/* Flags stored in regexp->extflags
* These are used by code external to the regexp engine
*
- * Note that flags starting with RXf_PMf_ have exact equivalents
- * stored in op_pmflags and which are defined in op.h, they are defined
- * numerically here only for clarity.
+ * Note that the flags whose names start with RXf_PMf_ are defined in
+ * op_reg_common.h, being copied from the parallel flags of op_pmflags
*
- * NOTE: if you modify any RXf flags you should run regen.pl or regcomp.pl
- * so that regnodes.h is updated with the changes.
+ * NOTE: if you modify any RXf flags you should run regen.pl or
+ * regen/regcomp.pl so that regnodes.h is updated with the changes.
*
*/
-/* 0x3F of extflags is used by (RXf_)PMf_COMPILETIME
- * If you change these you need to change the equivalent flags in op.h, and
- * vice versa. */
-#define RXf_PMf_MULTILINE 0x00000001 /* /m */
-#define RXf_PMf_SINGLELINE 0x00000002 /* /s */
-#define RXf_PMf_FOLD 0x00000004 /* /i */
-#define RXf_PMf_EXTENDED 0x00000008 /* /x */
-#define RXf_PMf_KEEPCOPY 0x00000010 /* /p */
-#define RXf_PMf_LOCALE 0x00000020 /* use locale */
-/* these flags are transfered from the PMOP->op_pmflags member during compilation */
-#define RXf_PMf_STD_PMMOD_SHIFT 0
+#include "op_reg_common.h"
+
#define RXf_PMf_STD_PMMOD (RXf_PMf_MULTILINE|RXf_PMf_SINGLELINE|RXf_PMf_FOLD|RXf_PMf_EXTENDED)
-#define RXf_PMf_COMPILETIME (RXf_PMf_MULTILINE|RXf_PMf_SINGLELINE|RXf_PMf_LOCALE|RXf_PMf_FOLD|RXf_PMf_EXTENDED|RXf_PMf_KEEPCOPY)
#define CASE_STD_PMMOD_FLAGS_PARSE_SET(pmfl) \
case IGNORE_PAT_MOD: *(pmfl) |= RXf_PMf_FOLD; break; \
case SINGLE_PAT_MOD: *(pmfl) |= RXf_PMf_SINGLELINE; break; \
case XTENDED_PAT_MOD: *(pmfl) |= RXf_PMf_EXTENDED; break
+/* Note, includes locale, unicode */
+#define STD_PMMOD_FLAGS_CLEAR(pmfl) \
+ *(pmfl) &= ~(RXf_PMf_FOLD|RXf_PMf_MULTILINE|RXf_PMf_SINGLELINE|RXf_PMf_EXTENDED|RXf_PMf_LOCALE|RXf_PMf_UNICODE)
+
/* chars and strings used as regex pattern modifiers
* Singlular is a 'c'har, plural is a "string"
*
* for compatibility reasons with Regexp::Common which highjacked (?k:...)
* for its own uses. So 'k' is out as well.
*/
+#define DEFAULT_PAT_MOD '^' /* Short for all the default modifiers */
#define EXEC_PAT_MOD 'e'
#define KEEPCOPY_PAT_MOD 'p'
#define ONCE_PAT_MOD 'o'
#define SINGLE_PAT_MOD 's'
#define IGNORE_PAT_MOD 'i'
#define XTENDED_PAT_MOD 'x'
+#define NONDESTRUCT_PAT_MOD 'r'
+#define LOCALE_PAT_MOD 'l'
+#define UNICODE_PAT_MOD 'u'
+#define DUAL_PAT_MOD 'd'
#define ONCE_PAT_MODS "o"
#define KEEPCOPY_PAT_MODS "p"
#define EXEC_PAT_MODS "e"
#define LOOP_PAT_MODS "gc"
-
+#define NONDESTRUCT_PAT_MODS "r"
+#define LOCALE_PAT_MODS "l"
+#define UNICODE_PAT_MODS "u"
+#define DUAL_PAT_MODS "d"
+
+/* This string is expected by regcomp.c to be ordered so that the first
+ * character is the flag in bit RXf_PMf_STD_PMMOD_SHIFT of extflags; the next
+ * character is bit +1, etc. */
#define STD_PAT_MODS "msix"
+/* This string is expected by XS_re_regexp_pattern() in universal.c to be ordered
+ * so that the first character is the flag in bit RXf_PMf_STD_PMMOD_SHIFT of
+ * extflags; the next character is in bit +1, etc. */
#define INT_PAT_MODS STD_PAT_MODS KEEPCOPY_PAT_MODS
#define EXT_PAT_MODS ONCE_PAT_MODS KEEPCOPY_PAT_MODS
#define QR_PAT_MODS STD_PAT_MODS EXT_PAT_MODS
#define M_PAT_MODS QR_PAT_MODS LOOP_PAT_MODS
-#define S_PAT_MODS M_PAT_MODS EXEC_PAT_MODS
+#define S_PAT_MODS M_PAT_MODS EXEC_PAT_MODS NONDESTRUCT_PAT_MODS
/*
- * NOTE: if you modify any RXf flags you should run regen.pl or regcomp.pl
- * so that regnodes.h is updated with the changes.
+ * NOTE: if you modify any RXf flags you should run regen.pl or
+ * regen/regcomp.pl so that regnodes.h is updated with the changes.
*
*/
+/* Leave some space, so future bit allocations can go either in the shared or
+ * unshared area without affecting binary compatibility */
+#define RXf_BASE_SHIFT (_RXf_PMf_SHIFT_NEXT+2)
+
/* Anchor and GPOS related stuff */
-#define RXf_ANCH_BOL 0x00000100
-#define RXf_ANCH_MBOL 0x00000200
-#define RXf_ANCH_SBOL 0x00000400
-#define RXf_ANCH_GPOS 0x00000800
-#define RXf_GPOS_SEEN 0x00001000
-#define RXf_GPOS_FLOAT 0x00002000
+#define RXf_ANCH_BOL (1<<(RXf_BASE_SHIFT+0))
+#define RXf_ANCH_MBOL (1<<(RXf_BASE_SHIFT+1))
+#define RXf_ANCH_SBOL (1<<(RXf_BASE_SHIFT+2))
+#define RXf_ANCH_GPOS (1<<(RXf_BASE_SHIFT+3))
+#define RXf_GPOS_SEEN (1<<(RXf_BASE_SHIFT+4))
+#define RXf_GPOS_FLOAT (1<<(RXf_BASE_SHIFT+5))
/* two bits here */
#define RXf_ANCH (RXf_ANCH_BOL|RXf_ANCH_MBOL|RXf_ANCH_GPOS|RXf_ANCH_SBOL)
#define RXf_GPOS_CHECK (RXf_GPOS_SEEN|RXf_ANCH_GPOS)
#define RXf_ANCH_SINGLE (RXf_ANCH_SBOL|RXf_ANCH_GPOS)
/* What we have seen */
-#define RXf_LOOKBEHIND_SEEN 0x00004000
-#define RXf_EVAL_SEEN 0x00008000
-#define RXf_CANY_SEEN 0x00010000
+#define RXf_LOOKBEHIND_SEEN (1<<(RXf_BASE_SHIFT+6))
+#define RXf_EVAL_SEEN (1<<(RXf_BASE_SHIFT+7))
+#define RXf_CANY_SEEN (1<<(RXf_BASE_SHIFT+8))
/* Special */
-#define RXf_NOSCAN 0x00020000
-#define RXf_CHECK_ALL 0x00040000
+#define RXf_NOSCAN (1<<(RXf_BASE_SHIFT+9))
+#define RXf_CHECK_ALL (1<<(RXf_BASE_SHIFT+10))
/* UTF8 related */
-#define RXf_MATCH_UTF8 0x00100000
+#define RXf_MATCH_UTF8 (1<<(RXf_BASE_SHIFT+11))
/* Intuit related */
-#define RXf_USE_INTUIT_NOML 0x00200000
-#define RXf_USE_INTUIT_ML 0x00400000
-#define RXf_INTUIT_TAIL 0x00800000
+#define RXf_USE_INTUIT_NOML (1<<(RXf_BASE_SHIFT+12))
+#define RXf_USE_INTUIT_ML (1<<(RXf_BASE_SHIFT+13))
+#define RXf_INTUIT_TAIL (1<<(RXf_BASE_SHIFT+14))
/*
Set in Perl_pmruntime if op_flags & OPf_SPECIAL, i.e. split. Will
be used by regex engines to check whether they should set
RXf_SKIPWHITE
*/
-#define RXf_SPLIT 0x01000000
+#define RXf_SPLIT (1<<(RXf_BASE_SHIFT+15))
#define RXf_USE_INTUIT (RXf_USE_INTUIT_NOML|RXf_USE_INTUIT_ML)
/* Copy and tainted info */
-#define RXf_COPY_DONE 0x02000000
-#define RXf_TAINTED_SEEN 0x04000000
-#define RXf_TAINTED 0x08000000 /* this pattern is tainted */
+#define RXf_COPY_DONE (1<<(RXf_BASE_SHIFT+16))
+#define RXf_TAINTED_SEEN (1<<(RXf_BASE_SHIFT+17))
+#define RXf_TAINTED (1<<(RXf_BASE_SHIFT+18)) /* this pattern is tainted */
/* Flags indicating special patterns */
-#define RXf_START_ONLY 0x10000000 /* Pattern is /^/ */
-#define RXf_SKIPWHITE 0x20000000 /* Pattern is for a split / / */
-#define RXf_WHITE 0x40000000 /* Pattern is /\s+/ */
-#define RXf_NULL 0x80000000 /* Pattern is // */
+#define RXf_START_ONLY (1<<(RXf_BASE_SHIFT+19)) /* Pattern is /^/ */
+#define RXf_SKIPWHITE (1<<(RXf_BASE_SHIFT+20)) /* Pattern is for a split / / */
+#define RXf_WHITE (1<<(RXf_BASE_SHIFT+21)) /* Pattern is /\s+/ */
+#define RXf_NULL (1<<(RXf_BASE_SHIFT+22)) /* Pattern is // */
+#if RXf_BASE_SHIFT+22 > 31
+# error Too many RXf_PMf bits used. See regnodes.h for any spare in middle
+#endif
/*
- * NOTE: if you modify any RXf flags you should run regen.pl or regcomp.pl
- * so that regnodes.h is updated with the changes.
+ * NOTE: if you modify any RXf flags you should run regen.pl or
+ * regen/regcomp.pl so that regnodes.h is updated with the changes.
*
*/
/* this first element must match u.yes */
struct regmatch_state *prev_yes_state;
struct regmatch_state *prev_curlyx; /* previous cur_curlyx */
- regnode *A, *B; /* the nodes corresponding to /A*B/ */
+ regnode *me; /* the CURLYX node */
+ regnode *B; /* the B node in /A*B/ */
CHECKPOINT cp; /* remember current savestack index */
bool minmod;
int parenfloor;/* how far back to strip paren data */
- int min; /* the minimal number of A's to match */
- int max; /* the maximal number of A's to match */
/* these two are modified by WHILEM */
int count; /* how many instances of A we've matched */
https://perl5.git.perl.org / perl5.git / blobdiff