# endif
#endif
-/* This logic needs to come after reading config.h, but before including
- proto.h */
-#ifdef IAMSUID
-# ifndef DOSUID
-# define DOSUID
-# endif
-#endif
-
-#ifdef SETUID_SCRIPTS_ARE_SECURE_NOW
-# ifdef DOSUID
-# undef DOSUID
-# endif
-# ifdef IAMSUID
-# undef IAMSUID
-# define SETUID_SCRIPTS_ARE_SECURE_NOW_AND_IAMSUID
-# endif
-#endif
-
/* See L<perlguts/"The Perl API"> for detailed notes on
* PERL_IMPLICIT_CONTEXT and PERL_IMPLICIT_SYS */
# endif
#endif
+#undef START_EXTERN_C
+#undef END_EXTERN_C
+#undef EXTERN_C
+#ifdef __cplusplus
+# define START_EXTERN_C extern "C" {
+# define END_EXTERN_C }
+# define EXTERN_C extern "C"
+#else
+# define START_EXTERN_C
+# define END_EXTERN_C
+# define EXTERN_C extern
+#endif
+
#ifdef PERL_GLOBAL_STRUCT
# ifndef PERL_GET_VARS
# ifdef PERL_GLOBAL_STRUCT_PRIVATE
- extern struct perl_vars* Perl_GetVarsPrivate();
+ EXTERN_C struct perl_vars* Perl_GetVarsPrivate();
# define PERL_GET_VARS() Perl_GetVarsPrivate() /* see miniperlmain.c */
# ifndef PERLIO_FUNCS_CONST
# define PERLIO_FUNCS_CONST /* Can't have these lying around. */
# endif
#endif
-#undef START_EXTERN_C
-#undef END_EXTERN_C
-#undef EXTERN_C
-#ifdef __cplusplus
-# define START_EXTERN_C extern "C" {
-# define END_EXTERN_C }
-# define EXTERN_C extern "C"
-#else
-# define START_EXTERN_C
-# define END_EXTERN_C
-# define EXTERN_C extern
-#endif
-
/* Some platforms require marking function declarations
* for them to be exportable. Used in perlio.h, proto.h
* is handled either by the makedef.pl or by defining the
# include <unistd.h>
#endif
+/* for WCOREDUMP */
+#ifdef I_SYS_WAIT
+# include <sys/wait.h>
+#endif
+
#ifdef __SYMBIAN32__
# undef _SC_ARG_MAX /* Symbian has _SC_ARG_MAX but no sysconf() */
#endif
set_errno(errcode); \
set_vaxc_errno(vmserrcode); \
} STMT_END
+# define dSAVEDERRNO int saved_errno; unsigned saved_vms_errno
+# define dSAVE_ERRNO int saved_errno = errno; unsigned saved_vms_errno = vaxc$errno
+# define SAVE_ERRNO ( saved_errno = errno, saved_vms_errno = vaxc$errno )
+# define RESTORE_ERRNO SETERRNO(saved_errno, saved_vms_errno)
+
# define LIB_INVARG LIB$_INVARG
# define RMS_DIR RMS$_DIR
# define RMS_FAC RMS$_FAC
# define SS_NORMAL SS$_NORMAL
#else
# define SETERRNO(errcode,vmserrcode) (errno = (errcode))
+# define dSAVEDERRNO int saved_errno
+# define dSAVE_ERRNO int saved_errno = errno
+# define SAVE_ERRNO (saved_errno = errno)
+# define RESTORE_ERRNO (errno = saved_errno)
+
# define LIB_INVARG 0
# define RMS_DIR 0
# define RMS_FAC 0
#ifndef PERL_MICRO
#if defined __GNUC__ && !defined(__INTEL_COMPILER)
+# if __GNUC__ == 3 && __GNUC_MINOR__ >= 1 || __GNUC__ > 3 /* 3.1 -> */
+# define HASATTRIBUTE_DEPRECATED
+# endif
# if __GNUC__ >= 3 /* 3.0 -> */ /* XXX Verify this version */
# define HASATTRIBUTE_FORMAT
# if defined __MINGW32__
} STMT_END
/* STATUS_UNIX_EXIT_SET - Takes a UNIX/POSIX exit code and sets
- * the NATIVE error status based on it. It does not assume that
- * the UNIX/POSIX exit codes have any relationship to errno, except
- * that 0 indicates a success. When in the default mode to comply
- * with the Perl VMS documentation, any other code sets the NATIVE
- * status to a failure code of SS$_ABORT.
+ * the NATIVE error status based on it.
+ *
+ * When in the default mode to comply with the Perl VMS documentation,
+ * 0 is a success and any other code sets the NATIVE status to a failure
+ * code of SS$_ABORT.
*
* In the new POSIX EXIT mode, native status will be set so that the
* actual exit code will can be retrieved by the calling program or
STMT_START { \
I32 evalue = (I32)n; \
PL_statusvalue = evalue; \
- if (evalue != -1) { \
- if (evalue <= 0xFF00) { \
- if (evalue > 0xFF) \
- evalue = (evalue >> child_offset_bits) & 0xFF; \
- if (evalue == 0) \
- PL_statusvalue_vms == SS$_NORMAL; \
- else \
- if (MY_POSIX_EXIT) \
- PL_statusvalue_vms = \
- (C_FAC_POSIX | (evalue << 3 ) | \
- ((evalue == 1) ? (STS$K_ERROR | STS$M_INHIB_MSG) : 1)); \
- else \
- PL_statusvalue_vms = SS$_ABORT; \
- } else { /* forgive them Perl, for they have sinned */ \
- if (evalue != EVMSERR) PL_statusvalue_vms = evalue; \
- else PL_statusvalue_vms = vaxc$errno; \
- /* And obviously used a VMS status value instead of UNIX */ \
- PL_statusvalue = EVMSERR; \
- } \
- } \
- else PL_statusvalue_vms = SS$_ABORT; \
- set_vaxc_errno(PL_statusvalue_vms); \
+ if (MY_POSIX_EXIT) { \
+ if (evalue <= 0xFF00) { \
+ if (evalue > 0xFF) \
+ evalue = (evalue >> child_offset_bits) & 0xFF; \
+ PL_statusvalue_vms = \
+ (C_FAC_POSIX | (evalue << 3 ) | \
+ ((evalue == 1) ? (STS$K_ERROR | STS$M_INHIB_MSG) : 1)); \
+ } else /* forgive them Perl, for they have sinned */ \
+ PL_statusvalue_vms = evalue; \
+ } else { \
+ if (evalue == 0) \
+ PL_statusvalue_vms = SS$_NORMAL; \
+ else if (evalue <= 0xFF00) \
+ PL_statusvalue_vms = SS$_ABORT; \
+ else { /* forgive them Perl, for they have sinned */ \
+ if (evalue != EVMSERR) PL_statusvalue_vms = evalue; \
+ else PL_statusvalue_vms = vaxc$errno; \
+ /* And obviously used a VMS status value instead of UNIX */ \
+ PL_statusvalue = EVMSERR; \
+ } \
+ set_vaxc_errno(PL_statusvalue_vms); \
+ } \
} STMT_END
+
/* STATUS_EXIT_SET - Takes a NATIVE/UNIX/POSIX exit code
* and sets the NATIVE error status based on it. This special case
* is needed to maintain compatibility with past VMS behavior.
# endif
#endif
+#ifdef HASATTRIBUTE_DEPRECATED
+# define __attribute__deprecated__ __attribute__((deprecated))
+#endif
#ifdef HASATTRIBUTE_FORMAT
# define __attribute__format__(x,y,z) __attribute__((format(x,y,z)))
#endif
#endif
/* If we haven't defined the attributes yet, define them to blank. */
+#ifndef __attribute__deprecated__
+# define __attribute__deprecated__
+#endif
#ifndef __attribute__format__
# define __attribute__format__(x,y,z)
#endif
#define HINT_FILETEST_ACCESS 0x00400000 /* filetest pragma */
#define HINT_UTF8 0x00800000 /* utf8 pragma */
+#define HINT_NO_AMAGIC 0x01000000 /* overloading pragma */
+
/* The following are stored in $^H{sort}, not in PL_hints */
#define HINT_SORT_SORT_BITS 0x000000FF /* allow 256 different ones */
#define HINT_SORT_QUICKSORT 0x00000001
#define PERLDBf_NAMEANON 0x200 /* Informative names for anon subs */
#define PERLDBf_SAVESRC 0x400 /* Save source lines into @{"_<$filename"} */
#define PERLDBf_SAVESRC_NOSUBS 0x800 /* Including evals that generate no subrouties */
-#if 0 /* Not yet working. */
#define PERLDBf_SAVESRC_INVALID 0x1000 /* Save source that did not compile */
-#endif
#define PERLDB_SUB (PL_perldb && (PL_perldb & PERLDBf_SUB))
#define PERLDB_LINE (PL_perldb && (PL_perldb & PERLDBf_LINE))
#define PERLDB_NAMEANON (PL_perldb && (PL_perldb & PERLDBf_NAMEANON))
#define PERLDB_SAVESRC (PL_perldb && (PL_perldb & PERLDBf_SAVESRC))
#define PERLDB_SAVESRC_NOSUBS (PL_perldb && (PL_perldb & PERLDBf_SAVESRC_NOSUBS))
-#if 0 /* Not yet working. */
#define PERLDB_SAVESRC_INVALID (PL_perldb && (PL_perldb & PERLDBf_SAVESRC_INVALID))
-#endif
#ifdef USE_LOCALE_NUMERIC
# endif
#endif
-#ifdef IAMSUID
-
-#ifdef I_SYS_STATVFS
-# if defined(PERL_SCO) && !defined(_SVID3)
-# define _SVID3
-# endif
-# include <sys/statvfs.h> /* for f?statvfs() */
-#endif
-#ifdef I_SYS_MOUNT
-# include <sys/mount.h> /* for *BSD f?statfs() */
-#endif
-#ifdef I_MNTENT
-# include <mntent.h> /* for getmntent() */
-#endif
-#ifdef I_SYS_STATFS
-# include <sys/statfs.h> /* for some statfs() */
-#endif
-#ifdef I_SYS_VFS
-# ifdef __sgi
-# define sv IRIX_sv /* kludge: IRIX has an sv of its own */
-# endif
-# include <sys/vfs.h> /* for some statfs() */
-# ifdef __sgi
-# undef IRIX_sv
-# endif
-#endif
-#ifdef I_USTAT
-# include <ustat.h> /* for ustat() */
-#endif
-
-#if !defined(PERL_MOUNT_NOSUID) && defined(MOUNT_NOSUID)
-# define PERL_MOUNT_NOSUID MOUNT_NOSUID
-#endif
-#if !defined(PERL_MOUNT_NOSUID) && defined(MNT_NOSUID)
-# define PERL_MOUNT_NOSUID MNT_NOSUID
-#endif
-#if !defined(PERL_MOUNT_NOSUID) && defined(MS_NOSUID)
-# define PERL_MOUNT_NOSUID MS_NOSUID
-#endif
-#if !defined(PERL_MOUNT_NOSUID) && defined(M_NOSUID)
-# define PERL_MOUNT_NOSUID M_NOSUID
-#endif
-
-#if !defined(PERL_MOUNT_NOEXEC) && defined(MOUNT_NOEXEC)
-# define PERL_MOUNT_NOEXEC MOUNT_NOEXEC
-#endif
-#if !defined(PERL_MOUNT_NOEXEC) && defined(MNT_NOEXEC)
-# define PERL_MOUNT_NOEXEC MNT_NOEXEC
-#endif
-#if !defined(PERL_MOUNT_NOEXEC) && defined(MS_NOEXEC)
-# define PERL_MOUNT_NOEXEC MS_NOEXEC
-#endif
-#if !defined(PERL_MOUNT_NOEXEC) && defined(M_NOEXEC)
-# define PERL_MOUNT_NOEXEC M_NOEXEC
-#endif
-
-#endif /* IAMSUID */
-
#ifdef I_LIBUTIL
# include <libutil.h> /* setproctitle() in some FreeBSDs */
#endif
https://perl5.git.perl.org / perl5.git / blobdiff