# Additional info from Nigel Head <nhead@ESOC.bitnet>
# and Kenneth Albanowski <kjahds@kjahds.com>
#
-# Consolidated by Andy Dougherty <doughera@lafcol.lafayette.edu>
+# Consolidated by Andy Dougherty <doughera@lafayette.edu>
#
# Updated Thu Feb 8 11:56:10 EST 1996
-# Updated Thu May 30 10:50:22 EDT 1996 by <doughera@lafcol.lafayette.edu>
+# Updated Thu May 30 10:50:22 EDT 1996 by <doughera@lafayette.edu>
# Updated Fri Jun 21 11:07:54 EDT 1996
# NDBM support for ELF renabled by <kjahds@kjahds.com>
# No version of Linux supports setuid scripts.
d_suidsafe='undef'
-# perl goes into the /usr tree. See the Filesystem Standard
-# available via anonymous FTP at tsx-11.mit.edu in
-# /pub/linux/docs/linux-standards/fsstnd.
-# Allow a command line override, e.g. Configure -Dprefix=/foo/bar
-case "$prefix" in
-'') prefix='/usr' ;;
-esac
-
-# gcc-2.6.3 defines _G_HAVE_BOOL to 1, but doesn't actually supply bool.
-ccflags="-Dbool=char -DHAS_BOOL $ccflags"
+# Debian and Red Hat, and perhaps other vendors, provide both runtime and
+# development packages for some libraries. The runtime packages contain shared
+# libraries with version information in their names (e.g., libgdbm.so.1.7.3);
+# the development packages supplement this with versionless shared libraries
+# (e.g., libgdbm.so).
+#
+# If you want to link against such a library, you must install the development
+# version of the package.
+#
+# These packages use a -dev naming convention in both Debian and Red Hat:
+# libgdbmg1 (non-development version of GNU libc 2-linked GDBM library)
+# libgdbmg1-dev (development version of GNU libc 2-linked GDBM library)
+# So make sure that for any libraries you wish to link Perl with under
+# Debian or Red Hat you have the -dev packages installed.
+#
+# Some operating systems (e.g., Solaris 2.6) will link to a versioned shared
+# library implicitly. For example, on Solaris, `ld foo.o -lgdbm' will find an
+# appropriate version of libgdbm, if one is available; Linux, however, doesn't
+# do the implicit mapping.
+ignore_versioned_solibs='y'
# BSD compatability library no longer needed
-set `echo X "$libswanted "| sed -e 's/ bsd / /'`
+# 'kaffe' has a /usr/lib/libnet.so which is not at all relevent for perl.
+set `echo X "$libswanted "| sed -e 's/ bsd / /' -e 's/ net / /'`
shift
libswanted="$*"
+# If you have glibc, then report the version for ./myconfig bug reporting.
+# (Configure doesn't need to know the specific version since it just uses
+# gcc to load the library for all tests.)
+# We don't use __GLIBC__ and __GLIBC_MINOR__ because they
+# are insufficiently precise to distinguish things like
+# libc-2.0.6 and libc-2.0.7.
+if test -L /lib/libc.so.6; then
+ libc=`ls -l /lib/libc.so.6 | awk '{print $NF}'`
+ libc=/lib/$libc
+fi
+
# Configure may fail to find lstat() since it's a static/inline
# function in <sys/stat.h>.
d_lstat=define
-# Explanation?
+# malloc wrap works
+case "$usemallocwrap" in
+'') usemallocwrap='define' ;;
+esac
+
+# The system malloc() is about as fast and as frugal as perl's.
+# Since the system malloc() has been the default since at least
+# 5.001, we might as well leave it that way. --AD 10 Jan 2002
case "$usemymalloc" in
'') usemymalloc='n' ;;
esac
+# Check if we're about to use Intel's ICC compiler
+case "`${cc:-cc} -V 2>&1`" in
+*"Intel(R) C++ Compiler"*)
+ # This is needed for Configure's prototype checks to work correctly
+ ccflags="-we147 $ccflags"
+ # If we're using ICC, we usually want the best performance
+ case "$optimize" in
+ '') optimize='-O3' ;;
+ esac
+ ;;
+esac
+
case "$optimize" in
-'') optimize='-O2' ;;
+# use -O2 by default ; -O3 doesn't seem to bring significant benefits with gcc
+'')
+ optimize='-O2'
+ case "`uname -m`" in
+ ppc*)
+ # on ppc, it seems that gcc (at least gcc 3.3.2) isn't happy
+ # with -O2 ; so downgrade to -O1.
+ optimize='-O1'
+ ;;
+ esac
+ ;;
esac
# Are we using ELF? Thanks to Kenneth Albanowski <kjahds@kjahds.com>
exit(0); /* succeed (yes, it's ELF) */
}
EOM
-if ${cc:-gcc} try.c >/dev/null 2>&1 && ./a.out; then
+if ${cc:-gcc} try.c >/dev/null 2>&1 && $run ./a.out; then
cat <<'EOM' >&4
You appear to have ELF support. I'll try to use it for dynamic loading.
If dynamic loading doesn't work, read hints/linux.sh for further information.
EOM
-#For RedHat Linux 3.0.3, you may need to fetch
-# ftp://ftp.redhat.com/pub/redhat-3.0.3/i386/updates/RPMS/ld.so-1.7.14-3.i386.rpm
-#
-
else
cat <<'EOM' >&4
#so='none'
# In addition, on some systems there is a problem with perl and NDBM
- # which causes AnyDBM and NDBM_File to lock up. This is evidenced
- # in the tests as AnyDBM just freezing. Apparently, this only
+ # which causes AnyDBM and NDBM_File to lock up. This is evidenced
+ # in the tests as AnyDBM just freezing. Apparently, this only
# happens on a.out systems, so we disable NDBM for all a.out linux
# systems. If someone can suggest a more robust test
# that would be appreciated.
# just as advertised. Checking into it, I found that the lockup was
# during the call to dbm_open. Not *in* dbm_open -- but between the call
# to and the jump into.
- #
+ #
# To make a long story short, making sure that the *.a and *.sa pairs of
# /usr/lib/lib{m,db,gdbm}.{a,sa}
# were perfectly in sync took care of it.
rm -f try.c a.out
-if /bin/bash -c exit; then
+if /bin/sh -c exit; then
echo ''
echo 'You appear to have a working bash. Good.'
else
# For this reason I suggest using the much bug-fixed tcsh for globbing
# where available.
-if [ ! "`csh -c 'echo $version' 2>/dev/null`" ]
-then
- echo 'Real csh found (might break); looking for tcsh ...'
- # Use ../UU/loc to find tcsh. (We run in the hints/ directory.)
- if xxx=`../UU/loc tcsh blurfl $pth`; $test -f "$xxx"; then
+# November 2001: That warning's pretty old now and probably not so
+# relevant, especially since perl now uses File::Glob for globbing.
+# We'll still look for tcsh, but tone down the warnings.
+# Andy Dougherty, Nov. 6, 2001
+if $csh -c 'echo $version' >/dev/null 2>&1; then
+ echo 'Your csh is really tcsh. Good.'
+else
+ if xxx=`./UU/loc tcsh blurfl $pth`; $test -f "$xxx"; then
echo "Found tcsh. I'll use it for globbing."
# We can't change Configure's setting of $csh, due to the way
# Configure handles $d_portable and commands found in $loclist.
# We can set the value for CSH in config.h by setting full_csh.
full_csh=$xxx
- else
- echo "Couldn't find tcsh. BEWARE: GLOBBING MIGHT BE BROKEN."
+ elif [ -f "$csh" ]; then
+ echo "Couldn't find tcsh. Csh-based globbing might be broken."
fi
-else
- echo 'Your csh is really tcsh. Good.'
fi
# Shimpei Yamashita <shimpei@socrates.patnet.caltech.edu>
# Message-Id: <33EF1634.B36B6500@pobox.com>
-#
-# MkLinux (osname=linux,archname=ppc-linux), which differs slightly from other
-# linuces, needs special flags passed in order for dynamic loading to work.
+#
+# The DR2 of MkLinux (osname=linux,archname=ppc-linux) may need
+# special flags passed in order for dynamic loading to work.
# instead of the recommended:
+#
# ccdlflags='-rdynamic'
-#
+#
# it should be:
# ccdlflags='-Wl,-E'
+#
+# So if your DR2 (DR3 came out summer 1998, consider upgrading)
+# has problems with dynamic loading, uncomment the
+# following three lines, make distclean, and re-Configure:
+#case "`uname -r | sed 's/^[0-9.-]*//'``arch`" in
+#'osfmach3ppc') ccdlflags='-Wl,-E' ;;
+#esac
-if [ "X$usethreads" != "X" ]; then
- ccflags="-D_REENTRANT -DUSE_THREADS $ccflags"
- cppflags="-D_REENTRANT -DUSE_THREADS $cppflags"
- # -lpthread needs to come before -lc but after other libraries such
- # as -lgdbm and such like. We assume here that -lc is present in
- # libswanted. If that fails to be true in future, then this can be
- # changed to add pthread to the very end of libswanted.
- set `echo X "$libswanted "| sed -e 's/ c / pthread c /'`
+case "`uname -m`" in
+sparc*)
+ case "$cccdlflags" in
+ *-fpic*) cccdlflags="`echo $cccdlflags|sed 's/-fpic/-fPIC/'`" ;;
+ *) cccdlflags="$cccdlflags -fPIC" ;;
+ esac
+ ;;
+esac
+
+# SuSE8.2 has /usr/lib/libndbm* which are ld scripts rather than
+# true libraries. The scripts cause binding against static
+# version of -lgdbm which is a bad idea. So if we have 'nm'
+# make sure it can read the file
+# NI-S 2003/08/07
+if [ -r /usr/lib/libndbm.so -a -x /usr/bin/nm ] ; then
+ if /usr/bin/nm /usr/lib/libndbm.so >/dev/null 2>&1 ; then
+ echo 'Your shared -lndbm seems to be a real library.'
+ else
+ echo 'Your shared -lndbm is not a real library.'
+ set `echo X "$libswanted "| sed -e 's/ ndbm / /'`
shift
libswanted="$*"
+ fi
fi
+
+
+# This script UU/usethreads.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to use threads.
+cat > UU/usethreads.cbu <<'EOCBU'
+case "$usethreads" in
+$define|true|[yY]*)
+ ccflags="-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS $ccflags"
+ set `echo X "$libswanted "| sed -e 's/ c / pthread c /'`
+ shift
+ libswanted="$*"
+
+ # Somehow at least in Debian 2.2 these manage to escape
+ # the #define forest of <features.h> and <time.h> so that
+ # the hasproto macro of Configure doesn't see these protos,
+ # even with the -D_GNU_SOURCE.
+
+ d_asctime_r_proto="$define"
+ d_crypt_r_proto="$define"
+ d_ctime_r_proto="$define"
+ d_gmtime_r_proto="$define"
+ d_localtime_r_proto="$define"
+ d_random_r_proto="$define"
+
+ ;;
+esac
+EOCBU
+
+cat > UU/uselargefiles.cbu <<'EOCBU'
+# This script UU/uselargefiles.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to use large files.
+case "$uselargefiles" in
+''|$define|true|[yY]*)
+# Keep this in the left margin.
+ccflags_uselargefiles="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
+
+ ccflags="$ccflags $ccflags_uselargefiles"
+ ;;
+esac
+EOCBU
https://perl5.git.perl.org / perl5.git / blobdiff