my $patch_desc = "'" . join("',\n '", @patches) . "'";
my $patch_tags = join "", map /(\S+)/ ? "+$1 " : (), @patches;
-close PATCH_LEVEL;
+close(PATCH_LEVEL) or die "Error closing patchlevel.h: $!";
# TO DO (prehaps): store/embed $Config::config_sh into perlbug. When perlbug is
# used, compare $Config::config_sh with the stored version. If they differ then
$::HaveUtil = ($@ eq "");
};
-my $Version = "1.30";
+my $Version = "1.34";
# Changed in 1.06 to skip Mail::Send and Mail::Util if not available.
# Changed in 1.07 to see more sendmail execs, and added pipe output.
# Changed in 1.28 Additional questions for Perlbugtron RFOLEY 20.03.2000
# Changed in 1.29 Perlbug(tron): auto(-ok), short prompts RFOLEY 05-05-2000
# Changed in 1.30 Added warnings on failure to open files MSTEVENS 13-07-2000
+# Changed in 1.31 Add checks on close().Fix my $var unless. TJENNESS 26-07-2000
+# Changed in 1.32 Use File::Spec->tmpdir TJENNESS 20-08-2000
+# Changed in 1.33 Don't require -t STDOUT for -ok.
+# Changed in 1.34 Added Message-Id RFOLEY 18-06-2002
# TODO: - Allow the user to re-name the file on mail failure, and
# make sure failure (transmission-wise) of Mail::Send is
# accounted for.
# - Test -b option
-my( $file, $usefile, $cc, $address, $perlbug, $testaddress, $filename,
- $subject, $from, $verbose, $ed, $outfile, $Is_MacOS, $category, $severity,
- $fh, $me, $Is_MSWin32, $Is_VMS, $msg, $body, $andcc, %REP, $ok);
+my( $file, $usefile, $cc, $address, $perlbug, $testaddress, $filename, $messageid, $domain,
+ $subject, $from, $verbose, $ed, $outfile, $Is_MacOS, $category, $severity,
+ $fh, $me, $Is_MSWin32, $Is_Linux, $Is_VMS, $msg, $body, $andcc, %REP, $ok,
+ $Is_OpenBSD);
my $perl_version = $^V ? sprintf("v%vd", $^V) : $];
EOF
die "\n";
}
-if (!-t STDOUT && !$outfile) { Dump(*STDOUT); exit; }
Query();
Edit() unless $usefile || ($ok and not $::opt_n);
'default' => 'low',
'ok' => 'none',
'opts' => [qw(critical high medium low wishlist none)], # zero
- },
+ },
);
- die "Invalid alternative($name) requested\n" unless grep(/^$name$/, keys %alts);
+ die "Invalid alternative($name) requested\n" unless grep(/^$name$/, keys %alts);
my $alt = "";
if ($ok) {
$alt = $alts{$name}{'ok'};
$Is_MSWin32 = $^O eq 'MSWin32';
$Is_VMS = $^O eq 'VMS';
+ $Is_Linux = lc($^O) eq 'linux';
+ $Is_OpenBSD = lc($^O) eq 'openbsd';
$Is_MacOS = $^O eq 'MacOS';
@ARGV = split m/\s+/,
MacPerl::Ask('Provide command-line args here (-h for help):')
if $Is_MacOS && $MacPerl::Version =~ /App/;
- if (!getopts("dhva:s:b:f:F:r:e:SCc:to:n:")) { Help(); exit; };
+ if (!getopts("Adhva:s:b:f:F:r:e:SCc:to:n:")) { Help(); exit; };
# This comment is needed to notify metaconfig that we are
# using the $perladmin, $cf_by, and $cf_time definitions.
# -------- Configuration ---------
# perlbug address
- $perlbug = 'perlbug@perl.com';
+ $perlbug = 'perlbug@perl.org';
# Test address
- $testaddress = 'perlbug-test@perl.com';
+ $testaddress = 'perlbug-test@perl.org';
# Target address
$address = $::opt_a || ($::opt_t ? $testaddress : $perlbug);
# Body of report
$body = $::opt_b || "";
-
+
# Editor
$ed = $::opt_e || $ENV{VISUAL} || $ENV{EDITOR} || $ENV{EDIT}
|| ($Is_VMS && "edit/tpu")
|| $::Config{'cf_email'} || $::Config{'cf_by'}
);
+ if ($::HaveUtil) {
+ $domain = Mail::Util::maildomain();
+ } elsif ($Is_MSWin32) {
+ $domain = $ENV{'USERDOMAIN'};
+ } else {
+ require Sys::Hostname;
+ $domain = Sys::Hostname::hostname();
+ }
+
+ # Message-Id - rjsf
+ $messageid = "<$::Config{'version'}_${$}_".time."\@$domain>";
+
# My username
$me = $Is_MSWin32 ? $ENV{'USERNAME'}
: $^O eq 'os2' ? $ENV{'USER'} || $ENV{'LOGNAME'}
}
# Prompt for subject of message, if needed
+
+ if (TrivialSubject($subject)) {
+ $subject = '';
+ }
+
unless ($subject) {
paraprint <<EOF;
First of all, please provide a subject for the
the bug or problem. "perl bug" or "perl problem"
is not a concise description.
EOF
- print "Subject: ";
- $subject = <>;
my $err = 0;
- while ($subject !~ /\S/) {
- print "\nPlease enter a subject: ";
+ do {
+ print "Subject: ";
$subject = <>;
- if ($err++ > 5) {
+ chomp $subject;
+ if ($err++ == 5) {
die "Aborting.\n";
}
- }
- chop $subject;
+ } while (TrivialSubject($subject));
}
# Prompt for return address, if needed
}
unless ($guess) {
- my $domain;
- if ($::HaveUtil) {
- $domain = Mail::Util::maildomain();
- } elsif ($Is_MSWin32) {
- $domain = $ENV{'USERDOMAIN'};
- } else {
- require Sys::Hostname;
- $domain = Sys::Hostname::hostname();
- }
- if ($domain) {
+ # move $domain to where we can use it elsewhere
+ if ($domain) {
if ($Is_VMS && !$::Config{'d_socket'}) {
$guess = "$domain\:\:$me";
} else {
# verify it
print "Your address [$guess]: ";
$from = <>;
- chop $from;
+ chomp $from;
$from = $guess if $from eq '';
}
}
EOF
print "Local perl administrator [$cc]: ";
my $entry = scalar <>;
- chop $entry;
+ chomp $entry;
if ($entry ne "") {
$cc = $entry;
EOF
print "Editor [$ed]: ";
my $entry =scalar <>;
- chop $entry;
+ chomp $entry;
$usefile = 0;
if ($entry eq "file") {
EOF
print "Filename: ";
my $entry = scalar <>;
- chop $entry;
+ chomp $entry;
if ($entry eq "") {
paraprint <<EOF;
while (<F>) {
print REP $_
}
- close(F);
+ close(F) or die "Error closing `$file': $!";
} else {
print REP <<EOF;
EOF
}
Dump(*REP);
- close(REP);
+ close(REP) or die "Error closing report file: $!";
# read in the report template once so that
# we can track whether the user does any editing.
s/\s+//g;
$REP{$_}++;
}
- close(REP);
+ close(REP) or die "Error closing report file `$filename': $!";
} # sub Query
sub Dump {
Flags:
category=$category
severity=$severity
+EFF
+ if ($::opt_A) {
+ print OUT <<EFF;
+ ack=no
+EFF
+ }
+ print OUT <<EFF;
---
EFF
print OUT "This perlbug was built using Perl $config_tag1\n",
my @env =
qw(PATH LD_LIBRARY_PATH LANG PERL_BADLANG SHELL HOME LOGDIR LANGUAGE);
push @env, $Config{ldlibpthname} if $Config{ldlibpthname} ne '';
- push @env, grep /^(?:PERL|LC_|LANG)/, keys %ENV;
+ push @env, grep /^(?:PERL|LC_|LANG|CYGWIN)/, keys %ENV;
my %env;
@env{@env} = @env;
for my $env (sort keys %env) {
EOF
print "Editor [$ed]: ";
my $entry =scalar <>;
- chop $entry;
+ chomp $entry;
$ed = $entry unless $entry eq '';
}
tryagain:
- my $sts = system("$ed $filename") unless $Is_MacOS;
+ my $sts;
+ $sts = system("$ed $filename") unless $Is_MacOS;
if ($Is_MacOS) {
require ExtUtils::MakeMaker;
ExtUtils::MM_MacOS::launch_file($filename);
EOF
print "Editor [$ed]: ";
my $entry =scalar <>;
- chop $entry;
+ chomp $entry;
if ($entry ne "") {
$ed = $entry;
paraprint <<EOF;
Now that you have completed your report, would you like to send
the message to $address$andcc, display the message on
-the screen, re-edit it, or cancel without sending anything?
+the screen, re-edit it, display/change the subject,
+or cancel without sending anything?
You may also save the message as a file to mail at another time.
EOF
retry:
- print "Action (Send/Display/Edit/Cancel/Save to File): ";
+ print "Action (Send/Display/Edit/Subject/Save to File): ";
my $action = scalar <>;
- chop $action;
+ chomp $action;
if ($action =~ /^(f|sa)/i) { # <F>ile/<Sa>ve
- print "\n\nName of file to save message in [perlbug.rep]: ";
+ my $file_save = $outfile || "perlbug.rep";
+ print "\n\nName of file to save message in [$file_save]: ";
my $file = scalar <>;
- chop $file;
- $file = "perlbug.rep" if $file eq "";
+ chomp $file;
+ $file = $file_save if $file eq "";
unless (open(FILE, ">$file")) {
print "\nError opening $file: $!\n\n";
print FILE "To: $address\nSubject: $subject\n";
print FILE "Cc: $cc\n" if $cc;
print FILE "Reply-To: $from\n" if $from;
+ print FILE "Message-Id: $messageid\n" if $messageid;
print FILE "\n";
while (<REP>) { print FILE }
- close(REP);
- close(FILE);
+ close(REP) or die "Error closing report file `$filename': $!";
+ close(FILE) or die "Error closing $file: $!";
print "\nMessage saved in `$file'.\n";
exit;
# Display the message
open(REP, "<$filename") or die "Couldn't open file `$filename': $!\n";
while (<REP>) { print $_ }
- close(REP);
+ close(REP) or die "Error closing report file `$filename': $!";
+ } elsif ($action =~ /^su/i) { # <Su>bject
+ print "Subject: $subject\n";
+ print "If the above subject is fine, just press Enter.\n";
+ print "If not, type in the new subject.\n";
+ print "Subject: ";
+ my $reply = scalar <STDIN>;
+ chomp $reply;
+ if ($reply ne '') {
+ unless (TrivialSubject($reply)) {
+ $subject = $reply;
+ print "Subject: $subject\n";
+ }
+ }
} elsif ($action =~ /^se/i) { # <S>end
# Send the message
print "Are you certain you want to send this message?\n"
. 'Please type "yes" if you are: ';
my $reply = scalar <STDIN>;
- chop $reply;
+ chomp $reply;
if ($reply eq "yes") {
last;
} else {
Edit();
} elsif ($action =~ /^[qc]/i) { # <C>ancel, <Q>uit
Cancel();
- } elsif ($action =~ /^s/) {
+ } elsif ($action =~ /^s/i) {
paraprint <<EOF;
I'm sorry, but I didn't understand that. Please type "send" or "save".
EOF
}
} # sub NowWhat
+sub TrivialSubject {
+ my $subject = shift;
+ if ($subject =~
+ /^(y(es)?|no?|help|perl( (bug|problem))?|bug|problem)$/i ||
+ length($subject) < 4 ||
+ $subject !~ /\s/) {
+ print "\nThat doesn't look like a good subject. Please be more verbose.\n\n";
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
sub Send {
# Message has been accepted for transmission -- Send the message
if ($outfile) {
open SENDMAIL, ">$outfile" or die "Couldn't open '$outfile': $!\n";
goto sendout;
}
- if ($::HaveSend) {
+
+ # on linux certain mail implementations won't accept the subject
+ # as "~s subject" and thus the Subject header will be corrupted
+ # so don't use Mail::Send to be safe
+ if ($::HaveSend && !$Is_Linux && !$Is_OpenBSD) {
$msg = new Mail::Send Subject => $subject, To => $address;
$msg->cc($cc) if $cc;
$msg->add("Reply-To",$from) if $from;
$fh = $msg->open;
open(REP, "<$filename") or die "Couldn't open `$filename': $!\n";
while (<REP>) { print $fh $_ }
- close(REP);
+ close(REP) or die "Error closing $filename: $!";
$fh->close;
print "\nMessage sent.\n";
So you may attempt to find some way of sending your message, it has
been left in the file `$filename'.
EOF
- open(SENDMAIL, "|$sendmail -t") || die "'|$sendmail -t' failed: $!";
+ open(SENDMAIL, "|$sendmail -t -oi") || die "'|$sendmail -t -oi' failed: $!";
sendout:
print SENDMAIL "To: $address\n";
print SENDMAIL "Subject: $subject\n";
print SENDMAIL "Cc: $cc\n" if $cc;
print SENDMAIL "Reply-To: $from\n" if $from;
+ print SENDMAIL "Message-Id: $messageid\n" if $messageid;
print SENDMAIL "\n\n";
open(REP, "<$filename") or die "Couldn't open `$filename': $!\n";
while (<REP>) { print SENDMAIL $_ }
- close(REP);
+ close(REP) or die "Error closing $filename: $!";
if (close(SENDMAIL)) {
printf "\nMessage %s.\n", $outfile ? "saved" : "sent";
Usage:
$0 [-v] [-a address] [-s subject] [-b body | -f inpufile ] [ -F outputfile ]
[-r returnaddress] [-e editor] [-c adminaddress | -C] [-S] [-t] [-h]
-$0 [-v] [-r returnaddress] [-ok | -okay | -nok | -nokay]
+$0 [-v] [-r returnaddress] [-A] [-ok | -okay | -nok | -nokay]
Simplest usage: run "$0", and follow the prompts.
this if you don't give it here.
-e Editor to use.
-t Test mode. The target address defaults to `$testaddress'.
- -d Data mode (the default if you redirect or pipe output.)
- This prints out your configuration data, without mailing
+ -d Data mode. This prints out your configuration data, without mailing
anything. You can use this with -v to get more complete data.
+ -A Don't send a bug received acknowledgement to the return address.
-ok Report successful build on this system to perl porters
(use alone or with -v). Only use -ok if *everything* was ok:
if there were *any* problems at all, use -nok.
}
sub filename {
- my $dir = $Is_VMS ? 'sys$scratch:'
- : ($Is_MSWin32 && $ENV{'TEMP'}) ? $ENV{'TEMP'}
- : $Is_MacOS ? $ENV{'TMPDIR'}
- : '/tmp';
+ my $dir = File::Spec->tmpdir();
$filename = "bugrep0$$";
-# $dir .= "\\" if $Is_MSWin32 and $dir !~ m|[\\/]$|;
$filename++ while -e File::Spec->catfile($dir, $filename);
$filename = File::Spec->catfile($dir, $filename);
}
S<[ B<-b> I<body> | B<-f> I<inputfile> ]> S<[ B<-F> I<outputfile> ]>
S<[ B<-r> I<returnaddress> ]>
S<[ B<-e> I<editor> ]> S<[ B<-c> I<adminaddress> | B<-C> ]>
-S<[ B<-S> ]> S<[ B<-t> ]> S<[ B<-d> ]> S<[ B<-h> ]>
+S<[ B<-S> ]> S<[ B<-t> ]> S<[ B<-d> ]> S<[ B<-A> ]> S<[ B<-h> ]>
B<perlbug> S<[ B<-v> ]> S<[ B<-r> I<returnaddress> ]>
-S<[ B<-ok> | B<-okay> | B<-nok> | B<-nokay> ]>
+ S<[ B<-A> ]> S<[ B<-ok> | B<-okay> | B<-nok> | B<-nokay> ]>
=head1 DESCRIPTION
If you are unable to run B<perlbug> (most likely because you don't have
a working setup to send mail that perlbug recognizes), you may have to
-compose your own report, and email it to B<perlbug@perl.com>. You might
+compose your own report, and email it to B<perlbug@perl.org>. You might
find the B<-d> option useful to get summary information in that case.
In any case, when reporting a bug, please make sure you have run through
(C<diff> is being maintained by the GNU folks as part of the B<diffutils>
package, so you should be able to get it from any of the GNU software
repositories). If you do submit a patch, the cool-dude counter at
-perlbug@perl.com will register you as a savior of the world. Your
+perlbug@perl.org will register you as a savior of the world. Your
patch may be returned with requests for changes, or requests for more
detailed explanations about your fix.
crucial information about your version of perl. If C<perlbug> is unable
to mail your report after you have typed it in, you may have to compose
the message yourself, add the output produced by C<perlbug -d> and email
-it to B<perlbug@perl.com>. If, for some reason, you cannot run
+it to B<perlbug@perl.org>. If, for some reason, you cannot run
C<perlbug> at all on your system, be sure to include the entire output
produced by running C<perl -V> (note the uppercase V).
=item B<-a>
-Address to send the report to. Defaults to `perlbug@perl.com'.
+Address to send the report to. Defaults to B<perlbug@perl.org>.
+
+=item B<-A>
+
+Don't send a bug received acknowledgement to the reply address.
+Generally it is only a sensible to use this option if you are a
+perl maintainer actively watching perl porters for your message to
+arrive.
=item B<-b>
=item B<-t>
-Test mode. The target address defaults to `perlbug-test@perl.com'.
+Test mode. The target address defaults to B<perlbug-test@perl.org>.
=item B<-v>
(E<lt>tchrist@perl.comE<gt>), Nathan Torkington (E<lt>gnat@frii.comE<gt>),
Charles F. Randall (E<lt>cfr@pobox.comE<gt>), Mike Guy
(E<lt>mjtg@cam.a.ukE<gt>), Dominic Dunlop (E<lt>domo@computer.orgE<gt>),
-Hugo van der Sanden (E<lt>hv@crypt0.demon.co.ukE<gt>),
+Hugo van der Sanden (E<lt>hv@crypt.org<gt>),
Jarkko Hietaniemi (E<lt>jhi@iki.fiE<gt>), Chris Nandor
(E<lt>pudge@pobox.comE<gt>), Jon Orwant (E<lt>orwant@media.mit.eduE<gt>,
and Richard Foley (E<lt>richard@rfi.netE<gt>).
https://perl5.git.perl.org / perl5.git / blobdiff