*/
#$d_getgrps HAS_GETGROUPS /**/
-/* HAS_GETHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * gethostname() routine to derive the host name. See also HAS_UNAME
- * and PHOSTNAME.
- */
-/* HAS_UNAME:
- * This symbol, if defined, indicates that the C program may use the
- * uname() routine to derive the host name. See also HAS_GETHOSTNAME
- * and PHOSTNAME.
- */
-/* PHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * contents of PHOSTNAME as a command to feed to the popen() routine
- * to derive the host name. See also HAS_GETHOSTNAME and HAS_UNAME.
- * Note that the command uses a fully qualified path, so that it is safe
- * even if used by a process with super-user privileges.
- */
-#$d_gethname HAS_GETHOSTNAME /**/
-#$d_uname HAS_UNAME /**/
-#$d_phostname PHOSTNAME "$aphostname" /* How to get the host name */
-
/* HAS_GETLOGIN:
* This symbol, if defined, indicates that the getlogin routine is
* available to get the login name.
*/
#$d_mktime HAS_MKTIME /**/
+/* HAS_MSYNC:
+ * This symbol, if defined, indicates that the msync system call is
+ * available to synchronize a mapped file.
+ */
+#$d_msync HAS_MSYNC /**/
+
+/* HAS_MUNMAP:
+ * This symbol, if defined, indicates that the munmap system call is
+ * available to unmap a region, usually mapped by mmap().
+ */
+#$d_munmap HAS_MUNMAP /**/
+
/* HAS_NICE:
* This symbol, if defined, indicates that the nice routine is
* available.
/* HAS_SHMAT_PROTOTYPE:
* This symbol, if defined, indicates that the sys/shm.h includes
* a prototype for shmat(). Otherwise, it is up to the program to
- * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
+ * guess one. Shmat_t shmat (int, Shmat_t, int) is a good guess,
* but not always right so it should be emitted by the program only
* when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
*/
*/
#$d_umask HAS_UMASK /**/
-/* HAS_VFORK:
- * This symbol, if defined, indicates that vfork() exists.
- */
-#$d_vfork HAS_VFORK /**/
-
/* HASVOLATILE:
* This symbol, if defined, indicates that this C compiler knows about
* the volatile declaration.
*/
#$i_syssecrt I_SYS_SECURITY /**/
+/* CROSSCOMPILE:
+ * This symbol, if defined, signifies that we our
+ * build process is a cross-compilation.
+ */
+#$crosscompile CROSSCOMPILE /**/
+
+/* INTSIZE:
+ * This symbol contains the value of sizeof(int) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* LONGSIZE:
+ * This symbol contains the value of sizeof(long) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* SHORTSIZE:
+ * This symbol contains the value of sizeof(short) so that the C
+ * preprocessor can make decisions based on it.
+ */
+#define INTSIZE $intsize /**/
+#define LONGSIZE $longsize /**/
+#define SHORTSIZE $shortsize /**/
+
+/* MULTIARCH:
+ * This symbol, if defined, signifies that the build
+ * process will produce some binary files that are going to be
+ * used in a cross-platform environment. This is the case for
+ * example with the NeXT "fat" binaries that contain executables
+ * for several CPUs.
+ */
+#$multiarch MULTIARCH /**/
+
/* MEM_ALIGNBYTES:
- * This symbol contains the number of bytes required to align a
- * double. Usual values are 2, 4 and 8.
- * On NeXT starting with 3.2, you can build "Fat" Multiple Architecture
- * Binaries (MAB) for targets with varying alignment. This only matters
- * for perl, where the config.h can be generated and installed on one
- * system, and used by a different architecture to build an extension.
- * The default is eight, for safety.
+ * This symbol contains the number of bytes required to align a
+ * double. Usual values are 2, 4 and 8. The default is eight,
+ * for safety.
*/
-#define MEM_ALIGNBYTES $alignbytes /**/
+#if defined(CROSSCOMPILE) || defined(MULTIARCH)
+# define MEM_ALIGNBYTES 8
+#else
+#define MEM_ALIGNBYTES $alignbytes
+#endif
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
* i.e. 0x1234 or 0x4321, etc...
+ * If the compiler supports cross-compiling or multiple-architecture
+ * binaries (eg. on NeXT systems), use compiler-defined macros to
+ * determine the byte order.
* On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
* Binaries (MAB) on either big endian or little endian machines.
* The endian-ness is available at compile-time. This only matters
* so the default case (for NeXT) is big endian to catch them.
* This might matter for NeXT 3.0.
*/
-#ifndef NeXT
+#if defined(CROSSCOMPILE) || defined(MULTIARCH)
+# ifdef __LITTLE_ENDIAN__
+# if LONGSIZE == 4
+# define BYTEORDER 0x1234
+# else
+# if LONGSIZE == 8
+# define BYTEORDER 0x12345678
+# endif
+# endif
+# else
+# ifdef __BIG_ENDIAN__
+# if LONGSIZE == 4
+# define BYTEORDER 0x4321
+# else
+# if LONGSIZE == 8
+# define BYTEORDER 0x87654321
+# endif
+# endif
+# endif
+# endif
+# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
+# define BYTEORDER 0x4321
+# endif
+#else
#define BYTEORDER 0x$byteorder /* large digits for MSB */
-#else /* NeXT */
-#ifdef __LITTLE_ENDIAN__
-#define BYTEORDER 0x1234
-#else /* __BIG_ENDIAN__ */
-#define BYTEORDER 0x4321
-#endif /* ENDIAN CHECK */
#endif /* NeXT */
/* CASTI32:
#$i_systime I_SYS_TIME /**/
#$i_systimek I_SYS_TIME_KERNEL /**/
-/* INTSIZE:
- * This symbol contains the value of sizeof(int) so that the C
- * preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- * This symbol contains the value of sizeof(long) so that the C
- * preprocessor can make decisions based on it.
- */
-/* SHORTSIZE:
- * This symbol contains the value of sizeof(short) so that the C
- * preprocessor can make decisions based on it.
- */
-#define INTSIZE $intsize /**/
-#define LONGSIZE $longsize /**/
-#define SHORTSIZE $shortsize /**/
-
/* VAL_O_NONBLOCK:
* This symbol is to be used during open() or fcntl(F_SETFL) to turn on
* non-blocking I/O for the file descriptor. Note that there is no way
*/
#$d_gethent HAS_GETHOSTENT /**/
+/* HAS_GETHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * gethostname() routine to derive the host name. See also HAS_UNAME
+ * and PHOSTNAME.
+ */
+/* HAS_UNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * uname() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and PHOSTNAME.
+ */
+/* PHOSTNAME:
+ * This symbol, if defined, indicates the command to feed to the
+ * popen() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and HAS_UNAME. Note that the command uses a fully qualified path,
+ * so that it is safe even if used by a process with super-user
+ * privileges.
+ */
+#$d_gethname HAS_GETHOSTNAME /**/
+#$d_uname HAS_UNAME /**/
+#$d_phostname HAS_PHOSTNAME
+#ifdef HAS_PHOSTNAME
+#define PHOSTNAME "$aphostname" /* How to get the host name */
+#endif
+
/* HAS_GETNETBYADDR:
* This symbol, if defined, indicates that the getnetbyaddr() routine is
* available to look up networks by their IP addresses.
#define LONGLONGSIZE $longlongsize /**/
#endif
+/* HAS_MEMCHR:
+ * This symbol, if defined, indicates that the memchr routine is available
+ * to locate characters within a C string.
+ */
+#$d_memchr HAS_MEMCHR /**/
+
+/* HAS_MMAP:
+ * This symbol, if defined, indicates that the mmap system call is
+ * available to map a file into memory.
+ */
+/* Mmap_t:
+ * This symbol holds the return type of the mmap() system call
+ * (and simultaneously the type of the first argument).
+ * Usually set to 'void *' or 'cadd_t'.
+ */
+#$d_mmap HAS_MMAP /**/
+#define Mmap_t $mmaptype /**/
+
/* HAS_MSG:
* This symbol, if defined, indicates that the entire msg*(2) library is
* supported (IPC mechanism based on message queues).
* This symbol, if defined, indicates that the BSD socketpair() call is
* supported.
*/
-#$d_socket HAS_SOCKET /**/
-#$d_sockpair HAS_SOCKETPAIR /**/
+/* HAS_MSG_CTRUNC:
+ * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_DONTROUTE:
+ * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_OOB:
+ * This symbol, if defined, indicates that the MSG_OOB is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_PEEK:
+ * This symbol, if defined, indicates that the MSG_PEEK is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_PROXY:
+ * This symbol, if defined, indicates that the MSG_PROXY is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_SCM_RIGHTS:
+ * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_SENDMSG:
+ * This symbol, if defined, indicates that the sendmsg is supported
+ * to send messages between sockets. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+/* HAS_RECVMSG:
+ * This symbol, if defined, indicates that the recvmsg is supported
+ * to send messages between sockets. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+/* HAS_STRUCT_MSGHDR:
+ * This symbol, if defined, indicates that the struct msghdr
+ * (BSD 4.3 or 4.4) is supported. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+/* HAS_STRUCT_CMSGHDR:
+ * This symbol, if defined, indicates that the struct cmsghdr
+ * (BSD 4.4) is supported. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+#$d_socket HAS_SOCKET /**/
+#$d_sockpair HAS_SOCKETPAIR /**/
+#$d_msg_ctrunc HAS_MSG_CTRUNC /**/
+#$d_msg_dontroute HAS_MSG_DONTROUTE /**/
+#$d_msg_oob HAS_MSG_OOB /**/
+#$d_msg_peek HAS_MSG_PEEK /**/
+#$d_msg_proxy HAS_MSG_PROXY /**/
+#$d_scm_rights HAS_SCM_RIGHTS /**/
+#$d_sendmsg HAS_SENDMSG /**/
+#$d_recvmsg HAS_RECVMSG /**/
+#$d_msghdr_s HAS_STRUCT_MSGHDR /**/
+#$d_cmsghdr_s HAS_STRUCT_CMSGHDR /**/
/* USE_STAT_BLOCKS:
* This symbol is defined if this system has a stat structure declaring
#$d_semctl_semun USE_SEMCTL_SEMUN /**/
#$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/
+/* HAS_VFORK:
+ * This symbol, if defined, indicates that vfork() exists.
+ */
+#$d_vfork HAS_VFORK /**/
+
/* Signal_t:
* This symbol's value is either "void" or "int", corresponding to the
* appropriate return type of a signal handler. Thus, you can declare
#$d_pwgecos PWGECOS /**/
#$d_pwpasswd PWPASSWD /**/
+/* I_SYSUIO:
+ * This symbol, if defined, indicates that <sys/uio.h> exists and
+ * should be included.
+ */
+#$i_sysuio I_SYSUIO /**/
+
/* Free_t:
* This variable contains the return type of free(). It is usually
* void, but occasionally int.
*/
#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/
+/* HAS_ENDSPENT:
+ * This symbol, if defined, indicates that the endspent system call is
+ * available to finalize the scan of SysV shadow password entries.
+ */
+#$d_endspent HAS_ENDSPENT /**/
+
/* HAS_FSEEKO:
* This symbol, if defined, indicates that the fseeko routine is
* available to fseek beyond 32 bits (useful for ILP32 hosts).
*/
#$d_ftello HAS_FTELLO /**/
+/* HAS_GETMNTENT:
+ * This symbol, if defined, indicates that the getmntent routine is
+ * available to iterate through mounted file systems.
+ */
+#$d_getmntent HAS_GETMNTENT /**/
+
+/* HAS_GETSPENT:
+ * This symbol, if defined, indicates that the getspent system call is
+ * available to retrieve SysV shadow password entries sequentially.
+ */
+#$d_getspent HAS_GETSPENT /**/
+
+/* HAS_GETSPNAM:
+ * This symbol, if defined, indicates that the getspnam system call is
+ * available to retrieve SysV shadow password entries by name.
+ */
+#$d_getspnam HAS_GETSPNAM /**/
+
+/* HAS_HASMNTOPT:
+ * This symbol, if defined, indicates that the hasmntopt routine is
+ * available to query the mount options of file systems.
+ */
+#$d_hasmntopt HAS_HASMNTOPT /**/
+
+/* HAS_MADVISE:
+ * This symbol, if defined, indicates that the madvise system call is
+ * available to map a file into memory.
+ */
+#$d_madvise HAS_MADVISE /**/
+
+/* HAS_MPROTECT:
+ * This symbol, if defined, indicates that the mprotect system call is
+ * available to modify the access protection of a memory mapped file.
+ */
+#$d_mprotect HAS_MPROTECT /**/
+
+/* HAS_READV:
+ * This symbol, if defined, indicates that the readv routine is
+ * available to do gather reads. You will also need <sys/uio.h>
+ * and there I_SYSUIO.
+ */
+#$d_readv HAS_READV /**/
+
+/* HAS_SETSPENT:
+ * This symbol, if defined, indicates that the setspent system call is
+ * available to initialize the scan of SysV shadow password entries.
+ */
+#$d_setspent HAS_SETSPENT /**/
+
/* USE_SFIO:
* This symbol, if defined, indicates that sfio should
* be used.
*/
#$d_sfio USE_SFIO /**/
+/* HAS_FSTATFS:
+ * This symbol, if defined, indicates that the fstatfs routine is
+ * available to stat filesystems of file descriptors.
+ */
+/* HAS_STRUCT_STATFS_FLAGS:
+ * This symbol, if defined, indicates that the struct statfs
+ * does have the f_flags member containing the mount flags of
+ * the filesystem holding the file.
+ * This kind of struct statfs is coming from sys/mount.h (BSD),
+ * not from sys/statfs.h (SYSV).
+ */
+#$d_fstatfs HAS_FSTATFS /**/
+#$d_statfsflags HAS_STRUCT_STATFS_FLAGS /**/
+
+/* HAS_FSTATVFS:
+ * This symbol, if defined, indicates that the fstatvfs routine is
+ * available to stat filesystems of file descriptors.
+ */
+#$d_fstatvfs HAS_FSTATVFS /**/
+
+/* HAS_TELLDIR_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the telldir() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern long telldir (DIR*);
+ */
+#$d_telldirproto HAS_TELLDIR_PROTO /**/
+
+/* HAS_WRITEV:
+ * This symbol, if defined, indicates that the writev routine is
+ * available to do scatter writes.
+ */
+#$d_writev HAS_WRITEV /**/
+
/* HAS_DBMINIT64:
* This symbol, if defined, indicates that the dbminit64 routine is
* available to open dbm files larger than 2 gigabytes.
*/
#$usedl USE_DYNAMIC_LOADING /**/
+/* FFLUSH_NULL:
+ * This symbol, if defined, tells that fflush(NULL) does flush
+ * all pending stdio output.
+ */
+/* FFLUSH_ALL:
+ * This symbol, if defined, tells that to flush
+ * all pending stdio output one must loop through all
+ * the stdio file handles stored in an array and fflush them.
+ * Note that if fflushNULL is defined, fflushall will not
+ * even be probed for and will be left undefined.
+ */
+#$fflushNULL FFLUSH_NULL /**/
+#$fflushall FFLUSH_ALL /**/
+
/* DB_Prefix_t:
* This symbol contains the type of the prefix structure element
* in the <db.h> header file. In older versions of DB, it was
#$i_inttypes I_INTTYPES /**/
#$d_int64t HAS_INT64_T /**/
+/* I_MNTENT:
+ * This symbol, if defined, indicates that <mntent.h> exists and
+ * should be included.
+ */
+#$i_mntent I_MNTENT /**/
+
+/* I_NETINET_TCP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <netinet/tcp.h>.
+ */
+#$i_netinettcp I_NETINET_TCP /**/
+
+/* I_POLL:
+ * This symbol, if defined, indicates that <poll.h> exists and
+ * should be included.
+ */
+#$i_poll I_POLL /**/
+
+/* I_SHADOW:
+ * This symbol, if defined, indicates that <shadow.h> exists and
+ * should be included.
+ */
+#$i_shadow I_SHADOW /**/
+
+/* I_SYS_MMAN:
+ * This symbol, if defined, indicates that <sys/mman.h> exists and
+ * should be included.
+ */
+#$i_sysmman I_SYS_MMAN /**/
+
+/* I_SYS_MOUNT:
+ * This symbol, if defined, indicates that <sys/mount.h> exists and
+ * should be included.
+ */
+#$i_sysmount I_SYS_MOUNT /**/
+
+/* I_SYS_STATVFS:
+ * This symbol, if defined, indicates that <sys/statvfs.h> exists and
+ * should be included.
+ */
+#$i_sysstatvfs I_SYS_STATVFS /**/
+
+/* INSTALL_USR_BIN_PERL:
+ * This symbol, if defined, indicates that Perl is to be installed
+ * also as /usr/bin/perl.
+ */
+#$installusrbinperl INSTALL_USR_BIN_PERL /**/
+
/* HAS_FSTAT64:
* This symbol, if defined, indicates that the fstat64 routine is
* available to stat files (fds) larger than 2 gigabytes.
#$d_stat64 HAS_STAT64 /**/
#$d_telldir64 HAS_TELLDIR64 /**/
#$d_truncate64 HAS_TRUNCATE64 /**/
-#$d_off64t HAS_OFF64_T /**/
-#$d_dirent64s HAS_STRUCT_DIRENT64 /**/
+#$d_off64_t HAS_OFF64_T /**/
+#$d_dirent64_s HAS_STRUCT_DIRENT64 /**/
/* PRIVLIB:
* This symbol contains the name of the private library for this package.
#$d_ftello64 HAS_FTELLO64 /**/
#$d_tmpfile64 HAS_TMPFILE64 /**/
+/* HAS_STDIO_STREAM_ARRAY:
+ * This symbol, if defined, tells that there is an array
+ * holding the stdio streams.
+ */
+/* STDIO_STREAM_ARRAY:
+ * This symbol tells the name of the array holding the stdio streams.
+ * Usual values include _iob, __iob, and __sF.
+ */
+#$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY /**/
+#define STDIO_STREAM_ARRAY $stdio_stream_array
+
/* USE_64_BITS:
* This symbol, if defined, indicates that 64-bit interfaces should
* be used when available. If not defined, the native default interfaces
*/
#$use64bits USE_64_BITS /**/
+/* MULTIPLICITY:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use multiplicity.
+ */
+#$usemultiplicity MULTIPLICITY /**/
+
/* USE_PERLIO:
* This symbol, if defined, indicates that the PerlIO abstraction should
* be used throughout. If not defined, stdio should be
* This symbol, if defined, indicates that the system provides
* a prototype for the drand48() function. Otherwise, it is up
* to the program to supply one. A good guess is
- * extern double drand48 _((void));
+ * extern double drand48 (void);
*/
#$d_drand48proto HAS_DRAND48_PROTO /**/
*/
#define ARCHNAME "$archname" /**/
-/* PTHREAD_CREATE_JOINABLE:
+/* OLD_PTHREAD_CREATE_JOINABLE:
* This symbol, if defined, indicates how to create pthread
- * in joinable (aka undetached) state. Not defined here if
- * pthread.h already has defined PTHREAD_CREATE_JOINABLE.
- * If defined, possible values are PTHREAD_CREATE_UNDETACHED
+ * in joinable (aka undetached) state. NOTE: not defined
+ * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ * (the new version of the constant).
+ * If defined, known values are PTHREAD_CREATE_UNDETACHED
* and __UNDETACHED.
*/
-#$d_pthread_create_joinable PTHREAD_CREATE_JOINABLE $pthread_create_joinable /**/
+#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/
/* HAS_PTHREAD_YIELD:
* This symbol, if defined, indicates that the pthread_yield
*/
#$i_machcthr I_MACH_CTHREADS /**/
-/* MULTIPLICITY:
- * This symbol, if defined, indicates that Perl should
- * be built to use multiplicity.
- */
-#$usemultiplicity MULTIPLICITY /**/
-
/* USE_THREADS:
* This symbol, if defined, indicates that Perl should
* be built to use threads.
https://perl5.git.perl.org / perl5.git / blobdiff