* op_type The type of the operation.
* op_opt Whether or not the op has been optimised by the
* peephole optimiser.
- *
- * See the comments in S_clear_yystack() for more
- * details on the following three flags:
- *
- * op_latefree tell op_free() to clear this op (and free any kids)
- * but not yet deallocate the struct. This means that
- * the op may be safely op_free()d multiple times
- * op_latefreed an op_latefree op has been op_free()d
- * op_attached this op (sub)tree has been attached to a CV
- *
- * op_spare three spare bits!
+ * op_slabbed allocated via opslab
+ * op_static tell op_free() to skip PerlMemShared_free(), when
+ * !op_slabbed.
+ * op_savefree on savestack via SAVEFREEOP
+ * op_folded Result/remainder of a constant fold operation.
+ * op_moresib this op is is not the last sibling
+ * op_spare One spare bit
* op_flags Flags common to all operations. See OPf_* below.
* op_private Flags peculiar to a particular operation (BUT,
* by default, set to the number of children until
* the operation is privatized by a check routine,
* which may or may not check number of children).
*/
+#include "op_reg_common.h"
#define OPCODE U16
-#ifdef PERL_MAD
-# define MADPROP_IN_BASEOP MADPROP* op_madprop;
+typedef PERL_BITFIELD16 Optype;
+
+/* this field now either points to the next sibling or to the parent,
+ * depending on op_moresib. So rename it from op_sibling to op_sibparent.
+ */
+#ifdef PERL_OP_PARENT
+# define _OP_SIBPARENT_FIELDNAME op_sibparent
#else
-# define MADPROP_IN_BASEOP
+# define _OP_SIBPARENT_FIELDNAME op_sibling
#endif
-typedef PERL_BITFIELD16 Optype;
-
#ifdef BASEOP_DEFINITION
#define BASEOP BASEOP_DEFINITION
#else
#define BASEOP \
OP* op_next; \
- OP* op_sibling; \
- OP* (CPERLscope(*op_ppaddr))(pTHX); \
- MADPROP_IN_BASEOP \
+ OP* _OP_SIBPARENT_FIELDNAME;\
+ OP* (*op_ppaddr)(pTHX); \
PADOFFSET op_targ; \
PERL_BITFIELD16 op_type:9; \
PERL_BITFIELD16 op_opt:1; \
- PERL_BITFIELD16 op_latefree:1; \
- PERL_BITFIELD16 op_latefreed:1; \
- PERL_BITFIELD16 op_attached:1; \
- PERL_BITFIELD16 op_spare:3; \
+ PERL_BITFIELD16 op_slabbed:1; \
+ PERL_BITFIELD16 op_savefree:1; \
+ PERL_BITFIELD16 op_static:1; \
+ PERL_BITFIELD16 op_folded:1; \
+ PERL_BITFIELD16 op_moresib:1; \
+ PERL_BITFIELD16 op_spare:1; \
U8 op_flags; \
U8 op_private;
#endif
-/* If op_type:9 is changed to :10, also change PUSHEVAL in cop.h.
+/* If op_type:9 is changed to :10, also change cx_pusheval()
Also, if the type of op_type is ever changed (e.g. to PERL_BITFIELD32)
then all the other bit-fields before/after it should change their
types too to let VC pack them into the same 4 byte integer.*/
+/* for efficiency, requires OPf_WANT_VOID == G_VOID etc */
#define OP_GIMME(op,dfl) \
- (((op)->op_flags & OPf_WANT) == OPf_WANT_VOID ? G_VOID : \
- ((op)->op_flags & OPf_WANT) == OPf_WANT_SCALAR ? G_SCALAR : \
- ((op)->op_flags & OPf_WANT) == OPf_WANT_LIST ? G_ARRAY : \
- dfl)
+ (((op)->op_flags & OPf_WANT) ? ((op)->op_flags & OPf_WANT) : dfl)
#define OP_GIMME_REVERSE(flags) ((flags) & G_WANT)
=for apidoc Amn|U32|GIMME_V
The XSUB-writer's equivalent to Perl's C<wantarray>. Returns C<G_VOID>,
C<G_SCALAR> or C<G_ARRAY> for void, scalar or list context,
-respectively. See L<perlcall> for a usage example.
+respectively.
See L<perlcall> for a usage example.
=for apidoc Amn|U32|GIMME
A backward-compatible version of C<GIMME_V> which can only return
/* On local LVAL, don't init local value. */
/* On OP_SORT, subroutine is inlined. */
/* On OP_NOT, inversion was implicit. */
- /* On OP_LEAVE, don't restore curpm. */
+ /* On OP_LEAVE, don't restore curpm, e.g.
+ * /(...)/ while ...>; */
/* On truncate, we truncate filehandle */
/* On control verbs, we saw no label */
/* On flipflop, we saw ... instead of .. */
/* On UNOPs, saw bare parens, e.g. eof(). */
- /* On OP_ENTERSUB || OP_NULL, saw a "do". */
+ /* On OP_CHDIR, handle (or bare parens) */
+ /* On OP_NULL, saw a "do". */
/* On OP_EXISTS, treat av as av, not avhv. */
/* On OP_(ENTER|LEAVE)EVAL, don't clear $@ */
- /* On OP_ENTERITER, loop var is per-thread */
- /* On pushre, rx is used as part of split, e.g. split " " */
+ /* On pushre, rx is used as part of split, e.g. split " " */
/* On regcomp, "use re 'eval'" was in scope */
- /* On OP_READLINE, was <$filehandle> */
/* On RV2[ACGHS]V, don't create GV--in
defined()*/
/* On OP_DBSTATE, indicates breakpoint
* (runtime property) */
- /* On OP_AELEMFAST, indiciates pad var */
/* On OP_REQUIRE, was seen as CORE::require */
- /* On OP_ENTERWHEN, there's no condition */
- /* On OP_BREAK, an implicit break */
+ /* On OP_(ENTER|LEAVE)WHEN, there's
+ no condition */
/* On OP_SMARTMATCH, an implicit smartmatch */
/* On OP_ANONHASH and OP_ANONLIST, create a
reference to the new anon hash or array */
- /* On OP_ENTER, store caller context */
- /* On OP_HELEM and OP_HSLICE, localization will be followed
- by assignment, so do not wipe the target if it is special
- (e.g. a glob or a magic SV) */
+ /* On OP_HELEM, OP_MULTIDEREF and OP_HSLICE,
+ localization will be followed by assignment,
+ so do not wipe the target if it is special
+ (e.g. a glob or a magic SV) */
+ /* On OP_MATCH, OP_SUBST & OP_TRANS, the
+ operand of a logical or conditional
+ that was optimised away, so it should
+ not be bound via =~ */
+ /* On OP_CONST, from a constant CV */
+ /* On OP_GLOB, two meanings:
+ - Before ck_glob, called as CORE::glob
+ - After ck_glob, use Perl glob function
+ */
+ /* On OP_PADRANGE, push @_ */
+ /* On OP_DUMP, has no label */
+ /* On OP_UNSTACK, in a C-style for loop */
+/* There is no room in op_flags for this one, so it has its own bit-
+ field member (op_folded) instead. The flag is only used to tell
+ op_convert_list to set op_folded. */
+#define OPf_FOLDED 1<<16
/* old names; don't use in new code, but don't break them, either */
#define OPf_LIST OPf_WANT_LIST
#define OPf_KNOW OPf_WANT
-#define GIMME \
+#if !defined(PERL_CORE) && !defined(PERL_EXT)
+# define GIMME \
(PL_op->op_flags & OPf_WANT \
? ((PL_op->op_flags & OPf_WANT) == OPf_WANT_LIST \
? G_ARRAY \
: G_SCALAR) \
: dowantarray())
+#endif
-/* NOTE: OP_NEXTSTATE and OP_DBSTATE (i.e. COPs) carry lower
- * bits of PL_hints in op_private */
-/* Private for lvalues */
-#define OPpLVAL_INTRO 128 /* Lvalue must be localized or lvalue sub */
+/* NOTE: OPp* flags are now auto-generated and defined in opcode.h,
+ * from data in regen/op_private */
-/* Private for OP_LEAVE, OP_LEAVESUB, OP_LEAVESUBLV and OP_LEAVEWRITE */
-#define OPpREFCOUNTED 64 /* op_targ carries a refcount */
-/* Private for OP_AASSIGN */
-#define OPpASSIGN_COMMON 64 /* Left & right have syms in common. */
+#define OPpTRANS_ALL (OPpTRANS_FROM_UTF|OPpTRANS_TO_UTF|OPpTRANS_IDENTICAL|OPpTRANS_SQUASH|OPpTRANS_COMPLEMENT|OPpTRANS_GROWS|OPpTRANS_DELETE)
+
+
+
+/* Mask for OP_ENTERSUB flags, the absence of which must be propagated
+ in dynamic context */
+#define OPpENTERSUB_LVAL_MASK (OPpLVAL_INTRO|OPpENTERSUB_INARGS)
+
+
+/* things that can be elements of op_aux */
+typedef union {
+ PADOFFSET pad_offset;
+ SV *sv;
+ IV iv;
+ UV uv;
+} UNOP_AUX_item;
+
+#ifdef USE_ITHREADS
+# define UNOP_AUX_item_sv(item) PAD_SVl((item)->pad_offset);
+#else
+# define UNOP_AUX_item_sv(item) ((item)->sv);
+#endif
-/* Private for OP_SASSIGN */
-#define OPpASSIGN_BACKWARDS 64 /* Left & right switched. */
-#define OPpASSIGN_CV_TO_GV 128 /* Possible optimisation for constants. */
-/* Private for OP_MATCH and OP_SUBST{,CONST} */
-#define OPpRUNTIME 64 /* Pattern coming in on the stack */
-/* Private for OP_TRANS */
-#define OPpTRANS_FROM_UTF 1
-#define OPpTRANS_TO_UTF 2
-#define OPpTRANS_IDENTICAL 4 /* right side is same as left */
-#define OPpTRANS_SQUASH 8
- /* 16 is used for OPpTARGET_MY */
-#define OPpTRANS_COMPLEMENT 32
-#define OPpTRANS_GROWS 64
-#define OPpTRANS_DELETE 128
-#define OPpTRANS_ALL (OPpTRANS_FROM_UTF|OPpTRANS_TO_UTF|OPpTRANS_IDENTICAL|OPpTRANS_SQUASH|OPpTRANS_COMPLEMENT|OPpTRANS_GROWS|OPpTRANS_DELETE)
-/* Private for OP_REPEAT */
-#define OPpREPEAT_DOLIST 64 /* List replication. */
-
-/* Private for OP_RV2GV, OP_RV2SV, OP_AELEM, OP_HELEM, OP_PADSV */
-#define OPpDEREF (32|64) /* autovivify: Want ref to something: */
-#define OPpDEREF_AV 32 /* Want ref to AV. */
-#define OPpDEREF_HV 64 /* Want ref to HV. */
-#define OPpDEREF_SV (32|64) /* Want ref to SV. */
-/* Private for OP_RV2SV, OP_RV2AV, OP_RV2AV */
-#define OPpDEREFed 4 /* prev op was OPpDEREF */
- /* OP_ENTERSUB only */
-#define OPpENTERSUB_DB 16 /* Debug subroutine. */
-#define OPpENTERSUB_HASTARG 32 /* Called from OP tree. */
-#define OPpENTERSUB_NOMOD 64 /* Immune to mod() for :attrlist. */
- /* OP_ENTERSUB and OP_RV2CV only */
-#define OPpENTERSUB_AMPER 8 /* Used & form to call. */
-#define OPpENTERSUB_NOPAREN 128 /* bare sub call (without parens) */
-#define OPpENTERSUB_INARGS 4 /* Lval used as arg to a sub. */
- /* OP_GV only */
-#define OPpEARLY_CV 32 /* foo() called before sub foo was parsed */
- /* OP_?ELEM only */
-#define OPpLVAL_DEFER 16 /* Defer creation of array/hash elem */
- /* OP_RV2?V, OP_GVSV, OP_ENTERITER only */
-#define OPpOUR_INTRO 16 /* Variable was in an our() */
- /* OP_RV2[AGH]V, OP_PAD[AH]V, OP_[AH]ELEM */
-#define OPpMAYBE_LVSUB 8 /* We might be an lvalue to return */
- /* OP_PADSV only */
-#define OPpPAD_STATE 16 /* is a "state" pad */
- /* for OP_RV2?V, lower bits carry hints (currently only HINT_STRICT_REFS) */
-
- /* OP_RV2GV only */
-#define OPpDONT_INIT_GV 4 /* Call gv_fetchpv with GV_NOINIT */
-/* (Therefore will return whatever is currently in the symbol table, not
- guaranteed to be a PVGV) */
-
- /* OP_RV2CV only */
-#define OPpMAY_RETURN_CONSTANT 1 /* If a constant sub, return the constant */
-
-/* Private for OPs with TARGLEX */
- /* (lower bits may carry MAXARG) */
-#define OPpTARGET_MY 16 /* Target is PADMY. */
-
-/* Private for OP_ENTERITER and OP_ITER */
-#define OPpITER_REVERSED 4 /* for (reverse ...) */
-#define OPpITER_DEF 8 /* for $_ or for my $_ */
-
-/* Private for OP_CONST */
-#define OPpCONST_NOVER 2 /* no 6; */
-#define OPpCONST_SHORTCIRCUIT 4 /* eg the constant 5 in (5 || foo) */
-#define OPpCONST_STRICT 8 /* bearword subject to strict 'subs' */
-#define OPpCONST_ENTERED 16 /* Has been entered as symbol. */
-#define OPpCONST_ARYBASE 32 /* Was a $[ translated to constant. */
-#define OPpCONST_BARE 64 /* Was a bare word (filehandle?). */
-#define OPpCONST_WARNING 128 /* Was a $^W translated to constant. */
-
-/* Private for OP_FLIP/FLOP */
-#define OPpFLIP_LINENUM 64 /* Range arg potentially a line num. */
-
-/* Private for OP_LIST */
-#define OPpLIST_GUESSED 64 /* Guessed that pushmark was needed. */
-
-/* Private for OP_DELETE */
-#define OPpSLICE 64 /* Operating on a list of keys */
-/* Also OPpLVAL_INTRO (128) */
-
-/* Private for OP_EXISTS */
-#define OPpEXISTS_SUB 64 /* Checking for &sub, not {} or []. */
-
-/* Private for OP_SORT */
-#define OPpSORT_NUMERIC 1 /* Optimized away { $a <=> $b } */
-#define OPpSORT_INTEGER 2 /* Ditto while under "use integer" */
-#define OPpSORT_REVERSE 4 /* Reversed sort */
-#define OPpSORT_INPLACE 8 /* sort in-place; eg @a = sort @a */
-#define OPpSORT_DESCEND 16 /* Descending sort */
-#define OPpSORT_QSORT 32 /* Use quicksort (not mergesort) */
-#define OPpSORT_STABLE 64 /* Use a stable algorithm */
-
-/* Private for OP_REVERSE */
-#define OPpREVERSE_INPLACE 8 /* reverse in-place (@a = reverse @a) */
-
-/* Private for OP_OPEN and OP_BACKTICK */
-#define OPpOPEN_IN_RAW 16 /* binmode(F,":raw") on input fh */
-#define OPpOPEN_IN_CRLF 32 /* binmode(F,":crlf") on input fh */
-#define OPpOPEN_OUT_RAW 64 /* binmode(F,":raw") on output fh */
-#define OPpOPEN_OUT_CRLF 128 /* binmode(F,":crlf") on output fh */
-
-/* Private for OP_EXIT, HUSH also for OP_DIE */
-#define OPpHUSH_VMSISH 64 /* hush DCL exit msg vmsish mode*/
-#define OPpEXIT_VMSISH 128 /* exit(0) vs. exit(1) vmsish mode*/
-
-/* Private for OP_FTXXX */
-#define OPpFT_ACCESS 2 /* use filetest 'access' */
-#define OPpFT_STACKED 4 /* stacked filetest, as in "-f -x $f" */
-
-/* Private for OP_(MAP|GREP)(WHILE|START) */
-#define OPpGREP_LEX 2 /* iterate over lexical $_ */
-
-/* Private for OP_ENTEREVAL */
-#define OPpEVAL_HAS_HH 2 /* Does it have a copy of %^H */
-
struct op {
BASEOP
};
OP * op_first;
};
+struct unop_aux {
+ BASEOP
+ OP *op_first;
+ UNOP_AUX_item *op_aux;
+};
+
struct binop {
BASEOP
OP * op_first;
OP * op_last;
};
+struct methop {
+ BASEOP
+ union {
+ /* op_u.op_first *must* be aligned the same as the op_first
+ * field of the other op types, and op_u.op_meth_sv *must*
+ * be aligned with op_sv */
+ OP* op_first; /* optree for method name */
+ SV* op_meth_sv; /* static method name */
+ } op_u;
+#ifdef USE_ITHREADS
+ PADOFFSET op_rclass_targ; /* pad index for redirect class */
+#else
+ SV* op_rclass_sv; /* static redirect class $o->A::meth() */
+#endif
+};
+
struct pmop {
BASEOP
OP * op_first;
OP * op_last;
#ifdef USE_ITHREADS
- IV op_pmoffset;
+ PADOFFSET op_pmoffset;
#else
REGEXP * op_pmregexp; /* compiled expression */
#endif
union {
OP * op_pmreplstart; /* Only used in OP_SUBST */
#ifdef USE_ITHREADS
- char * op_pmstashpv; /* Only used in OP_MATCH, with PMf_ONCE set */
+ PADOFFSET op_pmstashoff; /* Only used in OP_MATCH, with PMf_ONCE set */
#else
HV * op_pmstash;
#endif
} op_pmstashstartu;
+ OP * op_code_list; /* list of (?{}) code blocks */
};
#ifdef USE_ITHREADS
#define PM_SETRE(o,r) ((o)->op_pmregexp = (r))
#endif
+/* Currently these PMf flags occupy a single 32-bit word. Not all bits are
+ * currently used. The lower bits are shared with their corresponding RXf flag
+ * bits, up to but not including _RXf_PMf_SHIFT_NEXT. The unused bits
+ * immediately follow; finally the used Pmf-only (unshared) bits, so that the
+ * highest bit in the word is used. This gathers all the unused bits as a pool
+ * in the middle, like so: 11111111111111110000001111111111
+ * where the '1's represent used bits, and the '0's unused. This design allows
+ * us to allocate off one end of the pool if we need to add a shared bit, and
+ * off the other end if we need a non-shared bit, without disturbing the other
+ * bits. This maximizes the likelihood of being able to change things without
+ * breaking binary compatibility.
+ *
+ * To add shared bits, do so in op_reg_common.h. This should change
+ * _RXf_PMf_SHIFT_NEXT so that things won't compile. Then come to regexp.h and
+ * op.h and adjust the constant adders in the definitions of PMf_BASE_SHIFT and
+ * Pmf_BASE_SHIFT down by the number of shared bits you added. That's it.
+ * Things should be binary compatible. But if either of these gets to having
+ * to subtract rather than add, leave at 0 and adjust all the entries below
+ * that are in terms of this according. But if the first one of those is
+ * already PMf_BASE_SHIFT+0, there are no bits left, and a redesign is in
+ * order.
+ *
+ * To remove unshared bits, just delete its entry. If you're where breaking
+ * binary compatibility is ok to do, you might want to adjust things to move
+ * the newly opened space so that it gets absorbed into the common pool.
+ *
+ * To add unshared bits, first use up any gaps in the middle. Otherwise,
+ * allocate off the low end until you get to PMf_BASE_SHIFT+0. If that isn't
+ * enough, move PMf_BASE_SHIFT down (if possible) and add the new bit at the
+ * other end instead; this preserves binary compatibility. */
+#define PMf_BASE_SHIFT (_RXf_PMf_SHIFT_NEXT+2)
+
+/* 'use re "taint"' in scope: taint $1 etc. if target tainted */
+#define PMf_RETAINT (1U<<(PMf_BASE_SHIFT+5))
-#define PMf_RETAINT 0x00000040 /* taint $1 etc. if target tainted */
-#define PMf_ONCE 0x00000080 /* match successfully only once per
- reset, with related flag RXf_USED
- in re->extflags holding state.
- This is used only for ?? matches,
- and only on OP_MATCH and OP_QR */
+/* match successfully only once per reset, with related flag RXf_USED in
+ * re->extflags holding state. This is used only for ?? matches, and only on
+ * OP_MATCH and OP_QR */
+#define PMf_ONCE (1U<<(PMf_BASE_SHIFT+6))
-#define PMf_UNUSED 0x00000100 /* free for use */
-#define PMf_MAYBE_CONST 0x00000200 /* replacement contains variables */
+/* PMf_ONCE, i.e. ?pat?, has matched successfully. Not used under threading. */
+#define PMf_USED (1U<<(PMf_BASE_SHIFT+7))
-#define PMf_USED 0x00000400 /* PMf_ONCE has matched successfully.
- Not used under threading. */
+/* subst replacement is constant */
+#define PMf_CONST (1U<<(PMf_BASE_SHIFT+8))
-#define PMf_CONST 0x00000800 /* subst replacement is constant */
-#define PMf_KEEP 0x00001000 /* keep 1st runtime pattern forever */
-#define PMf_GLOBAL 0x00002000 /* pattern had a g modifier */
-#define PMf_CONTINUE 0x00004000 /* don't reset pos() if //g fails */
-#define PMf_EVAL 0x00008000 /* evaluating replacement as expr */
-#define PMf_NONDESTRUCT 0x00010000 /* Return substituted string instead
- of modifying it. */
+/* keep 1st runtime pattern forever */
+#define PMf_KEEP (1U<<(PMf_BASE_SHIFT+9))
-/* The following flags have exact equivalents in regcomp.h with the prefix RXf_
- * which are stored in the regexp->extflags member. If you change them here,
- * you have to change them there, and vice versa.
- */
-#define PMf_MULTILINE 0x00000001 /* assume multiple lines */
-#define PMf_SINGLELINE 0x00000002 /* assume single line */
-#define PMf_FOLD 0x00000004 /* case insensitivity */
-#define PMf_EXTENDED 0x00000008 /* chuck embedded whitespace */
-#define PMf_KEEPCOPY 0x00000010 /* copy the string when matching */
-#define PMf_LOCALE 0x00000020 /* use locale for character types */
+#define PMf_GLOBAL (1U<<(PMf_BASE_SHIFT+10)) /* pattern had a g modifier */
-/* mask of bits that need to be transfered to re->extflags */
-#define PMf_COMPILETIME (PMf_MULTILINE|PMf_SINGLELINE|PMf_LOCALE|PMf_FOLD|PMf_EXTENDED|PMf_KEEPCOPY)
+/* don't reset pos() if //g fails */
+#define PMf_CONTINUE (1U<<(PMf_BASE_SHIFT+11))
-#ifdef USE_ITHREADS
+/* evaluating replacement as expr */
+#define PMf_EVAL (1U<<(PMf_BASE_SHIFT+12))
-# define PmopSTASHPV(o) \
- (((o)->op_pmflags & PMf_ONCE) ? (o)->op_pmstashstartu.op_pmstashpv : NULL)
-# if defined (DEBUGGING) && defined(__GNUC__) && !defined(PERL_GCC_BRACE_GROUPS_FORBIDDEN)
-# define PmopSTASHPV_set(o,pv) ({ \
- assert((o)->op_pmflags & PMf_ONCE); \
- ((o)->op_pmstashstartu.op_pmstashpv = savesharedpv(pv)); \
- })
-# else
-# define PmopSTASHPV_set(o,pv) \
- ((o)->op_pmstashstartu.op_pmstashpv = savesharedpv(pv))
-# endif
-# define PmopSTASH(o) (PmopSTASHPV(o) \
- ? gv_stashpv((o)->op_pmstashstartu.op_pmstashpv,GV_ADD) : NULL)
-# define PmopSTASH_set(o,hv) PmopSTASHPV_set(o, ((hv) ? HvNAME_get(hv) : NULL))
-# define PmopSTASH_free(o) PerlMemShared_free(PmopSTASHPV(o))
+/* Return substituted string instead of modifying it. */
+#define PMf_NONDESTRUCT (1U<<(PMf_BASE_SHIFT+13))
+
+/* the pattern has a CV attached (currently only under qr/...(?{}).../) */
+#define PMf_HAS_CV (1U<<(PMf_BASE_SHIFT+14))
+/* op_code_list is private; don't free it etc. It may well point to
+ * code within another sub, with different pad etc */
+#define PMf_CODELIST_PRIVATE (1U<<(PMf_BASE_SHIFT+15))
+
+/* the PMOP is a QR (we should be able to detect that from the op type,
+ * but the regex compilation API passes just the pm flags, not the op
+ * itself */
+#define PMf_IS_QR (1U<<(PMf_BASE_SHIFT+16))
+#define PMf_USE_RE_EVAL (1U<<(PMf_BASE_SHIFT+17)) /* use re'eval' in scope */
+
+/* See comments at the beginning of these defines about adding bits. The
+ * highest bit position should be used, so that if PMf_BASE_SHIFT gets
+ * increased, the #error below will be triggered so that you will be reminded
+ * to adjust things at the other end to keep the bit positions unchanged */
+#if PMf_BASE_SHIFT+17 > 31
+# error Too many PMf_ bits used. See above and regnodes.h for any spare in middle
+#endif
+
+#ifdef USE_ITHREADS
+
+# define PmopSTASH(o) ((o)->op_pmflags & PMf_ONCE \
+ ? PL_stashpad[(o)->op_pmstashstartu.op_pmstashoff] \
+ : NULL)
+# define PmopSTASH_set(o,hv) \
+ (assert_((o)->op_pmflags & PMf_ONCE) \
+ (o)->op_pmstashstartu.op_pmstashoff = \
+ (hv) ? alloccopstash(hv) : 0)
#else
# define PmopSTASH(o) \
(((o)->op_pmflags & PMf_ONCE) ? (o)->op_pmstashstartu.op_pmstash : NULL)
# else
# define PmopSTASH_set(o,hv) ((o)->op_pmstashstartu.op_pmstash = (hv))
# endif
-# define PmopSTASHPV(o) (PmopSTASH(o) ? HvNAME_get(PmopSTASH(o)) : NULL)
- /* op_pmstashstartu.op_pmstash is not refcounted */
-# define PmopSTASHPV_set(o,pv) PmopSTASH_set((o), gv_stashpv(pv,GV_ADD))
-/* Note that if this becomes non-empty, then S_forget_pmop in op.c will need
- changing */
-# define PmopSTASH_free(o)
#endif
+#define PmopSTASHPV(o) (PmopSTASH(o) ? HvNAME_get(PmopSTASH(o)) : NULL)
+ /* op_pmstashstartu.op_pmstash is not refcounted */
+#define PmopSTASHPV_set(o,pv) PmopSTASH_set((o), gv_stashpv(pv,GV_ADD))
struct svop {
BASEOP
OP * op_lastop;
};
-#define cUNOPx(o) ((UNOP*)o)
-#define cBINOPx(o) ((BINOP*)o)
-#define cLISTOPx(o) ((LISTOP*)o)
-#define cLOGOPx(o) ((LOGOP*)o)
-#define cPMOPx(o) ((PMOP*)o)
-#define cSVOPx(o) ((SVOP*)o)
-#define cPADOPx(o) ((PADOP*)o)
-#define cPVOPx(o) ((PVOP*)o)
-#define cCOPx(o) ((COP*)o)
-#define cLOOPx(o) ((LOOP*)o)
+#define cUNOPx(o) ((UNOP*)(o))
+#define cUNOP_AUXx(o) ((UNOP_AUX*)(o))
+#define cBINOPx(o) ((BINOP*)(o))
+#define cLISTOPx(o) ((LISTOP*)(o))
+#define cLOGOPx(o) ((LOGOP*)(o))
+#define cPMOPx(o) ((PMOP*)(o))
+#define cSVOPx(o) ((SVOP*)(o))
+#define cPADOPx(o) ((PADOP*)(o))
+#define cPVOPx(o) ((PVOP*)(o))
+#define cCOPx(o) ((COP*)(o))
+#define cLOOPx(o) ((LOOP*)(o))
+#define cMETHOPx(o) ((METHOP*)(o))
#define cUNOP cUNOPx(PL_op)
+#define cUNOP_AUX cUNOP_AUXx(PL_op)
#define cBINOP cBINOPx(PL_op)
#define cLISTOP cLISTOPx(PL_op)
#define cLOGOP cLOGOPx(PL_op)
#define cLOOP cLOOPx(PL_op)
#define cUNOPo cUNOPx(o)
+#define cUNOP_AUXo cUNOP_AUXx(o)
#define cBINOPo cBINOPx(o)
#define cLISTOPo cLISTOPx(o)
#define cLOGOPo cLOGOPx(o)
#define cLOOPo cLOOPx(o)
#define kUNOP cUNOPx(kid)
+#define kUNOP_AUX cUNOP_AUXx(kid)
#define kBINOP cBINOPx(kid)
#define kLISTOP cLISTOPx(kid)
#define kLOGOP cLOGOPx(kid)
#ifdef USE_ITHREADS
# define cGVOPx_gv(o) ((GV*)PAD_SVl(cPADOPx(o)->op_padix))
-# define IS_PADGV(v) (v && SvTYPE(v) == SVt_PVGV && isGV_with_GP(v) \
- && GvIN_PAD(v))
-# define IS_PADCONST(v) (v && SvREADONLY(v))
+# ifndef PERL_CORE
+# define IS_PADGV(v) (v && isGV(v))
+# define IS_PADCONST(v) \
+ (v && (SvREADONLY(v) || (SvIsCOW(v) && !SvLEN(v))))
+# endif
# define cSVOPx_sv(v) (cSVOPx(v)->op_sv \
? cSVOPx(v)->op_sv : PAD_SVl((v)->op_targ))
# define cSVOPx_svp(v) (cSVOPx(v)->op_sv \
? &cSVOPx(v)->op_sv : &PAD_SVl((v)->op_targ))
+# define cMETHOPx_rclass(v) PAD_SVl(cMETHOPx(v)->op_rclass_targ)
#else
# define cGVOPx_gv(o) ((GV*)cSVOPx(o)->op_sv)
-# define IS_PADGV(v) FALSE
-# define IS_PADCONST(v) FALSE
+# ifndef PERL_CORE
+# define IS_PADGV(v) FALSE
+# define IS_PADCONST(v) FALSE
+# endif
# define cSVOPx_sv(v) (cSVOPx(v)->op_sv)
# define cSVOPx_svp(v) (&cSVOPx(v)->op_sv)
+# define cMETHOPx_rclass(v) (cMETHOPx(v)->op_rclass_sv)
#endif
+# define cMETHOPx_meth(v) cSVOPx_sv(v)
+
#define cGVOP_gv cGVOPx_gv(PL_op)
#define cGVOPo_gv cGVOPx_gv(o)
#define kGVOP_gv cGVOPx_gv(kid)
# define Nullop ((OP*)NULL)
#endif
-/* Lowest byte-and-a-bit of PL_opargs */
+/* Lowest byte of PL_opargs */
#define OA_MARK 1
#define OA_FOLDCONST 2
#define OA_RETSCALAR 4
#define OA_TARGET 8
-#define OA_RETINTEGER 16
+#define OA_TARGLEX 16
#define OA_OTHERINT 32
#define OA_DANGEROUS 64
#define OA_DEFGV 128
-#define OA_TARGLEX 256
-/* The next 4 bits encode op class information */
-#define OCSHIFT 9
+/* The next 4 bits (8..11) encode op class information */
+#define OCSHIFT 8
#define OA_CLASS_MASK (15 << OCSHIFT)
#define OA_BASEOP_OR_UNOP (11 << OCSHIFT)
#define OA_FILESTATOP (12 << OCSHIFT)
#define OA_LOOPEXOP (13 << OCSHIFT)
+#define OA_METHOP (14 << OCSHIFT)
+#define OA_UNOP_AUX (15 << OCSHIFT)
-#define OASHIFT 13
+/* Each remaining nybble of PL_opargs (i.e. bits 12..15, 16..19 etc)
+ * encode the type for each arg */
+#define OASHIFT 12
-/* Remaining nybbles of PL_opargs */
#define OA_SCALAR 1
#define OA_LIST 2
#define OA_AVREF 3
/* flags used by Perl_load_module() */
#define PERL_LOADMOD_DENY 0x1 /* no Module */
#define PERL_LOADMOD_NOIMPORT 0x2 /* use Module () */
-#define PERL_LOADMOD_IMPORT_OPS 0x4 /* use Module (...) */
+#define PERL_LOADMOD_IMPORT_OPS 0x4 /* import arguments
+ are passed as a sin-
+ gle op tree, not a
+ list of SVs */
-#if defined(PERL_IN_PERLY_C) || defined(PERL_IN_OP_C)
+#if defined(PERL_IN_PERLY_C) || defined(PERL_IN_OP_C) || defined(PERL_IN_TOKE_C)
#define ref(o, type) doref(o, type, TRUE)
#endif
+/*
+=head1 Optree Manipulation Functions
+
+=for apidoc Am|OP*|LINKLIST|OP *o
+Given the root of an optree, link the tree in execution order using the
+C<op_next> pointers and return the first op executed. If this has
+already been done, it will not be redone, and C<< o->op_next >> will be
+returned. If C<< o->op_next >> is not already set, C<o> should be at
+least an C<UNOP>.
+
+=cut
+*/
+
+#define LINKLIST(o) ((o)->op_next ? (o)->op_next : op_linklist((OP*)o))
+
/* no longer used anywhere in core */
#ifndef PERL_CORE
#define cv_ckproto(cv, gv, p) \
- cv_ckproto_len((cv), (gv), (p), (p) ? strlen(p) : 0)
+ cv_ckproto_len_flags((cv), (gv), (p), (p) ? strlen(p) : 0, 0)
#endif
#ifdef PERL_CORE
#include "reentr.h"
#endif
-#if defined(PL_OP_SLAB_ALLOC)
#define NewOp(m,var,c,type) \
(var = (type *) Perl_Slab_Alloc(aTHX_ c*sizeof(type)))
#define NewOpSz(m,var,size) \
(var = (OP *) Perl_Slab_Alloc(aTHX_ size))
#define FreeOp(p) Perl_Slab_Free(aTHX_ p)
-#else
-#define NewOp(m, var, c, type) \
- (var = (MEM_WRAP_CHECK_(c,type) \
- (type*)PerlMemShared_calloc(c, sizeof(type))))
-#define NewOpSz(m, var, size) \
- (var = (OP*)PerlMemShared_calloc(1, size))
-#define FreeOp(p) PerlMemShared_free(p)
+
+/*
+ * The per-CV op slabs consist of a header (the opslab struct) and a bunch
+ * of space for allocating op slots, each of which consists of two pointers
+ * followed by an op. The first pointer points to the next op slot. The
+ * second points to the slab. At the end of the slab is a null pointer,
+ * so that slot->opslot_next - slot can be used to determine the size
+ * of the op.
+ *
+ * Each CV can have multiple slabs; opslab_next points to the next slab, to
+ * form a chain. All bookkeeping is done on the first slab, which is where
+ * all the op slots point.
+ *
+ * Freed ops are marked as freed and attached to the freed chain
+ * via op_next pointers.
+ *
+ * When there is more than one slab, the second slab in the slab chain is
+ * assumed to be the one with free space available. It is used when allo-
+ * cating an op if there are no freed ops available or big enough.
+ */
+
+#ifdef PERL_CORE
+struct opslot {
+ /* keep opslot_next first */
+ OPSLOT * opslot_next; /* next slot */
+ OPSLAB * opslot_slab; /* owner */
+ OP opslot_op; /* the op itself */
+};
+
+struct opslab {
+ OPSLOT * opslab_first; /* first op in this slab */
+ OPSLAB * opslab_next; /* next slab */
+ OP * opslab_freed; /* chain of freed ops */
+ size_t opslab_refcnt; /* number of ops */
+# ifdef PERL_DEBUG_READONLY_OPS
+ U16 opslab_size; /* size of slab in pointers */
+ bool opslab_readonly;
+# endif
+ OPSLOT opslab_slots; /* slots begin here */
+};
+
+# define OPSLOT_HEADER STRUCT_OFFSET(OPSLOT, opslot_op)
+# define OPSLOT_HEADER_P (OPSLOT_HEADER/sizeof(I32 *))
+# define OpSLOT(o) (assert_(o->op_slabbed) \
+ (OPSLOT *)(((char *)o)-OPSLOT_HEADER))
+# define OpSLAB(o) OpSLOT(o)->opslot_slab
+# define OpslabREFCNT_dec(slab) \
+ (((slab)->opslab_refcnt == 1) \
+ ? opslab_free_nopad(slab) \
+ : (void)--(slab)->opslab_refcnt)
+ /* Variant that does not null out the pads */
+# define OpslabREFCNT_dec_padok(slab) \
+ (((slab)->opslab_refcnt == 1) \
+ ? opslab_free(slab) \
+ : (void)--(slab)->opslab_refcnt)
#endif
struct block_hooks {
/*
=head1 Compile-time scope hooks
-=for apidoc m|U32|BhkFLAGS|BHK *hk
+=for apidoc mx|U32|BhkFLAGS|BHK *hk
Return the BHK's flags.
-=for apidoc m|void *|BhkENTRY|BHK *hk|which
-Return an entry from the BHK structure. I<which> is a preprocessor token
-indicating which entry to return. If the appropriate flag is not set
-this will return NULL. The type of the return value depends on which
+=for apidoc mx|void *|BhkENTRY|BHK *hk|which
+Return an entry from the BHK structure. C<which> is a preprocessor token
+indicating which entry to return. If the appropriate flag is not set
+this will return C<NULL>. The type of the return value depends on which
entry you ask for.
-=for apidoc Am|void|BhkENTRY_set|BHK *hk|which|void *ptr
+=for apidoc Amx|void|BhkENTRY_set|BHK *hk|which|void *ptr
Set an entry in the BHK structure, and set the flags to indicate it is
-valid. I<which> is a preprocessing token indicating which entry to set.
-The type of
I<ptr> depends on the entry.
+valid. C<which> is a preprocessing token indicating which entry to set.
+The type of
C<ptr> depends on the entry.
-=for apidoc Am|void|BhkDISABLE|BHK *hk|which
+=for apidoc Amx|void|BhkDISABLE|BHK *hk|which
Temporarily disable an entry in this BHK structure, by clearing the
-appropriate flag. I<which> is a preprocessor token indicating which
+appropriate flag. C<which> is a preprocessor token indicating which
entry to disable.
-=for apidoc Am|void|BhkENABLE|BHK *hk|which
+=for apidoc Amx|void|BhkENABLE|BHK *hk|which
Re-enable an entry in this BHK structure, by setting the appropriate
-flag. I<which> is a preprocessor token indicating which entry to enable.
+flag. C<which> is a preprocessor token indicating which entry to enable.
This will assert (under -DDEBUGGING) if the entry doesn't contain a valid
pointer.
-=for apidoc m|void|CALL_BLOCK_HOOKS|which|arg
-Call all the registered block hooks for type I<which>. I<which> is a
-preprocessing token; the type of I<arg> depends on I<which>.
+=for apidoc mx|void|CALL_BLOCK_HOOKS|which|arg
+Call all the registered block hooks for type C<which>. C<which> is a
+preprocessing token; the type of C<arg> depends on C<which>.
=cut
*/
#define BhkFLAGS(hk) ((hk)->bhk_flags)
-#define BHKf_start 0x01
-#define BHKf_pre_end 0x02
-#define BHKf_post_end 0x04
-#define BHKf_eval 0x08
+#define BHKf_bhk_start 0x01
+#define BHKf_bhk_pre_end 0x02
+#define BHKf_bhk_post_end 0x04
+#define BHKf_bhk_eval 0x08
#define BhkENTRY(hk, which) \
- ((BhkFLAGS(hk) & BHKf_ ## which) ? ((hk)->bhk_ ## which) : NULL)
+ ((BhkFLAGS(hk) & BHKf_ ## which) ? ((hk)->which) : NULL)
#define BhkENABLE(hk, which) \
STMT_START { \
#define BhkENTRY_set(hk, which, ptr) \
STMT_START { \
- (hk)->bhk_ ## which = ptr; \
+ (hk)->which = ptr; \
BhkENABLE(hk, which); \
} STMT_END
#define CALL_BLOCK_HOOKS(which, arg) \
STMT_START { \
if (PL_blockhooks) { \
- I32 i; \
- for (i = av_len(PL_blockhooks); i >= 0; i--) { \
+ SSize_t i; \
+ for (i = av_tindex(PL_blockhooks); i >= 0; i--) { \
SV *sv = AvARRAY(PL_blockhooks)[i]; \
BHK *hk; \
\
hk = INT2PTR(BHK *, SvIVX(sv)); \
\
if (BhkENTRY(hk, which)) \
- CALL_FPTR(BhkENTRY(hk, which))(aTHX_ arg); \
+ BhkENTRY(hk, which)(aTHX_ arg); \
} \
} \
} STMT_END
-#ifdef PERL_MAD
-# define MAD_NULL 1
-# define MAD_PV 2
-# define MAD_OP 3
-# define MAD_SV 4
-
-struct madprop {
- MADPROP* mad_next;
- void *mad_val;
- U32 mad_vlen;
-/* short mad_count; */
- char mad_key;
- char mad_type;
-};
+/* flags for rv2cv_op_cv */
+
+#define RV2CVOPCV_MARK_EARLY 0x00000001
+#define RV2CVOPCV_RETURN_NAME_GV 0x00000002
+#define RV2CVOPCV_RETURN_STUB 0x00000004
+#ifdef PERL_CORE /* behaviour of this flag is subject to change: */
+# define RV2CVOPCV_MAYBE_NAME_GV 0x00000008
+#endif
+#define RV2CVOPCV_FLAG_MASK 0x0000000f /* all of the above */
+
+#define op_lvalue(op,t) Perl_op_lvalue_flags(aTHX_ op,t,0)
+
+/* flags for op_lvalue_flags */
+
+#define OP_LVALUE_NO_CROAK 1
+
+/*
+=head1 Custom Operators
+
+=for apidoc Am|U32|XopFLAGS|XOP *xop
+Return the XOP's flags.
+
+=for apidoc Am||XopENTRY|XOP *xop|which
+Return a member of the XOP structure. C<which> is a cpp token
+indicating which entry to return. If the member is not set
+this will return a default value. The return type depends
+on C<which>. This macro evaluates its arguments more than
+once. If you are using C<Perl_custom_op_xop> to retreive a
+C<XOP *> from a C<OP *>, use the more efficient L</XopENTRYCUSTOM> instead.
-struct token {
- I32 tk_type;
- YYSTYPE tk_lval;
- MADPROP* tk_mad;
+=for apidoc Am||XopENTRYCUSTOM|const OP *o|which
+Exactly like C<XopENTRY(XopENTRY(Perl_custom_op_xop(aTHX_ o), which)> but more
+efficient. The C<which> parameter is identical to L</XopENTRY>.
+
+=for apidoc Am|void|XopENTRY_set|XOP *xop|which|value
+Set a member of the XOP structure. C<which> is a cpp token
+indicating which entry to set. See L<perlguts/"Custom Operators">
+for details about the available members and how
+they are used. This macro evaluates its argument
+more than once.
+
+=for apidoc Am|void|XopDISABLE|XOP *xop|which
+Temporarily disable a member of the XOP, by clearing the appropriate flag.
+
+=for apidoc Am|void|XopENABLE|XOP *xop|which
+Reenable a member of the XOP which has been disabled.
+
+=cut
+*/
+
+struct custom_op {
+ U32 xop_flags;
+ const char *xop_name;
+ const char *xop_desc;
+ U32 xop_class;
+ void (*xop_peep)(pTHX_ OP *o, OP *oldop);
};
+
+/* return value of Perl_custom_op_get_field, similar to void * then casting but
+ the U32 doesn't need truncation on 64 bit platforms in the caller, also
+ for easier macro writing */
+typedef union {
+ const char *xop_name;
+ const char *xop_desc;
+ U32 xop_class;
+ void (*xop_peep)(pTHX_ OP *o, OP *oldop);
+ XOP *xop_ptr;
+} XOPRETANY;
+
+#define XopFLAGS(xop) ((xop)->xop_flags)
+
+#define XOPf_xop_name 0x01
+#define XOPf_xop_desc 0x02
+#define XOPf_xop_class 0x04
+#define XOPf_xop_peep 0x08
+
+/* used by Perl_custom_op_get_field for option checking */
+typedef enum {
+ XOPe_xop_ptr = 0, /* just get the XOP *, don't look inside it */
+ XOPe_xop_name = XOPf_xop_name,
+ XOPe_xop_desc = XOPf_xop_desc,
+ XOPe_xop_class = XOPf_xop_class,
+ XOPe_xop_peep = XOPf_xop_peep
+} xop_flags_enum;
+
+#define XOPd_xop_name PL_op_name[OP_CUSTOM]
+#define XOPd_xop_desc PL_op_desc[OP_CUSTOM]
+#define XOPd_xop_class OA_BASEOP
+#define XOPd_xop_peep ((Perl_cpeep_t)0)
+
+#define XopENTRY_set(xop, which, to) \
+ STMT_START { \
+ (xop)->which = (to); \
+ (xop)->xop_flags |= XOPf_ ## which; \
+ } STMT_END
+
+#define XopENTRY(xop, which) \
+ ((XopFLAGS(xop) & XOPf_ ## which) ? (xop)->which : XOPd_ ## which)
+
+#define XopENTRYCUSTOM(o, which) \
+ (Perl_custom_op_get_field(aTHX_ o, XOPe_ ## which).which)
+
+#define XopDISABLE(xop, which) ((xop)->xop_flags &= ~XOPf_ ## which)
+#define XopENABLE(xop, which) \
+ STMT_START { \
+ (xop)->xop_flags |= XOPf_ ## which; \
+ assert(XopENTRY(xop, which)); \
+ } STMT_END
+
+#define Perl_custom_op_xop(x) \
+ (Perl_custom_op_get_field(x, XOPe_xop_ptr).xop_ptr)
+
+/*
+=head1 Optree Manipulation Functions
+
+=for apidoc Am|const char *|OP_NAME|OP *o
+Return the name of the provided OP. For core ops this looks up the name
+from the op_type; for custom ops from the op_ppaddr.
+
+=for apidoc Am|const char *|OP_DESC|OP *o
+Return a short description of the provided OP.
+
+=for apidoc Am|U32|OP_CLASS|OP *o
+Return the class of the provided OP: that is, which of the *OP
+structures it uses. For core ops this currently gets the information out
+of C<PL_opargs>, which does not always accurately reflect the type used.
+For custom ops the type is returned from the registration, and it is up
+to the registree to ensure it is accurate. The value returned will be
+one of the C<OA_>* constants from F<op.h>.
+
+=for apidoc Am|bool|OP_TYPE_IS|OP *o|Optype type
+Returns true if the given OP is not a C<NULL> pointer
+and if it is of the given type.
+
+The negation of this macro, C<OP_TYPE_ISNT> is also available
+as well as C<OP_TYPE_IS_NN> and C<OP_TYPE_ISNT_NN> which elide
+the NULL pointer check.
+
+=for apidoc Am|bool|OP_TYPE_IS_OR_WAS|OP *o|Optype type
+Returns true if the given OP is not a NULL pointer and
+if it is of the given type or used to be before being
+replaced by an OP of type OP_NULL.
+
+The negation of this macro, C<OP_TYPE_ISNT_AND_WASNT>
+is also available as well as C<OP_TYPE_IS_OR_WAS_NN>
+and C<OP_TYPE_ISNT_AND_WASNT_NN> which elide
+the C<NULL> pointer check.
+
+=for apidoc Am|bool|OpHAS_SIBLING|OP *o
+Returns true if C<o> has a sibling
+
+=for apidoc Am|OP*|OpSIBLING|OP *o
+Returns the sibling of C<o>, or C<NULL> if there is no sibling
+
+=for apidoc Am|void|OpMORESIB_set|OP *o|OP *sib
+Sets the sibling of C<o> to the non-zero value C<sib>. See also C<L</OpLASTSIB_set>>
+and C<L</OpMAYBESIB_set>>. For a higher-level interface, see
+C<L</op_sibling_splice>>.
+
+=for apidoc Am|void|OpLASTSIB_set|OP *o|OP *parent
+Marks C<o> as having no further siblings. On C<PERL_OP_PARENT> builds, marks
+o as having the specified parent. See also C<L</OpMORESIB_set>> and
+C<OpMAYBESIB_set>. For a higher-level interface, see
+C<L</op_sibling_splice>>.
+
+=for apidoc Am|void|OpMAYBESIB_set|OP *o|OP *sib|OP *parent
+Conditionally does C<OpMORESIB_set> or C<OpLASTSIB_set> depending on whether
+C<sib> is non-null. For a higher-level interface, see C<L</op_sibling_splice>>.
+
+=cut
+*/
+
+#define OP_NAME(o) ((o)->op_type == OP_CUSTOM \
+ ? XopENTRYCUSTOM(o, xop_name) \
+ : PL_op_name[(o)->op_type])
+#define OP_DESC(o) ((o)->op_type == OP_CUSTOM \
+ ? XopENTRYCUSTOM(o, xop_desc) \
+ : PL_op_desc[(o)->op_type])
+#define OP_CLASS(o) ((o)->op_type == OP_CUSTOM \
+ ? XopENTRYCUSTOM(o, xop_class) \
+ : (PL_opargs[(o)->op_type] & OA_CLASS_MASK))
+
+#define OP_TYPE_IS(o, type) ((o) && (o)->op_type == (type))
+#define OP_TYPE_IS_NN(o, type) ((o)->op_type == (type))
+#define OP_TYPE_ISNT(o, type) ((o) && (o)->op_type != (type))
+#define OP_TYPE_ISNT_NN(o, type) ((o)->op_type != (type))
+
+#define OP_TYPE_IS_OR_WAS_NN(o, type) \
+ ( ((o)->op_type == OP_NULL \
+ ? (o)->op_targ \
+ : (o)->op_type) \
+ == (type) )
+
+#define OP_TYPE_IS_OR_WAS(o, type) \
+ ( (o) && OP_TYPE_IS_OR_WAS_NN(o, type) )
+
+#define OP_TYPE_ISNT_AND_WASNT_NN(o, type) \
+ ( ((o)->op_type == OP_NULL \
+ ? (o)->op_targ \
+ : (o)->op_type) \
+ != (type) )
+
+#define OP_TYPE_ISNT_AND_WASNT(o, type) \
+ ( (o) && OP_TYPE_ISNT_AND_WASNT_NN(o, type) )
+
+
+#ifdef PERL_OP_PARENT
+# define OpHAS_SIBLING(o) (cBOOL((o)->op_moresib))
+# define OpSIBLING(o) (0 + (o)->op_moresib ? (o)->op_sibparent : NULL)
+# define OpMORESIB_set(o, sib) ((o)->op_moresib = 1, (o)->op_sibparent = (sib))
+# define OpLASTSIB_set(o, parent) \
+ ((o)->op_moresib = 0, (o)->op_sibparent = (parent))
+# define OpMAYBESIB_set(o, sib, parent) \
+ ((o)->op_sibparent = ((o)->op_moresib = cBOOL(sib)) ? (sib) : (parent))
+#else
+# define OpHAS_SIBLING(o) (cBOOL((o)->op_sibling))
+# define OpSIBLING(o) (0 + (o)->op_sibling)
+# define OpMORESIB_set(o, sib) ((o)->op_moresib = 1, (o)->op_sibling = (sib))
+# define OpLASTSIB_set(o, parent) \
+ ((o)->op_moresib = 0, (o)->op_sibling = NULL)
+# define OpMAYBESIB_set(o, sib, parent) \
+ ((o)->op_moresib = cBOOL(sib), (o)->op_sibling = (sib))
+#endif
+
+#if !defined(PERL_CORE) && !defined(PERL_EXT)
+/* for backwards compatibility only */
+# define OP_SIBLING(o) OpSIBLING(o)
#endif
+#define newATTRSUB(f, o, p, a, b) Perl_newATTRSUB_x(aTHX_ f, o, p, a, b, FALSE)
+#define newSUB(f, o, p, b) newATTRSUB((f), (o), (p), NULL, (b))
+
/*
- * Values that can be held by mad_key :
- * ^ unfilled head spot
- * , literal ,
- * ; literal ; (blank if implicit ; at end of block)
- * : literal : from ?: or attr list
- * + unary +
- * ? literal ? from ?:
- * ( literal (
- * ) literal )
- * [ literal [
- * ] literal ]
- * { literal {
- * } literal }
- * @ literal @ sigil
- * $ literal $ sigil
- * * literal * sigil
- * ! use is source filtered
- * & & or sub
- * # whitespace/comment following ; or }
- * # $# sigil
- * 1 1st ; from for(;;)
- * 1 retired protasis
- * 2 2nd ; from for(;;)
- * 2 retired apodosis
- * 3 C-style for list
- * a sub or var attributes
- * a non-method arrow operator
- * A method arrow operator
- * A use import args
- * b format block
- * B retired stub block
- * C constant conditional op
- * d declarator
- * D do block
- * e unreached "else" (see C)
- * e expression producing E
- * E tr/E/R/, /E/
- * f folded constant op
- * F peg op for format
- * g op was forced to be a word
- * i if/unless modifier
- * I if/elsif/unless statement
- * k local declarator
- * K retired kid op
- * l last index of array ($#foo)
- * L label
- * m modifier on regex
- * n sub or format name
- * o current operator/declarator name
- * o else/continue
- * O generic optimized op
- * p peg to hold extra whitespace at statement level
- * P peg op for package declaration
- * q opening quote
- * = quoted material
- * Q closing quote
- * Q optimized qw//
- * r expression producing R
- * R tr/E/R/ s/E/R/
- * s sub signature
- * S use import stub (no import)
- * S retired sort block
- * t unreached "then" (see C)
- * U use import op
- * v private sv of for loop
- * V use version
- * w while/until modifier
- * W while/for statement
- * x optimized qw
- * X random thing
- * _ whitespace/comments preceding anything else
- * ~ =~ operator
- */
+=head1 Hook manipulation
+*/
+
+#ifdef USE_ITHREADS
+# define OP_CHECK_MUTEX_INIT MUTEX_INIT(&PL_check_mutex)
+# define OP_CHECK_MUTEX_LOCK MUTEX_LOCK(&PL_check_mutex)
+# define OP_CHECK_MUTEX_UNLOCK MUTEX_UNLOCK(&PL_check_mutex)
+# define OP_CHECK_MUTEX_TERM MUTEX_DESTROY(&PL_check_mutex)
+#else
+# define OP_CHECK_MUTEX_INIT NOOP
+# define OP_CHECK_MUTEX_LOCK NOOP
+# define OP_CHECK_MUTEX_UNLOCK NOOP
+# define OP_CHECK_MUTEX_TERM NOOP
+#endif
+
+
+/* Stuff for OP_MULTDEREF/pp_multideref. */
+
+/* actions */
+
+/* Load another word of actions/flag bits. Must be 0 */
+#define MDEREF_reload 0
+
+#define MDEREF_AV_pop_rv2av_aelem 1
+#define MDEREF_AV_gvsv_vivify_rv2av_aelem 2
+#define MDEREF_AV_padsv_vivify_rv2av_aelem 3
+#define MDEREF_AV_vivify_rv2av_aelem 4
+#define MDEREF_AV_padav_aelem 5
+#define MDEREF_AV_gvav_aelem 6
+
+#define MDEREF_HV_pop_rv2hv_helem 8
+#define MDEREF_HV_gvsv_vivify_rv2hv_helem 9
+#define MDEREF_HV_padsv_vivify_rv2hv_helem 10
+#define MDEREF_HV_vivify_rv2hv_helem 11
+#define MDEREF_HV_padhv_helem 12
+#define MDEREF_HV_gvhv_helem 13
+
+#define MDEREF_ACTION_MASK 0xf
+
+/* key / index type */
+
+#define MDEREF_INDEX_none 0x00 /* run external ops to generate index */
+#define MDEREF_INDEX_const 0x10 /* index is const PV/UV */
+#define MDEREF_INDEX_padsv 0x20 /* index is lexical var */
+#define MDEREF_INDEX_gvsv 0x30 /* index is GV */
+
+#define MDEREF_INDEX_MASK 0x30
+
+/* bit flags */
+
+#define MDEREF_FLAG_last 0x40 /* the last [ah]elem; PL_op flags apply */
+
+#define MDEREF_MASK 0x7F
+#define MDEREF_SHIFT 7
+
+#if defined(PERL_IN_DOOP_C) || defined(PERL_IN_PP_C)
+static const char * const deprecated_above_ff_msg
+ = "Use of strings with code points over 0xFF as arguments to "
+ "%s operator is deprecated";
+#endif
+
/*
- * Local variables:
- * c-indentation-style: bsd
- * c-basic-offset: 4
- * indent-tabs-mode: t
- * End:
- *
- * ex: set ts=8 sts=4 sw=4 noet:
+ * ex: set ts=8 sts=4 sw=4 et:
*/
https://perl5.git.perl.org / perl5.git / blobdiff