=head2 Using perl as shipped with HP-UX
-As of application release September 2001, HP-UX 11.00 is shipped with
-perl-5.6.1 in /opt/perl. The first occurrence is on CD 5012-7954 and
-can be installed using
+Application release September 2001, HP-UX 11.00 is the first to ship
+with Perl. By the time it was perl-5.6.1 in /opt/perl. The first
+occurrence is on CD 5012-7954 and can be installed using
- swinstall -s /cdrom perl
+ swinstall -s /cdrom perl
assuming you have mounted that CD on /cdrom. In this version the
-following modules are installed:
-
- ActivePerl::DocTools-0.04 HTML::Parser-3.19 XML::DOM-1.25
- Archive::Tar-0.072 HTML::Tagset-3.03 XML::Parser-2.27
- Compress::Zlib-1.08 MIME::Base64-2.11 XML::Simple-1.05
- Convert::ASN1-0.10 Net-1.07 XML::XPath-1.09
- Digest::MD5-2.11 PPM-2.1.5 XML::XSLT-0.32
- File::CounterFile-0.12 SOAP::Lite-0.46 libwww-perl-5.51
- Font::AFM-1.18 Storable-1.011 libxml-perl-0.07
- HTML-Tree-3.11 URI-1.11 perl-ldap-0.23
-
-The build is a portable hppa-1.1 multithread build that supports large
+following modules were installed:
+
+ ActivePerl::DocTools-0.04 HTML::Parser-3.19 XML::DOM-1.25
+ Archive::Tar-0.072 HTML::Tagset-3.03 XML::Parser-2.27
+ Compress::Zlib-1.08 MIME::Base64-2.11 XML::Simple-1.05
+ Convert::ASN1-0.10 Net-1.07 XML::XPath-1.09
+ Digest::MD5-2.11 PPM-2.1.5 XML::XSLT-0.32
+ File::CounterFile-0.12 SOAP::Lite-0.46 libwww-perl-5.51
+ Font::AFM-1.18 Storable-1.011 libxml-perl-0.07
+ HTML-Tree-3.11 URI-1.11 perl-ldap-0.23
+
+The build was a portable hppa-1.1 multithread build that supports large
files compiled with gcc-2.9-hppa-991112
If you perform a new installation, then Perl will be installed
automatically.
+More recent (preinstalled) HP-UX systems have more recent versions of
+Perl and the updated modules.
+
+=head2 Using perl from HP's porting centre
+
+HP porting centre tries very hard to keep up with customer demand and
+release updates from the Open Source community. Having precompiled
+Perl binaries available is obvious.
+
+The HP porting centres are limited in what systems they are allowed
+to port to and they usually choose the two most recent OS versions
+available. This means that at the moment of writing, there are only
+HP-UX 11.11 (pa-risc 2.0) and HP-UX 11.23 (Itanium 2) ports available
+on the porting centres.
+
+HP has asked the porting centre to move Open Source binaries
+from /opt to /usr/local, so binaries produced since the start
+of July 2002 are located in /usr/local.
+
+One of HP porting centres URL's is http://hpux.connect.org.uk/
+The port currently available is built with GNU gcc.
+
=head2 Compiling Perl 5 on HP-UX
When compiling Perl, you must use an ANSI C compiler. The C compiler
require the use of HP compiler-specific command-line flags.
If you decide to use gcc, make sure your installation is recent and
-complete, and be sure to read the Perl README file for more gcc-specific
+complete, and be sure to read the Perl INSTALL file for more gcc-specific
details.
=head2 PA-RISC
Motorola chipset.
The most recent version of PA-RISC at the time of this document's last
-update is 2.0.
+update is 2.0. HP PA-RISC systems are usually refered to with model
+description "HP 9000".
+
+A complete list of models at the time the OS was built is in the file
+/usr/sam/lib/mo/sched.models. The first column corresponds to the last
+part of the output of the "model" command. The second column is the
+PA-RISC version and the third column is the exact chip type used.
+(Start browsing at the bottom to prevent confusion ;-)
+
+ # model
+ 9000/800/L1000-44
+ # grep L1000-44 /usr/sam/lib/mo/sched.models
+ L1000-44 2.0 PA8500
+
+=head2 Portability Between PA-RISC Versions
+
+An executable compiled on a PA-RISC 2.0 platform will not execute on a
+PA-RISC 1.1 platform, even if they are running the same version of
+HP-UX. If you are building Perl on a PA-RISC 2.0 platform and want that
+Perl to also run on a PA-RISC 1.1, the compiler flags +DAportable and
++DS32 should be used.
+
+It is no longer possible to compile PA-RISC 1.0 executables on either
+the PA-RISC 1.1 or 2.0 platforms. The command-line flags are accepted,
+but the resulting executable will not run when transferred to a PA-RISC
+1.0 system.
=head2 PA-RISC 1.0
The following systems contained PA-RISC 1.0 chips:
- 600, 635, 645, 808, 815, 822, 825, 832, 834, 835, 840, 842, 845, 850,
- 852, 855, 860, 865, 870, 890
+ 600, 635, 645, 808, 815, 822, 825, 832, 834, 835, 840, 842, 845, 850,
+ 852, 855, 860, 865, 870, 890
=head2 PA-RISC 1.1
The following systems contain with PA-RISC 1.1 chips:
- 705, 710, 712, 715, 720, 722, 725, 728, 730, 735, 742, 743, 744, 745,
- 747, 750, 755, 770, 777, 778, 779, 800, 801, 803, 806, 807, 809, 811,
- 813, 816, 817, 819, 821, 826, 827, 829, 831, 837, 839, 841, 847, 849,
- 851, 856, 857, 859, 867, 869, 877, 887, 891, 892, 897, A180, A180C,
- B115, B120, B132L, B132L+, B160L, B180L, C100, C110, C115, C120,
- C160L, D200, D210, D220, D230, D250, D260, D310, D320, D330, D350,
- D360, D410, DX0, DX5, DXO, E25, E35, E45, E55, F10, F20, F30, G30,
- G40, G50, G60, G70, H20, H30, H40, H50, H60, H70, I30, I40, I50, I60,
- I70, J200, J210, J210XC, K100, K200, K210, K220, K230, K400, K410,
- K420, S700i, S715, S744, S760, T500, T520
+ 705, 710, 712, 715, 720, 722, 725, 728, 730, 735, 742, 743, 744, 745,
+ 747, 750, 755, 770, 777, 778, 779, 800, 801, 803, 806, 807, 809, 811,
+ 813, 816, 817, 819, 821, 826, 827, 829, 831, 837, 839, 841, 847, 849,
+ 851, 856, 857, 859, 867, 869, 877, 887, 891, 892, 897, A180, A180C,
+ B115, B120, B132L, B132L+, B160L, B180L, C100, C110, C115, C120,
+ C160L, D200, D210, D220, D230, D250, D260, D310, D320, D330, D350,
+ D360, D410, DX0, DX5, DXO, E25, E35, E45, E55, F10, F20, F30, G30,
+ G40, G50, G60, G70, H20, H30, H40, H50, H60, H70, I30, I40, I50, I60,
+ I70, J200, J210, J210XC, K100, K200, K210, K220, K230, K400, K410,
+ K420, S700i, S715, S744, S760, T500, T520
=head2 PA-RISC 2.0
As of the date of this document's last update, the following systems
contain PA-RISC 2.0 chips:
- 700, 780, 781, 782, 783, 785, 802, 804, 810, 820, 861, 871, 879, 889,
- 893, 895, 896, 898, 899, A400, A500, B1000, B2000, C130, C140, C160,
- C180, C180+, C180-XP, C200+, C400+, C3000, C360, C3600, CB260, D270,
- D280, D370, D380, D390, D650, J220, J2240, J280, J282, J400, J410,
- J5000, J5500XM, J5600, J7000, J7600, K250, K260, K260-EG, K270, K360,
- K370, K380, K450, K460, K460-EG, K460-XP, K470, K570, K580, L1000,
- L2000, L3000, N4000, R380, R390, RP2400, RP2430, RP2450, RP2470,
- RP5400, RP5430, RP5450, RP5470, RP7400, RP7410, RP8400, SD16000,
- SD32000, SD64000, T540, T600, V2000, V2200, V2250, V2500, V2600
-
-=head2 Itanium
-
-HP also ships servers with the 128-bit Itanium processor(s). As of the
-date of this document's last update, the following systems contain
-Itanium chips (this is very likely to be out of date):
-
- RX2600, RX4610, RX5670, RX9610
-
-A complete list of models at the time the OS was built is in the file
-/opt/langtools/lib/sched.models. The first column corresponds to the
-output of the "uname -m" command (without the leading "9000/"). The
-second column is the PA-RISC version and the third column is the exact
-chip type used. (Start browsing at the bottom to prevent confusion ;-)
-
-=head2 Portability Between PA-RISC Versions
-
-An executable compiled on a PA-RISC 2.0 platform will not execute on a
-PA-RISC 1.1 platform, even if they are running the same version of
-HP-UX. If you are building Perl on a PA-RISC 2.0 platform and want that
-Perl to also run on a PA-RISC 1.1, the compiler flags +DAportable and
-+DS32 should be used.
-
-It is no longer possible to compile PA-RISC 1.0 executables on either
-the PA-RISC 1.1 or 2.0 platforms. The command-line flags are accepted,
-but the resulting executable will not run when transferred to a PA-RISC
-1.0 system.
+ 700, 780, 781, 782, 783, 785, 802, 804, 810, 820, 861, 871, 879, 889,
+ 893, 895, 896, 898, 899, A400, A500, B1000, B2000, C130, C140, C160,
+ C180, C180+, C180-XP, C200+, C400+, C3000, C360, C3600, CB260, D270,
+ D280, D370, D380, D390, D650, J220, J2240, J280, J282, J400, J410,
+ J5000, J5500XM, J5600, J7000, J7600, K250, K260, K260-EG, K270, K360,
+ K370, K380, K450, K460, K460-EG, K460-XP, K470, K570, K580, L1000,
+ L2000, L3000, N4000, R380, R390, SD16000, SD32000, SD64000, T540,
+ T600, V2000, V2200, V2250, V2500, V2600
+
+Just before HP took over Compaq, some systems were renamed. the link
+that contained the explanation is dead, so here's a short summary:
+
+ HP 9000 A-Class servers, now renamed HP Server rp2400 series.
+ HP 9000 L-Class servers, now renamed HP Server rp5400 series.
+ HP 9000 N-Class servers, now renamed HP Server rp7400.
+
+ rp2400, rp2405, rp2430, rp2450, rp2470, rp3410, rp3440, rp4410,
+ rp4440, rp5400, rp5405, rp5430, rp5450, rp5470, rp7400, rp7405,
+ rp7410, rp7420, rp8400, rp8420, Superdome
+
+The current naming convention is:
+
+ aadddd
+ ||||`+- 00 - 99 relative capacity & newness (upgrades, etc.)
+ |||`--- unique number for each architecture to ensure different
+ ||| systems do not have the same numbering across
+ ||| architectures
+ ||`---- 1 - 9 identifies family and/or relative positioning
+ ||
+ |`----- c = ia32 (cisc)
+ | p = pa-risc
+ | x = ia-64 (Itanium & Itanium 2)
+ | h = housing
+ `------ t = tower
+ r = rack optimized
+ s = super scalable
+ b = blade
+ sa = appliance
=head2 Itanium Processor Family and HP-UX
HP-UX also runs on the new Itanium processor. This requires the use
-of a different version of HP-UX (currently 11.20), and with the exception
-of a few differences detailed below and in later sections, Perl should
-compile with no problems.
+of a different version of HP-UX (currently 11.23 or 11i v2), and with
+the exception of a few differences detailed below and in later sections,
+Perl should compile with no problems.
Although PA-RISC binaries can run on Itanium systems, you should not
attempt to use a PA-RISC version of Perl on an Itanium system. This is
because shared libraries created on an Itanium system cannot be loaded
while running a PA-RISC executable.
+HP Itanium 2 systems are usually refered to with model description
+"HP Integrity".
+
+=head2 Itanium & Itanium 2
+
+HP also ships servers with the 128-bit Itanium processor(s). As of the
+date of this document's last update, the following systems contain
+Itanium or Itanium 2 chips (this is very likely to be out of date):
+
+ rx1600, rx1620, rx2600, rx2600hptc, rx2620, rx4610, rx4640, rx5670,
+ rx7620, rx8620, rx9610
+
+To see all about your machine, type
+
+ # model
+ ia64 hp server rx2600
+ # /usr/contrib/bin/machinfo
+
=head2 Building Dynamic Extensions on HP-UX
HP-UX supports dynamically loadable libraries (shared libraries).
To create a shared library, the following steps must be performed:
- 1. Compile source modules with +z or +Z flag to create a .o module
- which contains Position-Independent Code (PIC). The linker will
- tell you in the next step if +Z was needed.
+ 1. Compile source modules with +z or +Z flag to create a .o module
+ which contains Position-Independent Code (PIC). The linker will
+ tell you in the next step if +Z was needed.
+ (For gcc, the appropriate flag is -fpic or -fPIC.)
- 2. Link the shared library using the -b flag. If the code calls
- any functions in other system libraries (e.g., libm), it must
- be included on this line.
+ 2. Link the shared library using the -b flag. If the code calls
+ any functions in other system libraries (e.g., libm), it must
+ be included on this line.
(Note that these steps are usually handled automatically by the extension's
Makefile).
HP is aware of this problem. Search the HP-UX cxx-dev forums for
discussions about the subject. The short answer is that B<everything>
(all libraries, everything) must be compiled with C<+z> or C<+Z> to be
-PIC (position independent code). In HP-UX 11.00 or newer the linker
+PIC (position independent code). (For gcc, that would be
+C<-fpic> or C<-fPIC>). In HP-UX 11.00 or newer the linker
error message should tell the name of the offending object file.
A more general approach is to intervene manually, as with an example for
the DB_File module, which requires SleepyCat's libdb.sl:
- # cd .../db-3.2.9/build_unix
- # vi Makefile
- ... add +Z to all cflags to create shared objects
- CFLAGS= -c $(CPPFLAGS) +Z -Ae +O2 +Onolimit \
- -I/usr/local/include -I/usr/include/X11R6
- CXXFLAGS= -c $(CPPFLAGS) +Z -Ae +O2 +Onolimit \
- -I/usr/local/include -I/usr/include/X11R6
-
- # make clean
- # make
- # mkdir tmp
- # cd tmp
- # ar x ../libdb.a
- # ld -b -o libdb-3.2.sl *.o
- # mv libdb-3.2.sl /usr/local/lib
- # rm *.o
- # cd /usr/local/lib
- # rm -f libdb.sl
- # ln -s libdb-3.2.sl libdb.sl
-
- # cd .../DB_File-1.76
- # make distclean
- # perl Makefile.PL
- # make
- # make test
- # make install
+ # cd .../db-3.2.9/build_unix
+ # vi Makefile
+ ... add +Z to all cflags to create shared objects
+ CFLAGS= -c $(CPPFLAGS) +Z -Ae +O2 +Onolimit \
+ -I/usr/local/include -I/usr/include/X11R6
+ CXXFLAGS= -c $(CPPFLAGS) +Z -Ae +O2 +Onolimit \
+ -I/usr/local/include -I/usr/include/X11R6
+
+ # make clean
+ # make
+ # mkdir tmp
+ # cd tmp
+ # ar x ../libdb.a
+ # ld -b -o libdb-3.2.sl *.o
+ # mv libdb-3.2.sl /usr/local/lib
+ # rm *.o
+ # cd /usr/local/lib
+ # rm -f libdb.sl
+ # ln -s libdb-3.2.sl libdb.sl
+
+ # cd .../DB_File-1.76
+ # make distclean
+ # perl Makefile.PL
+ # make
+ # make test
+ # make install
+
+As of db-4.2.x it is no longer needed to do this by hand. Sleepycat
+has changed the configuration process to add +z on HP-UX automatically.
+
+ # cd .../db-4.2.25/build_unix
+ # env CFLAGS=+DA2.0w LDFLAGS=+DA2.0w ../dist/configure
+
+should work to generate 64bit shared libraries for HP-UX 11.00 and 11i.
It is no longer possible to link PA-RISC 1.0 shared libraries (even
though the command-line flags are still present).
gcc yet, you can either build it yourself from the sources (available
from e.g. http://www.gnu.ai.mit.edu/software/gcc/releases.html) or fetch
a prebuilt binary from the HP porting center. There are two places where
-gcc prebuilds can be fetched the first and best (for HP-UX 11 only) is
+gcc prebuilds can be fetched; the first and best (for HP-UX 11 only) is
http://h21007.www2.hp.com/dspp/tech/tech_TechSoftwareDetailPage_IDX/1,1703,547,00.html
the second is http://hpux.cs.utah.edu/hppd/hpux/Gnu/ where you can also
find the GNU binutils package. (Browse through the list, because there
are often multiple versions of the same package available).
-Building a 64bit capable gcc from source is possible only when you have
-the HP C-ANSI C compiler available, which you should use anyway when
-building perl.
+Above mentioned distributions are depots. H.Merijn Brand has made prebuilt
+gcc binaries available on http://mirrors.develooper.com/hpux/ and/or
+http://www.cmve.net/~merijn/ for HP-UX 10.20, HP-UX 11.00, and HP-UX 11.11
+(HP-UX 11i) in both 32- and 64-bit versions. These are bzipped tar archives
+that also include recent GNU binutils and GNU gdb. Read the instructions
+on that page to rebuild gcc using itself.
+
+On PA-RISC you need a different compiler for 32-bit applications and for
+64-bit applications. On PA-RISC, 32-bit objects and 64-bit objects do
+not mix. period. There is no different behaviour for HP C-ANSI-C or GNU
+gcc. So if you require your perl binary to use 64-bit libraries, like
+Oracle-64bit, you MUST build a 64-bit perl.
+
+Building a 64-bit capable gcc on PA-RISC from source is possible only when
+you have the HP C-ANSI C compiler or an already working 64-bit binary of
+gcc available. Best performance for perl is achieved with HP's native
+compiler.
=head2 Using Large Files with Perl on HP-UX
compiled using structures and functions in which these are 64 bits wide,
rather than 32 bits wide. (Note that this will only work with HP's ANSI
C compiler. If you want to compile Perl using gcc, you will have to get
-a version of the compiler that support 64-bit operations. See above for
+a version of the compiler that supports 64-bit operations. See above for
where to find it.)
There are some drawbacks to this approach. One is that any extension
threads library package. Two examples are the HP DCE package, available
on "HP-UX Hardware Extensions 3.0, Install and Core OS, Release 10.20,
April 1999 (B3920-13941)" or the Freely available PTH package, available
-though worldwide HP-UX mirrors of precompiled packages
-(e.g. http://hpux.tn.tudelft.nl/hppd/hpux/)
+on H.Merijn's site (http://mirrors.develooper.com/hpux/).
If you are going to use the HP DCE package, the library used for threading
is /usr/lib/libcma.sl, but there have been multiple updates of that
Date: Apr 9 2001 10:01:06
d3:/usr/lib 107 >
+For building perl to support Oracle, it needs to be linked with libcl
+and libpthread. So even if your perl is an unthreaded build, these
+libraries might be required. See "Oracle on HP-UX" below.
=head2 64-bit Perl on HP-UX
versions of Unix. Once this is complete, scalar variables will be able
to hold numbers larger than 2^32 with complete precision.
-As of the date of this document, Perl is not 64-bit compliant on HP-UX.
+As of the date of this document, Perl is fully 64-bit compliant on
+HP-UX 11.00 and up for both cc- and gcc builds. If you are about to
+build a 64-bit perl with GNU gcc, please read the gcc section carefully.
Should a user wish to experiment with compiling Perl in the LP64
environment, use the -Duse64bitall flag to Configure. This will force
-Perl to be compiled in a pure LP64 environment (via the +DD64 flag).
+Perl to be compiled in a pure LP64 environment (with the +DD64 flag for
+HP C-ANSI-C, with no additional options for GNU gcc 64-bit on PA-RISC,
+and with -mlp64 for GNU gcc on Itanium).
+If you want to compile Perl using gcc, you will have to get a version of
+the compiler that supports 64-bit operations.)
You can also use the -Duse64bitint flag to Configure. Although there
are some minor differences between compiling Perl with this flag versus
configuration that cannot be compiled, or that does not function as
expected.
-(Note that these Configure flags will only work with HP's ANSI C
-compiler. If you want to compile Perl using gcc, you will have to get a
-version of the compiler that support 64-bit operations.)
-
=head2 Oracle on HP-UX
Using perl to connect to Oracle databases through DBI and DBD::Oracle
Do not forget the space before the trailing quote.
Also note that this does not (yet) work with all configurations,
-it is known to fail with 64bit versions of GCC.
+it is known to fail with 64-bit versions of GCC.
=head2 GDBM and Threads on HP-UX
=head2 perl -P and // and HP-UX
-In HP-UX Perl is compiled with flags that will cause problems if the
+If HP-UX Perl is compiled with flags that will cause problems if the
-P flag of Perl (preprocess Perl code with the C preprocessor before
perl sees it) is used. The problem is that C<//>, being a C++-style
until-end-of-line comment, will disappear along with the remainder
of the line. This means that common Perl constructs like
- s/foo//;
+ s/foo//;
will turn into illegal code
- s/foo
+ s/foo
The workaround is to use some other quoting separator than C<"/">,
like for example C<"!">:
- s!foo!!;
+ s!foo!!;
=head2 HP-UX Kernel Parameters (maxdsiz) for Compiling Perl
#0 0xc004216c in () from /usr/lib/libc.2
#1 0xc00d7550 in __nss_src_state_destr () from /usr/lib/libc.2
#2 0xc00d7768 in __nss_src_state_destr () from /usr/lib/libc.2
- #3 0xc00d78a8 in nss_delete () from /usr/lib/libc.2
- #4 0xc01126d8 in endpwent () from /usr/lib/libc.2
+ #3 0xc00d78a8 in nss_delete () from /usr/lib/libc.2
+ #4 0xc01126d8 in endpwent () from /usr/lib/libc.2
#5 0xd1950 in Perl_pp_epwent () from ./perl
#6 0x94d3c in Perl_runops_standard () from ./perl
#7 0x23728 in S_run_body () from ./perl
bug seems to be to create add to the file F</etc/nsswitch.conf>
(at least) the following lines
- group: files
+ group: files
passwd: files
Whether you are using NIS does not matter. Amazingly enough,
-the same bug affects also Solaris.
+the same bug also affects Solaris.
=head1 AUTHOR
Jeff Okamoto <okamoto@corp.hp.com>
-H.Merijn Brand <h.m.brand@hccnet.nl>
+H.Merijn Brand <h.m.brand@xs4all.nl>
With much assistance regarding shared libraries from Marc Sabatella.
=head1 DATE
-Version 0.6.6: 2002-05-30
+Version 0.7.4: 2005-06-02
=cut
https://perl5.git.perl.org / perl5.git / blobdiff