DB::save() };
+ eval { &DB::save };
# Now see whether we need to report an error back to the user.
if ($at) {
our ($runnonstop);
+# Local autoflush to avoid rt#116769,
+# as calling IO::File methods causes an unresolvable loop
+# that results in debugger failure.
+sub _autoflush {
+ my $o = select($_[0]);
+ $|++;
+ select($o);
+}
+
if ($notty) {
$runnonstop = 1;
share($runnonstop);
undef $console;
}
-=item * Unix - use C</dev/tty>.
+=item * Unix - use F</dev/tty>.
=cut
} ## end elsif (from if(defined $remoteport))
# Unbuffer DB::OUT. We need to see responses right away.
- $OUT->autoflush(1);
+ _autoflush($OUT);
# Line info goes to debugger output unless pointed elsewhere.
# Pointing elsewhere makes it possible for slave editors to
# see if we should stop. If so, remove the one-time sigil.
elsif ($stop) {
$evalarg = "\$DB::signal |= 1 if do {$stop}";
- DB::eval();
+ # The &-call is here to ascertain the mutability of @_.
+ &DB::eval;
# If the breakpoint is temporary, then delete its enabled status.
if ($dbline{$line} =~ s/;9($|\0)/$1/) {
_cancel_breakpoint_temp_enabled_status($filename, $line);
setterm();
}
- # ... and it belogs to this PID or we get one for this PID ...
+ # ... and it belongs to this PID or we get one for this PID ...
if ($term_pid != $$) {
resetterm(1);
}
# If the pattern isn't null ...
if ( $inpat ne "" ) {
- # Turn of warn and die procesing for a bit.
+ # Turn off warn and die processing for a bit.
local $SIG{__DIE__};
local $SIG{__WARN__};
if $pager =~ /^\|/
&& ( "" eq $SIG{PIPE} || "DEFAULT" eq $SIG{PIPE} );
- OUT->autoflush(1);
+ _autoflush(\*OUT);
# Save current filehandle, and put it back.
$obj->selected(scalar( select(OUT) ));
# Don't put it back if pager was a pipe.
return;
}
+sub _DB__handle_watch_expressions
+{
+ my $self = shift;
+
+ if ( $DB::trace & 2 ) {
+ for my $n (0 .. $#DB::to_watch) {
+ $DB::evalarg = $DB::to_watch[$n];
+ local $DB::onetimeDump; # Tell DB::eval() to not output results
+
+ # Fix context DB::eval() wants to return an array, but
+ # we need a scalar here.
+ my ($val) = join( "', '", DB::eval(@_) );
+ $val = ( ( defined $val ) ? "'$val'" : 'undef' );
+
+ # Did it change?
+ if ( $val ne $DB::old_watch[$n] ) {
+
+ # Yep! Show the difference, and fake an interrupt.
+ $DB::signal = 1;
+ print {$DB::OUT} <<EOP;
+Watchpoint $n:\t$DB::to_watch[$n] changed:
+ old value:\t$DB::old_watch[$n]
+ new value:\t$val
+EOP
+ $DB::old_watch[$n] = $val;
+ } ## end if ($val ne $old_watch...
+ } ## end for my $n (0 ..
+ } ## end if ($trace & 2)
+
+ return;
+}
+
# 't' is type.
# 'm' is method.
# 'v' is the value (i.e: method name or subroutine ref).
{ t => 's', v => \&_DB__handle_restart_and_rerun_commands, },
} qw(R rerun)),
(map { $_ => {t => 'm', v => '_handle_cmd_wrapper_commands' }, }
- qw(a A b B e E h i l L M o O P v w W)),
+ qw(a A b B e E h i l L M o O v w W)),
);
sub DB {
# Last line in the program.
$max = $#dbline;
- _DB__determine_if_we_should_break(@_);
+ # The &-call is here to ascertain the mutability of @_.
+ &_DB__determine_if_we_should_break;
# Preserve the current stop-or-not, and see if any of the W
# (watch expressions) has changed.
my $was_signal = $signal;
# If we have any watch expressions ...
- $obj->_DB__handle_watch_expressions(@_);
+ _DB__handle_watch_expressions($obj);
=head2 C<watchfunction()>
# If there's an action, do it now.
if ($action) {
$evalarg = $action;
- DB::eval();
+ # The &-call is here to ascertain the mutability of @_.
+ &DB::eval;
}
# Are we nested another level (e.g., did we evaluate a function
# Do any pre-prompt actions.
foreach $evalarg (@$pre) {
- DB::eval();
+ # The &-call is here to ascertain the mutability of @_.
+ &DB::eval;
}
# Complain about too much recursion if we passed the limit.
=head4 C<$rc> - Recall command
Manages the commands in C<@hist> (which is created if C<Term::ReadLine> reports
-that the terminal supports history). It find the the command required, puts it
+that the terminal supports history). It finds the command required, puts it
into C<$cmd>, and redoes the loop to execute it.
=cut
$evalarg = "\$^D = \$^D | \$DB::db_stop;\n$cmd";
# Run *our* eval that executes in the caller's context.
- DB::eval();
+ # The &-call is here to ascertain the mutability of @_.
+ &DB::eval;
# Turn off the one-time-dump stuff now.
if ($onetimeDump) {
# Evaluate post-prompt commands.
foreach $evalarg (@$post) {
- DB::eval();
+ # The &-call is here to ascertain the mutability of @_.
+ &DB::eval;
}
} # if ($single || $signal)
();
} ## end sub DB
+# Because DB::Obj is used above,
+#
+# my $obj = DB::Obj->new(
+#
+# The following package declaration must come before that,
+# or else runtime errors will occur with
+#
+# PERLDB_OPTS="autotrace nonstop"
+#
+# ( rt#116771 )
+BEGIN {
+
package DB::Obj;
sub new {
return;
}
-sub _DB__handle_watch_expressions
-{
- my $self = shift;
-
- if ( $trace & 2 ) {
- for my $n (0 .. $#to_watch) {
- $evalarg = $to_watch[$n];
- local $onetimeDump; # Tell DB::eval() to not output results
-
- # Fix context DB::eval() wants to return an array, but
- # we need a scalar here.
- my ($val) = join( "', '", DB::eval() );
- $val = ( ( defined $val ) ? "'$val'" : 'undef' );
-
- # Did it change?
- if ( $val ne $old_watch[$n] ) {
-
- # Yep! Show the difference, and fake an interrupt.
- $signal = 1;
- print {$OUT} <<EOP;
-Watchpoint $n:\t$to_watch[$n] changed:
- old value:\t$old_watch[$n]
- new value:\t$val
-EOP
- $old_watch[$n] = $val;
- } ## end if ($val ne $old_watch...
- } ## end for my $n (0 ..
- } ## end if ($trace & 2)
-
- return;
-}
-
sub _my_print_lineinfo
{
my ($self, $i, $incr_pos) = @_;
# man, perldoc, doc - show manual pages.
if (my ($man_page)
= $DB::cmd =~ /\A(?:man|(?:perl)?doc)\b(?:\s+([^(]*))?\z/) {
- runman($man_page);
+ DB::runman($man_page);
next CMD;
}
return;
}
+} ## end DB::Obj
+
package DB;
# The following code may be executed now:
my $line = shift;
foreach my $isa ( split( /\s+/, $line ) ) {
$evalarg = $isa;
- ($isa) = DB::eval();
+ # The &-call is here to ascertain the mutability of @_.
+ ($isa) = &DB::eval;
no strict 'refs';
print join(
', ',
# in the user's context. This version can handle expressions which
# return a list value.
$evalarg = $expr;
- my ($val) = join( ' ', DB::eval() );
+ # The &-call is here to ascertain the mutability of @_.
+ my ($val) = join( ' ', &DB::eval);
$val = ( defined $val ) ? "'$val'" : 'undef';
# Save the current value of the expression.
} ## end foreach (@to_watch)
# We don't bother to turn watching off because
- # a) we don't want to stop calling watchfunction() it it exists
+ # a) we don't want to stop calling watchfunction() if it exists
# b) foreach over a null list doesn't do anything anyway
} ## end elsif ($expr =~ /^(\S.*)/)
# Drop out if the user has lost interest and hit control-C.
last if $signal;
- # Set the separator so arrys print nice.
+ # Set the separator so arrays print nice.
local $" = ', ';
# Grab and stringify the arguments if they are there.
open( OUT, ">$o" ) or die "Cannot open TTY '$o' for write: $!";
$IN = \*IN;
$OUT = \*OUT;
- $OUT->autoflush(1);
+ _autoflush($OUT);
} ## end if ($tty)
# We don't have a TTY - try to find one via Term::Rendezvous.
}
# Unbuffer the output filehandle.
- $OUT->autoflush(1);
+ _autoflush($OUT);
# Point LINEINFO to the same output filehandle if it was there before.
$LINEINFO = $OUT if $switch_li;
open ($new_lineinfo_fh , $stream )
or _db_warn("Cannot open '$stream' for write");
$LINEINFO = $new_lineinfo_fh;
- $LINEINFO->autoflush(1);
+ _autoflush($LINEINFO);
}
return $lineinfo;
=cut
-my %_is_in_pods = (map { $_ => 1 }
- qw(
- 5004delta
- 5005delta
- 561delta
- 56delta
- 570delta
- 571delta
- 572delta
- 573delta
- 58delta
- 581delta
- 582delta
- 583delta
- 584delta
- 590delta
- 591delta
- 592delta
- aix
- amiga
- apio
- api
- artistic
- book
- boot
- bot
- bs2000
- call
- ce
- cheat
- clib
- cn
- compile
- cygwin
- data
- dbmfilter
- debguts
- debtut
- debug
- delta
- dgux
- diag
- doc
- dos
- dsc
- ebcdic
- embed
- faq1
- faq2
- faq3
- faq4
- faq5
- faq6
- faq7
- faq8
- faq9
- faq
- filter
- fork
- form
- freebsd
- func
- gpl
- guts
- hack
- hist
- hpux
- hurd
- intern
- intro
- iol
- ipc
- irix
- jp
- ko
- lexwarn
- locale
- lol
- macos
- macosx
- modinstall
- modlib
- mod
- modstyle
- netware
- newmod
- number
- obj
- opentut
- op
- os2
- os390
- os400
- packtut
- plan9
- pod
- podspec
- port
- qnx
- ref
- reftut
- re
- requick
- reref
- retut
- run
- sec
- solaris
- style
- sub
- syn
- thrtut
- tie
- toc
- todo
- tooc
- toot
- trap
- tru64
- tw
- unicode
- uniintro
- util
- uts
- var
- vms
- vos
- win32
- xs
- xstut
- )
-);
-
sub runman {
my $page = shift;
unless ($page) {
$page = 'perl' if lc($page) eq 'help';
require Config;
- my $man1dir = $Config::Config{'man1dir'};
- my $man3dir = $Config::Config{'man3dir'};
+ my $man1dir = $Config::Config{man1direxp};
+ my $man3dir = $Config::Config{man3direxp};
for ( $man1dir, $man3dir ) { s#/[^/]*\z## if /\S/ }
my $manpath = '';
$manpath .= "$man1dir:" if $man1dir =~ /\S/;
chop $manpath if $manpath;
# harmless if missing, I figure
- my $oldpath = $ENV{MANPATH};
- $ENV{MANPATH} = $manpath if $manpath;
+ local $ENV{MANPATH} = $manpath if $manpath;
my $nopathopt = $^O =~ /dunno what goes here/;
if (
CORE::system(
)
{
unless ( $page =~ /^perl\w/ ) {
-# do it this way because its easier to slurp in to keep up to date - clunky though.
- if (exists($_is_in_pods{$page})) {
+ # Previously the debugger contained a list which it slurped in,
+ # listing the known "perl" manpages. However, it was out of date,
+ # with errors both of omission and inclusion. This approach is
+ # considerably less complex. The failure mode on a butchered
+ # install is simply that the user has to run man or perldoc
+ # "manually" with the full manpage name.
+
+ # There is a list of $^O values in installperl to determine whether
+ # the directory is 'pods' or 'pod'. However, we can avoid tight
+ # coupling to that by simply checking the "non-standard" 'pods'
+ # first.
+ my $pods = "$Config::Config{privlibexp}/pods";
+ $pods = "$Config::Config{privlibexp}/pod"
+ unless -d $pods;
+ if (-f "$pods/perl$page.pod") {
CORE::system( $doccmd,
( ( $manpath && !$nopathopt ) ? ( "-M", $manpath ) : () ),
"perl$page" );
}
}
} ## end if (CORE::system($doccmd...
- if ( defined $oldpath ) {
- $ENV{MANPATH} = $manpath;
- }
- else {
- delete $ENV{MANPATH};
- }
} ## end sub runman
#use Carp; # This did break, left for debugging
# This defines the point at which you get the 'deep recursion'
# warning. It MUST be defined or the debugger will not load.
- $deep = 100;
+ $deep = 1000;
# Number of lines around the current one that are shown in the
# 'w' command.
# The breakpoint was inside an eval. This is a little
# more difficult. XXX and I don't understand it.
- for (@hard) {
+ foreach my $hard_file (@hard) {
# Get over to the eval in question.
- *dbline = $main::{ '_<' . $_ };
- my ( $quoted, $sub, %subs, $line ) = quotemeta $_;
- for $sub ( keys %sub ) {
- next unless $sub{$sub} =~ /^$quoted:(\d+)-(\d+)$/;
- $subs{$sub} = [ $1, $2 ];
+ *dbline = $main::{ '_<' . $hard_file };
+ my $quoted = quotemeta $hard_file;
+ my %subs;
+ for my $sub ( keys %sub ) {
+ if (my ($n1, $n2) = $sub{$sub} =~ /\A$quoted:(\d+)-(\d+)\z/) {
+ $subs{$sub} = [ $n1, $n2 ];
+ }
}
unless (%subs) {
- print $OUT
- "No subroutines in $_, ignoring breakpoints.\n";
+ print {$OUT}
+ "No subroutines in $hard_file, ignoring breakpoints.\n";
next;
}
- LINES: for $line ( keys %dbline ) {
+ LINES: foreach my $line ( keys %dbline ) {
# One breakpoint per sub only:
- my ( $offset, $sub, $found );
- SUBS: for $sub ( keys %subs ) {
+ my ( $offset, $found );
+ SUBS: foreach my $sub ( keys %subs ) {
if (
- $subs{$sub}->[1] >=
- $line # Not after the subroutine
+ $subs{$sub}->[1] >= $line # Not after the subroutine
and (
not defined $offset # Not caught
- or $offset < 0
+ or $offset < 0
)
- )
+ )
{ # or badly caught
$found = $sub;
$offset = $line - $subs{$sub}->[0];
- $offset = "+$offset", last SUBS
- if $offset >= 0;
+ if ($offset >= 0) {
+ $offset = "+$offset";
+ last SUBS;
+ }
} ## end if ($subs{$sub}->[1] >=...
} ## end for $sub (keys %subs)
if ( defined $offset ) {
$postponed{$found} =
- "break $offset if $dbline{$line}";
+ "break $offset if $dbline{$line}";
}
else {
- print $OUT
-"Breakpoint in $_:$line ignored: after all the subroutines.\n";
+ print {$OUT}
+ ("Breakpoint in ${hard_file}:$line ignored:"
+ . " after all the subroutines.\n");
}
} ## end for $line (keys %dbline)
} ## end for (@hard)
# Get the current value of the expression.
# Doesn't handle expressions returning list values!
$evalarg = $1;
- my ($val) = DB::eval();
+ # The &-call is here to ascertain the mutability of @_.
+ my ($val) = &DB::eval;
$val = ( defined $val ) ? "'$val'" : 'undef';
# Save it.
my $which = '';
# Make sure we have some array or another to address later.
- # This means that if ssome reason the tests fail, we won't be
+ # This means that if for some reason the tests fail, we won't be
# trying to stash actions or delete them from the wrong place.
my $aref = [];
https://perl5.git.perl.org / perl5.git / blobdiff