+if ($^O eq 'os2') {
+ print CONFIG <<'ENDOFSET';
+my %preconfig;
+if ($OS2::is_aout) {
+ my ($value, $v) = $Config_SH =~ m/^used_aout='(.*)'\s*$/m;
+ for (split ' ', $value) {
+ ($v) = $Config_SH =~ m/^aout_$_='(.*)'\s*$/m;
+ $preconfig{$_} = $v eq 'undef' ? undef : $v;
+ }
+}
+$preconfig{d_fork} = undef unless $OS2::can_fork; # Some funny cases can't
+sub TIEHASH { bless {%preconfig} }
+ENDOFSET
+ # Extract the name of the DLL from the makefile to avoid duplication
+ my ($f) = grep -r, qw(GNUMakefile Makefile);
+ my $dll;
+ if (open my $fh, '<', $f) {
+ while (<$fh>) {
+ $dll = $1, last if /^PERL_DLL_BASE\s*=\s*(\S*)\s*$/;
+ }
+ }
+ print CONFIG <<ENDOFSET if $dll;
+\$preconfig{dll_name} = '$dll';
+ENDOFSET
+} else {
+ print CONFIG <<'ENDOFSET';
+sub TIEHASH {
+ bless $_[1], $_[0];
+}
+ENDOFSET
+}
+
+
+# Calculation for the keys for byteorder
+# This is somewhat grim, but I need to run fetch_string here.
+our $Config_SH = join "\n", @v_fast, @v_others;
+
+my $t = fetch_string ({}, 'ivtype');
+my $s = fetch_string ({}, 'ivsize');
+
+# byteorder does exist on its own but we overlay a virtual
+# dynamically recomputed value.
+
+# However, ivtype and ivsize will not vary for sane fat binaries
+
+my $f = $t eq 'long' ? 'L!' : $s == 8 ? 'Q': 'I';
+
+my $byteorder_code;
+if ($s == 4 || $s == 8) {
+ my $list = join ',', reverse(2..$s);
+ my $format = 'a'x$s;
+ $byteorder_code = <<"EOT";
+my \$i = 0;
+foreach my \$c ($list) { \$i |= ord(\$c); \$i <<= 8 }
+\$i |= ord(1);
+my \$value = join('', unpack('$format', pack('$f', \$i)));
+EOT
+} else {
+ $byteorder_code = "\$value = '?'x$s;\n";
+}
+
+my $fast_config = join '', map { " $_,\n" }
+ sort values (%v_fast), 'byteorder => $value' ;
+
+print CONFIG sprintf <<'ENDOFTIE', $byteorder_code, $fast_config;
+
+# avoid Config..Exporter..UNIVERSAL search for DESTROY then AUTOLOAD
+sub DESTROY { }
+
+%s
+
+tie %%Config, 'Config', {
+%s
+};
+
+1;
+ENDOFTIE
+
+
+open(CONFIG_POD, ">lib/Config.pod") or die "Can't open lib/Config.pod: $!";
+print CONFIG_POD <<'ENDOFTAIL';
+=head1 NAME
+
+Config - access Perl configuration information
+
+=head1 SYNOPSIS
+
+ use Config;
+ if ($Config{'cc'} =~ /gcc/) {
+ print "built by gcc\n";
+ }
+
+ use Config qw(myconfig config_sh config_vars config_re);
+
+ print myconfig();
+
+ print config_sh();
+
+ print config_re();
+
+ config_vars(qw(osname archname));
+
+
+=head1 DESCRIPTION
+
+The Config module contains all the information that was available to
+the C<Configure> program at Perl build time (over 900 values).
+
+Shell variables from the F<config.sh> file (written by Configure) are
+stored in the readonly-variable C<%Config>, indexed by their names.
+
+Values stored in config.sh as 'undef' are returned as undefined
+values. The perl C<exists> function can be used to check if a
+named variable exists.
+
+=over 4
+
+=item myconfig()
+
+Returns a textual summary of the major perl configuration values.
+See also C<-V> in L<perlrun/Switches>.
+
+=item config_sh()
+
+Returns the entire perl configuration information in the form of the
+original config.sh shell variable assignment script.
+
+=item config_re($regex)
+
+Like config_sh() but returns, as a list, only the config entries who's
+names match the $regex.
+
+=item config_vars(@names)
+
+Prints to STDOUT the values of the named configuration variable. Each is
+printed on a separate line in the form:
+
+ name='value';
+
+Names which are unknown are output as C<name='UNKNOWN';>.
+See also C<-V:name> in L<perlrun/Switches>.
+
+=back
+
+=head1 EXAMPLE
+
+Here's a more sophisticated example of using %Config:
+
+ use Config;
+ use strict;
+
+ my %sig_num;
+ my @sig_name;
+ unless($Config{sig_name} && $Config{sig_num}) {
+ die "No sigs?";
+ } else {
+ my @names = split ' ', $Config{sig_name};
+ @sig_num{@names} = split ' ', $Config{sig_num};
+ foreach (@names) {
+ $sig_name[$sig_num{$_}] ||= $_;
+ }
+ }
+
+ print "signal #17 = $sig_name[17]\n";
+ if ($sig_num{ALRM}) {
+ print "SIGALRM is $sig_num{ALRM}\n";
+ }
+
+=head1 WARNING
+
+Because this information is not stored within the perl executable
+itself it is possible (but unlikely) that the information does not
+relate to the actual perl binary which is being used to access it.
+
+The Config module is installed into the architecture and version
+specific library directory ($Config{installarchlib}) and it checks the
+perl version number when loaded.
+
+The values stored in config.sh may be either single-quoted or
+double-quoted. Double-quoted strings are handy for those cases where you
+need to include escape sequences in the strings. To avoid runtime variable
+interpolation, any C<$> and C<@> characters are replaced by C<\$> and
+C<\@>, respectively. This isn't foolproof, of course, so don't embed C<\$>
+or C<\@> in double-quoted strings unless you're willing to deal with the
+consequences. (The slashes will end up escaped and the C<$> or C<@> will
+trigger variable interpolation)
+
+=head1 GLOSSARY
+
+Most C<Config> variables are determined by the C<Configure> script
+on platforms supported by it (which is most UNIX platforms). Some
+platforms have custom-made C<Config> variables, and may thus not have
+some of the variables described below, or may have extraneous variables
+specific to that particular port. See the port specific documentation
+in such cases.
+
+ENDOFTAIL
+
+if ($Opts{glossary}) {
+ open(GLOS, "<$Glossary") or die "Can't open $Glossary: $!";
+}
+%seen = ();
+$text = 0;
+$/ = '';
+
+sub process {
+ if (s/\A(\w*)\s+\(([\w.]+)\):\s*\n(\t?)/=item C<$1>\n\nFrom F<$2>:\n\n/m) {
+ my $c = substr $1, 0, 1;
+ unless ($seen{$c}++) {
+ print CONFIG_POD <<EOF if $text;
+=back
+
+EOF
+ print CONFIG_POD <<EOF;
+=head2 $c
+
+=over 4
+
+EOF
+ $text = 1;
+ }
+ }
+ elsif (!$text || !/\A\t/) {
+ warn "Expected a Configure variable header",
+ ($text ? " or another paragraph of description" : () );
+ }
+ s/n't/n\00t/g; # leave can't, won't etc untouched
+ s/^\t\s+(.*)/\n$1/gm; # Indented lines ===> new paragraph
+ s/^(?<!\n\n)\t(.*)/$1/gm; # Not indented lines ===> text
+ s{([\'\"])(?=[^\'\"\s]*[./][^\'\"\s]*\1)([^\'\"\s]+)\1}(F<$2>)g; # '.o'
+ s{([\'\"])([^\'\"\s]+)\1}(C<$2>)g; # "date" command
+ s{\'([A-Za-z_\- *=/]+)\'}(C<$1>)g; # 'ln -s'
+ s{
+ (?<! [\w./<\'\"] ) # Only standalone file names
+ (?! e \. g \. ) # Not e.g.
+ (?! \. \. \. ) # Not ...
+ (?! \d ) # Not 5.004
+ (?! read/ ) # Not read/write
+ (?! etc\. ) # Not etc.
+ (?! I/O ) # Not I/O
+ (
+ \$ ? # Allow leading $
+ [\w./]* [./] [\w./]* # Require . or / inside
+ )
+ (?<! \. (?= [\s)] ) ) # Do not include trailing dot
+ (?! [\w/] ) # Include all of it
+ }
+ (F<$1>)xg; # /usr/local
+ s/((?<=\s)~\w*)/F<$1>/g; # ~name
+ s/(?<![.<\'\"])\b([A-Z_]{2,})\b(?![\'\"])/C<$1>/g; # UNISTD
+ s/(?<![.<\'\"])\b(?!the\b)(\w+)\s+macro\b/C<$1> macro/g; # FILE_cnt macro
+ s/n[\0]t/n't/g; # undo can't, won't damage
+}
+
+if ($Opts{glossary}) {
+ <GLOS>; # Skip the "DO NOT EDIT"
+ <GLOS>; # Skip the preamble
+ while (<GLOS>) {
+ process;
+ print CONFIG_POD;
+ }
+}
+
+print CONFIG_POD <<'ENDOFTAIL';
+
+=back
+
+=head1 NOTE
+
+This module contains a good example of how to use tie to implement a
+cache and an example of how to make a tied variable readonly to those
+outside of it.
+
+=cut
+
+ENDOFTAIL
+