ckWARN_d(WARN_UTF8) ? 0 : UTF8_ALLOW_ANY)
#define to_uni_fold(c, p, lenp) _to_uni_fold_flags(c, p, lenp, FOLD_FLAGS_FULL)
-#define to_utf8_fold(c, p, lenp) _to_utf8_fold_flags(c, p, lenp, \
- FOLD_FLAGS_FULL, NULL)
-#define to_utf8_lower(a,b,c) _to_utf8_lower_flags(a,b,c,0, NULL)
-#define to_utf8_upper(a,b,c) _to_utf8_upper_flags(a,b,c,0, NULL)
-#define to_utf8_title(a,b,c) _to_utf8_title_flags(a,b,c,0, NULL)
+#define to_utf8_fold(c, p, lenp) _to_utf8_fold_flags(c, p, lenp, FOLD_FLAGS_FULL)
+#define to_utf8_lower(a,b,c) _to_utf8_lower_flags(a,b,c,0)
+#define to_utf8_upper(a,b,c) _to_utf8_upper_flags(a,b,c,0)
+#define to_utf8_title(a,b,c) _to_utf8_title_flags(a,b,c,0)
/* Source backward compatibility. */
#define is_utf8_string_loc(s, len, ep) is_utf8_string_loclen(s, len, ep, 0)
#define foldEQ_utf8(s1, pe1, l1, u1, s2, pe2, l2, u2) \
foldEQ_utf8_flags(s1, pe1, l1, u1, s2, pe2, l2, u2, 0)
-#define FOLDEQ_UTF8_NOMIX_ASCII (1 << 0)
-#define FOLDEQ_UTF8_LOCALE (1 << 1)
+#define FOLDEQ_UTF8_NOMIX_ASCII (1 << 0)
+#define FOLDEQ_LOCALE (1 << 1)
#define FOLDEQ_S1_ALREADY_FOLDED (1 << 2)
#define FOLDEQ_S2_ALREADY_FOLDED (1 << 3)
-/*
-=for apidoc ibcmp_utf8
-
-This is a synonym for (! foldEQ_utf8())
-
-=cut
-*/
#define ibcmp_utf8(s1, pe1, l1, u1, s2, pe2, l2, u2) \
cBOOL(! foldEQ_utf8(s1, pe1, l1, u1, s2, pe2, l2, u2))
(((UV) UTF_CONTINUATION_MASK) << ((sizeof(UV) * CHARBITS) \
- UTF_ACCUMULATION_SHIFT))
-#ifdef HAS_QUAD
+#if UVSIZE >= 8
+# define UTF8_QUAD_MAX UINT64_C(0x1000000000)
+
/* Input is a true Unicode (not-native) code point */
#define OFFUNISKIP(uv) ( (uv) < 0x80 ? 1 : \
(uv) < 0x800 ? 2 : \
#error UTF8_MAXBYTES must be at least 12
#endif
+/* ^? is defined to be DEL on ASCII systems. See the definition of toCTRL()
+ * for more */
+#define QUESTION_MARK_CTRL DEL_NATIVE
+
#define MAX_UTF8_TWO_BYTE 0x7FF
#define UTF8_MAXBYTES_CASE UTF8_MAXBYTES
* UTF-8 encoded string) */
#define UTF8_IS_INVARIANT(c) UNI_IS_INVARIANT(NATIVE_UTF8_TO_I8(c))
-#define NATIVE_IS_INVARIANT(c) UNI_IS_INVARIANT(NATIVE_TO_LATIN1(c))
+/* Like the above, but its name implies a non-UTF8 input, and is implemented
+ * differently (for no particular reason) */
+#define NATIVE_BYTE_IS_INVARIANT(c) UNI_IS_INVARIANT(NATIVE_TO_LATIN1(c))
+
+/* Like the above, but accepts any UV as input */
+#define UVCHR_IS_INVARIANT(uv) UNI_IS_INVARIANT(NATIVE_TO_UNI(uv))
#define MAX_PORTABLE_UTF8_TWO_BYTE 0x3FF /* constrained by EBCDIC */
-/* The macros in the next sets are used to generate the two utf8 or utfebcdic
- * bytes from an ordinal that is known to fit into two bytes; it must be less
- * than 0x3FF to work across both encodings. */
-/* Nocast allows these to be used in the case label of a switch statement;
- * however this doesn't won't work for ebcdic, and should be avoided. Use
- * regen/unicode_constants instead */
-#define UTF8_TWO_BYTE_HI_nocast(c) I8_TO_NATIVE_UTF8((NATIVE_TO_UNI(c) \
- >> UTF_ACCUMULATION_SHIFT) | UTF_START_MARK(2))
-#define UTF8_TWO_BYTE_LO_nocast(c) I8_TO_NATIVE_UTF8((NATIVE_TO_UNI(c) \
- & UTF_CONTINUATION_MASK) \
- | UTF_CONTINUATION_MARK)
-
-#define UTF8_TWO_BYTE_HI(c) ((U8) (UTF8_TWO_BYTE_HI_nocast(c)))
-#define UTF8_TWO_BYTE_LO(c) ((U8) (UTF8_TWO_BYTE_LO_nocast(c)))
-
-/* This name is used when the source is a single byte (input not checked).
- * These expand identically to the TWO_BYTE versions on ASCII platforms, but
- * use to/from LATIN1 instead of UNI, which on EBCDIC eliminates tests */
-#define UTF8_EIGHT_BIT_HI(c) I8_TO_NATIVE_UTF8((NATIVE_TO_LATIN1(c) \
- >> UTF_ACCUMULATION_SHIFT) | UTF_START_MARK(2))
-#define UTF8_EIGHT_BIT_LO(c) I8_TO_NATIVE_UTF8((NATIVE_TO_LATIN1(c) \
- & UTF_CONTINUATION_MASK) \
- | UTF_CONTINUATION_MARK)
+/* The macros in the next 4 sets are used to generate the two utf8 or utfebcdic
+ * bytes from an ordinal that is known to fit into exactly two (not one) bytes;
+ * it must be less than 0x3FF to work across both encodings. */
+
+/* These two are helper macros for the other three sets, and should not be used
+ * directly anywhere else. 'translate_function' is either NATIVE_TO_LATIN1
+ * (which works for code points up to 0xFF) or NATIVE_TO_UNI which works for any
+ * code point */
+#define __BASE_TWO_BYTE_HI(c, translate_function) \
+ I8_TO_NATIVE_UTF8((translate_function(c) >> UTF_ACCUMULATION_SHIFT) \
+ | UTF_START_MARK(2))
+#define __BASE_TWO_BYTE_LO(c, translate_function) \
+ I8_TO_NATIVE_UTF8((translate_function(c) & UTF_CONTINUATION_MASK) \
+ | UTF_CONTINUATION_MARK)
+
+/* The next two macros should not be used. They were designed to be usable as
+ * the case label of a switch statement, but this doesn't work for EBCDIC. Use
+ * regen/unicode_constants.pl instead */
+#define UTF8_TWO_BYTE_HI_nocast(c) __BASE_TWO_BYTE_HI(c, NATIVE_TO_UNI)
+#define UTF8_TWO_BYTE_LO_nocast(c) __BASE_TWO_BYTE_LO(c, NATIVE_TO_UNI)
+
+/* The next two macros are used when the source should be a single byte
+ * character; checked for under DEBUGGING */
+#define UTF8_EIGHT_BIT_HI(c) (__ASSERT_(FITS_IN_8_BITS(c)) \
+ ((U8) __BASE_TWO_BYTE_HI(c, NATIVE_TO_LATIN1)))
+#define UTF8_EIGHT_BIT_LO(c) (__ASSERT_(FITS_IN_8_BITS(c)) \
+ ((U8) __BASE_TWO_BYTE_LO(c, NATIVE_TO_LATIN1)))
+
+/* These final two macros in the series are used when the source can be any
+ * code point whose UTF-8 is known to occupy 2 bytes; they are less efficient
+ * than the EIGHT_BIT versions on EBCDIC platforms. We use the logical '~'
+ * operator instead of "<=" to avoid getting compiler warnings.
+ * MAX_PORTABLE_UTF8_TWO_BYTE should be exactly all one bits in the lower few
+ * places, so the ~ works */
+#define UTF8_TWO_BYTE_HI(c) \
+ (__ASSERT_((sizeof(c) == 1) \
+ || !(((WIDEST_UTYPE)(c)) & ~MAX_PORTABLE_UTF8_TWO_BYTE)) \
+ ((U8) __BASE_TWO_BYTE_HI(c, NATIVE_TO_LATIN1)))
+#define UTF8_TWO_BYTE_LO(c) \
+ (__ASSERT_((sizeof(c) == 1) \
+ || !(((WIDEST_UTYPE)(c)) & ~MAX_PORTABLE_UTF8_TWO_BYTE)) \
+ ((U8) __BASE_TWO_BYTE_LO(c, NATIVE_TO_LATIN1)))
/* This is illegal in any well-formed UTF-8 in both EBCDIC and ASCII
* as it is only in overlongs. */
#define IN_BYTES (CopHINTS_get(PL_curcop) & HINT_BYTES)
#define DO_UTF8(sv) (SvUTF8(sv) && !IN_BYTES)
#define IN_UNI_8_BIT \
- (CopHINTS_get(PL_curcop) & (HINT_UNI_8_BIT|HINT_LOCALE_NOT_CHARS) \
- && ! IN_LOCALE_RUNTIME && ! IN_BYTES)
+ (((CopHINTS_get(PL_curcop) & (HINT_UNI_8_BIT)) \
+ || (CopHINTS_get(PL_curcop) & HINT_LOCALE_PARTIAL \
+ /* -1 below is for :not_characters */ \
+ && _is_in_locale_category(FALSE, -1))) \
+ && ! IN_BYTES)
#define UTF8_ALLOW_EMPTY 0x0001 /* Allow a zero length string */
#define UTF8_WARN_SUPER 0x0400 /* points above the legal max */
/* Code points which never were part of the original UTF-8 standard, the first
- * byte of which is a FE or FF on ASCII platforms. */
+ * byte of which is a FE or FF on ASCII platforms. If the first byte is FF, it
+ * will overflow a 32-bit word. If the first byte is FE, it will overflow a
+ * signed 32-bit word. */
#define UTF8_DISALLOW_FE_FF 0x0800
#define UTF8_WARN_FE_FF 0x1000
* U+10FFFF: \xF4\x8F\xBF\xBF \xF9\xA1\xBF\xBF\xBF max legal Unicode
* U+110000: \xF4\x90\x80\x80 \xF9\xA2\xA0\xA0\xA0
* U+110001: \xF4\x90\x80\x81 \xF9\xA2\xA0\xA0\xA1
- */
+ *
+ * BE AWARE that this test doesn't rule out malformed code points, in
+ * particular overlongs */
#ifdef EBCDIC /* Both versions assume well-formed UTF8 */
# define UTF8_IS_SUPER(s) (NATIVE_UTF8_TO_I8(* (U8*) (s)) >= 0xF9 \
&& (NATIVE_UTF8_TO_I8(* (U8*) (s)) > 0xF9 \
#define UNICODE_IS_SUPER(c) ((c) > PERL_UNICODE_MAX)
#define UNICODE_IS_FE_FF(c) ((c) > 0x7FFFFFFF)
-#ifdef HAS_QUAD
-# define UTF8_QUAD_MAX UINT64_C(0x1000000000)
-#endif
-
#define LATIN_SMALL_LETTER_SHARP_S LATIN_SMALL_LETTER_SHARP_S_NATIVE
#define LATIN_SMALL_LETTER_Y_WITH_DIAERESIS \
LATIN_SMALL_LETTER_Y_WITH_DIAERESIS_NATIVE
((end) > (input) + 1) && \
toFOLD((input)[0]) == 's' && \
toFOLD((input)[1]) == 's')
+
#define SHARP_S_SKIP 2
/* If you want to exclude surrogates, and beyond legal Unicode, see the blame
* log for earlier versions which gave details for these */
+/* A helper macro for isUTF8_CHAR, so use that one, and not this one. This is
+ * retained solely for backwards compatibility and may be deprecated and
+ * removed in a future Perl version.
+ *
+ * regen/regcharclass.pl generates is_UTF8_CHAR_utf8() macros for up to these
+ * number of bytes. So this has to be coordinated with that file */
+#ifdef EBCDIC
+# define IS_UTF8_CHAR_FAST(n) ((n) <= 3)
+#else
+# define IS_UTF8_CHAR_FAST(n) ((n) <= 4)
+#endif
+
#ifndef EBCDIC
-/* This was generated by regen/regcharclass.pl, and then moved here. The lines
- * that generated it were then commented out. This was done solely because it
- * takes on the order of 10 minutes to generate, and is never going to change.
- * The EBCDIC equivalent hasn't been commented out in regcharclass.pl, so it
- * should generate and run the correct stuff */
+/* A helper macro for isUTF8_CHAR, so use that one instead of this. This was
+ * generated by regen/regcharclass.pl, and then moved here. The lines that
+ * generated it were then commented out. This was done solely because it takes
+ * on the order of 10 minutes to generate, and is never going to change, unless
+ * the generated code is improved.
+ *
+ * The EBCDIC versions have been cut to not cover all of legal Unicode, so
+ * don't take too long to generate, and there is a separate one for each code
+ * page, so they are in regcharclass.h instead of here */
/*
- UTF8_CHAR: Matches utf8 from 1 to 4 bytes
+ UTF8_CHAR: Matches legal UTF-8 encoded characters from 2 through 4 bytes
- 0x0 - 0x1FFFFF
+ 0x80 - 0x1FFFFF
*/
/*** GENERATED CODE ***/
-#define is_UTF8_CHAR_utf8_safe(s,e) \
-( ((e)-(s) > 3) ? \
- ( ( ( ((U8*)s)[0] & 0x80 ) == 0x00 ) ? 1 \
- : ( 0xC2 <= ((U8*)s)[0] && ((U8*)s)[0] <= 0xDF ) ? \
- ( ( ( ((U8*)s)[1] & 0xC0 ) == 0x80 ) ? 2 : 0 ) \
- : ( 0xE0 == ((U8*)s)[0] ) ? \
- ( ( ( ( ((U8*)s)[1] & 0xE0 ) == 0xA0 ) && ( ( ((U8*)s)[2] & 0xC0 ) == 0x80 ) ) ? 3 : 0 )\
- : ( 0xE1 <= ((U8*)s)[0] && ((U8*)s)[0] <= 0xEF ) ? \
- ( ( ( ( ((U8*)s)[1] & 0xC0 ) == 0x80 ) && ( ( ((U8*)s)[2] & 0xC0 ) == 0x80 ) ) ? 3 : 0 )\
- : ( 0xF0 == ((U8*)s)[0] ) ? \
- ( ( ( ( 0x90 <= ((U8*)s)[1] && ((U8*)s)[1] <= 0xBF ) && ( ( ((U8*)s)[2] & 0xC0 ) == 0x80 ) ) && ( ( ((U8*)s)[3] & 0xC0 ) == 0x80 ) ) ? 4 : 0 )\
- : ( ( ( ( 0xF1 <= ((U8*)s)[0] && ((U8*)s)[0] <= 0xF7 ) && ( ( ((U8*)s)[1] & 0xC0 ) == 0x80 ) ) && ( ( ((U8*)s)[2] & 0xC0 ) == 0x80 ) ) && ( ( ((U8*)s)[3] & 0xC0 ) == 0x80 ) ) ? 4 : 0 )\
-: ((e)-(s) > 2) ? \
- ( ( ( ((U8*)s)[0] & 0x80 ) == 0x00 ) ? 1 \
- : ( 0xC2 <= ((U8*)s)[0] && ((U8*)s)[0] <= 0xDF ) ? \
- ( ( ( ((U8*)s)[1] & 0xC0 ) == 0x80 ) ? 2 : 0 ) \
- : ( 0xE0 == ((U8*)s)[0] ) ? \
- ( ( ( ( ((U8*)s)[1] & 0xE0 ) == 0xA0 ) && ( ( ((U8*)s)[2] & 0xC0 ) == 0x80 ) ) ? 3 : 0 )\
- : ( ( ( 0xE1 <= ((U8*)s)[0] && ((U8*)s)[0] <= 0xEF ) && ( ( ((U8*)s)[1] & 0xC0 ) == 0x80 ) ) && ( ( ((U8*)s)[2] & 0xC0 ) == 0x80 ) ) ? 3 : 0 )\
-: ((e)-(s) > 1) ? \
- ( ( ( ((U8*)s)[0] & 0x80 ) == 0x00 ) ? 1 \
- : ( ( 0xC2 <= ((U8*)s)[0] && ((U8*)s)[0] <= 0xDF ) && ( ( ((U8*)s)[1] & 0xC0 ) == 0x80 ) ) ? 2 : 0 )\
-: ((e)-(s) > 0) ? \
- ( ( ((U8*)s)[0] & 0x80 ) == 0x00 ) \
-: 0 )
+#define is_UTF8_CHAR_utf8_no_length_checks(s) \
+( ( 0xC2 <= ((U8*)s)[0] && ((U8*)s)[0] <= 0xDF ) ? \
+ ( ( ( ((U8*)s)[1] & 0xC0 ) == 0x80 ) ? 2 : 0 ) \
+: ( 0xE0 == ((U8*)s)[0] ) ? \
+ ( ( ( ( ((U8*)s)[1] & 0xE0 ) == 0xA0 ) && ( ( ((U8*)s)[2] & 0xC0 ) == 0x80 ) ) ? 3 : 0 )\
+: ( 0xE1 <= ((U8*)s)[0] && ((U8*)s)[0] <= 0xEF ) ? \
+ ( ( ( ( ((U8*)s)[1] & 0xC0 ) == 0x80 ) && ( ( ((U8*)s)[2] & 0xC0 ) == 0x80 ) ) ? 3 : 0 )\
+: ( 0xF0 == ((U8*)s)[0] ) ? \
+ ( ( ( ( 0x90 <= ((U8*)s)[1] && ((U8*)s)[1] <= 0xBF ) && ( ( ((U8*)s)[2] & 0xC0 ) == 0x80 ) ) && ( ( ((U8*)s)[3] & 0xC0 ) == 0x80 ) ) ? 4 : 0 )\
+: ( ( ( ( 0xF1 <= ((U8*)s)[0] && ((U8*)s)[0] <= 0xF7 ) && ( ( ((U8*)s)[1] & 0xC0 ) == 0x80 ) ) && ( ( ((U8*)s)[2] & 0xC0 ) == 0x80 ) ) && ( ( ((U8*)s)[3] & 0xC0 ) == 0x80 ) ) ? 4 : 0 )
#endif
-/* IS_UTF8_CHAR(p) is strictly speaking wrong (not UTF-8) because it
- * (1) allows UTF-8 encoded UTF-16 surrogates
- * (2) it allows code points past U+10FFFF.
- * The Perl_is_utf8_char() full "slow" code will handle the Perl
- * "extended UTF-8". */
-#define IS_UTF8_CHAR(p, n) (is_UTF8_CHAR_utf8_safe(p, (p) + (n)) == n)
+/*
+=head1 Unicode Support
-/* regen/regcharclass.pl generates is_UTF8_CHAR_utf8_safe() macros for up to
- * these number of bytes. So this has to be coordinated with it */
-#ifdef EBCDIC
-# define IS_UTF8_CHAR_FAST(n) ((n) <= 5)
-#else
-# define IS_UTF8_CHAR_FAST(n) ((n) <= 4)
-#endif
+=for apidoc Am|STRLEN|isUTF8_CHAR|const U8 *s|const U8 *e
+
+Returns the number of bytes beginning at C<s> which form a legal UTF-8 (or
+UTF-EBCDIC) encoded character, looking no further than C<e - s> bytes into
+C<s>. Returns 0 if the sequence starting at C<s> through C<e - 1> is not
+well-formed UTF-8
+
+Note that an INVARIANT character (i.e. ASCII on non-EBCDIC
+machines) is a valid UTF-8 character.
+
+=cut
+*/
+
+#define isUTF8_CHAR(s, e) (UNLIKELY((e) <= (s)) \
+ ? 0 \
+ : (UTF8_IS_INVARIANT(*s)) \
+ ? 1 \
+ : UNLIKELY(((e) - (s)) < UTF8SKIP(s)) \
+ ? 0 \
+ : LIKELY(IS_UTF8_CHAR_FAST(UTF8SKIP(s))) \
+ ? is_UTF8_CHAR_utf8_no_length_checks(s) \
+ : _is_utf8_char_slow(s, e))
+
+#define is_utf8_char_buf(buf, buf_end) isUTF8_CHAR(buf, buf_end)
+
+/* Do not use; should be deprecated. Use isUTF8_CHAR() instead; this is
+ * retained solely for backwards compatibility */
+#define IS_UTF8_CHAR(p, n) (isUTF8_CHAR(p, (p) + (n)) == n)
#endif /* H_UTF8 */
https://perl5.git.perl.org / perl5.git / blobdiff