* op_type The type of the operation.
* op_opt Whether or not the op has been optimised by the
* peephole optimiser.
- *
- * See the comments in S_clear_yystack() for more
- * details on the following three flags:
- *
- * op_latefree tell op_free() to clear this op (and free any kids)
- * but not yet deallocate the struct. This means that
- * the op may be safely op_free()d multiple times
- * op_latefreed an op_latefree op has been op_free()d
- * op_attached this op (sub)tree has been attached to a CV
- *
- * op_spare three spare bits!
+ * op_slabbed allocated via opslab
+ * op_static tell op_free() to skip PerlMemShared_free(), when
+ * !op_slabbed.
+ * op_savefree on savestack via SAVEFREEOP
+ * op_spare Three spare bits
* op_flags Flags common to all operations. See OPf_* below.
* op_private Flags peculiar to a particular operation (BUT,
* by default, set to the number of children until
PADOFFSET op_targ; \
PERL_BITFIELD16 op_type:9; \
PERL_BITFIELD16 op_opt:1; \
- PERL_BITFIELD16 op_latefree:1; \
- PERL_BITFIELD16 op_latefreed:1; \
- PERL_BITFIELD16 op_attached:1; \
+ PERL_BITFIELD16 op_slabbed:1; \
+ PERL_BITFIELD16 op_savefree:1; \
+ PERL_BITFIELD16 op_static:1; \
PERL_BITFIELD16 op_spare:3; \
U8 op_flags; \
U8 op_private;
then all the other bit-fields before/after it should change their
types too to let VC pack them into the same 4 byte integer.*/
+/* for efficiency, requires OPf_WANT_VOID == G_VOID etc */
#define OP_GIMME(op,dfl) \
- (((op)->op_flags & OPf_WANT) == OPf_WANT_VOID ? G_VOID : \
- ((op)->op_flags & OPf_WANT) == OPf_WANT_SCALAR ? G_SCALAR : \
- ((op)->op_flags & OPf_WANT) == OPf_WANT_LIST ? G_ARRAY : \
- dfl)
+ (((op)->op_flags & OPf_WANT) ? ((op)->op_flags & OPf_WANT) : dfl)
#define OP_GIMME_REVERSE(flags) ((flags) & G_WANT)
/* On OP_ENTERSUB || OP_NULL, saw a "do". */
/* On OP_EXISTS, treat av as av, not avhv. */
/* On OP_(ENTER|LEAVE)EVAL, don't clear $@ */
- /* On pushre, rx is used as part of split, e.g. split " " */
+ /* On OP_SPLIT, special split " " */
/* On regcomp, "use re 'eval'" was in scope */
/* On OP_READLINE, was <$filehandle> */
/* On RV2[ACGHS]V, don't create GV--in
- Before ck_glob, called as CORE::glob
- After ck_glob, use Perl glob function
*/
+ /* On OP_PADRANGE, push @_ */
/* old names; don't use in new code, but don't break them, either */
#define OPf_LIST OPf_WANT_LIST
/* OP_RV2[AGH]V, OP_PAD[AH]V, OP_[AH]ELEM, OP_[AH]SLICE OP_AV2ARYLEN,
OP_R?KEYS, OP_SUBSTR, OP_POS, OP_VEC */
#define OPpMAYBE_LVSUB 8 /* We might be an lvalue to return */
+ /* OP_RV2HV and OP_PADHV */
+#define OPpTRUEBOOL 32 /* %hash in (%hash || $foo) in
+ void context */
+#define OPpMAYBE_TRUEBOOL 64 /* %hash in (%hash || $foo) where
+ cx is not known till run time */
/* OP_SUBSTR only */
#define OPpSUBSTR_REPL_FIRST 16 /* 1st arg is replacement string */
#define OPpPAD_STATE 16 /* is a "state" pad */
/* for OP_RV2?V, lower bits carry hints (currently only HINT_STRICT_REFS) */
+ /* OP_PADRANGE only */
+ /* bit 7 is OPpLVAL_INTRO */
+#define OPpPADRANGE_COUNTMASK 127 /* bits 6..0 hold target range, */
+#define OPpPADRANGE_COUNTSHIFT 7 /* 7 bits in total */
+
/* OP_RV2GV only */
#define OPpDONT_INIT_GV 4 /* Call gv_fetchpv with GV_NOINIT */
/* (Therefore will return whatever is currently in the symbol table, not
#define OPpCONST_STRICT 8 /* bareword subject to strict 'subs' */
#define OPpCONST_ENTERED 16 /* Has been entered as symbol. */
#define OPpCONST_BARE 64 /* Was a bare word (filehandle?). */
+#define OPpCONST_FOLDED 128 /* Result of constant folding */
/* Private for OP_FLIP/FLOP */
#define OPpFLIP_LINENUM 64 /* Range arg potentially a line num. */
* OP_MATCH and OP_QR */
#define PMf_ONCE (1<<(PMf_BASE_SHIFT+1))
-/* replacement contains variables */
-#define PMf_MAYBE_CONST (1<<(PMf_BASE_SHIFT+2))
-
/* PMf_ONCE has matched successfully. Not used under threading. */
#define PMf_USED (1<<(PMf_BASE_SHIFT+3))
#include "reentr.h"
#endif
-#if defined(PL_OP_SLAB_ALLOC)
#define NewOp(m,var,c,type) \
(var = (type *) Perl_Slab_Alloc(aTHX_ c*sizeof(type)))
#define NewOpSz(m,var,size) \
(var = (OP *) Perl_Slab_Alloc(aTHX_ size))
#define FreeOp(p) Perl_Slab_Free(aTHX_ p)
-#else
-#define NewOp(m, var, c, type) \
- (var = (MEM_WRAP_CHECK_(c,type) \
- (type*)PerlMemShared_calloc(c, sizeof(type))))
-#define NewOpSz(m, var, size) \
- (var = (OP*)PerlMemShared_calloc(1, size))
-#define FreeOp(p) PerlMemShared_free(p)
+
+/*
+ * The per-CV op slabs consist of a header (the opslab struct) and a bunch
+ * of space for allocating op slots, each of which consists of two pointers
+ * followed by an op. The first pointer points to the next op slot. The
+ * second points to the slab. At the end of the slab is a null pointer,
+ * so that slot->opslot_next - slot can be used to determine the size
+ * of the op.
+ *
+ * Each CV can have multiple slabs; opslab_next points to the next slab, to
+ * form a chain. All bookkeeping is done on the first slab, which is where
+ * all the op slots point.
+ *
+ * Freed ops are marked as freed and attached to the freed chain
+ * via op_next pointers.
+ *
+ * When there is more than one slab, the second slab in the slab chain is
+ * assumed to be the one with free space available. It is used when allo-
+ * cating an op if there are no freed ops available or big enough.
+ */
+
+#ifdef PERL_CORE
+struct opslot {
+ /* keep opslot_next first */
+ OPSLOT * opslot_next; /* next slot */
+ OPSLAB * opslot_slab; /* owner */
+ OP opslot_op; /* the op itself */
+};
+
+struct opslab {
+ OPSLOT * opslab_first; /* first op in this slab */
+ OPSLAB * opslab_next; /* next slab */
+ OP * opslab_freed; /* chain of freed ops */
+ size_t opslab_refcnt; /* number of ops */
+# ifdef PERL_DEBUG_READONLY_OPS
+ U16 opslab_size; /* size of slab in pointers */
+ bool opslab_readonly;
+# endif
+ OPSLOT opslab_slots; /* slots begin here */
+};
+
+# define OPSLOT_HEADER STRUCT_OFFSET(OPSLOT, opslot_op)
+# define OPSLOT_HEADER_P (OPSLOT_HEADER/sizeof(I32 *))
+# define OpSLOT(o) (assert_(o->op_slabbed) \
+ (OPSLOT *)(((char *)o)-OPSLOT_HEADER))
+# define OpSLAB(o) OpSLOT(o)->opslot_slab
+# define OpslabREFCNT_dec(slab) \
+ (((slab)->opslab_refcnt == 1) \
+ ? opslab_free_nopad(slab) \
+ : (void)--(slab)->opslab_refcnt)
+ /* Variant that does not null out the pads */
+# define OpslabREFCNT_dec_padok(slab) \
+ (((slab)->opslab_refcnt == 1) \
+ ? opslab_free(slab) \
+ : (void)--(slab)->opslab_refcnt)
#endif
struct block_hooks {
https://perl5.git.perl.org / perl5.git / blobdiff