}
/*
+=for apidoc bytes_cmp_utf8
+
+Compares the sequence of characters (stored as octets) in b, blen with the
+sequence of characters (stored as UTF-8) in u, ulen. Returns 0 if they are
+equal, -1 or -2 if the first string is less than the second string, +1 or +2
+if the first string is greater than the second string.
+
+-1 or +1 is returned if the shorter string was identical to the start of the
+longer string. -2 or +2 is returned if the was a difference between characters
+within the strings.
+
+=cut
+*/
+
+int
+Perl_bytes_cmp_utf8(pTHX_ const U8 *b, STRLEN blen, const U8 *u, STRLEN ulen)
+{
+ const U8 *const bend = b + blen;
+ const U8 *const uend = u + ulen;
+
+ PERL_ARGS_ASSERT_BYTES_CMP_UTF8;
+
+ PERL_UNUSED_CONTEXT;
+
+ while (b < bend && u < uend) {
+ U8 c = *u++;
+ if (!UTF8_IS_INVARIANT(c)) {
+ if (UTF8_IS_DOWNGRADEABLE_START(c)) {
+ if (u < uend) {
+ U8 c1 = *u++;
+ if (UTF8_IS_CONTINUATION(c1)) {
+ c = UTF8_ACCUMULATE(NATIVE_TO_UTF(c), c1);
+ c = ASCII_TO_NATIVE(c);
+ } else {
+ Perl_ck_warner_d(aTHX_ packWARN(WARN_UTF8),
+ "Malformed UTF-8 character "
+ "(unexpected non-continuation byte 0x%02x"
+ ", immediately after start byte 0x%02x)"
+ /* Dear diag.t, it's in the pod. */
+ "%s%s", c1, c,
+ PL_op ? " in " : "",
+ PL_op ? OP_DESC(PL_op) : "");
+ return -2;
+ }
+ } else {
+ if (PL_op)
+ Perl_ck_warner_d(aTHX_ packWARN(WARN_UTF8),
+ "%s in %s", unees, OP_DESC(PL_op));
+ else
+ Perl_ck_warner_d(aTHX_ packWARN(WARN_UTF8), unees);
+ return -2; /* Really want to return undef :-) */
+ }
+ } else {
+ return -2;
+ }
+ }
+ if (*b != c) {
+ return *b < c ? -2 : +2;
+ }
+ ++b;
+ }
+
+ if (b == bend && u == uend)
+ return 0;
+
+ return b < bend ? +1 : -1;
+}
+
+/*
=for apidoc utf8_to_bytes
Converts a string C<s> of length C<len> from UTF-8 into native byte encoding.
NORETURN_FUNCTION_END;
}
+/* Read a single line of the main body of the swash input text. These are of
+ * the form:
+ * 0053 0056 0073
+ * where each number is hex. The first two numbers form the minimum and
+ * maximum of a range, and the third is the value associated with the range.
+ * Not all swashes should have a third number
+ *
+ * On input: l points to the beginning of the line to be examined; it points
+ * to somewhere in the string of the whole input text, and is
+ * terminated by a \n or the null string terminator.
+ * lend points to the null terminator of that string
+ * wants_value is non-zero if the swash expects a third number
+ * typestr is the name of the swash's mapping, like 'ToLower'
+ * On output: *min, *max, and *val are set to the values read from the line.
+ * returns a pointer just beyond the line examined. If there was no
+ * valid min number on the line, returns lend+1
+ */
+
+STATIC U8*
+S_swash_scan_list_line(pTHX_ U8* l, U8* const lend, UV* min, UV* max, UV* val,
+ const bool wants_value, const U8* const typestr)
+{
+ const int typeto = typestr[0] == 'T' && typestr[1] == 'o';
+ STRLEN numlen; /* Length of the number */
+ I32 flags = PERL_SCAN_SILENT_ILLDIGIT | PERL_SCAN_DISALLOW_PREFIX;
+
+ /* nl points to the next \n in the scan */
+ U8* const nl = (U8*)memchr(l, '\n', lend - l);
+
+ /* Get the first number on the line: the range minimum */
+ numlen = lend - l;
+ *min = grok_hex((char *)l, &numlen, &flags, NULL);
+ if (numlen) /* If found a hex number, position past it */
+ l += numlen;
+ else if (nl) { /* Else, go handle next line, if any */
+ return nl + 1; /* 1 is length of "\n" */
+ }
+ else { /* Else, no next line */
+ return lend + 1; /* to LIST's end at which \n is not found */
+ }
+
+ /* The max range value follows, separated by a BLANK */
+ if (isBLANK(*l)) {
+ ++l;
+ flags = PERL_SCAN_SILENT_ILLDIGIT | PERL_SCAN_DISALLOW_PREFIX;
+ numlen = lend - l;
+ *max = grok_hex((char *)l, &numlen, &flags, NULL);
+ if (numlen)
+ l += numlen;
+ else /* If no value here, it is a single element range */
+ *max = *min;
+
+ /* Non-binary tables have a third entry: what the first element of the
+ * range maps to */
+ if (wants_value) {
+ if (isBLANK(*l)) {
+ ++l;
+ flags = PERL_SCAN_SILENT_ILLDIGIT |
+ PERL_SCAN_DISALLOW_PREFIX;
+ numlen = lend - l;
+ *val = grok_hex((char *)l, &numlen, &flags, NULL);
+ if (numlen)
+ l += numlen;
+ else
+ *val = 0;
+ }
+ else {
+ *val = 0;
+ if (typeto) {
+ Perl_croak(aTHX_ "%s: illegal mapping '%s'",
+ typestr, l);
+ }
+ }
+ }
+ else
+ *val = 0; /* bits == 1, then any val should be ignored */
+ }
+ else { /* Nothing following range min, should be single element with no
+ mapping expected */
+ *max = *min;
+ if (wants_value) {
+ *val = 0;
+ if (typeto) {
+ Perl_croak(aTHX_ "%s: illegal mapping '%s'", typestr, l);
+ }
+ }
+ else
+ *val = 0; /* bits == 1, then val should be ignored */
+ }
+
+ /* Position to next line if any, or EOF */
+ if (nl)
+ l = nl + 1;
+ else
+ l = lend;
+
+ return l;
+}
+
/* Note:
* Returns a swatch (a bit vector string) for a code point sequence
* that starts from the value C<start> and comprises the number C<span>.
SV** const nonesvp = hv_fetchs(hv, "NONE", FALSE);
SV** const extssvp = hv_fetchs(hv, "EXTRAS", FALSE);
const U8* const typestr = (U8*)SvPV_nolen(*typesvp);
- const int typeto = typestr[0] == 'T' && typestr[1] == 'o';
const STRLEN bits = SvUV(*bitssvp);
const STRLEN octets = bits >> 3; /* if bits == 1, then octets == 0 */
const UV none = SvUV(*nonesvp);
lend = l + lcur;
while (l < lend) {
UV min, max, val;
- STRLEN numlen; /* Length of the number */
- I32 flags = PERL_SCAN_SILENT_ILLDIGIT | PERL_SCAN_DISALLOW_PREFIX;
-
- /* nl points to the next \n in the scan */
- U8* const nl = (U8*)memchr(l, '\n', lend - l);
-
- /* Get the first number on the line: the range minimum */
- numlen = lend - l;
- min = grok_hex((char *)l, &numlen, &flags, NULL);
- if (numlen) /* If found a hex number, position past it */
- l += numlen;
- else if (nl) { /* Else, go handle next line, if any */
- l = nl + 1; /* 1 is length of "\n" */
- continue;
- }
- else { /* Else, no next line */
- l = lend; /* to LIST's end at which \n is not found */
+ l = S_swash_scan_list_line(aTHX_ l, lend, &min, &max, &val,
+ cBOOL(octets), typestr);
+ if (l > lend) {
break;
}
- /* The max range value follows, separated by a BLANK */
- if (isBLANK(*l)) {
- ++l;
- flags = PERL_SCAN_SILENT_ILLDIGIT | PERL_SCAN_DISALLOW_PREFIX;
- numlen = lend - l;
- max = grok_hex((char *)l, &numlen, &flags, NULL);
- if (numlen)
- l += numlen;
- else /* If no value here, it is a single element range */
- max = min;
-
- /* Non-binary tables have a third entry: what the range maps to */
- if (octets) {
- if (isBLANK(*l)) {
- ++l;
- flags = PERL_SCAN_SILENT_ILLDIGIT |
- PERL_SCAN_DISALLOW_PREFIX;
- numlen = lend - l;
- val = grok_hex((char *)l, &numlen, &flags, NULL);
- if (numlen)
- l += numlen;
- else
- val = 0;
- }
- else {
- val = 0;
- if (typeto) {
- Perl_croak(aTHX_ "%s: illegal mapping '%s'",
- typestr, l);
- }
- }
- }
- else
- val = 0; /* bits == 1, then any val should be ignored */
- }
- else { /* Nothing following range min, should be single element with no
- mapping expected */
- max = min;
- if (octets) {
- val = 0;
- if (typeto) {
- Perl_croak(aTHX_ "%s: illegal mapping '%s'", typestr, l);
- }
- }
- else
- val = 0; /* bits == 1, then val should be ignored */
- }
-
- /* Position to next line if any, or EOF */
- if (nl)
- l = nl + 1;
- else
- l = lend;
-
/* If looking for something beyond this range, go try the next one */
if (max < start)
continue;
return swatch;
}
+HV*
+Perl__swash_inversion_hash(pTHX_ SV* swash)
+{
+
+ /* Subject to change or removal. For use only in one place in regexec.c
+ *
+ * Returns a hash which is the inversion and closure of a swash mapping.
+ * For example, consider the input lines:
+ * 004B 006B
+ * 004C 006C
+ * 212A 006B
+ *
+ * The returned hash would have two keys, the utf8 for 006B and the utf8 for
+ * 006C. The value for each key is an array. For 006C, the array would
+ * have a two elements, the utf8 for itself, and for 004C. For 006B, there
+ * would be three elements in its array, the utf8 for 006B, 004B and 212A.
+ *
+ * Essentially, for any code point, it gives all the code points that map to
+ * it, or the list of 'froms' for that point.
+ *
+ * Currently it only looks at the main body of the swash, and ignores any
+ * additions or deletions from other swashes */
+
+ U8 *l, *lend;
+ STRLEN lcur;
+ HV *const hv = MUTABLE_HV(SvRV(swash));
+
+ /* The string containing the main body of the table */
+ SV** const listsvp = hv_fetchs(hv, "LIST", FALSE);
+
+ SV** const typesvp = hv_fetchs(hv, "TYPE", FALSE);
+ SV** const bitssvp = hv_fetchs(hv, "BITS", FALSE);
+ SV** const nonesvp = hv_fetchs(hv, "NONE", FALSE);
+ /*SV** const extssvp = hv_fetchs(hv, "EXTRAS", FALSE);*/
+ const U8* const typestr = (U8*)SvPV_nolen(*typesvp);
+ const STRLEN bits = SvUV(*bitssvp);
+ const STRLEN octets = bits >> 3; /* if bits == 1, then octets == 0 */
+ const UV none = SvUV(*nonesvp);
+
+ HV* ret = newHV();
+
+ PERL_ARGS_ASSERT__SWASH_INVERSION_HASH;
+
+ /* Must have at least 8 bits to get the mappings */
+ if (bits != 8 && bits != 16 && bits != 32) {
+ Perl_croak(aTHX_ "panic: swash_inversion_hash doesn't expect bits %"UVuf,
+ (UV)bits);
+ }
+
+ /* read $swash->{LIST} */
+ l = (U8*)SvPV(*listsvp, lcur);
+ lend = l + lcur;
+
+ /* Go through each input line */
+ while (l < lend) {
+ UV min, max, val;
+ UV inverse;
+ l = S_swash_scan_list_line(aTHX_ l, lend, &min, &max, &val,
+ cBOOL(octets), typestr);
+ if (l > lend) {
+ break;
+ }
+
+ /* Each element in the range is to be inverted */
+ for (inverse = min; inverse <= max; inverse++) {
+ AV* list;
+ SV* element;
+ SV** listp;
+ IV i;
+ bool found_key = FALSE;
+
+ /* The key is the inverse mapping */
+ char key[UTF8_MAXBYTES+1];
+ char* key_end = (char *) uvuni_to_utf8((U8*) key, val);
+ STRLEN key_len = key_end - key;
+
+ /* And the value is what the forward mapping is from. */
+ char utf8_inverse[UTF8_MAXBYTES+1];
+ char *utf8_inverse_end = (char *) uvuni_to_utf8((U8*) utf8_inverse, inverse);
+
+ /* Get the list for the map */
+ if ((listp = hv_fetch(ret, key, key_len, FALSE))) {
+ list = (AV*) *listp;
+ }
+ else { /* No entry yet for it: create one */
+ list = newAV();
+ if (! hv_store(ret, key, key_len, (SV*) list, FALSE)) {
+ Perl_croak(aTHX_ "panic: hv_store() unexpectedly failed");
+ }
+ }
+
+ for (i = 0; i < av_len(list); i++) {
+ SV** entryp = av_fetch(list, i, FALSE);
+ SV* entry;
+ if (entryp == NULL) {
+ Perl_croak(aTHX_ "panic: av_fetch() unexpectedly failed");
+ }
+ entry = *entryp;
+ if (SvCUR(entry) != key_len) {
+ continue;
+ }
+ if (memEQ(key, SvPVX(entry), key_len)) {
+ found_key = TRUE;
+ break;
+ }
+ }
+ if (! found_key) {
+ element = newSVpvn_flags(key, key_len, SVf_UTF8);
+ av_push(list, element);
+ }
+
+
+ /* Simply add the value to the list */
+ element = newSVpvn_flags(utf8_inverse, utf8_inverse_end - utf8_inverse, SVf_UTF8);
+ av_push(list, element);
+
+ /* swash_get() increments the value of val for each element in the
+ * range. That makes more compact tables possible. You can
+ * express the capitalization, for example, of all consecutive
+ * letters with a single line: 0061\t007A\t0041 This maps 0061 to
+ * 0041, 0062 to 0042, etc. I (khw) have never understood 'none',
+ * and it's not documented, and perhaps not even currently used,
+ * but I copied the semantics from swash_get(), just in case */
+ if (!none || val < none) {
+ ++val;
+ }
+ }
+ }
+
+ return ret;
+}
+
/*
=for apidoc uvchr_to_utf8
https://perl5.git.perl.org / perl5.git / blobdiff