-BEGIN {require 5.002;} # MakeMaker 5.17 was the last MakeMaker that was compatible with perl5.001m
-
+# $Id: $
package ExtUtils::MakeMaker;
-$VERSION = "5.48_03";
-$Version_OK = "5.17"; # Makefiles older than $Version_OK will die
- # (Will be checked from MakeMaker version 4.13 onwards)
-($Revision = substr(q$Revision: 1.4 $, 10)) =~ s/\s+$//;
-
-
+BEGIN {require 5.005_03;}
require Exporter;
-use Config;
+use ExtUtils::MakeMaker::Config;
use Carp ();
+use File::Path;
use vars qw(
- @ISA @EXPORT @EXPORT_OK $AUTOLOAD
- $ISA_TTY $Revision $VERSION $Verbose $Version_OK %Config
- %Keep_after_flush %MM_Sections %Prepend_dot_dot
+ @ISA @EXPORT @EXPORT_OK
+ $VERSION $Verbose %Config
+ @Prepend_parent @Parent
%Recognized_Att_Keys @Get_from_Config @MM_Sections @Overridable
- @Parent $PACKNAME
- );
+ $Filename
+ );
+
+# Has to be on its own line with no $ after it to avoid being noticed by
+# the version control system
+use vars qw($Revision);
use strict;
-# &DynaLoader::mod2fname should be available to miniperl, thus
-# should be a pseudo-builtin (cmp. os2.c).
-#eval {require DynaLoader;};
+$VERSION = '6.28';
+($Revision = q$Revision: 4409 $) =~ /Revision:\s+(\S+)/;
-#
-# Set up the inheritance before we pull in the MM_* packages, because they
-# import variables and functions from here
-#
@ISA = qw(Exporter);
@EXPORT = qw(&WriteMakefile &writeMakefile $Verbose &prompt);
-@EXPORT_OK = qw($VERSION &Version_check &neatvalue &mkbootstrap &mksymlists);
-
-#
-# Dummy package MM inherits actual methods from OS-specific
-# default packages. We use this intermediate package so
-# MY::XYZ->func() can call MM->func() and get the proper
-# default routine without having to know under what OS
-# it's running.
-#
-@MM::ISA = qw[ExtUtils::MM_Unix ExtUtils::Liblist::Kid ExtUtils::MakeMaker];
+@EXPORT_OK = qw($VERSION &neatvalue &mkbootstrap &mksymlists);
-#
-# Setup dummy package:
-# MY exists for overriding methods to be defined within
-#
-{
- package MY;
- @MY::ISA = qw(MM);
-### sub AUTOLOAD { use Devel::Symdump; print Devel::Symdump->rnew->as_string; Carp::confess "hey why? $AUTOLOAD" }
- package MM;
- sub DESTROY {}
-}
-
-# "predeclare the package: we only load it via AUTOLOAD
-# but we have already mentioned it in @ISA
-package ExtUtils::Liblist::Kid;
-
-package ExtUtils::MakeMaker;
-#
-# Now we can pull in the friends
-#
+# These will go away once the last of the Win32 & VMS specific code is
+# purged.
my $Is_VMS = $^O eq 'VMS';
-my $Is_OS2 = $^O eq 'os2';
-my $Is_Mac = $^O eq 'MacOS';
my $Is_Win32 = $^O eq 'MSWin32';
-my $Is_Cygwin = $^O eq 'cygwin';
-my $Is_NetWare = $Config{osname} eq 'NetWare'; # $Config{osname} intentional
-my $Is_BeOS = $^O =~ /beos/i; # XXX should this be that loose?
-require ExtUtils::MM_Unix;
-
-if ($Is_VMS) {
- require ExtUtils::MM_VMS;
- require VMS::Filespec; # is a noop as long as we require it within MM_VMS
-}
-if ($Is_OS2) {
- require ExtUtils::MM_OS2;
-}
-if ($Is_Mac) {
- require ExtUtils::MM_MacOS;
-}
-if ($Is_NetWare) {
- require ExtUtils::MM_NW5;
- $Is_Win32 = 0;
-}
-if ($Is_Win32) {
- require ExtUtils::MM_Win32;
-}
-if ($Is_Cygwin) {
- require ExtUtils::MM_Cygwin;
-}
-if ($Is_BeOS) {
- require ExtUtils::MM_BeOS;
-}
+# Our filename for diagnostic and debugging purposes. More reliable
+# than %INC (think caseless filesystems)
+$Filename = __FILE__;
full_setup();
-# The use of the Version_check target has been dropped between perl
-# 5.5.63 and 5.5.64. We must keep the subroutine for a while so that
-# old Makefiles can satisfy the Version_check target.
-
-sub Version_check {
- my($checkversion) = @_;
- die "Your Makefile was built with ExtUtils::MakeMaker v $checkversion.
-Current Version is $ExtUtils::MakeMaker::VERSION. There have been considerable
-changes in the meantime.
-Please rerun 'perl Makefile.PL' to regenerate the Makefile.\n"
- if $checkversion < $Version_OK;
- printf STDOUT "%s %s %s %s.\n", "Makefile built with ExtUtils::MakeMaker v",
- $checkversion, "Current Version is", $VERSION
- unless $checkversion == $VERSION;
-}
+require ExtUtils::MM; # Things like CPAN assume loading ExtUtils::MakeMaker
+ # will give them MM.
+
+require ExtUtils::MY; # XXX pre-5.8 versions of ExtUtils::Embed expect
+ # loading ExtUtils::MakeMaker will give them MY.
+ # This will go when Embed is it's own CPAN module.
-sub warnhandler {
- $_[0] =~ /^Use of uninitialized value/ && return;
- $_[0] =~ /used only once/ && return;
- $_[0] =~ /^Subroutine\s+[\w:]+\s+redefined/ && return;
- warn @_;
-}
sub WriteMakefile {
Carp::croak "WriteMakefile: Need even number of args" if @_ % 2;
- local $SIG{__WARN__} = \&warnhandler;
+ require ExtUtils::MY;
my %att = @_;
- MM->new(\%att)->flush;
+
+ _verify_att(\%att);
+
+ my $mm = MM->new(\%att);
+ $mm->flush;
+
+ return $mm;
+}
+
+
+# Basic signatures of the attributes WriteMakefile takes. Each is the
+# reference type. Empty value indicate it takes a non-reference
+# scalar.
+my %Att_Sigs;
+my %Special_Sigs = (
+ C => 'array',
+ CONFIG => 'array',
+ CONFIGURE => 'code',
+ DIR => 'array',
+ DL_FUNCS => 'hash',
+ DL_VARS => 'array',
+ EXCLUDE_EXT => 'array',
+ EXE_FILES => 'array',
+ FUNCLIST => 'array',
+ H => 'array',
+ IMPORTS => 'hash',
+ INCLUDE_EXT => 'array',
+ LIBS => ['array',''],
+ MAN1PODS => 'hash',
+ MAN3PODS => 'hash',
+ PL_FILES => 'hash',
+ PM => 'hash',
+ PMLIBDIRS => 'array',
+ PREREQ_PM => 'hash',
+ SKIP => 'array',
+ TYPEMAPS => 'array',
+ XS => 'hash',
+ _KEEP_AFTER_FLUSH => '',
+
+ clean => 'hash',
+ depend => 'hash',
+ dist => 'hash',
+ dynamic_lib=> 'hash',
+ linkext => 'hash',
+ macro => 'hash',
+ postamble => 'hash',
+ realclean => 'hash',
+ test => 'hash',
+ tool_autosplit => 'hash',
+);
+
+@Att_Sigs{keys %Recognized_Att_Keys} = ('') x keys %Recognized_Att_Keys;
+@Att_Sigs{keys %Special_Sigs} = values %Special_Sigs;
+
+
+sub _verify_att {
+ my($att) = @_;
+
+ while( my($key, $val) = each %$att ) {
+ my $sig = $Att_Sigs{$key};
+ unless( defined $sig ) {
+ warn "WARNING: $key is not a known parameter.\n";
+ next;
+ }
+
+ my @sigs = ref $sig ? @$sig : $sig;
+ my $given = lc ref $val;
+ unless( grep $given eq $_, @sigs ) {
+ my $takes = join " or ", map { $_ ne '' ? "$_ reference"
+ : "string/number"
+ } @sigs;
+ my $has = $given ne '' ? "$given reference"
+ : "string/number";
+ warn "WARNING: $key takes a $takes not a $has.\n".
+ " Please inform the author.\n";
+ }
+ }
}
sub prompt ($;$) {
- my($mess,$def)=@_;
- $ISA_TTY = -t STDIN && (-t STDOUT || !(-f STDOUT || -c STDOUT)) ; # Pipe?
- Carp::confess("prompt function called without an argument") unless defined $mess;
+ my($mess, $def) = @_;
+ Carp::confess("prompt function called without an argument")
+ unless defined $mess;
+
+ my $isa_tty = -t STDIN && (-t STDOUT || !(-f STDOUT || -c STDOUT)) ;
+
my $dispdef = defined $def ? "[$def] " : " ";
$def = defined $def ? $def : "";
- my $ans;
+
local $|=1;
+ local $\;
print "$mess $dispdef";
- if ($ISA_TTY && !$ENV{PERL_MM_USE_DEFAULT}) {
- chomp($ans = <STDIN>);
- } else {
- print "$def\n";
+
+ my $ans;
+ if ($ENV{PERL_MM_USE_DEFAULT} || (!$isa_tty && eof STDIN)) {
+ print "$def\n";
+ }
+ else {
+ $ans = <STDIN>;
+ if( defined $ans ) {
+ chomp $ans;
+ }
+ else { # user hit ctrl-D
+ print "\n";
+ }
}
- return ($ans ne '') ? $ans : $def;
+
+ return (!defined $ans || $ans eq '') ? $def : $ans;
}
sub eval_in_subdirs {
my($self) = @_;
use Cwd qw(cwd abs_path);
- my $pwd = cwd();
+ my $pwd = cwd() || die "Can't figure out your cwd!";
+
local @INC = map eval {abs_path($_) if -e} || $_, @INC;
+ push @INC, '.'; # '.' has to always be at the end of @INC
foreach my $dir (@{$self->{DIR}}){
- my($abs) = $self->catdir($pwd,$dir);
- $self->eval_in_x($abs);
+ my($abs) = $self->catdir($pwd,$dir);
+ eval { $self->eval_in_x($abs); };
+ last if $@;
}
chdir $pwd;
+ die $@ if $@;
}
sub eval_in_x {
my($self,$dir) = @_;
- package main;
chdir $dir or Carp::carp("Couldn't change to directory $dir: $!");
- eval { do './Makefile.PL' };
+ {
+ package main;
+ do './Makefile.PL';
+ };
if ($@) {
-# if ($@ =~ /prerequisites/) {
-# die "MakeMaker WARNING: $@";
-# } else {
-# warn "WARNING from evaluation of $dir/Makefile.PL: $@";
-# }
- warn "WARNING from evaluation of $dir/Makefile.PL: $@";
+# if ($@ =~ /prerequisites/) {
+# die "MakeMaker WARNING: $@";
+# } else {
+# warn "WARNING from evaluation of $dir/Makefile.PL: $@";
+# }
+ die "ERROR from evaluation of $dir/Makefile.PL: $@";
}
}
+
+# package name for the classes into which the first object will be blessed
+my $PACKNAME = 'PACK000';
+
sub full_setup {
$Verbose ||= 0;
- # package name for the classes into which the first object will be blessed
- $PACKNAME = "PACK000";
-
my @attrib_help = qw/
AUTHOR ABSTRACT ABSTRACT_FROM BINARY_LOCATION
C CAPI CCFLAGS CONFIG CONFIGURE DEFINE DIR DISTNAME DL_FUNCS DL_VARS
- EXCLUDE_EXT EXE_FILES FIRST_MAKEFILE FULLPERL FUNCLIST H
- HTMLLIBPODS HTMLSCRIPTPODS IMPORTS
- INC INCLUDE_EXT INSTALLARCHLIB INSTALLBIN INSTALLDIRS INSTALLHTMLPRIVLIBDIR
- INSTALLHTMLSCRIPTDIR INSTALLHTMLSITELIBDIR INSTALLMAN1DIR
- INSTALLMAN3DIR INSTALLPRIVLIB INSTALLSCRIPT INSTALLSITEARCH
- INSTALLSITELIB INST_ARCHLIB INST_BIN INST_EXE INST_LIB
- INST_HTMLLIBDIR INST_HTMLSCRIPTDIR
- INST_MAN1DIR INST_MAN3DIR INST_SCRIPT LDFROM LIB LIBPERL_A LIBS
- LINKTYPE MAKEAPERL MAKEFILE MAN1PODS MAN3PODS MAP_TARGET MYEXTLIB
- PERL_MALLOC_OK
- NAME NEEDS_LINKING NOECHO NORECURS NO_VC OBJECT OPTIMIZE PERL PERLMAINCC
- PERLRUN PERLRUNINST PERL_ARCHLIB PERL_CORE
- PERL_LIB PERL_SRC PERM_RW PERM_RWX
+ EXCLUDE_EXT EXE_FILES FIRST_MAKEFILE
+ FULLPERL FULLPERLRUN FULLPERLRUNINST
+ FUNCLIST H IMPORTS
+
+ INST_ARCHLIB INST_SCRIPT INST_BIN INST_LIB INST_MAN1DIR INST_MAN3DIR
+ INSTALLDIRS
+ DESTDIR PREFIX INSTALLBASE
+ PERLPREFIX SITEPREFIX VENDORPREFIX
+ INSTALLPRIVLIB INSTALLSITELIB INSTALLVENDORLIB
+ INSTALLARCHLIB INSTALLSITEARCH INSTALLVENDORARCH
+ INSTALLBIN INSTALLSITEBIN INSTALLVENDORBIN
+ INSTALLMAN1DIR INSTALLMAN3DIR
+ INSTALLSITEMAN1DIR INSTALLSITEMAN3DIR
+ INSTALLVENDORMAN1DIR INSTALLVENDORMAN3DIR
+ INSTALLSCRIPT
+ PERL_LIB PERL_ARCHLIB
+ SITELIBEXP SITEARCHEXP
+
+ INC INCLUDE_EXT LDFROM LIB LIBPERL_A LIBS
+ LINKTYPE MAKEAPERL MAKEFILE MAKEFILE_OLD MAN1PODS MAN3PODS MAP_TARGET
+ MYEXTLIB NAME NEEDS_LINKING NOECHO NO_META NORECURS NO_VC OBJECT OPTIMIZE
+ PERL_MALLOC_OK PERL PERLMAINCC PERLRUN PERLRUNINST PERL_CORE
+ PERL_SRC PERM_RW PERM_RWX
PL_FILES PM PM_FILTER PMLIBDIRS POLLUTE PPM_INSTALL_EXEC
- PPM_INSTALL_SCRIPT PREFIX
- PREREQ_FATAL PREREQ_PM PREREQ_PRINT PRINT_PREREQ
- SKIP TEST_LIBS TYPEMAPS VERSION VERSION_FROM XS XSOPT XSPROTOARG
+ PPM_INSTALL_SCRIPT PREREQ_FATAL PREREQ_PM PREREQ_PRINT PRINT_PREREQ
+ SIGN SKIP TYPEMAPS VERSION VERSION_FROM XS XSOPT XSPROTOARG
XS_VERSION clean depend dist dynamic_lib linkext macro realclean
tool_autosplit
+
MACPERL_SRC MACPERL_LIB MACLIBS_68K MACLIBS_PPC MACLIBS_SC MACLIBS_MRC
MACLIBS_ALL_68K MACLIBS_ALL_PPC MACLIBS_SHARED
- /;
+ /;
# IMPORTS is used under OS/2 and Win32
@MM_Sections =
- qw(
+ qw(
+
+ post_initialize const_config constants platform_constants
+ tool_autosplit tool_xsubpp tools_other
+
+ makemakerdflt
- post_initialize const_config constants tool_autosplit tool_xsubpp
- tools_other dist macro depend cflags const_loadlibs const_cccmd
+ dist macro depend cflags const_loadlibs const_cccmd
post_constants
pasthru
- c_o xs_c xs_o top_targets linkext dlsyms dynamic dynamic_bs
- dynamic_lib static static_lib htmlifypods manifypods processPL
+ special_targets
+ c_o xs_c xs_o
+ top_targets blibdirs linkext dlsyms dynamic dynamic_bs
+ dynamic_lib static static_lib manifypods processPL
installbin subdirs
- clean realclean dist_basics dist_core dist_dir dist_test dist_ci
+ clean_subdirs clean realclean_subdirs realclean
+ metafile signature
+ dist_basics dist_core distdir dist_test dist_ci distmeta distsignature
install force perldepend makefile staticmake test ppd
- ); # loses section ordering
+ ); # loses section ordering
@Overridable = @MM_Sections;
push @Overridable, qw[
- dir_target libscan makeaperl needs_linking perm_rw perm_rwx
- subdir_x test_via_harness test_via_script
- ];
+ libscan makeaperl needs_linking perm_rw perm_rwx
+ subdir_x test_via_harness test_via_script init_PERL
+ ];
push @MM_Sections, qw[
pm_to_blib selfdocument
- ];
+ ];
# Postamble needs to be the last that was always the case
push @MM_Sections, "postamble";
# we will use all these variables in the Makefile
@Get_from_Config =
- qw(
- ar cc cccdlflags ccdlflags dlext dlsrc ld lddlflags ldflags libc
- lib_ext obj_ext osname osvers ranlib sitelibexp sitearchexp so
- exe_ext full_ar
- );
+ qw(
+ ar cc cccdlflags ccdlflags dlext dlsrc ld lddlflags ldflags libc
+ lib_ext obj_ext osname osvers ranlib sitelibexp sitearchexp so
+ exe_ext full_ar
+ );
+
+ # 5.5.3 doesn't have any concept of vendor libs
+ push @Get_from_Config, qw( vendorarchexp vendorlibexp ) if $] >= 5.006;
foreach my $item (@attrib_help){
- $Recognized_Att_Keys{$item} = 1;
+ $Recognized_Att_Keys{$item} = 1;
}
foreach my $item (@Get_from_Config) {
- $Recognized_Att_Keys{uc $item} = $Config{$item};
- print "Attribute '\U$item\E' => '$Config{$item}'\n"
- if ($Verbose >= 2);
+ $Recognized_Att_Keys{uc $item} = $Config{$item};
+ print "Attribute '\U$item\E' => '$Config{$item}'\n"
+ if ($Verbose >= 2);
}
#
# us (the parent) for the values and will prepend "..", so that
# all files to be installed end up below OUR ./blib
#
- %Prepend_dot_dot =
- qw(
-
- INST_BIN 1 INST_EXE 1 INST_LIB 1 INST_ARCHLIB 1 INST_SCRIPT 1
- MAP_TARGET 1 INST_HTMLLIBDIR 1 INST_HTMLSCRIPTDIR 1
- INST_MAN1DIR 1 INST_MAN3DIR 1 PERL_SRC 1 PERL 1 FULLPERL 1
-
- );
-
- my @keep = qw/
- NEEDS_LINKING HAS_LINK_CODE
- /;
- @Keep_after_flush{@keep} = (1) x @keep;
+ @Prepend_parent = qw(
+ INST_BIN INST_LIB INST_ARCHLIB INST_SCRIPT
+ MAP_TARGET INST_MAN1DIR INST_MAN3DIR PERL_SRC
+ PERL FULLPERL
+ );
}
sub writeMakefile {
END
}
-sub ExtUtils::MakeMaker::new {
+sub new {
my($class,$self) = @_;
my($key);
+ # Store the original args passed to WriteMakefile()
+ foreach my $k (keys %$self) {
+ $self->{ARGS}{$k} = $self->{$k};
+ }
+
if ("@ARGV" =~ /\bPREREQ_PRINT\b/) {
- require Data::Dumper;
+ require Data::Dumper;
print Data::Dumper->Dump([$self->{PREREQ_PM}], [qw(PREREQ_PM)]);
- }
+ exit 0;
+ }
# PRINT_PREREQ is RedHatism.
if ("@ARGV" =~ /\bPRINT_PREREQ\b/) {
- print join(" ", map { "perl($_)>=$self->{PREREQ_PM}->{$_} " } sort keys %{$self->{PREREQ_PM}}), "\n";
- exit 0;
+ print join(" ", map { "perl($_)>=$self->{PREREQ_PM}->{$_} " }
+ sort keys %{$self->{PREREQ_PM}}), "\n";
+ exit 0;
}
print STDOUT "MakeMaker (v$VERSION)\n" if $Verbose;
if (-f "MANIFEST" && ! -f "Makefile"){
- check_manifest();
+ check_manifest();
}
$self = {} unless (defined $self);
my(%unsatisfied) = ();
foreach my $prereq (sort keys %{$self->{PREREQ_PM}}) {
- eval "require $prereq";
-
- if ($@) {
- warn "Warning: prerequisite $prereq $self->{PREREQ_PM}->{$prereq} not found.\n" unless $self->{PREREQ_FATAL};
- $unsatisfied{$prereq} = 'not installed';
- } elsif ($prereq->VERSION < $self->{PREREQ_PM}->{$prereq} ){
- warn "Warning: prerequisite $prereq $self->{PREREQ_PM}->{$prereq} not found. We have "
- . ($prereq->VERSION || 'unknown version') unless $self->{PREREQ_FATAL};
- $unsatisfied{$prereq} = $self->{PREREQ_PM}->{$prereq} ? $self->{PREREQ_PM}->{$prereq} : 'unknown version' ;
- }
+ # 5.8.0 has a bug with require Foo::Bar alone in an eval, so an
+ # extra statement is a workaround.
+ my $file = "$prereq.pm";
+ $file =~ s{::}{/}g;
+ eval { require $file };
+
+ my $pr_version = $prereq->VERSION || 0;
+
+ # convert X.Y_Z alpha version #s to X.YZ for easier comparisons
+ $pr_version =~ s/(\d+)\.(\d+)_(\d+)/$1.$2$3/;
+
+ if ($@) {
+ warn sprintf "Warning: prerequisite %s %s not found.\n",
+ $prereq, $self->{PREREQ_PM}{$prereq}
+ unless $self->{PREREQ_FATAL};
+ $unsatisfied{$prereq} = 'not installed';
+ } elsif ($pr_version < $self->{PREREQ_PM}->{$prereq} ){
+ warn sprintf "Warning: prerequisite %s %s not found. We have %s.\n",
+ $prereq, $self->{PREREQ_PM}{$prereq},
+ ($pr_version || 'unknown version')
+ unless $self->{PREREQ_FATAL};
+ $unsatisfied{$prereq} = $self->{PREREQ_PM}->{$prereq} ?
+ $self->{PREREQ_PM}->{$prereq} : 'unknown version' ;
+ }
}
if (%unsatisfied && $self->{PREREQ_FATAL}){
-# unless (defined $ExtUtils::MakeMaker::useCPAN) {
- my $failedprereqs = join ', ', map {"$_ $unsatisfied{$_}"} keys %unsatisfied;
- die qq{MakeMaker FATAL: prerequisites not found ($failedprereqs)
- Please install these modules first and rerun 'perl Makefile.PL'.\n};
-# if ($ExtUtils::MakeMaker::hasCPAN) {
-# $ExtUtils::MakeMaker::useCPAN = prompt(qq{Should I try to use the CPAN module to fetch them for you?},"yes");
-# } else {
-# print qq{Hint: You may want to install the CPAN module to autofetch the needed modules\n};
-# $ExtUtils::MakeMaker::useCPAN=0;
-# }
-# }
-# if ($ExtUtils::MakeMaker::useCPAN) {
-# require CPAN;
-# CPAN->import(@unsatisfied);
-# } else {
-# die qq{prerequisites not found (@unsatisfied)};
-# }
-# warn qq{WARNING: prerequisites not found (@unsatisfied)};
+ my $failedprereqs = join ', ', map {"$_ $unsatisfied{$_}"}
+ keys %unsatisfied;
+ die qq{MakeMaker FATAL: prerequisites not found ($failedprereqs)\n
+ Please install these modules first and rerun 'perl Makefile.PL'.\n};
}
if (defined $self->{CONFIGURE}) {
- if (ref $self->{CONFIGURE} eq 'CODE') {
- %configure_att = %{&{$self->{CONFIGURE}}};
- $self = { %$self, %configure_att };
- } else {
- Carp::croak "Attribute 'CONFIGURE' to WriteMakefile() not a code reference\n";
- }
+ if (ref $self->{CONFIGURE} eq 'CODE') {
+ %configure_att = %{&{$self->{CONFIGURE}}};
+ $self = { %$self, %configure_att };
+ } else {
+ Carp::croak "Attribute 'CONFIGURE' to WriteMakefile() not a code reference\n";
+ }
}
# This is for old Makefiles written pre 5.00, will go away
if ( Carp::longmess("") =~ /runsubdirpl/s ){
- Carp::carp("WARNING: Please rerun 'perl Makefile.PL' to regenerate your Makefiles\n");
+ Carp::carp("WARNING: Please rerun 'perl Makefile.PL' to regenerate your Makefiles\n");
}
my $newclass = ++$PACKNAME;
- local @Parent = @Parent; # Protect against non-local exits
+ local @Parent = @Parent; # Protect against non-local exits
{
- no strict 'refs';
- print "Blessing Object into class [$newclass]\n" if $Verbose>=2;
- mv_all_methods("MY",$newclass);
- bless $self, $newclass;
- push @Parent, $self;
- @{"$newclass\:\:ISA"} = 'MM';
+ no strict 'refs';
+ print "Blessing Object into class [$newclass]\n" if $Verbose>=2;
+ mv_all_methods("MY",$newclass);
+ bless $self, $newclass;
+ push @Parent, $self;
+ require ExtUtils::MY;
+ @{"$newclass\:\:ISA"} = 'MM';
}
if (defined $Parent[-2]){
- $self->{PARENT} = $Parent[-2];
- my $key;
- for $key (keys %Prepend_dot_dot) {
- next unless defined $self->{PARENT}{$key};
- $self->{$key} = $self->{PARENT}{$key};
- unless ($^O eq 'VMS' && $key =~ /PERL$/) {
- $self->{$key} = $self->catdir("..",$self->{$key})
- unless $self->file_name_is_absolute($self->{$key});
- } else {
- # PERL or FULLPERL will be a command verb or even a command with
- # an argument instead of a full file specification under VMS. So,
- # don't turn the command into a filespec, but do add a level to the
- # path of the argument if not already absolute.
-
- my @cmd = split /\s+/, $self->{$key};
- $cmd[1] = $self->catfile('[-]',$cmd[1])
- unless (scalar(@cmd) < 2 || $self->file_name_is_absolute($cmd[1]));
- $self->{$key} = join(' ', @cmd);
- }
- }
- if ($self->{PARENT}) {
- $self->{PARENT}->{CHILDREN}->{$newclass} = $self;
- foreach my $opt (qw(POLLUTE PERL_CORE)) {
- if (exists $self->{PARENT}->{$opt}
- and not exists $self->{$opt})
- {
- # inherit, but only if already unspecified
- $self->{$opt} = $self->{PARENT}->{$opt};
- }
- }
- }
- my @fm = grep /^FIRST_MAKEFILE=/, @ARGV;
- parse_args($self,@fm) if @fm;
+ $self->{PARENT} = $Parent[-2];
+ my $key;
+ for $key (@Prepend_parent) {
+ next unless defined $self->{PARENT}{$key};
+
+ # Don't stomp on WriteMakefile() args.
+ next if defined $self->{ARGS}{$key} and
+ $self->{ARGS}{$key} eq $self->{$key};
+
+ $self->{$key} = $self->{PARENT}{$key};
+
+ unless ($Is_VMS && $key =~ /PERL$/) {
+ $self->{$key} = $self->catdir("..",$self->{$key})
+ unless $self->file_name_is_absolute($self->{$key});
+ } else {
+ # PERL or FULLPERL will be a command verb or even a
+ # command with an argument instead of a full file
+ # specification under VMS. So, don't turn the command
+ # into a filespec, but do add a level to the path of
+ # the argument if not already absolute.
+ my @cmd = split /\s+/, $self->{$key};
+ $cmd[1] = $self->catfile('[-]',$cmd[1])
+ unless (@cmd < 2) || $self->file_name_is_absolute($cmd[1]);
+ $self->{$key} = join(' ', @cmd);
+ }
+ }
+ if ($self->{PARENT}) {
+ $self->{PARENT}->{CHILDREN}->{$newclass} = $self;
+ foreach my $opt (qw(POLLUTE PERL_CORE)) {
+ if (exists $self->{PARENT}->{$opt}
+ and not exists $self->{$opt})
+ {
+ # inherit, but only if already unspecified
+ $self->{$opt} = $self->{PARENT}->{$opt};
+ }
+ }
+ }
+ my @fm = grep /^FIRST_MAKEFILE=/, @ARGV;
+ parse_args($self,@fm) if @fm;
} else {
- parse_args($self,split(' ', $ENV{PERL_MM_OPT} || ''),@ARGV);
+ parse_args($self,split(' ', $ENV{PERL_MM_OPT} || ''),@ARGV);
}
$self->{NAME} ||= $self->guess_name;
($self->{NAME_SYM} = $self->{NAME}) =~ s/\W+/_/g;
- $self->init_main();
+ $self->init_main;
+ $self->init_VERSION;
+ $self->init_dist;
+ $self->init_INST;
+ $self->init_INSTALL;
+ $self->init_DEST;
+ $self->init_dirscan;
+ $self->init_xs;
+ $self->init_PERL;
+ $self->init_DIRFILESEP;
+ $self->init_linker;
if (! $self->{PERL_SRC} ) {
- my($pthinks) = $self->canonpath($INC{'Config.pm'});
- my($cthinks) = $self->catfile($Config{'archlibexp'},'Config.pm');
- $pthinks = VMS::Filespec::vmsify($pthinks) if $Is_VMS;
- if ($pthinks ne $cthinks &&
- !($Is_Win32 and lc($pthinks) eq lc($cthinks))) {
+ require VMS::Filespec if $Is_VMS;
+ my($pthinks) = $self->canonpath($INC{'Config.pm'});
+ my($cthinks) = $self->catfile($Config{'archlibexp'},'Config.pm');
+ $pthinks = VMS::Filespec::vmsify($pthinks) if $Is_VMS;
+ if ($pthinks ne $cthinks &&
+ !($Is_Win32 and lc($pthinks) eq lc($cthinks))) {
print "Have $pthinks expected $cthinks\n";
- if ($Is_Win32) {
- $pthinks =~ s![/\\]Config\.pm$!!i; $pthinks =~ s!.*[/\\]!!;
- }
- else {
- $pthinks =~ s!/Config\.pm$!!; $pthinks =~ s!.*/!!;
- }
- print STDOUT <<END unless $self->{UNINSTALLED_PERL};
-Your perl and your Config.pm seem to have different ideas about the architecture
-they are running on.
+ if ($Is_Win32) {
+ $pthinks =~ s![/\\]Config\.pm$!!i; $pthinks =~ s!.*[/\\]!!;
+ }
+ else {
+ $pthinks =~ s!/Config\.pm$!!; $pthinks =~ s!.*/!!;
+ }
+ print STDOUT <<END unless $self->{UNINSTALLED_PERL};
+Your perl and your Config.pm seem to have different ideas about the
+architecture they are running on.
Perl thinks: [$pthinks]
Config says: [$Config{archname}]
-This may or may not cause problems. Please check your installation of perl if you
-have problems building this extension.
+This may or may not cause problems. Please check your installation of perl
+if you have problems building this extension.
END
- }
+ }
}
- $self->init_dirscan();
$self->init_others();
+ $self->init_platform();
+ $self->init_PERM();
my($argv) = neatvalue(\@ARGV);
$argv =~ s/^\[/(/;
$argv =~ s/\]$/)/;
# $VERSION (Revision: $Revision) from the contents of
# Makefile.PL. Don't edit this file, edit Makefile.PL instead.
#
-# ANY CHANGES MADE HERE WILL BE LOST!
+# ANY CHANGES MADE HERE WILL BE LOST!
#
# MakeMaker ARGV: $argv
#
END
foreach my $key (sort keys %initial_att){
- my($v) = neatvalue($initial_att{$key});
- $v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/;
- $v =~ tr/\n/ /s;
- push @{$self->{RESULT}}, "# $key => $v";
+ next if $key eq 'ARGS';
+
+ my($v) = neatvalue($initial_att{$key});
+ $v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/;
+ $v =~ tr/\n/ /s;
+ push @{$self->{RESULT}}, "# $key => $v";
}
undef %initial_att; # free memory
END
if (scalar(keys %configure_att) > 0) {
foreach my $key (sort keys %configure_att){
+ next if $key eq 'ARGS';
my($v) = neatvalue($configure_att{$key});
$v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/;
$v =~ tr/\n/ /s;
# turn the SKIP array into a SKIPHASH hash
my (%skip,$skip);
for $skip (@{$self->{SKIP} || []}) {
- $self->{SKIPHASH}{$skip} = 1;
+ $self->{SKIPHASH}{$skip} = 1;
}
delete $self->{SKIP}; # free memory
if ($self->{PARENT}) {
- for (qw/install dist dist_basics dist_core dist_dir dist_test dist_ci/) {
- $self->{SKIPHASH}{$_} = 1;
- }
+ for (qw/install dist dist_basics dist_core distdir dist_test dist_ci/) {
+ $self->{SKIPHASH}{$_} = 1;
+ }
}
# We run all the subdirectories now. They don't have much to query
# from the parent, but the parent has to query them: if they need linking!
unless ($self->{NORECURS}) {
- $self->eval_in_subdirs if @{$self->{DIR}};
+ $self->eval_in_subdirs if @{$self->{DIR}};
}
foreach my $section ( @MM_Sections ){
- print "Processing Makefile '$section' section\n" if ($Verbose >= 2);
- my($skipit) = $self->skipcheck($section);
- if ($skipit){
- push @{$self->{RESULT}}, "\n# --- MakeMaker $section section $skipit.";
- } else {
- my(%a) = %{$self->{$section} || {}};
- push @{$self->{RESULT}}, "\n# --- MakeMaker $section section:";
- push @{$self->{RESULT}}, "# " . join ", ", %a if $Verbose && %a;
- push @{$self->{RESULT}}, $self->nicetext($self->$section( %a ));
- }
+ # Support for new foo_target() methods.
+ my $method = $section;
+ $method .= '_target' unless $self->can($method);
+
+ print "Processing Makefile '$section' section\n" if ($Verbose >= 2);
+ my($skipit) = $self->skipcheck($section);
+ if ($skipit){
+ push @{$self->{RESULT}}, "\n# --- MakeMaker $section section $skipit.";
+ } else {
+ my(%a) = %{$self->{$section} || {}};
+ push @{$self->{RESULT}}, "\n# --- MakeMaker $section section:";
+ push @{$self->{RESULT}}, "# " . join ", ", %a if $Verbose && %a;
+ push @{$self->{RESULT}}, $self->nicetext($self->$method( %a ));
+ }
}
push @{$self->{RESULT}}, "\n# End.";
sub WriteEmptyMakefile {
Carp::croak "WriteEmptyMakefile: Need even number of args" if @_ % 2;
- local $SIG{__WARN__} = \&warnhandler;
my %att = @_;
my $self = MM->new(\%att);
- if (-f "$self->{MAKEFILE}.old") {
- chmod 0666, "$self->{MAKEFILE}.old";
- unlink "$self->{MAKEFILE}.old" or warn "unlink $self->{MAKEFILE}.old: $!";
+ if (-f $self->{MAKEFILE_OLD}) {
+ _unlink($self->{MAKEFILE_OLD}) or
+ warn "unlink $self->{MAKEFILE_OLD}: $!";
+ }
+ if ( -f $self->{MAKEFILE} ) {
+ _rename($self->{MAKEFILE}, $self->{MAKEFILE_OLD}) or
+ warn "rename $self->{MAKEFILE} => $self->{MAKEFILE_OLD}: $!"
}
- rename $self->{MAKEFILE}, "$self->{MAKEFILE}.old"
- or warn "rename $self->{MAKEFILE} $self->{MAKEFILE}.old: $!"
- if -f $self->{MAKEFILE};
- open MF, '>', $self->{MAKEFILE} or die "open $self->{MAKEFILE} for write: $!";
+ open MF, '>'.$self->{MAKEFILE} or die "open $self->{MAKEFILE} for write: $!";
print MF <<'EOP';
all:
$ExtUtils::Manifest::Quiet = $ExtUtils::Manifest::Quiet = 1;
my(@missed) = ExtUtils::Manifest::manicheck();
if (@missed) {
- print STDOUT "Warning: the following files are missing in your kit:\n";
- print "\t", join "\n\t", @missed;
- print STDOUT "\n";
- print STDOUT "Please inform the author.\n";
+ print STDOUT "Warning: the following files are missing in your kit:\n";
+ print "\t", join "\n\t", @missed;
+ print STDOUT "\n";
+ print STDOUT "Please inform the author.\n";
} else {
- print STDOUT "Looks good\n";
+ print STDOUT "Looks good\n";
}
}
sub parse_args{
my($self, @args) = @_;
foreach (@args) {
- unless (m/(.*?)=(.*)/) {
- help(),exit 1 if m/^help$/;
- ++$Verbose if m/^verb/;
- next;
- }
- my($name, $value) = ($1, $2);
- if ($value =~ m/^~(\w+)?/) { # tilde with optional username
- $value =~ s [^~(\w*)]
- [$1 ?
- ((getpwnam($1))[7] || "~$1") :
- (getpwuid($>))[7]
- ]ex;
- }
- $self->{uc($name)} = $value;
+ unless (m/(.*?)=(.*)/) {
+ ++$Verbose if m/^verb/;
+ next;
+ }
+ my($name, $value) = ($1, $2);
+ if ($value =~ m/^~(\w+)?/) { # tilde with optional username
+ $value =~ s [^~(\w*)]
+ [$1 ?
+ ((getpwnam($1))[7] || "~$1") :
+ (getpwuid($>))[7]
+ ]ex;
+ }
+
+ # Remember the original args passed it. It will be useful later.
+ $self->{ARGS}{uc $name} = $self->{uc $name} = $value;
}
# catch old-style 'potential_libs' and inform user how to 'upgrade'
if (defined $self->{potential_libs}){
- my($msg)="'potential_libs' => '$self->{potential_libs}' should be";
- if ($self->{potential_libs}){
- print STDOUT "$msg changed to:\n\t'LIBS' => ['$self->{potential_libs}']\n";
- } else {
- print STDOUT "$msg deleted.\n";
- }
- $self->{LIBS} = [$self->{potential_libs}];
- delete $self->{potential_libs};
+ my($msg)="'potential_libs' => '$self->{potential_libs}' should be";
+ if ($self->{potential_libs}){
+ print STDOUT "$msg changed to:\n\t'LIBS' => ['$self->{potential_libs}']\n";
+ } else {
+ print STDOUT "$msg deleted.\n";
+ }
+ $self->{LIBS} = [$self->{potential_libs}];
+ delete $self->{potential_libs};
}
# catch old-style 'ARMAYBE' and inform user how to 'upgrade'
if (defined $self->{ARMAYBE}){
- my($armaybe) = $self->{ARMAYBE};
- print STDOUT "ARMAYBE => '$armaybe' should be changed to:\n",
- "\t'dynamic_lib' => {ARMAYBE => '$armaybe'}\n";
- my(%dl) = %{$self->{dynamic_lib} || {}};
- $self->{dynamic_lib} = { %dl, ARMAYBE => $armaybe};
- delete $self->{ARMAYBE};
+ my($armaybe) = $self->{ARMAYBE};
+ print STDOUT "ARMAYBE => '$armaybe' should be changed to:\n",
+ "\t'dynamic_lib' => {ARMAYBE => '$armaybe'}\n";
+ my(%dl) = %{$self->{dynamic_lib} || {}};
+ $self->{dynamic_lib} = { %dl, ARMAYBE => $armaybe};
+ delete $self->{ARMAYBE};
}
if (defined $self->{LDTARGET}){
- print STDOUT "LDTARGET should be changed to LDFROM\n";
- $self->{LDFROM} = $self->{LDTARGET};
- delete $self->{LDTARGET};
+ print STDOUT "LDTARGET should be changed to LDFROM\n";
+ $self->{LDFROM} = $self->{LDTARGET};
+ delete $self->{LDTARGET};
}
# Turn a DIR argument on the command line into an array
if (defined $self->{DIR} && ref \$self->{DIR} eq 'SCALAR') {
- # So they can choose from the command line, which extensions they want
- # the grep enables them to have some colons too much in case they
- # have to build a list with the shell
- $self->{DIR} = [grep $_, split ":", $self->{DIR}];
+ # So they can choose from the command line, which extensions they want
+ # the grep enables them to have some colons too much in case they
+ # have to build a list with the shell
+ $self->{DIR} = [grep $_, split ":", $self->{DIR}];
}
# Turn a INCLUDE_EXT argument on the command line into an array
if (defined $self->{INCLUDE_EXT} && ref \$self->{INCLUDE_EXT} eq 'SCALAR') {
- $self->{INCLUDE_EXT} = [grep $_, split '\s+', $self->{INCLUDE_EXT}];
+ $self->{INCLUDE_EXT} = [grep $_, split '\s+', $self->{INCLUDE_EXT}];
}
# Turn a EXCLUDE_EXT argument on the command line into an array
if (defined $self->{EXCLUDE_EXT} && ref \$self->{EXCLUDE_EXT} eq 'SCALAR') {
- $self->{EXCLUDE_EXT} = [grep $_, split '\s+', $self->{EXCLUDE_EXT}];
+ $self->{EXCLUDE_EXT} = [grep $_, split '\s+', $self->{EXCLUDE_EXT}];
}
foreach my $mmkey (sort keys %$self){
- print STDOUT " $mmkey => ", neatvalue($self->{$mmkey}), "\n" if $Verbose;
- print STDOUT "'$mmkey' is not a known MakeMaker parameter name.\n"
- unless exists $Recognized_Att_Keys{$mmkey};
+ next if $mmkey eq 'ARGS';
+ print STDOUT " $mmkey => ", neatvalue($self->{$mmkey}), "\n" if $Verbose;
+ print STDOUT "'$mmkey' is not a known MakeMaker parameter name.\n"
+ unless exists $Recognized_Att_Keys{$mmkey};
}
$| = 1 if $Verbose;
}
my($self) = @_;
# We allow extension-specific hints files.
- return unless -d "hints";
+ require File::Spec;
+ my $curdir = File::Spec->curdir;
+
+ my $hint_dir = File::Spec->catdir($curdir, "hints");
+ return unless -d $hint_dir;
# First we look for the best hintsfile we have
my($hint)="${^O}_$Config{osvers}";
# Also try without trailing minor version numbers.
while (1) {
- last if -f "hints/$hint.pl"; # found
+ last if -f File::Spec->catfile($hint_dir, "$hint.pl"); # found
} continue {
- last unless $hint =~ s/_[^_]*$//; # nothing to cut off
+ last unless $hint =~ s/_[^_]*$//; # nothing to cut off
}
- my $hint_file = "hints/$hint.pl";
+ my $hint_file = File::Spec->catfile($hint_dir, "$hint.pl");
return unless -f $hint_file; # really there
- # execute the hintsfile:
+ _run_hintfile($self, $hint_file);
+}
+
+sub _run_hintfile {
+ no strict 'vars';
+ local($self) = shift; # make $self available to the hint file.
+ my($hint_file) = shift;
+
+ local($@, $!);
print STDERR "Processing hints file $hint_file\n";
- {
- local *HINT;
- open(HINT, $hint_file) || die "Can't open $hint_file: $!";
- eval join '', <HINT>;
- close HINT;
+
+ # Just in case the ./ isn't on the hint file, which File::Spec can
+ # often strip off, we bung the curdir into @INC
+ local @INC = (File::Spec->curdir, @INC);
+ my $ret = do $hint_file;
+ if( !defined $ret ) {
+ my $error = $@ || $!;
+ print STDERR $error;
}
- print STDERR $@ if $@;
}
sub mv_all_methods {
# still trying to reduce the list to some reasonable minimum --
# because I want to make it easier for the user. A.K.
+ local $SIG{__WARN__} = sub {
+ # can't use 'no warnings redefined', 5.6 only
+ warn @_ unless $_[0] =~ /^Subroutine .* redefined/
+ };
foreach my $method (@Overridable) {
- # We cannot say "next" here. Nick might call MY->makeaperl
- # which isn't defined right now
+ # We cannot say "next" here. Nick might call MY->makeaperl
+ # which isn't defined right now
+
+ # Above statement was written at 4.23 time when Tk-b8 was
+ # around. As Tk-b9 only builds with 5.002something and MM 5 is
+ # standard, we try to enable the next line again. It was
+ # commented out until MM 5.23
+
+ next unless defined &{"${from}::$method"};
- # Above statement was written at 4.23 time when Tk-b8 was
- # around. As Tk-b9 only builds with 5.002something and MM 5 is
- # standard, we try to enable the next line again. It was
- # commented out until MM 5.23
+ *{"${to}::$method"} = \&{"${from}::$method"};
- next unless defined &{"${from}::$method"};
+ # delete would do, if we were sure, nobody ever called
+ # MY->makeaperl directly
- *{"${to}::$method"} = \&{"${from}::$method"};
+ # delete $symtab->{$method};
- # delete would do, if we were sure, nobody ever called
- # MY->makeaperl directly
-
- # delete $symtab->{$method};
-
- # If we delete a method, then it will be undefined and cannot
- # be called. But as long as we have Makefile.PLs that rely on
- # %MY:: being intact, we have to fill the hole with an
- # inheriting method:
+ # If we delete a method, then it will be undefined and cannot
+ # be called. But as long as we have Makefile.PLs that rely on
+ # %MY:: being intact, we have to fill the hole with an
+ # inheriting method:
- eval "package MY; sub $method { shift->SUPER::$method(\@_); }";
+ eval "package MY; sub $method { shift->SUPER::$method(\@_); }";
}
# We have to clean out %INC also, because the current directory is
# my $inc;
# foreach $inc (keys %INC) {
-# #warn "***$inc*** deleted";
-# delete $INC{$inc};
+# #warn "***$inc*** deleted";
+# delete $INC{$inc};
# }
}
my($self) = shift;
my($section) = @_;
if ($section eq 'dynamic') {
- print STDOUT "Warning (non-fatal): Target 'dynamic' depends on targets ",
- "in skipped section 'dynamic_bs'\n"
+ print STDOUT "Warning (non-fatal): Target 'dynamic' depends on targets ",
+ "in skipped section 'dynamic_bs'\n"
if $self->{SKIPHASH}{dynamic_bs} && $Verbose;
print STDOUT "Warning (non-fatal): Target 'dynamic' depends on targets ",
- "in skipped section 'dynamic_lib'\n"
+ "in skipped section 'dynamic_lib'\n"
if $self->{SKIPHASH}{dynamic_lib} && $Verbose;
}
if ($section eq 'dynamic_lib') {
print STDOUT "Warning (non-fatal): Target '\$(INST_DYNAMIC)' depends on ",
- "targets in skipped section 'dynamic_bs'\n"
+ "targets in skipped section 'dynamic_bs'\n"
if $self->{SKIPHASH}{dynamic_bs} && $Verbose;
}
if ($section eq 'static') {
print STDOUT "Warning (non-fatal): Target 'static' depends on targets ",
- "in skipped section 'static_lib'\n"
+ "in skipped section 'static_lib'\n"
if $self->{SKIPHASH}{static_lib} && $Verbose;
}
return 'skipped' if $self->{SKIPHASH}{$section};
sub flush {
my $self = shift;
my($chunk);
-# use FileHandle ();
-# my $fh = new FileHandle;
local *FH;
print STDOUT "Writing $self->{MAKEFILE} for $self->{NAME}\n";
unlink($self->{MAKEFILE}, "MakeMaker.tmp", $Is_VMS ? 'Descrip.MMS' : '');
-# $fh->open(">MakeMaker.tmp") or die "Unable to open MakeMaker.tmp: $!";
open(FH,">MakeMaker.tmp") or die "Unable to open MakeMaker.tmp: $!";
for $chunk (@{$self->{RESULT}}) {
-# print $fh "$chunk\n";
- print FH "$chunk\n";
+ print FH "$chunk\n";
}
-# $fh->close;
close FH;
my($finalname) = $self->{MAKEFILE};
- rename("MakeMaker.tmp", $finalname);
+ _rename("MakeMaker.tmp", $finalname) or
+ warn "rename MakeMaker.tmp => $finalname: $!";
chmod 0644, $finalname unless $Is_VMS;
- if ($self->{PARENT}) {
- foreach (keys %$self) { # safe memory
- delete $self->{$_} unless $Keep_after_flush{$_};
- }
+ my %keep = map { ($_ => 1) } qw(NEEDS_LINKING HAS_LINK_CODE);
+
+ if ($self->{PARENT} && !$self->{_KEEP_AFTER_FLUSH}) {
+ foreach (keys %$self) { # safe memory
+ delete $self->{$_} unless $keep{$_};
+ }
}
system("$Config::Config{eunicefix} $finalname") unless $Config::Config{eunicefix} eq ":";
}
+
+# This is a rename for OS's where the target must be unlinked first.
+sub _rename {
+ my($src, $dest) = @_;
+ chmod 0666, $dest;
+ unlink $dest;
+ return rename $src, $dest;
+}
+
+# This is an unlink for OS's where the target must be writable first.
+sub _unlink {
+ my @files = @_;
+ chmod 0666, @files;
+ return unlink @files;
+}
+
+
# The following mkbootstrap() is only for installations that are calling
# the pre-4.1 mkbootstrap() from their old Makefiles. This MakeMaker
# writes Makefiles, that use ExtUtils::Mkbootstrap directly.
my($t) = ref $v;
return "q[$v]" unless $t;
if ($t eq 'ARRAY') {
- my(@m, @neat);
- push @m, "[";
- foreach my $elem (@$v) {
- push @neat, "q[$elem]";
- }
- push @m, join ", ", @neat;
- push @m, "]";
- return join "", @m;
+ my(@m, @neat);
+ push @m, "[";
+ foreach my $elem (@$v) {
+ push @neat, "q[$elem]";
+ }
+ push @m, join ", ", @neat;
+ push @m, "]";
+ return join "", @m;
}
return "$v" unless $t eq 'HASH';
my(@m, $key, $val);
while (($key,$val) = each %$v){
- last unless defined $key; # cautious programming in case (undef,undef) is true
- push(@m,"$key=>".neatvalue($val)) ;
+ last unless defined $key; # cautious programming in case (undef,undef) is true
+ push(@m,"$key=>".neatvalue($val)) ;
}
return "{ ".join(', ',@m)." }";
}
my($self) = @_;
my(@m);
if ($Verbose){
- push @m, "\n# Full list of MakeMaker attribute values:";
- foreach my $key (sort keys %$self){
- next if $key eq 'RESULT' || $key =~ /^[A-Z][a-z]/;
- my($v) = neatvalue($self->{$key});
- $v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/;
- $v =~ tr/\n/ /s;
- push @m, "# $key => $v";
- }
+ push @m, "\n# Full list of MakeMaker attribute values:";
+ foreach my $key (sort keys %$self){
+ next if $key eq 'RESULT' || $key =~ /^[A-Z][a-z]/;
+ my($v) = neatvalue($self->{$key});
+ $v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/;
+ $v =~ tr/\n/ /s;
+ push @m, "# $key => $v";
+ }
}
join "\n", @m;
}
-package ExtUtils::MakeMaker;
1;
__END__
=head1 NAME
-ExtUtils::MakeMaker - create an extension Makefile
+ExtUtils::MakeMaker - Create a module Makefile
=head1 SYNOPSIS
-C<use ExtUtils::MakeMaker;>
-
-C<WriteMakefile( ATTRIBUTE =E<gt> VALUE [, ...] );>
+ use ExtUtils::MakeMaker;
-which is really
-
-C<MM-E<gt>new(\%att)-E<gt>flush;>
+ WriteMakefile( ATTRIBUTE => VALUE [, ...] );
=head1 DESCRIPTION
it wishes to have written to the Makefile.
MakeMaker is object oriented. Each directory below the current
-directory that contains a Makefile.PL. Is treated as a separate
+directory that contains a Makefile.PL is treated as a separate
object. This makes it possible to write an unlimited number of
Makefiles with a single invocation of WriteMakefile().
=head2 How To Write A Makefile.PL
-The short answer is: Don't.
-
- Always begin with h2xs.
- Always begin with h2xs!
- ALWAYS BEGIN WITH H2XS!
-
-even if you're not building around a header file, and even if you
-don't have an XS component.
-
-Run h2xs(1) before you start thinking about writing a module. For so
-called pm-only modules that consist of C<*.pm> files only, h2xs has
-the C<-X> switch. This will generate dummy files of all kinds that are
-useful for the module developer.
-
-The medium answer is:
-
- use ExtUtils::MakeMaker;
- WriteMakefile( NAME => "Foo::Bar" );
+See ExtUtils::MakeMaker::Tutorial.
The long answer is the rest of the manpage :-)
The Makefile to be produced may be altered by adding arguments of the
form C<KEY=VALUE>. E.g.
- perl Makefile.PL PREFIX=/tmp/myperl5
+ perl Makefile.PL PREFIX=~
Other interesting targets in the generated Makefile are
=head2 make test
MakeMaker checks for the existence of a file named F<test.pl> in the
-current directory and if it exists it adds commands to the test target
-of the generated Makefile that will execute the script with the proper
-set of perl C<-I> options.
+current directory and if it exists it execute the script with the
+proper set of perl C<-I> options.
MakeMaker also checks for any files matching glob("t/*.t"). It will
-add commands to the test target of the generated Makefile that execute
-all matching files via the L<Test::Harness> module with the C<-I>
-switches set correctly.
+execute all matching files in alphabetical order via the
+L<Test::Harness> module with the C<-I> switches set correctly.
+
+If you'd like to see the raw output of your tests, set the
+C<TEST_VERBOSE> variable to true.
+
+ make test TEST_VERBOSE=1
=head2 make testdb
test under the Perl debugger (see L<perldebug>). If the file
F<test.pl> exists in the current directory, it is used for the test.
-If you want to debug some other testfile, set C<TEST_FILE> variable
+If you want to debug some other testfile, set the C<TEST_FILE> variable
thusly:
make testdb TEST_FILE=t/mytest.t
By default the debugger is called using C<-d> option to perl. If you
-want to specify some other option, set C<TESTDB_SW> variable:
+want to specify some other option, set the C<TESTDB_SW> variable:
make testdb TESTDB_SW=-Dx
=head2 make install
make alone puts all relevant files into directories that are named by
-the macros INST_LIB, INST_ARCHLIB, INST_SCRIPT, INST_HTMLLIBDIR,
-INST_HTMLSCRIPTDIR, INST_MAN1DIR, and INST_MAN3DIR. All these default
-to something below ./blib if you are I<not> building below the perl
-source directory. If you I<are> building below the perl source,
-INST_LIB and INST_ARCHLIB default to ../../lib, and INST_SCRIPT is not
-defined.
+the macros INST_LIB, INST_ARCHLIB, INST_SCRIPT, INST_MAN1DIR and
+INST_MAN3DIR. All these default to something below ./blib if you are
+I<not> building below the perl source directory. If you I<are>
+building below the perl source, INST_LIB and INST_ARCHLIB default to
+../../lib, and INST_SCRIPT is not defined.
The I<install> target of the generated Makefile copies the files found
below each of the INST_* directories to their INSTALL*
counterparts. Which counterparts are chosen depends on the setting of
INSTALLDIRS according to the following table:
- INSTALLDIRS set to
- perl site
+ INSTALLDIRS set to
+ perl site vendor
- INST_ARCHLIB INSTALLARCHLIB INSTALLSITEARCH
- INST_LIB INSTALLPRIVLIB INSTALLSITELIB
- INST_HTMLLIBDIR INSTALLHTMLPRIVLIBDIR INSTALLHTMLSITELIBDIR
- INST_HTMLSCRIPTDIR INSTALLHTMLSCRIPTDIR
- INST_BIN INSTALLBIN
- INST_SCRIPT INSTALLSCRIPT
- INST_MAN1DIR INSTALLMAN1DIR
- INST_MAN3DIR INSTALLMAN3DIR
+ PERLPREFIX SITEPREFIX VENDORPREFIX
+ INST_ARCHLIB INSTALLARCHLIB INSTALLSITEARCH INSTALLVENDORARCH
+ INST_LIB INSTALLPRIVLIB INSTALLSITELIB INSTALLVENDORLIB
+ INST_BIN INSTALLBIN INSTALLSITEBIN INSTALLVENDORBIN
+ INST_SCRIPT INSTALLSCRIPT INSTALLSCRIPT INSTALLSCRIPT
+ INST_MAN1DIR INSTALLMAN1DIR INSTALLSITEMAN1DIR INSTALLVENDORMAN1DIR
+ INST_MAN3DIR INSTALLMAN3DIR INSTALLSITEMAN3DIR INSTALLVENDORMAN3DIR
The INSTALL... macros in turn default to their %Config
($Config{installprivlib}, $Config{installarchlib}, etc.) counterparts.
perl -le 'print join $/, @INC'
+Sometimes older versions of the module you're installing live in other
+directories in @INC. Because Perl loads the first version of a module it
+finds, not the newest, you might accidentally get one of these older
+versions even after installing a brand new version. To delete I<all other
+versions of the module you're installing> (not simply older ones) set the
+C<UNINST> variable.
+
+ make install UNINST=1
+
=head2 PREFIX and LIB attribute
go. The quickest way to install a module in a non-standard place might
be
- perl Makefile.PL LIB=~/lib
+ perl Makefile.PL PREFIX=~
-This will install the module's architecture-independent files into
-~/lib, the architecture-dependent files into ~/lib/$archname.
+This will install all files in the module under your home directory,
+with man pages and libraries going into an appropriate place (usually
+~/man and ~/lib).
Another way to specify many INSTALL directories with a single
-parameter is PREFIX.
+parameter is LIB.
- perl Makefile.PL PREFIX=~
+ perl Makefile.PL LIB=~/lib
-This will replace the string specified by C<$Config{prefix}> in all
-C<$Config{install*}> values.
+This will install the module's architecture-independent files into
+~/lib, the architecture-dependent files into ~/lib/$archname.
Note, that in both cases the tilde expansion is done by MakeMaker, not
by perl by default, nor by make.
-Conflicts between parameters LIB,
-PREFIX and the various INSTALL* arguments are resolved so that:
+Conflicts between parameters LIB, PREFIX and the various INSTALL*
+arguments are resolved so that:
=over 4
=back
-If the user has superuser privileges, and is not working on AFS
-or relatives, then the defaults for
-INSTALLPRIVLIB, INSTALLARCHLIB, INSTALLSCRIPT, etc. will be appropriate,
-and this incantation will be the best:
+If the user has superuser privileges, and is not working on AFS or
+relatives, then the defaults for INSTALLPRIVLIB, INSTALLARCHLIB,
+INSTALLSCRIPT, etc. will be appropriate, and this incantation will be
+the best:
- perl Makefile.PL; make; make test
+ perl Makefile.PL;
+ make;
+ make test
make install
make install per default writes some documentation of what has been
have to do this by calling
perl Makefile.PL INSTALLSITELIB=/afs/here/today \
- INSTALLSCRIPT=/afs/there/now INSTALLMAN3DIR=/afs/for/manpages
+ INSTALLSCRIPT=/afs/there/now INSTALLMAN3DIR=/afs/for/manpages
make
Be careful to repeat this procedure every time you recompile an
=head2 Using Attributes and Parameters
-The following attributes can be specified as arguments to WriteMakefile()
-or as NAME=VALUE pairs on the command line:
+The following attributes may be specified as arguments to WriteMakefile()
+or as NAME=VALUE pairs on the command line.
=over 2
full or relative path or URL to the binary archive for a particular
architecture. For example:
- perl Makefile.PL BINARY_LOCATION=x86/Agent.tar.gz
+ perl Makefile.PL BINARY_LOCATION=x86/Agent.tar.gz
builds a PPD package that references a binary of the C<Agent> package,
located in the C<x86> directory relative to the PPD itself.
Something like C<"-DHAVE_UNISTD_H">
+=item DESTDIR
+
+This is the root directory into which the code will be installed. It
+I<prepends itself to the normal prefix>. For example, if your code
+would normally go into F</usr/local/lib/perl> you could set DESTDIR=~/tmp/
+and installation would go into F<~/tmp/usr/local/lib/perl>.
+
+This is primarily of use for people who repackage Perl modules.
+
+NOTE: Due to the nature of make, it is important that you put the trailing
+slash on your DESTDIR. F<~/tmp/> not F<~/tmp>.
+
=item DIR
Ref to array of subdirectories containing Makefile.PLs e.g. [ 'sdbm'
=item DISTNAME
-Your name for distributing the package (by tar file). This defaults to
-NAME above.
+A safe filename for the package.
+
+Defaults to NAME above but with :: replaced with -.
+
+For example, Foo::Bar becomes Foo-Bar.
+
+=item DISTVNAME
+
+Your name for distributing the package with the version number
+included. This is used by 'make dist' to name the resulting archive
+file.
+
+Defaults to DISTNAME-VERSION.
+
+For example, version 1.04 of Foo::Bar becomes Foo-Bar-1.04.
+
+On some OS's where . has special meaning VERSION_SYM may be used in
+place of VERSION.
=item DL_FUNCS
INST_SCRIPT directory. Make realclean will delete them from there
again.
+If your executables start with something like #!perl or
+#!/usr/bin/perl MakeMaker will change this to the path of the perl
+'Makefile.PL' was invoked with so the programs will be sure to run
+properly even if perl is not in /usr/bin/perl.
+
=item FIRST_MAKEFILE
-The name of the Makefile to be produced. Defaults to the contents of
-MAKEFILE, but can be overridden. This is used for the second Makefile
-that will be produced for the MAP_TARGET.
+The name of the Makefile to be produced. This is used for the second
+Makefile that will be produced for the MAP_TARGET.
+
+Defaults to 'Makefile' or 'Descrip.MMS' on VMS.
+
+(Note: we couldn't use MAKEFILE because dmake uses this for something
+else).
=item FULLPERL
-Perl binary able to run this extension.
+Perl binary able to run this extension, load XS modules, etc...
+
+=item FULLPERLRUN
+
+Like PERLRUN, except it uses FULLPERL.
+
+=item FULLPERLRUNINST
+
+Like PERLRUNINST, except it uses FULLPERL.
=item FUNCLIST
Ref to array of *.h file names. Similar to C.
-=item HTMLLIBPODS
-
-Hashref of .pm and .pod files. MakeMaker will default this to all
- .pod and any .pm files that include POD directives. The files listed
-here will be converted to HTML format and installed as was requested
-at Configure time.
-
-=item HTMLSCRIPTPODS
-
-Hashref of pod-containing files. MakeMaker will default this to all
-EXE_FILES files that include POD directives. The files listed
-here will be converted to HTML format and installed as was requested
-at Configure time.
-
=item IMPORTS
This attribute is used to specify names to be imported into the
-extension. It is only used on OS/2 and Win32.
+extension. Takes a hash ref.
+
+It is only used on OS/2 and Win32.
=item INC
=item INSTALLBIN
-Directory to install binary files (e.g. tkperl) into.
+Directory to install binary files (e.g. tkperl) into if
+INSTALLDIRS=perl.
=item INSTALLDIRS
-Determines which of the two sets of installation directories to
-choose: installprivlib and installarchlib versus installsitelib and
-installsitearch. The first pair is chosen with INSTALLDIRS=perl, the
-second with INSTALLDIRS=site. Default is site.
-
-=item INSTALLHTMLPRIVLIBDIR
-
-This directory gets the HTML pages at 'make install' time. Defaults to
-$Config{installhtmlprivlibdir}.
-
-=item INSTALLHTMLSCRIPTDIR
-
-This directory gets the HTML pages at 'make install' time. Defaults to
-$Config{installhtmlscriptdir}.
-
-=item INSTALLHTMLSITELIBDIR
-
-This directory gets the HTML pages at 'make install' time. Defaults to
-$Config{installhtmlsitelibdir}.
-
+Determines which of the sets of installation directories to choose:
+perl, site or vendor. Defaults to site.
=item INSTALLMAN1DIR
-This directory gets the man pages at 'make install' time. Defaults to
-$Config{installman1dir}.
-
=item INSTALLMAN3DIR
-This directory gets the man pages at 'make install' time. Defaults to
-$Config{installman3dir}.
+These directories get the man pages at 'make install' time if
+INSTALLDIRS=perl. Defaults to $Config{installman*dir}.
+
+If set to 'none', no man pages will be installed.
=item INSTALLPRIVLIB
Used by 'make install', which copies files from INST_LIB to this
directory if INSTALLDIRS is set to perl.
+Defaults to $Config{installprivlib}.
+
=item INSTALLSCRIPT
Used by 'make install' which copies files from INST_SCRIPT to this
Used by 'make install', which copies files from INST_ARCHLIB to this
directory if INSTALLDIRS is set to site (default).
+=item INSTALLSITEBIN
+
+Used by 'make install', which copies files from INST_BIN to this
+directory if INSTALLDIRS is set to site (default).
+
=item INSTALLSITELIB
Used by 'make install', which copies files from INST_LIB to this
directory if INSTALLDIRS is set to site (default).
-=item INST_ARCHLIB
+=item INSTALLSITEMAN1DIR
-Same as INST_LIB for architecture dependent files.
+=item INSTALLSITEMAN3DIR
-=item INST_BIN
+These directories get the man pages at 'make install' time if
+INSTALLDIRS=site (default). Defaults to
+$(SITEPREFIX)/man/man$(MAN*EXT).
-Directory to put real binary files during 'make'. These will be copied
-to INSTALLBIN during 'make install'
+If set to 'none', no man pages will be installed.
-=item INST_EXE
+=item INSTALLVENDORARCH
-Old name for INST_SCRIPT. Deprecated. Please use INST_SCRIPT if you
-need to use it.
+Used by 'make install', which copies files from INST_ARCHLIB to this
+directory if INSTALLDIRS is set to vendor.
+
+=item INSTALLVENDORBIN
+
+Used by 'make install', which copies files from INST_BIN to this
+directory if INSTALLDIRS is set to vendor.
+
+=item INSTALLVENDORLIB
-=item INST_HTMLLIBDIR
+Used by 'make install', which copies files from INST_LIB to this
+directory if INSTALLDIRS is set to vendor.
+
+=item INSTALLVENDORMAN1DIR
-Directory to hold the man pages in HTML format at 'make' time
+=item INSTALLVENDORMAN3DIR
-=item INST_HTMLSCRIPTDIR
+These directories get the man pages at 'make install' time if
+INSTALLDIRS=vendor. Defaults to $(VENDORPREFIX)/man/man$(MAN*EXT).
-Directory to hold the man pages in HTML format at 'make' time
+If set to 'none', no man pages will be installed.
+
+=item INST_ARCHLIB
+
+Same as INST_LIB for architecture dependent files.
+
+=item INST_BIN
+
+Directory to put real binary files during 'make'. These will be copied
+to INSTALLBIN during 'make install'
=item INST_LIB
testing. make install will copy the files in INST_SCRIPT to
INSTALLSCRIPT.
+=item LD
+
+Program to be used to link libraries for dynamic loading.
+
+Defaults to $Config{ld}.
+
+=item LDDLFLAGS
+
+Any special flags that might need to be passed to ld to create a
+shared library suitable for dynamic loading. It is up to the makefile
+to use it. (See L<Config/lddlflags>)
+
+Defaults to $Config{lddlflags}.
+
=item LDFROM
-defaults to "$(OBJECT)" and is used in the ld command to specify
+Defaults to "$(OBJECT)" and is used in the ld command to specify
what files to link/load from (also see dynamic_lib below for how to
specify ld flags)
=item LIB
LIB should only be set at C<perl Makefile.PL> time but is allowed as a
-MakeMaker argument. It has the effect of
-setting both INSTALLPRIVLIB and INSTALLSITELIB to that value regardless any
-explicit setting of those arguments (or of PREFIX).
-INSTALLARCHLIB and INSTALLSITEARCH are set to the corresponding
-architecture subdirectory.
+MakeMaker argument. It has the effect of setting both INSTALLPRIVLIB
+and INSTALLSITELIB to that value regardless any explicit setting of
+those arguments (or of PREFIX). INSTALLARCHLIB and INSTALLSITEARCH
+are set to the corresponding architecture subdirectory.
=item LIBPERL_A
make a perl. This is handled automatically as a switch by
MakeMaker. The user normally does not need it.
-=item MAKEFILE
+=item MAKEFILE_OLD
-The name of the Makefile to be produced.
+When 'make clean' or similar is run, the $(FIRST_MAKEFILE) will be
+backed up at this location.
+
+Defaults to $(FIRST_MAKEFILE).old or $(FIRST_MAKEFILE)_old on VMS.
=item MAN1PODS
=item NOECHO
-Defaults to C<@>. By setting it to an empty string you can generate a
-Makefile that echos all commands. Mainly used in debugging MakeMaker
-itself.
+Command so make does not print the literal commands its running.
+
+By setting it to an empty string you can generate a Makefile that
+prints all commands. Mainly used in debugging MakeMaker itself.
+
+Defaults to C<@>.
=item NORECURS
Boolean. Attribute to inhibit descending into subdirectories.
+=item NO_META
+
+When true, suppresses the generation and addition to the MANIFEST of
+the META.yml module meta-data file during 'make distdir'.
+
+Defaults to false.
+
=item NO_VC
In general, any generated Makefile checks for the current version of
system resources, error detection, memory usage reporting, catchable failure
of memory allocations, etc.
+=item PERLPREFIX
+
+Directory under which core modules are to be installed.
+
+Defaults to $Config{installprefixexp} falling back to
+$Config{installprefix}, $Config{prefixexp} or $Config{prefix} should
+$Config{installprefixexp} not exist.
+
+Overridden by PREFIX.
+
=item PERLRUN
-Use this instead of $(PERL) or $(FULLPERL) when you wish to run perl.
-It will set up extra necessary flags for you.
-
+Use this instead of $(PERL) when you wish to run perl. It will set up
+extra necessary flags for you.
+
=item PERLRUNINST
-
-Use this instead of $(PERL) or $(FULLPERL) when you wish to run
-perl to work with modules. It will add things like -I$(INST_ARCH)
-and other necessary flags.
-
+
+Use this instead of $(PERL) when you wish to run perl to work with
+modules. It will add things like -I$(INST_ARCH) and other necessary
+flags so perl can see the modules you're about to install.
+
=item PERL_SRC
Directory containing the Perl source code (use of this should be
=item PL_FILES
-Ref to hash of files to be processed as perl programs. MakeMaker
-will default to any found *.PL file (except Makefile.PL) being keys
-and the basename of the file being the value. E.g.
+MakeMaker can run programs to generate files for you at build time.
+By default any file named *.PL (except Makefile.PL and Build.PL) in
+the top level directory will be assumed to be a Perl program and run
+passing its own basename in as an argument. For example...
- {'foobar.PL' => 'foobar'}
+ perl foo.PL foo
-The *.PL files are expected to produce output to the target files
-themselves. If multiple files can be generated from the same *.PL
-file then the value in the hash can be a reference to an array of
-target file names. E.g.
+This behavior can be overridden by supplying your own set of files to
+search. PL_FILES accepts a hash ref, the key being the file to run
+and the value is passed in as the first argument when the PL file is run.
+
+ PL_FILES => {'bin/foobar.PL' => 'bin/foobar'}
+
+Would run bin/foobar.PL like this:
+
+ perl bin/foobar.PL bin/foobar
+
+If multiple files from one program are desired an array ref can be used.
+
+ PL_FILES => {'bin/foobar.PL' => [qw(bin/foobar1 bin/foobar2)]}
+
+In this case the program will be run multiple times using each target file.
+
+ perl bin/foobar.PL bin/foobar1
+ perl bin/foobar.PL bin/foobar2
- {'foobar.PL' => ['foobar1','foobar2']}
=item PM
=item PREFIX
-Can be used to set the three INSTALL* attributes in one go (except for
-probably INSTALLMAN1DIR, if it is not below PREFIX according to
-%Config). They will have PREFIX as a common directory node and will
-branch from that node into lib/, lib/ARCHNAME or whatever Configure
-decided at the build time of your perl (unless you override one of
-them, of course).
+This overrides all the default install locations. Man pages,
+libraries, scripts, etc... MakeMaker will try to make an educated
+guess about where to place things under the new PREFIX based on your
+Config defaults. Failing that, it will fall back to a structure
+which should be sensible for your platform.
-=item PREREQ_PM
-
-Hashref: Names of modules that need to be available to run this
-extension (e.g. Fcntl for SDBM_File) are the keys of the hash and the
-desired version is the value. If the required version number is 0, we
-only check if any version is installed already.
+If you specify LIB or any INSTALL* variables they will not be effected
+by the PREFIX.
=item PREREQ_FATAL
It is I<extremely> rare to have to use C<PREREQ_FATAL> at all!
+=item PREREQ_PM
+
+Hashref: Names of modules that need to be available to run this
+extension (e.g. Fcntl for SDBM_File) are the keys of the hash and the
+desired version is the value. If the required version number is 0, we
+only check if any version is installed already.
+
=item PREREQ_PRINT
Bool. If this parameter is true, the prerequisites will be printed to
-stdout and MakeMaker will exit. The output format is
+stdout and MakeMaker will exit. The output format is an evalable hash
+ref.
$PREREQ_PM = {
'A::B' => Vers1,
perl(A::B)>=Vers1 perl(C::D)>=Vers2 ...
+=item SITEPREFIX
+
+Like PERLPREFIX, but only for the site install locations.
+
+Defaults to $Config{siteprefixexp}. Perls prior to 5.6.0 didn't have
+an explicit siteprefix in the Config. In those cases
+$Config{installprefix} will be used.
+
+Overridable by PREFIX
+
+=item SIGN
+
+When true, perform the generation and addition to the MANIFEST of the
+SIGNATURE file in the distdir during 'make distdir', via 'cpansign
+-s'.
+
+Note that you need to install the Module::Signature module to
+perform this operation.
+
+Defaults to false.
+
=item SKIP
Arrayref. E.g. [qw(name1 name2)] skip (do not write) sections of the
speedup. It may seriously damage the resulting Makefile. Only use it
if you really need it.
-=item TEST_LIBS
-
-The set of -I's necessary to run a "make test". Use as:
-$(PERL) $(TEST_LIBS) -e '...' for example.
-
=item TYPEMAPS
Ref to array of typemap file names. Use this when the typemaps are
precedence, even if it isn't listed in TYPEMAPS. The default system
typemap has lowest precedence.
+=item VENDORPREFIX
+
+Like PERLPREFIX, but only for the vendor install locations.
+
+Defaults to $Config{vendorprefixexp}.
+
+Overridable by PREFIX
+
+=item VERBINST
+
+If true, make install will be verbose
+
=item VERSION
Your version number for distributing the package. This defaults to
$VERSION = '1.00';
*VERSION = \'1.01';
- ( $VERSION ) = '$Revision: 1.4 $ ' =~ /\$Revision:\s+([^\s]+)/;
+ $VERSION = sprintf "%d.%03d", q$Revision: 4409 $ =~ /(\d+)/g;
$FOO::VERSION = '1.10';
*FOO::VERSION = \'1.11';
- our $VERSION = 1.2.3; # new for perl5.6.0
+ our $VERSION = 1.2.3; # new for perl5.6.0
but these will fail:
See attribute C<depend> below.
+=item VERSION_SYM
+
+A sanitized VERSION with . replaced by _. For places where . has
+special meaning (some filesystems, RCS labels, etc...)
+
=item XS
Hashref of .xs files. MakeMaker will default this. e.g.
=head2 Additional lowercase attributes
can be used to pass parameters to the methods which implement that
-part of the Makefile.
+part of the Makefile. Parameters are specified as a hash ref but are
+passed to the method as a hash.
=over 2
{ANY_MACRO => ANY_VALUE, ...}
+=item postamble
+
+Anything put here will be passed to MY::postamble() if you have one.
+
=item realclean
{FILES => '$(INST_ARCHAUTODIR)/*.xyz'}
If you cannot achieve the desired Makefile behaviour by specifying
attributes you may define private subroutines in the Makefile.PL.
-Each subroutines returns the text it wishes to have written to
+Each subroutine returns the text it wishes to have written to
the Makefile. To override a section of the Makefile you can
either say:
- sub MY::c_o { "new literal text" }
+ sub MY::c_o { "new literal text" }
or you can edit the default by saying something like:
- sub MY::c_o {
- package MY; # so that "SUPER" works right
- my $inherited = shift->SUPER::c_o(@_);
- $inherited =~ s/old text/new text/;
- $inherited;
- }
+ package MY; # so that "SUPER" works right
+ sub c_o {
+ my $inherited = shift->SUPER::c_o(@_);
+ $inherited =~ s/old text/new text/;
+ $inherited;
+ }
If you are running experiments with embedding perl as a library into
other applications, you might find MakeMaker is not sufficient. You'd
If you still need a different solution, try to develop another
subroutine that fits your needs and submit the diffs to
-F<perl5-porters@perl.org> or F<comp.lang.perl.moderated> as appropriate.
+C<makemaker@perl.org>
-For a complete description of all MakeMaker methods see L<ExtUtils::MM_Unix>.
+For a complete description of all MakeMaker methods see
+L<ExtUtils::MM_Unix>.
Here is a simple example of how to add a new target to the generated
Makefile:
sub MY::postamble {
- '
+ return <<'MAKE_FRAG';
$(MYEXTLIB): sdbm/Makefile
- cd sdbm && $(MAKE) all
- ';
+ cd sdbm && $(MAKE) all
+
+ MAKE_FRAG
}
+=head2 The End Of Cargo Cult Programming
+
+WriteMakefile() now does some basic sanity checks on its parameters to
+protect against typos and malformatted values. This means some things
+which happened to work in the past will now throw warnings and
+possibly produce internal errors.
+
+Some of the most common mistakes:
+
+=over 2
+
+=item C<< MAN3PODS => ' ' >>
+
+This is commonly used to supress the creation of man pages. MAN3PODS
+takes a hash ref not a string, but the above worked by accident in old
+versions of MakeMaker.
+
+The correct code is C<< MAN3PODS => { } >>.
+
+=back
+
=head2 Hintsfile support
directory with the name C<$(DISTNAME)-$(VERSION)>. If that directory
exists, it will be removed first.
-=item make disttest
+Additionally, it will create a META.yml module meta-data file in the
+distdir and add this to the distdir's MANFIEST. You can shut this
+behavior off with the NO_META flag.
+
+=item make disttest
Makes a distdir first, and runs a C<perl Makefile.PL>, a make, and
a make test in that directory.
WriteMakefile( 'dist' => { COMPRESS=>"bzip2", SUFFIX=>".bz2" })
+
+=head2 Module Meta-Data
+
+Long plaguing users of MakeMaker based modules has been the problem of
+getting basic information about the module out of the sources
+I<without> running the F<Makefile.PL> and doing a bunch of messy
+heuristics on the resulting F<Makefile>. To this end a simple module
+meta-data file has been introduced, F<META.yml>.
+
+F<META.yml> is a YAML document (see http://www.yaml.org) containing
+basic information about the module (name, version, prerequisites...)
+in an easy to read format. The format is developed and defined by the
+Module::Build developers (see
+http://module-build.sourceforge.net/META-spec.html)
+
+MakeMaker will automatically generate a F<META.yml> file for you and
+add it to your F<MANIFEST> as part of the 'distdir' target (and thus
+the 'dist' target). This is intended to seamlessly and rapidly
+populate CPAN with module meta-data. If you wish to shut this feature
+off, set the C<NO_META> C<WriteMakefile()> flag to true.
+
+
=head2 Disabling an extension
If some events detected in F<Makefile.PL> imply that there is no way
dependency in a CPAN::Bundle, but the functionality is supported by
different means on the current architecture).
+=head2 Other Handy Functions
+
+=over 4
+
+=item prompt
+
+ my $value = prompt($message);
+ my $value = prompt($message, $default);
+
+The C<prompt()> function provides an easy way to request user input
+used to write a makefile. It displays the $message as a prompt for
+input. If a $default is provided it will be used as a default. The
+function returns the $value selected by the user.
+
+If C<prompt()> detects that it is not running interactively and there
+is nothing on STDIN or if the PERL_MM_USE_DEFAULT environment variable
+is set to true, the $default will be used without prompting. This
+prevents automated processes from blocking on user input.
+
+If no $default is provided an empty string will be used instead.
+
+=back
+
+
=head1 ENVIRONMENT
-=over 8
+=over 4
=item PERL_MM_OPT
=head1 SEE ALSO
-ExtUtils::MM_Unix, ExtUtils::Manifest, ExtUtils::testlib,
-ExtUtils::Install, ExtUtils::Embed
+ExtUtils::MM_Unix, ExtUtils::Manifest ExtUtils::Install,
+ExtUtils::Embed
=head1 AUTHORS
-Andy Dougherty <F<doughera@lafcol.lafayette.edu>>, Andreas KE<ouml>nig
-<F<andreas.koenig@mind.de>>, Tim Bunce <F<Tim.Bunce@ig.co.uk>>. VMS
-support by Charles Bailey <F<bailey@newman.upenn.edu>>. OS/2 support
-by Ilya Zakharevich <F<ilya@math.ohio-state.edu>>.
+Andy Dougherty C<doughera@lafayette.edu>, Andreas KE<ouml>nig
+C<andreas.koenig@mind.de>, Tim Bunce C<timb@cpan.org>. VMS
+support by Charles Bailey C<bailey@newman.upenn.edu>. OS/2 support
+by Ilya Zakharevich C<ilya@math.ohio-state.edu>.
+
+Currently maintained by Michael G Schwern C<schwern@pobox.com>
+
+Send patches and ideas to C<makemaker@perl.org>.
+
+Send bug reports via http://rt.cpan.org/. Please send your
+generated Makefile along with your report.
+
+For more up-to-date information, see L<http://www.makemaker.org>.
+
+=head1 LICENSE
+
+This program is free software; you can redistribute it and/or
+modify it under the same terms as Perl itself.
-Contact the MakeMaker mailing list <F<makemaker@perl.org>> if you have
-any questions.
+See L<http://www.perl.com/perl/misc/Artistic.html>
-Send patches and bug reports to <F<perlbug@perl.org>>.
=cut
https://perl5.git.perl.org / perl5.git / blobdiff