# Windows SDK 64-bit compiler and tools
#
# This is set up to build a perl.exe that runs off a shared library
-# (perl515.dll). Also makes individual DLLs for the XS extensions.
+# (perl517.dll). Also makes individual DLLs for the XS extensions.
#
##
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-#INST_VER = \5.15.2
+#INST_VER = \5.17.6
#
# Comment this out if you DON'T want your perl installation to have
USE_LARGE_FILES = define
#
+# Uncomment this if you're building a 32-bit perl and want 64-bit integers.
+# (If you're building a 64-bit perl then you will have 64-bit integers whether
+# or not this is uncommented.)
+#USE_64_BIT_INT = define
+
+#
# uncomment exactly one of the following
#
# Visual C++ 6.x (aka Visual C++ 98)
# set this to additionally provide a statically linked perl-static.exe.
# Note that dynamic loading will not work with this perl, so you must
# include required modules statically using the STATIC_EXT or ALL_STATIC
-# variables below. A static library perl515s.lib will also be created.
+# variables below. A static library perl517s.lib will also be created.
# Ordinary perl.exe is not affected by this option.
#
#BUILD_STATIC = define
USE_LARGE_FILES = undef
!ENDIF
+!IF "$(USE_64_BIT_INT)" == ""
+USE_64_BIT_INT = undef
+!ENDIF
+
!IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
USE_MULTI = define
!ENDIF
!ENDIF
!ENDIF
+!IF "$(WIN64)" == "define"
+USE_64_BIT_INT = define
+!ENDIF
+
# Treat 64-bit MSVC60 (doesn't really exist) as SDK2003SP1 because
# both link against MSVCRT.dll (which is part of Windows itself) and
# not against a compiler specific versioned runtime.
ARCHNAME = $(ARCHNAME)-thread
!ENDIF
+!IF "$(WIN64)" != "define"
+!IF "$(USE_64_BIT_INT)" == "define"
+ARCHNAME = $(ARCHNAME)-64int
+!ENDIF
+!ENDIF
+
# Visual C++ 98, .NET 2003, 2005/2008/2010 specific.
# VC++ 6/7/8/9/10.x can load DLLs on demand. Makes the test suite run
# in about 10% less time. (The free version of 7.x can't do this, but the free
# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
-PERLIMPLIB = ..\perl515.lib
-PERLSTATICLIB = ..\perl515s.lib
-PERLDLL = ..\perl515.dll
+PERLIMPLIB = ..\perl517.lib
+PERLSTATICLIB = ..\perl517s.lib
+PERLDLL = ..\perl517.dll
MINIPERL = ..\miniperl.exe
MINIDIR = .\mini
FIRSTUNIFILE = ..\lib\unicore\Decomposition.pl
UNIDATAFILES = ..\lib\unicore\Decomposition.pl \
..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
- ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst \
+ ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst \
+ ..\lib\unicore\UCD.pl ..\lib\unicore\Name.pm \
..\lib\unicore\TestProp.pl
# Directories of Unicode data files generated by mktables
..\utils\ptar \
..\utils\ptardiff \
..\utils\ptargrep \
+ ..\utils\zipdetails \
..\utils\cpanp-run-perl \
..\utils\cpanp \
..\utils\cpan2dist \
..\utils\shasum \
..\utils\instmodsh \
..\utils\json_pp \
+ ..\utils\pod2html \
..\x2p\find2perl \
..\x2p\psed \
..\x2p\s2p \
MAKE = nmake -nologo
MAKE_BARE = nmake
-!IF "$(WIN64)" == "define"
-CFGSH_TMPL = config.vc64
-CFGH_TMPL = config_H.vc64
-!ELSE
CFGSH_TMPL = config.vc
CFGH_TMPL = config_H.vc
-!ENDIF
XCOPY = xcopy /f /r /i /d /y
RCOPY = xcopy /f /r /i /e /d /y
DYNALOADER = ..\DynaLoader$(o)
CFG_VARS = \
- "INST_DRV=$(INST_DRV)" \
"INST_TOP=$(INST_TOP)" \
"INST_VER=$(INST_VER)" \
"INST_ARCH=$(INST_ARCH)" \
"useithreads=$(USE_ITHREADS)" \
"usemultiplicity=$(USE_MULTI)" \
"useperlio=$(USE_PERLIO)" \
+ "use64bitint=$(USE_64_BIT_INT)" \
"uselargefiles=$(USE_LARGE_FILES)" \
"usesitecustomize=$(USE_SITECUST)" \
"LINK_FLAGS=$(LINK_FLAGS:"=\")" \
- "optimize=$(OPTIMIZE:"=\")"
+ "optimize=$(OPTIMIZE:"=\")" \
+ "WIN64=$(WIN64)"
ICWD = -I..\dist\Cwd -I..\dist\Cwd\lib
config.w32 : $(CFGSH_TMPL)
copy $(CFGSH_TMPL) config.w32
+#
+# Copy the template config.h and set configurables at the end of it
+# as per the options chosen and compiler used.
+# Note: This config.h is only used to build miniperl.exe anyway, but
+# it's as well to have its options correct to be sure that it builds
+# and so that it's "-V" options are correct for use by makedef.pl. The
+# real config.h used to build perl.exe is generated from the top-level
+# config_h.SH by config_h.PL (run by miniperl.exe).
+#
.\config.h : $(CFGH_TMPL)
-del /f config.h
copy $(CFGH_TMPL) config.h
+ @echo.>>$@
+ @echo #ifndef _config_h_footer_>>$@
+ @echo #define _config_h_footer_>>$@
+ @echo #undef PTRSIZE>>$@
+ @echo #undef SSize_t>>$@
+ @echo #undef HAS_ATOLL>>$@
+ @echo #undef HAS_STRTOLL>>$@
+ @echo #undef HAS_STRTOULL>>$@
+ @echo #undef IVTYPE>>$@
+ @echo #undef UVTYPE>>$@
+ @echo #undef IVSIZE>>$@
+ @echo #undef UVSIZE>>$@
+ @echo #undef NV_PRESERVES_UV>>$@
+ @echo #undef NV_PRESERVES_UV_BITS>>$@
+ @echo #undef IVdf>>$@
+ @echo #undef UVuf>>$@
+ @echo #undef UVof>>$@
+ @echo #undef UVxf>>$@
+ @echo #undef UVXf>>$@
+ @echo #undef USE_64_BIT_INT>>$@
+ @echo #undef Size_t_size>>$@
+!IF "$(WIN64)"=="define"
+ @echo #define PTRSIZE ^8>>$@
+ @echo #define SSize_t __int64>>$@
+ @echo #define HAS_ATOLL>>$@
+ @echo #define HAS_STRTOLL>>$@
+ @echo #define HAS_STRTOULL>>$@
+ @echo #define Size_t_size ^8>>$@
+!ELSE
+ @echo #define PTRSIZE ^4>>$@
+ @echo #define SSize_t int>>$@
+ @echo #undef HAS_ATOLL>>$@
+ @echo #undef HAS_STRTOLL>>$@
+ @echo #undef HAS_STRTOULL>>$@
+ @echo #define Size_t_size ^4>>$@
+!ENDIF
+!IF "$(USE_64_BIT_INT)"=="define"
+ @echo #define IVTYPE __int64>>$@
+ @echo #define UVTYPE unsigned __int64>>$@
+ @echo #define IVSIZE ^8>>$@
+ @echo #define UVSIZE ^8>>$@
+ @echo #undef NV_PRESERVES_UV>>$@
+ @echo #define NV_PRESERVES_UV_BITS 53>>$@
+ @echo #define IVdf "I64d">>$@
+ @echo #define UVuf "I64u">>$@
+ @echo #define UVof "I64o">>$@
+ @echo #define UVxf "I64x">>$@
+ @echo #define UVXf "I64X">>$@
+ @echo #define USE_64_BIT_INT>>$@
+!ELSE
+ @echo #define IVTYPE long>>$@
+ @echo #define UVTYPE unsigned long>>$@
+ @echo #define IVSIZE ^4>>$@
+ @echo #define UVSIZE ^4>>$@
+ @echo #define NV_PRESERVES_UV>>$@
+ @echo #define NV_PRESERVES_UV_BITS 32>>$@
+ @echo #define IVdf "ld">>$@
+ @echo #define UVuf "lu">>$@
+ @echo #define UVof "lo">>$@
+ @echo #define UVxf "lx">>$@
+ @echo #define UVXf "lX">>$@
+ @echo #undef USE_64_BIT_INT>>$@
+!ENDIF
+ @echo #endif>>$@
..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
cd ..
..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
-# this target is for when changes to the main config.sh happen.
-# edit config.vc, then make perl in a minimal configuration (i.e. with MULTI,
-# ITHREADS, IMP_SYS, LARGE_FILES, PERLIO and CRYPT off), then make this target
+# This target is for when changes to the main config.sh happen.
+# Edit config.vc, then make perl in a minimal configuration (i.e. with MULTI,
+# ITHREADS, IMP_SYS, LARGE_FILES and PERLIO off), then make this target
# to regenerate config_H.vc.
-# repeat for config.vc64 and config_H.vc64 if you have a suitable build
-# environment, otherwise hand-edit them to maintain the same differences with
-# config.vc and config_H.vc as before.
-# unfortunately, some further manual editing is also then required to restore all
-# the special __GNUC__ handling that is otherwise lost.
regen_config_h:
$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
$(MINIPERL) -I..\lib ..\configpm --chdir=..
-del /f $(CFGH_TMPL)
- -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
+ -$(MINIPERL) -I..\lib $(ICWD) config_h.PL
rename config.h $(CFGH_TMPL)
$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
$(XCOPY) ..\*.h $(COREDIR)\*.*
$(XCOPY) *.h $(COREDIR)\*.*
$(RCOPY) include $(COREDIR)\*.*
- -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
+ -$(MINIPERL) -I..\lib $(ICWD) config_h.PL
if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
..\lib\buildcustomize.pl: $(MINIPERL) ..\write_buildcustomize.pl
$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
$(LINK32) -subsystem:console -out:$@ @<<
- $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
+ $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(MINI_OBJ)
<<
$(EMBED_EXE_MANI)
$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*F).c
$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
+ $(CC) -c $(CFLAGS) -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(*F).c
# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
$(DLL_OBJ) : $(CORE_H)
$(X2P_OBJ) : $(CORE_H)
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\makedef.pl create_perllibst_h.pl
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl create_perllibst_h.pl
$(MINIPERL) -I..\lib create_perllibst_h.pl
$(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
CCTYPE=$(CCTYPE) TARG_DIR=..\ > perldll.def
$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
$(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
-Extensions_nonxs: ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM)
+Extensions_nonxs: ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) ..\pod\perlfunc.pod
$(XCOPY) ..\*.h $(COREDIR)\*.*
$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
doc: $(PERLEXE) ..\pod\perltoc.pod
$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
- --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
- --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
+ --podpath=pod:lib:utils --htmlroot="file://$(INST_HTML::=|)" \
+ --recurse
# Note that this next section is parsed (and regenerated) by pod/buildtoc
# so please check that script before making structural changes here
copy ..\README.linux ..\pod\perllinux.pod
copy ..\README.macos ..\pod\perlmacos.pod
copy ..\README.macosx ..\pod\perlmacosx.pod
- copy ..\README.mpeix ..\pod\perlmpeix.pod
copy ..\README.netware ..\pod\perlnetware.pod
copy ..\README.openbsd ..\pod\perlopenbsd.pod
copy ..\README.os2 ..\pod\perlos2.pod
copy ..\README.symbian ..\pod\perlsymbian.pod
copy ..\README.tru64 ..\pod\perltru64.pod
copy ..\README.tw ..\pod\perltw.pod
- copy ..\README.uts ..\pod\perluts.pod
- copy ..\README.vmesa ..\pod\perlvmesa.pod
copy ..\README.vos ..\pod\perlvos.pod
copy ..\README.win32 ..\pod\perlwin32.pod
- copy ..\pod\perldelta.pod ..\pod\perl5153delta.pod
+ copy ..\pod\perldelta.pod ..\pod\perl5176delta.pod
cd ..\win32
$(PERLEXE) $(PL2BAT) $(UTILS)
$(PERLEXE) $(ICWD) ..\autodoc.pl ..
$(PERLEXE) $(ICWD) ..\pod\perlmodlib.pl -q
..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
- $(PERLEXE) -f ..\pod\buildtoc --build-toc -q
+ $(PERLEXE) -f ..\pod\buildtoc -q
# Note that the pod cleanup in this next section is parsed (and regenerated
# by pod/buildtoc so please check that script before making changes here
-if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate
-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
-if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
- -cd $(PODDIR) && del /f *.html *.bat \
- perl5153delta.pod perlaix.pod perlamiga.pod perlapi.pod \
+ -cd $(PODDIR) && del /f *.html *.bat roffitall \
+ perl5176delta.pod perlaix.pod perlamiga.pod perlapi.pod \
perlbeos.pod perlbs2000.pod perlce.pod perlcn.pod \
perlcygwin.pod perldgux.pod perldos.pod perlepoc.pod \
perlfreebsd.pod perlhaiku.pod perlhpux.pod perlhurd.pod \
perlintern.pod perlirix.pod perljp.pod perlko.pod perllinux.pod \
- perlmacos.pod perlmacosx.pod perlmodlib.pod perlmpeix.pod \
- perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
- perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
- perlsolaris.pod perlsymbian.pod perltoc.pod perltru64.pod \
- perltw.pod perluniprops.pod perluts.pod perlvmesa.pod \
- perlvos.pod perlwin32.pod
+ perlmacos.pod perlmacosx.pod perlmodlib.pod perlnetware.pod \
+ perlopenbsd.pod perlos2.pod perlos390.pod perlos400.pod \
+ perlplan9.pod perlqnx.pod perlriscos.pod perlsolaris.pod \
+ perlsymbian.pod perltoc.pod perltru64.pod perltw.pod \
+ perluniprops.pod perlvos.pod perlwin32.pod
-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
perldoc perlivp libnetcfg enc2xs piconv cpan *.bat \
- xsubpp instmodsh json_pp prove ptar ptardiff ptargrep cpanp-run-perl cpanp cpan2dist shasum corelist config_data
+ xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep cpanp-run-perl cpanp cpan2dist shasum corelist config_data zipdetails
-cd ..\x2p && del /f find2perl s2p psed *.bat
-del /f ..\config.sh perlmain.c dlutils.c config.h.new \
perlmainst.c
-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
-if exist $(COREDIR) rmdir /s /q $(COREDIR)
-if exist pod2htmd.tmp del pod2htmd.tmp
- -if exist pod2htmi.tmp del pod2htmi.tmp
-if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
-del /f ..\t\test_state
$(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
cd ..\win32
+test_porting : test-prep
+ cd ..\t
+ $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) porting\*.t ..\lib\diagnostics.t
+ cd ..\win32
+
test-reonly : reonly utils
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
$(XCOPY) $(PERLDLL) ..\t\$(NULL)