# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Thu Aug 17 02:52:39 EET DST 2000 [metaconfig 3.0 PL70]
-# (with additional metaconfig patches by perlbug@perl.com)
+# Generated on Tue Nov 7 00:26:20 EET 2000 [metaconfig 3.0 PL70]
+# (with additional metaconfig patches by perlbug@perl.org)
cat >/tmp/c1$$ <<EOF
ARGGGHHHH!!!!!
test -d UU || mkdir UU
cd UU && rm -f ./*
+ccname=''
+ccversion=''
ccsymbols=''
cppccsymbols=''
cppsymbols=''
+perllibs=''
dynamic_ext=''
extensions=''
known_extensions=''
d_fchmod=''
d_fchown=''
d_fcntl=''
+d_fcntl_can_lock=''
d_fd_macros=''
d_fd_set=''
d_fds_bits=''
sockethdr=''
socketlib=''
d_socklen_t=''
+d_socks5_init=''
d_sqrtl=''
d_statblks=''
d_statfs_f_flags=''
d_statvfs=''
d_stdio_cnt_lval=''
d_stdio_ptr_lval=''
+d_stdio_ptr_lval_nochange_cnt=''
+d_stdio_ptr_lval_sets_cnt=''
d_stdiobase=''
d_stdstdio=''
stdio_base=''
libsfound=''
libspath=''
lns=''
-d_PRIEldbl=''
-d_PRIFldbl=''
-d_PRIGldbl=''
+d_PRIEUldbl=''
+d_PRIFUldbl=''
+d_PRIGUldbl=''
d_PRIeldbl=''
d_PRIfldbl=''
d_PRIgldbl=''
-sPRIEldbl=''
-sPRIFldbl=''
-sPRIGldbl=''
+d_SCNfldbl=''
+sPRIEUldbl=''
+sPRIFUldbl=''
+sPRIGUldbl=''
sPRIeldbl=''
sPRIfldbl=''
sPRIgldbl=''
+sSCNfldbl=''
lseeksize=''
lseektype=''
make_set_make=''
man3dir=''
man3direxp=''
man3ext=''
-huge=''
-large=''
-medium=''
-models=''
-small=''
-split=''
modetype=''
multiarch=''
mydomain=''
uvsize=''
uvtype=''
ivdformat=''
+nvEUformat=''
+nvFUformat=''
+nvGUformat=''
+nveformat=''
+nvfformat=''
+nvgformat=''
+uvXUformat=''
uvoformat=''
uvuformat=''
uvxformat=''
privlibexp=''
prototype=''
ptrsize=''
-d_PRIX64=''
+d_PRIXU64=''
d_PRId64=''
d_PRIi64=''
d_PRIo64=''
d_PRIu64=''
d_PRIx64=''
-sPRIX64=''
+sPRIXU64=''
sPRId64=''
sPRIi64=''
sPRIo64=''
usevendorprefix=''
vendorprefix=''
vendorprefixexp=''
+versiononly=''
defvoidused=''
voidflags=''
pm_apiversion=''
fi
i_whoami=''
+ccname=''
+ccversion=''
+perllibs=''
: set useposix=false in your hint file to disable the POSIX extension.
useposix=true
: set useopcode=false in your hint file to disable the Opcode extension.
_exe=''
: Extra object files, if any, needed on this platform.
archobjs=''
+archname=''
: Possible local include directories to search.
: Set locincpth to "" in a hint file to defeat local include searches.
locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
: general looking path for locating libraries
-glibpth="/usr/lib/large /lib /usr/lib $xlibpth"
-glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
+glibpth="/lib /usr/lib $xlibpth"
glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
test -f /usr/shlib/libc.so && glibpth="/usr/shlib $glibpth"
test -f /shlib/libc.so && glibpth="/shlib $glibpth"
libswanted=''
: some systems want to use only the non-versioned libso:s
ignore_versioned_solibs=''
+archname64=''
ccflags_uselargefiles=''
ldflags_uselargefiles=''
libswanted_uselargefiles=''
$me: Fatal Error: I can't find a Bourne Shell anywhere.
Usually it's in /bin/sh. How did you even get this far?
-Please contact me (Perl Maintainers) at perlbug@perl.com and
+Please contact me (Perl Maintainers) at perlbug@perl.org and
we'll try to straighten this all out.
EOM
exit 1
You have the option of continuing the configuration process, despite the
distinct possibility that your kit is damaged, by typing 'y'es. If you
do, don't blame me if something goes wrong. I advise you to type 'n'o
-and contact the author (perlbug@perl.com).
+and contact the author (perlbug@perl.org).
EOM
echo $n "Continue? [n] $c" >&4
You may safely delete it if you wish.
EOF
-xpatchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
+xversion=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
case "$usedevel" in
$define|true|[yY]*) ;;
-*) case "$xpatchlevel" in
+*) case "$xversion" in
*[13579])
cat >&4 <<EOH
*** WHOA THERE!!! ***
This is an UNSTABLE DEVELOPMENT release.
- (The patchlevel, $xpatchlevel, is odd--as opposed to even,
- and that signifies a development release. If you want a
- maintenance release, you want an even-numbered release.)
+ The version of this $package distribution is $xversion, that is, odd,
+ (as opposed to even) and that signifies a development release.
+ If you want a maintenance release, you want an even-numbered version.
Do ***NOT*** install this into production use.
Data corruption and crashes are possible.
Unix system. If despite that it blows up on yours, your best bet is to edit
Configure and run it again. If you can't run Configure for some reason,
you'll have to generate a config.sh file by hand. Whatever problems you
-have, let me (perlbug@perl.com) know how I blew it.
+have, let me (perlbug@perl.org) know how I blew it.
This installation script affects things in two ways:
return 0;
}
EOM
- if $cc -o try try.c; then
+ if $cc -o try $ccflags try.c; then
:
else
echo "Uh-oh, the C compiler '$cc' doesn't seem to be working." >&4
fi
fi
case "$ans" in
- [yY]*) cc=gcc; ccflags=''; despair=no ;;
+ [yY]*) cc=gcc; ccname=gcc; ccflags=''; despair=no ;;
esac
fi
fi
if $test X"$despair" = Xyes; then
- echo "You need to find a working C compiler." >&4
- echo "I cannot continue any further, aborting." >&4
+ $cat >&4 <<EOM
+You need to find a working C compiler.
+Either (purchase and) install the C compiler supplied by your OS vendor,
+or for a free C compiler try http://gcc.gnu.org/
+I cannot continue any further, aborting.
+EOM
exit 1
fi
fi
rp="I see a config.sh file. Shall I use it to set the defaults?"
. UU/myread
case "$ans" in
- n*|N*) echo "OK, I'll ignore it."; mv config.sh config.sh.old;;
+ n*|N*) echo "OK, I'll ignore it."
+ mv config.sh config.sh.old
+ myuname="$newmyuname"
+ ;;
*) echo "Fetching default answers from your old config.sh file..." >&4
tmp_n="$n"
tmp_c="$c"
(cd $src/hints; ls -C *.sh) | $sed 's/\.sh/ /g' >&4
dflt=''
: Half the following guesses are probably wrong... If you have better
- : tests or hints, please send them to perlbug@perl.com
+ : tests or hints, please send them to perlbug@perl.org
: The metaconfig authors would also appreciate a copy...
$test -f /irix && osname=irix
$test -f /xenix && osname=sco_xenix
esac
;;
next*) osname=next ;;
+ nonstop-ux) osname=nonstopux ;;
POSIX-BC | posix-bc ) osname=posix-bc
osvers="$3"
;;
;;
esac
test "$override" && . ./optdef.sh
-myuname="$newmyuname"
: Restore computed paths
for file in $loclist $trylist; do
set usemultiplicity
eval $setvar
-: determine where manual pages are on this system
-echo " "
-case "$sysman" in
-'')
- syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
- syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
- syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
- syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
- syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
- sysman=`./loc . /usr/man/man1 $syspath`
- ;;
-esac
-if $test -d "$sysman"; then
- echo "System manual is in $sysman." >&4
-else
- echo "Could not find manual pages in source form." >&4
-fi
-
-: see what memory models we can support
-case "$models" in
-'')
- $cat >pdp11.c <<'EOP'
-int main() {
-#ifdef pdp11
- exit(0);
-#else
- exit(1);
-#endif
-}
-EOP
- case "$cc" in
- '') modelcc="$cc" ;;
- *) modelcc="cc" ;;
- esac
- ( $modelcc -o pdp11 pdp11.c ) >/dev/null 2>&1
- if $test -f pdp11 && ./pdp11 2>/dev/null; then
- dflt='unsplit split'
- else
- tans=`./loc . X /lib/small /lib/large /usr/lib/small /usr/lib/large /lib/medium /usr/lib/medium /lib/huge`
- case "$tans" in
- X) dflt='none';;
- *) if $test -d /lib/small || $test -d /usr/lib/small; then
- dflt='small'
- else
- dflt=''
- fi
- if $test -d /lib/medium || $test -d /usr/lib/medium; then
- dflt="$dflt medium"
- fi
- if $test -d /lib/large || $test -d /usr/lib/large; then
- dflt="$dflt large"
- fi
- if $test -d /lib/huge || $test -d /usr/lib/huge; then
- dflt="$dflt huge"
- fi
- esac
- fi;;
-*) dflt="$models";;
-esac
-$cat <<EOM
-
-Some systems have different model sizes. On most systems they are called
-small, medium, large, and huge. On the PDP11 they are called unsplit and
-split. If your system doesn't support different memory models, say "none".
-If you wish to force everything to one memory model, say "none" here and
-put the appropriate flags later when it asks you for other cc and ld flags.
-Venix systems may wish to put "none" and let the compiler figure things out.
-(In the following question multiple model names should be space separated.)
-
-The default for most systems is "none".
-
-EOM
-rp="Which memory models are supported?"
-. ./myread
-models="$ans"
-
-case "$models" in
-none)
- small=''
- medium=''
- large=''
- huge=''
- unsplit=''
- split=''
- ;;
-*split)
- case "$split" in
- '') if $contains '\-i' $sysman/ld.1 >/dev/null 2>&1 || \
- $contains '\-i' $sysman/cc.1 >/dev/null 2>&1; then
- dflt='-i'
- else
- dflt='none'
- fi;;
- *) dflt="$split";;
- esac
- rp="What flag indicates separate I and D space?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';;
- esac
- split="$tans"
- unsplit='';;
-*large*|*small*|*medium*|*huge*)
- case "$models" in
- *large*)
- case "$large" in
- '') dflt='-Ml';;
- *) dflt="$large";;
- esac
- rp="What flag indicates large model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- large="$tans";;
- *) large='';;
- esac
- case "$models" in
- *huge*) case "$huge" in
- '') dflt='-Mh';;
- *) dflt="$huge";;
- esac
- rp="What flag indicates huge model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- huge="$tans";;
- *) huge="$large";;
- esac
- case "$models" in
- *medium*) case "$medium" in
- '') dflt='-Mm';;
- *) dflt="$medium";;
- esac
- rp="What flag indicates medium model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- medium="$tans";;
- *) medium="$large";;
- esac
- case "$models" in
- *small*) case "$small" in
- '') dflt='none';;
- *) dflt="$small";;
- esac
- rp="What flag indicates small model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- small="$tans";;
- *) small='';;
- esac
- ;;
-*)
- echo "Unrecognized memory models--you may have to edit Makefile.SH" >&4
- ;;
-esac
-$rm -f pdp11.* pdp11
-
: make some quick guesses about what we are up against
echo " "
$echo $n "Hmm... $c"
then
echo "Looks kind of like an OSF/1 system, but we'll see..."
echo exit 0 >osf1
-elif test `echo abc | tr a-z A-Z` = Abc ; then
+elif test `echo abc | $tr a-z A-Z` = Abc ; then
xxx=`./loc addbib blurfl $pth`
if $test -f $xxx; then
echo "Looks kind of like a USG system with BSD features, but we'll see..."
;;
esac
: Detect OS2. The p_ variable is set above in the Head.U unit.
+: Note that this also -- wrongly -- detects e.g. dos-djgpp, which also uses
+: semicolon as a patch separator
case "$p_" in
:) ;;
*)
$cat <<'EOI'
I have the feeling something is not exactly right, however...don't tell me...
lemme think...does HAL ring a bell?...no, of course, you're only running OS/2!
+(Or you may be running DOS with DJGPP.)
EOI
echo exit 0 >os2
;;
$eunicefix bsd usg v7 osf1 eunice xenix venix os2
$rm -f foo
-: see if we need a special compiler
-echo " "
-if ./usg; then
- case "$cc" in
- '') case "$Mcc" in
- /*) dflt='Mcc';;
- *) case "$large" in
- -M*) dflt='cc';;
- *) if $contains '\-M' $sysman/cc.1 >/dev/null 2>&1 ; then
- if $contains '\-M' $sysman/cpp.1 >/dev/null 2>&1; then
- dflt='cc'
- else
- dflt='cc -M'
- fi
- else
- dflt='cc'
- fi;;
- esac;;
- esac;;
- *) dflt="$cc";;
- esac
- case "$dflt" in
- *M*) $cat <<'EOM'
-On some older systems the default C compiler will not resolve multiple global
-references that happen to have the same name. On some such systems the "Mcc"
-command may be used to force these to be resolved. On other systems a "cc -M"
-command is required. (Note that the -M flag on other systems indicates a
-memory model to use!) If you have the Gnu C compiler, you might wish to use
-that instead.
-
-EOM
- ;;
- esac
- rp="Use which C compiler?"
- . ./myread
- cc="$ans"
-else
- case "$cc" in
- '') dflt=cc;;
- *) dflt="$cc";;
- esac
- rp="Use which C compiler?"
- . ./myread
- cc="$ans"
-fi
+case "$cc" in
+'') dflt=cc;;
+*) dflt="$cc";;
+esac
+rp="Use which C compiler?"
+. ./myread
+cc="$ans"
: Look for a hint-file generated 'call-back-unit'. Now that the
: user has specified the compiler, we may need to set or change some
: other defaults.
exit(0);
}
EOM
-if $cc $ldflags -o gccvers gccvers.c; then
+if $cc -o gccvers $ldflags gccvers.c; then
gccversion=`./gccvers`
case "$gccversion" in
'') echo "You are not using GNU cc." ;;
*) echo "You are using GNU cc $gccversion."
+ ccname=gcc
;;
esac
else
esac
;;
esac
-
-
-
+case "$ccname" in
+'') ccname="$cc" ;;
+esac
: see how we invoke the C preprocessor
echo " "
case "$fn" in
*\(*)
- expr $fn : '.*(\(.*\)).*' | tr ',' $trnl >getfile.ok
+ expr $fn : '.*(\(.*\)).*' | $tr ',' $trnl >getfile.ok
fn=`echo $fn | sed 's/(.*)//'`
;;
esac
if $test -d $thisincl; then
if $test x$thisincl != x$usrinc; then
case "$dflt" in
- *$thisincl*);;
- *) dflt="$dflt -I$thisincl";;
+ *" -I$thisincl "*);;
+ *) dflt="$dflt -I$thisincl ";;
esac
fi
fi
case "$dflt" in
''|' ') dflt=none;;
esac
+
$cat <<EOH
Your C compiler may want other flags. For this question you should include
#include <stdio.h>
int main() { printf("Ok\n"); exit(0); }
EOF
-set X $cc $optimize $ccflags -o try $ldflags try.c $libs
+set X $cc -o try $optimize $ccflags $ldflags try.c $libs
shift
$cat >try.msg <<'EOM'
I've tried to compile and run the following simple program:
EOM
dflt=y
-if sh -c "$cc $optimize $ccflags -o try $ldflags try.c $libs" >>try.msg 2>&1; then
+if sh -c "$cc -o try $optimize $ccflags $ldflags try.c $libs" >>try.msg 2>&1; then
if sh -c './try' >>try.msg 2>&1; then
xxx=`./try`
case "$xxx" in
compile='
mc_file=$1;
shift;
-$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs > /dev/null 2>&1;'
+$cc -o ${mc_file} $optimize $ccflags $ldflags $* ${mc_file}.c $libs > /dev/null 2>&1;'
: define a shorthand compile call for compilations that should be ok.
compile_ok='
mc_file=$1;
shift;
-$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs;'
+$cc -o ${mc_file} $optimize $ccflags $ldflags $* ${mc_file}.c $libs;'
: check for lengths of integral types
echo " "
;;
esac
-: determine the architecture name
echo " "
-if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
- tarch=`arch`"-$osname"
-elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
- if uname -m > tmparch 2>&1 ; then
- tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
- -e 's/$/'"-$osname/" tmparch`
- else
- tarch="$osname"
- fi
- $rm -f tmparch
+echo "Checking for GNU C Library..." >&4
+cat >gnulibc.c <<EOM
+#include <stdio.h>
+int main()
+{
+#ifdef __GLIBC__
+ exit(0);
+#else
+ exit(1);
+#endif
+}
+EOM
+set gnulibc
+if eval $compile_ok && ./gnulibc; then
+ val="$define"
+ echo "You are using the GNU C Library"
else
- tarch="$osname"
+ val="$undef"
+ echo "You are not using the GNU C Library"
fi
-case "$myarchname" in
-''|"$tarch") ;;
-*)
- echo "(Your architecture name used to be $myarchname.)"
- archname=''
- ;;
-esac
-myarchname="$tarch"
-case "$archname" in
-'') dflt="$tarch";;
-*) dflt="$archname";;
-esac
-rp='What is your architecture name'
-. ./myread
-archname="$ans"
-case "$usethreads" in
-$define)
- echo "Threads selected." >&4
- case "$archname" in
- *-thread*) echo "...and architecture name already has -thread." >&4
- ;;
- *) archname="$archname-thread"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-esac
-case "$usemultiplicity" in
-$define)
- echo "Multiplicity selected." >&4
- case "$archname" in
- *-multi*) echo "...and architecture name already has -multi." >&4
- ;;
- *) archname="$archname-multi"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-esac
-case "$use64bitint" in
-$define)
- case "$archname64" in
- '')
+$rm -f gnulibc*
+set d_gnulibc
+eval $setvar
+
+: see if nm is to be used to determine whether a symbol is defined or not
+case "$usenm" in
+'')
+ dflt=''
+ case "$d_gnulibc" in
+ "$define")
+ echo " "
+ echo "nm probably won't work on the GNU C Library." >&4
+ dflt=n
;;
- *)
- case "$archname" in
- *-$archname64*) echo "...and architecture name already has $archname64." >&4
- ;;
- *) archname="$archname-$archname64"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
+ esac
+ case "$dflt" in
+ '')
+ if $test "$osname" = aix -a ! -f /lib/syscalls.exp; then
+ echo " "
+ echo "Whoops! This is an AIX system without /lib/syscalls.exp!" >&4
+ echo "'nm' won't be sufficient on this sytem." >&4
+ dflt=n
+ fi
+ ;;
+ esac
+ case "$dflt" in
+ '') dflt=`$egrep 'inlibc|csym' $rsrc/Configure | wc -l 2>/dev/null`
+ if $test $dflt -gt 20; then
+ dflt=y
+ else
+ dflt=n
+ fi
;;
esac
-esac
-
-: determine root of directory hierarchy where package will be installed.
-case "$prefix" in
-'')
- dflt=`./loc . /usr/local /usr/local /local /opt /usr`
;;
*)
- dflt="$prefix"
+ case "$usenm" in
+ true|$define) dflt=y;;
+ *) dflt=n;;
+ esac
;;
esac
$cat <<EOM
-By default, $package will be installed in $dflt/bin, manual pages
-under $dflt/man, etc..., i.e. with $dflt as prefix for all
-installation directories. Typically this is something like /usr/local.
-If you wish to have binaries under /usr/bin but other parts of the
-installation under /usr/local, that's ok: you will be prompted
-separately for each of the installation directories, the prefix being
-only used to set the defaults.
+I can use $nm to extract the symbols from your C libraries. This
+is a time consuming task which may generate huge output on the disk (up
+to 3 megabytes) but that should make the symbols extraction faster. The
+alternative is to skip the 'nm' extraction part and to compile a small
+test program instead to determine whether each symbol is present. If
+you have a fast C compiler and/or if your 'nm' output cannot be parsed,
+this may be the best solution.
+
+You probably shouldn't let me use 'nm' if you are using the GNU C Library.
EOM
-fn=d~
-rp='Installation prefix to use?'
-. ./getfile
-oldprefix=''
-case "$prefix" in
-'') ;;
-*)
- case "$ans" in
- "$prefix") ;;
- *) oldprefix="$prefix";;
- esac
- ;;
+rp="Shall I use $nm to extract C symbols from the libraries?"
+. ./myread
+case "$ans" in
+[Nn]*) usenm=false;;
+*) usenm=true;;
esac
-prefix="$ans"
-prefixexp="$ansexp"
-: is AFS running?
-echo " "
-case "$afs" in
-$define|true) afs=true ;;
-$undef|false) afs=false ;;
-*) if test -d /afs; then
- afs=true
+runnm=$usenm
+case "$reuseval" in
+true) runnm=false;;
+esac
+
+: nm options which may be necessary
+case "$nm_opt" in
+'') if $test -f /mach_boot; then
+ nm_opt='' # Mach
+ elif $test -d /usr/ccs/lib; then
+ nm_opt='-p' # Solaris (and SunOS?)
+ elif $test -f /dgux; then
+ nm_opt='-p' # DG-UX
+ elif $test -f /lib64/rld; then
+ nm_opt='-p' # 64-bit Irix
else
- afs=false
- fi
+ nm_opt=''
+ fi;;
+esac
+
+: nm options which may be necessary for shared libraries but illegal
+: for archive libraries. Thank you, Linux.
+case "$nm_so_opt" in
+'') case "$myuname" in
+ *linux*)
+ if $nm --help | $grep 'dynamic' > /dev/null 2>&1; then
+ nm_so_opt='--dynamic'
+ fi
+ ;;
+ esac
;;
esac
-if $afs; then
- echo "AFS may be running... I'll be extra cautious then..." >&4
+
+case "$runnm" in
+true)
+: get list of predefined functions in a handy place
+echo " "
+case "$libc" in
+'') libc=unknown
+ case "$libs" in
+ *-lc_s*) libc=`./loc libc_s$_a $libc $libpth`
+ esac
+ ;;
+esac
+libnames='';
+case "$libs" in
+'') ;;
+*) for thislib in $libs; do
+ case "$thislib" in
+ -lc|-lc_s)
+ : Handle C library specially below.
+ ;;
+ -l*)
+ thislib=`echo $thislib | $sed -e 's/^-l//'`
+ if try=`./loc lib$thislib.$so.'*' X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib$_a X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc $thislib$_a X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$try"; then
+ :
+ else
+ try=''
+ fi
+ libnames="$libnames $try"
+ ;;
+ *) libnames="$libnames $thislib" ;;
+ esac
+ done
+ ;;
+esac
+xxx=normal
+case "$libc" in
+unknown)
+ set /lib/libc.$so
+ for xxx in $libpth; do
+ $test -r $1 || set $xxx/libc.$so
+ : The messy sed command sorts on library version numbers.
+ $test -r $1 || \
+ set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
+ tr ' ' $trnl | egrep -v '\.[A-Za-z]*$' | $sed -e '
+ h
+ s/[0-9][0-9]*/0000&/g
+ s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
+ G
+ s/\n/ /' | \
+ $sort | $sed -e 's/^.* //'`
+ eval set \$$#
+ done
+ $test -r $1 || set /usr/ccs/lib/libc.$so
+ $test -r $1 || set /lib/libsys_s$_a
+ ;;
+*)
+ set blurfl
+ ;;
+esac
+if $test -r "$1"; then
+ echo "Your (shared) C library seems to be in $1."
+ libc="$1"
+elif $test -r /lib/libc && $test -r /lib/clib; then
+ echo "Your C library seems to be in both /lib/clib and /lib/libc."
+ xxx=apollo
+ libc='/lib/clib /lib/libc'
+ if $test -r /lib/syslib; then
+ echo "(Your math library is in /lib/syslib.)"
+ libc="$libc /lib/syslib"
+ fi
+elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
+ echo "Your C library seems to be in $libc, as you said before."
+elif $test -r $incpath/usr/lib/libc$_a; then
+ libc=$incpath/usr/lib/libc$_a;
+ echo "Your C library seems to be in $libc. That's fine."
+elif $test -r /lib/libc$_a; then
+ libc=/lib/libc$_a;
+ echo "Your C library seems to be in $libc. You're normal."
else
- echo "AFS does not seem to be running..." >&4
+ if tans=`./loc libc$_a blurfl/dyick $libpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
+ libnames="$libnames "`./loc clib blurfl/dyick $libpth`
+ elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc Slibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc Mlibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ :
+ else
+ tans=`./loc Llibc$_a blurfl/dyick $xlibpth`
+ fi
+ if $test -r "$tans"; then
+ echo "Your C library seems to be in $tans, of all places."
+ libc=$tans
+ else
+ libc='blurfl'
+ fi
fi
+if $test $xxx = apollo -o -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
+ dflt="$libc"
+ cat <<EOM
-: determine installation prefix for where package is to be installed.
-if $afs; then
-$cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-files will reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
+If the guess above is wrong (which it might be if you're using a strange
+compiler, or your machine supports multiple models), you can override it here.
EOM
- case "$installprefix" in
- '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installprefix";;
- esac
else
-$cat <<EOM
+ dflt=''
+ echo $libpth | $tr ' ' $trnl | $sort | $uniq > libpath
+ cat >&4 <<EOM
+I can't seem to find your C library. I've looked in the following places:
-In some special cases, particularly when building $package for distribution,
-it is convenient to distinguish between the directory in which files should
-be installed from the directory ($prefix) in which they
-will eventually reside. For most users, these two directories are the same.
+EOM
+ $sed 's/^/ /' libpath
+ cat <<EOM
+
+None of these seems to contain your C library. I need to get its name...
EOM
- case "$installprefix" in
- '') dflt=$prefix ;;
- *) dflt=$installprefix;;
- esac
fi
-fn=d~
-rp='What installation prefix should I use for installing files?'
+fn=f
+rp='Where is your C library?'
. ./getfile
-installprefix="$ans"
-installprefixexp="$ansexp"
+libc="$ans"
-: set the prefixit variable, to compute a suitable default value
-prefixit='case "$3" in
-""|none)
- case "$oldprefix" in
- "") eval "$1=\"\$$2\"";;
- *)
- case "$3" in
- "") eval "$1=";;
- none)
- eval "tp=\"\$$2\"";
- case "$tp" in
- ""|" ") eval "$1=\"\$$2\"";;
- *) eval "$1=";;
- esac;;
- esac;;
- esac;;
-*)
- eval "tp=\"$oldprefix-\$$2-\""; eval "tp=\"$tp\"";
- case "$tp" in
- --|/*--|\~*--) eval "$1=\"$prefix/$3\"";;
- /*-$oldprefix/*|\~*-$oldprefix/*)
- eval "$1=\`echo \$$2 | sed \"s,^$oldprefix,$prefix,\"\`";;
- *) eval "$1=\"\$$2\"";;
- esac;;
-esac'
+echo " "
+echo $libc $libnames | $tr ' ' $trnl | $sort | $uniq > libnames
+set X `cat libnames`
+shift
+xxx=files
+case $# in 1) xxx=file; esac
+echo "Extracting names from the following $xxx for later perusal:" >&4
+echo " "
+$sed 's/^/ /' libnames >&4
+echo " "
+$echo $n "This may take a while...$c" >&4
+for file in $*; do
+ case $file in
+ *$so*) $nm $nm_so_opt $nm_opt $file 2>/dev/null;;
+ *) $nm $nm_opt $file 2>/dev/null;;
+ esac
+done >libc.tmp
-: get the patchlevel
-echo " "
-echo "Getting the current patchlevel..." >&4
-if $test -r $rsrc/patchlevel.h;then
- revision=`awk '/define[ ]+PERL_REVISION/ {print $3}' $rsrc/patchlevel.h`
- patchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
- subversion=`awk '/define[ ]+PERL_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
- api_revision=`awk '/define[ ]+PERL_API_REVISION/ {print $3}' $rsrc/patchlevel.h`
- api_version=`awk '/define[ ]+PERL_API_VERSION/ {print $3}' $rsrc/patchlevel.h`
- api_subversion=`awk '/define[ ]+PERL_API_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
-else
- revision=0
- patchlevel=0
- subversion=0
- api_revision=0
- api_version=0
- api_subversion=0
-fi
-$echo $n "(You have $package revision $revision" $c
-$echo $n " patchlevel $patchlevel" $c
-test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
-echo ".)"
-case "$osname" in
-dos|vms)
- : XXX Should be a Configure test for double-dots in filenames.
- version=`echo $revision $patchlevel $subversion | \
- $awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
- api_versionstring=`echo $api_revision $api_version $api_subversion | \
- $awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
- ;;
-*)
- version=`echo $revision $patchlevel $subversion | \
+$echo $n ".$c"
+$grep fprintf libc.tmp > libc.ptf
+xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
+xrun='eval "<libc.tmp $com >libc.list"; echo "done" >&4'
+xxx='[ADTSIW]'
+if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *_[_.]*//p' -e 's/^.* $xxx *//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^__*//' -e 's/^\([a-zA-Z_0-9$]*\).*xtern.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e '/|UNDEF/d' -e '/FUNC..GL/s/^.*|__*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.* D __*//p' -e 's/^.* D //p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^_//' -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$grep '|' | $sed -n -e '/|COMMON/d' -e '/|DATA/d' \
+ -e '/ file/d' -e 's/^\([^ ]*\).*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p' -e 's/^.*|FUNC |WEAK .*|//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^__//' -e '/|Undef/d' -e '/|Proc/s/ .*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|Proc .*|Text *| *//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^[-0-9a-f ]*_\(.*\)=.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/.*\.text n\ \ \ \.//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="sed -n -e 's/^__.*//' -e 's/[ ]*D[ ]*[0-9]*.*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+else
+ $nm -p $* 2>/dev/null >libc.tmp
+ $grep fprintf libc.tmp > libc.ptf
+ if com="$sed -n -e 's/^.* [ADTSIW] *_[_.]*//p' -e 's/^.* [ADTSIW] //p'";\
+ eval $xscan; $contains '^fprintf$' libc.list >/dev/null 2>&1
+ then
+ nm_opt='-p'
+ eval $xrun
+ else
+ echo " "
+ echo "$nm didn't seem to work right. Trying $ar instead..." >&4
+ com=''
+ if $ar t $libc > libc.tmp && $contains '^fprintf$' libc.tmp >/dev/null 2>&1; then
+ for thisname in $libnames $libc; do
+ $ar t $thisname >>libc.tmp
+ done
+ $sed -e "s/\\$_o\$//" < libc.tmp > libc.list
+ echo "Ok." >&4
+ elif test "X$osname" = "Xos2" && $ar tv $libc > libc.tmp; then
+ # Repeat libc to extract forwarders to DLL entries too
+ for thisname in $libnames $libc; do
+ $ar tv $thisname >>libc.tmp
+ # Revision 50 of EMX has bug in $ar.
+ # it will not extract forwarders to DLL entries
+ # Use emximp which will extract exactly them.
+ emximp -o tmp.imp $thisname \
+ 2>/dev/null && \
+ $sed -e 's/^\([_a-zA-Z0-9]*\) .*$/\1/p' \
+ < tmp.imp >>libc.tmp
+ $rm tmp.imp
+ done
+ $sed -e "s/\\$_o\$//" -e 's/^ \+//' < libc.tmp > libc.list
+ echo "Ok." >&4
+ else
+ echo "$ar didn't seem to work right." >&4
+ echo "Maybe this is a Cray...trying bld instead..." >&4
+ if bld t $libc | $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" > libc.list
+ then
+ for thisname in $libnames; do
+ bld t $libnames | \
+ $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" >>libc.list
+ $ar t $thisname >>libc.tmp
+ done
+ echo "Ok." >&4
+ else
+ echo "That didn't work either. Giving up." >&4
+ exit 1
+ fi
+ fi
+ fi
+fi
+nm_extract="$com"
+if $test -f /lib/syscalls.exp; then
+ echo " "
+ echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
+ $sed -n 's/^\([^ ]*\)[ ]*syscall[0-9]*$/\1/p' /lib/syscalls.exp >>libc.list
+fi
+;;
+esac
+$rm -f libnames libpath
+
+: is a C symbol defined?
+csym='tlook=$1;
+case "$3" in
+-v) tf=libc.tmp; tc=""; tdc="";;
+-a) tf=libc.tmp; tc="[0]"; tdc="[]";;
+*) tlook="^$1\$"; tf=libc.list; tc="()"; tdc="()";;
+esac;
+tx=yes;
+case "$reuseval-$4" in
+true-) ;;
+true-*) tx=no; eval "tval=\$$4"; case "$tval" in "") tx=yes;; esac;;
+esac;
+case "$tx" in
+yes)
+ case "$runnm" in
+ true)
+ if $contains $tlook $tf >/dev/null 2>&1;
+ then tval=true;
+ else tval=false;
+ fi;;
+ *)
+ echo "int main() { extern short $1$tdc; printf(\"%hd\", $1$tc); }" > t.c;
+ if $cc -o t $optimize $ccflags $ldflags t.c $libs >/dev/null 2>&1;
+ then tval=true;
+ else tval=false;
+ fi;
+ $rm -f t t.c;;
+ esac;;
+*)
+ case "$tval" in
+ $define) tval=true;;
+ *) tval=false;;
+ esac;;
+esac;
+eval "$2=$tval"'
+
+: define an is-in-libc? function
+inlibc='echo " "; td=$define; tu=$undef;
+sym=$1; var=$2; eval "was=\$$2";
+tx=yes;
+case "$reuseval$was" in
+true) ;;
+true*) tx=no;;
+esac;
+case "$tx" in
+yes)
+ set $sym tres -f;
+ eval $csym;
+ case "$tres" in
+ true)
+ echo "$sym() found." >&4;
+ case "$was" in $undef) . ./whoa; esac; eval "$var=\$td";;
+ *)
+ echo "$sym() NOT found." >&4;
+ case "$was" in $define) . ./whoa; esac; eval "$var=\$tu";;
+ esac;;
+*)
+ case "$was" in
+ $define) echo "$sym() found." >&4;;
+ *) echo "$sym() NOT found." >&4;;
+ esac;;
+esac'
+
+: see if sqrtl exists
+set sqrtl d_sqrtl
+eval $inlibc
+
+case "$ccflags" in
+*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
+esac
+
+case "$uselongdouble" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+cat <<EOM
+
+Perl can be built to take advantage of long doubles which
+(if available) may give more accuracy and range for floating point numbers.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Try to use long doubles if available?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set uselongdouble
+eval $setvar
+
+case "$uselongdouble" in
+true|[yY]*) uselongdouble="$define" ;;
+esac
+
+case "$uselongdouble" in
+$define)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that long doubles should be used,
+: we may need to set or change some other defaults.
+ if $test -f uselongdouble.cbu; then
+ echo "Your platform has some specific hints for long doubles, using them..."
+ . ./uselongdouble.cbu
+ else
+ $cat <<EOM
+(Your platform doesn't have any specific hints for long doubles.)
+EOM
+ fi
+ ;;
+esac
+
+case "$uselongdouble:$d_sqrtl" in
+$define:$undef)
+ $cat <<EOM >&4
+
+*** You requested the use of long doubles but you do not seem to have
+*** the mathematic functions for long doubles. I'm disabling the use
+*** of long doubles.
+
+EOM
+ uselongdouble=$undef
+ ;;
+esac
+
+: check for length of double
+echo " "
+case "$doublesize" in
+'')
+ echo "Checking to see how big your double precision numbers are..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof(double));
+ exit(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ doublesize=`./try`
+ echo "Your double is $doublesize bytes long."
+ else
+ dflt='8'
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a double precision number (in bytes)?"
+ . ./myread
+ doublesize="$ans"
+ fi
+ ;;
+esac
+$rm -f try.c try
+
+: check for long doubles
+echo " "
+echo "Checking to see if you have long double..." >&4
+echo 'int main() { long double x = 7.0; }' > try.c
+set try
+if eval $compile; then
+ val="$define"
+ echo "You have long double."
+else
+ val="$undef"
+ echo "You do not have long double."
+fi
+$rm try.*
+set d_longdbl
+eval $setvar
+
+: check for length of long double
+case "${d_longdbl}${longdblsize}" in
+$define)
+ echo " "
+ echo "Checking to see how big your long doubles are..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", sizeof(long double));
+}
+EOCP
+ set try
+ set try
+ if eval $compile; then
+ longdblsize=`./try$exe_ext`
+ echo "Your long doubles are $longdblsize bytes long."
+ else
+ dflt='8'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)" >&4
+ rp="What is the size of a long double (in bytes)?"
+ . ./myread
+ longdblsize="$ans"
+ fi
+ if $test "X$doublesize" = "X$longdblsize"; then
+ echo "(That isn't any different from an ordinary double.)"
+ fi
+ ;;
+esac
+$rm -f try.* try
+
+: determine the architecture name
+echo " "
+if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
+ tarch=`arch`"-$osname"
+elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
+ if uname -m > tmparch 2>&1 ; then
+ tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
+ -e 's/$/'"-$osname/" tmparch`
+ else
+ tarch="$osname"
+ fi
+ $rm -f tmparch
+else
+ tarch="$osname"
+fi
+case "$myarchname" in
+''|"$tarch") ;;
+*)
+ echo "(Your architecture name used to be $myarchname.)"
+ archname=''
+ ;;
+esac
+myarchname="$tarch"
+case "$archname" in
+'') dflt="$tarch";;
+*) dflt="$archname";;
+esac
+rp='What is your architecture name'
+. ./myread
+archname="$ans"
+case "$usethreads" in
+$define)
+ echo "Threads selected." >&4
+ case "$archname" in
+ *-thread*) echo "...and architecture name already has -thread." >&4
+ ;;
+ *) archname="$archname-thread"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+esac
+case "$usemultiplicity" in
+$define)
+ echo "Multiplicity selected." >&4
+ case "$archname" in
+ *-multi*) echo "...and architecture name already has -multi." >&4
+ ;;
+ *) archname="$archname-multi"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+esac
+case "$use64bitint$use64bitall" in
+*"$define"*)
+ case "$archname64" in
+ '')
+ echo "This architecture is naturally 64-bit, not changing architecture name." >&4
+ ;;
+ *)
+ case "$use64bitint" in
+ "$define") echo "64 bit integers selected." >&4 ;;
+ esac
+ case "$use64bitall" in
+ "$define") echo "Maximal 64 bitness selected." >&4 ;;
+ esac
+ case "$archname" in
+ *-$archname64*) echo "...and architecture name already has $archname64." >&4
+ ;;
+ *) archname="$archname-$archname64"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+ esac
+esac
+case "$uselongdouble" in
+$define)
+ echo "Long doubles selected." >&4
+ case "$longdblsize" in
+ $doublesize)
+ "...but long doubles are equal to doubles, not changing architecture name." >&4
+ ;;
+ *)
+ case "$archname" in
+ *-ld*) echo "...and architecture name already has -ld." >&4
+ ;;
+ *) archname="$archname-ld"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+: determine root of directory hierarchy where package will be installed.
+case "$prefix" in
+'')
+ dflt=`./loc . /usr/local /usr/local /local /opt /usr`
+ ;;
+*)
+ dflt="$prefix"
+ ;;
+esac
+$cat <<EOM
+
+By default, $package will be installed in $dflt/bin, manual pages
+under $dflt/man, etc..., i.e. with $dflt as prefix for all
+installation directories. Typically this is something like /usr/local.
+If you wish to have binaries under /usr/bin but other parts of the
+installation under /usr/local, that's ok: you will be prompted
+separately for each of the installation directories, the prefix being
+only used to set the defaults.
+
+EOM
+fn=d~
+rp='Installation prefix to use?'
+. ./getfile
+oldprefix=''
+case "$prefix" in
+'') ;;
+*)
+ case "$ans" in
+ "$prefix") ;;
+ *) oldprefix="$prefix";;
+ esac
+ ;;
+esac
+prefix="$ans"
+prefixexp="$ansexp"
+
+: is AFS running?
+echo " "
+case "$afs" in
+$define|true) afs=true ;;
+$undef|false) afs=false ;;
+*) if test -d /afs; then
+ afs=true
+ else
+ afs=false
+ fi
+ ;;
+esac
+if $afs; then
+ echo "AFS may be running... I'll be extra cautious then..." >&4
+else
+ echo "AFS does not seem to be running..." >&4
+fi
+
+: determine installation prefix for where package is to be installed.
+if $afs; then
+$cat <<EOM
+
+Since you are running AFS, I need to distinguish the directory in which
+files will reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
+
+EOM
+ case "$installprefix" in
+ '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installprefix";;
+ esac
+else
+$cat <<EOM
+
+In some special cases, particularly when building $package for distribution,
+it is convenient to distinguish between the directory in which files should
+be installed from the directory ($prefix) in which they
+will eventually reside. For most users, these two directories are the same.
+
+EOM
+ case "$installprefix" in
+ '') dflt=$prefix ;;
+ *) dflt=$installprefix;;
+ esac
+fi
+fn=d~
+rp='What installation prefix should I use for installing files?'
+. ./getfile
+installprefix="$ans"
+installprefixexp="$ansexp"
+
+: set the prefixit variable, to compute a suitable default value
+prefixit='case "$3" in
+""|none)
+ case "$oldprefix" in
+ "") eval "$1=\"\$$2\"";;
+ *)
+ case "$3" in
+ "") eval "$1=";;
+ none)
+ eval "tp=\"\$$2\"";
+ case "$tp" in
+ ""|" ") eval "$1=\"\$$2\"";;
+ *) eval "$1=";;
+ esac;;
+ esac;;
+ esac;;
+*)
+ eval "tp=\"$oldprefix-\$$2-\""; eval "tp=\"$tp\"";
+ case "$tp" in
+ --|/*--|\~*--) eval "$1=\"$prefix/$3\"";;
+ /*-$oldprefix/*|\~*-$oldprefix/*)
+ eval "$1=\`echo \$$2 | sed \"s,^$oldprefix,$prefix,\"\`";;
+ *) eval "$1=\"\$$2\"";;
+ esac;;
+esac'
+
+
+: get the patchlevel
+echo " "
+echo "Getting the current patchlevel..." >&4
+if $test -r $rsrc/patchlevel.h;then
+ revision=`awk '/define[ ]+PERL_REVISION/ {print $3}' $rsrc/patchlevel.h`
+ patchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
+ subversion=`awk '/define[ ]+PERL_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
+ api_revision=`awk '/define[ ]+PERL_API_REVISION/ {print $3}' $rsrc/patchlevel.h`
+ api_version=`awk '/define[ ]+PERL_API_VERSION/ {print $3}' $rsrc/patchlevel.h`
+ api_subversion=`awk '/define[ ]+PERL_API_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
+else
+ revision=0
+ patchlevel=0
+ subversion=0
+ api_revision=0
+ api_version=0
+ api_subversion=0
+fi
+$echo "(You have $package version $patchlevel subversion $subversion.)"
+case "$osname" in
+dos|vms)
+ : XXX Should be a Configure test for double-dots in filenames.
+ version=`echo $revision $patchlevel $subversion | \
+ $awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
+ api_versionstring=`echo $api_revision $api_version $api_subversion | \
+ $awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
+ ;;
+*)
+ version=`echo $revision $patchlevel $subversion | \
$awk '{ printf "%d.%d.%d\n", $1, $2, $3 }'`
api_versionstring=`echo $api_revision $api_version $api_subversion | \
$awk '{ printf "%d.%d.%d\n", $1, $2, $3 }'`
vendorprefix="$ans"
vendorprefixexp="$ansexp"
;;
-*) usevendorprefix="$undef"
- vendorprefix=''
- vendorprefixexp=''
- ;;
-esac
-
-case "$vendorprefix" in
-'') d_vendorlib="$undef"
- vendorlib=''
- vendorlibexp=''
- ;;
-*) d_vendorlib="$define"
- : determine where vendor-supplied modules go.
- : Usual default is /usr/local/lib/perl5/vendor_perl/$version
- case "$vendorlib" in
- '')
- prog=`echo $package | $sed 's/-*[0-9.]*$//'`
- case "$installstyle" in
- *lib/perl5*) dflt=$vendorprefix/lib/$package/vendor_$prog/$version ;;
- *) dflt=$vendorprefix/lib/vendor_$prog/$version ;;
- esac
- ;;
- *) dflt="$vendorlib"
- ;;
- esac
- fn=d~+
- rp='Pathname for the vendor-supplied library files?'
- . ./getfile
- vendorlib="$ans"
- vendorlibexp="$ansexp"
- ;;
-esac
-vendorlib_stem=`echo "$vendorlibexp" | sed "s,/$version$,,"`
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorlib="$vendorlibexp"
-fi
-
-case "$vendorprefix" in
-'') d_vendorarch="$undef"
- vendorarch=''
- vendorarchexp=''
- ;;
-*) d_vendorarch="$define"
- : determine where vendor-supplied architecture-dependent libraries go.
- : vendorlib default is /usr/local/lib/perl5/vendor_perl/$version
- : vendorarch default is /usr/local/lib/perl5/vendor_perl/$version/$archname
- : vendorlib may have an optional trailing /share.
- case "$vendorarch" in
- '') dflt=`echo $vendorlib | $sed 's,/share$,,'`
- dflt="$dflt/$archname"
- ;;
- *) dflt="$vendorarch" ;;
- esac
- fn=d~+
- rp='Pathname for vendor-supplied architecture-dependent files?'
- . ./getfile
- vendorarch="$ans"
- vendorarchexp="$ansexp"
- ;;
-esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorarch=`echo $vendorarchexp | sed "s#^$prefix#$installprefix#"`
-else
- installvendorarch="$vendorarchexp"
-fi
-
-: Final catch-all directories to search
-$cat <<EOM
-
-Lastly, you can have perl look in other directories for extensions and
-modules in addition to those already specified.
-These directories will be searched after
- $sitearch
- $sitelib
-EOM
-test X"$vendorlib" != "X" && echo ' ' $vendorlib
-test X"$vendorarch" != "X" && echo ' ' $vendorarch
-echo ' '
-case "$otherlibdirs" in
-''|' ') dflt='none' ;;
-*) dflt="$otherlibdirs" ;;
-esac
-$cat <<EOM
-Enter a colon-separated set of extra paths to include in perl's @INC
-search path, or enter 'none' for no extra paths.
-
-EOM
-
-rp='Colon-separated list of additional directories for perl to search?'
-. ./myread
-case "$ans" in
-' '|''|none) otherlibdirs=' ' ;;
-*) otherlibdirs="$ans" ;;
-esac
-case "$otherlibdirs" in
-' ') val=$undef ;;
-*) val=$define ;;
-esac
-set d_perl_otherlibdirs
-eval $setvar
-
-: Cruising for prototypes
-echo " "
-echo "Checking out function prototypes..." >&4
-$cat >prototype.c <<'EOCP'
-int main(int argc, char *argv[]) {
- exit(0);}
-EOCP
-if $cc $ccflags -c prototype.c >prototype.out 2>&1 ; then
- echo "Your C compiler appears to support function prototypes."
- val="$define"
-else
- echo "Your C compiler doesn't seem to understand function prototypes."
- val="$undef"
-fi
-set prototype
-eval $setvar
-$rm -f prototype*
-
-case "$prototype" in
-"$define") ;;
-*) ansi2knr='ansi2knr'
- echo " "
- cat <<EOM >&4
-
-$me: FATAL ERROR:
-This version of $package can only be compiled by a compiler that
-understands function prototypes. Unfortunately, your C compiler
- $cc $ccflags
-doesn't seem to understand them. Sorry about that.
-
-If GNU cc is available for your system, perhaps you could try that instead.
-
-Eventually, we hope to support building Perl with pre-ANSI compilers.
-If you would like to help in that effort, please contact <perlbug@perl.org>.
-
-Aborting Configure now.
-EOM
- exit 2
- ;;
-esac
-
-: determine where public executables go
-echo " "
-set dflt bin bin
-eval $prefixit
-fn=d~
-rp='Pathname where the public executables will reside?'
-. ./getfile
-if $test "X$ansexp" != "X$binexp"; then
- installbin=''
-fi
-bin="$ans"
-binexp="$ansexp"
-: Change installation prefix, if necessary.
-: XXX Bug? -- ignores Configure -Dinstallprefix setting.
-if $test X"$prefix" != X"$installprefix"; then
- installbin=`echo $binexp | sed "s#^$prefix#$installprefix#"`
-else
- installbin="$binexp"
-fi
-
-: Find perl5.005 or later.
-echo "Looking for a previously installed perl5.005 or later... "
-case "$perl5" in
-'') for tdir in `echo "$binexp:$PATH" | $sed "s/$path_sep/ /g"`; do
- : Check if this perl is recent and can load a simple module
- if $test -x $tdir/perl && $tdir/perl -Mless -e 'use 5.005;' >/dev/null 2>&1; then
- perl5=$tdir/perl
- break;
- elif $test -x $tdir/perl5 && $tdir/perl5 -Mless -e 'use 5.005;' >/dev/null 2>&1; then
- perl5=$tdir/perl
- break;
- fi
- done
- ;;
-*) perl5="$perl5"
- ;;
-esac
-case "$perl5" in
-'') echo "None found. That's ok.";;
-*) echo "Using $perl5." ;;
-esac
-
-: Determine list of previous versions to include in @INC
-$cat > getverlist <<EOPL
-#!$perl5 -w
-use File::Basename;
-\$api_versionstring = "$api_versionstring";
-\$version = "$version";
-\$stem = "$sitelib_stem";
-\$archname = "$archname";
-EOPL
- $cat >> getverlist <<'EOPL'
-# Can't have leading @ because metaconfig interprets it as a command!
-;@inc_version_list=();
-# XXX Redo to do opendir/readdir?
-if (-d $stem) {
- chdir($stem);
- ;@candidates = glob("5.*");
-}
-else {
- ;@candidates = ();
-}
-
-# XXX ToDo: These comparisons must be reworked when two-digit
-# subversions come along, so that 5.7.10 compares as greater than
-# 5.7.3! By that time, hope that 5.6.x is sufficiently
-# widespread that we can use the built-in version vectors rather
-# than reinventing them here. For 5.6.0, however, we must
-# assume this script will likely be run by 5.005_0x. --AD 1/2000.
-foreach $d (@candidates) {
- if ($d lt $version) {
- if ($d ge $api_versionstring) {
- unshift(@inc_version_list, grep { -d } "$d/$archname", $d);
- }
- elsif ($d ge "5.005") {
- unshift(@inc_version_list, grep { -d } $d);
- }
- }
- else {
- # Skip newer version. I.e. don't look in
- # 5.7.0 if we're installing 5.6.1.
- }
-}
-
-if (@inc_version_list) {
- print join(' ', @inc_version_list);
-}
-else {
- # Blank space to preserve value for next Configure run.
- print " ";
-}
-EOPL
-chmod +x getverlist
-case "$inc_version_list" in
-'') if test -x "$perl5"; then
- dflt=`$perl5 getverlist`
- else
- dflt='none'
- fi
+*) usevendorprefix="$undef"
+ vendorprefix=''
+ vendorprefixexp=''
;;
-$undef) dflt='none' ;;
-*) dflt="$inc_version_list" ;;
esac
-case "$dflt" in
-''|' ') dflt=none ;;
+
+case "$vendorprefix" in
+'') d_vendorlib="$undef"
+ vendorlib=''
+ vendorlibexp=''
+ ;;
+*) d_vendorlib="$define"
+ : determine where vendor-supplied modules go.
+ : Usual default is /usr/local/lib/perl5/vendor_perl/$version
+ case "$vendorlib" in
+ '')
+ prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+ case "$installstyle" in
+ *lib/perl5*) dflt=$vendorprefix/lib/$package/vendor_$prog/$version ;;
+ *) dflt=$vendorprefix/lib/vendor_$prog/$version ;;
+ esac
+ ;;
+ *) dflt="$vendorlib"
+ ;;
+ esac
+ fn=d~+
+ rp='Pathname for the vendor-supplied library files?'
+ . ./getfile
+ vendorlib="$ans"
+ vendorlibexp="$ansexp"
+ ;;
esac
-$cat <<'EOM'
+vendorlib_stem=`echo "$vendorlibexp" | sed "s,/$version$,,"`
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
+else
+ installvendorlib="$vendorlibexp"
+fi
-In order to ease the process of upgrading, this version of perl
-can be configured to use modules built and installed with earlier
-versions of perl that were installed under $prefix. Specify here
-the list of earlier versions that this version of perl should check.
-If Configure detected no earlier versions of perl installed under
-$prefix, then the list will be empty. Answer 'none' to tell perl
-to not search earlier versions.
+case "$vendorprefix" in
+'') d_vendorarch="$undef"
+ vendorarch=''
+ vendorarchexp=''
+ ;;
+*) d_vendorarch="$define"
+ : determine where vendor-supplied architecture-dependent libraries go.
+ : vendorlib default is /usr/local/lib/perl5/vendor_perl/$version
+ : vendorarch default is /usr/local/lib/perl5/vendor_perl/$version/$archname
+ : vendorlib may have an optional trailing /share.
+ case "$vendorarch" in
+ '') dflt=`echo $vendorlib | $sed 's,/share$,,'`
+ dflt="$dflt/$archname"
+ ;;
+ *) dflt="$vendorarch" ;;
+ esac
+ fn=d~+
+ rp='Pathname for vendor-supplied architecture-dependent files?'
+ . ./getfile
+ vendorarch="$ans"
+ vendorarchexp="$ansexp"
+ ;;
+esac
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorarch=`echo $vendorarchexp | sed "s#^$prefix#$installprefix#"`
+else
+ installvendorarch="$vendorarchexp"
+fi
+
+: Final catch-all directories to search
+$cat <<EOM
+
+Lastly, you can have perl look in other directories for extensions and
+modules in addition to those already specified.
+These directories will be searched after
+ $sitearch
+ $sitelib
+EOM
+test X"$vendorlib" != "X" && echo ' ' $vendorlib
+test X"$vendorarch" != "X" && echo ' ' $vendorarch
+echo ' '
+case "$otherlibdirs" in
+''|' ') dflt='none' ;;
+*) dflt="$otherlibdirs" ;;
+esac
+$cat <<EOM
+Enter a colon-separated set of extra paths to include in perl's @INC
+search path, or enter 'none' for no extra paths.
-The default should almost always be sensible, so if you're not sure,
-just accept the default.
EOM
-rp='List of earlier versions to include in @INC?'
+rp='Colon-separated list of additional directories for perl to search?'
. ./myread
case "$ans" in
-[Nn]one|''|' ') inc_version_list=' ' ;;
-*) inc_version_list="$ans" ;;
+' '|''|none) otherlibdirs=' ' ;;
+*) otherlibdirs="$ans" ;;
esac
-case "$inc_version_list" in
-''|' ')
- inc_version_list_init='0';;
-*) inc_version_list_init=`echo $inc_version_list |
- $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
- ;;
+case "$otherlibdirs" in
+' ') val=$undef ;;
+*) val=$define ;;
esac
-$rm -f getverlist
-
-: determine whether to install perl also as /usr/bin/perl
-
-echo " "
-if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
- $cat <<EOM
-Many scripts expect perl to be installed as /usr/bin/perl.
-I can install the perl you are about to compile also as /usr/bin/perl
-(in addition to $installbin/perl).
-EOM
- case "$installusrbinperl" in
- "$undef"|[nN]*) dflt='n';;
- *) dflt='y';;
- esac
- rp="Do you want to install perl as /usr/bin/perl?"
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef" ;;
- esac
-else
- val="$undef"
-fi
-set installusrbinperl
+set d_perl_otherlibdirs
eval $setvar
+: Cruising for prototypes
echo " "
-echo "Checking for GNU C Library..." >&4
-cat >gnulibc.c <<EOM
-#include <stdio.h>
-int main()
-{
-#ifdef __GLIBC__
- exit(0);
-#else
- exit(1);
-#endif
-}
-EOM
-set gnulibc
-if eval $compile_ok && ./gnulibc; then
+echo "Checking out function prototypes..." >&4
+$cat >prototype.c <<'EOCP'
+int main(int argc, char *argv[]) {
+ exit(0);}
+EOCP
+if $cc $ccflags -c prototype.c >prototype.out 2>&1 ; then
+ echo "Your C compiler appears to support function prototypes."
val="$define"
- echo "You are using the GNU C Library"
else
+ echo "Your C compiler doesn't seem to understand function prototypes."
val="$undef"
- echo "You are not using the GNU C Library"
fi
-$rm -f gnulibc*
-set d_gnulibc
+set prototype
eval $setvar
+$rm -f prototype*
-: see if nm is to be used to determine whether a symbol is defined or not
-case "$usenm" in
-'')
- dflt=''
- case "$d_gnulibc" in
- "$define")
- echo " "
- echo "nm probably won't work on the GNU C Library." >&4
- dflt=n
- ;;
- esac
- case "$dflt" in
- '')
- if $test "$osname" = aix -a ! -f /lib/syscalls.exp; then
- echo " "
- echo "Whoops! This is an AIX system without /lib/syscalls.exp!" >&4
- echo "'nm' won't be sufficient on this sytem." >&4
- dflt=n
- fi
- ;;
- esac
- case "$dflt" in
- '') dflt=`$egrep 'inlibc|csym' $rsrc/Configure | wc -l 2>/dev/null`
- if $test $dflt -gt 20; then
- dflt=y
- else
- dflt=n
- fi
- ;;
- esac
- ;;
-*)
- case "$usenm" in
- true|$define) dflt=y;;
- *) dflt=n;;
- esac
- ;;
-esac
-$cat <<EOM
-
-I can use $nm to extract the symbols from your C libraries. This
-is a time consuming task which may generate huge output on the disk (up
-to 3 megabytes) but that should make the symbols extraction faster. The
-alternative is to skip the 'nm' extraction part and to compile a small
-test program instead to determine whether each symbol is present. If
-you have a fast C compiler and/or if your 'nm' output cannot be parsed,
-this may be the best solution.
-
-You probably shouldn't let me use 'nm' if you are using the GNU C Library.
+case "$prototype" in
+"$define") ;;
+*) ansi2knr='ansi2knr'
+ echo " "
+ cat <<EOM >&4
-EOM
-rp="Shall I use $nm to extract C symbols from the libraries?"
-. ./myread
-case "$ans" in
-[Nn]*) usenm=false;;
-*) usenm=true;;
-esac
+$me: FATAL ERROR:
+This version of $package can only be compiled by a compiler that
+understands function prototypes. Unfortunately, your C compiler
+ $cc $ccflags
+doesn't seem to understand them. Sorry about that.
-runnm=$usenm
-case "$reuseval" in
-true) runnm=false;;
-esac
+If GNU cc is available for your system, perhaps you could try that instead.
-: nm options which may be necessary
-case "$nm_opt" in
-'') if $test -f /mach_boot; then
- nm_opt='' # Mach
- elif $test -d /usr/ccs/lib; then
- nm_opt='-p' # Solaris (and SunOS?)
- elif $test -f /dgux; then
- nm_opt='-p' # DG-UX
- elif $test -f /lib64/rld; then
- nm_opt='-p' # 64-bit Irix
- else
- nm_opt=''
- fi;;
-esac
+Eventually, we hope to support building Perl with pre-ANSI compilers.
+If you would like to help in that effort, please contact <perlbug@perl.org>.
-: nm options which may be necessary for shared libraries but illegal
-: for archive libraries. Thank you, Linux.
-case "$nm_so_opt" in
-'') case "$myuname" in
- *linux*)
- if $nm --help | $grep 'dynamic' > /dev/null 2>&1; then
- nm_so_opt='--dynamic'
- fi
- ;;
- esac
+Aborting Configure now.
+EOM
+ exit 2
;;
esac
-case "$runnm" in
-true)
-: get list of predefined functions in a handy place
+: determine where public executables go
echo " "
-case "$libc" in
-'') libc=unknown
- case "$libs" in
- *-lc_s*) libc=`./loc libc_s$_a $libc $libpth`
- esac
- ;;
-esac
-libnames='';
-case "$libs" in
-'') ;;
-*) for thislib in $libs; do
- case "$thislib" in
- -lc|-lc_s)
- : Handle C library specially below.
- ;;
- -l*)
- thislib=`echo $thislib | $sed -e 's/^-l//'`
- if try=`./loc lib$thislib.$so.'*' X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib$_a X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc $thislib$_a X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$try"; then
- :
- else
- try=''
+set dflt bin bin
+eval $prefixit
+fn=d~
+rp='Pathname where the public executables will reside?'
+. ./getfile
+if $test "X$ansexp" != "X$binexp"; then
+ installbin=''
+fi
+bin="$ans"
+binexp="$ansexp"
+: Change installation prefix, if necessary.
+: XXX Bug? -- ignores Configure -Dinstallprefix setting.
+if $test X"$prefix" != X"$installprefix"; then
+ installbin=`echo $binexp | sed "s#^$prefix#$installprefix#"`
+else
+ installbin="$binexp"
+fi
+
+: Find perl5.005 or later.
+echo "Looking for a previously installed perl5.005 or later... "
+case "$perl5" in
+'') for tdir in `echo "$binexp:$PATH" | $sed "s/$path_sep/ /g"`; do
+ : Check if this perl is recent and can load a simple module
+ if $test -x $tdir/perl && $tdir/perl -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
+ elif $test -x $tdir/perl5 && $tdir/perl5 -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
fi
- libnames="$libnames $try"
- ;;
- *) libnames="$libnames $thislib" ;;
- esac
- done
- ;;
-esac
-xxx=normal
-case "$libc" in
-unknown)
- set /lib/libc.$so
- for xxx in $libpth; do
- $test -r $1 || set $xxx/libc.$so
- : The messy sed command sorts on library version numbers.
- $test -r $1 || \
- set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
- tr ' ' $trnl | egrep -v '\.[A-Za-z]*$' | $sed -e '
- h
- s/[0-9][0-9]*/0000&/g
- s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
- G
- s/\n/ /' | \
- sort | $sed -e 's/^.* //'`
- eval set \$$#
done
- $test -r $1 || set /usr/ccs/lib/libc.$so
- $test -r $1 || set /lib/libsys_s$_a
;;
-*)
- set blurfl
+*) perl5="$perl5"
;;
esac
-if $test -r "$1"; then
- echo "Your (shared) C library seems to be in $1."
- libc="$1"
-elif $test -r /lib/libc && $test -r /lib/clib; then
- echo "Your C library seems to be in both /lib/clib and /lib/libc."
- xxx=apollo
- libc='/lib/clib /lib/libc'
- if $test -r /lib/syslib; then
- echo "(Your math library is in /lib/syslib.)"
- libc="$libc /lib/syslib"
- fi
-elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
- echo "Your C library seems to be in $libc, as you said before."
-elif $test -r $incpath/usr/lib/libc$_a; then
- libc=$incpath/usr/lib/libc$_a;
- echo "Your C library seems to be in $libc. That's fine."
-elif $test -r /lib/libc$_a; then
- libc=/lib/libc$_a;
- echo "Your C library seems to be in $libc. You're normal."
-else
- if tans=`./loc libc$_a blurfl/dyick $libpth`; $test -r "$tans"; then
- :
- elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
- libnames="$libnames "`./loc clib blurfl/dyick $libpth`
- elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
- :
- elif tans=`./loc Slibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
- :
- elif tans=`./loc Mlibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
- :
- else
- tans=`./loc Llibc$_a blurfl/dyick $xlibpth`
- fi
- if $test -r "$tans"; then
- echo "Your C library seems to be in $tans, of all places."
- libc=$tans
- else
- libc='blurfl'
- fi
-fi
-if $test $xxx = apollo -o -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
- dflt="$libc"
- cat <<EOM
+case "$perl5" in
+'') echo "None found. That's ok.";;
+*) echo "Using $perl5." ;;
+esac
-If the guess above is wrong (which it might be if you're using a strange
-compiler, or your machine supports multiple models), you can override it here.
+: Determine list of previous versions to include in @INC
+$cat > getverlist <<EOPL
+#!$perl5 -w
+use File::Basename;
+\$api_versionstring = "$api_versionstring";
+\$version = "$version";
+\$stem = "$sitelib_stem";
+\$archname = "$archname";
+EOPL
+ $cat >> getverlist <<'EOPL'
+# Can't have leading @ because metaconfig interprets it as a command!
+;@inc_version_list=();
+# XXX Redo to do opendir/readdir?
+if (-d $stem) {
+ chdir($stem);
+ ;@candidates = glob("5.*");
+}
+else {
+ ;@candidates = ();
+}
-EOM
-else
- dflt=''
- echo $libpth | tr ' ' $trnl | sort | uniq > libpath
- cat >&4 <<EOM
-I can't seem to find your C library. I've looked in the following places:
+# XXX ToDo: These comparisons must be reworked when two-digit
+# subversions come along, so that 5.7.10 compares as greater than
+# 5.7.3! By that time, hope that 5.6.x is sufficiently
+# widespread that we can use the built-in version vectors rather
+# than reinventing them here. For 5.6.0, however, we must
+# assume this script will likely be run by 5.005_0x. --AD 1/2000.
+foreach $d (@candidates) {
+ if ($d lt $version) {
+ if ($d ge $api_versionstring) {
+ unshift(@inc_version_list, grep { -d } "$d/$archname", $d);
+ }
+ elsif ($d ge "5.005") {
+ unshift(@inc_version_list, grep { -d } $d);
+ }
+ }
+ else {
+ # Skip newer version. I.e. don't look in
+ # 5.7.0 if we're installing 5.6.1.
+ }
+}
-EOM
- $sed 's/^/ /' libpath
- cat <<EOM
+if (@inc_version_list) {
+ print join(' ', @inc_version_list);
+}
+else {
+ # Blank space to preserve value for next Configure run.
+ print " ";
+}
+EOPL
+chmod +x getverlist
+case "$inc_version_list" in
+'') if test -x "$perl5"; then
+ dflt=`$perl5 getverlist`
+ else
+ dflt='none'
+ fi
+ ;;
+$undef) dflt='none' ;;
+*) dflt="$inc_version_list" ;;
+esac
+case "$dflt" in
+''|' ') dflt=none ;;
+esac
+case "$dflt" in
+5.005) case "$bincompat5005" in
+ $define|true|[yY]*) ;;
+ *) dflt=none ;;
+ esac
+ ;;
+esac
+$cat <<'EOM'
-None of these seems to contain your C library. I need to get its name...
+In order to ease the process of upgrading, this version of perl
+can be configured to use modules built and installed with earlier
+versions of perl that were installed under $prefix. Specify here
+the list of earlier versions that this version of perl should check.
+If Configure detected no earlier versions of perl installed under
+$prefix, then the list will be empty. Answer 'none' to tell perl
+to not search earlier versions.
+The default should almost always be sensible, so if you're not sure,
+just accept the default.
EOM
-fi
-fn=f
-rp='Where is your C library?'
-. ./getfile
-libc="$ans"
-echo " "
-echo $libc $libnames | tr ' ' $trnl | sort | uniq > libnames
-set X `cat libnames`
-shift
-xxx=files
-case $# in 1) xxx=file; esac
-echo "Extracting names from the following $xxx for later perusal:" >&4
-echo " "
-$sed 's/^/ /' libnames >&4
-echo " "
-$echo $n "This may take a while...$c" >&4
+rp='List of earlier versions to include in @INC?'
+. ./myread
+case "$ans" in
+[Nn]one|''|' ') inc_version_list=' ' ;;
+*) inc_version_list="$ans" ;;
+esac
+case "$inc_version_list" in
+''|' ')
+ inc_version_list_init='0';;
+*) inc_version_list_init=`echo $inc_version_list |
+ $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
+ ;;
+esac
+$rm -f getverlist
+
+: determine whether to install perl also as /usr/bin/perl
-for file in $*; do
- case $file in
- *$so*) $nm $nm_so_opt $nm_opt $file 2>/dev/null;;
- *) $nm $nm_opt $file 2>/dev/null;;
+echo " "
+if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
+ $cat <<EOM
+Many scripts expect perl to be installed as /usr/bin/perl.
+I can install the perl you are about to compile also as /usr/bin/perl
+(in addition to $installbin/perl).
+EOM
+ case "$installusrbinperl" in
+ "$undef"|[nN]*) dflt='n';;
+ *) dflt='y';;
+ esac
+ rp="Do you want to install perl as /usr/bin/perl?"
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef" ;;
esac
-done >libc.tmp
-
-$echo $n ".$c"
-$grep fprintf libc.tmp > libc.ptf
-xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
-xrun='eval "<libc.tmp $com >libc.list"; echo "done" >&4'
-xxx='[ADTSIW]'
-if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *_[_.]*//p' -e 's/^.* $xxx *//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^__*//' -e 's/^\([a-zA-Z_0-9$]*\).*xtern.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e '/|UNDEF/d' -e '/FUNC..GL/s/^.*|__*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.* D __*//p' -e 's/^.* D //p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^_//' -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$grep '|' | $sed -n -e '/|COMMON/d' -e '/|DATA/d' \
- -e '/ file/d' -e 's/^\([^ ]*\).*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p' -e 's/^.*|FUNC |WEAK .*|//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^__//' -e '/|Undef/d' -e '/|Proc/s/ .*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|Proc .*|Text *| *//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^[-0-9a-f ]*_\(.*\)=.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/.*\.text n\ \ \ \.//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="sed -n -e 's/^__.*//' -e 's/[ ]*D[ ]*[0-9]*.*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
else
- $nm -p $* 2>/dev/null >libc.tmp
- $grep fprintf libc.tmp > libc.ptf
- if com="$sed -n -e 's/^.* [ADTSIW] *_[_.]*//p' -e 's/^.* [ADTSIW] //p'";\
- eval $xscan; $contains '^fprintf$' libc.list >/dev/null 2>&1
- then
- nm_opt='-p'
- eval $xrun
- else
- echo " "
- echo "$nm didn't seem to work right. Trying $ar instead..." >&4
- com=''
- if $ar t $libc > libc.tmp && $contains '^fprintf$' libc.tmp >/dev/null 2>&1; then
- for thisname in $libnames $libc; do
- $ar t $thisname >>libc.tmp
- done
- $sed -e "s/\\$_o\$//" < libc.tmp > libc.list
- echo "Ok." >&4
- elif test "X$osname" = "Xos2" && $ar tv $libc > libc.tmp; then
- # Repeat libc to extract forwarders to DLL entries too
- for thisname in $libnames $libc; do
- $ar tv $thisname >>libc.tmp
- # Revision 50 of EMX has bug in $ar.
- # it will not extract forwarders to DLL entries
- # Use emximp which will extract exactly them.
- emximp -o tmp.imp $thisname \
- 2>/dev/null && \
- $sed -e 's/^\([_a-zA-Z0-9]*\) .*$/\1/p' \
- < tmp.imp >>libc.tmp
- $rm tmp.imp
- done
- $sed -e "s/\\$_o\$//" -e 's/^ \+//' < libc.tmp > libc.list
- echo "Ok." >&4
- else
- echo "$ar didn't seem to work right." >&4
- echo "Maybe this is a Cray...trying bld instead..." >&4
- if bld t $libc | $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" > libc.list
- then
- for thisname in $libnames; do
- bld t $libnames | \
- $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" >>libc.list
- $ar t $thisname >>libc.tmp
- done
- echo "Ok." >&4
- else
- echo "That didn't work either. Giving up." >&4
- exit 1
- fi
- fi
- fi
-fi
-nm_extract="$com"
-if $test -f /lib/syscalls.exp; then
- echo " "
- echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
- $sed -n 's/^\([^ ]*\)[ ]*syscall[0-9]*$/\1/p' /lib/syscalls.exp >>libc.list
+ val="$undef"
fi
-;;
-esac
-$rm -f libnames libpath
+set installusrbinperl
+eval $setvar
: see if dld is available
set dld.h i_dld
eval $inhdr
-: is a C symbol defined?
-csym='tlook=$1;
-case "$3" in
--v) tf=libc.tmp; tc=""; tdc="";;
--a) tf=libc.tmp; tc="[0]"; tdc="[]";;
-*) tlook="^$1\$"; tf=libc.list; tc="()"; tdc="()";;
-esac;
-tx=yes;
-case "$reuseval-$4" in
-true-) ;;
-true-*) tx=no; eval "tval=\$$4"; case "$tval" in "") tx=yes;; esac;;
-esac;
-case "$tx" in
-yes)
- case "$runnm" in
- true)
- if $contains $tlook $tf >/dev/null 2>&1;
- then tval=true;
- else tval=false;
- fi;;
- *)
- echo "int main() { extern short $1$tdc; printf(\"%hd\", $1$tc); }" > t.c;
- if $cc $optimize $ccflags $ldflags -o t t.c $libs >/dev/null 2>&1;
- then tval=true;
- else tval=false;
- fi;
- $rm -f t t.c;;
- esac;;
-*)
- case "$tval" in
- $define) tval=true;;
- *) tval=false;;
- esac;;
-esac;
-eval "$2=$tval"'
-
-: define an is-in-libc? function
-inlibc='echo " "; td=$define; tu=$undef;
-sym=$1; var=$2; eval "was=\$$2";
-tx=yes;
-case "$reuseval$was" in
-true) ;;
-true*) tx=no;;
-esac;
-case "$tx" in
-yes)
- set $sym tres -f;
- eval $csym;
- case "$tres" in
- true)
- echo "$sym() found." >&4;
- case "$was" in $undef) . ./whoa; esac; eval "$var=\$td";;
- *)
- echo "$sym() NOT found." >&4;
- case "$was" in $define) . ./whoa; esac; eval "$var=\$tu";;
- esac;;
-*)
- case "$was" in
- $define) echo "$sym() found." >&4;;
- *) echo "$sym() NOT found." >&4;;
- esac;;
-esac'
-
: see if dlopen exists
xxx_runnm="$runnm"
runnm=false
hpux) dflt='+z' ;;
next) dflt='none' ;;
irix*) dflt='-KPIC' ;;
- svr4*|esix*|solaris) dflt='-KPIC' ;;
+ svr4*|esix*|solaris|nonstopux) dflt='-KPIC' ;;
sunos) dflt='-pic' ;;
*) dflt='none' ;;
esac
;;
*) case "$osname" in
- svr4*|esix*|solaris) dflt='-fPIC' ;;
+ svr4*|esix*|solaris|nonstopux) dflt='-fPIC' ;;
*) dflt='-fpic' ;;
esac ;;
esac ;;
next) dflt='none' ;;
solaris) dflt='-G' ;;
sunos) dflt='-assert nodefinitions' ;;
- svr4*|esix*) dflt="-G $ldflags" ;;
+ svr4*|esix*|nonstopux) dflt="-G $ldflags" ;;
*) dflt='none' ;;
esac
;;
esac
for thisflag in $ldflags; do
case "$thisflag" in
- -L*)
+ -L*|-R*)
case " $dflt " in
*" $thisflag "*) ;;
*) dflt="$dflt $thisflag" ;;
;;
*) case "$useshrplib" in
'') case "$osname" in
- svr4*|dgux|dynixptx|esix|powerux|beos|cygwin*)
+ svr4*|nonstopux|dgux|dynixptx|esix|powerux|beos|cygwin*)
dflt=y
also='Building a shared libperl is required for dynamic loading to work on your system.'
;;
*) $cat >&4 <<EOM
WARNING: Use of the shrpdir variable for the installation location of
the shared $libperl is not supported. It was never documented and
-will not work in this version. Let me (perlbug@perl.com)
+will not work in this version. Let me (perlbug@perl.org)
know of any problems this may cause.
EOM
none) ldlibpthname='' ;;
esac
+: determine where manual pages are on this system
+echo " "
+case "$sysman" in
+'')
+ syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
+ syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
+ syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
+ syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
+ syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
+ sysman=`./loc . /usr/man/man1 $syspath`
+ ;;
+esac
+if $test -d "$sysman"; then
+ echo "System manual is in $sysman." >&4
+else
+ echo "Could not find manual pages in source form." >&4
+fi
+
: determine where manual pages go
set man1dir man1dir none
eval $prefixit
/[ ]$myhostname[ . ]/p" > hosts
}
tmp_re="[ . ]"
- $test x`$awk "/[0-9].*[ ]$myhostname$tmp_re/ { sum++ }
+ if $test -f hosts; then
+ $test x`$awk "/[0-9].*[ ]$myhostname$tmp_re/ { sum++ }
END { print sum }" hosts` = x1 || tmp_re="[ ]"
- dflt=.`$awk "/[0-9].*[ ]$myhostname$tmp_re/ {for(i=2; i<=NF;i++) print \\\$i}" \
- hosts | $sort | $uniq | \
- $sed -n -e "s/$myhostname\.\([-a-zA-Z0-9_.]\)/\1/p"`
- case `$echo X$dflt` in
- X*\ *) echo "(Several hosts in /etc/hosts matched hostname)"
+ dflt=.`$awk "/[0-9].*[ ]$myhostname$tmp_re/ {for(i=2; i<=NF;i++) print \\\$i}" \
+ hosts | $sort | $uniq | \
+ $sed -n -e "s/$myhostname\.\([-a-zA-Z0-9_.]\)/\1/p"`
+ case `$echo X$dflt` in
+ X*\ *) echo "(Several hosts in the database matched hostname)"
+ dflt=.
+ ;;
+ X.) echo "(You do not have fully-qualified names in the hosts database)"
+ ;;
+ esac
+ else
+ echo "(I cannot locate a hosts database anywhere)"
dflt=.
- ;;
- X.) echo "(You do not have fully-qualified names in /etc/hosts)"
- ;;
- esac
+ fi
case "$dflt" in
.)
tans=`./loc resolv.conf X /etc /usr/etc`
If you or somebody else will be maintaining perl at your site, please
fill in the correct e-mail address here so that they may be contacted
if necessary. Currently, the "perlbug" program included with perl
-will send mail to this address in addition to perlbug@perl.com. You may
+will send mail to this address in addition to perlbug@perl.org. You may
enter "none" for no administrator.
EOM
. ./myread
perladmin="$ans"
+: determine whether to only install version-specific parts.
+echo " "
+$cat <<EOM
+Do you want to install only the version-specific parts of the perl
+distribution? Usually you do *not* want to do this.
+EOM
+case "$versiononly" in
+"$define"|[Yy]*|true) dflt='y' ;;
+*) dflt='n';
+esac
+rp="Do you want to install only the version-specific parts of perl?"
+. ./myread
+case "$ans" in
+[yY]*) val="$define";;
+*) val="$undef" ;;
+esac
+set versiononly
+eval $setvar
+
: figure out how to guarantee perl startup
case "$startperl" in
'')
a shell by starting the script with a single ':' character.
EOH
- dflt="$binexp/perl"
+ case "$versiononly" in
+ "$define") dflt="$binexp/perl$version";;
+ *) dflt="$binexp/perl";;
+ esac
rp='What shall I put after the #! to start up perl ("none" to not use #!)?'
. ./myread
case "$ans" in
installsitebin="$sitebinexp"
fi
-: see if sqrtl exists
-set sqrtl d_sqrtl
-eval $inlibc
-
-case "$ccflags" in
-*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
-esac
-
-case "$uselongdouble" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-cat <<EOM
-
-Perl can be built to take advantage of long doubles which
-(if available) may give more accuracy and range for floating point numbers.
-
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Try to use long doubles if available?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
-esac
-set uselongdouble
-eval $setvar
-
-case "$uselongdouble" in
-true|[yY]*) uselongdouble="$define" ;;
-esac
-
-case "$uselongdouble" in
-$define)
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that long doubles should be used,
-: we may need to set or change some other defaults.
- if $test -f uselongdouble.cbu; then
- echo "Your platform has some specific hints for long doubles, using them..."
- . ./uselongdouble.cbu
- else
- $cat <<EOM
-(Your platform doesn't have any specific hints for long doubles.)
-EOM
- fi
- ;;
-esac
-
-case "$uselongdouble:$d_sqrtl" in
-$define:$undef)
- $cat <<EOM >&4
-
-*** You requested the use of long doubles but you do not seem to have
-*** the mathematic functions for long doubles. I'm disabling the use
-*** of long doubles.
-
-EOM
- uselongdouble=$undef
- ;;
-esac
-
case "$useperlio" in
$define|true|[yY]*) dflt='y';;
*) dflt='n';;
set qgcvt d_qgcvt
eval $inlibc
-: check for length of double
-echo " "
-case "$doublesize" in
-'')
- echo "Checking to see how big your double precision numbers are..." >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", (int)sizeof(double));
- exit(0);
-}
-EOCP
- set try
- if eval $compile_ok; then
- doublesize=`./try`
- echo "Your double is $doublesize bytes long."
- else
- dflt='8'
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of a double precision number (in bytes)?"
- . ./myread
- doublesize="$ans"
- fi
- ;;
-esac
-$rm -f try.c try
-
-: check for long doubles
-echo " "
-echo "Checking to see if you have long double..." >&4
-echo 'int main() { long double x = 7.0; }' > try.c
-set try
-if eval $compile; then
- val="$define"
- echo "You have long double."
-else
- val="$undef"
- echo "You do not have long double."
-fi
-$rm try.*
-set d_longdbl
-eval $setvar
-
-: check for length of long double
-case "${d_longdbl}${longdblsize}" in
-$define)
- echo " "
- echo "Checking to see how big your long doubles are..." >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof(long double));
-}
-EOCP
- set try
- set try
- if eval $compile; then
- longdblsize=`./try$exe_ext`
- echo "Your long doubles are $longdblsize bytes long."
- else
- dflt='8'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)" >&4
- rp="What is the size of a long double (in bytes)?"
- . ./myread
- longdblsize="$ans"
- fi
- if $test "X$doublesize" = "X$longdblsize"; then
- echo "(That isn't any different from an ordinary double.)"
- fi
- ;;
-esac
-$rm -f try.* try
-
echo " "
if $test X"$d_longdbl" = X"$define"; then
case "$yyy" in
123.456)
sPRIfldbl='"f"'; sPRIgldbl='"g"'; sPRIeldbl='"e"';
- sPRIFldbl='"F"'; sPRIGldbl='"G"'; sPRIEldbl='"E"';
+ sPRIFUldbl='"F"'; sPRIGUldbl='"G"'; sPRIEUldbl='"E"';
echo "We will use %f."
;;
esac
case "$yyy" in
123.456)
sPRIfldbl='"llf"'; sPRIgldbl='"llg"'; sPRIeldbl='"lle"';
- sPRIFldbl='"llF"'; sPRIGldbl='"llG"'; sPRIEldbl='"llE"';
+ sPRIFUldbl='"llF"'; sPRIGUldbl='"llG"'; sPRIEUldbl='"llE"';
echo "We will use %llf."
;;
esac
case "$yyy" in
123.456)
sPRIfldbl='"Lf"'; sPRIgldbl='"Lg"'; sPRIeldbl='"Le"';
- sPRIFldbl='"LF"'; sPRIGldbl='"LG"'; sPRIEldbl='"LE"';
+ sPRIFUldbl='"LF"'; sPRIGUldbl='"LG"'; sPRIEUldbl='"LE"';
echo "We will use %Lf."
;;
esac
case "$yyy" in
123.456)
sPRIfldbl='"lf"'; sPRIgldbl='"lg"'; sPRIeldbl='"le"';
- sPRIFldbl='"lF"'; sPRIGldbl='"lG"'; sPRIEldbl='"lE"';
+ sPRIFUldbl='"lF"'; sPRIGUldbl='"lG"'; sPRIEUldbl='"lE"';
echo "We will use %lf."
;;
esac
if $test X"$sPRIfldbl" = X; then
echo "Cannot figure out how to print long doubles." >&4
+else
+ sSCNfldbl=$sPRIfldbl # expect consistency
fi
$rm -f try try.*
case "$sPRIfldbl" in
'') d_PRIfldbl="$undef"; d_PRIgldbl="$undef"; d_PRIeldbl="$undef";
- d_PRIFldbl="$undef"; d_PRIGldbl="$undef"; d_PRIEldbl="$undef";
+ d_PRIFUldbl="$undef"; d_PRIGUldbl="$undef"; d_PRIEUldbl="$undef";
+ d_SCNfldbl="$undef";
;;
*) d_PRIfldbl="$define"; d_PRIgldbl="$define"; d_PRIeldbl="$define";
- d_PRIFldbl="$define"; d_PRIGldbl="$define"; d_PRIEldbl="$define";
+ d_PRIFUldbl="$define"; d_PRIGUldbl="$define"; d_PRIEUldbl="$define";
+ d_SCNfldbl="$define";
;;
esac
: Check how to convert floats to strings.
-if test "X$d_Gconvert" = X; then
- echo " "
- echo "Checking for an efficient way to convert floats to strings."
- echo " " > try.c
- case "$uselongdouble" in
- "$define") echo "#define USE_LONG_DOUBLE" >>try.c ;;
- esac
- case "$d_longdbl" in
- "$define") echo "#define HAS_LONG_DOUBLE" >>try.c ;;
- esac
- case "$d_PRIgldbl" in
- "$define") echo "#define HAS_PRIgldbl" >>try.c ;;
- esac
- $cat >>try.c <<EOP
+echo " "
+echo "Checking for an efficient way to convert floats to strings."
+echo " " > try.c
+case "$uselongdouble" in
+"$define") echo "#define USE_LONG_DOUBLE" >>try.c ;;
+esac
+case "$d_longdbl" in
+"$define") echo "#define HAS_LONG_DOUBLE" >>try.c ;;
+esac
+case "$d_PRIgldbl" in
+"$define") echo "#define HAS_PRIgldbl" >>try.c ;;
+esac
+$cat >>try.c <<EOP
#ifdef TRY_gconvert
#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
char *myname = "gconvert";
Gconvert((DOUBLETYPE)-100000.0, 8, 0, buf);
checkit("-100000", buf);
+ Gconvert((DOUBLETYPE)123.456, 8, 0, buf);
+ checkit("123.456", buf);
+
exit(0);
}
EOP
- case "$d_Gconvert" in
- gconvert*) xxx_list='gconvert gcvt sprintf' ;;
- gcvt*) xxx_list='gcvt gconvert sprintf' ;;
- sprintf*) xxx_list='sprintf gconvert gcvt' ;;
- *) xxx_list='gconvert gcvt sprintf' ;;
- esac
-
- case "$d_longdbl$uselongdouble$d_qgcvt" in
- "$define$define$define") xxx_list="`echo $xxx_list|sed 's/gcvt/qgcvt gcvt/'`" ;;
- esac
+case "$d_Gconvert" in
+gconvert*) xxx_list='gconvert gcvt sprintf' ;;
+gcvt*) xxx_list='gcvt gconvert sprintf' ;;
+sprintf*) xxx_list='sprintf gconvert gcvt' ;;
+*) xxx_list='gconvert gcvt sprintf' ;;
+esac
+
+case "$d_longdbl$uselongdouble$d_PRIgldbl" in
+"$define$define$define")
+ # for long doubles prefer first qgcvt, then sprintf
+ xxx_list="`echo $xxx_list|sed s/sprintf//`"
+ xxx_list="sprintf $xxx_list"
+ case "$d_qgcvt" in
+ "$define") xxx_list="qgcvt $xxx_list" ;;
+ esac
+ ;;
+esac
- for xxx_convert in $xxx_list; do
- echo "Trying $xxx_convert..."
- $rm -f try try$_o
- set try -DTRY_$xxx_convert
- if eval $compile; then
- echo "$xxx_convert() found." >&4
- if ./try; then
- echo "I'll use $xxx_convert to convert floats into a string." >&4
- break;
- else
- echo "...But $xxx_convert didn't work as I expected."
- fi
+for xxx_convert in $xxx_list; do
+ echo "Trying $xxx_convert..."
+ $rm -f try try$_o
+ set try -DTRY_$xxx_convert
+ if eval $compile; then
+ echo "$xxx_convert() found." >&4
+ if ./try; then
+ echo "I'll use $xxx_convert to convert floats into a string." >&4
+ break;
else
- echo "$xxx_convert NOT found." >&4
+ echo "...But $xxx_convert didn't work as I expected."
fi
- done
-
- case "$xxx_convert" in
- gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
- gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
- qgcvt) d_Gconvert='qgcvt((x),(n),(b))' ;;
- *) case "$uselongdouble$d_longdbl$d_PRIgldbl" in
- "$define$define$define")
- d_Gconvert="sprintf((b),\"%.*$sPRIgldbl\",(n),(x))" ;;
- *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
- esac
- ;;
- esac
-fi
+ else
+ echo "$xxx_convert NOT found." >&4
+ fi
+done
+
+case "$xxx_convert" in
+gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
+gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
+qgcvt) d_Gconvert='qgcvt((x),(n),(b))' ;;
+*) case "$uselongdouble$d_longdbl$d_PRIgldbl" in
+ "$define$define$define")
+ d_Gconvert="sprintf((b),\"%.*\"$sPRIgldbl,(n),(x))" ;;
+ *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+ esac
+ ;;
+esac
: Initialize h_fcntl
h_fcntl=false
EOCP
: check sys/file.h first, no particular reason here
if $test `./findhdr sys/file.h` && \
- $cc $cppflags -DI_SYS_FILE -o access access.c >/dev/null 2>&1 ; then
+ $cc -o access $cppflags -DI_SYS_FILE access.c >/dev/null 2>&1 ; then
h_sysfile=true;
echo "<sys/file.h> defines the *_OK access constants." >&4
elif $test `./findhdr fcntl.h` && \
- $cc $cppflags -DI_FCNTL -o access access.c >/dev/null 2>&1 ; then
+ $cc -o access $cppflags -DI_FCNTL access.c >/dev/null 2>&1 ; then
h_fcntl=true;
echo "<fcntl.h> defines the *_OK access constants." >&4
elif $test `./findhdr unistd.h` && \
- $cc $cppflags -DI_UNISTD -o access access.c >/dev/null 2>&1 ; then
+ $cc -o access $cppflags -DI_UNISTD access.c >/dev/null 2>&1 ; then
echo "<unistd.h> defines the *_OK access constants." >&4
else
echo "I can't find the four *_OK access constants--I'll use mine." >&4
exit(1);
}
EOP
- if $cc -DTRY_BSD_PGRP $ccflags $ldflags -o set set.c $libs >/dev/null 2>&1 && ./set; then
+ if $cc -o set -DTRY_BSD_PGRP $ccflags $ldflags set.c $libs >/dev/null 2>&1 && ./set; then
echo "You have to use getpgrp(pid) instead of getpgrp()." >&4
val="$define"
- elif $cc $ccflags $ldflags -o set set.c $libs >/dev/null 2>&1 && ./set; then
+ elif $cc -o set $ccflags $ldflags set.c $libs >/dev/null 2>&1 && ./set; then
echo "You have to use getpgrp() instead of getpgrp(pid)." >&4
val="$undef"
else
exit(1);
}
EOP
- if $cc -DTRY_BSD_PGRP $ccflags $ldflags -o set set.c $libs >/dev/null 2>&1 && ./set; then
+ if $cc -o set -DTRY_BSD_PGRP $ccflags $ldflags set.c $libs >/dev/null 2>&1 && ./set; then
echo 'You have to use setpgrp(pid,pgrp) instead of setpgrp().' >&4
val="$define"
- elif $cc $ccflags $ldflags -o set set.c $libs >/dev/null 2>&1 && ./set; then
+ elif $cc -o set $ccflags $ldflags set.c $libs >/dev/null 2>&1 && ./set; then
echo 'You have to use setpgrp() instead of setpgrp(pid,pgrp).' >&4
val="$undef"
else
: Call the object file tmp-dyna.o in case dlext=o.
if $cc $ccflags $cccdlflags -c dyna.c > /dev/null 2>&1 &&
mv dyna${_o} tmp-dyna${_o} > /dev/null 2>&1 &&
- $ld $lddlflags -o dyna.$dlext tmp-dyna${_o} > /dev/null 2>&1 &&
- $cc $ccflags -o fred $ldflags $cccdlflags $ccdlflags fred.c $libs > /dev/null 2>&1; then
+ $ld -o dyna.$dlext $lddlflags tmp-dyna${_o} > /dev/null 2>&1 &&
+ $cc -o fred $ccflags $ldflags $cccdlflags $ccdlflags fred.c $libs > /dev/null 2>&1; then
xxx=`./fred`
case $xxx in
1) echo "Test program failed using dlopen." >&4
set fcntl d_fcntl
eval $inlibc
+echo " "
+: See if fcntl-based locking works.
+$cat >try.c <<'EOCP'
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+int main() {
+#if defined(F_SETLK) && defined(F_SETLKW)
+ struct flock flock;
+ int retval, fd;
+ fd = open("try.c", O_RDONLY);
+ flock.l_type = F_RDLCK;
+ flock.l_whence = SEEK_SET;
+ flock.l_start = flock.l_len = 0;
+ retval = fcntl(fd, F_SETLK, &flock);
+ close(fd);
+ (retval < 0 ? exit(2) : exit(0));
+#else
+ exit(2);
+#endif
+}
+EOCP
+echo "Checking if fcntl-based file locking works... "
+case "$d_fcntl" in
+"$define")
+ set try
+ if eval $compile_ok; then
+ if ./try; then
+ echo "Yes, it seems to work."
+ val="$define"
+ else
+ echo "Nope, it didn't work."
+ val="$undef"
+ fi
+ else
+ echo "I'm unable to compile the test program, so I'll assume not."
+ val="$undef"
+ fi
+ ;;
+*) val="$undef";
+ echo "Nope, since you don't even have fcntl()."
+ ;;
+esac
+set d_fcntl_can_lock
+eval $setvar
+$rm -f try*
+
+
hasfield='varname=$1; struct=$2; field=$3; shift; shift; shift;
while $test $# -ge 2; do
case "$1" in
esac
-
: check for off64_t
echo " "
echo "Checking to see if you have off64_t..." >&4
*) dflt='n';;
esac
echo "$package can use the sfio library, but it is experimental."
+ case "$useperlio" in
+ "$undef")
+ echo "For sfio also the PerlIO abstraction layer is needed."
+ echo "Earlier you said you wouldn't want that."
+ ;;
+ esac
rp="You seem to have sfio available, do you want to try using it?"
. ./myread
case "$ans" in
- y|Y) ;;
+ y|Y) echo "Ok, turning on both sfio and PerlIO, then."
+ useperlio="$define"
+ val="$define"
+ ;;
*) echo "Ok, avoiding sfio this time. I'll use stdio instead."
val="$undef"
: Remove sfio from list of libraries to use
;;
*) case "$usesfio" in
true|$define|[yY]*)
- echo "Sorry, cannot find sfio on this machine" >&4
- echo "Ignoring your setting of usesfio=$usesfio" >&4
+ echo "Sorry, cannot find sfio on this machine." >&4
+ echo "Ignoring your setting of usesfio=$usesfio." >&4
+ val="$undef"
;;
esac
;;
eval $setvar
$rm -f try.c try
+: see if socks5_init exists
+set socks5_init d_socks5_init
+eval $inlibc
+
: see if sys/stat.h is available
set sys/stat.h i_sysstat
eval $inhdr
set d_stdio_cnt_lval
eval $setvar
+
+: test whether setting _ptr sets _cnt as a side effect
+d_stdio_ptr_lval_sets_cnt="$undef"
+d_stdio_ptr_lval_nochange_cnt="$undef"
+case "$d_stdio_ptr_lval$d_stdstdio" in
+$define$define)
+ echo "Checking to see what happens if we set the stdio ptr..." >&4
+$cat >try.c <<EOP
+#include <stdio.h>
+/* Can we scream? */
+/* Eat dust sed :-) */
+/* In the buffer space, no one can hear you scream. */
+#define FILE_ptr(fp) ((fp)->_ptr)
+#define FILE_cnt(fp) ((fp)->_cnt)
+#include <sys/types.h>
+int main() {
+ FILE *fp = fopen("try.c", "r");
+ int c;
+ char *ptr;
+ size_t cnt;
+ if (!fp) {
+ puts("Fail even to read");
+ exit(1);
+ }
+ c = getc(fp); /* Read away the first # */
+ if (c == EOF) {
+ puts("Fail even to read");
+ exit(1);
+ }
+ if (!(
+ 18 <= FILE_cnt(fp) &&
+ strncmp(FILE_ptr(fp), "include <stdio.h>\n", 18) == 0
+ )) {
+ puts("Fail even to read");
+ exit (1);
+ }
+ ptr = (char*) FILE_ptr(fp);
+ cnt = (size_t)FILE_cnt(fp);
+
+ FILE_ptr(fp) += 42;
+
+ if ((char*)FILE_ptr(fp) != (ptr + 42)) {
+ printf("Fail ptr check %p != %p", FILE_ptr(fp), (ptr + 42));
+ exit (1);
+ }
+ if (FILE_cnt(fp) <= 20) {
+ printf ("Fail (<20 chars to test)");
+ exit (1);
+ }
+ if (strncmp(FILE_ptr(fp), "Eat dust sed :-) */\n", 20) != 0) {
+ puts("Fail compare");
+ exit (1);
+ }
+ if (cnt == FILE_cnt(fp)) {
+ puts("Pass_unchanged");
+ exit (0);
+ }
+ if (FILE_cnt(fp) == (cnt - 42)) {
+ puts("Pass_changed");
+ exit (0);
+ }
+ printf("Fail count was %d now %d\n", cnt, FILE_cnt(fp));
+ return 1;
+
+}
+EOP
+ set try
+ if eval $compile; then
+ case `./try$exe_ext` in
+ Pass_changed)
+ echo "Increasing ptr in your stdio decreases cnt by the same amount. Good." >&4
+ d_stdio_ptr_lval_sets_cnt="$define" ;;
+ Pass_unchanged)
+ echo "Increasing ptr in your stdio leaves cnt unchanged. Good." >&4
+ d_stdio_ptr_lval_nochange_cnt="$define" ;;
+ Fail*)
+ echo "Increasing ptr in your stdio didn't do exactly what I expected. We'll not be doing that then." >&4 ;;
+ *)
+ echo "It appears attempting to set ptr in your stdio is a bad plan." >&4 ;;
+ esac
+ else
+ echo "It seems we can't set ptr in your stdio. Nevermind." >&4
+ fi
+ $rm -f try.c try
+ ;;
+esac
+
: see if _base is also standard
val="$undef"
case "$d_stdstdio" in
#ifdef __hpux
#define strtoll __strtoll
#endif
+#ifdef __EMX__
+#define strtoll _strtoll
+#endif
#include <stdio.h>
extern long long int strtoll(char *s, char **, int);
static int bad = 0;
EOCP
set try
if eval $compile; then
- case "`./try`" in
+ yyy=`./try`
+ case "$yyy" in
ok) echo "Your strtoll() seems to be working okay." ;;
*) cat <<EOM >&4
Your strtoll() doesn't seem to be working okay.
d_strtoll="$undef"
;;
esac
+ else
+ echo "(I can't seem to compile the test program--assuming it doesn't)"
+ d_strtoll="$undef"
fi
;;
esac
set tebcdic
if eval $compile_ok; then
if ./tebcdic; then
- echo "You have EBCDIC." >&4
+ echo "You seem to speak EBCDIC." >&4
val="$define"
else
- echo "Nope, no EBCDIC, probably ASCII or some ISO Latin." >&4
+ echo "Nope, no EBCDIC, probably ASCII or some ISO Latin. Or UTF8." >&4
fi
else
echo "I'm unable to compile the test program." >&4
- echo "I'll assume ASCII or some ISO Latin." >&4
+ echo "I'll assume ASCII or some ISO Latin. Or UTF8." >&4
fi
$rm -f tebcdic.c tebcdic
set ebcdic
case "$yyy" in
12345678901)
sPRId64='"d"'; sPRIi64='"i"'; sPRIu64='"u"';
- sPRIo64='"o"'; sPRIx64='"x"'; sPRIX64='"X"';
+ sPRIo64='"o"'; sPRIx64='"x"'; sPRIXU64='"X"';
echo "We will use %d."
;;
esac
case "$yyy" in
12345678901)
sPRId64='"ld"'; sPRIi64='"li"'; sPRIu64='"lu"';
- sPRIo64='"lo"'; sPRIx64='"lx"'; sPRIX64='"lX"';
+ sPRIo64='"lo"'; sPRIx64='"lx"'; sPRIXU64='"lX"';
echo "We will use %ld."
;;
esac
case "$yyy" in
12345678901)
sPRId64=PRId64; sPRIi64=PRIi64; sPRIu64=PRIu64;
- sPRIo64=PRIo64; sPRIx64=PRIx64; sPRIX64=PRIX64;
+ sPRIo64=PRIo64; sPRIx64=PRIx64; sPRIXU64=PRIXU64;
echo "We will use the C9X style."
;;
esac
#include <sys/types.h>
#include <stdio.h>
int main() {
- long long q = 12345678901LL; /* AIX cc requires the LL prefix. */
+ long long q = 12345678901LL; /* AIX cc requires the LL suffix. */
printf("%lld\n", q);
}
EOCP
case "$yyy" in
12345678901)
sPRId64='"lld"'; sPRIi64='"lli"'; sPRIu64='"llu"';
- sPRIo64='"llo"'; sPRIx64='"llx"'; sPRIX64='"llX"';
+ sPRIo64='"llo"'; sPRIx64='"llx"'; sPRIXU64='"llX"';
echo "We will use the %lld style."
;;
esac
case "$yyy" in
12345678901)
sPRId64='"Ld"'; sPRIi64='"Li"'; sPRIu64='"Lu"';
- sPRIo64='"Lo"'; sPRIx64='"Lx"'; sPRIX64='"LX"';
+ sPRIo64='"Lo"'; sPRIx64='"Lx"'; sPRIXU64='"LX"';
echo "We will use %Ld."
;;
esac
case "$yyy" in
12345678901)
sPRId64='"qd"'; sPRIi64='"qi"'; sPRIu64='"qu"';
- sPRIo64='"qo"'; sPRIx64='"qx"'; sPRIX64='"qX"';
+ sPRIo64='"qo"'; sPRIx64='"qx"'; sPRIXU64='"qX"';
echo "We will use %qd."
;;
esac
case "$sPRId64" in
'') d_PRId64="$undef"; d_PRIi64="$undef"; d_PRIu64="$undef";
- d_PRIo64="$undef"; d_PRIx64="$undef"; d_PRIX64="$undef";
+ d_PRIo64="$undef"; d_PRIx64="$undef"; d_PRIXU64="$undef";
;;
*) d_PRId64="$define"; d_PRIi64="$define"; d_PRIu64="$define";
- d_PRIo64="$define"; d_PRIx64="$define"; d_PRIX64="$define";
+ d_PRIo64="$define"; d_PRIx64="$define"; d_PRIXU64="$define";
;;
esac
uvuformat="$sPRIu64"
uvoformat="$sPRIo64"
uvxformat="$sPRIx64"
+ uvXUformat="$sPRIXU64"
else
if $test X"$ivsize" = X"$longsize"; then
ivdformat='"ld"'
uvuformat='"lu"'
uvoformat='"lo"'
uvxformat='"lx"'
+ uvXUformat='"lX"'
else
if $test X"$ivsize" = X"$intsize"; then
ivdformat='"d"'
uvuformat='"u"'
uvoformat='"o"'
uvxformat='"x"'
+ uvXUformat='"X"'
else
: far out
if $test X"$ivsize" = X"$shortsize"; then
uvuformat='"hu"'
uvoformat='"ho"'
uvxformat='"hx"'
+ uvXUformat='"hX"'
fi
fi
fi
fi
+if $test X"$uselongdouble" = X"$define" -a X"$d_longdbl" = X"$define" -a X"$d_PRIgldbl" = X"$define"; then
+ nveformat="$sPRIeldbl"
+ nvfformat="$sPRIfldbl"
+ nvgformat="$sPRIgldbl"
+ nvEUformat="$sPRIEUldbl"
+ nvFUformat="$sPRIFUldbl"
+ nvGUformat="$sPRIGUldbl"
+else
+ nveformat='"e"'
+ nvfformat='"f"'
+ nvgformat='"g"'
+ nvEUformat='"E"'
+ nvFUformat='"F"'
+ nvGUformat='"G"'
+fi
+
case "$ivdformat" in
'') echo "$0: Fatal: failed to find format strings, cannot continue." >& 4
exit 1
dflt=''
case "$pg" in
/*) dflt=$pg;;
+ [a-zA-Z]:/*) dflt=$pg;;
esac
case "$more" in
/*) dflt=$more;;
+ [a-zA-Z]:/*) dflt=$more;;
esac
case "$less" in
/*) dflt=$less;;
+ [a-zA-Z]:/*) dflt=$less;;
esac
case "$dflt" in
'') dflt=/usr/ucb/more;;
$cc $ccflags -c bar2.c >/dev/null 2>&1
$cc $ccflags -c foo.c >/dev/null 2>&1
$ar rc bar$_a bar2$_o bar1$_o >/dev/null 2>&1
-if $cc $ccflags $ldflags -o foobar foo$_o bar$_a $libs > /dev/null 2>&1 &&
+if $cc -o foobar $ccflags $ldflags foo$_o bar$_a $libs > /dev/null 2>&1 &&
./foobar >/dev/null 2>&1; then
echo "$ar appears to generate random libraries itself."
orderlib=false
ranlib=":"
elif $ar ts bar$_a >/dev/null 2>&1 &&
- $cc $ccflags $ldflags -o foobar foo$_o bar$_a $libs > /dev/null 2>&1 &&
+ $cc -o foobar $ccflags $ldflags foo$_o bar$_a $libs > /dev/null 2>&1 &&
./foobar >/dev/null 2>&1; then
echo "a table of contents needs to be added with '$ar ts'."
orderlib=false
MIPS_SZLONG MIPS_SZPTR MIPSEB MIPSEL MODERN_C motorola
mpeix MSDOS MTXINU MULTIMAX mvs MVS n16 ncl_el ncl_mr
NetBSD news1500 news1700 news1800 news1900 news3700
-news700 news800 news900 NeXT NLS ns16000 ns32000
+news700 news800 news900 NeXT NLS nonstopux ns16000 ns32000
ns32016 ns32332 ns32k nsc32000
OCS88 OEMVS OpenBSD os OS2 OS390 osf OSF1 OSF_SOURCE
pa_risc PA_RISC1_1 PA_RISC2_0 PARAGON parisc
./tr '[a-z]' '[A-Z]' < Cppsym.know > Cppsym.a
./tr '[A-Z]' '[a-z]' < Cppsym.know > Cppsym.b
$cat Cppsym.know > Cppsym.c
-$cat Cppsym.a Cppsym.b Cppsym.c | $tr ' ' $trnl | sort | uniq > Cppsym.know
+$cat Cppsym.a Cppsym.b Cppsym.c | $tr ' ' $trnl | $sort | $uniq > Cppsym.know
$rm -f Cppsym.a Cppsym.b Cppsym.c
cat <<EOSH > Cppsym
$startsh
irix-) ccflags="\$ccflags -woff 1178" ;;
os2-*) ccflags="\$ccflags -Zlinker /PM:VIO" ;;
esac
-$cc $optimize \$ccflags $ldflags -o try try.c $libs && ./try$exe_ext
+$cc -o try $optimize \$ccflags $ldflags try.c $libs && ./try$exe_ext
EOSH
chmod +x Cppsym.try
$eunicefix Cppsym.try
shift
extensions="$*"
+: Remove libraries needed only for extensions
+: The appropriate ext/Foo/Makefile.PL will add them back in, if necessary.
+: The exception is SunOS 4.x, which needs them.
+case "${osname}X${osvers}" in
+sunos*X4*)
+ perllibs="$libs"
+ ;;
+*) case "$usedl" in
+ $define|true|[yY]*)
+ set X `echo " $libs " | sed -e 's@ -lndbm @ @' -e 's@ -lgdbm @ @' -e 's@ -ldbm @ @' -e 's@ -ldb @ @'`
+ shift
+ perllibs="$*"
+ ;;
+ *) perllibs="$libs"
+ ;;
+ esac
+ ;;
+esac
+
: Remove build directory name from cppstdin so it can be used from
: either the present location or the final installed location.
echo " "
ccdlflags='$ccdlflags'
ccflags='$ccflags'
ccflags_uselargefiles='$ccflags_uselargefiles'
+ccname='$ccname'
ccsymbols='$ccsymbols'
+ccversion='$ccversion'
cf_by='$cf_by'
cf_email='$cf_email'
cf_time='$cf_time'
cryptlib='$cryptlib'
csh='$csh'
d_Gconvert='$d_Gconvert'
-d_PRIEldbl='$d_PRIEldbl'
-d_PRIFldbl='$d_PRIFldbl'
-d_PRIGldbl='$d_PRIGldbl'
-d_PRIX64='$d_PRIX64'
+d_PRIEUldbl='$d_PRIEUldbl'
+d_PRIFUldbl='$d_PRIFUldbl'
+d_PRIGUldbl='$d_PRIGUldbl'
+d_PRIXU64='$d_PRIXU64'
d_PRId64='$d_PRId64'
d_PRIeldbl='$d_PRIeldbl'
d_PRIfldbl='$d_PRIfldbl'
d_PRIo64='$d_PRIo64'
d_PRIu64='$d_PRIu64'
d_PRIx64='$d_PRIx64'
+d_SCNfldbl='$d_SCNfldbl'
d_access='$d_access'
d_accessx='$d_accessx'
d_alarm='$d_alarm'
d_fchmod='$d_fchmod'
d_fchown='$d_fchown'
d_fcntl='$d_fcntl'
+d_fcntl_can_lock='$d_fcntl_can_lock'
d_fd_macros='$d_fd_macros'
d_fd_set='$d_fd_set'
d_fds_bits='$d_fds_bits'
d_socket='$d_socket'
d_socklen_t='$d_socklen_t'
d_sockpair='$d_sockpair'
+d_socks5_init='$d_socks5_init'
d_sqrtl='$d_sqrtl'
d_statblks='$d_statblks'
d_statfs_f_flags='$d_statfs_f_flags'
d_statvfs='$d_statvfs'
d_stdio_cnt_lval='$d_stdio_cnt_lval'
d_stdio_ptr_lval='$d_stdio_ptr_lval'
+d_stdio_ptr_lval_nochange_cnt='$d_stdio_ptr_lval_nochange_cnt'
+d_stdio_ptr_lval_sets_cnt='$d_stdio_ptr_lval_sets_cnt'
d_stdio_stream_array='$d_stdio_stream_array'
d_stdiobase='$d_stdiobase'
d_stdstdio='$d_stdstdio'
h_sysfile='$h_sysfile'
hint='$hint'
hostcat='$hostcat'
-huge='$huge'
i16size='$i16size'
i16type='$i16type'
i32size='$i32size'
ivtype='$ivtype'
known_extensions='$known_extensions'
ksh='$ksh'
-large='$large'
ld='$ld'
lddlflags='$lddlflags'
ldflags='$ldflags'
man3dir='$man3dir'
man3direxp='$man3direxp'
man3ext='$man3ext'
-medium='$medium'
mips_type='$mips_type'
mkdir='$mkdir'
mmaptype='$mmaptype'
-models='$models'
modetype='$modetype'
more='$more'
multiarch='$multiarch'
nm_so_opt='$nm_so_opt'
nonxs_ext='$nonxs_ext'
nroff='$nroff'
+nvEUformat='$nvEUformat'
+nvFUformat='$nvFUformat'
+nvGUformat='$nvGUformat'
+nveformat='$nveformat'
+nvfformat='$nvfformat'
+nvgformat='$nvgformat'
nvsize='$nvsize'
nvtype='$nvtype'
o_nonblock='$o_nonblock'
perl5='$perl5'
perl='$perl'
perladmin='$perladmin'
+perllibs='$perllibs'
perlpath='$perlpath'
pg='$pg'
phostname='$phostname'
rm='$rm'
rmail='$rmail'
runnm='$runnm'
-sPRIEldbl='$sPRIEldbl'
-sPRIFldbl='$sPRIFldbl'
-sPRIGldbl='$sPRIGldbl'
-sPRIX64='$sPRIX64'
+sPRIEUldbl='$sPRIEUldbl'
+sPRIFUldbl='$sPRIFUldbl'
+sPRIGUldbl='$sPRIGUldbl'
+sPRIXU64='$sPRIXU64'
sPRId64='$sPRId64'
sPRIeldbl='$sPRIeldbl'
sPRIfldbl='$sPRIfldbl'
sPRIo64='$sPRIo64'
sPRIu64='$sPRIu64'
sPRIx64='$sPRIx64'
+sSCNfldbl='$sSCNfldbl'
sched_yield='$sched_yield'
scriptdir='$scriptdir'
scriptdirexp='$scriptdirexp'
sizetype='$sizetype'
sleep='$sleep'
smail='$smail'
-small='$small'
so='$so'
sockethdr='$sockethdr'
socketlib='$socketlib'
sort='$sort'
spackage='$spackage'
spitshell='$spitshell'
-split='$split'
src='$src'
ssizetype='$ssizetype'
startperl='$startperl'
usevfork='$usevfork'
usrinc='$usrinc'
uuname='$uuname'
+uvXUformat='$uvXUformat'
uvoformat='$uvoformat'
uvsize='$uvsize'
uvtype='$uvtype'
vendorprefix='$vendorprefix'
vendorprefixexp='$vendorprefixexp'
version='$version'
+versiononly='$versiononly'
vi='$vi'
voidflags='$voidflags'
xlibpth='$xlibpth'
: propagate old symbols
if $test -f UU/config.sh; then
- <UU/config.sh sort | uniq >UU/oldconfig.sh
+ <UU/config.sh $sort | $uniq >UU/oldconfig.sh
sed -n 's/^\([a-zA-Z_0-9]*\)=.*/\1/p' config.sh config.sh UU/oldconfig.sh |\
- sort | uniq -u >UU/oldsyms
+ $sort | $uniq -u >UU/oldsyms
set X `cat UU/oldsyms`
shift
case $# in
. UU/myread
case "$ans" in
y*)
- $make depend && echo "Now you must run a $make."
+ $make depend && echo "Now you must run '$make'."
;;
*)
echo "You must run '$make depend' then '$make'."