Regenerate Configure.

[perl5.git] / Porting / Glossary

diff --git a/Porting/Glossary b/Porting/Glossary
index 4f1cbf4..46fb810 100644 (file)
--- a/Porting/Glossary
+++ b/Porting/Glossary
@@ -38,16 +38,18 @@ aphostname (d_gethname.U):
        it safe when used by a process with super-user privileges.
 
 apiversion (patchlevel.U):
        it safe when used by a process with super-user privileges.
 
 apiversion (patchlevel.U):

-       This is a number which identifies the lowest version of perl
-       to have an API (for XS extensions) compatible with the present
-       version.  For example, for 5.005_01, the apiversion should be
-       5.005, since 5.005_01 should be binary compatible with 5.005.
-       This should probably be incremented manually somehow, perhaps
-       from patchlevel.h.  For now, we'll guess maintenance subversions
-       will retain binary compatibility.
+       MakeMaker will install add-on modules in a directory with the
+       PERL_APIVERSION version number.  The value is set manually in
+       patchlevel.h.  Normally, for maintenance releases, this is
+       just something like 5.005 or 5.6 or 5.7.  That is, it does not
+       include the subversion number and does not change across
+       maintenance releases.  This is so that add-on extensions can
+       be shared across maintenance versions.  It is unclear how this
+       ought to work for developer versions.  If a release breaks
+       binary compatibility, this number should be increased.

 
 ar (Loc.U):
 
 ar (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the ar program.  After Configure runs,
        the value is reset to a plain "ar" and is not useful.
 
        full pathname (if any) of the ar program.  After Configure runs,
        the value is reset to a plain "ar" and is not useful.
 


@@ -77,7 +79,7 @@ archobjs (Unix.U):
        include os2/os2.obj.
 
 awk (Loc.U):
        include os2/os2.obj.
 
 awk (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the awk program.  After Configure runs,
        the value is reset to a plain "awk" and is not useful.
 
        full pathname (if any) of the awk program.  After Configure runs,
        the value is reset to a plain "awk" and is not useful.
 


@@ -94,6 +96,10 @@ bin (bin.U):
        is most often a local directory such as /usr/local/bin. Programs using
        this variable must be prepared to deal with ~name substitution.
 
        is most often a local directory such as /usr/local/bin. Programs using
        this variable must be prepared to deal with ~name substitution.
 

+bincompat5005 (bincompat5005.U):
+       This variable contains y if Perl 5.006 should be binary-compatible
+       with Perl 5.005.
+

 binexp (bin.U):
        This is the same as the bin variable, but is filename expanded at
        configuration time, for use in your makefiles.
 binexp (bin.U):
        This is the same as the bin variable, but is filename expanded at
        configuration time, for use in your makefiles.


@@ -103,7 +109,7 @@ bison (Loc.U):
        The value is a plain '' and is not useful.
 
 byacc (Loc.U):
        The value is a plain '' and is not useful.
 
 byacc (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the byacc program.  After Configure runs,
        the value is reset to a plain "byacc" and is not useful.
 
        full pathname (if any) of the byacc program.  After Configure runs,
        the value is reset to a plain "byacc" and is not useful.
 


@@ -127,7 +133,7 @@ castflags (d_castneg.U):
        4 = couldn't cast in argument expression list
 
 cat (Loc.U):
        4 = couldn't cast in argument expression list
 
 cat (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the cat program.  After Configure runs,
        the value is reset to a plain "cat" and is not useful.
 
        full pathname (if any) of the cat program.  After Configure runs,
        the value is reset to a plain "cat" and is not useful.
 


@@ -188,7 +194,7 @@ clocktype (d_times.U):
        included).
 
 comm (Loc.U):
        included).
 
 comm (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the comm program.  After Configure runs,
        the value is reset to a plain "comm" and is not useful.
 
        full pathname (if any) of the comm program.  After Configure runs,
        the value is reset to a plain "comm" and is not useful.
 


@@ -203,7 +209,7 @@ contains (contains.U):
        is primarily for the use of other Configure units.
 
 cp (Loc.U):
        is primarily for the use of other Configure units.
 
 cp (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the cp program.  After Configure runs,
        the value is reset to a plain "cp" and is not useful.
 
        full pathname (if any) of the cp program.  After Configure runs,
        the value is reset to a plain "cp" and is not useful.
 


@@ -212,7 +218,7 @@ cpio (Loc.U):
        The value is a plain '' and is not useful.
 
 cpp (Loc.U):
        The value is a plain '' and is not useful.
 
 cpp (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the cpp program.  After Configure runs,
        the value is reset to a plain "cpp" and is not useful.
 
        full pathname (if any) of the cpp program.  After Configure runs,
        the value is reset to a plain "cpp" and is not useful.
 


@@ -271,7 +277,7 @@ cryptlib (d_crypt.U):
        up to the Makefile to use this.
 
 csh (Loc.U):
        up to the Makefile to use this.
 
 csh (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the csh program.  After Configure runs,
        the value is reset to a plain "csh" and is not useful.
 
        full pathname (if any) of the csh program.  After Configure runs,
        the value is reset to a plain "csh" and is not useful.
 


@@ -292,6 +298,14 @@ d_archlib (archlib.U):
        of architecture-dependent library files for $package.  If
        $archlib is the same as $privlib, then this is set to undef.
 
        of architecture-dependent library files for $package.  If
        $archlib is the same as $privlib, then this is set to undef.
 

+d_atolf (atolf.U):
+       This variable conditionally defines the HAS_ATOLF symbol, which
+       indicates to the C program that the atolf() routine is available.
+
+d_atoll (atoll.U):
+       This variable conditionally defines the HAS_ATOLL symbol, which
+       indicates to the C program that the atoll() routine is available.
+

 d_attribut (d_attribut.U):
        This variable conditionally defines HASATTRIBUTE, which
        indicates the C compiler can check for function attributes,
 d_attribut (d_attribut.U):
        This variable conditionally defines HASATTRIBUTE, which
        indicates the C compiler can check for function attributes,


@@ -305,6 +319,12 @@ d_bcopy (d_bcopy.U):
        This variable conditionally defines the HAS_BCOPY symbol if
        the bcopy() routine is available to copy strings.
 
        This variable conditionally defines the HAS_BCOPY symbol if
        the bcopy() routine is available to copy strings.
 

+d_bincompat5005 (bincompat5005.U):
+       This variable conditionally defines BINCOMPAT5005 so that embed.h
+       can take special action if Perl 5.006 should be binary-compatible
+       with Perl 5.005.  This is impossible for builds that use features
+       like threads and multiplicity it is always $undef for those versions.
+

 d_bsd (Guess.U):
        This symbol conditionally defines the symbol BSD when running on a
        BSD system.
 d_bsd (Guess.U):
        This symbol conditionally defines the symbol BSD when running on a
        BSD system.


@@ -380,25 +400,10 @@ d_dbl_dig (d_dbl_dig.U):
        header files provide DBL_DIG, which is the number of significant
        digits in a double precision number.
 
        header files provide DBL_DIG, which is the number of significant
        digits in a double precision number.
 

-d_dbmclose64 (dbm64.U):
-       This variable conditionally defines the HAS_DBMCLOSE64 symbol, which
-       indicates to the C program that the dbmclose64() routine is available.
-
-d_dbminit64 (dbm64.U):
-       This variable conditionally defines the HAS_DBMINIT64 symbol, which
-       indicates to the C program that the dbminit64() routine is available.
-
-d_delete64 (dbm64.U):
-       This variable conditionally defines the HAS_DELETE64 symbol, which
-       indicates to the C program that the delete64() routine is available.
-

 d_difftime (d_difftime.U):
        This variable conditionally defines the HAS_DIFFTIME symbol, which
        indicates to the C program that the difftime() routine is available.
 
 d_difftime (d_difftime.U):
        This variable conditionally defines the HAS_DIFFTIME symbol, which
        indicates to the C program that the difftime() routine is available.
 

-d_dirent64_s (io64.U):
-       This symbol will be defined if the C compiler supports struct dirent64.
-

 d_dirnamlen (i_dirent.U):
        This variable conditionally defines DIRNAMLEN, which indicates
        to the C program that the length of directory entry names is
 d_dirnamlen (i_dirent.U):
        This variable conditionally defines DIRNAMLEN, which indicates
        to the C program that the length of directory entry names is


@@ -504,37 +509,18 @@ d_fds_bits (d_fd_set.U):
        a half-fast job and neglected to provide the macros to manipulate
        an fd_set, HAS_FDS_BITS will let us know how to fix the gaffe.
 
        a half-fast job and neglected to provide the macros to manipulate
        an fd_set, HAS_FDS_BITS will let us know how to fix the gaffe.
 

-d_fetch64 (dbm64.U):
-       This variable conditionally defines the HAS_FETCH64 symbol, which
-       indicates to the C program that the fetch64() routine is available.
-
-d_fgetpos64 (stdio64.U):
-       This variable conditionally defines the HAS_FGETPOS64 symbol, which
-       indicates to the C program that the fgetpos64() routine is available.
-

 d_fgetpos (d_fgetpos.U):
        This variable conditionally defines HAS_FGETPOS if fgetpos() is
        available to get the file position indicator.
 
 d_fgetpos (d_fgetpos.U):
        This variable conditionally defines HAS_FGETPOS if fgetpos() is
        available to get the file position indicator.
 

-d_firstkey64 (dbm64.U):
-       This variable conditionally defines the HAS_FIRSTKEY64 symbol, which
-       indicates to the C program that the firstkey64() routine is available.
-

 d_flexfnam (d_flexfnam.U):
        This variable conditionally defines the FLEXFILENAMES symbol, which
        indicates that the system supports filenames longer than 14 characters.
 
 d_flexfnam (d_flexfnam.U):
        This variable conditionally defines the FLEXFILENAMES symbol, which
        indicates that the system supports filenames longer than 14 characters.
 

-d_flock64_s (io64.U):
-       This symbol will be defined if the C compiler supports struct flock64.
-

 d_flock (d_flock.U):
        This variable conditionally defines HAS_FLOCK if flock() is
        available to do file locking.
 
 d_flock (d_flock.U):
        This variable conditionally defines HAS_FLOCK if flock() is
        available to do file locking.
 

-d_fopen64 (stdio64.U):
-       This variable conditionally defines the HAS_FOPEN64 symbol, which
-       indicates to the C program that the fopen64() routine is available.
-

 d_fork (d_fork.U):
        This variable conditionally defines the HAS_FORK symbol, which
        indicates to the C program that the fork() routine is available.
 d_fork (d_fork.U):
        This variable conditionally defines the HAS_FORK symbol, which
        indicates to the C program that the fork() routine is available.


@@ -545,34 +531,17 @@ d_fpathconf (d_pathconf.U):
        to determine file-system related limits and options associated
        with a given open file descriptor.
 
        to determine file-system related limits and options associated
        with a given open file descriptor.
 

-d_freopen64 (stdio64.U):
-       This variable conditionally defines the HAS_FREOPEN64 symbol, which
-       indicates to the C program that the freopen64() routine is available.
-
-d_fseek64 (stdio64.U):
-       This variable conditionally defines the HAS_FSEEK64 symbol, which
-       indicates to the C program that the fseek64() routine is available.
-
-d_fseeko64 (stdio64.U):
-       This variable conditionally defines the HAS_FSEEKO64 symbol, which
-       indicates to the C program that the fseeko64() routine is available.
+d_fpos64_t (io64.U):
+       This symbol will be defined if the C compiler supports fpos64_t.

 
 d_fseeko (d_fseeko.U):
        This variable conditionally defines the HAS_FSEEKO symbol, which
        indicates to the C program that the fseeko() routine is available.
 
 
 d_fseeko (d_fseeko.U):
        This variable conditionally defines the HAS_FSEEKO symbol, which
        indicates to the C program that the fseeko() routine is available.
 

-d_fsetpos64 (stdio64.U):
-       This variable conditionally defines the HAS_FSETPOS64 symbol, which
-       indicates to the C program that the fsetpos64() routine is available.
-

 d_fsetpos (d_fsetpos.U):
        This variable conditionally defines HAS_FSETPOS if fsetpos() is
        available to set the file position indicator.
 
 d_fsetpos (d_fsetpos.U):
        This variable conditionally defines HAS_FSETPOS if fsetpos() is
        available to set the file position indicator.
 

-d_fstat64 (io64.U):
-       This variable conditionally defines the HAS_FSTAT64 symbol, which
-       indicates to the C program that the fstat64() routine is available.
-

 d_fstatfs (d_statfs.U):
        This variable conditionally defines the HAS_FSTATFS symbol, which
        indicates to the C program that the fstatfs() routine is available.
 d_fstatfs (d_statfs.U):
        This variable conditionally defines the HAS_FSTATFS symbol, which
        indicates to the C program that the fstatfs() routine is available.


@@ -581,14 +550,6 @@ d_fstatvfs (d_statvfs.U):
        This variable conditionally defines the HAS_FSTATVFS symbol, which
        indicates to the C program that the fstatvfs() routine is available.
 
        This variable conditionally defines the HAS_FSTATVFS symbol, which
        indicates to the C program that the fstatvfs() routine is available.
 

-d_ftell64 (stdio64.U):
-       This variable conditionally defines the HAS_FTELL64 symbol, which
-       indicates to the C program that the ftell64() routine is available.
-
-d_ftello64 (stdio64.U):
-       This variable conditionally defines the HAS_FTELLO64 symbol, which
-       indicates to the C program that the ftello64() routine is available.
-

 d_ftello (d_ftello.U):
        This variable conditionally defines the HAS_FTELLO symbol, which
        indicates to the C program that the ftello() routine is available.
 d_ftello (d_ftello.U):
        This variable conditionally defines the HAS_FTELLO symbol, which
        indicates to the C program that the ftello() routine is available.


@@ -598,10 +559,6 @@ d_ftime (d_ftime.U):
        that the ftime() routine exists.  The ftime() routine is basically
        a sub-second accuracy clock.
 
        that the ftime() routine exists.  The ftime() routine is basically
        a sub-second accuracy clock.
 

-d_ftruncate64 (io64.U):
-       This variable conditionally defines the HAS_FTRUNCATE64 symbol, which
-       indicates to the C program that the ftruncate64() routine is available.
-

 d_Gconvert (d_gconvert.U):
        This variable holds what Gconvert is defined as to convert
        floating point numbers into strings. It could be 'gconvert'
 d_Gconvert (d_gconvert.U):
        This variable holds what Gconvert is defined as to convert
        floating point numbers into strings. It could be 'gconvert'


@@ -786,9 +743,6 @@ d_inetaton (d_inetaton.U):
        indicates to the C program that the inet_aton() function is available
        to parse IP address "dotted-quad" strings.
 
        indicates to the C program that the inet_aton() function is available
        to parse IP address "dotted-quad" strings.
 

-d_ino64_t (io64.U):
-       This symbol will be defined if the C compiler supports ino64_t.
-

 d_int64t (i_inttypes.U):
        This symbol will be defined if the C compiler supports int64_t.
 
 d_int64t (i_inttypes.U):
        This symbol will be defined if the C compiler supports int64_t.
 


@@ -810,6 +764,11 @@ d_lchown (d_lchown.U):
        indicates to the C program that the lchown() routine is available
        to operate on a symbolic link (instead of following the link).
 
        indicates to the C program that the lchown() routine is available
        to operate on a symbolic link (instead of following the link).
 

+d_ldbl_dig (d_ldbl_dig.U):
+       This variable conditionally defines d_ldbl_dig if this system's
+       header files provide LDBL_DIG, which is the number of significant
+       digits in a long double precision number.
+

 d_link (d_link.U):
        This variable conditionally defines HAS_LINK if link() is
        available to create hard links.
 d_link (d_link.U):
        This variable conditionally defines HAS_LINK if link() is
        available to create hard links.


@@ -822,10 +781,6 @@ d_locconv (d_locconv.U):
        This variable conditionally defines HAS_LOCALECONV if localeconv() is
        available for numeric and monetary formatting conventions.
 
        This variable conditionally defines HAS_LOCALECONV if localeconv() is
        available for numeric and monetary formatting conventions.
 

-d_lockf64 (io64.U):
-       This variable conditionally defines the HAS_LOCKF64 symbol, which
-       indicates to the C program that the lockf64() routine is available.
-

 d_lockf (d_lockf.U):
        This variable conditionally defines HAS_LOCKF if lockf() is
        available to do file locking.
 d_lockf (d_lockf.U):
        This variable conditionally defines HAS_LOCKF if lockf() is
        available to do file locking.


@@ -838,14 +793,6 @@ d_longlong (d_longlong.U):
        This variable conditionally defines HAS_LONG_LONG if 
        the long long type is supported.
 
        This variable conditionally defines HAS_LONG_LONG if 
        the long long type is supported.
 

-d_lseek64 (io64.U):
-       This variable conditionally defines the HAS_LSEEK64 symbol, which
-       indicates to the C program that the lseek64() routine is available.
-
-d_lstat64 (io64.U):
-       This variable conditionally defines the HAS_LSTAT64 symbol, which
-       indicates to the C program that the lstat64() routine is available.
-

 d_lstat (d_lstat.U):
        This variable conditionally defines HAS_LSTAT if lstat() is
        available to do file stats on symbolic links.
 d_lstat (d_lstat.U):
        This variable conditionally defines HAS_LSTAT if lstat() is
        available to do file stats on symbolic links.


@@ -977,10 +924,6 @@ d_mymalloc (mallocsrc.U):
        of the source want to take special action if MYMALLOC is used.
        This may include different sorts of profiling or error detection.
 
        of the source want to take special action if MYMALLOC is used.
        This may include different sorts of profiling or error detection.
 

-d_nextkey64 (dbm64.U):
-       This variable conditionally defines the HAS_NEXTKEY64 symbol, which
-       indicates to the C program that the nextkey64() routine is available.
-

 d_nice (d_nice.U):
        This variable conditionally defines the HAS_NICE symbol, which
        indicates to the C program that the nice() routine is available.
 d_nice (d_nice.U):
        This variable conditionally defines the HAS_NICE symbol, which
        indicates to the C program that the nice() routine is available.


@@ -988,9 +931,6 @@ d_nice (d_nice.U):
 d_off64_t (io64.U):
        This symbol will be defined if the C compiler supports off64_t.
 
 d_off64_t (io64.U):
        This symbol will be defined if the C compiler supports off64_t.
 

-d_offset_t (io64.U):
-       This symbol will be defined if the C compiler supports offset_t.
-

 d_old_pthread_create_joinable (d_pthrattrj.U):
        This variable conditionally defines pthread_create_joinable.
        undef if pthread.h defines PTHREAD_CREATE_JOINABLE.
 d_old_pthread_create_joinable (d_pthrattrj.U):
        This variable conditionally defines pthread_create_joinable.
        undef if pthread.h defines PTHREAD_CREATE_JOINABLE.


@@ -998,7 +938,7 @@ d_old_pthread_create_joinable (d_pthrattrj.U):
 d_oldpthreads (usethreads.U):
        This variable conditionally defines the OLD_PTHREADS_API symbol,
        and indicates that Perl should be built to use the old
 d_oldpthreads (usethreads.U):
        This variable conditionally defines the OLD_PTHREADS_API symbol,
        and indicates that Perl should be built to use the old

-       draft POSIX threads API.  This is only potneially meaningful if
+       draft POSIX threads API.  This is only potentially meaningful if

        usethreads is set.
 
 d_oldsock (d_socket.U):
        usethreads is set.
 
 d_oldsock (d_socket.U):


@@ -1010,14 +950,6 @@ d_open3 (d_open3.U):
        which indicates to the C program that the 3 argument version of
        the open(2) function is available.
 
        which indicates to the C program that the 3 argument version of
        the open(2) function is available.
 

-d_open64 (io64.U):
-       This variable conditionally defines the HAS_OPEN64 symbol, which
-       indicates to the C program that the open64() routine is available.
-
-d_opendir64 (io64.U):
-       This variable conditionally defines the HAS_OPENDIR64 symbol, which
-       indicates to the C program that the opendir64() routine is available.
-

 d_pathconf (d_pathconf.U):
        This variable conditionally defines the HAS_PATHCONF symbol, which
        indicates to the C program that the pathconf() routine is available
 d_pathconf (d_pathconf.U):
        This variable conditionally defines the HAS_PATHCONF symbol, which
        indicates to the C program that the pathconf() routine is available


@@ -1049,6 +981,55 @@ d_portable (d_portable.U):
        indicates to the C program that it should not assume that it is
        running on the machine it was compiled on.
 
        indicates to the C program that it should not assume that it is
        running on the machine it was compiled on.
 

+d_PRId64 (quadfio.U):
+       This variable conditionally defines the PERL_PRId64 symbol, which
+       indiciates that stdio has a symbol to print 64-bit decimal numbers.
+
+d_PRIeldbl (longdblfio.U):
+       This variable conditionally defines the PERL_PRIfldlbl symbol, which
+       indiciates that stdio has a symbol to print long doubles.
+
+d_PRIEldbl (longdblfio.U):
+       This variable conditionally defines the PERL_PRIfldlbl symbol, which
+       indiciates that stdio has a symbol to print long doubles.
+
+d_PRIfldbl (longdblfio.U):
+       This variable conditionally defines the PERL_PRIfldlbl symbol, which
+       indiciates that stdio has a symbol to print long doubles.
+
+d_PRIFldbl (longdblfio.U):
+       This variable conditionally defines the PERL_PRIfldlbl symbol, which
+       indiciates that stdio has a symbol to print long doubles.
+
+d_PRIgldbl (longdblfio.U):
+       This variable conditionally defines the PERL_PRIfldlbl symbol, which
+       indiciates that stdio has a symbol to print long doubles.
+
+d_PRIGldbl (longdblfio.U):
+       This variable conditionally defines the PERL_PRIfldlbl symbol, which
+       indiciates that stdio has a symbol to print long doubles.
+
+d_PRIi64 (quadfio.U):
+       This variable conditionally defines the PERL_PRIi64 symbol, which
+       indiciates that stdio has a symbol to print 64-bit decimal numbers.
+
+d_PRIo64 (quadfio.U):
+       This variable conditionally defines the PERL_PRIo64 symbol, which
+       indiciates that stdio has a symbol to print 64-bit octal numbers.
+
+d_PRIu64 (quadfio.U):
+       This variable conditionally defines the PERL_PRIu64 symbol, which
+       indiciates that stdio has a symbol to print 64-bit unsigned decimal
+       numbers.
+
+d_PRIx64 (quadfio.U):
+       This variable conditionally defines the PERL_PRIx64 symbol, which
+       indiciates that stdio has a symbol to print 64-bit hexadecimal numbers.
+
+d_PRIX64 (quadfio.U):
+       This variable conditionally defines the PERL_PRIX64 symbol, which
+       indiciates that stdio has a symbol to print 64-bit hExADECimAl numbers.
+

 d_pthread_yield (d_pthread_y.U):
        This variable conditionally defines the HAS_PTHREAD_YIELD
        symbol if the pthread_yield routine is available to yield
 d_pthread_yield (d_pthread_y.U):
        This variable conditionally defines the HAS_PTHREAD_YIELD
        symbol if the pthread_yield routine is available to yield


@@ -1086,10 +1067,6 @@ d_pwquota (i_pwd.U):
        This variable conditionally defines PWQUOTA, which indicates
        that struct passwd contains pw_quota.
 
        This variable conditionally defines PWQUOTA, which indicates
        that struct passwd contains pw_quota.
 

-d_readdir64 (io64.U):
-       This variable conditionally defines the HAS_READDIR64 symbol, which
-       indicates to the C program that the readdir64() routine is available.
-

 d_readdir (d_readdir.U):
        This variable conditionally defines HAS_READDIR if readdir() is
        available to read directory entries.
 d_readdir (d_readdir.U):
        This variable conditionally defines HAS_READDIR if readdir() is
        available to read directory entries.


@@ -1143,10 +1120,6 @@ d_scm_rights (d_socket.U):
        which indicates that the SCM_RIGHTS is available.  #ifdef is
        not enough because it may be an enum, glibc has been known to do this.
 
        which indicates that the SCM_RIGHTS is available.  #ifdef is
        not enough because it may be an enum, glibc has been known to do this.
 

-d_seekdir64 (io64.U):
-       This variable conditionally defines the HAS_SEEKDIR64 symbol, which
-       indicates to the C program that the seekdir64() routine is available.
-

 d_seekdir (d_readdir.U):
        This variable conditionally defines HAS_SEEKDIR if seekdir() is
        available.
 d_seekdir (d_readdir.U):
        This variable conditionally defines HAS_SEEKDIR if seekdir() is
        available.


@@ -1341,10 +1314,6 @@ d_sockpair (d_socket.U):
        This variable conditionally defines the HAS_SOCKETPAIR symbol, which
        indicates that the BSD socketpair() is supported.
 
        This variable conditionally defines the HAS_SOCKETPAIR symbol, which
        indicates that the BSD socketpair() is supported.
 

-d_stat64 (io64.U):
-       This variable conditionally defines the HAS_STAT64 symbol, which
-       indicates to the C program that the stat64() routine is available.
-

 d_statblks (d_statblks.U):
        This variable conditionally defines USE_STAT_BLOCKS
        if this system has a stat structure declaring
 d_statblks (d_statblks.U):
        This variable conditionally defines USE_STAT_BLOCKS
        if this system has a stat structure declaring


@@ -1386,10 +1355,6 @@ d_stdstdio (d_stdstdio.U):
        has a FILE structure declaring usable _ptr and _cnt fields (or
        equivalent) in stdio.h.
 
        has a FILE structure declaring usable _ptr and _cnt fields (or
        equivalent) in stdio.h.
 

-d_store64 (dbm64.U):
-       This variable conditionally defines the HAS_STORE64 symbol, which
-       indicates to the C program that the store64() routine is available.
-

 d_strchr (d_strchr.U):
        This variable conditionally defines HAS_STRCHR if strchr() and
        strrchr() are available for string searching.
 d_strchr (d_strchr.U):
        This variable conditionally defines HAS_STRCHR if strchr() and
        strrchr() are available for string searching.


@@ -1428,6 +1393,10 @@ d_strtoul (d_strtoul.U):
        indicates to the C program that the strtoul() routine is available
        to provide conversion of strings to unsigned long.
 
        indicates to the C program that the strtoul() routine is available
        to provide conversion of strings to unsigned long.
 

+d_strtoull (strtoull.U):
+       This variable conditionally defines the HAS_STRTOULL symbol, which
+       indicates to the C program that the strtoull() routine is available.
+

 d_strxfrm (d_strxfrm.U):
        This variable conditionally defines HAS_STRXFRM if strxfrm() is
        available to transform strings.
 d_strxfrm (d_strxfrm.U):
        This variable conditionally defines HAS_STRXFRM if strxfrm() is
        available to transform strings.


@@ -1472,10 +1441,6 @@ d_tcsetpgrp (d_tcstpgrp.U):
        indicates to the C program that the tcsetpgrp() routine is available
        to set foreground process group ID.
 
        indicates to the C program that the tcsetpgrp() routine is available
        to set foreground process group ID.
 

-d_telldir64 (io64.U):
-       This variable conditionally defines the HAS_TELLDIR64 symbol, which
-       indicates to the C program that the telldir64() routine is available.
-

 d_telldir (d_readdir.U):
        This variable conditionally defines HAS_TELLDIR if telldir() is
        available.
 d_telldir (d_readdir.U):
        This variable conditionally defines HAS_TELLDIR if telldir() is
        available.


@@ -1496,14 +1461,6 @@ d_times (d_times.U):
        that the times() routine exists.  The times() routine is normaly
        provided on UNIX systems. You may have to include <sys/times.h>.
 
        that the times() routine exists.  The times() routine is normaly
        provided on UNIX systems. You may have to include <sys/times.h>.
 

-d_tmpfile64 (stdio64.U):
-       This variable conditionally defines the HAS_TMPFILE64 symbol, which
-       indicates to the C program that the tmpfile64() routine is available.
-
-d_truncate64 (io64.U):
-       This variable conditionally defines the HAS_TRUNCATE64 symbol, which
-       indicates to the C program that the truncate64() routine is available.
-

 d_truncate (d_truncate.U):
        This variable conditionally defines HAS_TRUNCATE if truncate() is
        available to truncate files.
 d_truncate (d_truncate.U):
        This variable conditionally defines HAS_TRUNCATE if truncate() is
        available to truncate files.


@@ -1585,7 +1542,7 @@ d_xenix (Guess.U):
        the C program that it runs under Xenix.
 
 date (Loc.U):
        the C program that it runs under Xenix.
 
 date (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the date program.  After Configure runs,
        the value is reset to a plain "date" and is not useful.
 
        full pathname (if any) of the date program.  After Configure runs,
        the value is reset to a plain "date" and is not useful.
 


@@ -1642,12 +1599,12 @@ ebcdic (ebcdic.U):
        See trnl.U
 
 echo (Loc.U):
        See trnl.U
 
 echo (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the echo program.  After Configure runs,
        the value is reset to a plain "echo" and is not useful.
 
 egrep (Loc.U):
        full pathname (if any) of the echo program.  After Configure runs,
        the value is reset to a plain "echo" and is not useful.
 
 egrep (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the egrep program.  After Configure runs,
        the value is reset to a plain "egrep" and is not useful.
 
        full pathname (if any) of the egrep program.  After Configure runs,
        the value is reset to a plain "egrep" and is not useful.
 


@@ -1664,7 +1621,7 @@ exe_ext (Unix.U):
        This is an old synonym for _exe.
 
 expr (Loc.U):
        This is an old synonym for _exe.
 
 expr (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the expr program.  After Configure runs,
        the value is reset to a plain "expr" and is not useful.
 
        full pathname (if any) of the expr program.  After Configure runs,
        the value is reset to a plain "expr" and is not useful.
 


@@ -1742,7 +1699,7 @@ glibpth (libpth.U):
        this platform, libpth is the cleaned-up version.
 
 grep (Loc.U):
        this platform, libpth is the cleaned-up version.
 
 grep (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the grep program.  After Configure runs,
        the value is reset to a plain "grep" and is not useful.
 
        full pathname (if any) of the grep program.  After Configure runs,
        the value is reset to a plain "grep" and is not useful.
 


@@ -1758,7 +1715,7 @@ groupstype (groupstype.U):
        gidtype (gid_t), but sometimes it isn't.
 
 gzip (Loc.U):
        gidtype (gid_t), but sometimes it isn't.
 
 gzip (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the gzip program.  After Configure runs,
        the value is reset to a plain "gzip" and is not useful.
 
        full pathname (if any) of the gzip program.  After Configure runs,
        the value is reset to a plain "gzip" and is not useful.
 


@@ -1896,7 +1853,7 @@ i_poll (i_poll.U):
        whether a C program should include <poll.h>.
 
 i_pthread (i_pthread.U):
        whether a C program should include <poll.h>.
 
 i_pthread (i_pthread.U):

-       This variable conditionally defines the I_PTHREADEAD symbol,
+       This variable conditionally defines the I_PTHREAD symbol,

        and indicates whether a C program should include <pthread.h>.
 
 i_pwd (i_pwd.U):
        and indicates whether a C program should include <pthread.h>.
 
 i_pwd (i_pwd.U):


@@ -2217,7 +2174,7 @@ ldlibpthname (libperl.U):
        string, the hints file must set this to 'none'.
 
 less (Loc.U):
        string, the hints file must set this to 'none'.
 
 less (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the less program.  After Configure runs,
        the value is reset to a plain "less" and is not useful.
 
        full pathname (if any) of the less program.  After Configure runs,
        the value is reset to a plain "less" and is not useful.
 


@@ -2261,7 +2218,7 @@ lkflags (ccflags.U):
        the user.  It is up to the Makefile to use this.
 
 ln (Loc.U):
        the user.  It is up to the Makefile to use this.
 
 ln (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the ln program.  After Configure runs,
        the value is reset to a plain "ln" and is not useful.
 
        full pathname (if any) of the ln program.  After Configure runs,
        the value is reset to a plain "ln" and is not useful.
 


@@ -2305,7 +2262,7 @@ lpr (Loc.U):
        The value is a plain '' and is not useful.
 
 ls (Loc.U):
        The value is a plain '' and is not useful.
 
 ls (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the ls program.  After Configure runs,
        the value is reset to a plain "ls" and is not useful.
 
        full pathname (if any) of the ls program.  After Configure runs,
        the value is reset to a plain "ls" and is not useful.
 


@@ -2328,7 +2285,7 @@ mailx (Loc.U):
        The value is a plain '' and is not useful.
 
 make (Loc.U):
        The value is a plain '' and is not useful.
 
 make (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the make program.  After Configure runs,
        the value is reset to a plain "make" and is not useful.
 
        full pathname (if any) of the make program.  After Configure runs,
        the value is reset to a plain "make" and is not useful.
 


@@ -2389,7 +2346,7 @@ man3ext (man3dir.U):
        See man3dir.
 
 Mcc (Loc.U):
        See man3dir.
 
 Mcc (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the Mcc program.  After Configure runs,
        the value is reset to a plain "Mcc" and is not useful.
 
        full pathname (if any) of the Mcc program.  After Configure runs,
        the value is reset to a plain "Mcc" and is not useful.
 


@@ -2404,7 +2361,7 @@ mips_type (usrinc.U):
        Possible values are "BSD 4.3" and "System V".
 
 mkdir (Loc.U):
        Possible values are "BSD 4.3" and "System V".
 
 mkdir (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the mkdir program.  After Configure runs,
        the value is reset to a plain "mkdir" and is not useful.
 
        full pathname (if any) of the mkdir program.  After Configure runs,
        the value is reset to a plain "mkdir" and is not useful.
 


@@ -2424,7 +2381,7 @@ modetype (modetype.U):
        modes for system calls.
 
 more (Loc.U):
        modes for system calls.
 
 more (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the more program.  After Configure runs,
        the value is reset to a plain "more" and is not useful.
 
        full pathname (if any) of the more program.  After Configure runs,
        the value is reset to a plain "more" and is not useful.
 


@@ -2486,7 +2443,7 @@ netdb_net_type (netdbtype.U):
        This is only useful if you have getnetbyaddr(), naturally.
 
 nm (Loc.U):
        This is only useful if you have getnetbyaddr(), naturally.
 
 nm (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the nm program.  After Configure runs,
        the value is reset to a plain "nm" and is not useful.
 
        full pathname (if any) of the nm program.  After Configure runs,
        the value is reset to a plain "nm" and is not useful.
 


@@ -2506,7 +2463,7 @@ nonxs_ext (Extensions.U):
        in the package.  All of them will be built.
 
 nroff (Loc.U):
        in the package.  All of them will be built.
 
 nroff (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the nroff program.  After Configure runs,
        the value is reset to a plain "nroff" and is not useful.
 
        full pathname (if any) of the nroff program.  After Configure runs,
        the value is reset to a plain "nroff" and is not useful.
 


@@ -2584,7 +2541,7 @@ perlpath (perlpath.U):
        shell scripts and in the "eval 'exec'" idiom.
 
 pg (Loc.U):
        shell scripts and in the "eval 'exec'" idiom.
 
 pg (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the pg program.  After Configure runs,
        the value is reset to a plain "pg" and is not useful.
 
        full pathname (if any) of the pg program.  After Configure runs,
        the value is reset to a plain "pg" and is not useful.
 


@@ -2665,7 +2622,7 @@ rd_nodata (nblock_io.U):
        no data and an EOF.. Sigh!
 
 rm (Loc.U):
        no data and an EOF.. Sigh!
 
 rm (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the rm program.  After Configure runs,
        the value is reset to a plain "rm" and is not useful.
 
        full pathname (if any) of the rm program.  After Configure runs,
        the value is reset to a plain "rm" and is not useful.
 


@@ -2694,7 +2651,7 @@ scriptdirexp (scriptdir.U):
        at configuration time, for programs not wanting to bother with it.
 
 sed (Loc.U):
        at configuration time, for programs not wanting to bother with it.
 
 sed (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the sed program.  After Configure runs,
        the value is reset to a plain "sed" and is not useful.
 
        full pathname (if any) of the sed program.  After Configure runs,
        the value is reset to a plain "sed" and is not useful.
 


@@ -2854,7 +2811,7 @@ socketlib (d_socket.U):
        This variable has the names of any libraries needed for socket support.
 
 sort (Loc.U):
        This variable has the names of any libraries needed for socket support.
 
 sort (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the sort program.  After Configure runs,
        the value is reset to a plain "sort" and is not useful.
 
        full pathname (if any) of the sort program.  After Configure runs,
        the value is reset to a plain "sort" and is not useful.
 


@@ -2873,6 +2830,54 @@ split (models.U):
        machines that support separation of instruction and data space.  It is
        up to the Makefile to use this.
 
        machines that support separation of instruction and data space.  It is
        up to the Makefile to use this.
 

+sPRId64 (quadfio.U):
+       This variable, if defined, contains the string used by stdio to
+       format 64-bit decimal numbers (format 'd') for output.
+
+sPRIeldbl (longdblfio.U):
+       This variable, if defined, contains the string used by stdio to
+       format long doubles (format 'e') for output.
+
+sPRIEldbl (longdblfio.U):
+       This variable, if defined, contains the string used by stdio to
+       format long doubles (format 'E') for output.
+
+sPRIfldbl (longdblfio.U):
+       This variable, if defined, contains the string used by stdio to
+       format long doubles (format 'f') for output.
+
+sPRIFldbl (longdblfio.U):
+       This variable, if defined, contains the string used by stdio to
+       format long doubles (format 'F') for output.
+
+sPRIgldbl (longdblfio.U):
+       This variable, if defined, contains the string used by stdio to
+       format long doubles (format 'g') for output.
+
+sPRIGldbl (longdblfio.U):
+       This variable, if defined, contains the string used by stdio to
+       format long doubles (format 'G') for output.
+
+sPRIi64 (quadfio.U):
+       This variable, if defined, contains the string used by stdio to
+       format 64-bit decimal numbers (format 'i') for output.
+
+sPRIo64 (quadfio.U):
+       This variable, if defined, contains the string used by stdio to
+       format 64-bit octal numbers (format 'o') for output.
+
+sPRIu64 (quadfio.U):
+       This variable, if defined, contains the string used by stdio to
+       format 64-bit unsigned decimal numbers (format 'u') for output.
+
+sPRIx64 (quadfio.U):
+       This variable, if defined, contains the string used by stdio to
+       format 64-bit hexadecimal numbers (format 'x') for output.
+
+sPRIX64 (quadfio.U):
+       This variable, if defined, contains the string used by stdio to
+       format 64-bit hExADECimAl numbers (format 'X') for output.
+

 src (src.U):
        This variable holds the path to the package source. It is up to
        the Makefile to use this variable and set VPATH accordingly to
 src (src.U):
        This variable holds the path to the package source. It is up to
        the Makefile to use this variable and set VPATH accordingly to


@@ -2973,7 +2978,7 @@ tee (Loc.U):
        The value is a plain '' and is not useful.
 
 test (Loc.U):
        The value is a plain '' and is not useful.
 
 test (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the test program.  After Configure runs,
        the value is reset to a plain "test" and is not useful.
 
        full pathname (if any) of the test program.  After Configure runs,
        the value is reset to a plain "test" and is not useful.
 


@@ -2986,12 +2991,12 @@ timetype (d_time.U):
        included). Anyway, the type Time_t should be used.
 
 touch (Loc.U):
        included). Anyway, the type Time_t should be used.
 
 touch (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the touch program.  After Configure runs,
        the value is reset to a plain "touch" and is not useful.
 
 tr (Loc.U):
        full pathname (if any) of the touch program.  After Configure runs,
        the value is reset to a plain "touch" and is not useful.
 
 tr (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the tr program.  After Configure runs,
        the value is reset to a plain "tr" and is not useful.
 
        full pathname (if any) of the tr program.  After Configure runs,
        the value is reset to a plain "tr" and is not useful.
 


@@ -3010,12 +3015,12 @@ uidtype (uidtype.U):
        ushort, or whatever type is used to declare user ids in the kernel.
 
 uname (Loc.U):
        ushort, or whatever type is used to declare user ids in the kernel.
 
 uname (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the uname program.  After Configure runs,
        the value is reset to a plain "uname" and is not useful.
 
 uniq (Loc.U):
        full pathname (if any) of the uname program.  After Configure runs,
        the value is reset to a plain "uname" and is not useful.
 
 uniq (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the uniq program.  After Configure runs,
        the value is reset to a plain "uniq" and is not useful.
 
        full pathname (if any) of the uniq program.  After Configure runs,
        the value is reset to a plain "uniq" and is not useful.
 


@@ -3028,6 +3033,20 @@ usedl (dlsrc.U):
        This variable indicates if the the system supports dynamic
        loading of some sort.  See also dlsrc and dlobj.
 
        This variable indicates if the the system supports dynamic
        loading of some sort.  See also dlsrc and dlobj.
 

+uselargefiles (uselfs.U):
+       This variable conditionally defines the USE_LARGE_FILES symbol,
+       and indicates that large file interfaces should be used when
+       available.  The use64bits symbol will also be turned on if necessary.
+
+uselongdouble (uselongdbl.U):
+       This variable conditionally defines the USE_LONG_DOUBLE symbol,
+       and indicates that long doubles should be used when available.
+
+usemorebits (usemorebits.U):
+       This variable conditionally defines the USE_MORE_BITS symbol,
+       and indicates that explicit 64-bit interfaces and long doubles
+       should be used when available.
+

 usemultiplicity (usemultiplicity.U):
        This variable conditionally defines the MULTIPLICITY symbol,
        and indicates that Perl should be built to use multiplicity.
 usemultiplicity (usemultiplicity.U):
        This variable conditionally defines the MULTIPLICITY symbol,
        and indicates that Perl should be built to use multiplicity.


@@ -3081,6 +3100,10 @@ usethreads (usethreads.U):
        This variable conditionally defines the USE_THREADS symbol,
        and indicates that Perl should be built to use threads.
 
        This variable conditionally defines the USE_THREADS symbol,
        and indicates that Perl should be built to use threads.
 

+usevendorprefix (vendorprefix.U):
+       This variable tells whether the vendorprefix
+       and consequently other vendor* paths are in use.
+

 usevfork (d_vfork.U):
        This variable is set to true when the user accepts to use vfork.
        It is set to false when no vfork is available or when the user
 usevfork (d_vfork.U):
        This variable is set to true when the user accepts to use vfork.
        It is set to false when no vfork is available or when the user


@@ -3140,7 +3163,7 @@ zcat (Loc.U):
        The value is a plain '' and is not useful.
 
 zip (Loc.U):
        The value is a plain '' and is not useful.
 
 zip (Loc.U):

-       This variable is be used internally by Configure to determine the
+       This variable is used internally by Configure to determine the

        full pathname (if any) of the zip program.  After Configure runs,
        the value is reset to a plain "zip" and is not useful.
 
        full pathname (if any) of the zip program.  After Configure runs,
        the value is reset to a plain "zip" and is not useful.