-/*
- * This file was produced by running the config_h.SH script, which
+/* This file was produced by running the config_h.SH script, which
* gets its values from undef, which is generally produced by
* running Configure.
*
* Feel free to modify any of this as the need arises. Note, however,
* that running config_h.SH again will wipe out any changes you've made.
* For a more permanent change edit undef and rerun config_h.SH.
- *
- * $Id: Config_h.U 1 2006-08-24 12:32:52Z rmanfredi $
*/
-/*
- * Package name : perl5
+/* Package name : perl5
* Source directory :
- * Configuration time: Sun Jan 10 19:53:56 2010
- * Configured by : Steve
+ * Configuration time: Wed Sep 18 14:03:46 2013
+ * Configured by : shay
* Target system :
*/
* This symbol, if defined, indicates that the crypt routine is available
* to encrypt passwords and the like.
*/
-/*#define HAS_CRYPT / **/
+#define HAS_CRYPT /**/
/* HAS_CTERMID:
* This symbol, if defined, indicates that the ctermid routine is
* should be included.
*/
/*#define I_DBM / **/
-#define I_RPCSVC_DBM /**/
+/*#define I_RPCSVC_DBM / **/
/* I_DLFCN:
* This symbol, if defined, indicates that <dlfcn.h> exists and should
*/
/*#define I_NETINET_IN / **/
-/* I_SFIO:
- * This symbol, if defined, indicates to the C program that it should
- * include <sfio.h>.
- */
-/*#define I_SFIO / **/
-
/* I_STDDEF:
* This symbol, if defined, indicates that <stddef.h> exists and should
* be included.
#define _V(args) ()
#endif
-/* INTSIZE:
- * This symbol contains the value of sizeof(int) so that the C
- * preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- * This symbol contains the value of sizeof(long) so that the C
- * preprocessor can make decisions based on it.
+/* OSNAME:
+ * This symbol contains the name of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
*/
-/* SHORTSIZE:
- * This symbol contains the value of sizeof(short) so that the C
- * preprocessor can make decisions based on it.
+/* OSVERS:
+ * This symbol contains the version of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
*/
-#define INTSIZE 4 /**/
-#define LONGSIZE 4 /**/
-#define SHORTSIZE 2 /**/
+#define OSNAME "MSWin32" /**/
+#define OSVERS "6.1" /**/
/* MULTIARCH:
* This symbol, if defined, signifies that the build
*/
/*#define MULTIARCH / **/
-/* HAS_QUAD:
- * This symbol, if defined, tells that there's a 64-bit integer type,
- * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
- * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, QUAD_IS_INT64_T,
- * or QUAD_IS___INT64.
+/* USE_CROSS_COMPILE:
+ * This symbol, if defined, indicates that Perl is being cross-compiled.
*/
-#define HAS_QUAD /**/
-#ifdef HAS_QUAD
-# ifndef _MSC_VER
-# define Quad_t long long /**/
-# define Uquad_t unsigned long long /**/
-# define QUADKIND 3 /**/
-# else
-# define Quad_t __int64 /**/
-# define Uquad_t unsigned __int64 /**/
-# define QUADKIND 5 /**/
-# endif
-# define QUAD_IS_INT 1
-# define QUAD_IS_LONG 2
-# define QUAD_IS_LONG_LONG 3
-# define QUAD_IS_INT64_T 4
-# define QUAD_IS___INT64 5
+/* PERL_TARGETARCH:
+ * This symbol, if defined, indicates the target architecture
+ * Perl has been cross-compiled to. Undefined if not a cross-compile.
+ */
+#ifndef USE_CROSS_COMPILE
+/*#define USE_CROSS_COMPILE / **/
+#define PERL_TARGETARCH "" /**/
#endif
-/* OSNAME:
- * This symbol contains the name of the operating system, as determined
- * by Configure. You shouldn't rely on it too much; the specific
- * feature tests from Configure are generally more reliable.
- */
-/* OSVERS:
- * This symbol contains the version of the operating system, as determined
- * by Configure. You shouldn't rely on it too much; the specific
- * feature tests from Configure are generally more reliable.
+/* MEM_ALIGNBYTES:
+ * This symbol contains the number of bytes required to align a
+ * double, or a long double when applicable. Usual values are 2,
+ * 4 and 8. The default is eight, for safety. For cross-compiling
+ * or multiarch support, Configure will set a minimum of 8.
*/
-#define OSNAME "MSWin32" /**/
-#define OSVERS "5.1" /**/
+#define MEM_ALIGNBYTES 8
/* ARCHLIB:
* This variable, if defined, holds the name of the directory in
#define BIN_EXP "c:\\perl\\bin" /**/
#define PERL_RELOCATABLE_INC "undef" /**/
+/* INTSIZE:
+ * This symbol contains the value of sizeof(int) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* LONGSIZE:
+ * This symbol contains the value of sizeof(long) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* SHORTSIZE:
+ * This symbol contains the value of sizeof(short) so that the C
+ * preprocessor can make decisions based on it.
+ */
+#define INTSIZE 4 /**/
+#define LONGSIZE 4 /**/
+#define SHORTSIZE 2 /**/
+
+/* BYTEORDER:
+ * This symbol holds the hexadecimal constant defined in byteorder,
+ * in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
+ * If the compiler supports cross-compiling or multiple-architecture
+ * binaries (e.g. on NeXT systems), use compiler-defined macros to
+ * determine the byte order.
+ * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
+ * Binaries (MAB) on either big endian or little endian machines.
+ * The endian-ness is available at compile-time. This only matters
+ * for perl, where the config.h can be generated and installed on
+ * one system, and used by a different architecture to build an
+ * extension. Older versions of NeXT that might not have
+ * defined either *_ENDIAN__ were all on Motorola 680x0 series,
+ * so the default case (for NeXT) is big endian to catch them.
+ * This might matter for NeXT 3.0.
+ */
+#if defined(MULTIARCH)
+# ifdef __LITTLE_ENDIAN__
+# if LONGSIZE == 4
+# define BYTEORDER 0x1234
+# else
+# if LONGSIZE == 8
+# define BYTEORDER 0x12345678
+# endif
+# endif
+# else
+# ifdef __BIG_ENDIAN__
+# if LONGSIZE == 4
+# define BYTEORDER 0x4321
+# else
+# if LONGSIZE == 8
+# define BYTEORDER 0x87654321
+# endif
+# endif
+# endif
+# endif
+# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
+# define BYTEORDER 0x4321
+# endif
+#else
+#define BYTEORDER 0x1234 /* large digits for MSB */
+#endif /* NeXT */
+
+/* CHARBITS:
+ * This symbol contains the size of a char, so that the C preprocessor
+ * can make decisions based on it.
+ */
+#define CHARBITS 8 /**/
+
/* CAT2:
* This macro concatenates 2 tokens together.
*/
* This symbol is intended to be used along with CPPRUN in the same manner
* symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
*/
-#ifndef _MSC_VER
-# define CPPSTDIN "gcc -E"
-# define CPPMINUS "-"
-# define CPPRUN "gcc -E"
-#else
-# define CPPSTDIN "cppstdin"
-# define CPPMINUS ""
-# define CPPRUN "cl -nologo -E"
-#endif
+#define CPPSTDIN "gcc -E"
+#define CPPMINUS "-"
+#define CPPRUN "gcc -E"
#define CPPLAST ""
/* HAS_ACCESS:
/*#define HASATTRIBUTE_UNUSED / **/
/*#define HASATTRIBUTE_WARN_UNUSED_RESULT / **/
+/* CASTI32:
+ * This symbol is defined if the C compiler can cast negative
+ * or large floating point numbers to 32-bit ints.
+ */
+#define CASTI32 /**/
+
+/* CASTNEGFLOAT:
+ * This symbol is defined if the C compiler can cast negative
+ * numbers to unsigned longs, ints and shorts.
+ */
+/* CASTFLAGS:
+ * This symbol contains flags that say what difficulties the compiler
+ * has casting odd floating values to unsigned long:
+ * 0 = ok
+ * 1 = couldn't cast < 0
+ * 2 = couldn't cast >= 0x80000000
+ * 4 = couldn't cast in argument expression list
+ */
+#define CASTNEGFLOAT /**/
+#define CASTFLAGS 0 /**/
+
+/* VOID_CLOSEDIR:
+ * This symbol, if defined, indicates that the closedir() routine
+ * does not return a value.
+ */
+/*#define VOID_CLOSEDIR / **/
+
/* HASCONST:
* This symbol, if defined, indicates that this C compiler knows about
* the const type. There is no need to actually test for that symbol
/*#define HAS_CTIME_R / **/
#define CTIME_R_PROTO 0 /**/
+/* SETUID_SCRIPTS_ARE_SECURE_NOW:
+ * This symbol, if defined, indicates that the bug that prevents
+ * setuid scripts from being secure is not present in this kernel.
+ */
+/* DOSUID:
+ * This symbol, if defined, indicates that the C program should
+ * check the script that it is executing for setuid/setgid bits, and
+ * attempt to emulate setuid/setgid on systems that have disabled
+ * setuid #! scripts because the kernel can't do it securely.
+ * It is up to the package designer to make sure that this emulation
+ * is done securely. Among other things, it should do an fstat on
+ * the script it just opened to make sure it really is a setuid/setgid
+ * script, it should make sure the arguments passed correspond exactly
+ * to the argument on the #! line, and it should not trust any
+ * subprocesses to which it must pass the filename rather than the
+ * file descriptor of the script to be executed.
+ */
+/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
+/*#define DOSUID / **/
+
/* HAS_DRAND48_R:
* This symbol, if defined, indicates that the drand48_r routine
* is available to drand48 re-entrantly.
/*#define HAS_ENDSERVENT_R / **/
#define ENDSERVENT_R_PROTO 0 /**/
+/* HAS_FD_SET:
+ * This symbol, when defined, indicates presence of the fd_set typedef
+ * in <sys/types.h>
+ */
+#define HAS_FD_SET /**/
+
/* FLEXFILENAMES:
* This symbol, if defined, indicates that the system supports filenames
* longer than 14 characters.
*/
#define FLEXFILENAMES /**/
+/* Gconvert:
+ * This preprocessor macro is defined to convert a floating point
+ * number to a string without a trailing decimal point. This
+ * emulates the behavior of sprintf("%g"), but is sometimes much more
+ * efficient. If gconvert() is not available, but gcvt() drops the
+ * trailing decimal point, then gcvt() is used. If all else fails,
+ * a macro using sprintf("%g") is used. Arguments for the Gconvert
+ * macro are: value, number of digits, whether trailing zeros should
+ * be retained, and the output buffer.
+ * The usual values are:
+ * d_Gconvert='gconvert((x),(n),(t),(b))'
+ * d_Gconvert='gcvt((x),(n),(b))'
+ * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ * The last two assume trailing zeros should not be kept.
+ */
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+
/* HAS_GETGRENT:
* This symbol, if defined, indicates that the getgrent routine is
* available for sequential access of the group database.
*/
/*#define HAS_GETNET_PROTOS / **/
+/* HAS_GETPAGESIZE:
+ * This symbol, if defined, indicates that the getpagesize system call
+ * is available to get system page size, which is the granularity of
+ * many memory management calls.
+ */
+/*#define HAS_GETPAGESIZE / **/
+
/* HAS_GETPROTOENT:
* This symbol, if defined, indicates that the getprotoent() routine is
* available to look up protocols in some data base or another.
/*#define HAS_GMTIME_R / **/
#define GMTIME_R_PROTO 0 /**/
+/* HAS_GNULIBC:
+ * This symbol, if defined, indicates to the C program that
+ * the GNU C library is being used. A better check is to use
+ * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
+ */
+/*#define HAS_GNULIBC / **/
+#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
+# define _GNU_SOURCE
+#endif
+
/* HAS_HTONL:
* This symbol, if defined, indicates that the htonl() routine (and
* friends htons() ntohl() ntohs()) are available to do network
#define HAS_NTOHL /**/
#define HAS_NTOHS /**/
+/* HAS_ISASCII:
+ * This manifest constant lets the C program know that isascii
+ * is available.
+ */
+#define HAS_ISASCII /**/
+
+/* HAS_LCHOWN:
+ * This symbol, if defined, indicates that the lchown routine is
+ * available to operate on a symbolic link (instead of following the
+ * link).
+ */
+/*#define HAS_LCHOWN / **/
+
/* HAS_LOCALTIME_R:
* This symbol, if defined, indicates that the localtime_r routine
* is available to localtime re-entrantly.
*/
#define HAS_LONG_DOUBLE /**/
#ifdef HAS_LONG_DOUBLE
-# ifndef _MSC_VER
-# define LONG_DOUBLESIZE 12 /**/
-# else
-# define LONG_DOUBLESIZE 8 /**/
-# endif
+#define LONG_DOUBLESIZE 12 /**/
#endif
/* HAS_LONG_LONG:
* C preprocessor can make decisions based on it. It is only
* defined if the system supports long long.
*/
-/*#define HAS_LONG_LONG / **/
+#define HAS_LONG_LONG /**/
#ifdef HAS_LONG_LONG
#define LONGLONGSIZE 8 /**/
#endif
*/
/*#define HAS_MSG / **/
+/* HAS_OPEN3:
+ * This manifest constant lets the C program know that the three
+ * argument form of open(2) is available.
+ */
+/*#define HAS_OPEN3 / **/
+
/* OLD_PTHREAD_CREATE_JOINABLE:
* This symbol, if defined, indicates how to create pthread
* in joinable (aka undetached) state. NOTE: not defined
/*#define HAS_READDIR_R / **/
#define READDIR_R_PROTO 0 /**/
+/* HAS_SAFE_BCOPY:
+ * This symbol, if defined, indicates that the bcopy routine is available
+ * to copy potentially overlapping memory blocks. Normally, you should
+ * probably use memmove() or memcpy(). If neither is defined, roll your
+ * own version.
+ */
+/*#define HAS_SAFE_BCOPY / **/
+
+/* HAS_SAFE_MEMCPY:
+ * This symbol, if defined, indicates that the memcpy routine is available
+ * to copy potentially overlapping memory blocks. If you need to
+ * copy overlapping memory blocks, you should check HAS_MEMMOVE and
+ * use memmove() instead, if available.
+ */
+/*#define HAS_SAFE_MEMCPY / **/
+
+/* HAS_SANE_MEMCMP:
+ * This symbol, if defined, indicates that the memcmp routine is available
+ * and can be used to compare relative magnitudes of chars with their high
+ * bits set. If it is not defined, roll your own version.
+ */
+#define HAS_SANE_MEMCMP /**/
+
/* HAS_SEM:
* This symbol, if defined, indicates that the entire sem*(2) library is
* supported.
#define Shmat_t void * /**/
/*#define HAS_SHMAT_PROTOTYPE / **/
-/* HAS_SOCKET:
+/* HAS_SIGACTION:
+ * This symbol, if defined, indicates that Vr4's sigaction() routine
+ * is available.
+ */
+/*#define HAS_SIGACTION / **/
+
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
+/* Sigjmp_buf:
+ * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ * This macro is used in the same way as sigsetjmp(), but will invoke
+ * traditional setjmp() if sigsetjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+/* Siglongjmp:
+ * This macro is used in the same way as siglongjmp(), but will invoke
+ * traditional longjmp() if siglongjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+/*#define HAS_SIGSETJMP / **/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
+#endif
+
+/* HAS_SOCKET:
* This symbol, if defined, indicates that the BSD socket interface is
* supported.
*/
* Checking just with #ifdef might not be enough because this symbol
* has been known to be an enum.
*/
+/* HAS_SOCKADDR_SA_LEN:
+ * This symbol, if defined, indicates that the struct sockaddr
+ * structure has a member called sa_len, indicating the length of
+ * the structure.
+ */
+/* HAS_SOCKADDR_IN6:
+ * This symbol, if defined, indicates the availability of
+ * struct sockaddr_in6;
+ */
+/* HAS_SIN6_SCOPE_ID:
+ * This symbol, if defined, indicates that the struct sockaddr_in6
+ * structure has a member called sin6_scope_id.
+ */
+/* HAS_IP_MREQ:
+ * This symbol, if defined, indicates the availability of
+ * struct ip_mreq;
+ */
+/* HAS_IP_MREQ_SOURCE:
+ * This symbol, if defined, indicates the availability of
+ * struct ip_mreq_source;
+ */
+/* HAS_IPV6_MREQ:
+ * This symbol, if defined, indicates the availability of
+ * struct ipv6_mreq;
+ */
+/* HAS_IPV6_MREQ_SOURCE:
+ * This symbol, if defined, indicates the availability of
+ * struct ipv6_mreq_source;
+ */
#define HAS_SOCKET /**/
/*#define HAS_SOCKETPAIR / **/
+/*#define HAS_SOCKADDR_SA_LEN / **/
/*#define HAS_MSG_CTRUNC / **/
/*#define HAS_MSG_DONTROUTE / **/
/*#define HAS_MSG_OOB / **/
/*#define HAS_MSG_PEEK / **/
/*#define HAS_MSG_PROXY / **/
/*#define HAS_SCM_RIGHTS / **/
+/*#define HAS_SOCKADDR_IN6 / **/
+#define HAS_SIN6_SCOPE_ID /**/
+/*#define HAS_IP_MREQ / **/
+/*#define HAS_IP_MREQ_SOURCE / **/
+/*#define HAS_IPV6_MREQ / **/
+/*#define HAS_IPV6_MREQ_SOURCE / **/
/* HAS_SRAND48_R:
* This symbol, if defined, indicates that the srand48_r routine
/*#define USE_STAT_BLOCKS / **/
#endif
+/* HAS_STATIC_INLINE:
+ * This symbol, if defined, indicates that the C compiler supports
+ * C99-style static inline. That is, the function can't be called
+ * from another translation unit.
+ */
+/* PERL_STATIC_INLINE:
+ * This symbol gives the best-guess incantation to use for static
+ * inline functions. If HAS_STATIC_INLINE is defined, this will
+ * give C99-style inline. If HAS_STATIC_INLINE is not defined,
+ * this will give a plain 'static'. It will always be defined
+ * to something that gives static linkage.
+ * Possibilities include
+ * static inline (c99)
+ * static __inline__ (gcc -ansi)
+ * static __inline (MSVC)
+ * static _inline (older MSVC)
+ * static (c89 compilers)
+ */
+#define HAS_STATIC_INLINE /**/
+#define PERL_STATIC_INLINE static __inline__ /**/
+
+/* USE_STDIO_PTR:
+ * This symbol is defined if the _ptr and _cnt fields (or similar)
+ * of the stdio FILE structure can be used to access the stdio buffer
+ * for a file handle. If this is defined, then the FILE_ptr(fp)
+ * and FILE_cnt(fp) macros will also be defined and should be used
+ * to access these fields.
+ */
+/* FILE_ptr:
+ * This macro is used to access the _ptr field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_PTR_LVALUE:
+ * This symbol is defined if the FILE_ptr macro can be used as an
+ * lvalue.
+ */
+/* FILE_cnt:
+ * This macro is used to access the _cnt field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_CNT_LVALUE:
+ * This symbol is defined if the FILE_cnt macro can be used as an
+ * lvalue.
+ */
+/* STDIO_PTR_LVAL_SETS_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n has the side effect of decreasing the
+ * value of File_cnt(fp) by n.
+ */
+/* STDIO_PTR_LVAL_NOCHANGE_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n leaves File_cnt(fp) unchanged.
+ */
+#define USE_STDIO_PTR /**/
+#ifdef USE_STDIO_PTR
+#define FILE_ptr(fp) ((fp)->_ptr)
+#define STDIO_PTR_LVALUE /**/
+#define FILE_cnt(fp) ((fp)->_cnt)
+#define STDIO_CNT_LVALUE /**/
+/*#define STDIO_PTR_LVAL_SETS_CNT / **/
+#define STDIO_PTR_LVAL_NOCHANGE_CNT /**/
+#endif
+
+/* USE_STDIO_BASE:
+ * This symbol is defined if the _base field (or similar) of the
+ * stdio FILE structure can be used to access the stdio buffer for
+ * a file handle. If this is defined, then the FILE_base(fp) macro
+ * will also be defined and should be used to access this field.
+ * Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ * to determine the number of bytes in the buffer. USE_STDIO_BASE
+ * will never be defined unless USE_STDIO_PTR is.
+ */
+/* FILE_base:
+ * This macro is used to access the _base field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_BASE is defined.
+ */
+/* FILE_bufsiz:
+ * This macro is used to determine the number of bytes in the I/O
+ * buffer pointed to by _base field (or equivalent) of the FILE
+ * structure pointed to its argument. This macro will always be defined
+ * if USE_STDIO_BASE is defined.
+ */
+#define USE_STDIO_BASE /**/
+#ifdef USE_STDIO_BASE
+#define FILE_base(fp) ((fp)->_base)
+#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
+#endif
+
/* USE_STRUCT_COPY:
* This symbol, if defined, indicates that this C compiler knows how
* to copy structures. If undefined, you'll need to use a block copy
#define volatile
#endif
+/* HAS_VPRINTF:
+ * This symbol, if defined, indicates that the vprintf routine is available
+ * to printf with a pointer to an argument list. If unavailable, you
+ * may need to write your own, probably in terms of _doprnt().
+ */
+/* USE_CHAR_VSPRINTF:
+ * This symbol is defined if this system has vsprintf() returning type
+ * (char*). The trend seems to be to declare it as "int vsprintf()". It
+ * is up to the package author to declare vsprintf correctly based on the
+ * symbol.
+ */
+#define HAS_VPRINTF /**/
+/*#define USE_CHAR_VSPRINTF / **/
+
+/* DOUBLESIZE:
+ * This symbol contains the size of a double, so that the C preprocessor
+ * can make decisions based on it.
+ */
+#define DOUBLESIZE 8 /**/
+
+/* EBCDIC:
+ * This symbol, if defined, indicates that this system uses
+ * EBCDIC encoding.
+ */
+/* BOOTSTRAP_CHARSET:
+ * This symbol, if defined, indicates that this system needs
+ * converting various files to the native character set before
+ * bringing up perl on a system that has a non-ASCII character
+ * set and no working perl.
+ */
+/*#define EBCDIC / **/
+/*#define BOOTSTRAP_CHARSET / **/
+
/* Fpos_t:
* This symbol holds the type used to declare file positions in libc.
* It can be fpos_t, long, uint, etc... It may be necessary to include
#define Gid_t_f "ld" /**/
/* Gid_t_sign:
- * This symbol holds the signedess of a Gid_t.
+ * This symbol holds the signedness of a Gid_t.
* 1 for unsigned, -1 for signed.
*/
#define Gid_t_sign -1 /* GID sign */
*/
/*#define I_SYSUIO / **/
+/* I_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <time.h>.
+ */
+/* I_SYS_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h>.
+ */
+/* I_SYS_TIME_KERNEL:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h> with KERNEL defined.
+ */
+/* HAS_TM_TM_ZONE:
+ * This symbol, if defined, indicates to the C program that
+ * the struct tm has a tm_zone field.
+ */
+/* HAS_TM_TM_GMTOFF:
+ * This symbol, if defined, indicates to the C program that
+ * the struct tm has a tm_gmtoff field.
+ */
+#define I_TIME /**/
+/*#define I_SYS_TIME / **/
+/*#define I_SYS_TIME_KERNEL / **/
+/*#define HAS_TM_TM_ZONE / **/
+/*#define HAS_TM_TM_GMTOFF / **/
+
/* I_STDARG:
* This symbol, if defined, indicates that <stdarg.h> exists and should
* be included.
*/
#define Mode_t mode_t /* file mode parameter for system calls */
+/* VAL_O_NONBLOCK:
+ * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ * non-blocking I/O for the file descriptor. Note that there is no way
+ * back, i.e. you cannot turn it blocking again this way. If you wish to
+ * alternatively switch between blocking and non-blocking, use the
+ * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+ */
+/* VAL_EAGAIN:
+ * This symbol holds the errno error code set by read() when no data was
+ * present on the non-blocking file descriptor.
+ */
+/* RD_NODATA:
+ * This symbol holds the return code from read() when no data is present
+ * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ * not defined, then you can't distinguish between no data and EOF by
+ * issuing a read(). You'll have to find another way to tell for sure!
+ */
+/* EOF_NONBLOCK:
+ * This symbol, if defined, indicates to the C program that a read() on
+ * a non-blocking file descriptor will return 0 on EOF, and not the value
+ * held in RD_NODATA (-1 usually, in that case!).
+ */
+#define VAL_O_NONBLOCK O_NONBLOCK
+#define VAL_EAGAIN EAGAIN
+#define RD_NODATA -1
+#define EOF_NONBLOCK
+
/* Netdb_host_t:
* This symbol holds the type used for the 1st argument
* to gethostbyaddr().
#ifdef CAN_PROTOTYPE
#define _(args) args
#else
-#define _(args) ()
-#endif
-
-/* Select_fd_set_t:
- * This symbol holds the type used for the 2nd, 3rd, and 4th
- * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
- * is defined, and 'int *' otherwise. This is only useful if you
- * have select(), of course.
- */
-#define Select_fd_set_t Perl_fd_set * /**/
-
-/* SH_PATH:
- * This symbol contains the full pathname to the shell used on this
- * on this system to execute Bourne shell scripts. Usually, this will be
- * /bin/sh, though it's possible that some systems will have /bin/ksh,
- * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
- * D:/bin/sh.exe.
- */
-#define SH_PATH "cmd /x /c" /**/
-
-/* SIG_NAME:
- * This symbol contains a list of signal names in order of
- * signal number. This is intended
- * to be used as a static array initialization, like this:
- * char *sig_name[] = { SIG_NAME };
- * The signals in the list are separated with commas, and each signal
- * is surrounded by double quotes. There is no leading SIG in the signal
- * name, i.e. SIGQUIT is known as "QUIT".
- * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
- * etc., where nn is the actual signal number (e.g. NUM37).
- * The signal number for sig_name[i] is stored in sig_num[i].
- * The last element is 0 to terminate the list with a NULL. This
- * corresponds to the 0 at the end of the sig_name_init list.
- * Note that this variable is initialized from the sig_name_init,
- * not from sig_name (which is unused).
- */
-/* SIG_NUM:
- * This symbol contains a list of signal numbers, in the same order as the
- * SIG_NAME list. It is suitable for static array initialization, as in:
- * int sig_num[] = { SIG_NUM };
- * The signals in the list are separated with commas, and the indices
- * within that list and the SIG_NAME list match, so it's easy to compute
- * the signal name from a number or vice versa at the price of a small
- * dynamic linear lookup.
- * Duplicates are allowed, but are moved to the end of the list.
- * The signal number corresponding to sig_name[i] is sig_number[i].
- * if (i < NSIG) then sig_number[i] == i.
- * The last element is 0, corresponding to the 0 at the end of
- * the sig_name_init list.
- * Note that this variable is initialized from the sig_num_init,
- * not from sig_num (which is unused).
- */
-/* SIG_SIZE:
- * This variable contains the number of elements of the SIG_NAME
- * and SIG_NUM arrays, excluding the final NULL entry.
- */
-#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "NUM16", "NUM17", "NUM18", "NUM19", "CHLD", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0 /**/
-#define SIG_NUM 0, 1, 2, 21, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0 /**/
-#define SIG_SIZE 27 /**/
-
-/* SITEARCH:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-dependent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
- */
-/* SITEARCH_EXP:
- * This symbol contains the ~name expanded version of SITEARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define SITEARCH "c:\\perl\\site\\lib" /**/
-/*#define SITEARCH_EXP "" / **/
-
-/* SITELIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-independent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
- */
-/* SITELIB_EXP:
- * This symbol contains the ~name expanded version of SITELIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/* SITELIB_STEM:
- * This define is SITELIB_EXP with any trailing version-specific component
- * removed. The elements in inc_version_list (inc_version_list.U) can
- * be tacked onto this variable to generate a list of directories to search.
- */
-#define SITELIB "c:\\perl\\site\\lib" /**/
-#define SITELIB_EXP (win32_get_sitelib(PERL_VERSION_STRING, NULL)) /**/
-#define SITELIB_STEM "" /**/
-
-/* Size_t_size:
- * This symbol holds the size of a Size_t in bytes.
- */
-#define Size_t_size 4 /**/
-
-/* Size_t:
- * This symbol holds the type used to declare length parameters
- * for string functions. It is usually size_t, but may be
- * unsigned long, int, etc. It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Size_t size_t /* length paramater for string functions */
-
-/* Sock_size_t:
- * This symbol holds the type used for the size argument of
- * various socket calls (just the base type, not the pointer-to).
- */
-#define Sock_size_t int /**/
-
-/* STDCHAR:
- * This symbol is defined to be the type of char used in stdio.h.
- * It has the values "unsigned char" or "char".
- */
-#define STDCHAR char /**/
-
-/* Uid_t_f:
- * This symbol defines the format string used for printing a Uid_t.
- */
-#define Uid_t_f "ld" /**/
-
-/* Uid_t_sign:
- * This symbol holds the signedess of a Uid_t.
- * 1 for unsigned, -1 for signed.
- */
-#define Uid_t_sign -1 /* UID sign */
-
-/* Uid_t_size:
- * This symbol holds the size of a Uid_t in bytes.
- */
-#define Uid_t_size 4 /* UID size */
-
-/* Uid_t:
- * This symbol holds the type used to declare user ids in the kernel.
- * It can be int, ushort, uid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Uid_t uid_t /* UID type */
-
-/* USE_ITHREADS:
- * This symbol, if defined, indicates that Perl should be built to
- * use the interpreter-based threading implementation.
- */
-/* USE_5005THREADS:
- * This symbol, if defined, indicates that Perl should be built to
- * use the 5.005-based threading implementation.
- * Only valid up to 5.8.x.
- */
-/* OLD_PTHREADS_API:
- * This symbol, if defined, indicates that Perl should
- * be built to use the old draft POSIX threads API.
- */
-/* USE_REENTRANT_API:
- * This symbol, if defined, indicates that Perl should
- * try to use the various _r versions of library functions.
- * This is extremely experimental.
- */
-/*#define USE_5005THREADS / **/
-/*#define USE_ITHREADS / **/
-#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
-#define USE_THREADS /* until src is revised*/
-#endif
-/*#define OLD_PTHREADS_API / **/
-/*#define USE_REENTRANT_API / **/
-
-/* PERL_VENDORARCH:
- * If defined, this symbol contains the name of a private library.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world.
- * It may have a ~ on the front.
- * The standard distribution will put nothing in this directory.
- * Vendors who distribute perl may wish to place their own
- * architecture-dependent modules and extensions in this directory with
- * MakeMaker Makefile.PL INSTALLDIRS=vendor
- * or equivalent. See INSTALL for details.
- */
-/* PERL_VENDORARCH_EXP:
- * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/*#define PERL_VENDORARCH "" / **/
-/*#define PERL_VENDORARCH_EXP "" / **/
-
-/* PERL_VENDORLIB_EXP:
- * This symbol contains the ~name expanded version of VENDORLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/* PERL_VENDORLIB_STEM:
- * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
- * removed. The elements in inc_version_list (inc_version_list.U) can
- * be tacked onto this variable to generate a list of directories to search.
- */
-/*#define PERL_VENDORLIB_EXP "" / **/
-/*#define PERL_VENDORLIB_STEM "" / **/
-
-/* VOIDFLAGS:
- * This symbol indicates how much support of the void type is given by this
- * compiler. What various bits mean:
- *
- * 1 = supports declaration of void
- * 2 = supports arrays of pointers to functions returning void
- * 4 = supports comparisons between pointers to void functions and
- * addresses of void functions
- * 8 = suports declaration of generic void pointers
- *
- * The package designer should define VOIDUSED to indicate the requirements
- * of the package. This can be done either by #defining VOIDUSED before
- * including config.h, or by defining defvoidused in Myinit.U. If the
- * latter approach is taken, only those flags will be tested. If the
- * level of void support necessary is not present, defines void to int.
- */
-#ifndef VOIDUSED
-#define VOIDUSED 15
-#endif
-#define VOIDFLAGS 15
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int /* is void to be avoided? */
-#define M_VOID /* Xenix strikes again */
-#endif
-
-/* USE_CROSS_COMPILE:
- * This symbol, if defined, indicates that Perl is being cross-compiled.
- */
-/* PERL_TARGETARCH:
- * This symbol, if defined, indicates the target architecture
- * Perl has been cross-compiled to. Undefined if not a cross-compile.
- */
-#ifndef USE_CROSS_COMPILE
-/*#define USE_CROSS_COMPILE / **/
-#define PERL_TARGETARCH "" /**/
-#endif
-
-/* MEM_ALIGNBYTES:
- * This symbol contains the number of bytes required to align a
- * double, or a long double when applicable. Usual values are 2,
- * 4 and 8. The default is eight, for safety.
- */
-#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
-# define MEM_ALIGNBYTES 8
-#else
-#define MEM_ALIGNBYTES 8
-#endif
-
-/* BYTEORDER:
- * This symbol holds the hexadecimal constant defined in byteorder,
- * in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
- * If the compiler supports cross-compiling or multiple-architecture
- * binaries (eg. on NeXT systems), use compiler-defined macros to
- * determine the byte order.
- * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
- * Binaries (MAB) on either big endian or little endian machines.
- * The endian-ness is available at compile-time. This only matters
- * for perl, where the config.h can be generated and installed on
- * one system, and used by a different architecture to build an
- * extension. Older versions of NeXT that might not have
- * defined either *_ENDIAN__ were all on Motorola 680x0 series,
- * so the default case (for NeXT) is big endian to catch them.
- * This might matter for NeXT 3.0.
- */
-#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
-# ifdef __LITTLE_ENDIAN__
-# if LONGSIZE == 4
-# define BYTEORDER 0x1234
-# else
-# if LONGSIZE == 8
-# define BYTEORDER 0x12345678
-# endif
-# endif
-# else
-# ifdef __BIG_ENDIAN__
-# if LONGSIZE == 4
-# define BYTEORDER 0x4321
-# else
-# if LONGSIZE == 8
-# define BYTEORDER 0x87654321
-# endif
-# endif
-# endif
-# endif
-# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
-# define BYTEORDER 0x4321
-# endif
-#else
-#define BYTEORDER 0x1234 /* large digits for MSB */
-#endif /* NeXT */
-
-/* CHARBITS:
- * This symbol contains the size of a char, so that the C preprocessor
- * can make decisions based on it.
- */
-#define CHARBITS 8 /**/
-
-/* CASTI32:
- * This symbol is defined if the C compiler can cast negative
- * or large floating point numbers to 32-bit ints.
- */
-#ifndef _MSC_VER
-# define CASTI32 /**/
-#endif
-
-/* CASTNEGFLOAT:
- * This symbol is defined if the C compiler can cast negative
- * numbers to unsigned longs, ints and shorts.
- */
-/* CASTFLAGS:
- * This symbol contains flags that say what difficulties the compiler
- * has casting odd floating values to unsigned long:
- * 0 = ok
- * 1 = couldn't cast < 0
- * 2 = couldn't cast >= 0x80000000
- * 4 = couldn't cast in argument expression list
- */
-#define CASTNEGFLOAT /**/
-#define CASTFLAGS 0 /**/
-
-/* VOID_CLOSEDIR:
- * This symbol, if defined, indicates that the closedir() routine
- * does not return a value.
- */
-/*#define VOID_CLOSEDIR / **/
-
-/* HAS_FD_SET:
- * This symbol, when defined, indicates presence of the fd_set typedef
- * in <sys/types.h>
- */
-#define HAS_FD_SET /**/
-
-/* Gconvert:
- * This preprocessor macro is defined to convert a floating point
- * number to a string without a trailing decimal point. This
- * emulates the behavior of sprintf("%g"), but is sometimes much more
- * efficient. If gconvert() is not available, but gcvt() drops the
- * trailing decimal point, then gcvt() is used. If all else fails,
- * a macro using sprintf("%g") is used. Arguments for the Gconvert
- * macro are: value, number of digits, whether trailing zeros should
- * be retained, and the output buffer.
- * The usual values are:
- * d_Gconvert='gconvert((x),(n),(t),(b))'
- * d_Gconvert='gcvt((x),(n),(b))'
- * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- * The last two assume trailing zeros should not be kept.
- */
-#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
-
-/* HAS_GETPAGESIZE:
- * This symbol, if defined, indicates that the getpagesize system call
- * is available to get system page size, which is the granularity of
- * many memory management calls.
- */
-/*#define HAS_GETPAGESIZE / **/
-
-/* HAS_GNULIBC:
- * This symbol, if defined, indicates to the C program that
- * the GNU C library is being used. A better check is to use
- * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
- */
-/*#define HAS_GNULIBC / **/
-#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
-# define _GNU_SOURCE
-#endif
-
-/* HAS_ISASCII:
- * This manifest constant lets the C program know that isascii
- * is available.
- */
-#define HAS_ISASCII /**/
-
-/* HAS_LCHOWN:
- * This symbol, if defined, indicates that the lchown routine is
- * available to operate on a symbolic link (instead of following the
- * link).
- */
-/*#define HAS_LCHOWN / **/
-
-/* HAS_OPEN3:
- * This manifest constant lets the C program know that the three
- * argument form of open(2) is available.
- */
-/*#define HAS_OPEN3 / **/
-
-/* HAS_SAFE_BCOPY:
- * This symbol, if defined, indicates that the bcopy routine is available
- * to copy potentially overlapping memory blocks. Normally, you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
- */
-/*#define HAS_SAFE_BCOPY / **/
-
-/* HAS_SAFE_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy potentially overlapping memory blocks. If you need to
- * copy overlapping memory blocks, you should check HAS_MEMMOVE and
- * use memmove() instead, if available.
- */
-/*#define HAS_SAFE_MEMCPY / **/
-
-/* HAS_SANE_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * and can be used to compare relative magnitudes of chars with their high
- * bits set. If it is not defined, roll your own version.
- */
-#define HAS_SANE_MEMCMP /**/
-
-/* HAS_SIGACTION:
- * This symbol, if defined, indicates that Vr4's sigaction() routine
- * is available.
- */
-/*#define HAS_SIGACTION / **/
-
-/* HAS_SIGSETJMP:
- * This variable indicates to the C program that the sigsetjmp()
- * routine is available to save the calling process's registers
- * and stack environment for later use by siglongjmp(), and
- * to optionally save the process's signal mask. See
- * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
- */
-/* Sigjmp_buf:
- * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
- */
-/* Sigsetjmp:
- * This macro is used in the same way as sigsetjmp(), but will invoke
- * traditional setjmp() if sigsetjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-/* Siglongjmp:
- * This macro is used in the same way as siglongjmp(), but will invoke
- * traditional longjmp() if siglongjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-/*#define HAS_SIGSETJMP / **/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
-
-/* HAS_STATIC_INLINE:
- * This symbol, if defined, indicates that the C compiler supports
- * C99-style static inline. That is, the function can't be called
- * from another translation unit.
- */
-/* PERL_STATIC_INLINE:
- * This symbol gives the best-guess incantation to use for static
- * inline functions. If HAS_STATIC_INLINE is defined, this will
- * give C99-style inline. If HAS_STATIC_INLINE is not defined,
- * this will give a plain 'static'. It will always be defined
- * to something that gives static linkage.
- * Possibilities include
- * static inline (c99)
- * static __inline__ (gcc -ansi)
- * static __inline (MSVC)
- * static _inline (older MSVC)
- * static (c89 compilers)
- */
-#define HAS_STATIC_INLINE /**/
-#ifndef _MSC_VER
-# define PERL_STATIC_INLINE static __inline__ /**/
-#else
-# define PERL_STATIC_INLINE static __inline /**/
-#endif
-
-/* USE_STDIO_PTR:
- * This symbol is defined if the _ptr and _cnt fields (or similar)
- * of the stdio FILE structure can be used to access the stdio buffer
- * for a file handle. If this is defined, then the FILE_ptr(fp)
- * and FILE_cnt(fp) macros will also be defined and should be used
- * to access these fields.
- */
-/* FILE_ptr:
- * This macro is used to access the _ptr field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_PTR_LVALUE:
- * This symbol is defined if the FILE_ptr macro can be used as an
- * lvalue.
- */
-/* FILE_cnt:
- * This macro is used to access the _cnt field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_CNT_LVALUE:
- * This symbol is defined if the FILE_cnt macro can be used as an
- * lvalue.
- */
-/* STDIO_PTR_LVAL_SETS_CNT:
- * This symbol is defined if using the FILE_ptr macro as an lvalue
- * to increase the pointer by n has the side effect of decreasing the
- * value of File_cnt(fp) by n.
- */
-/* STDIO_PTR_LVAL_NOCHANGE_CNT:
- * This symbol is defined if using the FILE_ptr macro as an lvalue
- * to increase the pointer by n leaves File_cnt(fp) unchanged.
- */
-#define USE_STDIO_PTR /**/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp) ((fp)->_ptr)
-#define STDIO_PTR_LVALUE /**/
-#define FILE_cnt(fp) ((fp)->_cnt)
-#define STDIO_CNT_LVALUE /**/
-/*#define STDIO_PTR_LVAL_SETS_CNT / **/
-#define STDIO_PTR_LVAL_NOCHANGE_CNT /**/
-#endif
-
-/* USE_STDIO_BASE:
- * This symbol is defined if the _base field (or similar) of the
- * stdio FILE structure can be used to access the stdio buffer for
- * a file handle. If this is defined, then the FILE_base(fp) macro
- * will also be defined and should be used to access this field.
- * Also, the FILE_bufsiz(fp) macro will be defined and should be used
- * to determine the number of bytes in the buffer. USE_STDIO_BASE
- * will never be defined unless USE_STDIO_PTR is.
- */
-/* FILE_base:
- * This macro is used to access the _base field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_BASE is defined.
- */
-/* FILE_bufsiz:
- * This macro is used to determine the number of bytes in the I/O
- * buffer pointed to by _base field (or equivalent) of the FILE
- * structure pointed to its argument. This macro will always be defined
- * if USE_STDIO_BASE is defined.
- */
-#define USE_STDIO_BASE /**/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp) ((fp)->_base)
-#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
-#endif
-
-/* HAS_VPRINTF:
- * This symbol, if defined, indicates that the vprintf routine is available
- * to printf with a pointer to an argument list. If unavailable, you
- * may need to write your own, probably in terms of _doprnt().
- */
-/* USE_CHAR_VSPRINTF:
- * This symbol is defined if this system has vsprintf() returning type
- * (char*). The trend seems to be to declare it as "int vsprintf()". It
- * is up to the package author to declare vsprintf correctly based on the
- * symbol.
- */
-#define HAS_VPRINTF /**/
-/*#define USE_CHAR_VSPRINTF / **/
-
-/* DOUBLESIZE:
- * This symbol contains the size of a double, so that the C preprocessor
- * can make decisions based on it.
- */
-#define DOUBLESIZE 8 /**/
-
-/* I_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <time.h>.
- */
-/* I_SYS_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h>.
- */
-/* I_SYS_TIME_KERNEL:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h> with KERNEL defined.
- */
-/* HAS_TM_TM_ZONE:
- * This symbol, if defined, indicates to the C program that
- * the struct tm has a tm_zone field.
- */
-/* HAS_TM_TM_GMTOFF:
- * This symbol, if defined, indicates to the C program that
- * the struct tm has a tm_gmtoff field.
- */
-#define I_TIME /**/
-/*#define I_SYS_TIME / **/
-/*#define I_SYS_TIME_KERNEL / **/
-/*#define HAS_TM_TM_ZONE / **/
-/*#define HAS_TM_TM_GMTOFF / **/
-
-/* VAL_O_NONBLOCK:
- * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- * non-blocking I/O for the file descriptor. Note that there is no way
- * back, i.e. you cannot turn it blocking again this way. If you wish to
- * alternatively switch between blocking and non-blocking, use the
- * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
- */
-/* VAL_EAGAIN:
- * This symbol holds the errno error code set by read() when no data was
- * present on the non-blocking file descriptor.
- */
-/* RD_NODATA:
- * This symbol holds the return code from read() when no data is present
- * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- * not defined, then you can't distinguish between no data and EOF by
- * issuing a read(). You'll have to find another way to tell for sure!
- */
-/* EOF_NONBLOCK:
- * This symbol, if defined, indicates to the C program that a read() on
- * a non-blocking file descriptor will return 0 on EOF, and not the value
- * held in RD_NODATA (-1 usually, in that case!).
- */
-#define VAL_O_NONBLOCK O_NONBLOCK
-#define VAL_EAGAIN EAGAIN
-#define RD_NODATA -1
-#define EOF_NONBLOCK
+#define _(args) ()
+#endif
/* PTRSIZE:
* This symbol contains the size of a pointer, so that the C preprocessor
*/
#define PTRSIZE 4 /**/
+/* HAS_QUAD:
+ * This symbol, if defined, tells that there's a 64-bit integer type,
+ * Quad_t, and its unsigned counterpart, Uquad_t. QUADKIND will be one
+ * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, QUAD_IS_INT64_T,
+ * or QUAD_IS___INT64.
+ */
+#define HAS_QUAD /**/
+#ifdef HAS_QUAD
+# define Quad_t long long /**/
+# define Uquad_t unsigned long long /**/
+# define QUADKIND 3 /**/
+# define QUAD_IS_INT 1
+# define QUAD_IS_LONG 2
+# define QUAD_IS_LONG_LONG 3
+# define QUAD_IS_INT64_T 4
+# define QUAD_IS___INT64 5
+#endif
+
/* Drand01:
* This macro is to be used to generate uniformly distributed
* random numbers over the range [0., 1.[. You may have to supply
* function used to generate normalized random numbers.
* Values include 15, 16, 31, and 48.
*/
-#define Drand01() (rand()/(double)((unsigned)1<<RANDBITS)) /**/
-#define Rand_seed_t unsigned /**/
-#define seedDrand01(x) srand((Rand_seed_t)x) /**/
-#define RANDBITS 15 /**/
+#define Drand01() Perl_drand48() /**/
+#define Rand_seed_t U32 /**/
+#define seedDrand01(x) Perl_drand48_init((Rand_seed_t)x) /**/
+#define RANDBITS 48 /**/
+
+/* Select_fd_set_t:
+ * This symbol holds the type used for the 2nd, 3rd, and 4th
+ * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
+ * is defined, and 'int *' otherwise. This is only useful if you
+ * have select(), of course.
+ */
+#define Select_fd_set_t Perl_fd_set * /**/
+
+/* SH_PATH:
+ * This symbol contains the full pathname to the shell used on this
+ * on this system to execute Bourne shell scripts. Usually, this will be
+ * /bin/sh, though it's possible that some systems will have /bin/ksh,
+ * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
+ * D:/bin/sh.exe.
+ */
+#define SH_PATH "cmd /x /c" /**/
+
+/* SIG_NAME:
+ * This symbol contains a list of signal names in order of
+ * signal number. This is intended
+ * to be used as a static array initialization, like this:
+ * char *sig_name[] = { SIG_NAME };
+ * The signals in the list are separated with commas, and each signal
+ * is surrounded by double quotes. There is no leading SIG in the signal
+ * name, i.e. SIGQUIT is known as "QUIT".
+ * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ * etc., where nn is the actual signal number (e.g. NUM37).
+ * The signal number for sig_name[i] is stored in sig_num[i].
+ * The last element is 0 to terminate the list with a NULL. This
+ * corresponds to the 0 at the end of the sig_name_init list.
+ * Note that this variable is initialized from the sig_name_init,
+ * not from sig_name (which is unused).
+ */
+/* SIG_NUM:
+ * This symbol contains a list of signal numbers, in the same order as the
+ * SIG_NAME list. It is suitable for static array initialization, as in:
+ * int sig_num[] = { SIG_NUM };
+ * The signals in the list are separated with commas, and the indices
+ * within that list and the SIG_NAME list match, so it's easy to compute
+ * the signal name from a number or vice versa at the price of a small
+ * dynamic linear lookup.
+ * Duplicates are allowed, but are moved to the end of the list.
+ * The signal number corresponding to sig_name[i] is sig_number[i].
+ * if (i < NSIG) then sig_number[i] == i.
+ * The last element is 0, corresponding to the 0 at the end of
+ * the sig_name_init list.
+ * Note that this variable is initialized from the sig_num_init,
+ * not from sig_num (which is unused).
+ */
+/* SIG_SIZE:
+ * This variable contains the number of elements of the SIG_NAME
+ * and SIG_NUM arrays, excluding the final NULL entry.
+ */
+#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "NUM16", "NUM17", "NUM18", "NUM19", "CHLD", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0 /**/
+#define SIG_NUM 0, 1, 2, 21, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0 /**/
+#define SIG_SIZE 27 /**/
+
+/* SITEARCH:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-dependent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
+ */
+/* SITEARCH_EXP:
+ * This symbol contains the ~name expanded version of SITEARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITEARCH "c:\\perl\\site\\lib" /**/
+/*#define SITEARCH_EXP "" / **/
+
+/* SITELIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-independent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
+ */
+/* SITELIB_EXP:
+ * This symbol contains the ~name expanded version of SITELIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/* SITELIB_STEM:
+ * This define is SITELIB_EXP with any trailing version-specific component
+ * removed. The elements in inc_version_list (inc_version_list.U) can
+ * be tacked onto this variable to generate a list of directories to search.
+ */
+#define SITELIB "c:\\perl\\site\\lib" /**/
+#define SITELIB_EXP (win32_get_sitelib(PERL_VERSION_STRING, NULL)) /**/
+#define SITELIB_STEM "" /**/
+
+/* Size_t_size:
+ * This symbol holds the size of a Size_t in bytes.
+ */
+#define Size_t_size 4 /**/
+
+/* Size_t:
+ * This symbol holds the type used to declare length parameters
+ * for string functions. It is usually size_t, but may be
+ * unsigned long, int, etc. It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Size_t size_t /* length parameter for string functions */
+
+/* Sock_size_t:
+ * This symbol holds the type used for the size argument of
+ * various socket calls (just the base type, not the pointer-to).
+ */
+#define Sock_size_t int /**/
/* SSize_t:
* This symbol holds the type used by functions that return
*/
#define SSize_t int /* signed count of bytes */
-/* EBCDIC:
- * This symbol, if defined, indicates that this system uses
- * EBCDIC encoding.
+/* STDCHAR:
+ * This symbol is defined to be the type of char used in stdio.h.
+ * It has the values "unsigned char" or "char".
*/
-/*#define EBCDIC / **/
+#define STDCHAR char /**/
-/* SETUID_SCRIPTS_ARE_SECURE_NOW:
- * This symbol, if defined, indicates that the bug that prevents
- * setuid scripts from being secure is not present in this kernel.
+/* Uid_t_f:
+ * This symbol defines the format string used for printing a Uid_t.
*/
-/* DOSUID:
- * This symbol, if defined, indicates that the C program should
- * check the script that it is executing for setuid/setgid bits, and
- * attempt to emulate setuid/setgid on systems that have disabled
- * setuid #! scripts because the kernel can't do it securely.
- * It is up to the package designer to make sure that this emulation
- * is done securely. Among other things, it should do an fstat on
- * the script it just opened to make sure it really is a setuid/setgid
- * script, it should make sure the arguments passed correspond exactly
- * to the argument on the #! line, and it should not trust any
- * subprocesses to which it must pass the filename rather than the
- * file descriptor of the script to be executed.
+#define Uid_t_f "ld" /**/
+
+/* Uid_t_sign:
+ * This symbol holds the signedness of a Uid_t.
+ * 1 for unsigned, -1 for signed.
*/
-/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
-/*#define DOSUID / **/
+#define Uid_t_sign -1 /* UID sign */
+
+/* Uid_t_size:
+ * This symbol holds the size of a Uid_t in bytes.
+ */
+#define Uid_t_size 4 /* UID size */
+
+/* Uid_t:
+ * This symbol holds the type used to declare user ids in the kernel.
+ * It can be int, ushort, uid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Uid_t uid_t /* UID type */
+
+/* USE_ITHREADS:
+ * This symbol, if defined, indicates that Perl should be built to
+ * use the interpreter-based threading implementation.
+ */
+/* USE_5005THREADS:
+ * This symbol, if defined, indicates that Perl should be built to
+ * use the 5.005-based threading implementation.
+ * Only valid up to 5.8.x.
+ */
+/* OLD_PTHREADS_API:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use the old draft POSIX threads API.
+ */
+/* USE_REENTRANT_API:
+ * This symbol, if defined, indicates that Perl should
+ * try to use the various _r versions of library functions.
+ * This is extremely experimental.
+ */
+/*#define USE_5005THREADS / **/
+/*#define USE_ITHREADS / **/
+#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
+#define USE_THREADS /* until src is revised*/
+#endif
+/*#define OLD_PTHREADS_API / **/
+/*#define USE_REENTRANT_API / **/
+
+/* PERL_VENDORARCH:
+ * If defined, this symbol contains the name of a private library.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world.
+ * It may have a ~ on the front.
+ * The standard distribution will put nothing in this directory.
+ * Vendors who distribute perl may wish to place their own
+ * architecture-dependent modules and extensions in this directory with
+ * MakeMaker Makefile.PL INSTALLDIRS=vendor
+ * or equivalent. See INSTALL for details.
+ */
+/* PERL_VENDORARCH_EXP:
+ * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/*#define PERL_VENDORARCH "" / **/
+/*#define PERL_VENDORARCH_EXP "" / **/
+
+/* PERL_VENDORLIB_EXP:
+ * This symbol contains the ~name expanded version of VENDORLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/* PERL_VENDORLIB_STEM:
+ * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
+ * removed. The elements in inc_version_list (inc_version_list.U) can
+ * be tacked onto this variable to generate a list of directories to search.
+ */
+/*#define PERL_VENDORLIB_EXP "" / **/
+/*#define PERL_VENDORLIB_STEM "" / **/
/* PERL_USE_DEVEL:
* This symbol, if defined, indicates that Perl was configured with
/* HAS_GETESPWNAM:
* This symbol, if defined, indicates that the getespwnam system call is
- * available to retrieve enchanced (shadow) password entries by name.
+ * available to retrieve enhanced (shadow) password entries by name.
*/
/*#define HAS_GETESPWNAM / **/
*/
/*#define HAS_INT64_T / **/
+/* HAS_ISBLANK:
+ * This manifest constant lets the C program know that isblank
+ * is available.
+ */
+/*#define HAS_ISBLANK / **/
+
/* HAS_ISFINITE:
* This symbol, if defined, indicates that the isfinite routine is
* available to check whether a double is finite (non-infinity non-NaN).
/* HAS_MKSTEMPS:
* This symbol, if defined, indicates that the mkstemps routine is
- * available to excluslvely create and open a uniquely named
+ * available to exclusively create and open a uniquely named
* (with a suffix) temporary file.
*/
/*#define HAS_MKSTEMPS / **/
*/
/*#define HAS_OFF64_T / **/
+/* HAS_PRCTL:
+ * This symbol, if defined, indicates that the prctl routine is
+ * available to set process title.
+ */
+/* HAS_PRCTL_SET_NAME:
+ * This symbol, if defined, indicates that the prctl routine is
+ * available to set process title and supports PR_SET_NAME.
+ */
+/*#define HAS_PRCTL / **/
+/*#define HAS_PRCTL_SET_NAME / **/
+
/* HAS_PROCSELFEXE:
* This symbol is defined if PROCSELFEXE_PATH is a symlink
* to the absolute pathname of the executing program.
*/
/*#define HAS_SETPROCTITLE / **/
-/* USE_SFIO:
- * This symbol, if defined, indicates that sfio should
- * be used.
- */
-/*#define USE_SFIO / **/
-
/* HAS_SIGNBIT:
* This symbol, if defined, indicates that the signbit routine is
* available to check if the given number has the sign bit set.
#define USE_DYNAMIC_LOADING /**/
/* FFLUSH_NULL:
- * This symbol, if defined, tells that fflush(NULL) does flush
- * all pending stdio output.
+ * This symbol, if defined, tells that fflush(NULL) correctly
+ * flushes all pending stdio output without side effects. In
+ * particular, on some platforms calling fflush(NULL) *still*
+ * corrupts STDIN if it is a pipe.
*/
/* FFLUSH_ALL:
* This symbol, if defined, tells that to flush
*/
/*#define I_SOCKS / **/
+/* I_STDBOOL:
+ * This symbol, if defined, indicates that <stdbool.h> exists and
+ * can be included.
+ */
+#define I_STDBOOL /**/
+
/* I_SUNMATH:
* This symbol, if defined, indicates that <sunmath.h> exists and
* should be included.
/*#define PERL_PRIeldbl "e" / **/
/*#define PERL_SCNfldbl "f" / **/
-/* PERL_MAD:
- * This symbol, if defined, indicates that the Misc Attribution
- * Declaration code should be conditionally compiled.
- */
-/*#define PERL_MAD / **/
-
/* NEED_VA_COPY:
* This symbol, if defined, indicates that the system stores
* the variable argument list datatype, va_list, in a format
/* NV_OVERFLOWS_INTEGERS_AT:
* This symbol gives the largest integer value that NVs can hold. This
* value + 1.0 cannot be stored accurately. It is expressed as constant
- * floating point expression to reduce the chance of decimale/binary
+ * floating point expression to reduce the chance of decimal/binary
* conversion issues. If it can not be determined, the value 0 is given.
*/
/* NV_ZERO_IS_ALLBITS_ZERO:
#define I32TYPE long /**/
#define U32TYPE unsigned long /**/
#ifdef HAS_QUAD
-# ifndef _MSC_VER
-# define I64TYPE long long /**/
-# define U64TYPE unsigned long long /**/
-# else
-# define I64TYPE __int64 /**/
-# define U64TYPE unsigned __int64 /**/
-# endif
+#define I64TYPE long long /**/
+#define U64TYPE unsigned long long /**/
#endif
#define NVTYPE double /**/
#define IVSIZE 4 /**/
*/
#define SELECT_MIN_BITS 32 /**/
+/* ST_INO_SIZE:
+ * This variable contains the size of struct stat's st_ino in bytes.
+ */
+/* ST_INO_SIGN:
+ * This symbol holds the signedness of struct stat's st_ino.
+ * 1 for unsigned, -1 for signed.
+ */
+#define ST_INO_SIGN 1 /* st_ino sign */
+#define ST_INO_SIZE 4 /* st_ino size */
+
/* STARTPERL:
* This variable contains the string to put in front of a perl
* script to make sure (one hopes) that it runs with perl and not
* This symbol contains the minimum value for the time_t offset that
* the system function localtime () accepts, and defaults to 0
*/
-#define GMTIME_MAX 2147483647 /**/
-#define GMTIME_MIN 0 /**/
+#define GMTIME_MAX 2147483647 /**/
+#define GMTIME_MIN 0 /**/
#define LOCALTIME_MAX 2147483647 /**/
#define LOCALTIME_MIN 0 /**/
/*#define USE_FAST_STDIO / **/
#endif
+/* USE_KERN_PROC_PATHNAME:
+ * This symbol, if defined, indicates that we can use sysctl with
+ * KERN_PROC_PATHNAME to get a full path for the executable, and hence
+ * convert $^X to an absolute path.
+ */
+/*#define USE_KERN_PROC_PATHNAME / **/
+
/* USE_LARGE_FILES:
* This symbol, if defined, indicates that large file support
* should be used when available.
/*#define MULTIPLICITY / **/
#endif
+/* USE_NSGETEXECUTABLEPATH:
+ * This symbol, if defined, indicates that we can use _NSGetExecutablePath
+ * and realpath to get a full path for the executable, and hence convert
+ * $^X to an absolute path.
+ */
+/*#define USE_NSGETEXECUTABLEPATH / **/
+
/* USE_PERLIO:
* This symbol, if defined, indicates that the PerlIO abstraction should
* be used throughout. If not defined, stdio should be