From: "Paul Marquess" <paul_marquess@yahoo.co.uk>

[perl5.git] / Makefile.SH

diff --git a/Makefile.SH b/Makefile.SH
index 77ed8fe..21427ba 100644 (file)
--- a/Makefile.SH
+++ b/Makefile.SH
@@ -100,7 +100,7 @@ true)
        ;;
 esac
 
-case "`pwd`" in
+case "$ldlibpth" in
 # Protect any spaces
 *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;;
 esac
@@ -296,14 +296,14 @@ h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
 h5 = utf8.h warnings.h
 h = $(h1) $(h2) $(h3) $(h4) $(h5)
 
-c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
+c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c reentr.c
 c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c
 c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c
 c4 = globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c pp_sort.c
 
 c = $(c1) $(c2) $(c3) $(c4) miniperlmain.c perlmain.c
 
-obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
+obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT)
 obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
 obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
 
@@ -652,13 +652,16 @@ sperl$(OBJ_EXT): perl.c $(h)
 
 # We have to call our ./makedir because Ultrix 4.3 make can't handle the line
 #      test -d lib/auto || mkdir lib/auto
+# We need to autosplit in two steps because VOS can't handle so many args
 #
 .PHONY: preplibrary
-preplibrary: miniperl$(EXE_EXT) lib/Config.pm lib/lib.pm
+preplibrary: miniperl$(EXE_EXT) lib/Config.pm lib/lib.pm $(PREPLIBRARY_LIBPERL)
        @sh ./makedir lib/auto
        @echo " AutoSplitting perl library"
        $(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
-               autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
+               autosplit_lib_modules(@ARGV)' lib/*.pm
+       $(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
+               autosplit_lib_modules(@ARGV)' lib/*/*.pm
        $(MAKE) lib/re.pm
 
 # Take care to avoid modifying lib/Config.pm without reason
@@ -770,7 +773,7 @@ run_byacc:  FORCE check_byacc
            -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
        sed -e '/^extern YYSTYPE yy/D' y.tab.h >yh.tmp && mv yh.tmp y.tab.h
        cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h
-       perl -i perlyline.pl perly.c
+       perl -i.old perlyline.pl perly.c
        chmod 664 vms/perly_c.vms vms/perly_h.vms
        perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
 
@@ -890,7 +893,7 @@ _mopup:
        -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
        -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
        -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
-       -rm -f perlld cygwin.c ld2 libperl*.def libperl*.dll
+       -rm -f perlld cygwin.c ld2 libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
        rm -f perl$(EXE_EXT) suidperl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl
 
 # Do not 'make _tidy' directly.
@@ -912,8 +915,12 @@ _cleaner1:
        $(LDLIBPTH) sh ext/util/make_ext $(CLEAN) $$x MAKE=$(MAKE) ; \
        done
 
+# Some systems do not support "?", so keep these files separate.
 _cleaner2:
-       rm -f core core.*perl.*.? *perl.core t/core t/core.perl.*.? t/*perl.core t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests .?*.c so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
+       -rm -f core.*perl.*.? t/core.perl.*.? .?*.c
+       rm -f core *perl.core t/core t/*perl.core
+       rm -f t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests
+       rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
        rm -rf $(addedbyconf)
        rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
        rm -f $(private)
@@ -922,7 +929,9 @@ _cleaner2:
        rm -f h2ph.man pstruct
        rm -rf .config
        rm -f testcompile compilelog
-       -rmdir lib/B lib/Data lib/Digest lib/Encode lib/IO/Socket lib/IO/t lib/IO
+       -rmdir lib/B lib/Data lib/Digest
+       rm -rf lib/Encode
+       -rmdir lib/IO/Socket lib/IO/t lib/IO
        -rmdir lib/Filter/Util lib/List lib/MIME lib/PerlIO lib/Scalar lib/Sys
        -rmdir lib/Thread lib/XS
 
@@ -1051,10 +1060,14 @@ test_notty.deparse:     test_prep
 # Can't depend on lib/Config.pm because that might be where miniperl
 # is crashing.
 minitest: miniperl$(EXE_EXT) lib/re.pm
+       -@test -f lib/lib.pm && test -f lib/Config.pm || \
+         $(MAKE) lib/Config.pm lib/lib.pm
+       @echo " "
        @echo "You may see some irrelevant test failures if you have been unable"
-       @echo "to build lib/Config.pm."
+       @echo "to build lib/Config.pm or lib/lib.pm."
+       @echo " "
        - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
-               && $(LDLIBPTH) ./perl TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t </dev/tty
+               && $(LDLIBPTH) ./perl TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
 
 # Test via harness