-#! /bin/sh
+#!/usr/bin/sh
-# hints/hpux.sh
-# Perl Configure hints file for Hewlett-Packard's HP-UX 9.x and 10.x
-# (Hopefully, 7.x through 11.x.)
-#
-# This file is based on hints/hpux_9.sh, Perl Configure hints file for
-# Hewlett Packard HP-UX 9.x
-#
-# Use Configure -Dcc=gcc to use gcc.
-#
-# From: Jeff Okamoto <okamoto@corp.hp.com>
-# and
-# hints/hpux_10.sh, Perl Configure hints file for Hewlett Packard HP-UX 10.x
-# From: Giles Lean <giles@nemeton.com.au>
-# and
-# Use #define CPU_* instead of comments for >= 10.x.
-# Support PA1.2 under 10.x.
-# Distinguish between PA2.0, PA2.1, etc.
-# Distinguish between MC68020, MC68030, MC68040
-# Don't assume every OS != 10 is < 10, (e.g., 11).
-# From: Chuck Phillips <cdp@fc.hp.com>
-# HP-UX 10 pthreads hints: Matthew T Harden <mthard@mthard1.monsanto.com>
-
-# This version: August 15, 1997
-# Current maintainer: Jeff Okamoto <okamoto@corp.hp.com>
-
-#--------------------------------------------------------------------
-# Use Configure -Dcc=gcc to use gcc.
-# Use Configure -Dprefix=/usr/local to install in /usr/local.
-#
-# You may have dynamic loading problems if the environment variable
-# LDOPTS='-a archive'. Under >= 10.x, you can instead LDOPTS='-a
-# archive_shared' to prefer archive libraries without requiring them.
-# Regardless of HPUX release, in the "libs" variable or the ext.libs
-# file, you can always give explicit path names to archive libraries
-# that may not exist on the target machine. E.g., /usr/lib/libndbm.a
-# instead of -lndbm. See also note below on ndbm.
-#
-# ALSO, bear in mind that gdbm and Berkely DB contain incompatible
-# replacements for ndbm (and dbm) routines. If you want concurrent
-# access to ndbm files, you need to make sure libndbm is linked in
-# *before* gdbm and Berkely DB. Lastly, remember to check the
-# "ext.libs" file which is *probably* messing up the order. Often,
-# you can replace ext.libs with an empty file to fix the problem.
-#
-# If you get a message about "too much defining", as may happen
-# in HPUX < 10, you might have to append a single entry to your
-# ccflags: '-Wp,-H256000'
-# NOTE: This is a single entry (-W takes the argument 'p,-H256000').
-#--------------------------------------------------------------------
-
-# Turn on the _HPUX_SOURCE flag to get many of the HP add-ons
-# regardless of compiler. For the HP ANSI C compiler, you may also
-# want to include +e to enable "long long" and "long double".
-#
-# HP compiler flags to include (if at all) *both* as part of ccflags
-# and cc itself so Configure finds (and builds) everything
-# consistently:
-# -Aa -D_HPUX_SOURCE +e
-#
-# Lastly, you may want to include the "-z" HP linker flag so that
-# reading from a NULL pointer causes a SEGV.
-ccflags="$ccflags -D_HPUX_SOURCE"
-
-# Check if you're using the bundled C compiler. This compiler doesn't support
-# ANSI C (the -Aa flag) nor can it produce shared libraries. Thus we have
-# to turn off dynamic loading.
-case "$cc" in
-'') if cc $ccflags -Aa 2>&1 | $contains 'option' >/dev/null
- then
- case "$usedl" in
- '') usedl="$undef"
- cat <<'EOM' >&4
-
-The bundled C compiler can not produce shared libraries, so you will
-not be able to use dynamic loading.
-
-EOM
- ;;
- esac
- else
- ccflags="$ccflags -Aa" # The add-on compiler supports ANSI C
- # cppstdin and cpprun need the -Aa option if you use the unbundled
- # ANSI C compiler (*not* the bundled K&R compiler or gcc)
- # [XXX this should be set automatically by Configure, but isn't yet.]
- # [XXX This is reported not to work. You may have to edit config.sh.
- # After running Configure, set cpprun and cppstdin in config.sh,
- # run "Configure -S" and then "make".]
- cpprun="${cc:-cc} -E -Aa"
- cppstdin="$cpprun"
- cppminus='-'
- cpplast='-'
- fi
- # For HP's ANSI C compiler, up to "+O3" is safe for everything
- # except shared libraries (PIC code). Max safe for PIC is "+O2".
- # Setting both causes innocuous warnings.
- #optimize='+O3'
- #cccdlflags='+z +O2'
- optimize='-O'
- cc=cc
- ;;
-esac
-
-case `$cc -v 2>&1`"" in
-*gcc*) ccisgcc="$define" ;;
-*) ccisgcc='' ;;
-esac
+### SYSTEM ARCHITECTURE
# Determine the architecture type of this system.
# Keep leading tab below -- Configure Black Magic -- RAM, 03/02/97
xxOsRevMajor=`uname -r | sed -e 's/^[^0-9]*//' | cut -d. -f1`;
- #xxOsRevMinor=`uname -r | sed -e 's/^[^0-9]*//' | cut -d. -f2`;
-if [ "$xxOsRevMajor" -ge 10 ]
-then
- # This system is running >= 10.x
-
- # Tested on 10.01 PA1.x and 10.20 PA[12].x. Idea: Scan
- # /usr/include/sys/unistd.h for matches with "#define CPU_* `getconf
- # CPU_VERSION`" to determine CPU type. Note the part following
- # "CPU_" is used, *NOT* the comment.
- #
- # ASSUMPTIONS: Numbers will continue to be defined in hex -- and in
- # /usr/include/sys/unistd.h -- and the CPU_* #defines will be kept
- # up to date with new CPU/OS releases.
- xxcpu=`getconf CPU_VERSION`; # Get the number.
- xxcpu=`printf '0x%x' $xxcpu`; # convert to hex
- archname=`sed -n -e "s/^#[ \t]*define[ \t]*CPU_//p" /usr/include/sys/unistd.h |
- sed -n -e "s/[ \t]*$xxcpu[ \t].*//p" |
- sed -e s/_RISC/-RISC/ -e s/HP_// -e s/_/./`;
+if [ "$xxOsRevMajor" -ge 10 ]; then
+ # This system is running >= 10.x
+
+ # Tested on 10.01 PA1.x and 10.20 PA[12].x.
+ # Idea: Scan /usr/include/sys/unistd.h for matches with
+ # "#define CPU_* `getconf # CPU_VERSION`" to determine CPU type.
+ # Note the text following "CPU_" is used, *NOT* the comment.
+ #
+ # ASSUMPTIONS: Numbers will continue to be defined in hex -- and in
+ # /usr/include/sys/unistd.h -- and the CPU_* #defines will be kept
+ # up to date with new CPU/OS releases.
+ xxcpu=`getconf CPU_VERSION`; # Get the number.
+ xxcpu=`printf '0x%x' $xxcpu`; # convert to hex
+ archname=`sed -n -e "s/^#[ \t]*define[ \t]*CPU_//p" /usr/include/sys/unistd.h |
+ sed -n -e "s/[ \t]*$xxcpu[ \t].*//p" |
+ sed -e s/_RISC/-RISC/ -e s/HP_// -e s/_/./`;
else
- # This system is running <= 9.x
- # Tested on 9.0[57] PA and [78].0 MC680[23]0. Idea: After removing
- # MC6888[12] from context string, use first CPU identifier.
- #
- # ASSUMPTION: Only CPU identifiers contain no lowercase letters.
- archname=`getcontext | tr ' ' '\012' | grep -v '[a-z]' | grep -v MC688 |
- sed -e 's/HP-//' -e 1q`;
- selecttype='int *'
-fi
-
-# Do this right now instead of the delayed callback unit approach.
-case "$use64bitint" in
-$define|true|[yY]*)
- if [ "$xxOsRevMajor" -lt 11 ]; then
- cat <<EOM >&4
-
-64-bit compilation is not supported on HP-UX $xxOsRevMajor.
-You need at least HP-UX 11.0.
-Cannot continue, aborting.
-
-EOM
- exit 1
- fi
-
- # Without the 64-bit libc we cannot do much.
- if [ ! -f /lib/pa20_64/libc.sl ]; then
- cat <<EOM >&4
-
-You do not seem to have the 64-bit libraries in /lib/pa20_64.
-Most importantly, I cannot find /lib/pa20_64/libc.sl.
-Cannot continue, aborting.
-
-EOM
- exit 1
+ # This system is running <= 9.x
+ # Tested on 9.0[57] PA and [78].0 MC680[23]0. Idea: After removing
+ # MC6888[12] from context string, use first CPU identifier.
+ #
+ # ASSUMPTION: Only CPU identifiers contain no lowercase letters.
+ archname=`getcontext | tr ' ' '\012' | grep -v '[a-z]' | grep -v MC688 |
+ sed -e 's/HP-//' -e 1q`;
+ selecttype='int *'
fi
- ccflags="$ccflags +DD64"
- ldflags="$ldflags +DD64"
- test -d /lib/pa20_64 && loclibpth="$loclibpth /lib/pa20_64"
- libscheck='case "`/usr/bin/file $xxx`" in
-*LP64*|*PA-RISC2.0*) ;;
-*) xxx=/no/64-bit$xxx ;;
-esac'
- case "$ccisgcc" in
- "$define") ld=$cc ;;
- *) ld=/usr/bin/ld ;;
- esac
- ar=/usr/bin/ar
- full_ar=$ar
-
- case "$ccisgcc" in
- "$define") ;;
- *) # The strict ANSI mode (-Aa) doesn't like the LL suffixes.
- case "$ccflags" in
- *-Aa*)
- echo "(Changing from strict ANSI compilation to extended because of 64-bitness)"
- ccflags=`echo $ccflags|sed 's@ -Aa @ -Ae @'`
- ;;
- *) ccflags="$ccflags -Ae" ;;
- esac
- ;;
- esac
+echo "Archname is $archname"
- set `echo " $libswanted " | sed -e 's@ dl @ @'`
- libswanted="$*"
-
- case "$ccisgcc" in
- "$define") ;;
- esac
- ;;
-esac
-case "$ccisgcc" in
-# Even if you use gcc, prefer the HP math library over the GNU one.
-"$define") test -d /lib/pa1.1 && ccflags="$ccflags -L/lib/pa1.1" ;;
-esac
-
-
-case "$ccisgcc" in
-"$define") ;;
-*) case "`getconf KERNEL_BITS 2>/dev/null`" in
- *64*) ldflags="$ldflags -Wl,+vnocompatwarnings" ;;
- esac
- ;;
-esac
+### HP-UX OS specific behaviour
-# Remove bad libraries that will cause problems
-# (This doesn't remove libraries that don't actually exist)
-# -lld is unneeded (and I can't figure out what it's used for anyway)
# -ldbm is obsolete and should not be used
# -lBSD contains BSD-style duplicates of SVR4 routines that cause confusion
# -lPW is obsolete and should not be used
# The libraries crypt, malloc, ndir, and net are empty.
-# Although -lndbm should be included, it will make perl blow up if you should
-# copy the binary to a system without libndbm.sl. See ccdlflags below.
-set `echo " $libswanted " | sed -e 's@ ld @ @' -e 's@ dbm @ @' -e 's@ BSD @ @' -e 's@ PW @ @'`
+set `echo "X $libswanted " | sed -e 's/ ld / /' -e 's/ dbm / /' -e 's/ BSD / /' -e 's/ PW / /'`
+shift
libswanted="$*"
# By setting the deferred flag below, this means that if you run perl
# ccdlflags="-Wl,-E -Wl,-B,immediate,-B,nonfatal $ccdlflags"
ccdlflags="-Wl,-E -Wl,-B,deferred $ccdlflags"
-usemymalloc='y'
-alignbytes=8
-# For native nm, you need "-p" to produce BSD format output.
-nm_opt='-p'
+cc=${cc:-cc}
+ar=/usr/bin/ar # Yes, truly override. We do not want the GNU ar.
+full_ar=$ar # I repeat, no GNU ar. arrr.
+
+set `echo "X $ccflags " | sed -e 's/ -A[ea] / /' -e 's/ -D_HPUX_SOURCE / /'`
+shift
+ cc_cppflags="$* -D_HPUX_SOURCE"
+cppflags="-Aa -D__STDC_EXT__ $cc_cppflags"
+
+case "$prefix" in
+ "") prefix='/opt/perl5' ;;
+ esac
+
+case `$cc -v 2>&1`"" in
+ *gcc*) ccisgcc="$define"
+ ccflags="$cc_cppflags"
+ case "`getconf KERNEL_BITS 2>/dev/null`" in
+ *64*) ldflags="$ldflags -Wl,+vnocompatwarnings"
+ ccflags="$ccflags -Wl,+vnocompatwarnings -Wa,+DA2.0"
+ ;;
+ esac
+ ;;
+ *) ccisgcc=''
+ ccversion=`which cc | xargs what | awk '/Compiler/{print $2}'`
+ ccflags="-Ae $cc_cppflags"
+ # Needed because cpp does only support -Aa (not -Ae)
+ cpplast='-'
+ cppminus='-'
+ cppstdin='cc -E -Aa -D__STDC_EXT__'
+ cpprun=$cppstdin
+ case "$d_casti32" in
+ "") d_casti32='undef' ;;
+ esac
+ ;;
+ esac
# When HP-UX runs a script with "#!", it sets argv[0] to the script name.
toke_cflags='ccflags="$ccflags -DARG_ZERO_IS_SCRIPT"'
-# If your compile complains about FLT_MIN, uncomment the next line
-# POSIX_cflags='ccflags="$ccflags -DFLT_MIN=1.17549435E-38"'
-# Comment this out if you don't want to follow the SVR4 filesystem layout
-# that HP-UX 10.0 uses
-case "$prefix" in
-'') prefix='/opt/perl5' ;;
-esac
+### 64 BITNESS
-# HP-UX can't do setuid emulation offered by Configure
-case "$d_dosuid" in
-'') d_dosuid="$undef" ;;
-esac
+case "$use64bitall" in
+ $define|true|[yY]*) use64bitint="$define" ;;
+ esac
-# HP-UX 11 groks also LD_LIBRARY_PATH but SHLIB_PATH
-# is recommended for compatibility.
-case "$ldlibpthname" in
-'') ldlibpthname=SHLIB_PATH ;;
-esac
+case "$usemorebits" in
+ $define|true|[yY]*) use64bitint="$define"; uselongdouble="$define" ;;
+ esac
-# HP-UX 10.20 and gcc 2.8.1 break UINT32_MAX.
-case "$ccisgcc" in
-"$define") ccflags="$ccflags -DUINT32_MAX_BROKEN" ;;
-esac
-
-cat > UU/cc.cbu <<'EOSH'
-# XXX This script UU/cc.cbu will get 'called-back' by Configure after it
-# XXX has prompted the user for the C compiler to use.
-# Get gcc to share its secrets.
-echo 'main() { return 0; }' > try.c
- # Indent to avoid propagation to config.sh
- verbose=`${cc:-cc} -v -o try try.c 2>&1`
-if echo "$verbose" | grep '^Reading specs from' >/dev/null 2>&1; then
- # Using gcc.
- : nothing to see here, move on.
-else
- # Using cc.
- ar=${ar:-ar}
- case "`$ar -V 2>&1`" in
- *GNU*)
- if test -x /usr/bin/ar; then
- cat <<END >&2
-
-*** You are using HP cc(1) but GNU ar(1). This might lead into trouble
-*** later on, I'm switching to HP ar to play safe.
-
-END
- ar=/usr/bin/ar
+case "$uselongdouble" in
+ $define|true|[yY]*)
+ cat <<EOM >&4
+
+*** long doubles are not (yet) supported on HP-UX (any version)
+*** Until it does, we cannot continue, aborting.
+EOM
+ exit 1 ;;
+ esac
+
+case "$use64bitint" in
+ $define|true|[Yy])
+
+ if [ "$xxOsRevMajor" -lt 11 ]; then
+ cat <<EOM >&4
+
+*** 64-bit compilation is not supported on HP-UX $xxOsRevMajor.
+*** You need at least HP-UX 11.0.
+*** Cannot continue, aborting.
+EOM
+ exit 1
fi
+
+ # Set libc and the library paths
+ case "$archname" in
+ PA-RISC*)
+ loclibpth="$loclibpth /lib/pa20_64"
+ libc='/lib/pa20_64/libc.sl' ;;
+ IA64*)
+ loclibpth="$loclibpth /usr/lib/hpux64"
+ libc='/usr/lib/hpux64/libc.so' ;;
+ esac
+ if [ ! -f "$libc" ]; then
+ cat <<EOM >&4
+
+*** You do not seem to have the 64-bit libc.
+*** I cannot find the file $libc.
+*** Cannot continue, aborting.
+EOM
+ exit 1
+ fi
+
+ ccflags="$ccflags +DD64"
+ ldflags="$ldflags +DD64"
+
+ # Reset the library checker to make sure libraries
+ # are the right type
+ libscheck='case "`/usr/bin/file $xxx`" in
+ *ELF-64*|*LP64*|*PA-RISC2.0*) ;;
+ *) xxx=/no/64-bit$xxx ;;
+ esac'
+
+ ;;
+
+ *) # Not in 64-bit mode
+
+ case "$archname" in
+ PA-RISC*)
+ libc='/lib/libc.sl' ;;
+ IA64*)
+ loclibpth="$loclibpth /usr/lib/hpux32"
+ libc='/usr/lib/hpux32/libc.so' ;;
+ esac
+ ;;
+ esac
+
+
+### COMPILER SPECIFICS
+
+case "$ccisgcc" in
+ $define|true|[Yy])
+
+ case "$optimize" in
+ "") optimize="-g -O" ;;
+ *O[3456789]*) optimize=`echo "$optimize" | sed -e 's/O[3-9]/O2/'` ;;
+ esac
+ #ld="$cc"
+ ld="/usr/bin/ld"
+ cccdlflags='-fPIC'
+ #lddlflags='-shared'
+ lddlflags='-b +vnocompatwarnings'
+ case "$optimize" in
+ *-g*-O*|*-O*-g*)
+ # gcc without gas will not accept -g
+ echo "main(){}">try.c
+ case "`$cc $optimize -c try.c 2>&1`" in
+ *"-g option disabled"*)
+ set `echo "X $optimize " | sed -e 's/ -g / /'`
+ shift
+ optimize="$*"
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ *) # HP's compiler cannot combine -g and -O
+ case "$optimize" in
+ "") optimize="+O2 +Onolimit" ;;
+ *O[3456789]*) optimize=`echo "$optimize" | sed -e 's/O[3-9]/O2/'` ;;
+ esac
+ ld=/usr/bin/ld
+ cccdlflags='+Z'
+ lddlflags='-b +vnocompatwarnings'
;;
esac
-fi
-EOSH
-# Date: Fri, 6 Sep 96 23:15:31 CDT
-# From: "Daniel S. Lewart" <d-lewart@uiuc.edu>
-# I looked through the gcc.info and found this:
-# * GNU CC compiled code sometimes emits warnings from the HP-UX
-# assembler of the form:
-# (warning) Use of GR3 when frame >= 8192 may cause conflict.
-# These warnings are harmless and can be safely ignored.
+## LARGEFILES
+
+#case "$uselargefiles-$ccisgcc" in
+# "$define-$define"|'-define')
+# cat <<EOM >&4
+#
+#*** I'm ignoring large files for this build because
+#*** I don't know how to do use large files in HP-UX using gcc.
+#
+#EOM
+# uselargefiles="$undef"
+# ;;
+# esac
+
+cat >UU/uselargefiles.cbu <<'EOCBU'
+# This script UU/uselargefiles.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to use large files.
+case "$uselargefiles" in
+ ""|$define|true|[yY]*)
+ # there are largefile flags available via getconf(1)
+ # but we cheat for now. (Keep that in the left margin.)
+ccflags_uselargefiles="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
+
+ ccflags="$ccflags $ccflags_uselargefiles"
+
+ if test -z "$ccisgcc" -a -z "$gccversion"; then
+ # The strict ANSI mode (-Aa) doesn't like large files.
+ ccflags=`echo " $ccflags "|sed 's@ -Aa @ @g'`
+ case "$ccflags" in
+ *-Ae*) ;;
+ *) ccflags="$ccflags -Ae" ;;
+ esac
+ fi
+ ;;
+ esac
+EOCBU
+
+# THREADING
-cat > UU/usethreads.cbu <<'EOCBU'
# This script UU/usethreads.cbu will get 'called-back' by Configure
# after it has prompted the user for whether to use threads.
+cat >UU/usethreads.cbu <<'EOCBU'
case "$usethreads" in
-$define|true|[yY]*)
- if [ "$xxOsRevMajor" -lt 10 ]; then
- cat <<EOM >&4
+ $define|true|[yY]*)
+ if [ "$xxOsRevMajor" -lt 10 ]; then
+ cat <<EOM >&4
+
HP-UX $xxOsRevMajor cannot support POSIX threads.
Consider upgrading to at least HP-UX 11.
Cannot continue, aborting.
EOM
- exit 1
- fi
- case "$xxOsRevMajor" in
- 10)
- # Under 10.X, a threaded perl can be built, but it needs
- # libcma and OLD_PTHREADS_API. Also <pthread.h> needs to
- # be #included before any other includes (in perl.h)
- if [ ! -f /usr/include/pthread.h -o ! -f /usr/lib/libcma.sl ]; then
- cat <<EOM >&4
+ exit 1
+ fi
+
+ if [ "$xxOsRevMajor" -eq 10 ]; then
+ # Under 10.X, a threaded perl can be built
+ if [ -f /usr/include/pthread.h ]; then
+ if [ -f /usr/lib/libcma.sl ]; then
+ # DCE (from Core OS CD) is installed
+
+ # It needs # libcma and OLD_PTHREADS_API. Also
+ # <pthread.h> needs to be #included before any
+ # other includes (in perl.h)
+
+ # HP-UX 10.X uses the old pthreads API
+ d_oldpthreads="$define"
+
+ # include libcma before all the others
+ libswanted="cma $libswanted"
+
+ # tell perl.h to include <pthread.h> before other
+ # include files
+ ccflags="$ccflags -DPTHREAD_H_FIRST"
+
+ # CMA redefines select to cma_select, and cma_select
+ # expects int * instead of fd_set * (just like 9.X)
+ selecttype='int *'
+
+ elif [ -f /usr/lib/libpthread.sl ]; then
+ # PTH package is installed
+ libswanted="pthread $libswanted"
+ else
+ libswanted="no_threads_available"
+ fi
+ else
+ libswanted="no_threads_available"
+ fi
+
+ if [ $libswanted = "no_threads_available" ]; then
+ cat <<EOM >&4
+
In HP-UX 10.X for POSIX threads you need both of the files
-/usr/include/pthread.h and /usr/lib/libcma.sl.
-Either you must install the CMA package or you must upgrade to HP-UX 11.
-Cannot continue, aborting.
-EOM
- exit 1
- fi
-
- # HP-UX 10.X uses the old pthreads API
- case "$d_oldpthreads" in
- '') d_oldpthreads="$define" ;;
- esac
-
- # include libcma before all the others
- libswanted="cma $libswanted"
-
- # tell perl.h to include <pthread.h> before other include files
- ccflags="$ccflags -DPTHREAD_H_FIRST"
-
- # CMA redefines select to cma_select, and cma_select expects int *
- # instead of fd_set * (just like 9.X)
- selecttype='int *'
- ;;
- 11 | 12) # 12 may want upping the _POSIX_C_SOURCE datestamp...
- ccflags=" -D_POSIX_C_SOURCE=199506L $ccflags"
- set `echo X "$libswanted "| sed -e 's/ c / pthread c /'`
- shift
- libswanted="$*"
- ;;
- esac
- usemymalloc='n'
- ;;
-esac
-EOCBU
+/usr/include/pthread.h and either /usr/lib/libcma.sl or /usr/lib/libpthread.sl.
+Either you must upgrade to HP-UX 11 or install a posix thread library:
+
+ DCE-CoreTools from HP-UX 10.20 Hardware Extensions 3.0 CD (B3920-13941)
-case "$uselargefiles-$ccisgcc" in
-"$define-$define"|'-define')
- cat <<EOM >&4
+or
-*** I'm ignoring large files for this build because
-*** I don't know how to do use large files in HP-UX using gcc.
+ PTH package from e.g. http://hpux.tn.tudelft.nl/hppd/hpux/alpha.html
+Cannot continue, aborting.
EOM
- uselargefiles="$undef"
- ;;
-esac
+ exit 1
+ fi
+ else
+ # 12 may want upping the _POSIX_C_SOURCE datestamp...
+ ccflags=" -D_POSIX_C_SOURCE=199506L $ccflags"
+ set `echo X "$libswanted "| sed -e 's/ c / pthread c /'`
+ shift
+ libswanted="$*"
+ fi
-cat > UU/uselargefiles.cbu <<'EOCBU'
-# This script UU/uselargefiles.cbu will get 'called-back' by Configure
-# after it has prompted the user for whether to use large files.
-case "$uselargefiles" in
-''|$define|true|[yY]*)
- # there are largefile flags available via getconf(1)
- # but we cheat for now.
- ccflags="$ccflags -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
-
- # The strict ANSI mode (-Aa) doesn't like large files.
- case "$ccflags" in
- -Aa*)
- echo "(Changing from strict ANSI compilation to extended because of large files)"
- ccflags=`echo $ccflags|sed 's@ -Aa @ -Ae @'`
- ;;
- *) ccflags="$ccflags -Ae" ;;
- esac
+ usemymalloc='n'
;;
-esac
+ esac
EOCBU
-
-# keep that leading tab.
- ccisgcc=''
-
https://perl5.git.perl.org / perl5.git / blobdiff