# comp.sources.misc and is available on CPAN under authors/id/RAM so
# you may fetch it yourself from your nearest archive site.)
#
+#
+# Though this script was generated by metaconfig, it is OK to send
+# patches against it. It's up to the Configure pumpkin to backport
+# the patch to the metaunits if it is accepted.
+# See Porting/pumpkin.pod for more information on metaconfig.
+#
# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Wed May 7 23:33:48 EET DST 2003 [metaconfig 3.0 PL70]
+# Generated on Mon Apr 17 14:14:39 CEST 2006 [metaconfig 3.0 PL70]
# (with additional metaconfig patches by perlbug@perl.org)
cat >c1$$ <<EOF
paths="$paths /usr/5bin /etc /usr/gnu/bin /usr/new /usr/new/bin /usr/nbin"
paths="$paths /opt/gnu/bin /opt/new /opt/new/bin /opt/nbin"
paths="$paths /sys5.3/bin /sys5.3/usr/bin /bsd4.3/bin /bsd4.3/usr/ucb"
-paths="$paths /bsd4.3/usr/bin /usr/bsd /bsd43/bin /usr/ccs/bin"
+paths="$paths /bsd4.3/usr/bin /usr/bsd /bsd43/bin /opt/ansic/bin /usr/ccs/bin"
paths="$paths /etc /usr/lib /usr/ucblib /lib /usr/ccs/lib"
paths="$paths /sbin /usr/sbin /usr/libexec"
paths="$paths /system/gnu_library/bin"
targetarch=''
to=''
usecrosscompile=''
+mistrustnm=''
perllibs=''
dynamic_ext=''
extensions=''
baserev=''
bin=''
binexp=''
+initialinstalllocation=''
installbin=''
+userelocatableinc=''
byteorder=''
cc=''
ccflags=''
d_alarm=''
asctime_r_proto=''
d_asctime_r=''
-d_attribut=''
+d_attribute_format=''
+d_attribute_malloc=''
+d_attribute_nonnull=''
+d_attribute_noreturn=''
+d_attribute_pure=''
+d_attribute_unused=''
+d_attribute_warn_unused_result=''
d_bcmp=''
d_bcopy=''
+d_builtin_choose_expr=''
+d_builtin_expect=''
d_bzero=''
d_casti32=''
castflags=''
d_chroot=''
d_chsize=''
d_class=''
+d_clearenv=''
d_closedir=''
d_void_closedir=''
d_cmsghdr_s=''
d_ftello=''
d_ftime=''
d_gettimeod=''
+d_futimes=''
d_Gconvert=''
d_getcwd=''
d_getespwnam=''
d_killpg=''
d_lchown=''
d_ldbl_dig=''
+d_libm_lib_version=''
d_link=''
d_localtime_r=''
localtime_r_proto=''
d_lseekproto=''
d_lstat=''
d_madvise=''
+d_malloc_good_size=''
+d_malloc_size=''
d_mblen=''
d_mbstowcs=''
d_mbtowc=''
d_msgsnd=''
d_msync=''
d_munmap=''
-d_nanosleep=''
d_nice=''
d_nl_langinfo=''
d_off64_t=''
d_old_pthread_create_joinable=''
old_pthread_create_joinable=''
d_pthread_atfork=''
+d_pthread_attr_setscope=''
d_pthread_yield=''
d_sched_yield=''
sched_yield=''
d_sigaction=''
d_sigprocmask=''
d_sigsetjmp=''
+usesitecustomize=''
+d_snprintf=''
+d_vsnprintf=''
d_sockatmark=''
d_sockatmarkproto=''
d_msg_ctrunc=''
socketlib=''
d_socklen_t=''
d_socks5_init=''
+d_sprintf_returns_strlen=''
d_sqrtl=''
d_srand48_r=''
srand48_r_proto=''
d_strerror_r=''
strerror_r_proto=''
d_strftime=''
+d_strlcat=''
+d_strlcpy=''
d_strtod=''
d_strtol=''
d_strtold=''
d_semctl_semun=''
d_union_semun=''
d_unordered=''
+d_unsetenv=''
d_usleep=''
d_usleepproto=''
d_ustat=''
i_varargs=''
i_varhdr=''
i_vfork=''
+d_inc_version_list=''
inc_version_list=''
inc_version_list_init=''
installprefix=''
sSCNfldbl=''
lseeksize=''
lseektype=''
+mad=''
+madlyh=''
+madlyobj=''
+madlysrc=''
make_set_make=''
d_mymalloc=''
freetype=''
mallocobj=''
mallocsrc=''
malloctype=''
+usemallocwrap=''
usemymalloc=''
installman1dir=''
man1dir=''
perladmin=''
perlpath=''
d_nv_preserves_uv=''
+d_nv_zero_is_allbits_zero=''
i16size=''
i16type=''
i32size=''
sig_num=''
sig_num_init=''
sig_size=''
+d_sitearch=''
installsitearch=''
sitearch=''
sitearchexp=''
installsitebin=''
sitebin=''
sitebinexp=''
-installsitehtml1=''
-sitehtml1=''
-sitehtml1exp=''
-installsitehtml3=''
-sitehtml3=''
-sitehtml3exp=''
+installsitehtml1dir=''
+sitehtml1dir=''
+sitehtml1direxp=''
+installsitehtml3dir=''
+sitehtml3dir=''
+sitehtml3direxp=''
installsitelib=''
sitelib=''
sitelib_stem=''
sitelibexp=''
-installsiteman1=''
-siteman1=''
-siteman1exp=''
-installsiteman3=''
-siteman3=''
-siteman3exp=''
+installsiteman1dir=''
+siteman1dir=''
+siteman1direxp=''
+installsiteman3dir=''
+siteman3dir=''
+siteman3direxp=''
siteprefix=''
siteprefixexp=''
installsitescript=''
installvendorbin=''
vendorbin=''
vendorbinexp=''
-installvendorhtml1=''
-vendorhtml1=''
-vendorhtml1exp=''
-installvendorhtml3=''
-vendorhtml3=''
-vendorhtml3exp=''
+installvendorhtml1dir=''
+vendorhtml1dir=''
+vendorhtml1direxp=''
+installvendorhtml3dir=''
+vendorhtml3dir=''
+vendorhtml3direxp=''
d_vendorlib=''
installvendorlib=''
vendorlib=''
vendorlib_stem=''
vendorlibexp=''
-installvendorman1=''
-vendorman1=''
-vendorman1exp=''
-installvendorman3=''
-vendorman3=''
-vendorman3exp=''
+installvendorman1dir=''
+vendorman1dir=''
+vendorman1direxp=''
+installvendorman3dir=''
+vendorman3dir=''
+vendorman3direxp=''
usevendorprefix=''
vendorprefix=''
vendorprefixexp=''
versiononly=''
defvoidused=''
voidflags=''
-pm_apiversion=''
-xs_apiversion=''
yacc=''
yaccflags=''
CONFIG=''
fi
i_whoami=''
+ccname=''
+ccversion=''
+perllibs=''
+: set useposix=false in your hint file to disable the POSIX extension.
+useposix=true
+: set useopcode=false in your hint file to disable the Opcode extension.
+useopcode=true
+: Trailing extension. Override this in a hint file, if needed.
+: Extra object files, if any, needed on this platform.
+archobjs=''
+archname=''
: Possible local include directories to search.
: Set locincpth to "" in a hint file to defeat local include searches.
locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
: no include file wanted by default
inclwanted=''
-siteman1=''
-siteman3=''
-sitescript=''
-: Trailing extension. Override this in a hint file, if needed.
-: Extra object files, if any, needed on this platform.
-archobjs=''
+: Enable -DEBUGGING and -DDEBUGGING from the command line
+EBUGGING=''
+DEBUGGING=old
+
groupstype=''
libnames=''
: change the next line if compiling for Xenix/286 on Xenix/386
libswanted=''
: some systems want to use only the non-versioned libso:s
ignore_versioned_solibs=''
-: full support for void wanted by default
-defvoidused=15
-
-ccname=''
-ccversion=''
-perllibs=''
-: set useposix=false in your hint file to disable the POSIX extension.
-useposix=true
-: set useopcode=false in your hint file to disable the Opcode extension.
-useopcode=true
+siteman1dir=''
+siteman3dir=''
+sitescript=''
archname64=''
ccflags_uselargefiles=''
ldflags_uselargefiles=''
libswanted_uselargefiles=''
: set usemultiplicity on the Configure command line to enable multiplicity.
: set usesocks on the Configure command line to enable socks.
-archname=''
: set usethreads on the Configure command line to enable threads.
usereentrant='undef'
+: full support for void wanted by default
+defvoidused=15
+
: List of libraries we want.
-: If anyone needs -lnet, put it in a hint file.
-libswanted='sfio socket bind inet nsl nm ndbm gdbm dbm db malloc dl'
-libswanted="$libswanted dld ld sun m c cposix posix"
-libswanted="$libswanted ndir dir crypt sec"
-libswanted="$libswanted ucb bsd BSD PW x util rt posix4"
+: If anyone needs extra -lxxx, put those in a hint file.
+libswanted="sfio socket bind inet nsl nm ndbm gdbm dbm db malloc dl dld ld sun"
+libswanted="$libswanted m crypt sec util c cposix posix ucb bsd BSD"
: We probably want to search /usr/shlib before most other libraries.
: This is only used by the lib/ExtUtils/MakeMaker.pm routine extliblist.
glibpth=`echo " $glibpth " | sed -e 's! /usr/shlib ! !'`
up='[:upper:]'
low='[:lower:]'
;;
-*) # There is a discontinuity in EBCDIC between 'I' and 'J'
- # (0xc9 and 0xd1), therefore that is a nice testing point.
- if test "X$up" = X -o "X$low" = X; then
- case "`echo IJ | $tr '[I-J]' '[i-j]' 2>/dev/null`" in
- ij) up='[A-Z]'
- low='[a-z]'
+*) # There is a discontinuity in EBCDIC between 'R' and 'S'
+ # (0xd9 and 0xe2), therefore that is a nice testing point.
+ if test "X$up" = X -o "X$low" = X; then
+ case "`echo RS | $tr '[R-S]' '[r-s]' 2>/dev/null`" in
+ rs) up='[A-Z]'
+ low='[a-z]'
;;
esac
- fi
+ fi
if test "X$up" = X -o "X$low" = X; then
- case "`echo IJ | $tr I-J i-j 2>/dev/null`" in
- ij) up='A-Z'
+ case "`echo RS | $tr R-S r-s 2>/dev/null`" in
+ rs) up='A-Z'
low='a-z'
;;
esac
- fi
+ fi
if test "X$up" = X -o "X$low" = X; then
- case "`echo IJ | od -x 2>/dev/null`" in
- *C9D1*|*c9d1*)
+ case "`echo RS | od -x 2>/dev/null`" in
+ *D9E2*|*d9e2*)
echo "Hey, this might be EBCDIC." >&4
if test "X$up" = X -o "X$low" = X; then
- case "`echo IJ | $tr '[A-IJ-RS-Z]' '[a-ij-rs-z]' 2>/dev/null`" in
- ij) up='[A-IJ-RS-Z]'
- low='[a-ij-rs-z]'
+ case "`echo RS | $tr '[A-IJ-RS-Z]' '[a-ij-rs-z]' 2>/dev/null`" in
+ rs) up='[A-IJ-RS-Z]'
+ low='[a-ij-rs-z]'
;;
esac
fi
if test "X$up" = X -o "X$low" = X; then
- case "`echo IJ | $tr A-IJ-RS-Z a-ij-rs-z 2>/dev/null`" in
- ij) up='A-IJ-RS-Z'
- low='a-ij-rs-z'
+ case "`echo RS | $tr A-IJ-RS-Z a-ij-rs-z 2>/dev/null`" in
+ rs) up='A-IJ-RS-Z'
+ low='a-ij-rs-z'
;;
esac
fi
esac
fi
esac
-case "`echo IJ | $tr \"$up\" \"$low\" 2>/dev/null`" in
-ij)
+case "`echo RS | $tr \"$up\" \"$low\" 2>/dev/null`" in
+rs)
echo "Using $up and $low to convert case." >&4
;;
*)
aix) osname=aix
tmp=`( (oslevel) 2>/dev/null || echo "not found") 2>&1`
case "$tmp" in
- 'not found') osvers="$4"."$3" ;;
+ # oslevel can fail with:
+ # oslevel: Unable to acquire lock.
+ *not\ found) osvers="$4"."$3" ;;
'<3240'|'<>3240') osvers=3.2.0 ;;
'=3240'|'>3240'|'<3250'|'<>3250') osvers=3.2.4 ;;
'=3250'|'>3250') osvers=3.2.5 ;;
domainos) osname=apollo
osvers="$3"
;;
- dgux) osname=dgux
+ dgux) osname=dgux
+ osvers="$3"
+ ;;
+ dragonfly) osname=dragonfly
osvers="$3"
;;
dynixptx*) osname=dynixptx
osvers=`echo "$4"|sed 's/^v//'`
;;
- freebsd) osname=freebsd
+ freebsd) osname=freebsd
osvers="$3" ;;
- genix) osname=genix ;;
- hp*) osname=hpux
+ genix) osname=genix ;;
+ gnu) osname=gnu
+ osvers="$3" ;;
+ hp*) osname=hpux
osvers=`echo "$3" | $sed 's,.*\.\([0-9]*\.[0-9]*\),\1,'`
;;
- irix*) osname=irix
+ irix*) osname=irix
case "$3" in
4*) osvers=4 ;;
5*) osvers=5 ;;
*) osvers="$3" ;;
esac
;;
- linux) osname=linux
+ linux) osname=linux
case "$3" in
*) osvers="$3" ;;
esac
;;
- MiNT) osname=mint
+ MiNT) osname=mint
;;
netbsd*) osname=netbsd
osvers="$3"
*freebsd*) ;;
svr*)
: svr4.x or possibly later
- case "svr$3" in
+ case "svr$3" in
${osname}*)
osname=svr$3
osvers=$4
osvers="$5"
fi
fi
-
+
case "$targetarch" in
'') ;;
*) hostarch=$osname
: who configured the system
cf_time=`LC_ALL=C; LANGUAGE=C; export LC_ALL; export LANGUAGE; $date 2>&1`
-cf_by=`(logname) 2>/dev/null`
case "$cf_by" in
"")
- cf_by=`(whoami) 2>/dev/null`
+ cf_by=`(logname) 2>/dev/null`
case "$cf_by" in
- "") cf_by=unknown ;;
+ "")
+ cf_by=`(whoami) 2>/dev/null`
+ case "$cf_by" in
+ "") cf_by=unknown ;;
+ esac ;;
esac ;;
esac
-: set up the script used to warn in case of inconsistency
-cat <<EOS >whoa
-$startsh
-EOS
-cat <<'EOSC' >>whoa
-dflt=y
-echo " "
-echo "*** WHOA THERE!!! ***" >&4
-echo " The $hint value for \$$var on this machine was \"$was\"!" >&4
-rp=" Keep the $hint value?"
-. ./myread
-case "$ans" in
-y) td=$was; tu=$was;;
+: decide how portable to be. Allow command line overrides.
+case "$d_portable" in
+"$undef") ;;
+*) d_portable="$define" ;;
esac
-EOSC
-
-: function used to set $1 to $val
-setvar='var=$1; eval "was=\$$1"; td=$define; tu=$undef;
-case "$val$was" in
-$define$undef) . ./whoa; eval "$var=\$td";;
-$undef$define) . ./whoa; eval "$var=\$tu";;
-*) eval "$var=$val";;
-esac'
-case "$usesocks" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
+: set up shell script to do ~ expansion
+cat >filexp <<EOSS
+$startsh
+: expand filename
+case "\$1" in
+ ~/*|~)
+ echo \$1 | $sed "s|~|\${HOME-\$LOGDIR}|"
+ ;;
+ ~*)
+ if $test -f /bin/csh; then
+ /bin/csh -f -c "glob \$1"
+ failed=\$?
+ echo ""
+ exit \$failed
+ else
+ name=\`$expr x\$1 : '..\([^/]*\)'\`
+ dir=\`$sed -n -e "/^\${name}:/{s/^[^:]*:[^:]*:[^:]*:[^:]*:[^:]*:\([^:]*\).*"'\$'"/\1/" -e p -e q -e '}' </etc/passwd\`
+ if $test ! -d "\$dir"; then
+ me=\`basename \$0\`
+ echo "\$me: can't locate home directory for: \$name" >&2
+ exit 1
+ fi
+ case "\$1" in
+ */*)
+ echo \$dir/\`$expr x\$1 : '..[^/]*/\(.*\)'\`
+ ;;
+ *)
+ echo \$dir
+ ;;
+ esac
+ fi
+ ;;
+*)
+ echo \$1
+ ;;
esac
-cat <<EOM
-
-Perl can be built to use the SOCKS proxy protocol library. To do so,
-Configure must be run with -Dusesocks. If you use SOCKS you also need
-to use the PerlIO abstraction layer, this will be implicitly selected.
+EOSS
+chmod +x filexp
+$eunicefix filexp
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Build Perl for SOCKS?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
+: now set up to get a file name
+cat <<EOS >getfile
+$startsh
+EOS
+cat <<'EOSC' >>getfile
+tilde=''
+fullpath=''
+already=''
+skip=''
+none_ok=''
+exp_file=''
+nopath_ok=''
+orig_rp="$rp"
+orig_dflt="$dflt"
+case "$gfpth" in
+'') gfpth='.' ;;
esac
-set usesocks
-eval $setvar
-case "$usesocks" in
-$define|true|[yY]*) useperlio="$define";;
+case "$fn" in
+*\(*)
+ : getfile will accept an answer from the comma-separated list
+ : enclosed in parentheses even if it does not meet other criteria.
+ expr "$fn" : '.*(\(.*\)).*' | $tr ',' $trnl >getfile.ok
+ fn=`echo $fn | sed 's/(.*)//'`
+ ;;
esac
-case "$useperlio" in
-$define|true|[yY]*|'') dflt='y';;
-*) dflt='n';;
+case "$fn" in
+*:*)
+ loc_file=`expr $fn : '.*:\(.*\)'`
+ fn=`expr $fn : '\(.*\):.*'`
+ ;;
esac
-cat <<EOM
-
-Previous version of $package used the standard IO mechanisms as
-defined in <stdio.h>. Versions 5.003_02 and later of $package allow
-alternate IO mechanisms via the PerlIO abstraction layer, but the
-stdio mechanism is still available if needed. The abstraction layer
-can use AT&T's sfio (if you already have sfio installed) or regular stdio.
-Using PerlIO with sfio may cause problems with some extension modules.
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Use the PerlIO abstraction layer?'
-. ./myread
-case "$ans" in
-y|Y)
- val="$define"
- ;;
-*)
- echo "Ok, doing things the stdio way."
- val="$undef"
- ;;
+case "$fn" in
+*~*) tilde=true;;
+esac
+case "$fn" in
+*/*) fullpath=true;;
+esac
+case "$fn" in
+*+*) skip=true;;
+esac
+case "$fn" in
+*n*) none_ok=true;;
+esac
+case "$fn" in
+*e*) exp_file=true;;
+esac
+case "$fn" in
+*p*) nopath_ok=true;;
esac
-set useperlio
-eval $setvar
-case "$usesocks" in
-$define|true|[yY]*)
- case "$useperlio" in
- $define|true|[yY]*) ;;
- *) cat >&4 <<EOM
+case "$fn" in
+*f*) type='File';;
+*d*) type='Directory';;
+*l*) type='Locate';;
+esac
-You are using the SOCKS proxy protocol library which means that you
-should also use the PerlIO layer. You may be headed for trouble.
+what="$type"
+case "$what" in
+Locate) what='File';;
+esac
-EOM
- ;;
+case "$exp_file" in
+'')
+ case "$d_portable" in
+ "$define") ;;
+ *) exp_file=true;;
esac
;;
esac
-
-case "$usethreads" in
-$define|true|[yY]*) dflt='y';;
-*) # Catch case where user specified ithreads or 5005threads but
- # forgot -Dusethreads (A.D. 4/2002)
- case "$useithreads$use5005threads" in
- *$define*)
- case "$useperlio" in
- "$define") dflt='y' ;;
- *) dflt='n' ;;
+cd ..
+while test "$type"; do
+ redo=''
+ rp="$orig_rp"
+ dflt="$orig_dflt"
+ case "$tilde" in
+ true) rp="$rp (~name ok)";;
+ esac
+ . UU/myread
+ if test -f UU/getfile.ok && \
+ $contains "^$ans\$" UU/getfile.ok >/dev/null 2>&1
+ then
+ value="$ans"
+ ansexp="$ans"
+ break
+ fi
+ case "$ans" in
+ none)
+ value=''
+ ansexp=''
+ case "$none_ok" in
+ true) type='';;
esac
;;
- *) dflt='n';;
- esac
- ;;
-esac
-cat <<EOM
+ *)
+ case "$tilde" in
+ '') value="$ans"
+ ansexp="$ans";;
+ *)
+ value=`UU/filexp $ans`
+ case $? in
+ 0)
+ if test "$ans" != "$value"; then
+ echo "(That expands to $value on this system.)"
+ fi
+ ;;
+ *) value="$ans";;
+ esac
+ ansexp="$value"
+ case "$exp_file" in
+ '') value="$ans";;
+ esac
+ ;;
+ esac
+ case "$fullpath" in
+ true)
+ case "$ansexp" in
+ /*) value="$ansexp" ;;
+ [a-zA-Z]:/*) value="$ansexp" ;;
+ *)
+ redo=true
+ case "$already" in
+ true)
+ echo "I shall only accept a full path name, as in /bin/ls." >&4
+ echo "Use a ! shell escape if you wish to check pathnames." >&4
+ ;;
+ *)
+ echo "Please give a full path name, starting with slash." >&4
+ case "$tilde" in
+ true)
+ echo "Note that using ~name is ok provided it expands well." >&4
+ already=true
+ ;;
+ esac
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ case "$redo" in
+ '')
+ case "$type" in
+ File)
+ for fp in $gfpth; do
+ if test "X$fp" = X.; then
+ pf="$ansexp"
+ else
+ pf="$fp/$ansexp"
+ fi
+ if test -f "$pf"; then
+ type=''
+ elif test -r "$pf" || (test -h "$pf") >/dev/null 2>&1
+ then
+ echo "($value is not a plain file, but that's ok.)"
+ type=''
+ fi
+ if test X"$type" = X; then
+ value="$pf"
+ break
+ fi
+ done
+ ;;
+ Directory)
+ for fp in $gfpth; do
+ if test "X$fp" = X.; then
+ dir="$ans"
+ direxp="$ansexp"
+ else
+ dir="$fp/$ansexp"
+ direxp="$fp/$ansexp"
+ fi
+ if test -d "$direxp"; then
+ type=''
+ value="$dir"
+ break
+ fi
+ done
+ ;;
+ Locate)
+ if test -d "$ansexp"; then
+ echo "(Looking for $loc_file in directory $value.)"
+ value="$value/$loc_file"
+ ansexp="$ansexp/$loc_file"
+ fi
+ if test -f "$ansexp"; then
+ type=''
+ fi
+ case "$nopath_ok" in
+ true) case "$value" in
+ */*) ;;
+ *) echo "Assuming $value will be in people's path."
+ type=''
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
-Perl can be built to take advantage of threads on some systems.
-To do so, Configure can be run with -Dusethreads.
+ case "$skip" in
+ true) type='';
+ esac
-Note that Perl built with threading support runs slightly slower
-and uses more memory than plain Perl. The current implementation
-is believed to be stable, but it is fairly new, and so should be
-treated with caution.
+ case "$type" in
+ '') ;;
+ *)
+ if test "$fastread" = yes; then
+ dflt=y
+ else
+ dflt=n
+ fi
+ rp="$what $value doesn't exist. Use that name anyway?"
+ . UU/myread
+ dflt=''
+ case "$ans" in
+ y*) type='';;
+ *) echo " ";;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+done
+cd UU
+ans="$value"
+rp="$orig_rp"
+dflt="$orig_dflt"
+rm -f getfile.ok
+test "X$gfpthkeep" != Xy && gfpth=""
+EOSC
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Build a threading Perl?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
+: determine root of directory hierarchy where package will be installed.
+case "$prefix" in
+'')
+ dflt=`./loc . /usr/local /usr/local /local /opt /usr`
+ ;;
+*?/)
+ dflt=`echo "$prefix" | sed 's/.$//'`
+ ;;
+*)
+ dflt="$prefix"
+ ;;
esac
-set usethreads
-eval $setvar
-
-case "$usethreads" in
-$define)
- $cat <<EOM
+$cat <<EOM
-Since release 5.6, Perl has had two different threading implementations,
-the newer interpreter-based version (ithreads) with one interpreter per
-thread, and the older 5.005 version (5005threads).
-The 5005threads version is effectively unmaintained and will probably be
-removed in Perl 5.10, so there should be no need to build a Perl using it
-unless needed for backwards compatibility with some existing 5.005threads
-code.
+By default, $package will be installed in $dflt/bin, manual pages
+under $dflt/man, etc..., i.e. with $dflt as prefix for all
+installation directories. Typically this is something like /usr/local.
+If you wish to have binaries under /usr/bin but other parts of the
+installation under /usr/local, that's ok: you will be prompted
+separately for each of the installation directories, the prefix being
+only used to set the defaults.
EOM
- : Default to ithreads unless overridden on command line or with
- : old config.sh
- dflt='y'
- case "$use5005threads" in
- $define|true|[yY]*) dflt='n';;
- esac
- case "$useithreads" in
- $undef|false|[nN]*) dflt='n';;
- esac
- rp='Use the newer interpreter-based ithreads?'
- . ./myread
+fn=d~
+rp='Installation prefix to use?'
+. ./getfile
+oldprefix=''
+case "$prefix" in
+'') ;;
+*)
case "$ans" in
- y|Y) val="$define" ;;
- *) val="$undef" ;;
- esac
- set useithreads
- eval $setvar
- : Now set use5005threads to the opposite value.
- case "$useithreads" in
- $define) val="$undef" ;;
- *) val="$define" ;;
+ "$prefix") ;;
+ *) oldprefix="$prefix";;
esac
- set use5005threads
- eval $setvar
- ;;
-*)
- useithreads="$undef"
- use5005threads="$undef"
;;
esac
+prefix="$ans"
+prefixexp="$ansexp"
-case "$useithreads$use5005threads" in
-"$define$define")
- $cat >&4 <<EOM
-
-You cannot have both the ithreads and the 5.005 threads enabled
-at the same time. Disabling the 5.005 threads since they are
-much less stable than the ithreads.
+case "$afsroot" in
+'') afsroot=/afs ;;
+*) afsroot=$afsroot ;;
+esac
-EOM
- use5005threads="$undef"
+: is AFS running?
+echo " "
+case "$afs" in
+$define|true) afs=true ;;
+$undef|false) afs=false ;;
+*) if test -d $afsroot; then
+ afs=true
+ else
+ afs=false
+ fi
;;
esac
-
-if test X"$usethreads" = "X$define" -a "X$useperlio" = "Xundef"; then
- cat >&4 <<EOF
-***
-*** To build with ithreads you must also use the PerlIO layer.
-*** Cannot continue, aborting.
-***
-EOF
- exit 1
+if $afs; then
+ echo "AFS may be running... I'll be extra cautious then..." >&4
+else
+ echo "AFS does not seem to be running..." >&4
fi
-case "$d_oldpthreads" in
-'') : Configure tests would be welcome here. For now, assume undef.
+: determine installation prefix for where package is to be installed.
+if $afs; then
+$cat <<EOM
+
+Since you are running AFS, I need to distinguish the directory in which
+files will reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
+
+EOM
+ case "$installprefix" in
+ '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installprefix";;
+ esac
+else
+$cat <<EOM
+
+In some special cases, particularly when building $package for distribution,
+it is convenient to distinguish the directory in which files should be
+installed from the directory ($prefix) in which they will
+eventually reside. For most users, these two directories are the same.
+
+EOM
+ case "$installprefix" in
+ '') dflt=$prefix ;;
+ *) dflt=$installprefix;;
+ esac
+fi
+fn=d~
+rp='What installation prefix should I use for installing files?'
+. ./getfile
+installprefix="$ans"
+installprefixexp="$ansexp"
+
+: Perform the prefixexp/installprefixexp correction if necessary
+cat <<EOS >installprefix
+$startsh
+EOS
+cat <<'EOSC' >>installprefix
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ eval "install${prefixvar}=\`echo \$${prefixvar}exp | sed \"s#^\$prefixexp#\$installprefixexp#\"\`"
+else
+ eval "install${prefixvar}=\"\$${prefixvar}exp\""
+fi
+EOSC
+chmod +x installprefix
+$eunicefix installprefix
+
+: Set variables such as privlib and privlibexp from the output of ./getfile
+: performing the prefixexp/installprefixexp correction if necessary.
+cat <<EOS >setprefixvar
+$startsh
+EOS
+cat <<'EOSC' >>setprefixvar
+eval "${prefixvar}=\"\$ans\""
+eval "${prefixvar}exp=\"\$ansexp\""
+. ./installprefix
+EOSC
+chmod +x setprefixvar
+$eunicefix setprefixvar
+
+: set up the script used to warn in case of inconsistency
+cat <<EOS >whoa
+$startsh
+EOS
+cat <<'EOSC' >>whoa
+dflt=y
+echo " "
+echo "*** WHOA THERE!!! ***" >&4
+echo " The $hint value for \$$var on this machine was \"$was\"!" >&4
+rp=" Keep the $hint value?"
+. ./myread
+case "$ans" in
+y) td=$was; tu=$was;;
+esac
+EOSC
+
+: function used to set $1 to $val
+setvar='var=$1; eval "was=\$$1"; td=$define; tu=$undef;
+case "$val$was" in
+$define$undef) . ./whoa; eval "$var=\$td";;
+$undef$define) . ./whoa; eval "$var=\$tu";;
+*) eval "$var=$val";;
+esac'
+
+case "$usesocks" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+cat <<EOM
+
+Perl can be built to use the SOCKS proxy protocol library. To do so,
+Configure must be run with -Dusesocks. If you use SOCKS you also need
+to use the PerlIO abstraction layer, this will be implicitly selected.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Build Perl for SOCKS?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set usesocks
+eval $setvar
+
+case "$usesocks" in
+$define|true|[yY]*) useperlio="$define";;
+esac
+
+case "$useperlio" in
+$define|true|[yY]*|'') dflt='y';;
+*) dflt='n';;
+esac
+cat <<EOM
+
+Previous version of $package used the standard IO mechanisms as
+defined in <stdio.h>. Versions 5.003_02 and later of $package allow
+alternate IO mechanisms via the PerlIO abstraction layer, but the
+stdio mechanism is still available if needed. The abstraction layer
+can use AT&T's sfio (if you already have sfio installed) or regular stdio.
+Using PerlIO with sfio may cause problems with some extension modules.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Use the PerlIO abstraction layer?'
+. ./myread
+case "$ans" in
+y|Y)
+ val="$define"
+ ;;
+*)
+ echo "Ok, doing things the stdio way."
+ val="$undef"
+ ;;
+esac
+set useperlio
+eval $setvar
+
+case "$usesocks" in
+$define|true|[yY]*)
+ case "$useperlio" in
+ $define|true|[yY]*) ;;
+ *) cat >&4 <<EOM
+
+You are using the SOCKS proxy protocol library which means that you
+should also use the PerlIO layer. You may be headed for trouble.
+
+EOM
+ ;;
+ esac
+ ;;
+esac
+
+
+case "$usethreads" in
+$define|true|[yY]*) dflt='y';;
+*) # Catch case where user specified ithreads or 5005threads but
+ # forgot -Dusethreads (A.D. 4/2002)
+ case "$useithreads$use5005threads" in
+ *$define*)
+ case "$useperlio" in
+ "$define") dflt='y' ;;
+ *) dflt='n' ;;
+ esac
+ ;;
+ *) dflt='n';;
+ esac
+ ;;
+esac
+cat <<EOM
+
+Perl can be built to take advantage of threads on some systems.
+To do so, Configure can be run with -Dusethreads.
+
+Note that Perl built with threading support runs slightly slower
+and uses more memory than plain Perl. The current implementation
+is believed to be stable, but it is fairly new, and so should be
+treated with caution.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Build a threading Perl?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set usethreads
+eval $setvar
+
+case "$usethreads" in
+$define)
+ $cat <<EOM
+
+Since release 5.6, Perl has had two different threading implementations,
+the newer interpreter-based version (ithreads) with one interpreter per
+thread, and the older 5.005 version (5005threads).
+The 5005threads version is effectively unmaintained and will probably be
+removed in Perl 5.10, so there should be no need to build a Perl using it
+unless needed for backwards compatibility with some existing 5.005threads
+code.
+
+EOM
+ : Default to ithreads unless overridden on command line or with
+ : old config.sh
+ dflt='y'
+ case "$use5005threads" in
+ $define|true|[yY]*) dflt='n';;
+ esac
+ case "$useithreads" in
+ $undef|false|[nN]*) dflt='n';;
+ esac
+ rp='Use the newer interpreter-based ithreads?'
+ . ./myread
+ case "$ans" in
+ y|Y) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ set useithreads
+ eval $setvar
+ : Now set use5005threads to the opposite value.
+ case "$useithreads" in
+ $define) val="$undef" ;;
+ *) val="$define" ;;
+ esac
+ set use5005threads
+ eval $setvar
+ ;;
+*)
+ useithreads="$undef"
+ use5005threads="$undef"
+ ;;
+esac
+
+case "$useithreads$use5005threads" in
+"$define$define")
+ $cat >&4 <<EOM
+
+You cannot have both the ithreads and the 5.005 threads enabled
+at the same time. Disabling the 5.005 threads since they are
+much less stable than the ithreads.
+
+EOM
+ use5005threads="$undef"
+ ;;
+esac
+
+if test X"$usethreads" = "X$define" -a "X$useperlio" = "Xundef"; then
+ cat >&4 <<EOF
+***
+*** To build with ithreads you must also use the PerlIO layer.
+*** Cannot continue, aborting.
+***
+EOF
+ exit 1
+fi
+
+case "$d_oldpthreads" in
+'') : Configure tests would be welcome here. For now, assume undef.
val="$undef" ;;
*) val="$d_oldpthreads" ;;
esac
eval $setvar
-case "$usethreads" in
-"$define"|true|[yY]*)
: Look for a hint-file generated 'call-back-unit'. If the
: user has specified that a threading perl is to be built,
: we may need to set or change some other defaults.
- if $test -f usethreads.cbu; then
- echo "Your platform has some specific hints for threaded builds, using them..."
- . ./usethreads.cbu
- else
+if $test -f usethreads.cbu; then
+ echo "Your platform has some specific hints regarding threaded builds, using them..."
+ . ./usethreads.cbu
+else
+ case "$usethreads" in
+ "$define"|true|[yY]*)
$cat <<EOM
-(Your platform doesn't have any specific hints for threaded builds.
+(Your platform does not have any specific hints for threaded builds.
Assuming POSIX threads, then.)
EOM
- fi
;;
-esac
+ esac
+fi
cat <<EOM
#ifdef __VERSION__
printf("%s\n", __VERSION__);
#else
- printf("%s\n", "1");
-#endif
-#endif
- return(0);
-}
-EOM
-if $cc -o try $ccflags $ldflags try.c; then
- gccversion=`$run ./try`
- case "$gccversion" in
- '') echo "You are not using GNU cc." ;;
- *) echo "You are using GNU cc $gccversion."
- ccname=gcc
- ;;
- esac
-else
- echo " "
- echo "*** WHOA THERE!!! ***" >&4
- echo " Your C compiler \"$cc\" doesn't seem to be working!" >&4
- case "$knowitall" in
- '')
- echo " You'd better start hunting for one and let me know about it." >&4
- exit 1
- ;;
- esac
-fi
-$rm -f try try.*
-case "$gccversion" in
-1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-esac
-case "$gccversion" in
-'') gccosandvers='' ;;
-*) gccshortvers=`echo "$gccversion"|sed 's/ .*//'`
- gccosandvers=`$cc -v 2>&1|grep '/specs$'|sed "s!.*/[^-/]*-[^-/]*-\([^-/]*\)/$gccshortvers/specs!\1!"`
- gccshortvers=''
- case "$gccosandvers" in
- $osname) gccosandvers='' ;; # linux gccs seem to have no linux osvers, grr
- $osname$osvers) ;; # looking good
- $osname*) cat <<EOM >&4
-
-*** WHOA THERE!!! ***
-
- Your gcc has not been compiled for the exact release of
- your operating system ($gccosandvers versus $osname$osvers).
-
- In general it is a good idea to keep gcc synchronized with
- the operating system because otherwise serious problems
- may ensue when trying to compile software, like Perl.
-
- I'm trying to be optimistic here, though, and will continue.
- If later during the configuration and build icky compilation
- problems appear (headerfile conflicts being the most common
- manifestation), I suggest reinstalling the gcc to match
- your operating system release.
-
-EOM
- ;;
- *) gccosandvers='' ;; # failed to parse, better be silent
- esac
- ;;
-esac
-case "$ccname" in
-'') ccname="$cc" ;;
-esac
-
-# gcc 3.* complain about adding -Idirectories that they already know about,
-# so we will take those off from locincpth.
-case "$gccversion" in
-3*)
- echo "main(){}">try.c
- for incdir in $locincpth; do
- warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
- grep '^c[cp]p*[01]: warning: changing search order '`
- if test "X$warn" != X; then
- locincpth=`echo " $locincpth " | sed "s! $incdir ! !"`
- fi
- done
- $rm -f try try.*
-esac
-
-: decide how portable to be. Allow command line overrides.
-case "$d_portable" in
-"$undef") ;;
-*) d_portable="$define" ;;
-esac
-
-: set up shell script to do ~ expansion
-cat >filexp <<EOSS
-$startsh
-: expand filename
-case "\$1" in
- ~/*|~)
- echo \$1 | $sed "s|~|\${HOME-\$LOGDIR}|"
- ;;
- ~*)
- if $test -f /bin/csh; then
- /bin/csh -f -c "glob \$1"
- failed=\$?
- echo ""
- exit \$failed
- else
- name=\`$expr x\$1 : '..\([^/]*\)'\`
- dir=\`$sed -n -e "/^\${name}:/{s/^[^:]*:[^:]*:[^:]*:[^:]*:[^:]*:\([^:]*\).*"'\$'"/\1/" -e p -e q -e '}' </etc/passwd\`
- if $test ! -d "\$dir"; then
- me=\`basename \$0\`
- echo "\$me: can't locate home directory for: \$name" >&2
- exit 1
- fi
- case "\$1" in
- */*)
- echo \$dir/\`$expr x\$1 : '..[^/]*/\(.*\)'\`
- ;;
- *)
- echo \$dir
- ;;
- esac
- fi
- ;;
-*)
- echo \$1
- ;;
-esac
-EOSS
-chmod +x filexp
-$eunicefix filexp
-
-: now set up to get a file name
-cat <<EOS >getfile
-$startsh
-EOS
-cat <<'EOSC' >>getfile
-tilde=''
-fullpath=''
-already=''
-skip=''
-none_ok=''
-exp_file=''
-nopath_ok=''
-orig_rp="$rp"
-orig_dflt="$dflt"
-case "$gfpth" in
-'') gfpth='.' ;;
-esac
-
-case "$fn" in
-*\(*)
- : getfile will accept an answer from the comma-separated list
- : enclosed in parentheses even if it does not meet other criteria.
- expr "$fn" : '.*(\(.*\)).*' | $tr ',' $trnl >getfile.ok
- fn=`echo $fn | sed 's/(.*)//'`
- ;;
-esac
-
-case "$fn" in
-*:*)
- loc_file=`expr $fn : '.*:\(.*\)'`
- fn=`expr $fn : '\(.*\):.*'`
- ;;
-esac
-
-case "$fn" in
-*~*) tilde=true;;
-esac
-case "$fn" in
-*/*) fullpath=true;;
-esac
-case "$fn" in
-*+*) skip=true;;
-esac
-case "$fn" in
-*n*) none_ok=true;;
-esac
-case "$fn" in
-*e*) exp_file=true;;
-esac
-case "$fn" in
-*p*) nopath_ok=true;;
-esac
-
-case "$fn" in
-*f*) type='File';;
-*d*) type='Directory';;
-*l*) type='Locate';;
-esac
-
-what="$type"
-case "$what" in
-Locate) what='File';;
-esac
-
-case "$exp_file" in
-'')
- case "$d_portable" in
- "$define") ;;
- *) exp_file=true;;
- esac
- ;;
-esac
-
-cd ..
-while test "$type"; do
- redo=''
- rp="$orig_rp"
- dflt="$orig_dflt"
- case "$tilde" in
- true) rp="$rp (~name ok)";;
- esac
- . UU/myread
- if test -f UU/getfile.ok && \
- $contains "^$ans\$" UU/getfile.ok >/dev/null 2>&1
- then
- value="$ans"
- ansexp="$ans"
- break
- fi
- case "$ans" in
- none)
- value=''
- ansexp=''
- case "$none_ok" in
- true) type='';;
- esac
- ;;
- *)
- case "$tilde" in
- '') value="$ans"
- ansexp="$ans";;
- *)
- value=`UU/filexp $ans`
- case $? in
- 0)
- if test "$ans" != "$value"; then
- echo "(That expands to $value on this system.)"
- fi
- ;;
- *) value="$ans";;
- esac
- ansexp="$value"
- case "$exp_file" in
- '') value="$ans";;
- esac
- ;;
- esac
- case "$fullpath" in
- true)
- case "$ansexp" in
- /*) value="$ansexp" ;;
- [a-zA-Z]:/*) value="$ansexp" ;;
- *)
- redo=true
- case "$already" in
- true)
- echo "I shall only accept a full path name, as in /bin/ls." >&4
- echo "Use a ! shell escape if you wish to check pathnames." >&4
- ;;
- *)
- echo "Please give a full path name, starting with slash." >&4
- case "$tilde" in
- true)
- echo "Note that using ~name is ok provided it expands well." >&4
- already=true
- ;;
- esac
- esac
- ;;
- esac
- ;;
- esac
- case "$redo" in
- '')
- case "$type" in
- File)
- for fp in $gfpth; do
- if test "X$fp" = X.; then
- pf="$ansexp"
- else
- pf="$fp/$ansexp"
- fi
- if test -f "$pf"; then
- type=''
- elif test -r "$pf" || (test -h "$pf") >/dev/null 2>&1
- then
- echo "($value is not a plain file, but that's ok.)"
- type=''
- fi
- if test X"$type" = X; then
- value="$pf"
- break
- fi
- done
- ;;
- Directory)
- for fp in $gfpth; do
- if test "X$fp" = X.; then
- dir="$ans"
- direxp="$ansexp"
- else
- dir="$fp/$ansexp"
- direxp="$fp/$ansexp"
- fi
- if test -d "$direxp"; then
- type=''
- value="$dir"
- break
- fi
- done
- ;;
- Locate)
- if test -d "$ansexp"; then
- echo "(Looking for $loc_file in directory $value.)"
- value="$value/$loc_file"
- ansexp="$ansexp/$loc_file"
- fi
- if test -f "$ansexp"; then
- type=''
- fi
- case "$nopath_ok" in
- true) case "$value" in
- */*) ;;
- *) echo "Assuming $value will be in people's path."
- type=''
- ;;
- esac
- ;;
- esac
- ;;
- esac
-
- case "$skip" in
- true) type='';
- esac
-
- case "$type" in
- '') ;;
- *)
- if test "$fastread" = yes; then
- dflt=y
- else
- dflt=n
- fi
- rp="$what $value doesn't exist. Use that name anyway?"
- . UU/myread
- dflt=''
- case "$ans" in
- y*) type='';;
- *) echo " ";;
- esac
- ;;
- esac
- ;;
- esac
+ printf("%s\n", "1");
+#endif
+#endif
+ return(0);
+}
+EOM
+if $cc -o try $ccflags $ldflags try.c; then
+ gccversion=`$run ./try`
+ case "$gccversion" in
+ '') echo "You are not using GNU cc." ;;
+ *) echo "You are using GNU cc $gccversion."
+ ccname=gcc
+ ;;
+ esac
+else
+ echo " "
+ echo "*** WHOA THERE!!! ***" >&4
+ echo " Your C compiler \"$cc\" doesn't seem to be working!" >&4
+ case "$knowitall" in
+ '')
+ echo " You'd better start hunting for one and let me know about it." >&4
+ exit 1
;;
esac
-done
-cd UU
-ans="$value"
-rp="$orig_rp"
-dflt="$orig_dflt"
-rm -f getfile.ok
-test "X$gfpthkeep" != Xy && gfpth=""
-EOSC
+fi
+$rm -f try try.*
+case "$gccversion" in
+1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
+esac
+case "$gccversion" in
+'') gccosandvers='' ;;
+*) gccshortvers=`echo "$gccversion"|sed 's/ .*//'`
+ gccosandvers=`$cc -v 2>&1|grep '/specs$'|sed "s!.*/[^-/]*-[^-/]*-\([^-/]*\)/$gccshortvers/specs!\1!"`
+ gccshortvers=''
+ case "$gccosandvers" in
+ $osname) gccosandvers='' ;; # linux gccs seem to have no linux osvers, grr
+ $osname$osvers) ;; # looking good
+ $osname*) cat <<EOM >&4
+
+*** WHOA THERE!!! ***
+
+ Your gcc has not been compiled for the exact release of
+ your operating system ($gccosandvers versus $osname$osvers).
+
+ In general it is a good idea to keep gcc synchronized with
+ the operating system because otherwise serious problems
+ may ensue when trying to compile software, like Perl.
+
+ I'm trying to be optimistic here, though, and will continue.
+ If later during the configuration and build icky compilation
+ problems appear (headerfile conflicts being the most common
+ manifestation), I suggest reinstalling the gcc to match
+ your operating system release.
+
+EOM
+ ;;
+ *) gccosandvers='' ;; # failed to parse, better be silent
+ esac
+ ;;
+esac
+case "$ccname" in
+'') ccname="$cc" ;;
+esac
+
+# gcc 3.* complain about adding -Idirectories that they already know about,
+# so we will take those off from locincpth.
+case "$gccversion" in
+3*)
+ echo "main(){}">try.c
+ for incdir in $locincpth; do
+ warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
+ grep '^c[cp]p*[01]: warning: changing search order '`
+ if test "X$warn" != X; then
+ locincpth=`echo " $locincpth " | sed "s! $incdir ! !"`
+ fi
+ done
+ $rm -f try try.*
+esac
: What should the include directory be ?
echo " "
true|[yY]*) uselongdouble="$define" ;;
esac
-case "$uselongdouble" in
-$define)
: Look for a hint-file generated 'call-back-unit'. If the
: user has specified that long doubles should be used,
: we may need to set or change some other defaults.
- if $test -f uselongdouble.cbu; then
- echo "Your platform has some specific hints for long doubles, using them..."
- . ./uselongdouble.cbu
- else
+if $test -f uselongdouble.cbu; then
+ echo "Your platform has some specific hints regarding long doubles, using them..."
+ . ./uselongdouble.cbu
+else
+ case "$uselongdouble" in
+ $define)
$cat <<EOM
-(Your platform doesn't have any specific hints for long doubles.)
+(Your platform does not have any specific hints for long doubles.)
EOM
- fi
;;
-esac
+ esac
+fi
: Looking for optional libraries
echo " "
'none') optimize=" ";;
esac
+: Check what DEBUGGING is required from the command line
+: -DEBUGGING or -DDEBUGGING or
+: -DEBUGGING=both = -g + -DDEBUGGING
+: -DEBUGGING=-g or -Doptimize=-g = -g
+: -DEBUGGING=none or -UDEBUGGING =
+: -DEBUGGING=old or -DEBUGGING=default = ? $optimize
+case "$EBUGGING" in
+'') ;;
+*) DEBUGGING=$EBUGGING ;;
+esac
+
+case "$DEBUGGING" in
+-g|$define)
+ case "$optimize" in
+ *-g*) ;;
+ *) optimize="$optimize -g" ;;
+ esac ;;
+none|$undef)
+ case "$optimize" in
+ *-g*) set `echo "X $optimize " | sed 's/ -g / /'`
+ shift
+ optimize="$*"
+ ;;
+ esac ;;
+esac
+
dflt=''
+case "$DEBUGGING" in
+both|$define) dflt='-DDEBUGGING'
+esac
+
: We will not override a previous value, but we might want to
: augment a hint file
case "$hint" in
default|recommended)
case "$gccversion" in
- 1*) dflt='-fpcc-struct-return' ;;
+ 1*) dflt="$dflt -fpcc-struct-return" ;;
esac
- case "$optimize" in
- *-g*) dflt="$dflt -DDEBUGGING";;
+ case "$optimize:$DEBUGGING" in
+ *-g*:old) dflt="$dflt -DDEBUGGING";;
esac
case "$gccversion" in
2*) if test -d /etc/conf/kconfig.d &&
$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
then
+ # Interactive Systems (ISC) POSIX mode.
dflt="$dflt -posix"
fi
;;
if $cc -O2 -fno-strict-aliasing -o gcctest gcctest.c; then
echo "Yes, it does." 2>&1
case "$ccflags" in
- *strict-aliasing*)
+ *strict-aliasing*)
echo "Leaving current flags $ccflags alone." 2>&1
;;
*) dflt="$dflt -fno-strict-aliasing" ;;
fi
;;
esac
+ # For gcc, adding -pipe speeds up compilations for some, but apparently
+ # some assemblers can't read from stdin. (It also slows down compilations
+ # in other cases, but those are apparently rarer these days.) AD 5/2004.
+ case "$gccversion" in
+ ?*) echo " "
+ echo "Checking if your compiler accepts -pipe" 2>&1
+ echo 'int main(void) { return 0; }' > gcctest.c
+ if $cc -pipe -o gcctest gcctest.c; then
+ echo "Yes, it does." 2>&1
+ case "$ccflags" in
+ *-pipe*)
+ echo "Leaving current flags $ccflags alone." 2>&1
+ ;;
+ *) dflt="$dflt -pipe" ;;
+ esac
+ else
+ echo "Nope, it doesn't, but that's ok." 2>&1
+ fi
+
+ echo "Checking if your compiler accepts -Wdeclaration-after-statement" 2>&1
+ echo 'int main(void) { return 0; }' > gcctest.c
+ if $cc -Wdeclaration-after-statement -o gcctest gcctest.c; then
+ echo "Yes, it does." 2>&1
+ case "$ccflags" in
+ *-Wdeclaration-after-statement*)
+ echo "Leaving current flags $ccflags alone." 2>&1
+ ;;
+ *) dflt="$dflt -Wdeclaration-after-statement" ;;
+ esac
+ else
+ echo "Nope, it doesn't, but that's ok." 2>&1
+ fi
+ ;;
+ esac
;;
esac
if $test -d $thisincl; then
if $test x$thisincl != x$usrinc; then
case "$dflt" in
- *" -I$thisincl "*);;
- *) dflt="$dflt -I$thisincl ";;
+ *" -I$thisincl "*);;
+ *) dflt="$dflt -I$thisincl ";;
esac
fi
fi
for thislibdir in $libpth; do
case " $loclibpth " in
*" $thislibdir "*)
- case "$dflt " in
+ case "$dflt " in
*"-L$thislibdir "*) ;;
*) dflt="$dflt -L$thislibdir" ;;
esac
;;
esac
-case "$use64bitint" in
-"$define"|true|[yY]*)
: Look for a hint-file generated 'call-back-unit'. If the
: user has specified that a 64-bit perl is to be built,
: we may need to set or change some other defaults.
- if $test -f use64bitint.cbu; then
- echo "Your platform has some specific hints for 64-bit integers, using them..."
- . ./use64bitint.cbu
- fi
+if $test -f use64bitint.cbu; then
+ echo "Your platform has some specific hints regarding 64-bit integers, using them..."
+ . ./use64bitint.cbu
+fi
+case "$use64bitint" in
+"$define"|true|[yY]*)
case "$longsize" in
4) case "$archname64" in
'') archname64=64int ;;
;;
esac
-case "$use64bitall" in
-"$define"|true|[yY]*)
: Look for a hint-file generated 'call-back-unit'. If the
: user has specified that a maximally 64-bit perl is to be built,
: we may need to set or change some other defaults.
- if $test -f use64bitall.cbu; then
- echo "Your platform has some specific hints for 64-bit builds, using them..."
- . ./use64bitall.cbu
- fi
+if $test -f use64bitall.cbu; then
+ echo "Your platform has some specific hints regarding 64-bit builds, using them..."
+ . ./use64bitall.cbu
+fi
+case "$use64bitall" in
+"$define"|true|[yY]*)
case "$longsize" in
4) case "$archname64" in
''|64int) archname64=64all ;;
cat >&4 <<EOF
*** You have chosen to use 64-bit integers,
-*** but none cannot be found.
+*** but none can be found.
*** Please rerun Configure without -Duse64bitint and/or -Dusemorebits.
*** Cannot continue, aborting.
longdblsize="$ans"
fi
if $test "X$doublesize" = "X$longdblsize"; then
- echo "(That isn't any different from an ordinary double.)"
+ echo "That isn't any different from an ordinary double."
+ echo "I'll keep your setting anyway, but you may see some"
+ echo "harmless compilation warnings."
fi
;;
esac
;;
*) archname="$archname-$archname64"
echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
- esac
-esac
-case "$uselongdouble" in
-$define)
- echo "Long doubles selected." >&4
- case "$longdblsize" in
- $doublesize)
- echo "...but long doubles are equal to doubles, not changing architecture name." >&4
- ;;
- *)
- case "$archname" in
- *-ld*) echo "...and architecture name already has -ld." >&4
- ;;
- *) archname="$archname-ld"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
- esac
- ;;
-esac
-case "$useperlio" in
-$define)
- echo "Perlio selected." >&4
- ;;
-*)
- echo "Perlio not selected, using stdio." >&4
- case "$archname" in
- *-stdio*) echo "...and architecture name already has -stdio." >&4
- ;;
- *) archname="$archname-stdio"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-esac
-if $test -f archname.cbu; then
- echo "Your platform has some specific hints for architecture name, using them..."
- . ./archname.cbu
-fi
-
-: determine root of directory hierarchy where package will be installed.
-case "$prefix" in
-'')
- dflt=`./loc . /usr/local /usr/local /local /opt /usr`
- ;;
-*?/)
- dflt=`echo "$prefix" | sed 's/.$//'`
- ;;
-*)
- dflt="$prefix"
- ;;
-esac
-$cat <<EOM
-
-By default, $package will be installed in $dflt/bin, manual pages
-under $dflt/man, etc..., i.e. with $dflt as prefix for all
-installation directories. Typically this is something like /usr/local.
-If you wish to have binaries under /usr/bin but other parts of the
-installation under /usr/local, that's ok: you will be prompted
-separately for each of the installation directories, the prefix being
-only used to set the defaults.
-
-EOM
-fn=d~
-rp='Installation prefix to use?'
-. ./getfile
-oldprefix=''
-case "$prefix" in
-'') ;;
-*)
- case "$ans" in
- "$prefix") ;;
- *) oldprefix="$prefix";;
- esac
- ;;
-esac
-prefix="$ans"
-prefixexp="$ansexp"
-
-case "$afsroot" in
-'') afsroot=/afs ;;
-*) afsroot=$afsroot ;;
-esac
-
-: is AFS running?
-echo " "
-case "$afs" in
-$define|true) afs=true ;;
-$undef|false) afs=false ;;
-*) if test -d $afsroot; then
- afs=true
- else
- afs=false
- fi
- ;;
-esac
-if $afs; then
- echo "AFS may be running... I'll be extra cautious then..." >&4
-else
- echo "AFS does not seem to be running..." >&4
-fi
-
-: determine installation prefix for where package is to be installed.
-if $afs; then
-$cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-files will reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-
-EOM
- case "$installprefix" in
- '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installprefix";;
+ ;;
+ esac
+ ;;
esac
-else
-$cat <<EOM
-
-In some special cases, particularly when building $package for distribution,
-it is convenient to distinguish the directory in which files should be
-installed from the directory ($prefix) in which they will
-eventually reside. For most users, these two directories are the same.
-
-EOM
- case "$installprefix" in
- '') dflt=$prefix ;;
- *) dflt=$installprefix;;
+esac
+case "$uselongdouble" in
+$define)
+ echo "Long doubles selected." >&4
+ case "$longdblsize" in
+ $doublesize)
+ echo "...but long doubles are equal to doubles, not changing architecture name." >&4
+ ;;
+ *)
+ case "$archname" in
+ *-ld*) echo "...and architecture name already has -ld." >&4
+ ;;
+ *) archname="$archname-ld"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
esac
+ ;;
+esac
+case "$useperlio" in
+$define)
+ echo "Perlio selected." >&4
+ ;;
+*)
+ echo "Perlio not selected, using stdio." >&4
+ case "$archname" in
+ *-stdio*) echo "...and architecture name already has -stdio." >&4
+ ;;
+ *) archname="$archname-stdio"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+esac
+if $test -f archname.cbu; then
+ echo "Your platform has some specific hints for architecture name, using them..."
+ . ./archname.cbu
fi
-fn=d~
-rp='What installation prefix should I use for installing files?'
-. ./getfile
-installprefix="$ans"
-installprefixexp="$ansexp"
: set the prefixit variable, to compute a suitable default value
prefixit='case "$3" in
api_revision=`awk '/define[ ]+PERL_API_REVISION/ {print $3}' $rsrc/patchlevel.h`
api_version=`awk '/define[ ]+PERL_API_VERSION/ {print $3}' $rsrc/patchlevel.h`
api_subversion=`awk '/define[ ]+PERL_API_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
- perl_patchlevel=`grep ',"DEVEL[0-9][0-9]*"' $rsrc/patchlevel.h|sed 's/[^0-9]//g'`
+ perl_patchlevel=`egrep 'define PERL_PATCHNUM [0-9][0-9]|,"MAINT[0-9][0-9]*"' $rsrc/patchlevel.h|sed 's/[^0-9]//g'`
else
revision=0
patchlevel=0
perl_patchlevel=0
$echo "(You do not have patchlevel.h. Eek.)"
fi
-if $test -r $rsrc/.patch ; then
- if $test "`cat $rsrc/.patch`" -gt "$perl_patchlevel" ; then
+if $test -r $rsrc/.patch ; then
+ if $test "X$perl_patchlevel" = "X" || $test "`cat $rsrc/.patch`" -gt "$perl_patchlevel" ; then
perl_patchlevel=`cat $rsrc/.patch`
fi
fi
: confusing anyway.
installstyle=$dflt
+: determine where public executables go
+echo " "
+set dflt bin bin
+eval $prefixit
+fn=d~
+rp='Pathname where the public executables will reside?'
+. ./getfile
+if $test "X$ansexp" != "X$binexp"; then
+ installbin=''
+fi
+prefixvar=bin
+: XXX Bug? -- ignores Configure -Dinstallprefix setting.
+. ./setprefixvar
+
+case "$userelocatableinc" in
+$define|true|[yY]*) dflt='y' ;;
+*) dflt='n' ;;
+esac
+cat <<EOM
+
+Would you like to build Perl so that the installation is relocatable, so that
+library paths in @INC are determined relative to the path of the perl binary?
+This is not advised for system Perl installs, or if you need to run setid
+scripts or scripts under taint mode.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Use relocatable @INC?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set userelocatableinc
+eval $setvar
+
+: Default prefix is now "up one level from where the binaries are"
+case "$userelocatableinc" in
+$define|true|[yY]*)
+ initialinstalllocation="$binexp"
+ bin=".../"
+ binexp=".../"
+ prefix=".../.."
+ prefixexp=".../.."
+ installprefixexp=".../.."
+ ;;
+esac
+
: determine where private library files go
: Usual default is /usr/local/lib/perl5/$version.
-: Also allow things like /opt/perl/lib/$version, since
+: Also allow things like /opt/perl/lib/$version, since
: /opt/perl/lib/perl5... would be redundant.
: The default "style" setting is made in installstyle.U
case "$installstyle" in
private library directory that is accessible by everyone.
EOM
+fn=$binexp
fn=d~+
rp='Pathname where the private library files will reside?'
. ./getfile
-privlib="$ans"
-privlibexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installprivlib=`echo $privlibexp | sed "s#^$prefix#$installprefix#"`
-else
- installprivlib="$privlibexp"
-fi
+prefixvar=privlib
+. ./setprefixvar
: set the prefixup variable, to restore leading tilda escape
prefixup='case "$prefixexp" in
them with the rest of the public library files.
EOM
+fn=$binexp
fn=d+~
rp='Where do you want to put the public architecture-dependent libraries?'
. ./getfile
-archlib="$ans"
-archlibexp="$ansexp"
+prefixvar=archlib
+. ./setprefixvar
if $test X"$archlib" = X"$privlib"; then
d_archlib="$undef"
else
d_archlib="$define"
fi
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installarchlib=`echo $archlibexp | sed "s#^$prefix#$installprefix#"`
-else
- installarchlib="$archlibexp"
-fi
: see if setuid scripts can be secure
$cat <<EOM
esac
;;
esac
-set d_dosuid
-eval $setvar
+set d_dosuid
+eval $setvar
+
+: Find perl5.005 or later.
+echo "Looking for a previously installed perl5.005 or later... "
+case "$perl5" in
+'') for tdir in `echo "$binexp$path_sep$PATH" | $sed "s/$path_sep/ /g"`; do
+ : Check if this perl is recent and can load a simple module
+ if $test -x $tdir/perl$exe_ext && $tdir/perl -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
+ elif $test -x $tdir/perl5$exe_ext && $tdir/perl5 -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl5
+ break;
+ fi
+ done
+ ;;
+*) perl5="$perl5"
+ ;;
+esac
+case "$perl5" in
+'') echo "None found. That's ok.";;
+*) echo "Using $perl5." ;;
+esac
+
+$cat <<EOM
+
+After $package is installed, you may wish to install various
+add-on modules and utilities. Typically, these add-ons will
+be installed under $prefix with the rest
+of this package. However, you may wish to install such add-ons
+elsewhere under a different prefix.
+
+If you do not wish to put everything under a single prefix, that's
+ok. You will be prompted for the individual locations; this siteprefix
+is only used to suggest the defaults.
+
+The default should be fine for most people.
+
+EOM
+fn=d~+
+rp='Installation prefix to use for add-on modules and utilities?'
+: XXX Here might be another good place for an installstyle setting.
+case "$siteprefix" in
+'') dflt=$prefix ;;
+*) dflt=$siteprefix ;;
+esac
+. ./getfile
+: XXX Prefixit unit does not yet support siteprefix and vendorprefix
+oldsiteprefix=''
+case "$siteprefix" in
+'') ;;
+*) case "$ans" in
+ "$prefix") ;;
+ *) oldsiteprefix="$prefix";;
+ esac
+ ;;
+esac
+siteprefix="$ans"
+siteprefixexp="$ansexp"
+
+: determine where site specific libraries go.
+: Usual default is /usr/local/lib/perl5/site_perl/$version
+: The default "style" setting is made in installstyle.U
+: XXX No longer works with Prefixit stuff.
+prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+case "$sitelib" in
+'') case "$installstyle" in
+ *lib/perl5*) dflt=$siteprefix/lib/$package/site_$prog/$version ;;
+ *) dflt=$siteprefix/lib/site_$prog/$version ;;
+ esac
+ ;;
+*) dflt="$sitelib"
+ ;;
+esac
+$cat <<EOM
+
+The installation process will create a directory for
+site-specific extensions and modules. Most users find it convenient
+to place all site-specific files in this directory rather than in the
+main distribution directory.
+
+EOM
+fn=d~+
+rp='Pathname for the site-specific library files?'
+. ./getfile
+prefixvar=sitelib
+. ./setprefixvar
+sitelib_stem=`echo "$sitelibexp" | sed "s,/$version$,,"`
+
+: Determine list of previous versions to include in @INC
+$cat > getverlist <<EOPL
+#!$perl5 -w
+use File::Basename;
+\$api_versionstring = "$api_versionstring";
+\$version = "$version";
+\$stem = "$sitelib_stem";
+\$archname = "$archname";
+EOPL
+ $cat >> getverlist <<'EOPL'
+# Can't have leading @ because metaconfig interprets it as a command!
+;@inc_version_list=();
+# XXX Redo to do opendir/readdir?
+if (-d $stem) {
+ chdir($stem);
+ ;@candidates = glob("5.*");
+}
+else {
+ ;@candidates = ();
+}
+
+# XXX ToDo: These comparisons must be reworked when two-digit
+# subversions come along, so that 5.7.10 compares as greater than
+# 5.7.3! By that time, hope that 5.6.x is sufficiently
+# widespread that we can use the built-in version vectors rather
+# than reinventing them here. For 5.6.0, however, we must
+# assume this script will likely be run by 5.005_0x. --AD 1/2000.
+foreach $d (@candidates) {
+ if ($d lt $version) {
+ if ($d ge $api_versionstring) {
+ unshift(@inc_version_list, grep { -d } "$d/$archname", $d);
+ }
+ elsif ($d ge "5.005") {
+ unshift(@inc_version_list, grep { -d } $d);
+ }
+ }
+ else {
+ # Skip newer version. I.e. don't look in
+ # 5.7.0 if we're installing 5.6.1.
+ }
+}
+
+if (@inc_version_list) {
+ print join(' ', @inc_version_list);
+}
+else {
+ # Blank space to preserve value for next Configure run.
+ print " ";
+}
+EOPL
+chmod +x getverlist
+case "$inc_version_list" in
+'') if test -x "$perl5$exe_ext"; then
+ dflt=`$perl5 getverlist`
+ else
+ dflt='none'
+ fi
+ ;;
+$undef) dflt='none' ;;
+*) eval dflt=\"$inc_version_list\" ;;
+esac
+case "$dflt" in
+''|' ') dflt=none ;;
+esac
+case "$dflt" in
+5.005) dflt=none ;;
+esac
+$cat <<EOM
+
+In order to ease the process of upgrading, this version of perl
+can be configured to use modules built and installed with earlier
+versions of perl that were installed under $prefix. Specify here
+the list of earlier versions that this version of perl should check.
+If Configure detected no earlier versions of perl installed under
+$prefix, then the list will be empty. Answer 'none' to tell perl
+to not search earlier versions.
+
+The default should almost always be sensible, so if you're not sure,
+just accept the default.
+EOM
+
+rp='List of earlier versions to include in @INC?'
+. ./myread
+case "$ans" in
+[Nn]one|''|' '|$undef) inc_version_list=' ' ;;
+*) inc_version_list="$ans" ;;
+esac
+case "$inc_version_list" in
+''|' ')
+ inc_version_list_init='0'
+ d_inc_version_list="$undef"
+ ;;
+*) inc_version_list_init=`echo $inc_version_list |
+ $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
+ d_inc_version_list="$define"
+ ;;
+esac
+$rm -f getverlist
: see if this is a malloc.h system
: we want a real compile instead of Inhdr because some systems have a
esac
+: determine whether to use malloc wrapping
+echo " "
+case "$usemallocwrap" in
+[yY]*|true|$define) dflt='y' ;;
+[nN]*|false|$undef) dflt='n' ;;
+*) case "$usedevel" in
+ [yY]*|true|$define) dflt='y' ;;
+ *) dflt='n' ;;
+ esac
+ ;;
+esac
+rp="Do you wish to wrap malloc calls to protect against potential overflows?"
+. ./myread
+usemallocwrap="$ans"
+case "$ans" in
+y*|true)
+ usemallocwrap="$define" ;;
+*)
+ usemallocwrap="$undef" ;;
+esac
+
: determine which malloc to compile in
echo " "
case "$usemymalloc" in
esac
echo "Your system uses $freetype free(), it would seem." >&4
$rm -f malloc.[co]
-$cat <<EOM
-
-After $package is installed, you may wish to install various
-add-on modules and utilities. Typically, these add-ons will
-be installed under $prefix with the rest
-of this package. However, you may wish to install such add-ons
-elsewhere under a different prefix.
-
-If you do not wish to put everything under a single prefix, that's
-ok. You will be prompted for the individual locations; this siteprefix
-is only used to suggest the defaults.
-
-The default should be fine for most people.
-
-EOM
-fn=d~+
-rp='Installation prefix to use for add-on modules and utilities?'
-: XXX Here might be another good place for an installstyle setting.
-case "$siteprefix" in
-'') dflt=$prefix ;;
-*) dflt=$siteprefix ;;
-esac
-. ./getfile
-: XXX Prefixit unit does not yet support siteprefix and vendorprefix
-oldsiteprefix=''
-case "$siteprefix" in
-'') ;;
-*) case "$ans" in
- "$prefix") ;;
- *) oldsiteprefix="$prefix";;
- esac
- ;;
-esac
-siteprefix="$ans"
-siteprefixexp="$ansexp"
-
-: determine where site specific libraries go.
-: Usual default is /usr/local/lib/perl5/site_perl/$version
-: The default "style" setting is made in installstyle.U
-: XXX No longer works with Prefixit stuff.
-prog=`echo $package | $sed 's/-*[0-9.]*$//'`
-case "$sitelib" in
-'') case "$installstyle" in
- *lib/perl5*) dflt=$siteprefix/lib/$package/site_$prog/$version ;;
- *) dflt=$siteprefix/lib/site_$prog/$version ;;
- esac
- ;;
-*) dflt="$sitelib"
- ;;
-esac
-$cat <<EOM
-
-The installation process will create a directory for
-site-specific extensions and modules. Most users find it convenient
-to place all site-specific files in this directory rather than in the
-main distribution directory.
-
-EOM
-fn=d~+
-rp='Pathname for the site-specific library files?'
-. ./getfile
-sitelib="$ans"
-sitelibexp="$ansexp"
-sitelib_stem=`echo "$sitelibexp" | sed "s,/$version$,,"`
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitelib=`echo $sitelibexp | $sed "s#^$prefix#$installprefix#"`
-else
- installsitelib="$sitelibexp"
-fi
-
: determine where site specific architecture-dependent libraries go.
: sitelib default is /usr/local/lib/perl5/site_perl/$version
: sitearch default is /usr/local/lib/perl5/site_perl/$version/$archname
fn=d~+
rp='Pathname for the site-specific architecture-dependent library files?'
. ./getfile
-sitearch="$ans"
-sitearchexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
+prefixvar=sitearch
+. ./setprefixvar
+if $test X"$sitearch" = X"$sitelib"; then
+ d_sitearch="$undef"
else
- installsitearch="$sitearchexp"
+ d_sitearch="$define"
fi
$cat <<EOM
;;
esac
vendorlib_stem=`echo "$vendorlibexp" | sed "s,/$version$,,"`
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorlib="$vendorlibexp"
-fi
+prefixvar=vendorlib
+. ./installprefix
case "$vendorprefix" in
'') d_vendorarch="$undef"
vendorarchexp="$ansexp"
;;
esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorarch=`echo $vendorarchexp | sed "s#^$prefix#$installprefix#"`
-else
- installvendorarch="$vendorarchexp"
-fi
+prefixvar=vendorarch
+. ./installprefix
: Final catch-all directories to search
$cat <<EOM
;;
esac
-: determine where public executables go
-echo " "
-set dflt bin bin
-eval $prefixit
-fn=d~
-rp='Pathname where the public executables will reside?'
-. ./getfile
-if $test "X$ansexp" != "X$binexp"; then
- installbin=''
-fi
-bin="$ans"
-binexp="$ansexp"
-: Change installation prefix, if necessary.
-: XXX Bug? -- ignores Configure -Dinstallprefix setting.
-if $test X"$prefix" != X"$installprefix"; then
- installbin=`echo $binexp | sed "s#^$prefix#$installprefix#"`
-else
- installbin="$binexp"
-fi
-
echo " "
case "$extras" in
'') dflt='n';;
eval $prefixit
$cat <<EOM
-If you wish to install html files for programs in $spackage, indicate
+If you wish to install html files for programs in $spackage, indicate
the appropriate directory here. To skip installing html files,
answer "none".
EOM
fn=dn+~
rp="Directory for the main $spackage html pages?"
. ./getfile
-html1dir="$ans"
-html1direxp="$ansexp"
+prefixvar=html1dir
+. ./setprefixvar
: Use ' ' for none so value is preserved next time through Configure
$test X"$html1dir" = "X" && html1dir=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installhtml1dir=`echo $html1direxp | sed "s#^$prefix#$installprefix#"`
-else
- installhtml1dir="$html1direxp"
-fi
: determine where html pages for libraries and modules go
set html3dir html3dir none
eval $prefixit
$cat <<EOM
-If you wish to install html files for modules associated with $spackage,
-indicate the appropriate directory here. To skip installing html files,
-answer "none".
-EOM
-: There is no obvious default. If they have specified html1dir, then
-: try to key off that, possibly changing .../html1 into .../html3.
-case "$html3dir" in
-'') html3dir=`echo "$html1dir" | $sed 's/1$/3$/'` ;;
-*) dflt=$html3dir ;;
-esac
-fn=dn+~
-rp="Directory for the $spackage module html pages?"
-. ./getfile
-html3dir="$ans"
-html3direxp="$ansexp"
-: Use ' ' for none so value is preserved next time through Configure
-$test X"$html3dir" = "X" && html3dir=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installhtml3dir=`echo $html3direxp | sed "s#^$prefix#$installprefix#"`
-else
- installhtml3dir="$html3direxp"
-fi
-
-: Find perl5.005 or later.
-echo "Looking for a previously installed perl5.005 or later... "
-case "$perl5" in
-'') for tdir in `echo "$binexp$path_sep$PATH" | $sed "s/$path_sep/ /g"`; do
- : Check if this perl is recent and can load a simple module
- if $test -x $tdir/perl$exe_ext && $tdir/perl -Mless -e 'use 5.005;' >/dev/null 2>&1; then
- perl5=$tdir/perl
- break;
- elif $test -x $tdir/perl5$exe_ext && $tdir/perl5 -Mless -e 'use 5.005;' >/dev/null 2>&1; then
- perl5=$tdir/perl5
- break;
- fi
- done
- ;;
-*) perl5="$perl5"
- ;;
-esac
-case "$perl5" in
-'') echo "None found. That's ok.";;
-*) echo "Using $perl5." ;;
-esac
-
-: Determine list of previous versions to include in @INC
-$cat > getverlist <<EOPL
-#!$perl5 -w
-use File::Basename;
-\$api_versionstring = "$api_versionstring";
-\$version = "$version";
-\$stem = "$sitelib_stem";
-\$archname = "$archname";
-EOPL
- $cat >> getverlist <<'EOPL'
-# Can't have leading @ because metaconfig interprets it as a command!
-;@inc_version_list=();
-# XXX Redo to do opendir/readdir?
-if (-d $stem) {
- chdir($stem);
- ;@candidates = glob("5.*");
-}
-else {
- ;@candidates = ();
-}
-
-# XXX ToDo: These comparisons must be reworked when two-digit
-# subversions come along, so that 5.7.10 compares as greater than
-# 5.7.3! By that time, hope that 5.6.x is sufficiently
-# widespread that we can use the built-in version vectors rather
-# than reinventing them here. For 5.6.0, however, we must
-# assume this script will likely be run by 5.005_0x. --AD 1/2000.
-foreach $d (@candidates) {
- if ($d lt $version) {
- if ($d ge $api_versionstring) {
- unshift(@inc_version_list, grep { -d } "$d/$archname", $d);
- }
- elsif ($d ge "5.005") {
- unshift(@inc_version_list, grep { -d } $d);
- }
- }
- else {
- # Skip newer version. I.e. don't look in
- # 5.7.0 if we're installing 5.6.1.
- }
-}
-
-if (@inc_version_list) {
- print join(' ', @inc_version_list);
-}
-else {
- # Blank space to preserve value for next Configure run.
- print " ";
-}
-EOPL
-chmod +x getverlist
-case "$inc_version_list" in
-'') if test -x "$perl5$exe_ext"; then
- dflt=`$perl5 getverlist`
- else
- dflt='none'
- fi
- ;;
-$undef) dflt='none' ;;
-*) eval dflt=\"$inc_version_list\" ;;
-esac
-case "$dflt" in
-''|' ') dflt=none ;;
-esac
-case "$dflt" in
-5.005) dflt=none ;;
-esac
-$cat <<EOM
-
-In order to ease the process of upgrading, this version of perl
-can be configured to use modules built and installed with earlier
-versions of perl that were installed under $prefix. Specify here
-the list of earlier versions that this version of perl should check.
-If Configure detected no earlier versions of perl installed under
-$prefix, then the list will be empty. Answer 'none' to tell perl
-to not search earlier versions.
-
-The default should almost always be sensible, so if you're not sure,
-just accept the default.
-EOM
-
-rp='List of earlier versions to include in @INC?'
-. ./myread
-case "$ans" in
-[Nn]one|''|' ') inc_version_list=' ' ;;
-*) inc_version_list="$ans" ;;
-esac
-case "$inc_version_list" in
-''|' ')
- inc_version_list_init='0';;
-*) inc_version_list_init=`echo $inc_version_list |
- $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
- ;;
+If you wish to install html files for modules associated with $spackage,
+indicate the appropriate directory here. To skip installing html files,
+answer "none".
+EOM
+: There is no obvious default. If they have specified html1dir, then
+: try to key off that, possibly changing .../html1 into .../html3.
+case "$html3dir" in
+'') html3dir=`echo "$html1dir" | $sed 's/1$/3$/'` ;;
+*) dflt=$html3dir ;;
esac
-$rm -f getverlist
+fn=dn+~
+rp="Directory for the $spackage module html pages?"
+. ./getfile
+prefixvar=html3dir
+. ./setprefixvar
+: Use ' ' for none so value is preserved next time through Configure
+$test X"$html3dir" = "X" && html3dir=' '
: determine whether to install perl also as /usr/bin/perl
: for archive libraries. Thank you, Linux.
case "$nm_so_opt" in
'') case "$myuname" in
- *linux*)
+ *linux*|gnu*)
if $nm --help | $grep 'dynamic' > /dev/null 2>&1; then
nm_so_opt='--dynamic'
fi
: is a C symbol defined?
csym='tlook=$1;
case "$3" in
--v) tf=libc.tmp; tc=""; tdc="";;
--a) tf=libc.tmp; tc="[0]"; tdc="[]";;
-*) tlook="^$1\$"; tf=libc.list; tc="()"; tdc="()";;
+-v) tf=libc.tmp; tdc="";;
+-a) tf=libc.tmp; tdc="[]";;
+*) tlook="^$1\$"; tf=libc.list; tdc="()";;
esac;
tx=yes;
case "$reuseval-$4" in
case "$tx" in
yes)
tval=false;
- if $test "$runnm" = "true" && $contains $tlook $tf >/dev/null 2>&1; then
- tval=true;
- else
- echo "int main() { extern short $1$tdc; printf(\"%hd\", $1$tc); }" > t.c;
- if $cc -o t $optimize $ccflags $ldflags t.c $libs >/dev/null 2>&1; then
+ if $test "$runnm" = true; then
+ if $contains $tlook $tf >/dev/null 2>&1; then
tval=true;
+ elif $test "$mistrustnm" = compile -o "$mistrustnm" = run; then
+ echo "void *(*(p()))$tdc { extern void *$1$tdc; return &$1; } int main() { if(p()) return(0); else return(1); }"> try.c;
+ $cc -o try $optimize $ccflags $ldflags try.c >/dev/null 2>&1 $libs && tval=true;
+ $test "$mistrustnm" = run -a -x try && { $run ./try$_exe >/dev/null 2>&1 || tval=false; };
+ $rm -f try$_exe try.c core core.* try.core;
fi;
- $rm -f t t.c;
+ else
+ echo "void *(*(p()))$tdc { extern void *$1$tdc; return &$1; } int main() { if(p()) return(0); else return(1); }"> try.c;
+ $cc -o try $optimize $ccflags $ldflags try.c $libs >/dev/null 2>&1 && tval=true;
+ $rm -f try$_exe try.c;
fi;
;;
*)
'') dflt="$dflt +vnocompatwarnings" ;;
esac
;;
- linux|irix*) dflt='-shared' ;;
+ linux|irix*|gnu*) dflt='-shared' ;;
next) dflt='none' ;;
solaris) dflt='-G' ;;
sunos) dflt='-assert nodefinitions' ;;
EOM
case "$ccdlflags" in
'') case "$osname" in
- hpux) dflt='-Wl,-E' ;;
- linux) dflt='-rdynamic' ;;
- next) dflt='none' ;;
- sunos) dflt='none' ;;
- *) dflt='none' ;;
+ linux|hpux|gnu*) dflt='-Wl,-E' ;;
+ next|sunos) dflt='none' ;;
+ *) dflt='none' ;;
esac ;;
' ') dflt='none' ;;
*) dflt="$ccdlflags" ;;
your system supports dynamic loading, it is probably possible to build
a shared libperl.$so. If you will have more than one executable linked
to libperl.$so, this will significantly reduce the size of each
-executable, but it may have a noticeable affect on performance. The
+executable, but it may have a noticeable effect on performance. The
default is probably sensible for your system.
$also
dflt=libperl.5.$so
# XXX How handle the --version stuff for MAB?
;;
- linux*) # ld won't link with a bare -lperl otherwise.
+ linux*|gnu*) # ld won't link with a bare -lperl otherwise.
dflt=libperl.$so
;;
cygwin*) # ld links against an importlib
solaris)
xxx="-R $shrpdir"
;;
- freebsd|netbsd|openbsd)
+ freebsd|netbsd|openbsd|interix|dragonfly)
xxx="-Wl,-R$shrpdir"
;;
- bsdos|linux|irix*|dec_osf)
+ bsdos|linux|irix*|dec_osf|gnu*)
xxx="-Wl,-rpath,$shrpdir"
;;
next)
if $test "X$man1direxp" != "X$ansexp"; then
installman1dir=''
fi
-man1dir="$ans"
-man1direxp="$ansexp"
+prefixvar=man1dir
+. ./setprefixvar
+
case "$man1dir" in
'') man1dir=' '
installman1dir='';;
esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installman1dir=`echo $man1direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installman1dir="$man1direxp"
-fi
-
: What suffix to use on installed man pages
case "$man1dir" in
case "$d_flexfnam" in
undef)
$cat <<'EOM'
-However, your system can't handle the long file names like File::Basename.3.
+However, your system can't handle the long file names like File::Basename.3.
EOM
case "$man3dir" in
'') man3dir="none";;
cat <<EOM >&4
WARNING: Previous versions of perl installed man3 pages into
-$privlib/man/man3. This version will suggest a
-new default of $dflt.
+$privlib/man/man3. This version will suggest a
+new default of $dflt.
EOM
tdflt=$dflt
dflt='n'
fn=dn+~
rp="Where do the $package library man pages (source) go?"
. ./getfile
-man3dir="$ans"
-man3direxp="$ansexp"
+prefixvar=man3dir
+. ./setprefixvar
+
case "$man3dir" in
'') man3dir=' '
installman3dir='';;
esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installman3dir=`echo $man3direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installman3dir="$man3direxp"
-fi
-
: What suffix to use on installed man pages
case "$man3dir" in
' ')
;;
esac
$cat <<EOM
-
+
Some installations have a separate directory just for executable scripts so
that they can mount it across multiple architectures but keep the scripts in
one spot. You might, for example, have a subdirectory of /usr/share for this.
Or you might just lump your scripts in with all your other executables.
-
+
EOM
fn=d~
rp='Where do you keep publicly executable scripts?'
if $test "X$ansexp" != "X$scriptdirexp"; then
installscript=''
fi
-scriptdir="$ans"
-scriptdirexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installscript=`echo $scriptdirexp | sed "s#^$prefix#$installprefix#"`
-else
- installscript="$scriptdirexp"
-fi
+installscriptdir=''
+prefixvar=scriptdir
+. ./setprefixvar
+: A little fix up for an irregularly named variable.
+installscript="$installscriptdir"
: determine where add-on public executables go
case "$sitebin" in
fn=d~
rp='Pathname where the add-on public executables should be installed?'
. ./getfile
-sitebin="$ans"
-sitebinexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitebin=`echo $sitebinexp | sed "s#^$prefix#$installprefix#"`
-else
- installsitebin="$sitebinexp"
-fi
+prefixvar=sitebin
+. ./setprefixvar
: determine where add-on html pages go
-: There is no standard location, so try to copy the previously-selected
+: There is no standard location, so try to copy the previously-selected
: directory structure for the core html pages.
-case "$sitehtml1" in
-'') dflt=`echo "$html1dir" | $sed "s#^$prefix#$siteprefix#"` ;;
-*) dflt=$sitehtml1 ;;
+case "$sitehtml1dir" in
+'') dflt=`echo "$html1dir" | $sed "s#^$prefix#$siteprefix#"` ;;
+*) dflt=$sitehtml1dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=dn+~
rp='Pathname where the site-specific html pages should be installed?'
. ./getfile
-sitehtml1="$ans"
-sitehtml1exp="$ansexp"
-: Use ' ' for none so value is preserved next time through Configure
-$test X"$sitehtml1" = "X" && sitehtml1=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitehtml1=`echo "$sitehtml1exp" | $sed "s#^$prefix#$installprefix#"`
-else
- installsitehtml1="$sitehtml1exp"
-fi
+prefixvar=sitehtml1dir
+. ./setprefixvar
: determine where add-on library html pages go
: There is no standard location, so try to copy the previously-selected
: directory structure for the core html pages.
-case "$sitehtml3" in
-'') dflt=`echo "$html3dir" | $sed "s#^$prefix#$siteprefix#"` ;;
-*) dflt=$sitehtml3 ;;
+case "$sitehtml3dir" in
+'') dflt=`echo "$html3dir" | $sed "s#^$prefix#$siteprefix#"` ;;
+*) dflt=$sitehtml3dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=dn+~
rp='Pathname where the site-specific library html pages should be installed?'
. ./getfile
-sitehtml3="$ans"
-sitehtml3exp="$ansexp"
-: Use ' ' for none so value is preserved next time through Configure
-$test X"$sitehtml3" = "X" && sitehtml3=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitehtml3=`echo "$sitehtml3exp" | $sed "s#^$prefix#$installprefix#"`
-else
- installsitehtml3="$sitehtml3exp"
-fi
+prefixvar=sitehtml3dir
+. ./setprefixvar
: determine where add-on manual pages go
-case "$siteman1" in
-'') dflt=`echo "$man1dir" | $sed "s#^$prefix#$siteprefix#"` ;;
-*) dflt=$siteman1 ;;
+case "$siteman1dir" in
+'') dflt=`echo $man1dir | $sed "s#^$prefix#$siteprefix#"` ;;
+*) dflt=$siteman1dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=dn+~
rp='Pathname where the site-specific manual pages should be installed?'
. ./getfile
-siteman1="$ans"
-siteman1exp="$ansexp"
-: Use ' ' for none so value is preserved next time through Configure
-$test X"$siteman1" = "X" && siteman1=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsiteman1=`echo "$siteman1exp" | $sed "s#^$prefix#$installprefix#"`
-else
- installsiteman1="$siteman1exp"
-fi
+prefixvar=siteman1dir
+. ./setprefixvar
: determine where add-on library man pages go
-case "$siteman3" in
-'') dflt=`echo "$man3dir" | $sed "s#^$prefix#$siteprefix#"` ;;
-*) dflt=$siteman3 ;;
+case "$siteman3dir" in
+'') dflt=`echo $man3dir | $sed "s#^$prefix#$siteprefix#"` ;;
+*) dflt=$siteman3dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=dn+~
rp='Pathname where the site-specific library manual pages should be installed?'
. ./getfile
-siteman3="$ans"
-siteman3exp="$ansexp"
-: Use ' ' for none so value is preserved next time through Configure
-$test X"$siteman3" = "X" && siteman3=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsiteman3=`echo "$siteman3exp" | $sed "s#^$prefix#$installprefix#"`
-else
- installsiteman3="$siteman3exp"
-fi
+prefixvar=siteman3dir
+. ./setprefixvar
: determine where add-on public executable scripts go
case "$sitescript" in
fn=d~+
rp='Pathname where add-on public executable scripts should be installed?'
. ./getfile
-sitescript="$ans"
-sitescriptexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitescript=`echo $sitescriptexp | sed "s#^$prefix#$installprefix#"`
-else
- installsitescript="$sitescriptexp"
-fi
+prefixvar=sitescript
+. ./setprefixvar
case "$usefaststdio" in
$define|true|[yY]*|'')
esac
set uselargefiles
eval $setvar
-case "$uselargefiles" in
-"$define")
: Look for a hint-file generated 'call-back-unit'. If the
: user has specified that a large files perl is to be built,
: we may need to set or change some other defaults.
+if $test -f uselargefiles.cbu; then
+ echo "Your platform has some specific hints regarding large file builds, using them..."
+ . ./uselargefiles.cbu
+fi
+case "$uselargefiles" in
+"$define")
if $test -f uselargefiles.cbu; then
- echo "Your platform has some specific hints for large file builds, using them..."
- . ./uselargefiles.cbu
echo " "
echo "Rechecking to see how big your file offsets are..." >&4
$cat >try.c <<EOCP
vendorbinexp="$ansexp"
;;
esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorbin=`echo $vendorbinexp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorbin="$vendorbinexp"
-fi
+prefixvar=vendorbin
+. ./installprefix
case "$vendorprefix" in
-'') vendorhtml1=''
- vendorhtml1exp=''
+'') vendorhtml1dir=''
+ vendorhtml1direxp=''
;;
*) : determine where vendor-supplied html pages go.
: There is no standard location, so try to copy the previously-selected
: directory structure for the core html pages.
: XXX Better default suggestions would be welcome.
- case "$vendorhtml1" in
+ case "$vendorhtml1dir" in
'') dflt=`echo "$html1dir" | $sed "s#^$prefix#$vendorprefix#"` ;;
- *) dflt=$vendorhtml1 ;;
+ *) dflt=$vendorhtml1dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=dn+~
rp='Pathname for the vendor-supplied html pages?'
. ./getfile
- vendorhtml1="$ans"
- vendorhtml1exp="$ansexp"
+ vendorhtml1dir="$ans"
+ vendorhtml1direxp="$ansexp"
;;
esac
: Use ' ' for none so value is preserved next time through Configure
-$test X"$vendorhtml1" = "X" && vendorhtml1=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorhtml1=`echo $vendorhtml1exp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorhtml1="$vendorhtml1exp"
-fi
+$test X"$vendorhtml1dir" = "X" && vendorhtml1dir=' '
+prefixvar=vendorhtml1dir
+. ./installprefix
case "$vendorprefix" in
-'') vendorhtml3=''
- vendorhtml3exp=''
+'') vendorhtml3dir=''
+ vendorhtml3direxp=''
;;
*) : determine where vendor-supplied module html pages go.
: There is no standard location, so try to copy the previously-selected
: directory structure for the core html pages.
: XXX Better default suggestions would be welcome.
- case "$vendorhtml3" in
+ case "$vendorhtml3dir" in
'') dflt=`echo "$html3dir" | $sed "s#^$prefix#$vendorprefix#"` ;;
- *) dflt=$vendorhtml3 ;;
+ *) dflt=$vendorhtml3dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=dn+~
rp='Pathname for the vendor-supplied html pages?'
. ./getfile
- vendorhtml3="$ans"
- vendorhtml3exp="$ansexp"
+ vendorhtml3dir="$ans"
+ vendorhtml3direxp="$ansexp"
;;
esac
: Use ' ' for none so value is preserved next time through Configure
-$test X"$vendorhtml3" = "X" && vendorhtml3=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorhtml3=`echo $vendorhtml3exp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorhtml3="$vendorhtml3exp"
-fi
+$test X"$vendorhtml3dir" = "X" && vendorhtml3dir=' '
+prefixvar=vendorhtml3dir
+. ./installprefix
case "$vendorprefix" in
-'') vendorman1=''
- vendorman1exp=''
+'') vendorman1dir=''
+ vendorman1direxp=''
;;
*) : determine where vendor-supplied manual pages go.
- case "$vendorman1" in
+ case "$vendorman1dir" in
'') dflt=`echo "$man1dir" | $sed "s#^$prefix#$vendorprefix#"` ;;
- *) dflt=$vendorman1 ;;
+ *) dflt=$vendorman1dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=nd~+
rp='Pathname for the vendor-supplied manual section 1 pages?'
. ./getfile
- vendorman1="$ans"
- vendorman1exp="$ansexp"
+ vendorman1dir="$ans"
+ vendorman1direxp="$ansexp"
;;
esac
: Use ' ' for none so value is preserved next time through Configure
-$test X"$vendorman1" = "X" && vendorman1=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorman1=`echo "$vendorman1exp" | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorman1="$vendorman1exp"
-fi
+$test X"$vendorman1dir" = "X" && vendorman1dir=' '
+prefixvar=vendorman1dir
+. ./installprefix
case "$vendorprefix" in
-'') vendorman3=''
- vendorman3exp=''
+'') vendorman3dir=''
+ vendorman3direxp=''
;;
*) : determine where vendor-supplied module manual pages go.
- case "$vendorman3" in
+ case "$vendorman3dir" in
'') dflt=`echo "$man3dir" | $sed "s#^$prefix#$vendorprefix#"` ;;
- *) dflt=$vendorman3 ;;
+ *) dflt=$vendorman3dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=nd~+
rp='Pathname for the vendor-supplied manual section 3 pages?'
. ./getfile
- vendorman3="$ans"
- vendorman3exp="$ansexp"
+ vendorman3dir="$ans"
+ vendorman3direxp="$ansexp"
;;
esac
: Use ' ' for none so value is preserved next time through Configure
-$test X"$vendorman3" = "X" && vendorman3=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorman3=`echo "$vendorman3exp" | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorman3="$vendorman3exp"
-fi
+$test X"$vendorman3dir" = "X" && vendorman3dir=' '
+prefixvar=vendorman3dir
+. ./installprefix
case "$vendorprefix" in
'') d_vendorscript="$undef"
esac
$cat <<EOM
-The installation process will create a directory for
+The installation process will create a directory for
vendor-supplied scripts.
EOM
vendorscriptexp="$ansexp"
;;
esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorscript=`echo $vendorscriptexp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorscript="$vendorscriptexp"
-fi
+prefixvar=vendorscript
+. ./installprefix
: see if qgcvt exists
set qgcvt d_qgcvt
set atoll d_atoll
eval $inlibc
-: Look for GNU-cc style attribute checking
+: Look for GCC-style attribute format
+case "$d_attribute_format" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((format)) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+void my_special_printf(char* pat,...) __attribute__((__format__(__printf__,1,2)));
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((format))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((format))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_format" ;;
+esac
+set d_attribute_format
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute malloc
+case "$d_attribute_malloc" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((malloc)) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+char *go_get_some_memory( int how_many_bytes ) __attribute__((malloc));
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((malloc))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((malloc))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_malloc" ;;
+esac
+set d_attribute_malloc
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute nonnull
+case "$d_attribute_nonnull" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((nonnull(1))) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+void do_something (char *some_pointer,...) __attribute__((nonnull(1)));
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((nonnull))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((nonnull))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_nonnull" ;;
+esac
+set d_attribute_nonnull
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute noreturn
+case "$d_attribute_noreturn" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((noreturn)) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+void fall_over_dead( void ) __attribute__((noreturn));
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((noreturn))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((noreturn))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_noreturn" ;;
+esac
+set d_attribute_noreturn
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute pure
+case "$d_attribute_pure" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((pure)) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+int square( int n ) __attribute__((pure));
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((pure))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((pure))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_pure" ;;
+esac
+set d_attribute_pure
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute unused
+case "$d_attribute_unused" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((unused)) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+int do_something( int dummy __attribute__((unused)), int n );
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((unused))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((unused))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_unused" ;;
+esac
+set d_attribute_unused
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute warn_unused_result
+case "$d_attribute_warn_unused_result" in
+'')
echo " "
-echo "Checking whether your compiler can handle __attribute__ ..." >&4
+echo "Checking whether your compiler can handle __attribute__((warn_unused_result)) ..." >&4
$cat >attrib.c <<'EOCP'
#include <stdio.h>
-void croak (char* pat,...) __attribute__((__format__(__printf__,1,2),noreturn));
+int I_will_not_be_ignored(void) __attribute__((warn_unused_result));
EOCP
if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
if $contains 'warning' attrib.out >/dev/null 2>&1; then
- echo "Your C compiler doesn't fully support __attribute__."
+ echo "Your C compiler doesn't support __attribute__((warn_unused_result))."
val="$undef"
else
- echo "Your C compiler supports __attribute__."
+ echo "Your C compiler supports __attribute__((warn_unused_result))."
val="$define"
fi
else
echo "Your C compiler doesn't seem to understand __attribute__ at all."
val="$undef"
fi
-set d_attribut
+;;
+*) val="$d_attribute_warn_unused_result" ;;
+esac
+set d_attribute_warn_unused_result
eval $setvar
$rm -f attrib*
set d_bsdsetpgrp
eval $setvar
$rm -f try try.*
+: Look for GCC-style __builtin_choose_expr
+case "$d_builtin_choose_expr" in
+'')
+ echo " "
+ echo "Checking whether your compiler can handle __builtin_choose_expr ..." >&4
+ $cat >try.c <<'EOCP'
+#include <assert.h>
+#include <stdlib.h>
+#include <stdio.h>
+
+#define SYRINX(x) __builtin_choose_expr( x, (1056*2), (103*50) )
+
+int main(void) {
+ assert( SYRINX(1) == 2112 );
+ assert( SYRINX(1) != 5150 );
+ assert( SYRINX(0) == 5150 );
+ assert( SYRINX(0) != 2112 );
+ puts( "All good!" );
+ exit(0);
+}
+
+EOCP
+ set try
+ if eval $compile; then
+ echo "Your C compiler supports __builtin_choose_expr."
+ val="$define"
+ else
+ echo "Your C compiler doesn't seem to understand __builtin_choose_expr."
+ val="$undef"
+ fi
+;;
+*) val="$d_builtin_choose_expr" ;;
+esac
+
+set d_builtin_choose_expr
+eval $setvar
+$rm -f try.* try core core.try.*
+
+: Look for GCC-style __builtin_expect
+case "$d_builtin_expect" in
+'')
+ echo " "
+ echo "Checking whether your compiler can handle __builtin_expect ..." >&4
+ $cat >builtin.c <<'EOCP'
+int main(void) {
+ int n = 50;
+ if ( __builtin_expect(n, 0) ) n = 1;
+}
+EOCP
+ set try
+ if eval $compile; then
+ echo "Your C compiler supports __builtin_choose_expr."
+ val="$define"
+ else
+ echo "Your C compiler doesn't seem to understand __builtin_choose_expr."
+ val="$undef"
+ fi
+ ;;
+*) val="$d_builtin_expect" ;;
+esac
+
+set d_builtin_expect
+eval $setvar
+$rm -f try.* try core core.try.*
+
: see if bzero exists
set bzero d_bzero
eval $inlibc
i32 = ($xxx) g;
/* x86 processors will probably give 0x8000 0000, which is a
- sign change. We don't want that. We want to mimic SPARC
+ sign change. We don't want that. We want to mimic SPARC
behavior here, which is to preserve the sign and give
back 0x7fff ffff.
*/
set class d_class
eval $inlibc
+: see if clearenv exists
+set clearenv d_clearenv
+eval $inlibc
+
hasstruct='varname=$1; struct=$2; shift; shift;
while $test $# -ge 2; do
case "$1" in
exit(1);
}
EOM
+val=$undef
set dirfd
if eval $compile; then
val="$define"
8) echo "(Your long is 64 bits, so you could use ftell.)" ;;
esac
+d_futimes="$undef"
+: check for a working futimes
+echo " "
+echo "Checking for a working futimes()" >&4
+$cat >try.c <<EOCP
+#include <stdio.h>
+#include <sys/time.h>
+#include <errno.h>
+#include <fcntl.h>
+
+int main ()
+{
+ int fd, rv;
+ fd = open ("try.c", O_RDWR);
+ if (-1 == fd) exit (1);
+ rv = futimes (fd, NULL);
+ exit (rv == -1 ? errno : 0);
+}
+EOCP
+set try
+if eval $compile; then
+ `$run ./try`
+ rc=$?
+ case "$rc" in
+ 0) echo "Yes, it does" >&4
+ d_futimes="$define"
+ ;;
+ *) echo "No, it has futimes, but it isn't working ($rc) (probably harmless)\n" >&4
+ ;;
+ esac
+else
+ echo "No, it does not (probably harmless)\n" >&4
+fi
+$rm -f try.* try core core.try.*
+
: see if getcwd exists
set getcwd d_getcwd
eval $inlibc
set d_ldbl_dig
eval $setvar
+: see if this is a math.h system
+set math.h i_math
+eval $inhdr
+
+d_libm_lib_version="$undef"
+case $i_math in
+ $define)
+ : check to see if math.h defines _LIB_VERSION
+ echo " "
+ echo "Checking to see if your libm supports _LIB_VERSION..." >&4
+ $cat >try.c <<EOCP
+#include <unistd.h>
+#include <math.h>
+int main (int argc, char *argv[])
+{
+ printf ("%d\n", _LIB_VERSION);
+ return (0);
+ } /* main */
+EOCP
+ set try
+ if eval $compile; then
+ foo=`$run ./try`
+ echo "Yes, it does ($foo)" >&4
+ d_libm_lib_version="$define"
+ else
+ echo "No, it does not (probably harmless)\n" >&4
+ fi
+ $rm -f try.* try core core.try.*
+ ;;
+
+ esac
+
: see if link exists
set link d_link
eval $inlibc
set madvise d_madvise
eval $inlibc
+: see if malloc_size exists
+set malloc_size d_malloc_size
+eval $inlibc
+
+: see if malloc_size_good exists
+set malloc_good_size d_malloc_good_size
+eval $inlibc
+
: see if mblen exists
set mblen d_mblen
eval $inlibc
: see if prototype for modfl is available
echo " "
-set d_modflproto modfl math.h
+set d_modflproto modfl $i_math math.h
eval $hasproto
d_modfl_pow32_bug="$undef"
set munmap d_munmap
eval $inlibc
-: see if nanosleep exists
-set nanosleep d_nanosleep
-eval $inlibc
-
: see if nice exists
set nice d_nice
eval $inlibc
$rm -f try.* try
+$echo "Checking whether NV 0.0 is all bits zero in memory..." >&4
+: volatile so that the compiler has to store it out to memory.
+if test X"$d_volatile" = X"$define"; then
+ volatile=volatile
+fi
+$cat <<EOP >try.c
+#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+#$i_string I_STRING
+#ifdef I_STRING
+# include <string.h>
+#else
+# include <strings.h>
+#endif
+#include <sys/types.h>
+#include <signal.h>
+#ifdef SIGFPE
+$volatile int bletched = 0;
+$signal_t blech(s) int s; { bletched = 1; }
+#endif
+
+int checkit($nvtype d, char *where) {
+ unsigned char *p = (char *)&d;
+ unsigned char *end = p + sizeof(d);
+ int fail = 0;
+
+ while (p < end)
+ fail += *p++;
+
+ if (!fail)
+ return 0;
+
+ p = (char *)&d;
+ printf("No - %s: 0x", where);
+ while (p < end)
+ printf ("%02X", *p++);
+ printf("\n");
+ return 1;
+}
+
+int main(int argc, char **argv) {
+ $nvtype d = 0.0;
+ int fail = 0;
+ fail += checkit(d, "0.0");
+
+ /* The compiler shouldn't be assuming that bletched is 0 */
+ d = bletched;
+
+ fail += checkit(d, "bleched");
+
+#ifdef SIGFPE
+ signal(SIGFPE, blech);
+#endif
+
+ /* Paranoia - the compiler should have no way of knowing that ANSI says
+ that argv[argc] will always be NULL. Actually, if it did assume this it
+ would be buggy, as this is C and main() can be called from elsewhere in
+ the program. */
+ d = argv[argc] ? 1 : 0;
+
+ if (d) {
+ printf("Odd argv[argc]=%p, d=%g\n", argv[argc], d);
+ }
+
+ fail += checkit(d, "ternary");
+
+ memset(&d, sizeof(d), argv[argc] ? 1 : 0);
+
+ if (d != 0.0) {
+ printf("No - memset doesn't give 0.0\n");
+ /* This might just blow up: */
+ printf("(gives %g)\n", d);
+ return 1;
+ }
+
+#ifdef SIGFPE
+ if (bletched) {
+ printf("No - something bleched\n");
+ return 1;
+ }
+#endif
+ if (fail) {
+ printf("No - %d fail(s)\n", fail);
+ return 1;
+ }
+ printf("Yes\n");
+ return 0;
+}
+EOP
+set try
+
+d_nv_zero_is_allbits_zero="$undef"
+if eval $compile; then
+ xxx="`$run ./try`"
+ case "$?" in
+ 0)
+ case "$xxx" in
+ Yes) cat >&4 <<EOM
+0.0 is represented as all bits zero in memory
+EOM
+ d_nv_zero_is_allbits_zero="$define"
+ ;;
+ *) cat >&4 <<EOM
+0.0 is not represented as all bits zero in memory
+EOM
+ d_nv_zero_is_allbits_zero="$undef"
+ ;;
+ esac
+ ;;
+ *) cat >&4 <<EOM
+0.0 is not represented as all bits zero in memory
+EOM
+ d_nv_zero_is_allbits_zero="$undef"
+ ;;
+ esac
+fi
+
+$rm -f try.* try
+
: check for off64_t
echo " "
set d_pthread_atfork
eval $setvar
+: see if pthread_attr_setscope exists
+set pthread_attr_setscope d_pthread_attr_setscope
+eval $inlibc
+
: see whether the various POSIXish _yields exist
$cat >try.c <<EOP
echo "You do not have union semun in <sys/sem.h>." >&4
val="$undef"
fi
-$rm -f try try.c try.h
+$rm -f try try.c
set d_union_semun
eval $setvar
: see how to do semctl IPC_STAT
case "$d_sem" in
$define)
- : see whether semctl IPC_STAT can use union semun
echo " "
$cat > try.h <<END
#ifndef S_IRUSR
# define S_IRWXO (S_IROTH|S_IWOTH|S_IXOTH)
#endif
END
-
- $cat > try.c <<END
+ : see whether semctl IPC_STAT can use union semun
+ case "$d_semctl_semun" in
+ '')
+ val="$undef"
+ $cat > try.c <<END
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/sem.h>
printf("semctl IPC_STAT failed: errno = %d\n", errno);
# ifdef IPC_RMID
if (semctl(sem, 0, IPC_RMID, arg) != 0)
-# endif /* IPC_RMID */
+# endif /* IPC_RMID */
printf("semctl IPC_RMID failed: errno = %d\n", errno);
} else
#endif /* IPC_PRIVATE && ... */
return 0;
}
END
- val="$undef"
- set try
- if eval $compile; then
- xxx=`$run ./try`
- case "$xxx" in
- semun) val="$define" ;;
- esac
- fi
- $rm -f try try.c
- set d_semctl_semun
- eval $setvar
+ set try
+ if eval $compile; then
+ xxx=`$run ./try`
+ case "$xxx" in
+ semun) val="$define" ;;
+ esac
+ fi
+ $rm -f try try.c
+ set d_semctl_semun
+ eval $setvar
+ ;;
+ esac
case "$d_semctl_semun" in
$define)
echo "You can use union semun for semctl IPC_STAT." >&4
esac
: see whether semctl IPC_STAT can use struct semid_ds pointer
- $cat > try.c <<'END'
+ case "$d_semctl_semid_ds" in
+ '')
+ val="$undef"
+ $cat > try.c <<'END'
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/sem.h>
return 0;
}
END
- val="$undef"
- set try
- if eval $compile; then
- xxx=`$run ./try`
- case "$xxx" in
- semid_ds) val="$define" ;;
- esac
- fi
- $rm -f try try.c
- set d_semctl_semid_ds
- eval $setvar
+ set try
+ if eval $compile; then
+ xxx=`$run ./try`
+ case "$xxx" in
+ semid_ds) val="$define" ;;
+ esac
+ fi
+ $rm -f try try.c
+ set d_semctl_semid_ds
+ eval $setvar
+ ;;
+ esac
case "$d_semctl_semid_ds" in
$define)
echo "You can $also use struct semid_ds* for semctl IPC_STAT." >&4
eval $setvar
$rm -f try.c try
+: see if snprintf exists
+set snprintf d_snprintf
+eval $inlibc
+
+: see if vsnprintf exists
+set vsnprintf d_vsnprintf
+eval $inlibc
+
+case "$d_snprintf-$d_vsnprintf" in
+"$define-$define")
+ $cat <<EOM
+Checking whether your snprintf() and vsnprintf() work okay...
+EOM
+ $cat >try.c <<'EOCP'
+/* v?snprintf testing logic courtesy of Russ Allbery.
+ * According to C99:
+ * - if the buffer is too short it still must be \0-terminated
+ * - if the buffer is too short the potentially required length
+ * must be returned and not -1
+ * - if the buffer is NULL the potentially required length
+ * must be returned and not -1 or core dump
+ */
+#include <stdio.h>
+#include <stdarg.h>
+
+char buf[2];
+
+int test (char *format, ...)
+{
+ va_list args;
+ int count;
+
+ va_start (args, format);
+ count = vsnprintf (buf, sizeof buf, format, args);
+ va_end (args);
+ return count;
+}
+
+int main ()
+{
+ return ((test ("%s", "abcd") == 4 && buf[0] == 'a' && buf[1] == '\0'
+ && snprintf (NULL, 0, "%s", "abcd") == 4) ? 0 : 1);
+}
+EOCP
+ set try
+ if eval $compile; then
+ `$run ./try`
+ case "$?" in
+ 0) echo "Your snprintf() and vsnprintf() seem to be working okay." ;;
+ *) cat <<EOM >&4
+Your snprintf() and snprintf() don't seem to be working okay.
+EOM
+ d_snprintf="$undef"
+ d_vsnprintf="$undef"
+ ;;
+ esac
+ else
+ echo "(I can't seem to compile the test program--assuming they don't)"
+ d_snprintf="$undef"
+ d_vsnprintf="$undef"
+ fi
+ $rm -f try.* try core core.try.*
+ ;;
+esac
+
: see if sockatmark exists
set sockatmark d_sockatmark
eval $inlibc
set socks5_init d_socks5_init
eval $inlibc
+: see if sprintf returns the length of the string in the buffer as per ANSI
+$echo "Checking whether sprintf returns the length of the string..." >&4
+$cat <<EOP >try.c
+#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+#$i_string I_STRING
+#ifdef I_STRING
+# include <string.h>
+#else
+# include <strings.h>
+#endif
+#$i_math I_MATH
+#ifdef I_MATH
+#include <math.h>
+#endif
+
+char buffer[256];
+
+int check (size_t expect, int test) {
+ size_t got = strlen(buffer);
+ if (expect == got)
+ return 0;
+
+ printf("expected %ld, got %ld in test %d '%s'\n", (long) expect, (long) got,
+ test, buffer);
+ exit (test);
+}
+
+int main(int argc, char **argv) {
+ int test = 0;
+
+ check(sprintf(buffer, ""), ++test);
+ check(sprintf(buffer, "%s %s", "perl", "rules"), ++test);
+ check(sprintf(buffer, "I like %g", atan2(0,-1)), ++test);
+
+ return 0;
+}
+EOP
+set try
+
+d_sprintf_returns_strlen="$undef"
+if eval $compile; then
+ xxx="`$run ./try`"
+ case "$?" in
+ 0) cat >&4 <<EOM
+sprintf returns the length of the string (as ANSI says it should)
+EOM
+ d_sprintf_returns_strlen="$define"
+ ;;
+ *) cat >&4 <<EOM
+sprintf does not return the length of the string (how old is this system?)
+EOM
+ d_sprintf_returns_strlen="$undef"
+ ;;
+ esac
+fi
+
+$rm -f try.* try
+
: see if srand48_r exists
set srand48_r d_srand48_r
eval $inlibc
set strftime d_strftime
eval $inlibc
+: see if strlcat exists
+set strlcat d_strlcat
+eval $inlibc
+
+: see if strlcpy exists
+set strlcpy d_strlcpy
+eval $inlibc
+
: see if strtod exists
set strtod d_strtod
eval $inlibc
buf[1] = 0;
buf[2] = 0;
buf[3] = 1;
+ buf[4] = 0;
buf[5] = 0;
buf[6] = 0;
- buf[7] = 0;
- buf[8] = 1;
+ buf[7] = 1;
for (i = 0; i < 4; i++) {
up = (U32*)(buf + i);
set unordered d_unordered
eval $inlibc
+: see if unsetenv exists
+set unsetenv d_unsetenv
+eval $inlibc
+
: see if usleep exists
set usleep d_usleep
eval $inlibc
*) groupstype="$gidtype";;
esac
+
+case "$mad" in
+$define|true|[yY]*) dflt='y' ;;
+*) dflt='n' ;;
+esac
+cat <<EOM
+
+Would you like to build with Misc Attribute Decoration? This is development
+work leading to a Perl 5 to Perl 6 convertor, which imposes a space and speed
+overhead on the interpreter.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Build Perl with MAD?'
+. ./myread
+case "$ans" in
+y|Y) val="$define"
+ madlyh='madly.h madly.act madly.tab'
+ madlysrc='madly.c'
+ madlyobj="madly$_o" ;;
+*) val="$undef"
+ madlyh=''
+ madlysrc=''
+ madlyobj='' ;;
+esac
+set mad
+eval $setvar
+
echo " "
echo "Checking if your $make program sets \$(MAKE)..." >&4
case "$make_set_make" in
set pid_t pidtype int stdio.h sys/types.h
eval $typedef_ask
-: Find earliest binary compatible site_perl subdirectory perl can use.
-xs_apiversion=$version # The current site_perl version.
-: Find earliest pure perl site_perl subdirectory perl can use.
-: The versioned directories started at 5.005.
-pm_apiversion='5.005'
-
: see if ar generates random libraries by itself
echo " "
echo "Checking how to generate random libraries on your machine..." >&4
$run ./foobar >/dev/null 2>&1; then
echo "$ar appears to generate random libraries itself."
orderlib=false
- ranlib=":"
+ if [ "X$ranlib" = "X" ]; then
+ ranlib=":"
+ fi
+elif $ar s bar$_a >/dev/null 2>&1 &&
+ $cc -o foobar $ccflags $ldflags foo$_o bar$_a $libs > /dev/null 2>&1 &&
+ $run ./foobar >/dev/null 2>&1; then
+ echo "a table of contents needs to be added with '$ar s'."
+ orderlib=false
+ ranlib="$ar s"
elif $ar ts bar$_a >/dev/null 2>&1 &&
$cc -o foobar $ccflags $ldflags foo$_o bar$_a $libs > /dev/null 2>&1 &&
$run ./foobar >/dev/null 2>&1; then
ranlib=":"
fi
fi
-$rm -f foo* bar*
+$rm -f foo* bar*
: check for type of arguments to select.
case "$selecttype" in
#endif
#ifndef NSIG
+# ifdef _SIG_MAX
+# define NSIG (_SIG_MAX+1)
+# endif
+#endif
+
+#ifndef NSIG
# ifdef MAXSIG
# define NSIG (MAXSIG+1)
# endif
#ifndef NSIG
# ifdef SIGARRAYSIZE
-# define NSIG (SIGARRAYSIZE+1) /* Not sure of the +1 */
+# define NSIG SIGARRAYSIZE /* Assume ary[SIGARRAYSIZE] */
# endif
#endif
: see what type of char stdio uses.
echo " "
-echo '#include <stdio.h>' | $cppstdin $cppminus > stdioh
+echo '#include <stdio.h>' > stdio.c
+$cppstdin $cppminus < stdio.c > stdioh
if $contains 'unsigned.*char.*_ptr;' stdioh >/dev/null 2>&1 ; then
echo "Your stdio uses unsigned chars." >&4
stdchar="unsigned char"
echo "Your stdio uses signed chars." >&4
stdchar="char"
fi
-$rm -f stdioh
-
-
+$rm -f stdio.* stdioh
: see what type uids are declared as in the kernel
echo " "
;;
esac
+
+case "$usesitecustomize" in
+ $define|true|[Yy]*)
+ usesitecustomize="$define"
+ ;;
+ *)
+ usesitecustomize="$undef"
+ ;;
+ esac
+
: determine compiler compiler
case "$yacc" in
'')
-: see if this is a math.h system
-set math.h i_math
-eval $inhdr
-
: see if this is a mntent.h system
set mntent.h i_mntent
eval $inhdr
eval $inhdr
echo " "
-$echo "Guessing which symbols your C compiler and preprocessor define..." >&4
+$echo "Guessing which symbols your C compiler and preprocessor define..." >&4
$cat <<'EOSH' > Cppsym.know
a29k ABI64 aegis AES_SOURCE AIX AIX32 AIX370
AIX41 AIX42 AIX43 AIX_SOURCE aixpc ALL_SOURCE
-alliant alpha am29000 AM29000 AMD64 amiga AMIGAOS AMIX
+alliant alpha am29000 AM29000 AMD64 amd64 amiga AMIGAOS AMIX
ansi ANSI_C_SOURCE apollo ardent ARM32 atarist att386 att3b
BeOS BIG_ENDIAN BIT_MSF bsd BSD bsd43 bsd4_2 bsd4_3 BSD4_3 bsd4_4
BSD_4_3 BSD_4_4 BSD_NET2 BSD_TIME BSD_TYPES BSDCOMPAT bsdi
bull c cadmus clipper CMU COFF COMPILER_VERSION
concurrent convex cpu cray CRAY CRAYMPP ctix CX_UX
-CYGWIN DGUX DGUX_SOURCE DJGPP dmert DOLPHIN DPX2 DSO
+CYGWIN DECC DGUX DGUX_SOURCE DJGPP dmert DOLPHIN DPX2 DSO
Dynix DynixPTX ELF encore EPI EXTENSIONS FAVOR_BSD
FILE_OFFSET_BITS FreeBSD GCC_NEW_VARARGS gcos gcx gimpel
GLIBC GLIBC_MINOR
USE_MISC USE_POSIX USE_POSIX199309 USE_POSIX199506 USE_POSIX2
USE_REENTRANT USE_SVID USE_UNIX98 USE_XOPEN USE_XOPEN_EXTENDED
USGr4 USGr4_2
-Utek UTek UTS UWIN uxpm uxps vax venix VMESA vms xenix Xenix286
+Utek UTek UTS UWIN uxpm uxps vax venix VMESA vms x86_64 xenix Xenix286
XOPEN_SOURCE XOPEN_SOURCE_EXTENDED XPG2 XPG2_EXTENDED
XPG3 XPG3_EXTENDED XPG4 XPG4_EXTENDED
z8000
$startsh
cat <<'EOCP' > try.c
#include <stdio.h>
+#if cpp_stuff == 1
+#define STRINGIFY(a) "a"
+#endif
+#if cpp_stuff == 42
+#define StGiFy(a) #a
+#define STRINGIFY(a) StGiFy(a)
+#endif
+#if $cpp_stuff != 1 && $cpp_stuff != 42
+# include "Bletch: How does this C preprocessor stringify macros?"
+#endif
int main() {
EOCP
$awk \\
EOSH
cat <<'EOSH' >> Cppsym.try
'length($1) > 0 {
- printf "#ifdef %s\n#if %s+0\nprintf(\"%s=%%ld\\n\", (long)%s);\n#else\nprintf(\"%s\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
- printf "#ifdef _%s\n#if _%s+0\nprintf(\"_%s=%%ld\\n\", (long)_%s);\n#else\nprintf(\"_%s\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
- printf "#ifdef __%s\n#if __%s+0\nprintf(\"__%s=%%ld\\n\", (long)__%s);\n#else\nprintf(\"__%s\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
- printf "#ifdef __%s__\n#if __%s__+0\nprintf(\"__%s__=%%ld\\n\", (long)__%s__);\n#else\nprintf(\"__%s__\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
+ printf "#ifdef %s\nprintf(\"%s=%%s\\n\", STRINGIFY(%s));\n#endif\n", $1, $1, $1
+ printf "#ifdef _%s\nprintf(\"_%s=%%s\\n\", STRINGIFY(_%s));\n#endif\n", $1, $1, $1
+ printf "#ifdef __%s\nprintf(\"__%s=%%s\\n\", STRINGIFY(__%s));\n#endif\n", $1, $1, $1
+ printf "#ifdef __%s__\nprintf(\"__%s__=%%s\\n\", STRINGIFY(__%s__));\n#endif\n", $1, $1, $1
}' >> try.c
echo 'return 0;}' >> try.c
EOSH
irix-) ccflags="\$ccflags -woff 1178" ;;
os2-*) ccflags="\$ccflags -Zlinker /PM:VIO" ;;
esac
-$cc -o try $optimize \$ccflags $ldflags try.c $libs && $run ./try
+$cc -o try -Dcpp_stuff=$cpp_stuff $optimize \$ccflags $ldflags try.c $libs && $run ./try | $sed 's/ /\\\\ /g'
EOSH
chmod +x Cppsym.try
$eunicefix Cppsym.try
./Cppsym < Cppsym.know > Cppsym.true
+: Add in any linux cpp "predefined macros":
+case "$osname::$gccversion" in
+ *linux*::*.*)
+ tHdrH=_tmpHdr
+ rm -f $tHdrH'.h' $tHdrH
+ touch $tHdrH'.h'
+ if cpp -dM $tHdrH'.h' > $tHdrH'_cppsym.h' && [ -s $tHdrH'_cppsym.h' ]; then
+ sed 's/#define[\ \ ]*//;s/[\ \ ].*$//' <$tHdrH'_cppsym.h' >$tHdrH'_cppsym.real'
+ if [ -s $tHdrH'_cppsym.real' ]; then
+ cat $tHdrH'_cppsym.real' Cppsym.know | sort | uniq | ./Cppsym | sort | uniq > Cppsym.true
+ fi
+ fi
+ rm -f $tHdrH'.h' $tHdrH'_cppsym.h' $tHdrH'_cppsym.real'
+ ;;
+esac
: now check the C compiler for additional symbols
postprocess_cc_v=''
case "$osname" in
$awk '/\=/ { print $0; next }
{ print $0"=1" }' ccsym.raw >ccsym.list
-$awk '/\=/ { print $0; next }
- { print $0"=1" }' Cppsym.true >ccsym.true
-$comm -13 ccsym.true ccsym.list >ccsym.own
-$comm -12 ccsym.true ccsym.list >ccsym.com
-$comm -23 ccsym.true ccsym.list >ccsym.cpp
+$comm -13 Cppsym.true ccsym.list >ccsym.own
+$comm -12 Cppsym.true ccsym.list >ccsym.com
+$comm -23 Cppsym.true ccsym.list >ccsym.cpp
also=''
if $test -z ccsym.raw; then
echo "Your C compiler doesn't seem to define any symbols!" >&4
*) keepextensions=''
echo "You have requested that certain extensions be ignored..." >&4
for i in $avail_ext; do
- case " $i " in
- " $noextensions ") echo "Ignoring extension $i." ;;
+ case " $noextensions " in
+ *" $i "*) echo "Ignoring extension $i." ;;
*) echo "Keeping extension $i.";
keepextensions="$keepextensions $i"
;;
d_asctime_r='$d_asctime_r'
d_atolf='$d_atolf'
d_atoll='$d_atoll'
-d_attribut='$d_attribut'
+d_attribute_format='$d_attribute_format'
+d_attribute_malloc='$d_attribute_malloc'
+d_attribute_nonnull='$d_attribute_nonnull'
+d_attribute_noreturn='$d_attribute_noreturn'
+d_attribute_pure='$d_attribute_pure'
+d_attribute_unused='$d_attribute_unused'
+d_attribute_warn_unused_result='$d_attribute_warn_unused_result'
d_bcmp='$d_bcmp'
d_bcopy='$d_bcopy'
d_bsd='$d_bsd'
d_bsdgetpgrp='$d_bsdgetpgrp'
d_bsdsetpgrp='$d_bsdsetpgrp'
+d_builtin_choose_expr='$d_builtin_choose_expr'
+d_builtin_expect='$d_builtin_expect'
d_bzero='$d_bzero'
d_casti32='$d_casti32'
d_castneg='$d_castneg'
d_chroot='$d_chroot'
d_chsize='$d_chsize'
d_class='$d_class'
+d_clearenv='$d_clearenv'
d_closedir='$d_closedir'
d_cmsghdr_s='$d_cmsghdr_s'
d_const='$d_const'
d_fsync='$d_fsync'
d_ftello='$d_ftello'
d_ftime='$d_ftime'
+d_futimes='$d_futimes'
d_getcwd='$d_getcwd'
d_getespwnam='$d_getespwnam'
d_getfsstat='$d_getfsstat'
d_hasmntopt='$d_hasmntopt'
d_htonl='$d_htonl'
d_ilogbl='$d_ilogbl'
+d_inc_version_list='$d_inc_version_list'
d_index='$d_index'
d_inetaton='$d_inetaton'
d_int64_t='$d_int64_t'
d_killpg='$d_killpg'
d_lchown='$d_lchown'
d_ldbl_dig='$d_ldbl_dig'
+d_libm_lib_version='$d_libm_lib_version'
d_link='$d_link'
d_localtime_r='$d_localtime_r'
d_locconv='$d_locconv'
d_lseekproto='$d_lseekproto'
d_lstat='$d_lstat'
d_madvise='$d_madvise'
+d_malloc_good_size='$d_malloc_good_size'
+d_malloc_size='$d_malloc_size'
d_mblen='$d_mblen'
d_mbstowcs='$d_mbstowcs'
d_mbtowc='$d_mbtowc'
d_msync='$d_msync'
d_munmap='$d_munmap'
d_mymalloc='$d_mymalloc'
-d_nanosleep='$d_nanosleep'
d_nice='$d_nice'
d_nl_langinfo='$d_nl_langinfo'
d_nv_preserves_uv='$d_nv_preserves_uv'
+d_nv_zero_is_allbits_zero='$d_nv_zero_is_allbits_zero'
d_off64_t='$d_off64_t'
d_old_pthread_create_joinable='$d_old_pthread_create_joinable'
d_oldpthreads='$d_oldpthreads'
d_portable='$d_portable'
d_procselfexe='$d_procselfexe'
d_pthread_atfork='$d_pthread_atfork'
+d_pthread_attr_setscope='$d_pthread_attr_setscope'
d_pthread_yield='$d_pthread_yield'
d_pwage='$d_pwage'
d_pwchange='$d_pwchange'
d_sigaction='$d_sigaction'
d_sigprocmask='$d_sigprocmask'
d_sigsetjmp='$d_sigsetjmp'
+d_sitearch='$d_sitearch'
+d_snprintf='$d_snprintf'
d_sockatmark='$d_sockatmark'
d_sockatmarkproto='$d_sockatmarkproto'
d_socket='$d_socket'
d_socklen_t='$d_socklen_t'
d_sockpair='$d_sockpair'
d_socks5_init='$d_socks5_init'
+d_sprintf_returns_strlen='$d_sprintf_returns_strlen'
d_sqrtl='$d_sqrtl'
d_srand48_r='$d_srand48_r'
d_srandom_r='$d_srandom_r'
d_strerror='$d_strerror'
d_strerror_r='$d_strerror_r'
d_strftime='$d_strftime'
+d_strlcat='$d_strlcat'
+d_strlcpy='$d_strlcpy'
d_strtod='$d_strtod'
d_strtol='$d_strtol'
d_strtold='$d_strtold'
d_uname='$d_uname'
d_union_semun='$d_union_semun'
d_unordered='$d_unordered'
+d_unsetenv='$d_unsetenv'
d_usleep='$d_usleep'
d_usleepproto='$d_usleepproto'
d_ustat='$d_ustat'
d_voidtty='$d_voidtty'
d_volatile='$d_volatile'
d_vprintf='$d_vprintf'
+d_vsnprintf='$d_vsnprintf'
d_wait4='$d_wait4'
d_waitpid='$d_waitpid'
d_wcstombs='$d_wcstombs'
inc_version_list_init='$inc_version_list_init'
incpath='$incpath'
inews='$inews'
+initialinstalllocation='$initialinstalllocation'
installarchlib='$installarchlib'
installbin='$installbin'
installhtml1dir='$installhtml1dir'
installscript='$installscript'
installsitearch='$installsitearch'
installsitebin='$installsitebin'
-installsitehtml1='$installsitehtml1'
-installsitehtml3='$installsitehtml3'
+installsitehtml1dir='$installsitehtml1dir'
+installsitehtml3dir='$installsitehtml3dir'
installsitelib='$installsitelib'
-installsiteman1='$installsiteman1'
-installsiteman3='$installsiteman3'
+installsiteman1dir='$installsiteman1dir'
+installsiteman3dir='$installsiteman3dir'
installsitescript='$installsitescript'
installstyle='$installstyle'
installusrbinperl='$installusrbinperl'
installvendorarch='$installvendorarch'
installvendorbin='$installvendorbin'
-installvendorhtml1='$installvendorhtml1'
-installvendorhtml3='$installvendorhtml3'
+installvendorhtml1dir='$installvendorhtml1dir'
+installvendorhtml3dir='$installvendorhtml3dir'
installvendorlib='$installvendorlib'
-installvendorman1='$installvendorman1'
-installvendorman3='$installvendorman3'
+installvendorman1dir='$installvendorman1dir'
+installvendorman3dir='$installvendorman3dir'
installvendorscript='$installvendorscript'
intsize='$intsize'
issymlink='$issymlink'
ls='$ls'
lseeksize='$lseeksize'
lseektype='$lseektype'
+mad='$mad'
+madlyh='$madlyh'
+madlyobj='$madlyobj'
+madlysrc='$madlysrc'
mail='$mail'
mailx='$mailx'
make='$make'
man3direxp='$man3direxp'
man3ext='$man3ext'
mips_type='$mips_type'
+mistrustnm='$mistrustnm'
mkdir='$mkdir'
mmaptype='$mmaptype'
modetype='$modetype'
phostname='$phostname'
pidtype='$pidtype'
plibpth='$plibpth'
-pm_apiversion='$pm_apiversion'
pmake='$pmake'
pr='$pr'
prefix='$prefix'
sitearchexp='$sitearchexp'
sitebin='$sitebin'
sitebinexp='$sitebinexp'
-sitehtml1='$sitehtml1'
-sitehtml1exp='$sitehtml1exp'
-sitehtml3='$sitehtml3'
-sitehtml3exp='$sitehtml3exp'
+sitehtml1dir='$sitehtml1dir'
+sitehtml1direxp='$sitehtml1direxp'
+sitehtml3dir='$sitehtml3dir'
+sitehtml3direxp='$sitehtml3direxp'
sitelib='$sitelib'
sitelib_stem='$sitelib_stem'
sitelibexp='$sitelibexp'
-siteman1='$siteman1'
-siteman1exp='$siteman1exp'
-siteman3='$siteman3'
-siteman3exp='$siteman3exp'
+siteman1dir='$siteman1dir'
+siteman1direxp='$siteman1direxp'
+siteman3dir='$siteman3dir'
+siteman3direxp='$siteman3direxp'
siteprefix='$siteprefix'
siteprefixexp='$siteprefixexp'
sitescript='$sitescript'
useithreads='$useithreads'
uselargefiles='$uselargefiles'
uselongdouble='$uselongdouble'
+usemallocwrap='$usemallocwrap'
usemorebits='$usemorebits'
usemultiplicity='$usemultiplicity'
usemymalloc='$usemymalloc'
useperlio='$useperlio'
useposix='$useposix'
usereentrant='$usereentrant'
+userelocatableinc='$userelocatableinc'
usesfio='$usesfio'
useshrplib='$useshrplib'
+usesitecustomize='$usesitecustomize'
usesocks='$usesocks'
usethreads='$usethreads'
usevendorprefix='$usevendorprefix'
vendorarchexp='$vendorarchexp'
vendorbin='$vendorbin'
vendorbinexp='$vendorbinexp'
-vendorhtml1='$vendorhtml1'
-vendorhtml1exp='$vendorhtml1exp'
-vendorhtml3='$vendorhtml3'
-vendorhtml3exp='$vendorhtml3exp'
+vendorhtml1dir='$vendorhtml1dir'
+vendorhtml1direxp='$vendorhtml1direxp'
+vendorhtml3dir='$vendorhtml3dir'
+vendorhtml3direxp='$vendorhtml3direxp'
vendorlib='$vendorlib'
vendorlib_stem='$vendorlib_stem'
vendorlibexp='$vendorlibexp'
-vendorman1='$vendorman1'
-vendorman1exp='$vendorman1exp'
-vendorman3='$vendorman3'
-vendorman3exp='$vendorman3exp'
+vendorman1dir='$vendorman1dir'
+vendorman1direxp='$vendorman1direxp'
+vendorman3dir='$vendorman3dir'
+vendorman3direxp='$vendorman3direxp'
vendorprefix='$vendorprefix'
vendorprefixexp='$vendorprefixexp'
vendorscript='$vendorscript'
vi='$vi'
voidflags='$voidflags'
xlibpth='$xlibpth'
-xs_apiversion='$xs_apiversion'
yacc='$yacc'
yaccflags='$yaccflags'
zcat='$zcat'
https://perl5.git.perl.org / perl5.git / blobdiff