=head1 SYNOPSIS
-The basic steps to build and install perl5 on a Unix system are:
+First, make sure you are installing an up-to-date version of Perl. If
+you didn't get your Perl source from CPAN, check the latest version at
+<URL:http://www.cpan.org/src/>.
+
+The basic steps to build and install perl5 on a Unix system
+with all the defaults are:
rm -f config.sh Policy.sh
- sh Configure
+ sh Configure -de
make
make test
make install
Each of these is explained in further detail below.
-For information on non-Unix systems, see the section on
-L<"Porting information"> below.
+B<NOTE>: starting from the release 5.6.0 Perl will use a version
+scheme where even-numbered subreleases (like 5.6) are stable
+maintenance releases and odd-numbered subreleases (like 5.7) are
+unstable development releases. Development releases should not be
+used in production environments. Fixes and new features are first
+carefully tested in development releases and only if they prove
+themselves to be worthy will they be migrated to the maintenance
+releases.
+
+The above commands will install Perl to /usr/local or /opt, depending
+on the platform. If that's not okay with you, use
+
+ rm -f config.sh Policy.sh
+ sh Configure
+ make
+ make test
+ make install
+
+For information on non-Unix systems, see the section on L<"Porting
+information"> below.
+
+If "make install" just says "`install' is up to date" or something
+similar, you may be on case-preserving filesystems such as Mac's HFS+
+and you should say "make install-all". (This confusion brought to you
+by the Perl distribution having a file called INSTALL.)
+
+If you have problems, corrections, or questions, please see
+L<"Reporting Problems"> below.
For information on what's new in this release, see the
pod/perldelta.pod file. For more detailed information about specific
C<code> literal code
L<name> A link (cross reference) to name
-You should probably at least skim through this entire document before
+Although most of the defaults are probably fine for most users,
+you should probably at least skim through this entire document before
proceeding.
If you're building Perl on a non-Unix system, you should also read
the README file specific to your operating system, since this may
-provide additional or different instructions for building Perl.
+provide additional or different instructions for building Perl. There
+are also README files for several flavors of Unix systems, such as
+Solaris, HP-UX, and AIX; if you have one of those systems, you should
+also read the README file specific to that system.
If there is a hint file for your system (in the hints/ directory) you
should also read that hint file for specific information for your
-system. (Unixware users should use the svr4.sh hint file.)
+system. (Unixware users should use the svr4.sh hint file.) If
+there is a README file for your platform, then you should read
+that too. Additional information is in the Porting/ directory.
+
+=head1 WARNING: This version requires an extra step to build old extensions.
+
+5.005_53 and later releases do not export unadorned
+global symbols anymore. This means you may need to build older
+extensions that have not been updated for the new naming convention
+with:
+
+ perl Makefile.PL POLLUTE=1
-=head1 NOTE: This version is not binary compatible with Perl 5.004.
+Alternatively, you can enable CPP symbol pollution wholesale by
+building perl itself with:
-For Perl 5.004 it was possible to be binary compatible with 5.003.
-Starting from Perl 5.004_50 this is no longer possible because there were
-many deep and far-reaching changes to the language internals.
+ sh Configure -Accflags=-DPERL_POLLUTE
-If you have dynamically loaded extensions that you built under perl
-5.003 or 5.004 and the so-called 'bincompat3' mode (the default mode)
-and that you wish to continue to use with perl 5.005, you may need to
-reinstall the extensions. If you wish to continue to support both 5.004
-and 5.005 on your system, you will have to move the 5.004 extensions
-over to the 5.004 architecture-dependent library. See the discussion
-below on L<"Coexistence with earlier versions of perl5.">
+pod/perldelta.pod contains more details about this.
+
+=head1 WARNING: This version may not be binary compatible with Perl 5.005.
+
+Using the default Configure options for building perl should get you
+a perl that will be binary compatible with the 5.005 release.
+
+However, if you run Configure with any custom options, such as
+-Dusethreads, -Dusemultiplicity, -Dusemymalloc, -Ubincompat5005 etc.,
+the resulting perl will not be binary compatible. Under these
+circumstances, if you have dynamically loaded extensions that were
+built under perl 5.005, you will need to rebuild and reinstall all
+those extensions to use them with 5.6.
+
+Pure perl modules without XS or C code should continue to work fine
+without reinstallation. See the discussions below on
+L<"Coexistence with earlier versions of perl5"> and
+L<"Upgrading from 5.005 to 5.6"> for more details.
The standard extensions supplied with Perl will be handled automatically.
-In a related issue, old extensions may possibly be affected by the
+On a related issue, old modules may possibly be affected by the
changes in the Perl language in the current release. Please see
-pod/perldelta.pod for a description of what's changed.
+pod/perldelta.pod (and pod/perl500Xdelta.pod) for a description of
+what's changed. See your installed copy of the perllocal.pod
+file for a (possibly incomplete) list of locally installed modules.
+Also see CPAN::autobundle for one way to make a "bundle" of your
+currently installed modules.
+
+=head1 WARNING: This version requires a compiler that supports ANSI C.
+
+Most C compilers are now ANSI-compliant. However, a few current
+computers are delivered with an older C compiler expressly for
+rebuilding the system kernel, or for some other historical reason.
+Alternatively, you may have an old machine which was shipped before
+ANSI compliance became widespread. Such compilers are not suitable
+for building Perl.
+
+If you find that your default C compiler is not ANSI-capable, but you
+know that an ANSI-capable compiler is installed on your system, you
+can tell F<Configure> to use the correct compiler by means of the
+C<-Dcc=> command-line option -- see L<"gcc">.
+
+If do not have an ANSI-capable compiler there are several avenues open
+to you:
+
+=over 4
+
+=item *
+
+You may try obtaining GCC, available from GNU mirrors worldwide,
+listed at <URL:http://www.gnu.org/order/ftp.html>. If, rather than
+building gcc from source code, you locate a binary version configured
+for your platform, be sure that it is compiled for the version of the
+operating system that you are using.
+
+=item *
+
+You may purchase a commercial ANSI C compiler from your system
+supplier or elsewhere. (Or your organization may already have
+licensed such software -- ask your colleagues to find out how to
+access it.) If there is a README file for your system in the Perl
+distribution (for example, F<README.hpux>), it may contain advice on
+suitable compilers.
+
+=item *
+
+Another alternative may be to use a tool like ansi2knr to convert the
+sources back to K&R style, but there is no guarantee this route will get
+you anywhere, since the prototypes are not the only ANSI features used
+in the Perl sources. ansi2knr is usually found as part of the freely
+available Ghostscript distribution. Another similar tool is
+unprotoize, distributed with GCC. Since unprotoize requires GCC to
+run, you may have to run it on a platform where GCC is available, and move
+the sources back to the platform without GCC.
+
+If you succeed in automatically converting the sources to a K&R compatible
+form, be sure to email perlbug@perl.org to let us know the steps you
+followed. This will enable us to officially support this option.
+
+=back
+
+Although Perl can be compiled using a C++ compiler, the Configure script
+does not work with some C++ compilers.
=head1 Space Requirements
-The complete perl5 source tree takes up about 10 MB of disk space. The
-complete tree after completing make takes roughly 20 MB, though the
-actual total is likely to be quite system-dependent. The installation
-directories need something on the order of 10 MB, though again that
+The complete perl5 source tree takes up about 40 MB of disk space.
+After completing make, it takes up roughly 60 MB, though the actual
+total is likely to be quite system-dependent. The installation
+directories need something on the order of 35 MB, though again that
value is system-dependent.
=head1 Start with a Fresh Distribution
files. If you are upgrading from a previous version of perl, or if you
change systems or compilers or make other significant changes, or if
you are experiencing difficulties building perl, you should probably
-not re-use your old config.sh. Simply remove it or rename it, e.g.
+not re-use your old config.sh. Simply remove it
- mv config.sh config.sh.old
+ rm -f config.sh
If you wish to use your old config.sh, be especially attentive to the
version and architecture-specific questions and answers. For example,
Similarly, if you used a shared libperl.so (see below) with version
numbers, you will probably want to adjust them as well.
-Also, be careful to check your architecture name. Some Linux systems
-(such as Debian) use i386, while others may use i486 or i586. If you
-pick up a precompiled binary, it might not use the same name.
+Also, be careful to check your architecture name. For example, some
+Linux distributions use i386, while others may use i486. If you build
+it yourself, Configure uses the output of the arch command, which
+might be i586 or i686 instead. If you pick up a precompiled binary, or
+compile extensions on different systems, they might not all agree on
+the architecture name.
In short, if you wish to use your old config.sh, I recommend running
Configure interactively rather than blindly accepting the defaults.
-If your reason to reuse your old config.sh is to save your
-particular installation choices, then you can probably achieve the
-same effect by using the new Policy.sh file. See the section on
-L<"Site-wide Policy settings"> below.
+If your reason to reuse your old config.sh is to save your particular
+installation choices, then you can probably achieve the same effect by
+using the Policy.sh file. See the section on L<"Site-wide Policy
+settings"> below. If you wish to start with a fresh distribution, you
+also need to remove any old Policy.sh files you may have with
+
+ rm -f Policy.sh
=head1 Run Configure
Configure will figure out various things about your system. Some
things Configure will figure out for itself, other things it will ask
-you about. To accept the default, just press RETURN. The default
-is almost always okay. At any Configure prompt, you can type &-d
-and Configure will use the defaults from then on.
+you about. To accept the default, just press RETURN. The default is
+almost always okay. It is normal for some things to be "NOT found",
+since Configure often searches for many different ways of performing
+the same function.
+
+At any Configure prompt, you can type &-d and Configure will use the
+defaults from then on.
After it runs, Configure will perform variable substitution on all the
*.SH files and offer to run make depend.
+=head2 Altering config.sh variables for C compiler switches etc.
+
+For most users, all of the Configure defaults are fine. Configure
+also has several convenient options which are all described below.
+However, if Configure doesn't have an option to do what you want,
+you can change Configure variables after the platform hints have been
+run, by using Configure's -A switch. For example, here's how to add
+a couple of extra flags to C compiler invocations:
+
+ sh Configure -Accflags="-DPERL_Y2KWARN -DPERL_POLLUTE_MALLOC"
+
+For more help on Configure switches, run:
+
+ sh Configure -h
+
+=head2 Building Perl outside of the source directory
+
+Sometimes it is desirable to build Perl in a directory different from
+where the sources are, for example if you want to keep your sources
+read-only, or if you want to share the sources between different binary
+architectures.
+
+Starting from Perl 5.6.1 you can do this (if your file system supports
+symbolic links) by
+
+ mkdir /tmp/perl/build/directory
+ cd /tmp/perl/build/directory
+ sh /path/to/perl/source/Configure -Dmksymlinks ...
+
+This will create in /tmp/perl/build/directory a tree of symbolic links
+pointing to files in /path/to/perl/source. The original files are left
+unaffected. After Configure has finished you can just say
+
+ make all test
+
+and Perl will be built and tested, all in /tmp/perl/build/directory.
+
+=head2 Common Configure options
+
Configure supports a number of useful options. Run B<Configure -h> to
get a listing. See the Porting/Glossary file for a complete list of
Configure variables you can set and their definitions.
-To compile with gcc, for example, you should run
+=over 4
+
+=item gcc
+
+To compile with gcc you should run
sh Configure -Dcc=gcc
This is the preferred way to specify gcc (or another alternative
compiler) so that the hints files can set appropriate defaults.
-If you want to use your old config.sh but override some of the items
-with command line options, you need to use B<Configure -O>.
+=item Installation prefix
By default, for most systems, perl will be installed in
-/usr/local/{bin, lib, man}. You can specify a different 'prefix' for
-the default installation directory, when Configure prompts you or by
-using the Configure command line option -Dprefix='/some/directory',
-e.g.
+/usr/local/{bin, lib, man}. (See L<"Installation Directories">
+and L<"Coexistence with earlier versions of perl5"> below for
+further details.)
+
+You can specify a different 'prefix' for the default installation
+directory, when Configure prompts you or by using the Configure command
+line option -Dprefix='/some/directory', e.g.
sh Configure -Dprefix=/opt/perl
-If your prefix contains the string "perl", then the directories
-are simplified. For example, if you use prefix=/opt/perl,
-then Configure will suggest /opt/perl/lib instead of
-/opt/perl/lib/perl5/.
+If your prefix contains the string "perl", then the suggested
+directory structure is simplified. For example, if you use
+prefix=/opt/perl, then Configure will suggest /opt/perl/lib instead of
+/opt/perl/lib/perl5/. Again, see L<"Installation Directories"> below
+for more details.
+
+NOTE: You must not specify an installation directory that is the same
+as or below your perl source directory. If you do, installperl will
+attempt infinite recursion.
+
+=item /usr/bin/perl
+
+It may seem obvious, but Perl is useful only when users can easily
+find it. It's often a good idea to have both /usr/bin/perl and
+/usr/local/bin/perl be symlinks to the actual binary. Be especially
+careful, however, not to overwrite a version of perl supplied by your
+vendor unless you are sure you know what you are doing.
-NOTE: You must not specify an installation directory that is below
-your perl source directory. If you do, installperl will attempt
-infinite recursion.
+By default, Configure will arrange for /usr/bin/perl to be linked to
+the current version of perl. You can turn off that behavior by running
-It may seem obvious to say, but Perl is useful only when users can
-easily find it. When possible, it's good for both /usr/bin/perl and
-/usr/local/bin/perl to be symlinks to the actual binary. If that can't
-be done, system administrators are strongly encouraged to put
-(symlinks to) perl and its accompanying utilities, such as perldoc,
+ Configure -Uinstallusrbinperl
+
+or by answering 'no' to the appropriate Configure prompt.
+
+In any case, system administrators are strongly encouraged to
+put (symlinks to) perl and its accompanying utilities, such as perldoc,
into a directory typically found along a user's PATH, or in another
obvious and convenient place.
-By default, Configure will compile perl to use dynamic loading if
-your system supports it. If you want to force perl to be compiled
-statically, you can either choose this when Configure prompts you or
-you can use the Configure command line option -Uusedl.
+=item Overriding an old config.sh
+
+If you want to use your old config.sh but override some of the items
+with command line options, you need to use B<Configure -O>.
+
+=back
If you are willing to accept all the defaults, and you want terse
output, you can run
sh Configure -des
-For my Solaris system, I usually use
+Note: for development releases (odd subreleases, like 5.7, as opposed
+to maintenance releases which have even subreleases, like 5.6)
+if you want to use Configure -d, you will also need to supply -Dusedevel
+to Configure, because the default answer to the question "do you really
+want to Configure a development version?" is "no". The -Dusedevel
+skips that sanity check.
+
+For example for my Solaris system, I usually use
sh Configure -Dprefix=/opt/perl -Doptimize='-xpentium -xO4' -des
for a listing.
-Cross compiling is not supported.
+Cross compiling and compiling in a different directory are not supported.
(The file is called configure.gnu to avoid problems on systems
that would not distinguish the files "Configure" and "configure".)
-=head2 Extensions
-
-By default, Configure will offer to build every extension which appears
-to be supported. For example, Configure will offer to build GDBM_File
-only if it is able to find the gdbm library. (See examples below.)
-B, DynaLoader, Fcntl, IO, and attrs are always built by default.
-Configure does not contain code to test for POSIX compliance, so POSIX
-is always built by default as well. If you wish to skip POSIX, you can
-set the Configure variable useposix=false either in a hint file or from
-the Configure command line. Similarly, the Opcode extension is always
-built by default, but you can skip it by setting the Configure variable
-useopcode=false either in a hint file for from the command line.
-
-You can learn more about each of these extensions by consulting the
-documentation in the individual .pm modules, located under the
-ext/ subdirectory.
-
-Even if you do not have dynamic loading, you must still build the
-DynaLoader extension; you should just build the stub dl_none.xs
-version. (Configure will suggest this as the default.)
-
-In summary, here are the Configure command-line variables you can set
-to turn off each extension:
-
- B (Always included by default)
- DB_File i_db
- DynaLoader (Must always be included as a static extension)
- Fcntl (Always included by default)
- GDBM_File i_gdbm
- IO (Always included by default)
- NDBM_File i_ndbm
- ODBM_File i_dbm
- POSIX useposix
- SDBM_File (Always included by default)
- Opcode useopcode
- Socket d_socket
- Threads usethreads
- attrs (Always included by default)
-
-Thus to skip the NDBM_File extension, you can use
-
- sh Configure -Ui_ndbm
-
-Again, this is taken care of automatically if you don't have the ndbm
-library.
-
-Of course, you may always run Configure interactively and select only
-the extensions you want.
-
-Note: The DB_File module will only work with version 1.x of Berkeley
-DB or newer releases of version 2. Configure will automatically detect
-this for you and refuse to try to build DB_File with version 2.
-
-If you re-use your old config.sh but change your system (e.g. by
-adding libgdbm) Configure will still offer your old choices of extensions
-for the default answer, but it will also point out the discrepancy to
-you.
-
-Finally, if you have dynamic loading (most modern Unix systems do)
-remember that these extensions do not increase the size of your perl
-executable, nor do they impact start-up time, so you probably might as
-well build all the ones that will work on your system.
-
-=head2 Including locally-installed libraries
-
-Perl5 comes with interfaces to number of database extensions, including
-dbm, ndbm, gdbm, and Berkeley db. For each extension, if
-Configure can find the appropriate header files and libraries, it will
-automatically include that extension. The gdbm and db libraries
-are not included with perl. See the library documentation for
-how to obtain the libraries.
-
-Note: If your database header (.h) files are not in a
-directory normally searched by your C compiler, then you will need to
-include the appropriate -I/your/directory option when prompted by
-Configure. If your database library (.a) files are not in a directory
-normally searched by your C compiler and linker, then you will need to
-include the appropriate -L/your/directory option when prompted by
-Configure. See the examples below.
-
-=head2 Examples
-
-=over 4
-
-=item gdbm in /usr/local
-
-Suppose you have gdbm and want Configure to find it and build the
-GDBM_File extension. This examples assumes you have gdbm.h
-installed in /usr/local/include/gdbm.h and libgdbm.a installed in
-/usr/local/lib/libgdbm.a. Configure should figure all the
-necessary steps out automatically.
-
-Specifically, when Configure prompts you for flags for
-your C compiler, you should include -I/usr/local/include.
-
-When Configure prompts you for linker flags, you should include
--L/usr/local/lib.
-
-If you are using dynamic loading, then when Configure prompts you for
-linker flags for dynamic loading, you should again include
--L/usr/local/lib.
-
-Again, this should all happen automatically. If you want to accept the
-defaults for all the questions and have Configure print out only terse
-messages, then you can just run
-
- sh Configure -des
-
-and Configure should include the GDBM_File extension automatically.
-
-This should actually work if you have gdbm installed in any of
-(/usr/local, /opt/local, /usr/gnu, /opt/gnu, /usr/GNU, or /opt/GNU).
-
-=item gdbm in /usr/you
-
-Suppose you have gdbm installed in some place other than /usr/local/,
-but you still want Configure to find it. To be specific, assume you
-have /usr/you/include/gdbm.h and /usr/you/lib/libgdbm.a. You
-still have to add -I/usr/you/include to cc flags, but you have to take
-an extra step to help Configure find libgdbm.a. Specifically, when
-Configure prompts you for library directories, you have to add
-/usr/you/lib to the list.
-
-It is possible to specify this from the command line too (all on one
-line):
-
- sh Configure -des \
- -Dlocincpth="/usr/you/include" \
- -Dloclibpth="/usr/you/lib"
-
-locincpth is a space-separated list of include directories to search.
-Configure will automatically add the appropriate -I directives.
-
-loclibpth is a space-separated list of library directories to search.
-Configure will automatically add the appropriate -L directives. If
-you have some libraries under /usr/local/ and others under
-/usr/you, then you have to include both, namely
-
- sh Configure -des \
- -Dlocincpth="/usr/you/include /usr/local/include" \
- -Dloclibpth="/usr/you/lib /usr/local/lib"
-
-=back
-
=head2 Installation Directories
The installation directories can all be changed by answering the
appropriate questions in Configure. For convenience, all the
installation questions are near the beginning of Configure.
+Further, there are a number of additions to the installation
+directories since 5.005, so reusing your old config.sh may not
+be sufficient to put everything where you want it.
I highly recommend running Configure interactively to be sure it puts
everything where you want it. At any point during the Configure
-process, you can answer a question with &-d and Configure
-will use the defaults from then on.
+process, you can answer a question with &-d and Configure will use
+the defaults from then on.
-By default, Configure uses the following directories for
-library files (archname is a string like sun4-sunos, determined
-by Configure)
+The defaults are intended to be reasonable and sensible for most
+people building from sources. Those who build and distribute binary
+distributions or who export perl to a range of systems will probably
+need to alter them. If you are content to just accept the defaults,
+you can safely skip the next section.
- /usr/local/lib/perl5/archname/5.004
- /usr/local/lib/perl5/
- /usr/local/lib/perl5/site_perl/archname
- /usr/local/lib/perl5/site_perl
+The directories set up by Configure fall into three broad categories.
-and the following directories for manual pages:
-
- /usr/local/man/man1
- /usr/local/lib/perl5/man/man3
+=over 4
-(Actually, Configure recognizes the SVR3-style
+=item Directories for the perl distribution
+
+By default, Configure will use the following directories for 5.6.0.
+$version is the full perl version number, including subversion, e.g.
+5.6.0 or 5.6.1, and $archname is a string like sun4-sunos,
+determined by Configure. The full definitions of all Configure
+variables are in the file Porting/Glossary.
+
+ Configure variable Default value
+ $prefix /usr/local
+ $bin $prefix/bin
+ $scriptdir $prefix/bin
+ $privlib $prefix/lib/perl5/$version
+ $archlib $prefix/lib/perl5/$version/$archname
+ $man1dir $prefix/man/man1
+ $man3dir $prefix/man/man3
+ $html1dir (none)
+ $html3dir (none)
+
+Actually, Configure recognizes the SVR3-style
/usr/local/man/l_man/man1 directories, if present, and uses those
-instead.)
+instead. Also, if $prefix contains the string "perl", the library
+directories are simplified as described below. For simplicity, only
+the common style is shown here.
+
+=item Directories for site-specific add-on files
+
+After perl is installed, you may later wish to add modules (e.g. from
+CPAN) or scripts. Configure will set up the following directories to
+be used for installing those add-on modules and scripts.
+
+ Configure variable Default value
+ $siteprefix $prefix
+ $sitebin $siteprefix/bin
+ $sitescript $siteprefix/bin
+ $sitelib $siteprefix/lib/perl5/site_perl/$version
+ $sitearch $siteprefix/lib/perl5/site_perl/$version/$archname
+ $siteman1 $siteprefix/man/man1
+ $siteman3 $siteprefix/man/man3
+ $sitehtml1 (none)
+ $sitehtml3 (none)
+
+By default, ExtUtils::MakeMaker will install architecture-independent
+modules into $sitelib and architecture-dependent modules into $sitearch.
+
+NOTE: As of 5.6.0, ExtUtils::MakeMaker will use $sitelib and $sitearch,
+but will not use the other site-specific directories. Volunteers to
+fix this are needed.
+
+=item Directories for vendor-supplied add-on files
+
+Lastly, if you are building a binary distribution of perl for
+distribution, Configure can optionally set up the following directories
+for you to use to distribute add-on modules.
+
+ Configure variable Default value
+ $vendorprefix (none)
+ (The next ones are set only if vendorprefix is set.)
+ $vendorbin $vendorprefix/bin
+ $vendorscript $vendorprefix/bin
+ $vendorlib $vendorprefix/lib/perl5/vendor_perl/$version
+ $vendorarch $vendorprefix/lib/perl5/vendor_perl/$version/$archname
+ $vendorman1 $vendorprefix/man/man1
+ $vendorman3 $vendorprefix/man/man3
+ $vendorhtml1 (none)
+ $vendorhtml3 (none)
+
+These are normally empty, but may be set as needed. For example,
+a vendor might choose the following settings:
+
+ $prefix /usr/bin
+ $siteprefix /usr/local/bin
+ $vendorprefix /usr/bin
+
+This would have the effect of setting the following:
+
+ $bin /usr/bin
+ $scriptdir /usr/bin
+ $privlib /usr/lib/perl5/$version
+ $archlib /usr/lib/perl5/$version/$archname
+ $man1dir /usr/man/man1
+ $man3dir /usr/man/man3
+
+ $sitebin /usr/local/bin
+ $sitescript /usr/local/bin
+ $sitelib /usr/local/lib/perl5/site_perl/$version
+ $sitearch /usr/local/lib/perl5/site_perl/$version/$archname
+ $siteman1 /usr/local/man/man1
+ $siteman3 /usr/local/man/man3
+
+ $vendorbin /usr/bin
+ $vendorscript /usr/bin
+ $vendorlib /usr/lib/perl5/vendor_perl/$version
+ $vendorarch /usr/lib/perl5/vendor_perl/$version/$archname
+ $vendorman1 /usr/man/man1
+ $vendorman3 /usr/man/man3
+
+Note how in this example, the vendor-supplied directories are in the
+/usr hierarchy, while the directories reserved for the end-user are in
+the /usr/local hierarchy.
+
+NOTE: As of 5.6.0, ExtUtils::MakeMaker does not use these directories.
+Volunteers to fix this are needed.
+
+The entire installed library hierarchy is installed in locations with
+version numbers, keeping the installations of different versions distinct.
+However, later installations of Perl can still be configured to search the
+installed libraries corresponding to compatible earlier versions.
+See L<"Coexistence with earlier versions of perl5"> below for more details
+on how Perl can be made to search older version directories.
+
+Of course you may use these directories however you see fit. For
+example, you may wish to use $siteprefix for site-specific files that
+are stored locally on your own disk and use $vendorprefix for
+site-specific files that are stored elsewhere on your organization's
+network. One way to do that would be something like
+
+ sh Configure -Dsiteprefix=/usr/local -Dvendorprefix=/usr/share/perl
+
+=item otherlibdirs
+
+As a final catch-all, Configure also offers an $otherlibdirs
+variable. This variable contains a colon-separated list of additional
+directories to add to @INC. By default, it will be empty.
+Perl will search these directories (including architecture and
+version-specific subdirectories) for add-on modules and extensions.
+
+=item APPLLIB_EXP
+
+There is one other way of adding paths to @INC at perl build time, and
+that is by setting the APPLLIB_EXP C pre-processor token to a colon-
+separated list of directories, like this
+
+ sh Configure -Accflags='-DAPPLLIB_EXP=\"/usr/libperl\"'
+
+The directories defined by APPLLIB_EXP get added to @INC I<first>,
+ahead of any others, and so provide a way to override the standard perl
+modules should you, for example, want to distribute fixes without
+touching the perl distribution proper. And, like otherlib dirs,
+version and architecture specific subdirectories are also searched, if
+present, at run time. Of course, you can still search other @INC
+directories ahead of those in APPLLIB_EXP by using any of the standard
+run-time methods: $PERLLIB, $PERL5LIB, -I, use lib, etc.
+
+=item Man Pages
+
+In versions 5.005_57 and earlier, the default was to store module man
+pages in a version-specific directory, such as
+/usr/local/lib/perl5/$version/man/man3. The default for 5.005_58 and
+after is /usr/local/man/man3 so that most users can find the man pages
+without resetting MANPATH.
+
+You can continue to use the old default from the command line with
+
+ sh Configure -Dman3dir=/usr/local/lib/perl5/5.6.0/man/man3
-The module man pages are stuck in that strange spot so that
-they don't collide with other man pages stored in /usr/local/man/man3,
-and so that Perl's man pages don't hide system man pages. On some
-systems, B<man less> would end up calling up Perl's less.pm module man
-page, rather than the less program. (This default location will likely
-change to /usr/local/man/man3 in a future release of perl.)
+Some users also prefer to use a .3pm suffix. You can do that with
-Note: Many users prefer to store the module man pages in
-/usr/local/man/man3. You can do this from the command line with
+ sh Configure -Dman3ext=3pm
- sh Configure -Dman3dir=/usr/local/man/man3
+Again, these are just the defaults, and can be changed as you run
+Configure.
-Some users also prefer to use a .3pm suffix. You can do that with
+=item HTML pages
- sh Configure -Dman3ext=3pm
+As of perl5.005_57, the standard perl installation does not do
+anything with HTML documentation, but that may change in the future.
+Further, some add-on modules may wish to install HTML documents. The
+html Configure variables listed above are provided if you wish to
+specify where such documents should be placed. The default is "none",
+but will likely eventually change to something useful based on user
+feedback.
-If you specify a prefix that contains the string "perl", then the
-directory structure is simplified. For example, if you Configure with
--Dprefix=/opt/perl, then the defaults are
+=back
- /opt/perl/lib/archname/5.004
- /opt/perl/lib
- /opt/perl/lib/site_perl/archname
- /opt/perl/lib/site_perl
+Some users prefer to append a "/share" to $privlib and $sitelib
+to emphasize that those directories can be shared among different
+architectures.
- /opt/perl/man/man1
- /opt/perl/man/man3
+Note that these are just the defaults. You can actually structure the
+directories any way you like. They don't even have to be on the same
+filesystem.
-The perl executable will search the libraries in the order given
-above.
+Further details about the installation directories, maintenance and
+development subversions, and about supporting multiple versions are
+discussed in L<"Coexistence with earlier versions of perl5"> below.
-The directories site_perl and site_perl/archname are empty, but are
-intended to be used for installing local or site-wide extensions. Perl
-will automatically look in these directories.
+If you specify a prefix that contains the string "perl", then the
+library directory structure is slightly simplified. Instead of
+suggesting $prefix/lib/perl5/, Configure will suggest $prefix/lib.
-In order to support using things like #!/usr/local/bin/perl5.004 after
-a later version is released, architecture-dependent libraries are
-stored in a version-specific directory, such as
-/usr/local/lib/perl5/archname/5.004/.
+Thus, for example, if you Configure with
+-Dprefix=/opt/perl, then the default library directories for 5.6.0 are
-Again, these are just the defaults, and can be changed as you run
-Configure.
+ Configure variable Default value
+ $privlib /opt/perl/lib/5.6.0
+ $archlib /opt/perl/lib/5.6.0/$archname
+ $sitelib /opt/perl/lib/site_perl/5.6.0
+ $sitearch /opt/perl/lib/site_perl/5.6.0/$archname
=head2 Changing the installation directory
will eventually reside. For most sites, these two are the same; for
sites that use AFS, this distinction is handled automatically.
However, sites that use software such as depot to manage software
-packages may also wish to install perl into a different directory and
-use that management software to move perl to its final destination.
-This section describes how to do this. Someday, Configure may support
-an option -Dinstallprefix=/foo to simplify this.
+packages, or users building binary packages for distribution may also
+wish to install perl into a different directory and use that
+management software to move perl to its final destination. This
+section describes how to do that.
Suppose you want to install perl under the /tmp/perl5 directory. You
-can edit config.sh and change all the install* variables to point to
-/tmp/perl5 instead of /usr/local/wherever. Or, you can automate this
-process by placing the following lines in a file config.over before you
-run Configure (replace /tmp/perl5 by a directory of your choice):
-
- installprefix=/tmp/perl5
- test -d $installprefix || mkdir $installprefix
- test -d $installprefix/bin || mkdir $installprefix/bin
- installarchlib=`echo $installarchlib | sed "s!$prefix!$installprefix!"`
- installbin=`echo $installbin | sed "s!$prefix!$installprefix!"`
- installman1dir=`echo $installman1dir | sed "s!$prefix!$installprefix!"`
- installman3dir=`echo $installman3dir | sed "s!$prefix!$installprefix!"`
- installprivlib=`echo $installprivlib | sed "s!$prefix!$installprefix!"`
- installscript=`echo $installscript | sed "s!$prefix!$installprefix!"`
- installsitelib=`echo $installsitelib | sed "s!$prefix!$installprefix!"`
- installsitearch=`echo $installsitearch | sed "s!$prefix!$installprefix!"`
-
-Then, you can Configure and install in the usual way:
-
- sh Configure -des
- make
- make test
- make install
+could edit config.sh and change all the install* variables to point to
+/tmp/perl5 instead of /usr/local, or you could simply use the
+following command line:
+
+ sh Configure -Dinstallprefix=/tmp/perl5
+
+(replace /tmp/perl5 by a directory of your choice).
Beware, though, that if you go to try to install new add-on
-extensions, they too will get installed in under '/tmp/perl5' if you
+modules, they too will get installed in under '/tmp/perl5' if you
follow this example. The next section shows one way of dealing with
that problem.
If you need to install perl on many identical systems, it is
convenient to compile it once and create an archive that can be
-installed on multiple systems. Here's one way to do that:
+installed on multiple systems. Suppose, for example, that you want to
+create an archive that can be installed in /opt/perl.
+Here's one way to do that:
- # Set up config.over to install perl into a different directory,
+ # Set up to install perl into a different directory,
# e.g. /tmp/perl5 (see previous part).
- sh Configure -des
+ sh Configure -Dinstallprefix=/tmp/perl5 -Dprefix=/opt/perl -des
make
make test
- make install
+ make install # This will install everything into /tmp/perl5.
cd /tmp/perl5
- # Edit lib/<archname>/<version>/Config.pm to change all the
+ # Edit $archlib/Config.pm and $archlib/.packlist to change all the
# install* variables back to reflect where everything will
- # really be installed.
+ # really be installed. (That is, change /tmp/perl5 to /opt/perl
+ # everywhere in those files.)
+ # Check the scripts in $scriptdir to make sure they have the correct
+ # #!/wherever/perl line.
tar cvf ../perl5-archive.tar .
# Then, on each machine where you want to install perl,
- cd /usr/local # Or wherever you specified as $prefix
+ cd /opt/perl # Or wherever you specified as $prefix
tar xvf perl5-archive.tar
=head2 Site-wide Policy settings
Further information is in the Policy_sh.SH file itself.
+If the generated Policy.sh file is unsuitable, you may freely edit it
+to contain any valid shell commands. It will be run just after the
+platform-specific hints files.
+
+Note: Since the directory hierarchy for 5.6.0 contains a number of
+new vendor* and site* entries, your Policy.sh file will probably not
+set them to your desired values. I encourage you to run Configure
+interactively to be sure it puts things where you want them.
+
=head2 Configure-time Options
There are several different ways to Configure and build perl for your
=head2 Threads
-On some platforms, perl5.005 can be compiled to use threads. To
-enable this, read the file README.threads, and then try
+On some platforms, perl5.005 and later can be compiled with
+experimental support for threads. To enable this, read the file
+README.threads, and then try:
sh Configure -Dusethreads
The default is to compile without thread support.
+As of v5.5.64, perl has two different internal threads implementations.
+The 5.005 version (5005threads) and an interpreter-based implementation
+(ithreads) with one interpreter per thread. By default, Configure selects
+ithreads if -Dusethreads is specified. However, you can select the old
+5005threads behavior instead by either
+
+ sh Configure -Dusethreads -Duse5005threads
+
+or by
+ sh Configure -Dusethreads -Uuseithreads
+
+Eventually (by perl v5.6.0) this internal confusion ought to disappear,
+and these options may disappear as well.
+
+=head2 Large file support.
+
+Since Perl 5.6.0 Perl has supported large files (files larger than
+2 gigabytes), and in many common platforms like Linux or Solaris this
+support is on by default.
+
+This is both good and bad. It is good in that you can use large files,
+seek(), stat(), and -s them. It is bad if you are interfacing Perl
+using some extension, also the components you are connecting to must
+be large file aware: if Perl thinks files can be large but the other
+parts of the software puzzle do not understand the concept, bad things
+will happen. One popular extension suffering from this ailment is the
+Apache extension mod_perl.
+
+There's also one known limitation with the current large files
+implementation: unless you also have 64-bit integers (see the next
+section), you cannot use the printf/sprintf non-decimal integer
+formats like C<%x> to print filesizes. You can use C<%d>, though.
+
+=head2 64 bit support.
+
+If your platform does not have 64 bits natively, but can simulate them
+with compiler flags and/or C<long long> or C<int64_t>, you can build a
+perl that uses 64 bits.
+
+There are actually two modes of 64-bitness: the first one is achieved
+using Configure -Duse64bitint and the second one using Configure
+-Duse64bitall. The difference is that the first one is minimal and
+the second one maximal. The first works in more places than the second.
+
+The C<use64bitint> does only as much as is required to get 64-bit
+integers into Perl (this may mean, for example, using "long longs")
+while your memory may still be limited to 2 gigabytes (because your
+pointers could still be 32-bit). Note that the name C<64bitint> does
+not imply that your C compiler will be using 64-bit C<int>s (it might,
+but it doesn't have to): the C<use64bitint> means that you will be
+able to have 64 bits wide scalar values.
+
+The C<use64bitall> goes all the way by attempting to switch also
+integers (if it can), longs (and pointers) to being 64-bit. This may
+create an even more binary incompatible Perl than -Duse64bitint: the
+resulting executable may not run at all in a 32-bit box, or you may
+have to reboot/reconfigure/rebuild your operating system to be 64-bit
+aware.
+
+Natively 64-bit systems like Alpha and Cray need neither -Duse64bitint
+nor -Duse64bitall.
+
+ NOTE: 64-bit support is still experimental on most platforms.
+ Existing support only covers the LP64 data model. In particular, the
+ LLP64 data model is not yet supported. 64-bit libraries and system
+ APIs on many platforms have not stabilized--your mileage may vary.
+
+=head2 Long doubles
+
+In some systems you may be able to use long doubles to enhance the
+range and precision of your double precision floating point numbers
+(that is, Perl's numbers). Use Configure -Duselongdouble to enable
+this support (if it is available).
+
+=head2 "more bits"
+
+You can "Configure -Dusemorebits" to turn on both the 64-bit support
+and the long double support.
+
=head2 Selecting File IO mechanisms
Previous versions of perl used the standard IO mechanisms as defined in
configuration exists to allow these issues to be worked on.
This option requires the 'sfio' package to have been built and installed.
-A (fairly old) version of sfio is in CPAN, and work is in progress to make
-it more easily buildable by adding Configure support.
+The latest sfio is available from http://www.research.att.com/sw/tools/sfio/
You select this option by
that you have sfio, then sfio will be the default suggested by
Configure.
-Note: On some systems, sfio's iffe configuration script fails
-to detect that you have an atexit function (or equivalent).
-Apparently, this is a problem at least for some versions of Linux
-and SunOS 4.
-
-You can test if you have this problem by trying the following shell
-script. (You may have to add some extra cflags and libraries. A
-portable version of this may eventually make its way into Configure.)
-
- #!/bin/sh
- cat > try.c <<'EOCP'
- #include <stdio.h>
- main() { printf("42\n"); }
- EOCP
- cc -o try try.c -lsfio
- val=`./try`
- if test X$val = X42; then
- echo "Your sfio looks ok"
- else
- echo "Your sfio has the exit problem."
- fi
-
-If you have this problem, the fix is to go back to your sfio sources
-and correct iffe's guess about atexit (or whatever is appropriate for
-your platform.)
-
-There also might be a more recent release of Sfio that fixes your
-problem.
+Note: On some systems, sfio's iffe configuration script fails to
+detect that you have an atexit function (or equivalent). Apparently,
+this is a problem at least for some versions of Linux and SunOS 4.
+Configure should detect this problem and warn you about problems with
+_exit vs. exit. If you have this problem, the fix is to go back to
+your sfio sources and correct iffe's guess about atexit.
=item 2.
=back
+=head2 SOCKS
+
+Perl can be configured to be 'socksified', that is, to use the SOCKS
+TCP/IP proxy protocol library. SOCKS is used to give applications
+access to transport layer network proxies. Perl supports only SOCKS
+Version 5. You can find more about SOCKS from http://www.socks.nec.com/
+
+=head2 Dynamic Loading
+
+By default, Configure will compile perl to use dynamic loading if
+your system supports it. If you want to force perl to be compiled
+statically, you can either choose this when Configure prompts you or
+you can use the Configure command line option -Uusedl.
+
=head2 Building a shared libperl.so Perl library
Currently, for most systems, the main perl executable is built by
sh Configure -Duseshrplib
-To actually build perl, you must add the current working directory to your
-LD_LIBRARY_PATH environment variable before running make. You can do
-this with
+To build a shared libperl, the environment variable controlling shared
+library search (LD_LIBRARY_PATH in most systems, DYLD_LIBRARY_PATH for
+NeXTSTEP/OPENSTEP/Darwin, LIBRARY_PATH for BeOS, LD_LIBRARY_PATH/SHLIB_PATH
+for HP-UX, LIBPATH for AIX, PATH for Cygwin) must be set up to include
+the Perl build directory because that's where the shared libperl will
+be created. Configure arranges makefile to have the correct shared
+library search settings.
+
+However, there are some special cases where manually setting the
+shared library path might be required. For example, if you want to run
+something like the following with the newly-built but not-yet-installed
+./perl:
+
+ cd t; ./perl misc/failing_test.t
+or
+ ./perl -Ilib ~/my_mission_critical_test
+
+then you need to set up the shared library path explicitly.
+You can do this with
LD_LIBRARY_PATH=`pwd`:$LD_LIBRARY_PATH; export LD_LIBRARY_PATH
setenv LD_LIBRARY_PATH `pwd`
-for Csh-style shells. You *MUST* do this before running make.
-Folks running NeXT OPENSTEP must substitute DYLD_LIBRARY_PATH for
-LD_LIBRARY_PATH above.
+for Csh-style shells. (This procedure may also be needed if for some
+unexpected reason Configure fails to set up makefile correctly.)
+
+You can often recognize failures to build/use a shared libperl from error
+messages complaining about a missing libperl.so (or libperl.sl in HP-UX),
+for example:
+18126:./miniperl: /sbin/loader: Fatal Error: cannot map libperl.so
There is also an potential problem with the shared perl library if you
want to have more than one "flavor" of the same version of perl (e.g.
The only reliable answer is that you should specify a different
directory for the architecture-dependent library for your -DDEBUGGING
version of perl. You can do this by changing all the *archlib*
-variables in config.sh, namely archlib, archlib_exp, and
-installarchlib, to point to your new architecture-dependent library.
+variables in config.sh to point to your new architecture-dependent library.
=head2 Malloc Issues
-Perl relies heavily on malloc(3) to grow data structures as needed, so
-perl's performance can be noticeably affected by the performance of
-the malloc function on your system.
+Perl relies heavily on malloc(3) to grow data structures as needed,
+so perl's performance can be noticeably affected by the performance of
+the malloc function on your system. The perl source is shipped with a
+version of malloc that has been optimized for the typical requests from
+perl, so there's a chance that it may be both faster and use less memory
+than your system malloc.
+
+However, if your system already has an excellent malloc, or if you are
+experiencing difficulties with extensions that use third-party libraries
+that call malloc, then you should probably use your system's malloc.
+(Or, you might wish to explore the malloc flags discussed below.)
-The perl source is shipped with a version of malloc that is very fast
-but somewhat wasteful of space. On the other hand, your system's
-malloc() function may be a bit slower but also a bit more frugal.
+=over 4
-For many uses, speed is probably the most important consideration, so
-the default behavior (for most systems) is to use the malloc supplied
-with perl. However, if you will be running very large applications
-(e.g. Tk or PDL) or if your system already has an excellent malloc, or
-if you are experiencing difficulties with extensions that use
-third-party libraries that call malloc, then you might wish to use
-your system's malloc. (Or, you might wish to explore the experimental
-malloc flags discussed below.)
+=item Using the system malloc
To build without perl's malloc, you can use the Configure command
or you can answer 'n' at the appropriate interactive Configure prompt.
-=head2 Malloc Performance Flags
-
-If you are using Perl's malloc, you may add one or
-more of the following items to your cflags config.sh variable
-to change its behavior in potentially useful ways. You can find out
-more about these flags by reading the malloc.c source.
-In a future version of perl, these might be enabled by default.
-
-=over 4
+=item -DPERL_POLLUTE_MALLOC
-=item -DPERL_EMERGENCY_SBRK
+NOTE: This flag is enabled automatically on some platforms if you
+asked for binary compatibility with version 5.005, or if you just
+run Configure to accept all the defaults on those platforms. You
+can refuse the automatic binary compatibility flags wholesale by
+running:
-If PERL_EMERGENCY_SBRK is defined, running out of memory need not be a
-fatal error: a memory pool can allocated by assigning to the special
-variable $^M. See perlvar(1) for more details.
+ sh Configure -Ubincompat5005
-=item -DPACK_MALLOC
+or by answering 'n' at the appropriate prompt.
-If PACK_MALLOC is defined, malloc.c uses a slightly different
-algorithm for small allocations (up to 64 bytes long). Such small
-allocations are quite common in typical Perl scripts.
+Perl's malloc family of functions are called Perl_malloc(),
+Perl_realloc(), Perl_calloc() and Perl_mfree(). When this flag is
+not enabled, the names do not clash with the system versions of
+these functions.
-The expected memory savings (with 8-byte alignment in $alignbytes) is
-about 20% for typical Perl usage. The expected slowdown due to the
-additional malloc overhead is in fractions of a percent. (It is hard
-to measure because of the effect of the saved memory on speed).
+If enabled, Perl's malloc family of functions will have the same
+names as the system versions. This may be sometimes required when you
+have libraries that like to free() data that may have been allocated
+by Perl_malloc() and vice versa.
-=item -DTWO_POT_OPTIMIZE
-
-If TWO_POT_OPTIMIZE is defined, malloc.c uses a slightly different
-algorithm for large allocations that are close to a power of two
-(starting with 16K). Such allocations are typical for big hashes and
-special-purpose scripts, especially image processing. If you will be
-manipulating very large blocks with sizes close to powers of two, it
-might be wise to define this macro.
-
-The expected saving of memory is 0-100% (100% in applications which
-require most memory in such 2**n chunks). The expected slowdown is
-negligible.
+Note that enabling this option may sometimes lead to duplicate symbols
+from the linker for malloc et al. In such cases, the system probably
+does not allow its malloc functions to be fully replaced with custom
+versions.
=back
This will do two independent things: First, it will force compilation
to use cc -g so that you can use your system's debugger on the
executable. (Note: Your system may actually require something like
-cc -g2. Check your man pages for cc(1) and also any hint file for your
-system.) Second, it will add -DDEBUGGING to your ccflags variable in
-config.sh so that you can use B<perl -D> to access perl's internal
-state. (Note: Configure will only add -DDEBUGGING by
-default if you are not reusing your old config.sh. If you want to
-reuse your old config.sh, then you can just edit it and change the
-optimize and ccflags variables by hand and then propagate your changes
-as shown in L<"Propagating your changes to config.sh"> below.)
+cc -g2. Check your man pages for cc(1) and also any hint file for
+your system.) Second, it will add -DDEBUGGING to your ccflags
+variable in config.sh so that you can use B<perl -D> to access perl's
+internal state. (Note: Configure will only add -DDEBUGGING by default
+if you are not reusing your old config.sh. If you want to reuse your
+old config.sh, then you can just edit it and change the optimize and
+ccflags variables by hand and then propagate your changes as shown in
+L<"Propagating your changes to config.sh"> below.)
You can actually specify -g and -DDEBUGGING independently, but usually
it's convenient to have both.
If you are using a shared libperl, see the warnings about multiple
versions of perl under L<Building a shared libperl.so Perl library>.
-=head2 Other Compiler Flags
+=head2 Extensions
-For most users, all of the Configure defaults are fine. However,
-you can change a number of factors in the way perl is built
-by adding appropriate -D directives to your ccflags variable in
-config.sh.
+Perl ships with a number of standard extensions. These are contained
+in the ext/ subdirectory.
+
+By default, Configure will offer to build every extension which appears
+to be supported. For example, Configure will offer to build GDBM_File
+only if it is able to find the gdbm library. (See examples below.)
+Configure does not contain code to test for POSIX compliance, so POSIX
+is always built by default as well. If you wish to skip POSIX, you can
+set the Configure variable useposix=false either in a hint file or from
+the Configure command line.
+
+If you unpack any additional extensions in the ext/ directory before
+running Configure, then Configure will offer to build those additional
+extensions as well. Most users probably shouldn't have to do this --
+it is usually easier to build additional extensions later after perl
+has been installed. However, if you wish to have those additional
+extensions statically linked into the perl binary, then this offers a
+convenient way to do that in one step. (It is not necessary, however;
+you can build and install extensions just fine even if you don't have
+dynamic loading. See lib/ExtUtils/MakeMaker.pm for more details.)
+
+You can learn more about each of the supplied extensions by consulting the
+documentation in the individual .pm modules, located under the
+ext/ subdirectory.
-For example, you can replace the rand() and srand() functions in the
-perl source by any other random number generator by a trick such as the
-following:
+Even if you do not have dynamic loading, you must still build the
+DynaLoader extension; you should just build the stub dl_none.xs
+version. (Configure will suggest this as the default.)
+
+In summary, here are the Configure command-line variables you can set
+to turn off various extensions. All others are included by default.
+
+ DB_File i_db
+ DynaLoader (Must always be included as a static extension)
+ GDBM_File i_gdbm
+ NDBM_File i_ndbm
+ ODBM_File i_dbm
+ POSIX useposix
+ Opcode useopcode
+ Socket d_socket
+ Threads use5005threads
+
+Thus to skip the NDBM_File extension, you can use
+
+ sh Configure -Ui_ndbm
+
+Again, this is taken care of automatically if you don't have the ndbm
+library.
+
+Of course, you may always run Configure interactively and select only
+the extensions you want.
+
+Note: The DB_File module will only work with version 1.x of Berkeley
+DB or newer releases of version 2. Configure will automatically detect
+this for you and refuse to try to build DB_File with earlier
+releases of version 2.
+
+If you re-use your old config.sh but change your system (e.g. by
+adding libgdbm) Configure will still offer your old choices of extensions
+for the default answer, but it will also point out the discrepancy to
+you.
+
+Finally, if you have dynamic loading (most modern systems do)
+remember that these extensions do not increase the size of your perl
+executable, nor do they impact start-up time, so you probably might as
+well build all the ones that will work on your system.
+
+=head2 Including locally-installed libraries
+
+Perl5 comes with interfaces to number of database extensions, including
+dbm, ndbm, gdbm, and Berkeley db. For each extension, if
+Configure can find the appropriate header files and libraries, it will
+automatically include that extension. The gdbm and db libraries
+are not included with perl. See the library documentation for
+how to obtain the libraries.
+
+If your database header (.h) files are not in a directory normally
+searched by your C compiler, then you will need to include the
+appropriate -I/your/directory option when prompted by Configure. If
+your database library (.a) files are not in a directory normally
+searched by your C compiler and linker, then you will need to include
+the appropriate -L/your/directory option when prompted by Configure.
+See the examples below.
+
+=head2 Examples
+
+=over 4
+
+=item gdbm in /usr/local
+
+Suppose you have gdbm and want Configure to find it and build the
+GDBM_File extension. This example assumes you have gdbm.h
+installed in /usr/local/include/gdbm.h and libgdbm.a installed in
+/usr/local/lib/libgdbm.a. Configure should figure all the
+necessary steps out automatically.
+
+Specifically, when Configure prompts you for flags for
+your C compiler, you should include -I/usr/local/include.
+
+When Configure prompts you for linker flags, you should include
+-L/usr/local/lib.
+
+If you are using dynamic loading, then when Configure prompts you for
+linker flags for dynamic loading, you should again include
+-L/usr/local/lib.
+
+Again, this should all happen automatically. This should also work if
+you have gdbm installed in any of (/usr/local, /opt/local, /usr/gnu,
+/opt/gnu, /usr/GNU, or /opt/GNU).
+
+=item gdbm in /usr/you
+
+Suppose you have gdbm installed in some place other than /usr/local/,
+but you still want Configure to find it. To be specific, assume you
+have /usr/you/include/gdbm.h and /usr/you/lib/libgdbm.a. You
+still have to add -I/usr/you/include to cc flags, but you have to take
+an extra step to help Configure find libgdbm.a. Specifically, when
+Configure prompts you for library directories, you have to add
+/usr/you/lib to the list.
+
+It is possible to specify this from the command line too (all on one
+line):
+
+ sh Configure -de \
+ -Dlocincpth="/usr/you/include" \
+ -Dloclibpth="/usr/you/lib"
+
+locincpth is a space-separated list of include directories to search.
+Configure will automatically add the appropriate -I directives.
+
+loclibpth is a space-separated list of library directories to search.
+Configure will automatically add the appropriate -L directives. If
+you have some libraries under /usr/local/ and others under
+/usr/you, then you have to include both, namely
+
+ sh Configure -de \
+ -Dlocincpth="/usr/you/include /usr/local/include" \
+ -Dloclibpth="/usr/you/lib /usr/local/lib"
+
+=back
- sh Configure -Dccflags='-Drand=random -Dsrand=srandom'
+=head2 Building DB, NDBM, and ODBM interfaces with Berkeley DB 3
-or by adding -Drand=random and -Dsrand=srandom to your ccflags
-at the appropriate Configure prompt. (Note: Although this worked for
-me, it might not work for you if your system's header files give
-different prototypes for rand() and random() or srand() and srandom().)
+Perl interface for DB3 is part of Berkeley DB, but if you want to
+compile standard Perl DB/ODBM/NDBM interfaces, you must follow
+following instructions.
-You should also run Configure interactively to verify that a hint file
-doesn't inadvertently override your ccflags setting. (Hints files
-shouldn't do that, but some might.)
+Berkeley DB3 from Sleepycat Software is by default installed without
+DB1 compatibility code (needed for DB_File interface) and without
+links to compatibility files. So if you want to use packages written
+for DB/ODBM/NDBM interfaces, you need to configure DB3 with
+--enable-compat185 (and optionally with --enable-dump185) and create
+additional references (suppose you are installing DB3 with
+--prefix=/usr):
+
+ ln -s libdb-3.so /usr/lib/libdbm.so
+ ln -s libdb-3.so /usr/lib/libndbm.so
+ echo '#define DB_DBM_HSEARCH 1' >dbm.h
+ echo '#include <db.h>' >>dbm.h
+ install -m 0644 dbm.h /usr/include/dbm.h
+ install -m 0644 dbm.h /usr/include/ndbm.h
+
+Optionally, if you have compiled with --enable-compat185 (not needed
+for ODBM/NDBM):
+
+ ln -s libdb-3.so /usr/lib/libdb1.so
+ ln -s libdb-3.so /usr/lib/libdb.so
+
+ODBM emulation seems not to be perfect, but is quite usable,
+using DB 3.1.17:
+
+ lib/odbm.............FAILED at test 9
+ Failed 1/64 tests, 98.44% okay
=head2 What if it doesn't work?
+If you run into problems, try some of the following ideas.
+If none of them help, then see L<"Reporting Problems"> below.
+
=over 4
=item Running Configure Interactively
will offer to use that hint file.
Several of the hint files contain additional important information.
-If you have any problems, it is a good idea to read the relevant hint
-file for further information. See hints/solaris_2.sh for an
-extensive example.
+If you have any problems, it is a good idea to read the relevant hint file
+for further information. See hints/solaris_2.sh for an extensive example.
+More information about writing good hints is in the hints/README.hints
+file.
=item *** WHOA THERE!!! ***
For example, suppose you have added libgdbm.a to your system
and you decide to reconfigure perl to use GDBM_File. When you run
Configure again, you will need to add -lgdbm to the list of libraries.
-Now, Configure will find your gdbm library and will issue a message:
+Now, Configure will find your gdbm include file and library and will
+issue a message:
*** WHOA THERE!!! ***
The previous value for $i_gdbm on this machine was "undef"!
make depend
make
-=item config.over
+=item config.over and config.arch
-You can also supply a shell script config.over to over-ride Configure's
-guesses. It will get loaded up at the very end, just before config.sh
-is created. You have to be careful with this, however, as Configure
-does no checking that your changes make sense. See the section on
-L<"Changing the installation directory"> for an example.
+You can also supply a shell script config.over to over-ride
+Configure's guesses. It will get loaded up at the very end, just
+before config.sh is created. You have to be careful with this,
+however, as Configure does no checking that your changes make sense.
+This file is usually good for site-specific customizations.
+
+There is also another file that, if it exists, is loaded before the
+config.over, called config.arch. This file is intended to be per
+architecture, not per site, and usually it's the architecture-specific
+hints file that creates the config.arch.
=item config.h
can also edit cflags directly, but beware that your changes will be
lost the next time you run Configure.
-To change the C flags for all the files, edit config.sh
-and change either $ccflags or $optimize,
-and then re-run
+To explore various ways of changing ccflags from within a hint file,
+see the file hints/README.hints.
+
+To change the C flags for all the files, edit config.sh and change either
+$ccflags or $optimize, and then re-run
sh Configure -S
make depend
=item No sh
-If you don't have sh, you'll have to copy the sample file Porting/config_H
-to config.h and edit the config.h to reflect your system's peculiarities.
+If you don't have sh, you'll have to copy the sample file
+Porting/config.sh to config.sh and edit your config.sh to reflect your
+system's peculiarities. See Porting/pumpkin.pod for more information.
You'll probably also have to extensively modify the extension building
mechanism.
+=item Environment variable clashes
+
+Configure uses a CONFIG variable that is reported to cause trouble on
+ReliantUnix 5.44. If your system sets this variable, you can try
+unsetting it before you run Configure. Configure should eventually
+be fixed to avoid polluting the namespace of the environment.
+
+=item Digital UNIX/Tru64 UNIX and BIN_SH
+
+In Digital UNIX/Tru64 UNIX, Configure might abort with
+
+Build a threading Perl? [n]
+Configure[2437]: Syntax error at line 1 : `config.sh' is not expected.
+
+This indicates that Configure is being run with a broken Korn shell
+(even though you think you are using a Bourne shell by using
+"sh Configure" or "./Configure"). The Korn shell bug has been reported
+to Compaq as of February 1999 but in the meanwhile, the reason ksh is
+being used is that you have the environment variable BIN_SH set to
+'xpg4'. This causes /bin/sh to delegate its duties to /bin/posix/sh
+(a ksh). Unset the environment variable and rerun Configure.
+
+=item HP-UX 11, pthreads, and libgdbm
+
+If you are running Configure with -Dusethreads in HP-UX 11, be warned
+that POSIX threads and libgdbm (the GNU dbm library) compiled before
+HP-UX 11 do not mix. This will cause a basic test run by Configure to
+fail
+
+Pthread internal error: message: __libc_reinit() failed, file: ../pthreads/pthread.c, line: 1096
+Return Pointer is 0xc082bf33
+sh: 5345 Quit(coredump)
+
+and Configure will give up. The cure is to recompile and install
+libgdbm under HP-UX 11.
+
=item Porting information
Specific information for the OS/2, Plan9, VMS and Win32 ports is in the
corresponding README files and subdirectories. Additional information,
including a glossary of all those config.sh variables, is in the Porting
-subdirectory.
+subdirectory. Especially Porting/Glossary should come in handy.
Ports for other systems may also be available. You should check out
-http://www.perl.com/CPAN/ports for current information on ports to
+http://www.cpan.org/ports for current information on ports to
various other operating systems.
+If you plan to port Perl to a new architecture study carefully the
+section titled "Philosophical Issues in Patching and Porting Perl"
+in the file Porting/pumpkin.pod and the file Porting/patching.pod.
+Study also how other non-UNIX ports have solved problems.
+
=back
+=head1 Adding extra modules to the build
+
+You can specify extra modules or module bundles to be fetched from the
+CPAN and installed as part of the Perl build. Either use the -Dextras=...
+command line parameter to Configure, for example like this:
+
+ Configure -Dextras="Compress::Zlib Bundle::LWP DBI"
+
+or answer first 'y' to the question 'Install any extra modules?' and
+then answer "Compress::Zlib Bundle::LWP DBI" to the 'Extras?' question.
+The module or the bundle names are as for the CPAN module 'install' command.
+
+Notice that because the CPAN module will be used to fetch the extra
+modules, you will need access to the CPAN, either via the Internet,
+or via a local copy such as a CD-ROM or a local CPAN mirror. If you
+do not, using the extra modules option will die horribly.
+
+Also notice that you yourself are responsible for satisfying any extra
+dependencies such as external headers or libraries BEFORE trying the build.
+For example: you will need to have the zlib.h header and the libz
+library installed for the Compress::Zlib, or the Foo database specific
+headers and libraries installed for the DBD::Foo module. The Configure
+process or the Perl build process will not help you with these.
+
+=head1 suidperl
+
+suidperl is an optional component, which is built or installed by default.
+From perlfaq1:
+
+ On some systems, setuid and setgid scripts (scripts written
+ in the C shell, Bourne shell, or Perl, for example, with the
+ set user or group ID permissions enabled) are insecure due to
+ a race condition in the kernel. For those systems, Perl versions
+ 5 and 4 attempt to work around this vulnerability with an optional
+ component, a special program named suidperl, also known as sperl.
+ This program attempts to emulate the set-user-ID and set-group-ID
+ features of the kernel.
+
+Because of the buggy history of suidperl, and the difficulty
+of properly security auditing as large and complex piece of
+software as Perl, we cannot recommend using suidperl and the feature
+should be considered deprecated.
+Instead use for example 'sudo': http://www.courtesan.com/sudo/
+
=head1 make depend
-This will look for all the includes.
-The output is stored in makefile. The only difference between
-Makefile and makefile is the dependencies at the bottom of
-makefile. If you have to make any changes, you should edit
-makefile, not Makefile since the Unix make command reads
-makefile first. (On non-Unix systems, the output may be stored in
-a different file. Check the value of $firstmakefile in your config.sh
-if in doubt.)
+This will look for all the includes. The output is stored in makefile.
+The only difference between Makefile and makefile is the dependencies at
+the bottom of makefile. If you have to make any changes, you should edit
+makefile, not Makefile since the Unix make command reads makefile first.
+(On non-Unix systems, the output may be stored in a different file.
+Check the value of $firstmakefile in your config.sh if in doubt.)
Configure will offer to do this step for you, so it isn't listed
explicitly above.
This will attempt to make perl in the current directory.
+=head2 What if it doesn't work?
+
If you can't compile successfully, try some of the following ideas.
If none of them help, and careful reading of the error message and
-the relevant manual pages on your system doesn't help, you can
-send a message to either the comp.lang.perl.misc newsgroup or to
-perlbug@perl.com with an accurate description of your problem.
-See L<"Reporting Problems"> below.
+the relevant manual pages on your system doesn't help,
+then see L<"Reporting Problems"> below.
=over 4
If you can successfully build miniperl, but the process crashes
during the building of extensions, you should run
- make minitest
+ make minitest
to test your version of miniperl.
=item locale
-If you have any locale-related environment variables set, try
-unsetting them. I have some reports that some versions of IRIX hang
-while running B<./miniperl configpm> with locales other than the C
-locale. See the discussion under L<"make test"> below about locales
-and the whole L<Locale problems> section in the file pod/perllocale.pod.
+If you have any locale-related environment variables set, try unsetting
+them. I have some reports that some versions of IRIX hang while
+running B<./miniperl configpm> with locales other than the C locale.
+See the discussion under L<"make test"> below about locales and the
+whole L<"Locale problems"> section in the file pod/perllocale.pod.
The latter is especially useful if you see something like this
perl: warning: Setting locale failed.
at Perl startup.
-=item malloc duplicates
-
-If you get duplicates upon linking for malloc et al, add -DEMBEDMYMALLOC
-to your ccflags variable in config.sh.
-
=item varargs
If you get varargs problems with gcc, be sure that gcc is installed
-correctly. When using gcc, you should probably have i_stdarg='define'
-and i_varargs='undef' in config.sh. The problem is usually solved by
-running fixincludes correctly. If you do change config.sh, don't
-forget to propagate your changes (see
-L<"Propagating your changes to config.sh"> below).
+correctly and that you are not passing -I/usr/include to gcc. When using
+gcc, you should probably have i_stdarg='define' and i_varargs='undef'
+in config.sh. The problem is usually solved by running fixincludes
+correctly. If you do change config.sh, don't forget to propagate
+your changes (see L<"Propagating your changes to config.sh"> below).
See also the L<"vsprintf"> item below.
-=item croak
+=item util.c
If you get error messages such as the following (the exact line
-numbers will vary in different versions of perl):
+numbers and function name may vary in different versions of perl):
- util.c: In function `Perl_croak':
- util.c:962: number of arguments doesn't match prototype
- proto.h:45: prototype declaration
+ util.c: In function `Perl_form':
+ util.c:1107: number of arguments doesn't match prototype
+ proto.h:125: prototype declaration
it might well be a symptom of the gcc "varargs problem". See the
previous L<"varargs"> item.
-=item Solaris and SunOS dynamic loading
-
-If you have problems with dynamic loading using gcc on SunOS or
-Solaris, and you are using GNU as and GNU ld, you may need to add
--B/bin/ (for SunOS) or -B/usr/ccs/bin/ (for Solaris) to your
-$ccflags, $ldflags, and $lddlflags so that the system's versions of as
-and ld are used. Note that the trailing '/' is required.
-Alternatively, you can use the GCC_EXEC_PREFIX
-environment variable to ensure that Sun's as and ld are used. Consult
-your gcc documentation for further information on the -B option and
-the GCC_EXEC_PREFIX variable.
-
-One convenient way to ensure you are not using GNU as and ld is to
-invoke Configure with
-
- sh Configure -Dcc='gcc -B/usr/ccs/bin/'
-
-for Solaris systems. For a SunOS system, you must use -B/bin/
-instead.
-
-Alternatively, recent versions of GNU ld reportedly work if you
-include C<-Wl,-export-dynamic> in the ccdlflags variable in
-config.sh.
-
-=item ld.so.1: ./perl: fatal: relocation error:
-
-If you get this message on SunOS or Solaris, and you're using gcc,
-it's probably the GNU as or GNU ld problem in the previous item
-L<"Solaris and SunOS dynamic loading">.
-
=item LD_LIBRARY_PATH
If you run into dynamic loading problems, check your setting of
fine with LD_LIBRARY_PATH unset, though that may depend on details
of your local set-up.
-=item dlopen: stub interception failed
-
-The primary cause of the 'dlopen: stub interception failed' message is
-that the LD_LIBRARY_PATH environment variable includes a directory
-which is a symlink to /usr/lib (such as /lib).
-
-The reason this causes a problem is quite subtle. The file libdl.so.1.0
-actually *only* contains functions which generate 'stub interception
-failed' errors! The runtime linker intercepts links to
-"/usr/lib/libdl.so.1.0" and links in internal implementation of those
-functions instead. [Thanks to Tim Bunce for this explanation.]
-
=item nm extraction
If Configure seems to be having trouble finding library functions,
If you have previously run Configure, you should not reuse your old
config.sh.
+=item umask not found
+
+If the build processes encounters errors relating to umask(), the problem
+is probably that Configure couldn't find your umask() system call.
+Check your config.sh. You should have d_umask='define'. If you don't,
+this is probably the L<"nm extraction"> problem discussed above. Also,
+try reading the hints file for your system for further information.
+
=item vsprintf
If you run into problems with vsprintf in compiling util.c, the
d_vprintf='define'
If Configure guessed wrong, it is likely that Configure guessed wrong
-on a number of other common functions too. You are probably better off
-re-running Configure without using nm extraction (see previous item).
+on a number of other common functions too. This is probably
+the L<"nm extraction"> problem discussed above.
=item do_aspawn
If you run into problems relating to do_aspawn or do_spawn, the
problem is probably that Configure failed to detect your system's
-fork() function. Follow the procedure in the previous items
-on L<"vsprintf"> and L<"nm extraction">.
+fork() function. Follow the procedure in the previous item
+on L<"nm extraction">.
=item __inet_* errors
/usr/local/bin/arpa/inet.h during the Perl build and test process to
avoid the problem.
+=item #error "No DATAMODEL_NATIVE specified"
+
+This is a common error when trying to build perl on Solaris 2.6 with a
+gcc installation from Solaris 2.5 or 2.5.1. The Solaris header files
+changed, so you need to update your gcc installation. You can either
+rerun the fixincludes script from gcc or take the opportunity to
+update your gcc installation.
+
=item Optimizer
If you can't compile successfully, try turning off your compiler's
optimize='-O'
-to something like
+to
optimize=' '
=item CRIPPLED_CC
-If you still can't compile successfully, try adding a -DCRIPPLED_CC
-flag. (Just because you get no errors doesn't mean it compiled right!)
-This simplifies some complicated expressions for compilers that get
-indigestion easily.
+If you still can't compile successfully, try:
+
+ sh Configure -Accflags=-DCRIPPLED_CC
+
+This flag simplifies some complicated expressions for compilers that get
+indigestion easily. (Just because you get no errors doesn't mean it
+compiled right!)
=item Missing functions
If you have missing routines, you probably need to add some library or
other, or you need to undefine some feature that Configure thought was
there but is defective or incomplete. Look through config.h for
-likely suspects.
+likely suspects. If Configure guessed wrong on a number of functions,
+you might have the L<"nm extraction"> problem discussed above.
=item toke.c
with FreeBSD 2.1) had broken handling of recno databases with modified
bval settings. Upgrade your DB library or OS.
+=item Bad arg length for semctl, is XX, should be ZZZ
+
+If you get this error message from the lib/ipc_sysv test, your System
+V IPC may be broken. The XX typically is 20, and that is what ZZZ
+also should be. Consider upgrading your OS, or reconfiguring your OS
+to include the System V semaphores.
+
+=item lib/ipc_sysv........semget: No space left on device
+
+Either your account or the whole system has run out of semaphores. Or
+both. Either list the semaphores with "ipcs" and remove the unneeded
+ones (which ones these are depends on your system and applications)
+with "ipcrm -s SEMAPHORE_ID_HERE" or configure more semaphores to your
+system.
+
+=item GNU binutils
+
+If you mix GNU binutils (nm, ld, ar) with equivalent vendor-supplied
+tools you may be in for some trouble. For example creating archives
+with an old GNU 'ar' and then using a new current vendor-supplied 'ld'
+may lead into linking problems. Either recompile your GNU binutils
+under your current operating system release, or modify your PATH not
+to include the GNU utils before running Configure, or specify the
+vendor-supplied utilities explicitly to Configure, for example by
+Configure -Dar=/bin/ar.
+
+=item THIS PACKAGE SEEMS TO BE INCOMPLETE
+
+The F<Configure> program has not been able to find all the files which
+make up the complete Perl distribution. You may have a damaged source
+archive file (in which case you may also have seen messages such as
+C<gzip: stdin: unexpected end of file> and C<tar: Unexpected EOF on
+archive file>), or you may have obtained a structurally-sound but
+incomplete archive. In either case, try downloading again from the
+official site named at the start of this document. If you do find
+that any site is carrying a corrupted or incomplete source code
+archive, please report it to the site's maintainer.
+
+=item invalid token: ##
+
+You are using a non-ANSI-compliant C compiler. See L<WARNING: This
+version requires a compiler that supports ANSI C>.
+
=item Miscellaneous
Some additional things that have been reported for either perl4 or perl5:
UTS may need one or more of -DCRIPPLED_CC, -K or -g, and undef LSTAT.
+FreeBSD can fail the lib/ipc_sysv.t test if SysV IPC has not been
+configured to the kernel. Perl tries to detect this, though, and
+you will get a message telling what to do.
+
If you get syntax errors on '(', try -DCRIPPLED_CC.
Machines with half-implemented dbm routines will need to #undef I_ODBM
+HP-UX 11 Y2K patch "Y2K-1100 B.11.00.B0125 HP-UX Core OS Year 2000
+Patch Bundle" has been reported to break the io/fs test #18 which
+tests whether utime() can change timestamps. The Y2K patch seems to
+break utime() so that over NFS the timestamps do not get changed
+(on local filesystems utime() still works).
+
=back
+=head2 Cross-compilation
+
+Starting from Perl 5.8 Perl has the beginnings of cross-compilation
+support. What is known to work is running Configure in a
+cross-compilation environment and building the miniperl executable.
+What is known not to work is building the perl executable because
+that would require building extensions: Dynaloader statically and
+File::Glob dynamically, for extensions one needs MakeMaker and
+MakeMaker is not yet cross-compilation aware, and neither is
+the main Makefile.
+
+Since the functionality is so lacking, it must be considered
+highly experimental. It is so experimental that it is not even
+mentioned during an interactive Configure session, a direct command
+line invocation (detailed shortly) is required to access the
+functionality.
+
+ NOTE: Perl is routinely built using cross-compilation
+ in the EPOC environment but the solutions from there
+ can't directly be used elsewhere.
+
+The one environment where cross-compilation has successfully been used
+as of this writing is the Compaq iPAQ running ARM Linux. The build
+host was Intel Linux, the networking setup was PPP + SSH. The exact
+setup details are beyond the scope of this document, see
+http://www.handhelds.org/ for more information.
+
+To run Configure in cross-compilation mode the basic switch is
+C<-Dusecrosscompile>.
+
+ sh ./Configure -des -Dusecrosscompile -D...
+
+This will make the cpp symbol USE_CROSS_COMPILE and the %Config
+symbol C<usecrosscompile> available.
+
+During the Configure and build, certain helper scripts will be created
+into the Cross/ subdirectory. The scripts are used to execute a
+cross-compiled executable, and to transfer files to and from the
+target host. The execution scripts are named F<run-*> and the
+transfer scripts F<to-*> and F<from-*>. The part after the dash is
+the method to use for remote execution and transfer: by default the
+methods are B<ssh> and B<scp>, thus making the scripts F<run-ssh>,
+F<to-scp>, and F<from-scp>.
+
+To configure the scripts for a target host and a directory (in which
+the execution will happen and which is to and from where the transfer
+happens), supply Configure with
+
+ -Dtargethost=so.me.ho.st -Dtargetdir=/tar/get/dir
+
+The targethost is what e.g. ssh will use as the hostname, the targetdir
+must exist (the scripts won't create it), the targetdir defaults to /tmp.
+You can also specify a username to use for ssh/rsh logins
+
+ -Dtargetuser=luser
+
+but in case you don't, "root" will be used.
+
+Because this is a cross-compilation effort, you will also need to specify
+which target environment and which compilation environment to use.
+This includes the compiler, the header files, and the libraries.
+In the below we use the usual settings for the iPAQ cross-compilation
+environment:
+
+ -Dtargetarch=arm-linux
+ -Dcc=arm-linux-gcc
+ -Dusrinc=/skiff/local/arm-linux/include
+ -Dincpth=/skiff/local/arm-linux/include
+ -Dlibpth=/skiff/local/arm-linux/lib
+
+If the name of the C<cc> has the usual GNU C semantics for cross
+compilers, that is, CPU-OS-gcc, the names of the C<ar>, C<nm>, and
+C<ranlib> will also be automatically chosen to be CPU-OS-ar and so on.
+(The C<ld> requires more thought and will be chosen later by Configure
+as appropriate.) Also, in this case the incpth, libpth, and usrinc
+will be guessed by Configure (unless explicitly set to something else,
+in which case Configure's guesses with be appended).
+
+In addition to the default execution/transfer methods you can also
+choose B<rsh> for execution, and B<rcp> or B<cp> for transfer,
+for example:
+
+ -Dtargetrun=rsh -Dtargetto=rcp -Dtargetfrom=cp
+
+Putting it all together:
+
+ sh ./Configure -des -Dusecrosscompile \
+ -Dtargethost=so.me.ho.st \
+ -Dtargetdir=/tar/get/dir \
+ -Dtargetuser=root \
+ -Dtargetarch=arm-linux \
+ -Dcc=arm-linux-gcc \
+ -Dusrinc=/skiff/local/arm-linux/include \
+ -Dincpth=/skiff/local/arm-linux/include \
+ -Dlibpth=/skiff/local/arm-linux/lib \
+ -D...
+
+or if you are happy with the defaults
+
+ sh ./Configure -des -Dusecrosscompile \
+ -Dtargethost=so.me.ho.st \
+ -Dcc=arm-linux-gcc \
+ -D...
+
=head1 make test
-This will run the regression tests on the perl you just made (you
-should run plain 'make' before 'make test' otherwise you won't have a
-complete build). If 'make test' doesn't say "All tests successful"
-then something went wrong. See the file t/README in the t subdirectory.
+This will run the regression tests on the perl you just made. If
+'make test' doesn't say "All tests successful" then something went
+wrong. See the file t/README in the t subdirectory.
Note that you can't run the tests in background if this disables
opening of /dev/tty. You can use 'make test-notty' in that case but
a few tty tests will be skipped.
+=head2 What if make test doesn't work?
+
If make test bombs out, just cd to the t directory and run ./TEST
by hand to see if it makes any difference. If individual tests
bomb, you can run them by hand, e.g.,
You should also read the individual tests to see if there are any helpful
comments that apply to your system.
+=over 4
+
+=item locale
+
Note: One possible reason for errors is that some external programs
may be broken due to the combination of your environment and the way
B<make test> exercises them. For example, this may happen if you have
open("...|"). All these mean that Perl is trying to run some
external program.
+=item Timing problems
+
+Several tests in the test suite check timing functions, such as sleep(),
+and see if they return in a reasonable amount of time. If your system is
+quite busy and doesn't return quickly enough, these tests might fail.
+If possible, try running the tests again with the system under a
+lighter load.
+
+=item Out of memory
+
+On some systems, particularly those with smaller amounts of RAM, some
+of the tests in t/op/pat.t may fail with an "Out of memory" message.
+For example, on my SparcStation IPC with 12 MB of RAM, in perl5.5.670,
+test 85 will fail if run under either t/TEST or t/harness.
+
+Try stopping other jobs on the system and then running the test by itself:
+
+ cd t; ./perl op/pat.t
+
+to see if you have any better luck. If your perl still fails this
+test, it does not necessarily mean you have a broken perl. This test
+tries to exercise the regular expression subsystem quite thoroughly,
+and may well be far more demanding than your normal usage.
+
+=item Test failures from lib/ftmp-security saying "system possibly insecure"
+
+Firstly, test failures from the ftmp-security are not necessarily
+serious or indicative of a real security threat. That being said,
+they bear investigating.
+
+The tests may fail for the following reasons. Note that each of the
+tests is run both in the building directory and the temporary
+directory, as returned by File::Spec->tmpdir().
+
+(1) If the directory the tests are being run is owned by somebody else
+than the user running the tests, or root (uid 0). This failure can
+happen if the Perl source code distribution is unpacked in a way that
+the user ids in the distribution package are used as-is. Some tar
+programs do this.
+
+(2) If the directory the test are being run in is writable by group
+or by other (remember: with UNIX/POSIX semantics, write access to
+a directory means the right to add/remove files in that directory),
+and there is no sticky bit set in the directory. 'Sticky bit' is
+a feature used in some UNIXes to give extra protection to files: if
+the bit is on a directory, no one but the owner (or the root) can remove
+that file even if the permissions of the directory would allow file
+removal by others. This failure can happen if the permissions in the
+directory simply are a bit too liberal for the tests' liking. This
+may or may not be a real problem: it depends on the permissions policy
+used on this particular directory/project/system/site. This failure
+can also happen if the system either doesn't support the sticky bit
+(this is the case with many non-UNIX platforms: in principle the
+File::Temp should know about these platforms and skip the tests), or
+if the system supports the sticky bit but for some reason or reasons
+it is not being used. This is for example the case with HP-UX: as of
+HP-UX release 11.00, the sticky bit is very much supported, but HP-UX
+doesn't use it on its /tmp directory as shipped. Also as with the
+permissions, some local policy might dictate that the stickiness is
+not used.
+
+(3) If the system supports the POSIX 'chown giveaway' feature and if
+any of the parent directories of the temporary file back to the root
+directory are 'unsafe', using the definitions given above in (1) and
+(2).
+
+See the documentation for the File::Temp module for more information
+about the various security aspects.
+
+=back
+
=head1 make install
This will put perl into the public directory you specified to
are not root, you must own the directories in question and you should
ignore any messages about chown not working.
+=head2 Installing perl under different names
+
+If you want to install perl under a name other than "perl" (for example,
+when installing perl with special features enabled, such as debugging),
+indicate the alternate name on the "make install" line, such as:
+
+ make install PERLNAME=myperl
+
+You can separately change the base used for versioned names (like
+"perl5.005") by setting PERLNAME_VERBASE, like
+
+ make install PERLNAME=perl5 PERLNAME_VERBASE=perl
+
+This can be useful if you have to install perl as "perl5" (due to an
+ancient version in /usr/bin supplied by your vendor, eg). Without this
+the versioned binary would be called "perl55.005".
+
+=head2 Installed files
+
If you want to see exactly what will happen without installing
anything, you can run
make install will install the following:
+ binaries
+
perl,
perl5.nnn where nnn is the current release number. This
will be a link to perl.
suidperl,
sperl5.nnn If you requested setuid emulation.
a2p awk-to-perl translator
+
+ scripts
+
cppstdin This is used by perl -P, if your cc -E can't
read from stdin.
c2ph, pstruct Scripts for handling C structures in header files.
pl2pm Convert Perl 4 .pl files to Perl 5 .pm modules
pod2html, Converters from perl's pod documentation format
pod2latex, to other useful formats.
- pod2man, and
- pod2text
+ pod2man,
+ pod2text,
+ pod2checker,
+ pod2select,
+ pod2usage
splain Describe Perl warnings and errors
+ dprofpp Perl code profile post-processor
+
+ library files
- library files in $privlib and $archlib specified to
+ in $privlib and $archlib specified to
Configure, usually under /usr/local/lib/perl5/.
- man pages in the location specified to Configure, usually
- something like /usr/local/man/man1.
- module in the location specified to Configure, usually
- man pages under /usr/local/lib/perl5/man/man3.
+
+ documentation
+
+ man pages in $man1dir, usually /usr/local/man/man1.
+ module man
+ pages in $man3dir, usually /usr/local/man/man3.
pod/*.pod in $privlib/pod/.
-Installperl will also create the library directories $siteperl and
-$sitearch listed in config.sh. Usually, these are something like
- /usr/local/lib/perl5/site_perl/
- /usr/local/lib/perl5/site_perl/$archname
-where $archname is something like sun4-sunos. These directories
-will be used for installing extensions.
+Installperl will also create the directories listed above
+in L<"Installation Directories">.
-Perl's *.h header files and the libperl.a library are also installed
-under $archlib so that any user may later build new extensions, run the
+Perl's *.h header files and the libperl library are also installed
+under $archlib so that any user may later build new modules, run the
optional Perl compiler, or embed the perl interpreter into another
program even if the Perl source is no longer available.
-=head1 Coexistence with earlier versions of perl5
+Sometimes you only want to install the version-specific parts of the perl
+installation. For example, you may wish to install a newer version of
+perl alongside an already installed production version of perl without
+disabling installation of new modules for the production version.
+To only install the version-specific parts of the perl installation, run
+
+ Configure -Dversiononly
+
+or answer 'y' to the appropriate Configure prompt. Alternatively,
+you can just manually run
+
+ ./perl installperl -v
-WARNING: The upgrade from 5.004_0x to 5.005 is going to be a bit
-tricky. See L<"Upgrading from 5.004 to 5.005"> below.
+and skip installman altogether.
+See also L<"Maintaining completely separate versions"> for another
+approach.
+
+=head1 Coexistence with earlier versions of perl5
In general, you can usually safely upgrade from one version of Perl (e.g.
5.004_04) to another similar version (e.g. 5.004_05) without re-compiling
top of the script with the particular version you want to run, e.g.
#!/usr/local/bin/perl5.00404.
-(If you are upgrading from 5.002 or earlier, beware that some of the
-standard library files have changed in incompatible ways, so you are
-probably better off starting with a fresh installation.)
-
-The standard library files in /usr/local/lib/perl5 should be usable by
-all versions of perl5 after 5.002. An exception is the diagnostics.pm
-module. Since that module uses the /usr/local/lib/perl5/pod/perldiag.pod
-documentation file, the C<use diagnostics;> pragma and the splain script
-will only identify and explain any warnings or errors that the most
-recently-installed version of perl can generate. Usually, this is not
-a problem.
-
Most extensions will probably not need to be recompiled to use
with a newer version of perl. Here is how it is supposed to work.
(These examples assume you accept all the Configure defaults.)
-The directories searched by version 5.004_05 will be
+Suppose you already have version 5.005_03 installed. The directories
+searched by 5.005_03 are
- /usr/local/lib/perl5/archname/5.00405
- /usr/local/lib/perl5/
- /usr/local/lib/perl5/site_perl/archname
- /usr/local/lib/perl5/site_perl
+ /usr/local/lib/perl5/5.00503/$archname
+ /usr/local/lib/perl5/5.00503
+ /usr/local/lib/perl5/site_perl/5.005/$archname
+ /usr/local/lib/perl5/site_perl/5.005
-while the directories searched by version 5.004_04 are
+Beginning with 5.6.0 the version number in the site libraries are
+fully versioned. Now, suppose you install version 5.6.0. The directories
+searched by version 5.6.0 will be
- /usr/local/lib/perl5/archname/5.00404
- /usr/local/lib/perl5/
- /usr/local/lib/perl5/site_perl/archname
- /usr/local/lib/perl5/site_perl
+ /usr/local/lib/perl5/5.6.0/$archname
+ /usr/local/lib/perl5/5.6.0
+ /usr/local/lib/perl5/site_perl/5.6.0/$archname
+ /usr/local/lib/perl5/site_perl/5.6.0
-When you install an add-on extension, it gets installed into
-/usr/local/lib/perl5/site_perl/archname (if it is architecture-specific.)
-This directory is deliberately NOT version-specific so that both 5.004_04
-and 5.004_05 can use the extension.
+ /usr/local/lib/perl5/site_perl/5.005/$archname
+ /usr/local/lib/perl5/site_perl/5.005
+ /usr/local/lib/perl5/site_perl/
-However, if you do run into problems, and you want to continue to
-use the old version of perl along with your extension, simply move
-those extension files to the appropriate version directory, such as
-/usr/local/lib/perl5/archname/5.00404. Then use your newer version of
-perl to rebuild and re-install the extension into site_perl. This way,
-Perl 5.004_04 will find your files in the 5.00404 directory, and
-newer versions of perl will find your newer extension in the site_perl
-directory.
+Notice the last three entries -- Perl understands the default structure
+of the $sitelib directories and will look back in older, compatible
+directories. This way, modules installed under 5.005_03 will continue
+to be usable by 5.005_03 but will also accessible to 5.6.0. Further,
+suppose that you upgrade a module to one which requires features
+present only in 5.6.0. That new module will get installed into
+/usr/local/lib/perl5/site_perl/5.6.0 and will be available to 5.6.0,
+but will not interfere with the 5.005_03 version.
+
+The last entry, /usr/local/lib/perl5/site_perl/, is there so that
+5.6.0 will look for 5.004-era pure perl modules.
+
+Lastly, suppose you now install version 5.6.1, which we'll assume is
+binary compatible with 5.6.0 and 5.005. The directories searched
+by 5.6.1 (if you don't change the Configure defaults) will be:
+
+ /usr/local/lib/perl5/5.6.1/$archname
+ /usr/local/lib/perl5/5.6.1
+ /usr/local/lib/perl5/site_perl/5.6.1/$archname
+ /usr/local/lib/perl5/site_perl/5.6.1
+
+ /usr/local/lib/perl5/site_perl/5.6.0/$archname
+ /usr/local/lib/perl5/site_perl/5.6.0
+
+ /usr/local/lib/perl5/site_perl/5.005/$archname
+ /usr/local/lib/perl5/site_perl/5.005
+ /usr/local/lib/perl5/site_perl/
+
+Assuming the users in your site are still actively using perl 5.6.0 and
+5.005 after you installed 5.6.1, you can continue to install add-on
+extensions using any of perl 5.6.1, 5.6.0, or 5.005. The installations
+of these different versions remain distinct, but remember that the newer
+versions of perl are automatically set up to search the site libraries of
+the older ones. This means that installing a new extension with 5.005
+will make it visible to all three versions. Later, if you install the
+same extension using, say, perl 5.6.1, it will override the 5.005-installed
+version, but only for perl 5.6.1.
+
+This way, you can choose to share compatible extensions, but also upgrade
+to a newer version of an extension that may be incompatible with earlier
+versions, without breaking the earlier versions' installations.
=head2 Maintaining completely separate versions
Many users prefer to keep all versions of perl in completely
-separate directories. One convenient way to do this is by
-using a separate prefix for each version, such as
+separate directories. This guarantees that an update to one version
+won't interfere with another version. (The defaults guarantee this for
+libraries after 5.6.0, but not for executables. TODO?) One convenient
+way to do this is by using a separate prefix for each version, such as
sh Configure -Dprefix=/opt/perl5.004
subversions may not have all the compatibility wrinkles ironed out
yet.
-=head2 Upgrading from 5.004 to 5.005
-
-Extensions compiled with versions of perl prior to 5.004_50 will need
-to be recompiled to be used with 5.004_50 and later.
-
-If you wish to continue using those extensions under 5.004_04, for
-example, then you need to move those extensions from their current
-directories, which are something like
-
- /usr/local/lib/perl5/site_perl/
- /usr/local/lib/perl5/site_perl/archname
-
-to the version-specific directory such as
-
- /usr/local/lib/perl5/archname/5.00404
+=head2 Upgrading from 5.005 to 5.6.0
-as described above.
+Most extensions built and installed with versions of perl
+prior to 5.005_50 will not need to be recompiled to be used with
+5.6.0. If you find you do need to rebuild an extension with 5.6.0,
+you may safely do so without disturbing the 5.005 installation.
+(See L<"Coexistence with earlier versions of perl5"> above.)
-Once you have moved the 5.00404 versions of the extensions out of the
-way, you may recompile and reinstall with 5.005.
+See your installed copy of the perllocal.pod file for a (possibly
+incomplete) list of locally installed modules. Note that you want
+perllocal.pod not perllocale.pod for installed module information.
=head1 Coexistence with perl4
perl4.036. That will not be touched by the perl5 installation
process. Most perl4 scripts should run just fine under perl5.
However, if you have any scripts that require perl4, you can replace
-the #! line at the top of them by #!/usr/local/bin/perl4.036
-(or whatever the appropriate pathname is). See pod/perltrap.pod
-for possible problems running perl4 scripts under perl5.
+the #! line at the top of them by #!/usr/local/bin/perl4.036 (or
+whatever the appropriate pathname is). See pod/perltrap.pod for
+possible problems running perl4 scripts under perl5.
=head1 cd /usr/include; h2ph *.h sys/*.h
-Some perl scripts need to be able to obtain information from
-the system header files. This command will convert the most commonly used
+Some perl scripts need to be able to obtain information from the
+system header files. This command will convert the most commonly used
header files in /usr/include into files that can be easily interpreted
-by perl. These files will be placed in the architectural library directory
-you specified to Configure; by default this is
-/usr/local/lib/perl5/ARCH/VERSION, where ARCH is your architecture
-(such as sun4-solaris) and VERSION is the version of perl you are
-building (for example, 5.004).
-
-Note: Due to differences in the C and perl languages, the
-conversion of the header files is not perfect. You will probably have
-to hand-edit some of the converted files to get them to parse
-correctly. For example, h2ph breaks spectacularly on type casting and
-certain structures.
+by perl. These files will be placed in the architecture-dependent
+library ($archlib) directory you specified to Configure.
+
+Note: Due to differences in the C and perl languages, the conversion
+of the header files is not perfect. You will probably have to
+hand-edit some of the converted files to get them to parse correctly.
+For example, h2ph breaks spectacularly on type casting and certain
+structures.
=head1 installhtml --help
format. The installhtml utility can be used to convert pod
documentation into linked HTML files and install them.
+Currently, the supplied ./installhtml script does not make use of the
+html Configure variables. This should be fixed in a future release.
+
The following command-line is an example of one used to convert
perl documentation:
(cd pod && make tex && <process the latex files>)
-=head1 Reporting Problems
-
-If you have difficulty building perl, and none of the advice in this
-file helps, and careful reading of the error message and the relevant
-manual pages on your system doesn't help either, then you should send a
-message to either the comp.lang.perl.misc newsgroup or to
-perlbug@perl.com with an accurate description of your problem.
+=head1 Minimizing the Perl installation
+
+The following section is meant for people worrying about squeezing the
+Perl installation into minimal systems (for example when installing
+operating systems, or in really small filesystems).
+
+In the following we offer two different slimmed down installation
+recipes. They are informative, not normative: the choice of files
+depends on what you need.
+
+Firstly, the bare minimum to run this script
+
+ use strict;
+ use warnings;
+ foreach my $f (</*>) {
+ print("$f\n");
+ }
+
+in Solaris is as follows (under $Config{prefix}):
+
+ ./bin/perl
+ ./lib/perl5/5.6.1/sun4-solaris-64int/auto/DynaLoader/autosplit.ix
+ ./lib/perl5/5.6.1/sun4-solaris-64int/auto/DynaLoader/dl_expandspec.al
+ ./lib/perl5/5.6.1/sun4-solaris-64int/auto/DynaLoader/dl_find_symbol_anywhere.al
+ ./lib/perl5/5.6.1/sun4-solaris-64int/auto/DynaLoader/dl_findfile.al
+ ./lib/perl5/5.6.1/sun4-solaris-64int/auto/File/Glob/Glob.so
+ ./lib/perl5/5.6.1/sun4-solaris-64int/auto/File/Glob/autosplit.ix
+ ./lib/perl5/5.6.1/sun4-solaris-64int/Config.pm
+ ./lib/perl5/5.6.1/sun4-solaris-64int/XSLoader.pm
+ ./lib/perl5/5.6.1/sun4-solaris-64int/DynaLoader.pm
+ ./lib/perl5/5.6.1/sun4-solaris-64int/CORE/libperl.so
+ ./lib/perl5/5.6.1/strict.pm
+ ./lib/perl5/5.6.1/warnings.pm
+ ./lib/perl5/5.6.1/Carp.pm
+ ./lib/perl5/5.6.1/Exporter.pm
+ ./lib/perl5/5.6.1/File/Glob.pm
+ ./lib/perl5/5.6.1/AutoLoader.pm
+ ./lib/perl5/5.6.1/vars.pm
+ ./lib/perl5/5.6.1/warnings/register.pm
+ ./lib/perl5/5.6.1/Carp/Heavy.pm
+ ./lib/perl5/5.6.1/Exporter/Heavy.pm
+
+Secondly, Debian perl-base package contains the following files,
+size about 1.2MB in its i386 version:
+
+ /usr/share/doc/perl/Documentation
+ /usr/share/doc/perl/README.Debian
+ /usr/share/doc/perl/copyright
+ /usr/share/doc/perl/AUTHORS.gz
+ /usr/share/doc/perl/changelog.Debian.gz
+ /usr/share/man/man1/perl.1.gz
+ /usr/share/perl/5.6.1/AutoLoader.pm
+ /usr/share/perl/5.6.1/Carp.pm
+ /usr/share/perl/5.6.1/Carp/Heavy.pm
+ /usr/share/perl/5.6.1/Cwd.pm
+ /usr/share/perl/5.6.1/Exporter.pm
+ /usr/share/perl/5.6.1/Exporter/Heavy.pm
+ /usr/share/perl/5.6.1/File/Spec.pm
+ /usr/share/perl/5.6.1/File/Spec/Unix.pm
+ /usr/share/perl/5.6.1/FileHandle.pm
+ /usr/share/perl/5.6.1/Getopt/Long.pm
+ /usr/share/perl/5.6.1/IO/Socket/INET.pm
+ /usr/share/perl/5.6.1/IO/Socket/UNIX.pm
+ /usr/share/perl/5.6.1/IPC/Open2.pm
+ /usr/share/perl/5.6.1/IPC/Open3.pm
+ /usr/share/perl/5.6.1/SelectSaver.pm
+ /usr/share/perl/5.6.1/Symbol.pm
+ /usr/share/perl/5.6.1/Text/Tabs.pm
+ /usr/share/perl/5.6.1/Text/Wrap.pm
+ /usr/share/perl/5.6.1/attributes.pm
+ /usr/share/perl/5.6.1/auto/Getopt/Long/GetOptions.al
+ /usr/share/perl/5.6.1/auto/Getopt/Long/FindOption.al
+ /usr/share/perl/5.6.1/auto/Getopt/Long/Configure.al
+ /usr/share/perl/5.6.1/auto/Getopt/Long/config.al
+ /usr/share/perl/5.6.1/auto/Getopt/Long/Croak.al
+ /usr/share/perl/5.6.1/auto/Getopt/Long/autosplit.ix
+ /usr/share/perl/5.6.1/base.pm
+ /usr/share/perl/5.6.1/constant.pm
+ /usr/share/perl/5.6.1/fields.pm
+ /usr/share/perl/5.6.1/integer.pm
+ /usr/share/perl/5.6.1/lib.pm
+ /usr/share/perl/5.6.1/locale.pm
+ /usr/share/perl/5.6.1/overload.pm
+ /usr/share/perl/5.6.1/strict.pm
+ /usr/share/perl/5.6.1/vars.pm
+ /usr/share/perl/5.6.1/warnings.pm
+ /usr/share/perl/5.6.1/warnings/register.pm
+ /usr/bin/perl
+ /usr/lib/perl/5.6.1/Config.pm
+ /usr/lib/perl/5.6.1/Data/Dumper.pm
+ /usr/lib/perl/5.6.1/DynaLoader.pm
+ /usr/lib/perl/5.6.1/Errno.pm
+ /usr/lib/perl/5.6.1/Fcntl.pm
+ /usr/lib/perl/5.6.1/File/Glob.pm
+ /usr/lib/perl/5.6.1/IO.pm
+ /usr/lib/perl/5.6.1/IO/File.pm
+ /usr/lib/perl/5.6.1/IO/Handle.pm
+ /usr/lib/perl/5.6.1/IO/Pipe.pm
+ /usr/lib/perl/5.6.1/IO/Seekable.pm
+ /usr/lib/perl/5.6.1/IO/Select.pm
+ /usr/lib/perl/5.6.1/IO/Socket.pm
+ /usr/lib/perl/5.6.1/POSIX.pm
+ /usr/lib/perl/5.6.1/Socket.pm
+ /usr/lib/perl/5.6.1/XSLoader.pm
+ /usr/lib/perl/5.6.1/auto/Data/Dumper/Dumper.so
+ /usr/lib/perl/5.6.1/auto/Data/Dumper/Dumper.bs
+ /usr/lib/perl/5.6.1/auto/DynaLoader/dl_findfile.al
+ /usr/lib/perl/5.6.1/auto/DynaLoader/dl_expandspec.al
+ /usr/lib/perl/5.6.1/auto/DynaLoader/dl_find_symbol_anywhere.al
+ /usr/lib/perl/5.6.1/auto/DynaLoader/autosplit.ix
+ /usr/lib/perl/5.6.1/auto/DynaLoader/DynaLoader.a
+ /usr/lib/perl/5.6.1/auto/DynaLoader/extralibs.ld
+ /usr/lib/perl/5.6.1/auto/Fcntl/Fcntl.so
+ /usr/lib/perl/5.6.1/auto/Fcntl/Fcntl.bs
+ /usr/lib/perl/5.6.1/auto/File/Glob/Glob.bs
+ /usr/lib/perl/5.6.1/auto/File/Glob/Glob.so
+ /usr/lib/perl/5.6.1/auto/File/Glob/autosplit.ix
+ /usr/lib/perl/5.6.1/auto/IO/IO.so
+ /usr/lib/perl/5.6.1/auto/IO/IO.bs
+ /usr/lib/perl/5.6.1/auto/POSIX/POSIX.bs
+ /usr/lib/perl/5.6.1/auto/POSIX/POSIX.so
+ /usr/lib/perl/5.6.1/auto/POSIX/autosplit.ix
+ /usr/lib/perl/5.6.1/auto/POSIX/load_imports.al
+ /usr/lib/perl/5.6.1/auto/Socket/Socket.so
+ /usr/lib/perl/5.6.1/auto/Socket/Socket.bs
-Please include the output of the ./myconfig shell script
-that comes with the distribution. Alternatively, you can use the
-perlbug program that comes with the perl distribution,
-but you need to have perl compiled and installed before you can use it.
+=head1 Reporting Problems
-You might also find helpful information in the Porting
-directory of the perl distribution.
+If you have difficulty building perl, and none of the advice in this file
+helps, and careful reading of the error message and the relevant manual
+pages on your system doesn't help either, then you should send a message
+to either the comp.lang.perl.misc newsgroup or to perlbug@perl.org with
+an accurate description of your problem.
+
+Please include the output of the ./myconfig shell script that comes with
+the distribution. Alternatively, you can use the perlbug program that
+comes with the perl distribution, but you need to have perl compiled
+before you can use it. (If you have not installed it yet, you need to
+run C<./perl -Ilib utils/perlbug> instead of a plain C<perlbug>.)
+
+Please try to make your message brief but clear. Trim out unnecessary
+information. Do not include large files (such as config.sh or a complete
+Configure or make log) unless absolutely necessary. Do not include a
+complete transcript of your build session. Just include the failing
+commands, the relevant error messages, and whatever preceding commands
+are necessary to give the appropriate context. Plain text should
+usually be sufficient--fancy attachments or encodings may actually
+reduce the number of people who read your message. Your message
+will get relayed to over 400 subscribers around the world so please
+try to keep it brief but clear.
=head1 DOCUMENTATION
-Read the manual entries before running perl. The main documentation is
-in the pod/ subdirectory and should have been installed during the
+Read the manual entries before running perl. The main documentation
+is in the pod/ subdirectory and should have been installed during the
build process. Type B<man perl> to get started. Alternatively, you
-can type B<perldoc perl> to use the supplied perldoc script. This
-is sometimes useful for finding things in the library modules.
+can type B<perldoc perl> to use the supplied perldoc script. This is
+sometimes useful for finding things in the library modules.
Under UNIX, you can produce a documentation book in postscript form,
-along with its table of contents, by going to the pod/ subdirectory
-and running (either):
+along with its table of contents, by going to the pod/ subdirectory and
+running (either):
./roffitall -groff # If you have GNU groff installed
./roffitall -psroff # If you have psroff
(You may need to fix the roffitall command to use your local troff
set-up.)
-Note that you must have performed the installation already before
-running the above, since the script collects the installed files to
-generate the documentation.
+Note that you must have performed the installation already before running
+the above, since the script collects the installed files to generate
+the documentation.
=head1 AUTHOR
-Original author: Andy Dougherty doughera@lafcol.lafayette.edu ,
-borrowing very heavily from the original README by Larry Wall,
-with lots of helpful feedback and additions from the
-perl5-porters@perl.org folks.
+Original author: Andy Dougherty doughera@lafayette.edu , borrowing very
+heavily from the original README by Larry Wall, with lots of helpful
+feedback and additions from the perl5-porters@perl.org folks.
-If you have problems or questions, please see L<"Reporting Problems">
-above.
+If you have problems, corrections, or questions, please see
+L<"Reporting Problems"> above.
-=head1 LAST MODIFIED
+=head1 REDISTRIBUTION
-$Id: INSTALL,v 1.32 1998/03/20 19:20:08 doughera Released $
+This document is part of the Perl package and may be distributed under
+the same terms as perl itself, with the following additional request:
+If you are distributing a modified version of perl (perhaps as part of
+a larger package) please B<do> modify these installation instructions
+and the contact information to match your distribution.
https://perl5.git.perl.org / perl5.git / blobdiff