/* cop.h
*
- * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- * 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, by Larry Wall and others
+ * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+ * 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 by Larry Wall and others
*
* You may distribute under the terms of either the GNU General Public
* License or the Artistic License, as specified in the README file.
*
- * Control ops (cops) are one of the three ops OP_NEXTSTATE, OP_DBSTATE,
- * and OP_SETSTATE that (loosely speaking) are separate statements.
+ * Control ops (cops) are one of the two ops OP_NEXTSTATE and OP_DBSTATE,
+ * that (loosely speaking) are separate statements.
* They hold information important for lexical state and error reporting.
* At run time, PL_curcop is set to point to the most recently executed cop,
* and thus can be used to determine our current state.
*/
/* A jmpenv packages the state required to perform a proper non-local jump.
- * Note that there is a start_env initialized when perl starts, and top_env
- * points to this initially, so top_env should always be non-null.
+ * Note that there is a PL_start_env initialized when perl starts, and
+ * PL_top_env points to this initially, so PL_top_env should always be
+ * non-null.
*
- * Existence of a non-null top_env->je_prev implies it is valid to call
- * longjmp() at that runlevel (we make sure start_env.je_prev is always
+ * Existence of a non-null PL_top_env->je_prev implies it is valid to call
+ * longjmp() at that runlevel (we make sure PL_start_env.je_prev is always
* null to ensure this).
*
* je_mustcatch, when set at any runlevel to TRUE, means eval ops must
*
* The original patches that introduces flexible exceptions were:
*
- * http://public.activestate.com/cgi-bin/perlbrowse?patch=3386
- * http://public.activestate.com/cgi-bin/perlbrowse?patch=5162
+ * http://perl5.git.perl.org/perl.git/commit/312caa8e97f1c7ee342a9895c2f0e749625b4929
+ * http://perl5.git.perl.org/perl.git/commit/14dd3ad8c9bf82cf09798a22cc89a9862dfd6d1a
+ *
*/
#define dJMPENV JMPENV cur_env
#define JMPENV_PUSH(v) \
STMT_START { \
- DEBUG_l(Perl_deb(aTHX_ "Setting up jumplevel %p, was %p\n", \
- (void*)&cur_env, (void*)PL_top_env)); \
+ DEBUG_l({ \
+ int i = 0; JMPENV *p = PL_top_env; \
+ while (p) { i++; p = p->je_prev; } \
+ Perl_deb(aTHX_ "JUMPENV_PUSH level=%d at %s:%d\n", \
+ i, __FILE__, __LINE__);}) \
cur_env.je_prev = PL_top_env; \
OP_REG_TO_MEM; \
cur_env.je_ret = PerlProc_setjmp(cur_env.je_buf, SCOPE_SAVES_SIGNAL_MASK); \
#define JMPENV_POP \
STMT_START { \
- DEBUG_l(Perl_deb(aTHX_ "popping jumplevel was %p, now %p\n", \
- (void*)PL_top_env, (void*)cur_env.je_prev)); \
+ DEBUG_l({ \
+ int i = -1; JMPENV *p = PL_top_env; \
+ while (p) { i++; p = p->je_prev; } \
+ Perl_deb(aTHX_ "JUMPENV_POP level=%d at %s:%d\n", \
+ i, __FILE__, __LINE__);}) \
+ assert(PL_top_env == &cur_env); \
PL_top_env = cur_env.je_prev; \
} STMT_END
#define JMPENV_JUMP(v) \
STMT_START { \
+ DEBUG_l({ \
+ int i = -1; JMPENV *p = PL_top_env; \
+ while (p) { i++; p = p->je_prev; } \
+ Perl_deb(aTHX_ "JUMPENV_JUMP(%d) level=%d at %s:%d\n", \
+ (int)v, i, __FILE__, __LINE__);}) \
OP_REG_TO_MEM; \
if (PL_top_env->je_prev) \
PerlProc_longjmp(PL_top_env->je_buf, (v)); \
} STMT_END
#define CATCH_GET (PL_top_env->je_mustcatch)
-#define CATCH_SET(v) (PL_top_env->je_mustcatch = (v))
+#define CATCH_SET(v) \
+ STMT_START { \
+ DEBUG_l( \
+ Perl_deb(aTHX_ \
+ "JUMPLEVEL set catch %d => %d (for %p) at %s:%d\n", \
+ PL_top_env->je_mustcatch, v, (void*)PL_top_env, \
+ __FILE__, __LINE__);) \
+ PL_top_env->je_mustcatch = (v); \
+ } STMT_END
+
+/*
+=head1 COP Hint Hashes
+*/
+
+typedef struct refcounted_he COPHH;
+
+#define COPHH_KEY_UTF8 REFCOUNTED_HE_KEY_UTF8
+
+/*
+=for apidoc Amx|SV *|cophh_fetch_pvn|const COPHH *cophh|const char *keypv|STRLEN keylen|U32 hash|U32 flags
+
+Look up the entry in the cop hints hash I<cophh> with the key specified by
+I<keypv> and I<keylen>. If I<flags> has the C<COPHH_KEY_UTF8> bit set,
+the key octets are interpreted as UTF-8, otherwise they are interpreted
+as Latin-1. I<hash> is a precomputed hash of the key string, or zero if
+it has not been precomputed. Returns a mortal scalar copy of the value
+associated with the key, or C<&PL_sv_placeholder> if there is no value
+associated with the key.
+
+=cut
+*/
+
+#define cophh_fetch_pvn(cophh, keypv, keylen, hash, flags) \
+ Perl_refcounted_he_fetch_pvn(aTHX_ cophh, keypv, keylen, hash, flags)
+
+/*
+=for apidoc Amx|SV *|cophh_fetch_pvs|const COPHH *cophh|const char *key|U32 flags
+
+Like L</cophh_fetch_pvn>, but takes a literal string instead of a
+string/length pair, and no precomputed hash.
+
+=cut
+*/
+
+#define cophh_fetch_pvs(cophh, key, flags) \
+ Perl_refcounted_he_fetch_pvn(aTHX_ cophh, STR_WITH_LEN(key), 0, flags)
+
+/*
+=for apidoc Amx|SV *|cophh_fetch_pv|const COPHH *cophh|const char *key|U32 hash|U32 flags
+
+Like L</cophh_fetch_pvn>, but takes a nul-terminated string instead of
+a string/length pair.
+
+=cut
+*/
+
+#define cophh_fetch_pv(cophh, key, hash, flags) \
+ Perl_refcounted_he_fetch_pv(aTHX_ cophh, key, hash, flags)
+
+/*
+=for apidoc Amx|SV *|cophh_fetch_sv|const COPHH *cophh|SV *key|U32 hash|U32 flags
+
+Like L</cophh_fetch_pvn>, but takes a Perl scalar instead of a
+string/length pair.
+
+=cut
+*/
+
+#define cophh_fetch_sv(cophh, key, hash, flags) \
+ Perl_refcounted_he_fetch_sv(aTHX_ cophh, key, hash, flags)
+
+/*
+=for apidoc Amx|HV *|cophh_2hv|const COPHH *cophh|U32 flags
+
+Generates and returns a standard Perl hash representing the full set of
+key/value pairs in the cop hints hash I<cophh>. I<flags> is currently
+unused and must be zero.
+
+=cut
+*/
+
+#define cophh_2hv(cophh, flags) \
+ Perl_refcounted_he_chain_2hv(aTHX_ cophh, flags)
+
+/*
+=for apidoc Amx|COPHH *|cophh_copy|COPHH *cophh
+
+Make and return a complete copy of the cop hints hash I<cophh>.
+
+=cut
+*/
+
+#define cophh_copy(cophh) Perl_refcounted_he_inc(aTHX_ cophh)
+
+/*
+=for apidoc Amx|void|cophh_free|COPHH *cophh
+
+Discard the cop hints hash I<cophh>, freeing all resources associated
+with it.
+=cut
+*/
+
+#define cophh_free(cophh) Perl_refcounted_he_free(aTHX_ cophh)
+
+/*
+=for apidoc Amx|COPHH *|cophh_new_empty
+
+Generate and return a fresh cop hints hash containing no entries.
+
+=cut
+*/
+
+#define cophh_new_empty() ((COPHH *)NULL)
+
+/*
+=for apidoc Amx|COPHH *|cophh_store_pvn|COPHH *cophh|const char *keypv|STRLEN keylen|U32 hash|SV *value|U32 flags
+
+Stores a value, associated with a key, in the cop hints hash I<cophh>,
+and returns the modified hash. The returned hash pointer is in general
+not the same as the hash pointer that was passed in. The input hash is
+consumed by the function, and the pointer to it must not be subsequently
+used. Use L</cophh_copy> if you need both hashes.
+
+The key is specified by I<keypv> and I<keylen>. If I<flags> has the
+C<COPHH_KEY_UTF8> bit set, the key octets are interpreted as UTF-8,
+otherwise they are interpreted as Latin-1. I<hash> is a precomputed
+hash of the key string, or zero if it has not been precomputed.
+
+I<value> is the scalar value to store for this key. I<value> is copied
+by this function, which thus does not take ownership of any reference
+to it, and later changes to the scalar will not be reflected in the
+value visible in the cop hints hash. Complex types of scalar will not
+be stored with referential integrity, but will be coerced to strings.
+
+=cut
+*/
+
+#define cophh_store_pvn(cophh, keypv, keylen, hash, value, flags) \
+ Perl_refcounted_he_new_pvn(aTHX_ cophh, keypv, keylen, hash, value, flags)
+
+/*
+=for apidoc Amx|COPHH *|cophh_store_pvs|const COPHH *cophh|const char *key|SV *value|U32 flags
+
+Like L</cophh_store_pvn>, but takes a literal string instead of a
+string/length pair, and no precomputed hash.
+
+=cut
+*/
+
+#define cophh_store_pvs(cophh, key, value, flags) \
+ Perl_refcounted_he_new_pvn(aTHX_ cophh, STR_WITH_LEN(key), 0, value, flags)
+/*
+=for apidoc Amx|COPHH *|cophh_store_pv|const COPHH *cophh|const char *key|U32 hash|SV *value|U32 flags
+
+Like L</cophh_store_pvn>, but takes a nul-terminated string instead of
+a string/length pair.
+
+=cut
+*/
+
+#define cophh_store_pv(cophh, key, hash, value, flags) \
+ Perl_refcounted_he_new_pv(aTHX_ cophh, key, hash, value, flags)
+
+/*
+=for apidoc Amx|COPHH *|cophh_store_sv|const COPHH *cophh|SV *key|U32 hash|SV *value|U32 flags
+
+Like L</cophh_store_pvn>, but takes a Perl scalar instead of a
+string/length pair.
+
+=cut
+*/
+
+#define cophh_store_sv(cophh, key, hash, value, flags) \
+ Perl_refcounted_he_new_sv(aTHX_ cophh, key, hash, value, flags)
+
+/*
+=for apidoc Amx|COPHH *|cophh_delete_pvn|COPHH *cophh|const char *keypv|STRLEN keylen|U32 hash|U32 flags
+
+Delete a key and its associated value from the cop hints hash I<cophh>,
+and returns the modified hash. The returned hash pointer is in general
+not the same as the hash pointer that was passed in. The input hash is
+consumed by the function, and the pointer to it must not be subsequently
+used. Use L</cophh_copy> if you need both hashes.
+
+The key is specified by I<keypv> and I<keylen>. If I<flags> has the
+C<COPHH_KEY_UTF8> bit set, the key octets are interpreted as UTF-8,
+otherwise they are interpreted as Latin-1. I<hash> is a precomputed
+hash of the key string, or zero if it has not been precomputed.
+
+=cut
+*/
+
+#define cophh_delete_pvn(cophh, keypv, keylen, hash, flags) \
+ Perl_refcounted_he_new_pvn(aTHX_ cophh, keypv, keylen, hash, \
+ (SV *)NULL, flags)
+
+/*
+=for apidoc Amx|COPHH *|cophh_delete_pvs|const COPHH *cophh|const char *key|U32 flags
+
+Like L</cophh_delete_pvn>, but takes a literal string instead of a
+string/length pair, and no precomputed hash.
+
+=cut
+*/
+
+#define cophh_delete_pvs(cophh, key, flags) \
+ Perl_refcounted_he_new_pvn(aTHX_ cophh, STR_WITH_LEN(key), 0, \
+ (SV *)NULL, flags)
+
+/*
+=for apidoc Amx|COPHH *|cophh_delete_pv|const COPHH *cophh|const char *key|U32 hash|U32 flags
+
+Like L</cophh_delete_pvn>, but takes a nul-terminated string instead of
+a string/length pair.
+
+=cut
+*/
+
+#define cophh_delete_pv(cophh, key, hash, flags) \
+ Perl_refcounted_he_new_pv(aTHX_ cophh, key, hash, (SV *)NULL, flags)
+
+/*
+=for apidoc Amx|COPHH *|cophh_delete_sv|const COPHH *cophh|SV *key|U32 hash|U32 flags
+
+Like L</cophh_delete_pvn>, but takes a Perl scalar instead of a
+string/length pair.
+
+=cut
+*/
+
+#define cophh_delete_sv(cophh, key, hash, flags) \
+ Perl_refcounted_he_new_sv(aTHX_ cophh, key, hash, (SV *)NULL, flags)
+
+#include "mydtrace.h"
struct cop {
BASEOP
/* On LP64 putting this here takes advantage of the fact that BASEOP isn't
an exact multiple of 8 bytes to save structure padding. */
line_t cop_line; /* line # of this command */
- char * cop_label; /* label for this construct */
+ /* label for this construct is now stored in cop_hints_hash */
#ifdef USE_ITHREADS
char * cop_stashpv; /* package line was compiled in */
char * cop_file; /* file name the following line # is from */
+ U32 cop_stashflags; /* currently only SVf_UTF8 */
#else
HV * cop_stash; /* package line was compiled in */
GV * cop_filegv; /* file the following line # is from */
STRLEN * cop_warnings; /* lexical warnings bitmask */
/* compile time state of %^H. See the comment in op.c for how this is
used to recreate a hash to return from caller. */
- struct refcounted_he * cop_hints_hash;
+ COPHH * cop_hints_hash;
};
#ifdef USE_ITHREADS
# define CopSTASHPV_set(c,pv) ((c)->cop_stashpv = savesharedpv(pv))
# endif
-# define CopSTASH(c) (CopSTASHPV(c) \
- ? gv_stashpv(CopSTASHPV(c),GV_ADD) : NULL)
-# define CopSTASH_set(c,hv) CopSTASHPV_set(c, (hv) ? HvNAME_get(hv) : NULL)
+# define CopSTASH_flags(c) ((c)->cop_stashflags)
+# define CopSTASH_flags_set(c,flags) ((c)->cop_stashflags = flags)
+
+# define CopSTASH(c) (CopSTASHPV(c) \
+ ? gv_stashpv(CopSTASHPV(c), \
+ GV_ADD|(CopSTASH_flags(c) \
+ ? CopSTASH_flags(c): 0 )) \
+ : NULL)
+# define CopSTASH_set(c,hv) (CopSTASHPV_set(c, (hv) ? HvNAME_get(hv) : NULL), \
+ CopSTASH_flags_set(c, \
+ ((hv) && HvNAME_HEK(hv) && \
+ HvNAMEUTF8(hv)) \
+ ? SVf_UTF8 \
+ : 0))
# define CopSTASH_eq(c,hv) ((hv) && stashpv_hvname_match(c,hv))
-# define CopLABEL(c) ((c)->cop_label)
-# define CopLABEL_set(c,pv) (CopLABEL(c) = (pv))
# ifdef NETWARE
# define CopSTASH_free(c) SAVECOPSTASH_FREE(c)
# define CopFILE_free(c) SAVECOPFILE_FREE(c)
-# define CopLABEL_free(c) SAVECOPLABEL_FREE(c)
-# define CopLABEL_alloc(pv) ((pv)?savepv(pv):NULL)
# else
# define CopSTASH_free(c) PerlMemShared_free(CopSTASHPV(c))
# define CopFILE_free(c) (PerlMemShared_free(CopFILE(c)),(CopFILE(c) = NULL))
-# define CopLABEL_free(c) (PerlMemShared_free(CopLABEL(c)),(CopLABEL(c) = NULL))
-# define CopLABEL_alloc(pv) ((pv)?savesharedpv(pv):NULL)
# endif
#else
# define CopFILEGV(c) ((c)->cop_filegv)
# define CopFILE(c) (CopFILEGV(c) && GvSV(CopFILEGV(c)) \
? SvPVX(GvSV(CopFILEGV(c))) : NULL)
# define CopSTASH(c) ((c)->cop_stash)
-# define CopLABEL(c) ((c)->cop_label)
# define CopSTASH_set(c,hv) ((c)->cop_stash = (hv))
# define CopSTASHPV(c) (CopSTASH(c) ? HvNAME_get(CopSTASH(c)) : NULL)
/* cop_stash is not refcounted */
# define CopSTASHPV_set(c,pv) CopSTASH_set((c), gv_stashpv(pv,GV_ADD))
# define CopSTASH_eq(c,hv) (CopSTASH(c) == (hv))
-# define CopLABEL_alloc(pv) ((pv)?savepv(pv):NULL)
-# define CopLABEL_set(c,pv) (CopLABEL(c) = (pv))
# define CopSTASH_free(c)
# define CopFILE_free(c) (SvREFCNT_dec(CopFILEGV(c)),(CopFILEGV(c) = NULL))
-# define CopLABEL_free(c) (Safefree(CopLABEL(c)),(CopLABEL(c) = NULL))
#endif /* USE_ITHREADS */
+#define CopHINTHASH_get(c) ((COPHH*)((c)->cop_hints_hash))
+#define CopHINTHASH_set(c,h) ((c)->cop_hints_hash = (h))
+
+/*
+=head1 COP Hint Reading
+*/
+
+/*
+=for apidoc Am|SV *|cop_hints_fetch_pvn|const COP *cop|const char *keypv|STRLEN keylen|U32 hash|U32 flags
+
+Look up the hint entry in the cop I<cop> with the key specified by
+I<keypv> and I<keylen>. If I<flags> has the C<COPHH_KEY_UTF8> bit set,
+the key octets are interpreted as UTF-8, otherwise they are interpreted
+as Latin-1. I<hash> is a precomputed hash of the key string, or zero if
+it has not been precomputed. Returns a mortal scalar copy of the value
+associated with the key, or C<&PL_sv_placeholder> if there is no value
+associated with the key.
+
+=cut
+*/
+
+#define cop_hints_fetch_pvn(cop, keypv, keylen, hash, flags) \
+ cophh_fetch_pvn(CopHINTHASH_get(cop), keypv, keylen, hash, flags)
+
+/*
+=for apidoc Am|SV *|cop_hints_fetch_pvs|const COP *cop|const char *key|U32 flags
+
+Like L</cop_hints_fetch_pvn>, but takes a literal string instead of a
+string/length pair, and no precomputed hash.
+
+=cut
+*/
+
+#define cop_hints_fetch_pvs(cop, key, flags) \
+ cophh_fetch_pvs(CopHINTHASH_get(cop), key, flags)
+
+/*
+=for apidoc Am|SV *|cop_hints_fetch_pv|const COP *cop|const char *key|U32 hash|U32 flags
+
+Like L</cop_hints_fetch_pvn>, but takes a nul-terminated string instead
+of a string/length pair.
+
+=cut
+*/
+
+#define cop_hints_fetch_pv(cop, key, hash, flags) \
+ cophh_fetch_pv(CopHINTHASH_get(cop), key, hash, flags)
+
+/*
+=for apidoc Am|SV *|cop_hints_fetch_sv|const COP *cop|SV *key|U32 hash|U32 flags
+
+Like L</cop_hints_fetch_pvn>, but takes a Perl scalar instead of a
+string/length pair.
+
+=cut
+*/
+
+#define cop_hints_fetch_sv(cop, key, hash, flags) \
+ cophh_fetch_sv(CopHINTHASH_get(cop), key, hash, flags)
+
+/*
+=for apidoc Am|HV *|cop_hints_2hv|const COP *cop|U32 flags
+
+Generates and returns a standard Perl hash representing the full set of
+hint entries in the cop I<cop>. I<flags> is currently unused and must
+be zero.
+
+=cut
+*/
+
+#define cop_hints_2hv(cop, flags) \
+ cophh_2hv(CopHINTHASH_get(cop), flags)
+
+#define CopLABEL(c) Perl_cop_fetch_label(aTHX_ (c), NULL, NULL)
+#define CopLABEL_alloc(pv) ((pv)?savepv(pv):NULL)
+
#define CopSTASH_ne(c,hv) (!CopSTASH_eq(c,hv))
#define CopLINE(c) ((c)->cop_line)
#define CopLINE_inc(c) (++CopLINE(c))
#define CopLINE_set(c,l) (CopLINE(c) = (l))
/* OutCopFILE() is CopFILE for output (caller, die, warn, etc.) */
-#ifdef MACOS_TRADITIONAL
-# define OutCopFILE(c) MacPerl_MPWFileName(CopFILE(c))
-#else
-# define OutCopFILE(c) CopFILE(c)
-#endif
-
-/* If $[ is non-zero, it's stored in cop_hints under the key "$[", and
- HINT_ARYBASE is set to indicate this.
- Setting it is ineficient due to the need to create 2 mortal SVs, but as
- using $[ is highly discouraged, no sane Perl code will be using it. */
-#define CopARYBASE_get(c) \
- ((CopHINTS_get(c) & HINT_ARYBASE) \
- ? SvIV(Perl_refcounted_he_fetch(aTHX_ (c)->cop_hints_hash, 0, \
- "$[", 2, 0, 0)) \
- : 0)
-#define CopARYBASE_set(c, b) STMT_START { \
- if (b || ((c)->cop_hints & HINT_ARYBASE)) { \
- (c)->cop_hints |= HINT_ARYBASE; \
- if ((c) == &PL_compiling) \
- PL_hints |= HINT_LOCALIZE_HH | HINT_ARYBASE; \
- (c)->cop_hints_hash \
- = Perl_refcounted_he_new(aTHX_ (c)->cop_hints_hash, \
- newSVpvs_flags("$[", SVs_TEMP), \
- sv_2mortal(newSViv(b))); \
- } \
- } STMT_END
+#define OutCopFILE(c) CopFILE(c)
/* FIXME NATIVE_HINTS if this is changed from op_private (see perl.h) */
#define CopHINTS_get(c) ((c)->cop_hints + 0)
/* subroutine context */
struct block_sub {
+ OP * retop; /* op to execute on exit from sub */
+ /* Above here is the same for sub, format and eval. */
CV * cv;
- GV * gv;
- GV * dfoutgv;
+ /* Above here is the same for sub and format. */
AV * savearray;
AV * argarray;
I32 olddepth;
- U8 hasargs;
- U8 lval; /* XXX merge lval and hasargs? */
PAD *oldcomppad;
+};
+
+
+/* format context */
+struct block_format {
OP * retop; /* op to execute on exit from sub */
+ /* Above here is the same for sub, format and eval. */
+ CV * cv;
+ /* Above here is the same for sub and format. */
+ GV * gv;
+ GV * dfoutgv;
};
/* base for the next two macros. Don't use directly.
* decremented by LEAVESUB, the other by LEAVE. */
#define PUSHSUB_BASE(cx) \
+ ENTRY_PROBE(GvENAME(CvGV(cv)), \
+ CopFILE((const COP *)CvSTART(cv)), \
+ CopLINE((const COP *)CvSTART(cv)), \
+ CopSTASHPV((const COP *)CvSTART(cv))); \
+ \
cx->blk_sub.cv = cv; \
cx->blk_sub.olddepth = CvDEPTH(cv); \
- cx->blk_sub.hasargs = hasargs; \
+ cx->cx_type |= (hasargs) ? CXp_HASARGS : 0; \
cx->blk_sub.retop = NULL; \
if (!CvDEPTH(cv)) { \
SvREFCNT_inc_simple_void_NN(cv); \
#define PUSHSUB(cx) \
+ { \
+ /* If the context is indeterminate, then only the lvalue */ \
+ /* flags that the caller also has are applicable. */ \
+ U8 phlags = \
+ (PL_op->op_flags & OPf_WANT) \
+ ? OPpENTERSUB_LVAL_MASK \
+ : !(PL_op->op_private & OPpENTERSUB_LVAL_MASK) \
+ ? 0 : Perl_was_lvalue_sub(aTHX); \
PUSHSUB_BASE(cx) \
- cx->blk_sub.lval = PL_op->op_private & \
- (OPpLVAL_INTRO|OPpENTERSUB_INARGS);
+ cx->blk_u16 = PL_op->op_private & \
+ (phlags|OPpDEREF); \
+ }
/* variant for use by OP_DBSTATE, where op_private holds hint bits */
#define PUSHSUB_DB(cx) \
PUSHSUB_BASE(cx) \
- cx->blk_sub.lval = 0;
+ cx->blk_u16 = 0;
-#define PUSHFORMAT(cx) \
- cx->blk_sub.cv = cv; \
- cx->blk_sub.gv = gv; \
- cx->blk_sub.retop = NULL; \
- cx->blk_sub.hasargs = 0; \
- cx->blk_sub.dfoutgv = PL_defoutgv; \
- SvREFCNT_inc_void(cx->blk_sub.dfoutgv)
+#define PUSHFORMAT(cx, retop) \
+ cx->blk_format.cv = cv; \
+ cx->blk_format.gv = gv; \
+ cx->blk_format.retop = (retop); \
+ cx->blk_format.dfoutgv = PL_defoutgv; \
+ SvREFCNT_inc_void(cx->blk_format.dfoutgv)
#define POP_SAVEARRAY() \
STMT_START { \
#define POPSUB(cx,sv) \
STMT_START { \
- if (cx->blk_sub.hasargs) { \
+ RETURN_PROBE(GvENAME(CvGV((const CV*)cx->blk_sub.cv)), \
+ CopFILE((COP*)CvSTART((const CV*)cx->blk_sub.cv)), \
+ CopLINE((COP*)CvSTART((const CV*)cx->blk_sub.cv)), \
+ CopSTASHPV((COP*)CvSTART((const CV*)cx->blk_sub.cv))); \
+ \
+ if (CxHASARGS(cx)) { \
POP_SAVEARRAY(); \
/* abandon @_ if it got reified */ \
if (AvREAL(cx->blk_sub.argarray)) { \
cx->blk_sub.argarray = newAV(); \
av_extend(cx->blk_sub.argarray, fill); \
AvREIFY_only(cx->blk_sub.argarray); \
- CX_CURPAD_SV(cx->blk_sub, 0) = (SV*)cx->blk_sub.argarray; \
+ CX_CURPAD_SV(cx->blk_sub, 0) = MUTABLE_SV(cx->blk_sub.argarray); \
} \
else { \
CLEAR_ARGARRAY(cx->blk_sub.argarray); \
} \
} \
- sv = (SV*)cx->blk_sub.cv; \
- if (sv && (CvDEPTH((CV*)sv) = cx->blk_sub.olddepth)) \
+ sv = MUTABLE_SV(cx->blk_sub.cv); \
+ if (sv && (CvDEPTH((const CV*)sv) = cx->blk_sub.olddepth)) \
sv = NULL; \
} STMT_END
} STMT_END
#define POPFORMAT(cx) \
- setdefout(cx->blk_sub.dfoutgv); \
- SvREFCNT_dec(cx->blk_sub.dfoutgv);
+ setdefout(cx->blk_format.dfoutgv); \
+ SvREFCNT_dec(cx->blk_format.dfoutgv);
/* eval context */
struct block_eval {
- U8 old_in_eval;
- U16 old_op_type;
+ OP * retop; /* op to execute on exit from eval */
+ /* Above here is the same for sub, format and eval. */
SV * old_namesv;
OP * old_eval_root;
SV * cur_text;
CV * cv;
- OP * retop; /* op to execute on exit from eval */
JMPENV * cur_top_env; /* value of PL_top_env when eval CX created */
};
-#define PUSHEVAL(cx,n,fgv) \
+/* If we ever need more than 512 op types, change the shift from 7.
+ blku_gimme is actually also only 2 bits, so could be merged with something.
+*/
+
+#define CxOLD_IN_EVAL(cx) (((cx)->blk_u16) & 0x7F)
+#define CxOLD_OP_TYPE(cx) (((cx)->blk_u16) >> 7)
+
+#define PUSHEVAL(cx,n) \
STMT_START { \
- cx->blk_eval.old_in_eval = PL_in_eval; \
- cx->blk_eval.old_op_type = PL_op->op_type; \
+ assert(!(PL_in_eval & ~0x7F)); \
+ assert(!(PL_op->op_type & ~0x1FF)); \
+ cx->blk_u16 = (PL_in_eval & 0x7F) | ((U16)PL_op->op_type << 7); \
cx->blk_eval.old_namesv = (n ? newSVpv(n,0) : NULL); \
cx->blk_eval.old_eval_root = PL_eval_root; \
cx->blk_eval.cur_text = PL_parser ? PL_parser->linestr : NULL; \
#define POPEVAL(cx) \
STMT_START { \
- PL_in_eval = cx->blk_eval.old_in_eval; \
- optype = cx->blk_eval.old_op_type; \
+ PL_in_eval = CxOLD_IN_EVAL(cx); \
+ optype = CxOLD_OP_TYPE(cx); \
PL_eval_root = cx->blk_eval.old_eval_root; \
if (cx->blk_eval.old_namesv) \
sv_2mortal(cx->blk_eval.old_namesv); \
/* loop context */
struct block_loop {
- char * label;
I32 resetsp;
LOOP * my_op; /* My op, that contains redo, next and last ops. */
- /* (except for non_ithreads we need to modify next_op in pp_ctl.c, hence
- why next_op is conditionally defined below.) */
-#ifdef USE_ITHREADS
- void * iterdata;
- PAD *oldcomppad;
-#else
- OP * next_op;
- SV ** itervar;
-#endif
- SV * itersave;
- /* (from inspection of source code) for a .. range of strings this is the
- current string. */
- SV * iterlval;
- /* (from inspection of source code) for a foreach loop this is the array
- being iterated over. For a .. range of numbers it's the current value.
- A check is often made on the SvTYPE of iterary to determine whether
- we are iterating over an array or a range. (numbers or strings) */
- AV * iterary;
- IV iterix;
- /* (from inspection of source code) for a .. range of numbers this is the
- maximum value. */
- IV itermax;
+ union { /* different ways of locating the iteration variable */
+ SV **svp;
+ GV *gv;
+ PAD *oldcomppad; /* only used in ITHREADS */
+ } itervar_u;
+ union {
+ struct { /* valid if type is LOOP_FOR or LOOP_PLAIN (but {NULL,0})*/
+ AV * ary; /* use the stack if this is NULL */
+ IV ix;
+ } ary;
+ struct { /* valid if type is LOOP_LAZYIV */
+ IV cur;
+ IV end;
+ } lazyiv;
+ struct { /* valid if type if LOOP_LAZYSV */
+ SV * cur;
+ SV * end; /* maxiumum value (or minimum in reverse) */
+ } lazysv;
+ } state_u;
};
-/* It might be possible to squeeze this structure further. As best I can tell
- itermax and iterlval are never used at the same time, so it might be possible
- to make them into a union. However, I'm not confident that there are enough
- flag bits/NULLable pointers in this structure alone to encode which is
- active. There is, however, U8 of space free in struct block, which could be
- used. Right now it may not be worth squeezing this structure further, as it's
- the largest part of struct block, and currently struct block is 64 bytes on
- an ILP32 system, which will give good cache alignment.
-*/
#ifdef USE_ITHREADS
-# define CxITERVAR(c) \
- ((c)->blk_loop.iterdata \
- ? (CxPADLOOP(cx) \
- ? &CX_CURPAD_SV( (c)->blk_loop, \
- INT2PTR(PADOFFSET, (c)->blk_loop.iterdata)) \
- : &GvSV((GV*)(c)->blk_loop.iterdata)) \
- : (SV**)NULL)
-# define CX_ITERDATA_SET(cx,idata) \
- CX_CURPAD_SAVE(cx->blk_loop); \
- if ((cx->blk_loop.iterdata = (idata))) \
- cx->blk_loop.itersave = SvREFCNT_inc(*CxITERVAR(cx)); \
- else \
- cx->blk_loop.itersave = NULL;
+# define CxITERVAR_PADSV(c) \
+ &CX_CURPAD_SV( (c)->blk_loop.itervar_u, (c)->blk_loop.my_op->op_targ)
#else
-# define CxITERVAR(c) ((c)->blk_loop.itervar)
-# define CX_ITERDATA_SET(cx,ivar) \
- if ((cx->blk_loop.itervar = (SV**)(ivar))) \
- cx->blk_loop.itersave = SvREFCNT_inc(*CxITERVAR(cx)); \
- else \
- cx->blk_loop.itersave = NULL;
+# define CxITERVAR_PADSV(c) ((c)->blk_loop.itervar_u.svp)
#endif
-#ifdef USE_ITHREADS
-# define PUSHLOOP_OP_NEXT /* No need to do anything. */
-# define CX_LOOP_NEXTOP_GET(cx) ((cx)->blk_loop.my_op->op_nextop + 0)
-#else
-# define PUSHLOOP_OP_NEXT cx->blk_loop.next_op = cLOOP->op_nextop
-# define CX_LOOP_NEXTOP_GET(cx) ((cx)->blk_loop.next_op + 0)
-#endif
+#define CxITERVAR(c) \
+ ((c)->blk_loop.itervar_u.oldcomppad \
+ ? (CxPADLOOP(c) \
+ ? CxITERVAR_PADSV(c) \
+ : &GvSV((c)->blk_loop.itervar_u.gv)) \
+ : (SV**)NULL)
+
+#define CxLABEL(c) (0 + CopLABEL((c)->blk_oldcop))
+#define CxHASARGS(c) (((c)->cx_type & CXp_HASARGS) == CXp_HASARGS)
+#define CxLVAL(c) (0 + (c)->blk_u16)
-#define PUSHLOOP(cx, dat, s) \
- cx->blk_loop.label = PL_curcop->cop_label; \
+#define PUSHLOOP_PLAIN(cx, s) \
cx->blk_loop.resetsp = s - PL_stack_base; \
cx->blk_loop.my_op = cLOOP; \
- PUSHLOOP_OP_NEXT; \
- cx->blk_loop.iterlval = NULL; \
- cx->blk_loop.iterary = NULL; \
- cx->blk_loop.iterix = -1; \
- CX_ITERDATA_SET(cx,dat);
+ cx->blk_loop.state_u.ary.ary = NULL; \
+ cx->blk_loop.state_u.ary.ix = 0; \
+ cx->blk_loop.itervar_u.svp = NULL;
+
+#define PUSHLOOP_FOR(cx, ivar, s) \
+ cx->blk_loop.resetsp = s - PL_stack_base; \
+ cx->blk_loop.my_op = cLOOP; \
+ cx->blk_loop.state_u.ary.ary = NULL; \
+ cx->blk_loop.state_u.ary.ix = 0; \
+ cx->blk_loop.itervar_u.svp = (SV**)(ivar);
#define POPLOOP(cx) \
- SvREFCNT_dec(cx->blk_loop.iterlval); \
- if (CxITERVAR(cx)) { \
- if (SvPADMY(cx->blk_loop.itersave)) { \
- SV ** const s_v_p = CxITERVAR(cx); \
- sv_2mortal(*s_v_p); \
- *s_v_p = cx->blk_loop.itersave; \
- } \
- else { \
- SvREFCNT_dec(cx->blk_loop.itersave); \
- } \
+ if (CxTYPE(cx) == CXt_LOOP_LAZYSV) { \
+ SvREFCNT_dec(cx->blk_loop.state_u.lazysv.cur); \
+ SvREFCNT_dec(cx->blk_loop.state_u.lazysv.end); \
} \
- if (cx->blk_loop.iterary && cx->blk_loop.iterary != PL_curstack)\
- SvREFCNT_dec(cx->blk_loop.iterary);
+ if (CxTYPE(cx) == CXt_LOOP_FOR) \
+ SvREFCNT_dec(cx->blk_loop.state_u.ary.ary);
/* given/when context */
struct block_givwhen {
/* context common to subroutines, evals and loops */
struct block {
- U16 blku_type; /* what kind of context this is */
+ U8 blku_type; /* what kind of context this is */
U8 blku_gimme; /* is this block running in list context? */
- U8 blku_spare; /* Padding to match with struct subst */
+ U16 blku_u16; /* used by block_sub and block_eval (so far) */
I32 blku_oldsp; /* stack pointer to copy stuff down to */
COP * blku_oldcop; /* old curcop pointer */
I32 blku_oldmarksp; /* mark stack index */
union {
struct block_sub blku_sub;
+ struct block_format blku_format;
struct block_eval blku_eval;
struct block_loop blku_loop;
struct block_givwhen blku_givwhen;
#define blk_oldscopesp cx_u.cx_blk.blku_oldscopesp
#define blk_oldpm cx_u.cx_blk.blku_oldpm
#define blk_gimme cx_u.cx_blk.blku_gimme
+#define blk_u16 cx_u.cx_blk.blku_u16
#define blk_sub cx_u.cx_blk.blk_u.blku_sub
+#define blk_format cx_u.cx_blk.blk_u.blku_format
#define blk_eval cx_u.cx_blk.blk_u.blku_eval
#define blk_loop cx_u.cx_blk.blk_u.blku_loop
#define blk_givwhen cx_u.cx_blk.blk_u.blku_givwhen
+#define DEBUG_CX(action) \
+ DEBUG_l( \
+ Perl_deb(aTHX_ "CX %ld %s %s (scope %ld,%ld) at %s:%d\n", \
+ (long)cxstack_ix, \
+ action, \
+ PL_block_type[CxTYPE(&cxstack[cxstack_ix])], \
+ (long)PL_scopestack_ix, \
+ (long)(cxstack[cxstack_ix].blk_oldscopesp), \
+ __FILE__, __LINE__));
+
/* Enter a block. */
#define PUSHBLOCK(cx,t,sp) CXINC, cx = &cxstack[cxstack_ix], \
cx->cx_type = t, \
cx->blk_oldscopesp = PL_scopestack_ix, \
cx->blk_oldpm = PL_curpm, \
cx->blk_gimme = (U8)gimme; \
- DEBUG_l( PerlIO_printf(Perl_debug_log, "Entering block %ld, type %s\n", \
- (long)cxstack_ix, PL_block_type[CxTYPE(cx)]); )
+ DEBUG_CX("PUSH");
/* Exit a block (RETURN and LAST). */
-#define POPBLOCK(cx,pm) cx = &cxstack[cxstack_ix--], \
+#define POPBLOCK(cx,pm) \
+ DEBUG_CX("POP"); \
+ cx = &cxstack[cxstack_ix--], \
newsp = PL_stack_base + cx->blk_oldsp, \
PL_curcop = cx->blk_oldcop, \
PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp, \
PL_scopestack_ix = cx->blk_oldscopesp, \
pm = cx->blk_oldpm, \
- gimme = cx->blk_gimme; \
- DEBUG_SCOPE("POPBLOCK"); \
- DEBUG_l( PerlIO_printf(Perl_debug_log, "Leaving block %ld, type %s\n", \
- (long)cxstack_ix+1,PL_block_type[CxTYPE(cx)]); )
+ gimme = cx->blk_gimme;
/* Continue a block elsewhere (NEXT and REDO). */
-#define TOPBLOCK(cx) cx = &cxstack[cxstack_ix], \
+#define TOPBLOCK(cx) \
+ DEBUG_CX("TOP"); \
+ cx = &cxstack[cxstack_ix], \
PL_stack_sp = PL_stack_base + cx->blk_oldsp, \
PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp, \
PL_scopestack_ix = cx->blk_oldscopesp, \
- PL_curpm = cx->blk_oldpm; \
- DEBUG_SCOPE("TOPBLOCK");
+ PL_curpm = cx->blk_oldpm;
/* substitution context */
struct subst {
- U16 sbu_type; /* what kind of context this is */
- U8 sbu_once; /* Actually both booleans, but U8 to matches */
- U8 sbu_rxtainted; /* struct block */
+ U8 sbu_type; /* what kind of context this is */
+ U8 sbu_rflags;
+ U16 sbu_rxtainted; /* matches struct block */
I32 sbu_iters;
I32 sbu_maxiters;
- I32 sbu_rflags;
I32 sbu_oldsave;
char * sbu_orig;
SV * sbu_dstr;
#define sb_maxiters cx_u.cx_subst.sbu_maxiters
#define sb_rflags cx_u.cx_subst.sbu_rflags
#define sb_oldsave cx_u.cx_subst.sbu_oldsave
-#define sb_once cx_u.cx_subst.sbu_once
#define sb_rxtainted cx_u.cx_subst.sbu_rxtainted
#define sb_orig cx_u.cx_subst.sbu_orig
#define sb_dstr cx_u.cx_subst.sbu_dstr
#define sb_rxres cx_u.cx_subst.sbu_rxres
#define sb_rx cx_u.cx_subst.sbu_rx
-#define PUSHSUBST(cx) CXINC, cx = &cxstack[cxstack_ix], \
+#ifdef PERL_CORE
+# define PUSHSUBST(cx) CXINC, cx = &cxstack[cxstack_ix], \
cx->sb_iters = iters, \
cx->sb_maxiters = maxiters, \
cx->sb_rflags = r_flags, \
cx->sb_oldsave = oldsave, \
- cx->sb_once = once, \
cx->sb_rxtainted = rxtainted, \
cx->sb_orig = orig, \
cx->sb_dstr = dstr, \
cx->sb_strend = strend, \
cx->sb_rxres = NULL, \
cx->sb_rx = rx, \
- cx->cx_type = CXt_SUBST; \
+ cx->cx_type = CXt_SUBST | (once ? CXp_ONCE : 0); \
rxres_save(&cx->sb_rxres, rx); \
(void)ReREFCNT_inc(rx)
-#define POPSUBST(cx) cx = &cxstack[cxstack_ix--]; \
+# define POPSUBST(cx) cx = &cxstack[cxstack_ix--]; \
rxres_free(&cx->sb_rxres); \
ReREFCNT_dec(cx->sb_rx)
+#endif
+
+#define CxONCE(cx) ((cx)->cx_type & CXp_ONCE)
struct context {
union {
};
#define cx_type cx_u.cx_subst.sbu_type
-#define CXTYPEMASK 0xff
+/* If you re-order these, there is also an array of uppercase names in perl.h
+ and a static array of context names in pp_ctl.c */
+#define CXTYPEMASK 0xf
#define CXt_NULL 0
-#define CXt_SUB 1
-#define CXt_EVAL 2
-#define CXt_LOOP 3
-#define CXt_SUBST 4
-#define CXt_BLOCK 5
-#define CXt_FORMAT 6
-#define CXt_GIVEN 7
-#define CXt_WHEN 8
-
-/* private flags for CXt_SUB and CXt_NULL */
-#define CXp_MULTICALL 0x00000400 /* part of a multicall (so don't
- tear down context on exit). */
+#define CXt_WHEN 1
+#define CXt_BLOCK 2
+/* When micro-optimising :-) keep GIVEN next to the LOOPs, as these 5 share a
+ jump table in pp_ctl.c
+ The first 4 don't have a 'case' in at least one switch statement in pp_ctl.c
+*/
+#define CXt_GIVEN 3
+/* This is first so that CXt_LOOP_FOR|CXt_LOOP_LAZYIV is CXt_LOOP_LAZYIV */
+#define CXt_LOOP_FOR 4
+#define CXt_LOOP_PLAIN 5
+#define CXt_LOOP_LAZYSV 6
+#define CXt_LOOP_LAZYIV 7
+#define CXt_SUB 8
+#define CXt_FORMAT 9
+#define CXt_EVAL 10
+#define CXt_SUBST 11
+/* SUBST doesn't feature in all switch statements. */
+
+/* private flags for CXt_SUB and CXt_NULL
+ However, this is checked in many places which do not check the type, so
+ this bit needs to be kept clear for most everything else. For reasons I
+ haven't investigated, it can coexist with CXp_FOR_DEF */
+#define CXp_MULTICALL 0x10 /* part of a multicall (so don't
+ tear down context on exit). */
+
+/* private flags for CXt_SUB and CXt_FORMAT */
+#define CXp_HASARGS 0x20
/* private flags for CXt_EVAL */
-#define CXp_REAL 0x00000100 /* truly eval'', not a lookalike */
-#define CXp_TRYBLOCK 0x00000200 /* eval{}, not eval'' or similar */
+#define CXp_REAL 0x20 /* truly eval'', not a lookalike */
+#define CXp_TRYBLOCK 0x40 /* eval{}, not eval'' or similar */
/* private flags for CXt_LOOP */
-#define CXp_FOREACH 0x00000200 /* a foreach loop */
-#define CXp_FOR_DEF 0x00000400 /* foreach using $_ */
-#ifdef USE_ITHREADS
-# define CXp_PADVAR 0x00000100 /* itervar lives on pad, iterdata
- has pad offset; if not set,
- iterdata holds GV* */
-# define CxPADLOOP(c) (((c)->cx_type & (CXt_LOOP|CXp_PADVAR)) \
- == (CXt_LOOP|CXp_PADVAR))
-#endif
+#define CXp_FOR_DEF 0x10 /* foreach using $_ */
+#define CxPADLOOP(c) ((c)->blk_loop.my_op->op_targ)
+
+/* private flags for CXt_SUBST */
+#define CXp_ONCE 0x10 /* What was sbu_once in struct subst */
#define CxTYPE(c) ((c)->cx_type & CXTYPEMASK)
+#define CxTYPE_is_LOOP(c) (((c)->cx_type & 0xC) == 0x4)
#define CxMULTICALL(c) (((c)->cx_type & CXp_MULTICALL) \
== CXp_MULTICALL)
-#define CxREALEVAL(c) (((c)->cx_type & (CXt_EVAL|CXp_REAL)) \
+#define CxREALEVAL(c) (((c)->cx_type & (CXTYPEMASK|CXp_REAL)) \
== (CXt_EVAL|CXp_REAL))
-#define CxTRYBLOCK(c) (((c)->cx_type & (CXt_EVAL|CXp_TRYBLOCK)) \
+#define CxTRYBLOCK(c) (((c)->cx_type & (CXTYPEMASK|CXp_TRYBLOCK)) \
== (CXt_EVAL|CXp_TRYBLOCK))
-#define CxFOREACH(c) (((c)->cx_type & (CXt_LOOP|CXp_FOREACH)) \
- == (CXt_LOOP|CXp_FOREACH))
-#define CxFOREACHDEF(c) (((c)->cx_type & (CXt_LOOP|CXp_FOREACH|CXp_FOR_DEF))\
- == (CXt_LOOP|CXp_FOREACH|CXp_FOR_DEF))
+#define CxFOREACH(c) (CxTYPE_is_LOOP(c) && CxTYPE(c) != CXt_LOOP_PLAIN)
+#define CxFOREACHDEF(c) ((CxTYPE_is_LOOP(c) && CxTYPE(c) != CXt_LOOP_PLAIN) \
+ && ((c)->cx_type & CXp_FOR_DEF))
#define CXINC (cxstack_ix < cxstack_max ? ++cxstack_ix : (cxstack_ix = cxinc()))
=cut
*/
-#define G_SCALAR 0
-#define G_ARRAY 1
-#define G_VOID 128 /* skip this bit when adding flags below */
+#define G_SCALAR 2
+#define G_ARRAY 3
+#define G_VOID 1
+#define G_WANT 3
/* extra flags for Perl_call_* routines */
-#define G_DISCARD 2 /* Call FREETMPS.
+#define G_DISCARD 4 /* Call FREETMPS.
Don't change this without consulting the
hash actions codes defined in hv.h */
-#define G_EVAL 4 /* Assume eval {} around subroutine call. */
-#define G_NOARGS 8 /* Don't construct a @_ array. */
-#define G_KEEPERR 16 /* Append errors to $@, don't overwrite it */
-#define G_NODEBUG 32 /* Disable debugging at toplevel. */
-#define G_METHOD 64 /* Calling method. */
+#define G_EVAL 8 /* Assume eval {} around subroutine call. */
+#define G_NOARGS 16 /* Don't construct a @_ array. */
+#define G_KEEPERR 32 /* Warn for errors, don't overwrite $@ */
+#define G_NODEBUG 64 /* Disable debugging at toplevel. */
+#define G_METHOD 128 /* Calling method. */
#define G_FAKINGEVAL 256 /* Faking an eval context for call_sv or
fold_constants. */
+#define G_UNDEF_FILL 512 /* Fill the stack with &PL_sv_undef
+ A special case for UNSHIFT in
+ Perl_magic_methcall(). */
+#define G_WRITING_TO_STDERR 1024 /* Perl_write_to_stderr() is calling
+ Perl_magic_methcall(). */
/* flag bits for PL_in_eval */
#define EVAL_NULL 0 /* not in an eval */
#define PUSHSTACKi(type) \
STMT_START { \
PERL_SI *next = PL_curstackinfo->si_next; \
+ DEBUG_l({ \
+ int i = 0; PERL_SI *p = PL_curstackinfo; \
+ while (p) { i++; p = p->si_prev; } \
+ Perl_deb(aTHX_ "push STACKINFO %d at %s:%d\n", \
+ i, __FILE__, __LINE__);}) \
if (!next) { \
next = new_stackinfo(32, 2048/sizeof(PERL_CONTEXT) - 1); \
next->si_prev = PL_curstackinfo; \
STMT_START { \
dSP; \
PERL_SI * const prev = PL_curstackinfo->si_prev; \
+ DEBUG_l({ \
+ int i = -1; PERL_SI *p = PL_curstackinfo; \
+ while (p) { i++; p = p->si_prev; } \
+ Perl_deb(aTHX_ "pop STACKINFO %d at %s:%d\n", \
+ i, __FILE__, __LINE__);}) \
if (!prev) { \
PerlIO_printf(Perl_error_log, "panic: POPSTACK\n"); \
my_exit(1); \
=head1 Multicall Functions
=for apidoc Ams||dMULTICALL
-Declare local variables for a multicall. See L<perlcall/Lightweight Callbacks>.
+Declare local variables for a multicall. See L<perlcall/LIGHTWEIGHT CALLBACKS>.
=for apidoc Ams||PUSH_MULTICALL
Opening bracket for a lightweight callback.
-See L<perlcall/Lightweight Callbacks>.
+See L<perlcall/LIGHTWEIGHT CALLBACKS>.
=for apidoc Ams||MULTICALL
-Make a lightweight callback. See L<perlcall/Lightweight Callbacks>.
+Make a lightweight callback. See L<perlcall/LIGHTWEIGHT CALLBACKS>.
=for apidoc Ams||POP_MULTICALL
Closing bracket for a lightweight callback.
-See L<perlcall/Lightweight Callbacks>.
+See L<perlcall/LIGHTWEIGHT CALLBACKS>.
=cut
*/
multicall_oldcatch = CATCH_GET; \
SAVETMPS; SAVEVPTR(PL_op); \
CATCH_SET(TRUE); \
+ PUSHSTACKi(PERLSI_SORT); \
PUSHBLOCK(cx, CXt_SUB|CXp_MULTICALL, PL_stack_sp); \
PUSHSUB(cx); \
if (++CvDEPTH(cv) >= 2) { \
#define POP_MULTICALL \
STMT_START { \
- LEAVESUB(multicall_cv); \
- CvDEPTH(multicall_cv)--; \
+ if (! --CvDEPTH(multicall_cv)) \
+ LEAVESUB(multicall_cv); \
POPBLOCK(cx,PL_curpm); \
+ POPSTACK; \
CATCH_SET(multicall_oldcatch); \
LEAVE; \
+ SPAGAIN; \
} STMT_END
/*