+#!/bin/sh
+#
+# THIS IS A GENERATED FILE
+# DO NOT HAND-EDIT
+#
+# See Porting/config_h.pl
+
+: Set up for generating config_h.SH
case "$CONFIG_SH" in
-'') CONFIG_SH=config.sh ;;
+'') CONFIG_SH=config.sh;;
esac
case "$CONFIG_H" in
-'') CONFIG_H=config.h ;;
+'') CONFIG_H=config.h;;
esac
case $PERL_CONFIG_SH in
'')
case "$0" in
*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac
+case "$CONFIG_H" in
+already-done) echo "Not re-extracting config.h" ;;
+*)
echo "Extracting $CONFIG_H (with variable substitutions)"
sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-def!#undef!'
-/*
- * This file was produced by running the config_h.SH script, which
+/* This file was produced by running the config_h.SH script, which
* gets its values from $CONFIG_SH, which is generally produced by
* running Configure.
*
* Feel free to modify any of this as the need arises. Note, however,
* that running config_h.SH again will wipe out any changes you've made.
* For a more permanent change edit $CONFIG_SH and rerun config_h.SH.
- *
- * \$Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
*/
-/*
- * Package name : $package
+/* Package name : $package
* Source directory : $src
* Configuration time: $cf_time
* Configured by : $cf_by
*/
#$d_chsize HAS_CHSIZE /**/
-/* HASCONST:
- * This symbol, if defined, indicates that this C compiler knows about
- * the const type. There is no need to actually test for that symbol
- * within your programs. The mere use of the "const" keyword will
- * trigger the necessary tests.
+/* HAS_CRYPT:
+ * This symbol, if defined, indicates that the crypt routine is available
+ * to encrypt passwords and the like.
*/
-#$d_const HASCONST /**/
-#ifndef HASCONST
-#define const
-#endif
+#$d_crypt HAS_CRYPT /**/
+
+/* HAS_CTERMID:
+ * This symbol, if defined, indicates that the ctermid routine is
+ * available to generate filename for terminal.
+ */
+#$d_ctermid HAS_CTERMID /**/
/* HAS_CUSERID:
* This symbol, if defined, indicates that the cuserid routine is
* of significant digits in a double precision number. If this
* symbol is not defined, a guess of 15 is usually pretty good.
*/
-#$d_dbl_dig HAS_DBL_DIG /* */
+#$d_dbl_dig HAS_DBL_DIG /**/
/* HAS_DIFFTIME:
* This symbol, if defined, indicates that the difftime routine is
/* HAS_POLL:
* This symbol, if defined, indicates that the poll routine is
- * available to poll active file descriptors. You may safely
- * include <poll.h> when this symbol is defined.
+ * available to poll active file descriptors. Please check I_POLL and
+ * I_SYS_POLL to know which header should be included as well.
*/
#$d_poll HAS_POLL /**/
*/
#$d_seteuid HAS_SETEUID /**/
+/* HAS_SETGROUPS:
+ * This symbol, if defined, indicates that the setgroups() routine is
+ * available to set the list of process groups. If unavailable, multiple
+ * groups are probably not supported.
+ */
+#$d_setgrps HAS_SETGROUPS /**/
+
/* HAS_SETLINEBUF:
* This symbol, if defined, indicates that the setlinebuf routine is
* available to change stderr or stdout from block-buffered or unbuffered
*/
#$d_strcoll HAS_STRCOLL /**/
-/* USE_STRUCT_COPY:
- * This symbol, if defined, indicates that this C compiler knows how
- * to copy structures. If undefined, you'll need to use a block copy
- * routine of some sort instead.
- */
-#$d_strctcpy USE_STRUCT_COPY /**/
-
/* HAS_STRTOD:
* This symbol, if defined, indicates that the strtod routine is
* available to provide better numeric string conversion than atof().
*/
#$d_usleep HAS_USLEEP /**/
-/* HASVOLATILE:
- * This symbol, if defined, indicates that this C compiler knows about
- * the volatile declaration.
- */
-#$d_volatile HASVOLATILE /**/
-#ifndef HASVOLATILE
-#define volatile
-#endif
-
/* HAS_WAIT4:
* This symbol, if defined, indicates that wait4() exists.
*/
*/
#$d_wctomb HAS_WCTOMB /**/
+/* Groups_t:
+ * This symbol holds the type used for the second argument to
+ * getgroups() and setgroups(). Usually, this is the same as
+ * gidtype (gid_t) , but sometimes it isn't.
+ * It can be int, ushort, gid_t, etc...
+ * It may be necessary to include <sys/types.h> to get any
+ * typedef'ed information. This is only required if you have
+ * getgroups() or setgroups()..
+ */
+#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
+#define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */
+#endif
+
/* I_ARPA_INET:
* This symbol, if defined, indicates to the C program that it should
* include <arpa/inet.h> to get inet_addr and friends declarations.
#$i_dbm I_DBM /**/
#$i_rpcsvcdbm I_RPCSVC_DBM /**/
-/* I_DIRENT:
- * This symbol, if defined, indicates to the C program that it should
- * include <dirent.h>. Using this symbol also triggers the definition
- * of the Direntry_t define which ends up being 'struct dirent' or
- * 'struct direct' depending on the availability of <dirent.h>.
- */
-/* DIRNAMLEN:
- * This symbol, if defined, indicates to the C program that the length
- * of directory entry names is provided by a d_namlen field. Otherwise
- * you need to do strlen() on the d_name field.
- */
-/* Direntry_t:
- * This symbol is set to 'struct direct' or 'struct dirent' depending on
- * whether dirent is available or not. You should use this pseudo type to
- * portably declare your directory entries.
- */
-#$i_dirent I_DIRENT /**/
-#$d_dirnamlen DIRNAMLEN /**/
-#define Direntry_t $direntrytype
-
/* I_DLFCN:
* This symbol, if defined, indicates that <dlfcn.h> exists and should
* be included.
*/
#$i_float I_FLOAT /**/
+/* I_GDBM:
+ * This symbol, if defined, indicates that <gdbm.h> exists and should
+ * be included.
+ */
+#$i_gdbm I_GDBM /**/
+
/* I_LIMITS:
* This symbol, if defined, indicates to the C program that it should
* include <limits.h> to get definition of symbols like WORD_BIT or
*/
#$i_memory I_MEMORY /**/
-/* I_NET_ERRNO:
- * This symbol, if defined, indicates that <net/errno.h> exists and
- * should be included.
- */
-#$i_neterrno I_NET_ERRNO /**/
-
/* I_NETINET_IN:
* This symbol, if defined, indicates to the C program that it should
* include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
*/
#$i_sysparam I_SYS_PARAM /**/
+/* I_SYS_POLL:
+ * This symbol, if defined, indicates that the program may include
+ * <sys/poll.h>. When I_POLL is also defined, it's probably safest
+ * to only include <poll.h>.
+ */
+#$i_syspoll I_SYS_POLL /**/
+
/* I_SYS_RESOURCE:
* This symbol, if defined, indicates to the C program that it should
* include <sys/resource.h>.
*/
#$i_vfork I_VFORK /**/
-/* INTSIZE:
- * This symbol contains the value of sizeof(int) so that the C
- * preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- * This symbol contains the value of sizeof(long) so that the C
- * preprocessor can make decisions based on it.
- */
-/* SHORTSIZE:
- * This symbol contains the value of sizeof(short) so that the C
- * preprocessor can make decisions based on it.
- */
-#define INTSIZE $intsize /**/
-#define LONGSIZE $longsize /**/
-#define SHORTSIZE $shortsize /**/
-
-/* MULTIARCH:
- * This symbol, if defined, signifies that the build
- * process will produce some binary files that are going to be
- * used in a cross-platform environment. This is the case for
- * example with the NeXT "fat" binaries that contain executables
- * for several CPUs.
+/* CAN_VAPROTO:
+ * This variable is defined on systems supporting prototype declaration
+ * of functions with a variable number of arguments.
*/
-#$multiarch MULTIARCH /**/
-
-/* HAS_QUAD:
- * This symbol, if defined, tells that there's a 64-bit integer type,
- * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
- * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
+/* _V:
+ * This macro is used to declare function parameters in prototypes for
+ * functions with a variable number of parameters. Use double parentheses.
+ * For example:
+ *
+ * int printf _V((char *fmt, ...));
+ *
+ * Remember to use the plain simple _() macro when declaring a function
+ * with no variable number of arguments, since it might be possible to
+ * have a non-effect _V() macro and still get prototypes via _().
*/
-#$d_quad HAS_QUAD /**/
-#ifdef HAS_QUAD
-# define Quad_t $quadtype /**/
-# define Uquad_t $uquadtype /**/
-# define QUADKIND $quadkind /**/
-# define QUAD_IS_INT 1
-# define QUAD_IS_LONG 2
-# define QUAD_IS_LONG_LONG 3
-# define QUAD_IS_INT64_T 4
+#$vaproto CAN_VAPROTO /**/
+#ifdef CAN_VAPROTO
+#define _V(args) args
+#else
+#define _V(args) ()
#endif
-/* HAS_ACCESSX:
- * This symbol, if defined, indicates that the accessx routine is
- * available to do extended access checks.
- */
-#$d_accessx HAS_ACCESSX /**/
-
-/* HAS_EACCESS:
- * This symbol, if defined, indicates that the eaccess routine is
- * available to do extended access checks.
- */
-#$d_eaccess HAS_EACCESS /**/
-
-/* I_SYS_ACCESS:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/access.h>.
- */
-#$i_sysaccess I_SYS_ACCESS /**/
-
-/* I_SYS_SECURITY:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/security.h>.
- */
-#$i_syssecrt I_SYS_SECURITY /**/
-
/* OSNAME:
* This symbol contains the name of the operating system, as determined
* by Configure. You shouldn't rely on it too much; the specific
#define OSNAME "$osname" /**/
#define OSVERS "$osvers" /**/
+/* USE_CROSS_COMPILE:
+ * This symbol, if defined, indicates that Perl is being cross-compiled.
+ */
+/* PERL_TARGETARCH:
+ * This symbol, if defined, indicates the target architecture
+ * Perl has been cross-compiled to. Undefined if not a cross-compile.
+ */
+#ifndef USE_CROSS_COMPILE
+#$usecrosscompile USE_CROSS_COMPILE /**/
+#define PERL_TARGETARCH "$targetarch" /**/
+#endif
+
+/* MULTIARCH:
+ * This symbol, if defined, signifies that the build
+ * process will produce some binary files that are going to be
+ * used in a cross-platform environment. This is the case for
+ * example with the NeXT "fat" binaries that contain executables
+ * for several CPUs.
+ */
+#$multiarch MULTIARCH /**/
+
/* MEM_ALIGNBYTES:
* This symbol contains the number of bytes required to align a
* double, or a long double when applicable. Usual values are 2,
- * 4 and 8. The default is eight, for safety.
+ * 4 and 8. The default is eight, for safety. For cross-compiling
+ * or multiarch support, Configure will set a minimum of 8.
*/
-#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
-# define MEM_ALIGNBYTES 8
-#else
#define MEM_ALIGNBYTES $alignbytes
-#endif
-
-/* PERL_RELOCATABLE_INC:
- * This symbol, if defined, indicates that we'd like to relocate entries
- * in @INC at run time based on the location of the perl binary.
- */
-#$userelocatableinc PERL_RELOCATABLE_INC /**/
/* ARCHLIB:
* This variable, if defined, holds the name of the directory in
*/
#define ARCHNAME "$archname" /**/
-/* HAS_ATOLF:
- * This symbol, if defined, indicates that the atolf routine is
- * available to convert strings into long doubles.
- */
-#$d_atolf HAS_ATOLF /**/
-
-/* HAS_ATOLL:
- * This symbol, if defined, indicates that the atoll routine is
- * available to convert strings into long longs.
- */
-#$d_atoll HAS_ATOLL /**/
-
/* BIN:
* This symbol holds the path of the bin directory where the package will
* be installed. Program must be prepared to deal with ~name substitution.
* This symbol is the filename expanded version of the BIN symbol, for
* programs that do not want to deal with that at run-time.
*/
+/* PERL_RELOCATABLE_INC:
+ * This symbol, if defined, indicates that we'd like to relocate entries
+ * in @INC at run time based on the location of the perl binary.
+ */
#define BIN "$bin" /**/
#define BIN_EXP "$binexp" /**/
+#define PERL_RELOCATABLE_INC "$userelocatableinc" /**/
+
+/* INTSIZE:
+ * This symbol contains the value of sizeof(int) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* LONGSIZE:
+ * This symbol contains the value of sizeof(long) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* SHORTSIZE:
+ * This symbol contains the value of sizeof(short) so that the C
+ * preprocessor can make decisions based on it.
+ */
+#define INTSIZE $intsize /**/
+#define LONGSIZE $longsize /**/
+#define SHORTSIZE $shortsize /**/
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
* in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
* If the compiler supports cross-compiling or multiple-architecture
- * binaries (eg. on NeXT systems), use compiler-defined macros to
+ * binaries (e.g. on NeXT systems), use compiler-defined macros to
* determine the byte order.
* On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
* Binaries (MAB) on either big endian or little endian machines.
* The endian-ness is available at compile-time. This only matters
- * for perl, where the config.h can be generated and installed on
+ * for perl, where the config.h can be generated and installed on
* one system, and used by a different architecture to build an
* extension. Older versions of NeXT that might not have
* defined either *_ENDIAN__ were all on Motorola 680x0 series,
- * so the default case (for NeXT) is big endian to catch them.
+ * so the default case (for NeXT) is big endian to catch them.
* This might matter for NeXT 3.0.
*/
#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
#define BYTEORDER 0x$byteorder /* large digits for MSB */
#endif /* NeXT */
+/* CHARBITS:
+ * This symbol contains the size of a char, so that the C preprocessor
+ * can make decisions based on it.
+ */
+#define CHARBITS $charbits /**/
+
/* CAT2:
* This macro concatenates 2 tokens together.
*/
#if $cpp_stuff == 1
#define CAT2(a,b) a/**/b
#define STRINGIFY(a) "a"
- /* If you can get stringification with catify, tell me how! */
#endif
#if $cpp_stuff == 42
-#define PeRl_CaTiFy(a, b) a ## b
+#define PeRl_CaTiFy(a, b) a ## b
#define PeRl_StGiFy(a) #a
-/* the additional level of indirection enables these macros to be
- * used as arguments to other macros. See K&R 2nd ed., page 231. */
#define CAT2(a,b) PeRl_CaTiFy(a,b)
#define StGiFy(a) PeRl_StGiFy(a)
#define STRINGIFY(a) PeRl_StGiFy(a)
#endif
#if $cpp_stuff != 1 && $cpp_stuff != 42
-# include "Bletch: How does this C preprocessor concatenate tokens?"
+#include "Bletch: How does this C preprocessor concatenate tokens?"
#endif
/* CPPSTDIN:
#define CPPRUN "$cpprun"
#define CPPLAST "$cpplast"
-/* HAS__FWALK:
- * This symbol, if defined, indicates that the _fwalk system call is
- * available to apply a function to all the file handles.
- */
-#$d__fwalk HAS__FWALK /**/
-
/* HAS_ACCESS:
* This manifest constant lets the C program know that the access()
* system call is available to check for accessibility using real UID/GID.
*/
#$d_access HAS_ACCESS /**/
+/* HAS_ACCESSX:
+ * This symbol, if defined, indicates that the accessx routine is
+ * available to do extended access checks.
+ */
+#$d_accessx HAS_ACCESSX /**/
+
/* HAS_ASCTIME_R:
* This symbol, if defined, indicates that the asctime_r routine
* is available to asctime re-entrantly.
#$d_asctime_r HAS_ASCTIME_R /**/
#define ASCTIME_R_PROTO $asctime_r_proto /**/
+/* HASATTRIBUTE_FORMAT:
+ * Can we handle GCC attribute for checking printf-style formats
+ */
+/* PRINTF_FORMAT_NULL_OK:
+ * Allows __printf__ format to be null when checking printf-style
+ */
+/* HASATTRIBUTE_MALLOC:
+ * Can we handle GCC attribute for malloc-style functions.
+ */
+/* HASATTRIBUTE_NONNULL:
+ * Can we handle GCC attribute for nonnull function parms.
+ */
+/* HASATTRIBUTE_NORETURN:
+ * Can we handle GCC attribute for functions that do not return
+ */
+/* HASATTRIBUTE_PURE:
+ * Can we handle GCC attribute for pure functions
+ */
+/* HASATTRIBUTE_UNUSED:
+ * Can we handle GCC attribute for unused variables and arguments
+ */
+/* HASATTRIBUTE_DEPRECATED:
+ * Can we handle GCC attribute for marking deprecated APIs
+ */
+/* HASATTRIBUTE_WARN_UNUSED_RESULT:
+ * Can we handle GCC attribute for warning on unused results
+ */
+#$d_attribute_deprecated HASATTRIBUTE_DEPRECATED /**/
+#$d_attribute_format HASATTRIBUTE_FORMAT /**/
+#$d_printf_format_null PRINTF_FORMAT_NULL_OK /**/
+#$d_attribute_noreturn HASATTRIBUTE_NORETURN /**/
+#$d_attribute_malloc HASATTRIBUTE_MALLOC /**/
+#$d_attribute_nonnull HASATTRIBUTE_NONNULL /**/
+#$d_attribute_pure HASATTRIBUTE_PURE /**/
+#$d_attribute_unused HASATTRIBUTE_UNUSED /**/
+#$d_attribute_warn_unused_result HASATTRIBUTE_WARN_UNUSED_RESULT /**/
+
/* CASTI32:
* This symbol is defined if the C compiler can cast negative
* or large floating point numbers to 32-bit ints.
#$d_castneg CASTNEGFLOAT /**/
#define CASTFLAGS $castflags /**/
-/* HAS_CLASS:
- * This symbol, if defined, indicates that the class routine is
- * available to classify doubles. Available for example in AIX.
- * The returned values are defined in <float.h> and are:
- *
- * FP_PLUS_NORM Positive normalized, nonzero
- * FP_MINUS_NORM Negative normalized, nonzero
- * FP_PLUS_DENORM Positive denormalized, nonzero
- * FP_MINUS_DENORM Negative denormalized, nonzero
- * FP_PLUS_ZERO +0.0
- * FP_MINUS_ZERO -0.0
- * FP_PLUS_INF +INF
- * FP_MINUS_INF -INF
- * FP_NANS Signaling Not a Number (NaNS)
- * FP_NANQ Quiet Not a Number (NaNQ)
- */
-#$d_class HAS_CLASS /**/
-
/* VOID_CLOSEDIR:
* This symbol, if defined, indicates that the closedir() routine
* does not return a value.
*/
#$d_void_closedir VOID_CLOSEDIR /**/
-/* HAS_STRUCT_CMSGHDR:
- * This symbol, if defined, indicates that the struct cmsghdr
- * is supported.
- */
-#$d_cmsghdr_s HAS_STRUCT_CMSGHDR /**/
-
-/* HAS_CRYPT_R:
+/* HASCONST:
+ * This symbol, if defined, indicates that this C compiler knows about
+ * the const type. There is no need to actually test for that symbol
+ * within your programs. The mere use of the "const" keyword will
+ * trigger the necessary tests.
+ */
+#$d_const HASCONST /**/
+#ifndef HASCONST
+#define const
+#endif
+
+/* HAS_CRYPT_R:
* This symbol, if defined, indicates that the crypt_r routine
* is available to crypt re-entrantly.
*/
#define CSH "$full_csh" /**/
#endif
+/* HAS_CTERMID_R:
+ * This symbol, if defined, indicates that the ctermid_r routine
+ * is available to ctermid re-entrantly.
+ */
+/* CTERMID_R_PROTO:
+ * This symbol encodes the prototype of ctermid_r.
+ * It is zero if d_ctermid_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctermid_r
+ * is defined.
+ */
+#$d_ctermid_r HAS_CTERMID_R /**/
+#define CTERMID_R_PROTO $ctermid_r_proto /**/
+
/* HAS_CTIME_R:
* This symbol, if defined, indicates that the ctime_r routine
* is available to ctime re-entrantly.
#$d_ctime_r HAS_CTIME_R /**/
#define CTIME_R_PROTO $ctime_r_proto /**/
-/* DLSYM_NEEDS_UNDERSCORE:
- * This symbol, if defined, indicates that we need to prepend an
- * underscore to the symbol name before calling dlsym(). This only
- * makes sense if you *have* dlsym, which we will presume is the
- * case if you're using dl_dlopen.xs.
+/* SETUID_SCRIPTS_ARE_SECURE_NOW:
+ * This symbol, if defined, indicates that the bug that prevents
+ * setuid scripts from being secure is not present in this kernel.
*/
-#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/
+/* DOSUID:
+ * This symbol, if defined, indicates that the C program should
+ * check the script that it is executing for setuid/setgid bits, and
+ * attempt to emulate setuid/setgid on systems that have disabled
+ * setuid #! scripts because the kernel can't do it securely.
+ * It is up to the package designer to make sure that this emulation
+ * is done securely. Among other things, it should do an fstat on
+ * the script it just opened to make sure it really is a setuid/setgid
+ * script, it should make sure the arguments passed correspond exactly
+ * to the argument on the #! line, and it should not trust any
+ * subprocesses to which it must pass the filename rather than the
+ * file descriptor of the script to be executed.
+ */
+#$d_suidsafe SETUID_SCRIPTS_ARE_SECURE_NOW /**/
+#$d_dosuid DOSUID /**/
/* HAS_DRAND48_R:
* This symbol, if defined, indicates that the drand48_r routine
*/
#$d_drand48proto HAS_DRAND48_PROTO /**/
+/* HAS_EACCESS:
+ * This symbol, if defined, indicates that the eaccess routine is
+ * available to do extended access checks.
+ */
+#$d_eaccess HAS_EACCESS /**/
+
/* HAS_ENDGRENT:
* This symbol, if defined, indicates that the getgrent routine is
* available for finalizing sequential access of the group database.
*/
#$d_endhent HAS_ENDHOSTENT /**/
+/* HAS_ENDHOSTENT_R:
+ * This symbol, if defined, indicates that the endhostent_r routine
+ * is available to endhostent re-entrantly.
+ */
+/* ENDHOSTENT_R_PROTO:
+ * This symbol encodes the prototype of endhostent_r.
+ * It is zero if d_endhostent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endhostent_r
+ * is defined.
+ */
+#$d_endhostent_r HAS_ENDHOSTENT_R /**/
+#define ENDHOSTENT_R_PROTO $endhostent_r_proto /**/
+
/* HAS_ENDNETENT:
* This symbol, if defined, indicates that the endnetent() routine is
* available to close whatever was being used for network queries.
*/
#$d_endnent HAS_ENDNETENT /**/
+/* HAS_ENDNETENT_R:
+ * This symbol, if defined, indicates that the endnetent_r routine
+ * is available to endnetent re-entrantly.
+ */
+/* ENDNETENT_R_PROTO:
+ * This symbol encodes the prototype of endnetent_r.
+ * It is zero if d_endnetent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endnetent_r
+ * is defined.
+ */
+#$d_endnetent_r HAS_ENDNETENT_R /**/
+#define ENDNETENT_R_PROTO $endnetent_r_proto /**/
+
/* HAS_ENDPROTOENT:
* This symbol, if defined, indicates that the endprotoent() routine is
* available to close whatever was being used for protocol queries.
*/
#$d_endpent HAS_ENDPROTOENT /**/
+/* HAS_ENDPROTOENT_R:
+ * This symbol, if defined, indicates that the endprotoent_r routine
+ * is available to endprotoent re-entrantly.
+ */
+/* ENDPROTOENT_R_PROTO:
+ * This symbol encodes the prototype of endprotoent_r.
+ * It is zero if d_endprotoent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endprotoent_r
+ * is defined.
+ */
+#$d_endprotoent_r HAS_ENDPROTOENT_R /**/
+#define ENDPROTOENT_R_PROTO $endprotoent_r_proto /**/
+
/* HAS_ENDPWENT:
* This symbol, if defined, indicates that the getgrent routine is
* available for finalizing sequential access of the passwd database.
*/
#$d_endsent HAS_ENDSERVENT /**/
-/* HAS_FCHDIR:
- * This symbol, if defined, indicates that the fchdir routine is
- * available to change directory using a file descriptor.
+/* HAS_ENDSERVENT_R:
+ * This symbol, if defined, indicates that the endservent_r routine
+ * is available to endservent re-entrantly.
*/
-#$d_fchdir HAS_FCHDIR /**/
-
-/* FCNTL_CAN_LOCK:
- * This symbol, if defined, indicates that fcntl() can be used
- * for file locking. Normally on Unix systems this is defined.
- * It may be undefined on VMS.
+/* ENDSERVENT_R_PROTO:
+ * This symbol encodes the prototype of endservent_r.
+ * It is zero if d_endservent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endservent_r
+ * is defined.
*/
-#$d_fcntl_can_lock FCNTL_CAN_LOCK /**/
+#$d_endservent_r HAS_ENDSERVENT_R /**/
+#define ENDSERVENT_R_PROTO $endservent_r_proto /**/
/* HAS_FD_SET:
* This symbol, when defined, indicates presence of the fd_set typedef
*/
#$d_fd_set HAS_FD_SET /**/
-/* HAS_FINITE:
- * This symbol, if defined, indicates that the finite routine is
- * available to check whether a double is finite (non-infinity non-NaN).
- */
-#$d_finite HAS_FINITE /**/
-
-/* HAS_FINITEL:
- * This symbol, if defined, indicates that the finitel routine is
- * available to check whether a long double is finite
- * (non-infinity non-NaN).
- */
-#$d_finitel HAS_FINITEL /**/
-
/* FLEXFILENAMES:
* This symbol, if defined, indicates that the system supports filenames
* longer than 14 characters.
*/
#$d_flexfnam FLEXFILENAMES /**/
-/* HAS_FP_CLASS:
- * This symbol, if defined, indicates that the fp_class routine is
- * available to classify doubles. Available for example in Digital UNIX.
- * The returned values are defined in <math.h> and are:
- *
- * FP_SNAN Signaling NaN (Not-a-Number)
- * FP_QNAN Quiet NaN (Not-a-Number)
- * FP_POS_INF +infinity
- * FP_NEG_INF -infinity
- * FP_POS_NORM Positive normalized
- * FP_NEG_NORM Negative normalized
- * FP_POS_DENORM Positive denormalized
- * FP_NEG_DENORM Negative denormalized
- * FP_POS_ZERO +0.0 (positive zero)
- * FP_NEG_ZERO -0.0 (negative zero)
- */
-#$d_fp_class HAS_FP_CLASS /**/
-
-/* HAS_FPCLASS:
- * This symbol, if defined, indicates that the fpclass routine is
- * available to classify doubles. Available for example in Solaris/SVR4.
- * The returned values are defined in <ieeefp.h> and are:
- *
- * FP_SNAN signaling NaN
- * FP_QNAN quiet NaN
- * FP_NINF negative infinity
- * FP_PINF positive infinity
- * FP_NDENORM negative denormalized non-zero
- * FP_PDENORM positive denormalized non-zero
- * FP_NZERO negative zero
- * FP_PZERO positive zero
- * FP_NNORM negative normalized non-zero
- * FP_PNORM positive normalized non-zero
- */
-#$d_fpclass HAS_FPCLASS /**/
-
-/* HAS_FPCLASSIFY:
- * This symbol, if defined, indicates that the fpclassify routine is
- * available to classify doubles. Available for example in HP-UX.
- * The returned values are defined in <math.h> and are
- *
- * FP_NORMAL Normalized
- * FP_ZERO Zero
- * FP_INFINITE Infinity
- * FP_SUBNORMAL Denormalized
- * FP_NAN NaN
- *
- */
-#$d_fpclassify HAS_FPCLASSIFY /**/
-
-/* HAS_FPOS64_T:
- * This symbol will be defined if the C compiler supports fpos64_t.
- */
-#$d_fpos64_t HAS_FPOS64_T /**/
-
-/* HAS_FREXPL:
- * This symbol, if defined, indicates that the frexpl routine is
- * available to break a long double floating-point number into
- * a normalized fraction and an integral power of 2.
- */
-#$d_frexpl HAS_FREXPL /**/
-
-/* HAS_STRUCT_FS_DATA:
- * This symbol, if defined, indicates that the struct fs_data
- * to do statfs() is supported.
- */
-#$d_fs_data_s HAS_STRUCT_FS_DATA /**/
-
-/* HAS_FSEEKO:
- * This symbol, if defined, indicates that the fseeko routine is
- * available to fseek beyond 32 bits (useful for ILP32 hosts).
- */
-#$d_fseeko HAS_FSEEKO /**/
-
-/* HAS_FSTATFS:
- * This symbol, if defined, indicates that the fstatfs routine is
- * available to stat filesystems by file descriptors.
- */
-#$d_fstatfs HAS_FSTATFS /**/
-
-/* HAS_FSYNC:
- * This symbol, if defined, indicates that the fsync routine is
- * available to write a file's modified data and attributes to
- * permanent storage.
- */
-#$d_fsync HAS_FSYNC /**/
-
-/* HAS_FTELLO:
- * This symbol, if defined, indicates that the ftello routine is
- * available to ftell beyond 32 bits (useful for ILP32 hosts).
- */
-#$d_ftello HAS_FTELLO /**/
-
/* Gconvert:
* This preprocessor macro is defined to convert a floating point
* number to a string without a trailing decimal point. This
*/
#define Gconvert(x,n,t,b) $d_Gconvert
-/* HAS_GETCWD:
- * This symbol, if defined, indicates that the getcwd routine is
- * available to get the current working directory.
- */
-#$d_getcwd HAS_GETCWD /**/
-
-/* HAS_GETESPWNAM:
- * This symbol, if defined, indicates that the getespwnam system call is
- * available to retrieve enchanced (shadow) password entries by name.
- */
-#$d_getespwnam HAS_GETESPWNAM /**/
-
-/* HAS_GETFSSTAT:
- * This symbol, if defined, indicates that the getfsstat routine is
- * available to stat filesystems in bulk.
- */
-#$d_getfsstat HAS_GETFSSTAT /**/
-
/* HAS_GETGRENT:
* This symbol, if defined, indicates that the getgrent routine is
* available for sequential access of the group database.
#define PHOSTNAME "$aphostname" /* How to get the host name */
#endif
-/* HAS_GETHOST_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for gethostent(), gethostbyname(), and
- * gethostbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* HAS_GETHOSTBYADDR_R:
+ * This symbol, if defined, indicates that the gethostbyaddr_r routine
+ * is available to gethostbyaddr re-entrantly.
*/
-#$d_gethostprotos HAS_GETHOST_PROTOS /**/
-
-/* HAS_GETITIMER:
- * This symbol, if defined, indicates that the getitimer routine is
- * available to return interval timers.
+/* GETHOSTBYADDR_R_PROTO:
+ * This symbol encodes the prototype of gethostbyaddr_r.
+ * It is zero if d_gethostbyaddr_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyaddr_r
+ * is defined.
*/
-#$d_getitimer HAS_GETITIMER /**/
+#$d_gethostbyaddr_r HAS_GETHOSTBYADDR_R /**/
+#define GETHOSTBYADDR_R_PROTO $gethostbyaddr_r_proto /**/
+
+/* HAS_GETHOSTBYNAME_R:
+ * This symbol, if defined, indicates that the gethostbyname_r routine
+ * is available to gethostbyname re-entrantly.
+ */
+/* GETHOSTBYNAME_R_PROTO:
+ * This symbol encodes the prototype of gethostbyname_r.
+ * It is zero if d_gethostbyname_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyname_r
+ * is defined.
+ */
+#$d_gethostbyname_r HAS_GETHOSTBYNAME_R /**/
+#define GETHOSTBYNAME_R_PROTO $gethostbyname_r_proto /**/
+
+/* HAS_GETHOSTENT_R:
+ * This symbol, if defined, indicates that the gethostent_r routine
+ * is available to gethostent re-entrantly.
+ */
+/* GETHOSTENT_R_PROTO:
+ * This symbol encodes the prototype of gethostent_r.
+ * It is zero if d_gethostent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostent_r
+ * is defined.
+ */
+#$d_gethostent_r HAS_GETHOSTENT_R /**/
+#define GETHOSTENT_R_PROTO $gethostent_r_proto /**/
+
+/* HAS_GETHOST_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for gethostent(), gethostbyname(), and
+ * gethostbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#$d_gethostprotos HAS_GETHOST_PROTOS /**/
/* HAS_GETLOGIN_R:
* This symbol, if defined, indicates that the getlogin_r routine
#$d_getlogin_r HAS_GETLOGIN_R /**/
#define GETLOGIN_R_PROTO $getlogin_r_proto /**/
-/* HAS_GETMNT:
- * This symbol, if defined, indicates that the getmnt routine is
- * available to get filesystem mount info by filename.
- */
-#$d_getmnt HAS_GETMNT /**/
-
-/* HAS_GETMNTENT:
- * This symbol, if defined, indicates that the getmntent routine is
- * available to iterate through mounted file systems to get their info.
- */
-#$d_getmntent HAS_GETMNTENT /**/
-
/* HAS_GETNETBYADDR:
* This symbol, if defined, indicates that the getnetbyaddr() routine is
* available to look up networks by their IP addresses.
*/
#$d_getnent HAS_GETNETENT /**/
+/* HAS_GETNETBYADDR_R:
+ * This symbol, if defined, indicates that the getnetbyaddr_r routine
+ * is available to getnetbyaddr re-entrantly.
+ */
+/* GETNETBYADDR_R_PROTO:
+ * This symbol encodes the prototype of getnetbyaddr_r.
+ * It is zero if d_getnetbyaddr_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyaddr_r
+ * is defined.
+ */
+#$d_getnetbyaddr_r HAS_GETNETBYADDR_R /**/
+#define GETNETBYADDR_R_PROTO $getnetbyaddr_r_proto /**/
+
+/* HAS_GETNETBYNAME_R:
+ * This symbol, if defined, indicates that the getnetbyname_r routine
+ * is available to getnetbyname re-entrantly.
+ */
+/* GETNETBYNAME_R_PROTO:
+ * This symbol encodes the prototype of getnetbyname_r.
+ * It is zero if d_getnetbyname_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyname_r
+ * is defined.
+ */
+#$d_getnetbyname_r HAS_GETNETBYNAME_R /**/
+#define GETNETBYNAME_R_PROTO $getnetbyname_r_proto /**/
+
+/* HAS_GETNETENT_R:
+ * This symbol, if defined, indicates that the getnetent_r routine
+ * is available to getnetent re-entrantly.
+ */
+/* GETNETENT_R_PROTO:
+ * This symbol encodes the prototype of getnetent_r.
+ * It is zero if d_getnetent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetent_r
+ * is defined.
+ */
+#$d_getnetent_r HAS_GETNETENT_R /**/
+#define GETNETENT_R_PROTO $getnetent_r_proto /**/
+
/* HAS_GETNET_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* prototypes for getnetent(), getnetbyname(), and
#$d_getpbyname HAS_GETPROTOBYNAME /**/
#$d_getpbynumber HAS_GETPROTOBYNUMBER /**/
+/* HAS_GETPROTOBYNAME_R:
+ * This symbol, if defined, indicates that the getprotobyname_r routine
+ * is available to getprotobyname re-entrantly.
+ */
+/* GETPROTOBYNAME_R_PROTO:
+ * This symbol encodes the prototype of getprotobyname_r.
+ * It is zero if d_getprotobyname_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobyname_r
+ * is defined.
+ */
+#$d_getprotobyname_r HAS_GETPROTOBYNAME_R /**/
+#define GETPROTOBYNAME_R_PROTO $getprotobyname_r_proto /**/
+
+/* HAS_GETPROTOBYNUMBER_R:
+ * This symbol, if defined, indicates that the getprotobynumber_r routine
+ * is available to getprotobynumber re-entrantly.
+ */
+/* GETPROTOBYNUMBER_R_PROTO:
+ * This symbol encodes the prototype of getprotobynumber_r.
+ * It is zero if d_getprotobynumber_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobynumber_r
+ * is defined.
+ */
+#$d_getprotobynumber_r HAS_GETPROTOBYNUMBER_R /**/
+#define GETPROTOBYNUMBER_R_PROTO $getprotobynumber_r_proto /**/
+
+/* HAS_GETPROTOENT_R:
+ * This symbol, if defined, indicates that the getprotoent_r routine
+ * is available to getprotoent re-entrantly.
+ */
+/* GETPROTOENT_R_PROTO:
+ * This symbol encodes the prototype of getprotoent_r.
+ * It is zero if d_getprotoent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotoent_r
+ * is defined.
+ */
+#$d_getprotoent_r HAS_GETPROTOENT_R /**/
+#define GETPROTOENT_R_PROTO $getprotoent_r_proto /**/
+
/* HAS_GETPROTO_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* prototypes for getprotoent(), getprotobyname(), and
*/
#$d_getprotoprotos HAS_GETPROTO_PROTOS /**/
-/* HAS_GETPRPWNAM:
- * This symbol, if defined, indicates that the getprpwnam system call is
- * available to retrieve protected (shadow) password entries by name.
- */
-#$d_getprpwnam HAS_GETPRPWNAM /**/
-
/* HAS_GETPWENT:
* This symbol, if defined, indicates that the getpwent routine is
* available for sequential access of the passwd database.
*/
#$d_getsent HAS_GETSERVENT /**/
+/* HAS_GETSERVBYNAME_R:
+ * This symbol, if defined, indicates that the getservbyname_r routine
+ * is available to getservbyname re-entrantly.
+ */
+/* GETSERVBYNAME_R_PROTO:
+ * This symbol encodes the prototype of getservbyname_r.
+ * It is zero if d_getservbyname_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyname_r
+ * is defined.
+ */
+#$d_getservbyname_r HAS_GETSERVBYNAME_R /**/
+#define GETSERVBYNAME_R_PROTO $getservbyname_r_proto /**/
+
+/* HAS_GETSERVBYPORT_R:
+ * This symbol, if defined, indicates that the getservbyport_r routine
+ * is available to getservbyport re-entrantly.
+ */
+/* GETSERVBYPORT_R_PROTO:
+ * This symbol encodes the prototype of getservbyport_r.
+ * It is zero if d_getservbyport_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyport_r
+ * is defined.
+ */
+#$d_getservbyport_r HAS_GETSERVBYPORT_R /**/
+#define GETSERVBYPORT_R_PROTO $getservbyport_r_proto /**/
+
+/* HAS_GETSERVENT_R:
+ * This symbol, if defined, indicates that the getservent_r routine
+ * is available to getservent re-entrantly.
+ */
+/* GETSERVENT_R_PROTO:
+ * This symbol encodes the prototype of getservent_r.
+ * It is zero if d_getservent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r
+ * is defined.
+ */
+#$d_getservent_r HAS_GETSERVENT_R /**/
+#define GETSERVENT_R_PROTO $getservent_r_proto /**/
+
/* HAS_GETSERV_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* prototypes for getservent(), getservbyname(), and
*/
#$d_getservprotos HAS_GETSERV_PROTOS /**/
-/* HAS_GETSPNAM:
- * This symbol, if defined, indicates that the getspnam system call is
- * available to retrieve SysV shadow password entries by name.
- */
-#$d_getspnam HAS_GETSPNAM /**/
-
/* HAS_GETSPNAM_R:
* This symbol, if defined, indicates that the getspnam_r routine
* is available to getspnam re-entrantly.
#define GMTIME_R_PROTO $gmtime_r_proto /**/
/* HAS_GNULIBC:
- * This symbol, if defined, indicates to the C program that
+ * This symbol, if defined, indicates to the C program that
* the GNU C library is being used. A better check is to use
* the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
*/
#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
# define _GNU_SOURCE
#endif
-/* HAS_HASMNTOPT:
- * This symbol, if defined, indicates that the hasmntopt routine is
- * available to query the mount options of file systems.
- */
-#$d_hasmntopt HAS_HASMNTOPT /**/
/* HAS_HTONL:
* This symbol, if defined, indicates that the htonl() routine (and
#$d_htonl HAS_NTOHL /**/
#$d_htonl HAS_NTOHS /**/
-/* HAS_INT64_T:
- * This symbol will defined if the C compiler supports int64_t.
- * Usually the <inttypes.h> needs to be included, but sometimes
- * <sys/types.h> is enough.
- */
-#$d_int64_t HAS_INT64_T /**/
-
/* HAS_ISASCII:
- * This manifest constant lets the C program know that isascii
+ * This manifest constant lets the C program know that isascii
* is available.
*/
#$d_isascii HAS_ISASCII /**/
-/* HAS_ISFINITE:
- * This symbol, if defined, indicates that the isfinite routine is
- * available to check whether a double is finite (non-infinity non-NaN).
- */
-#$d_isfinite HAS_ISFINITE /**/
-
-/* HAS_ISINF:
- * This symbol, if defined, indicates that the isinf routine is
- * available to check whether a double is an infinity.
- */
-#$d_isinf HAS_ISINF /**/
-
-/* HAS_ISNAN:
- * This symbol, if defined, indicates that the isnan routine is
- * available to check whether a double is a NaN.
- */
-#$d_isnan HAS_ISNAN /**/
-
-/* HAS_ISNANL:
- * This symbol, if defined, indicates that the isnanl routine is
- * available to check whether a long double is a NaN.
- */
-#$d_isnanl HAS_ISNANL /**/
-
/* HAS_LCHOWN:
* This symbol, if defined, indicates that the lchown routine is
* available to operate on a symbolic link (instead of following the
*/
#$d_lchown HAS_LCHOWN /**/
-/* HAS_LDBL_DIG:
- * This symbol, if defined, indicates that this system's <float.h>
- * or <limits.h> defines the symbol LDBL_DIG, which is the number
- * of significant digits in a long double precision number. Unlike
- * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
- */
-#$d_ldbl_dig HAS_LDBL_DIG /* */
-
/* HAS_LOCALTIME_R:
* This symbol, if defined, indicates that the localtime_r routine
* is available to localtime re-entrantly.
*/
+/* LOCALTIME_R_NEEDS_TZSET:
+ * Many libc's localtime_r implementations do not call tzset,
+ * making them differ from localtime(), and making timezone
+ * changes using \$ENV{TZ} without explicitly calling tzset
+ * impossible. This symbol makes us call tzset before localtime_r
+ */
+#$d_localtime_r_needs_tzset LOCALTIME_R_NEEDS_TZSET /**/
+#ifdef LOCALTIME_R_NEEDS_TZSET
+#define L_R_TZSET tzset(),
+#else
+#define L_R_TZSET
+#endif
+
/* LOCALTIME_R_PROTO:
* This symbol encodes the prototype of localtime_r.
* It is zero if d_localtime_r is undef, and one of the
* doubles.
*/
/* LONG_DOUBLESIZE:
- * This symbol contains the size of a long double, so that the
+ * This symbol contains the size of a long double, so that the
* C preprocessor can make decisions based on it. It is only
* defined if the system supports long doubles.
*/
* This symbol will be defined if the C compiler supports long long.
*/
/* LONGLONGSIZE:
- * This symbol contains the size of a long long, so that the
+ * This symbol contains the size of a long long, so that the
* C preprocessor can make decisions based on it. It is only
* defined if the system supports long long.
*/
*/
#$d_lseekproto HAS_LSEEK_PROTO /**/
-/* HAS_MADVISE:
- * This symbol, if defined, indicates that the madvise system call is
- * available to map a file into memory.
- */
-#$d_madvise HAS_MADVISE /**/
-
/* HAS_MEMCHR:
* This symbol, if defined, indicates that the memchr routine is available
* to locate characters within a C string.
*/
#$d_memchr HAS_MEMCHR /**/
-/* HAS_MKDTEMP:
- * This symbol, if defined, indicates that the mkdtemp routine is
- * available to exclusively create a uniquely named temporary directory.
- */
-#$d_mkdtemp HAS_MKDTEMP /**/
-
/* HAS_MKSTEMP:
* This symbol, if defined, indicates that the mkstemp routine is
* available to exclusively create and open a uniquely named
*/
#$d_mkstemp HAS_MKSTEMP /**/
-/* HAS_MKSTEMPS:
- * This symbol, if defined, indicates that the mkstemps routine is
- * available to excluslvely create and open a uniquely named
- * (with a suffix) temporary file.
- */
-#$d_mkstemps HAS_MKSTEMPS /**/
-
/* HAS_MMAP:
* This symbol, if defined, indicates that the mmap system call is
* available to map a file into memory.
/* Mmap_t:
* This symbol holds the return type of the mmap() system call
* (and simultaneously the type of the first argument).
- * Usually set to 'void *' or 'cadd_t'.
+ * Usually set to 'void *' or 'caddr_t'.
*/
#$d_mmap HAS_MMAP /**/
#define Mmap_t $mmaptype /**/
-/* HAS_MODFL:
- * This symbol, if defined, indicates that the modfl routine is
- * available to split a long double x into a fractional part f and
- * an integer part i such that |f| < 1.0 and (f + i) = x.
- */
-/* HAS_MODFL_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the modfl() function. Otherwise, it is up
- * to the program to supply one.
- */
-/* HAS_MODFL_POW32_BUG:
- * This symbol, if defined, indicates that the modfl routine is
- * broken for long doubles >= pow(2, 32).
- * For example from 4294967303.150000 one would get 4294967302.000000
- * and 1.150000. The bug has been seen in certain versions of glibc,
- * release 2.2.2 is known to be okay.
- */
-#$d_modfl HAS_MODFL /**/
-#$d_modflproto HAS_MODFL_PROTO /**/
-#$d_modfl_pow32_bug HAS_MODFL_POW32_BUG /**/
-
-/* HAS_MPROTECT:
- * This symbol, if defined, indicates that the mprotect system call is
- * available to modify the access protection of a memory mapped file.
- */
-#$d_mprotect HAS_MPROTECT /**/
-
-/* HAS_MSG:
- * This symbol, if defined, indicates that the entire msg*(2) library is
- * supported (IPC mechanism based on message queues).
+/* HAS_MSG:
+ * This symbol, if defined, indicates that the entire msg*(2) library is
+ * supported (IPC mechanism based on message queues).
*/
#$d_msg HAS_MSG /**/
-/* HAS_STRUCT_MSGHDR:
- * This symbol, if defined, indicates that the struct msghdr
- * is supported.
- */
-#$d_msghdr_s HAS_STRUCT_MSGHDR /**/
-
-/* HAS_OFF64_T:
- * This symbol will be defined if the C compiler supports off64_t.
- */
-#$d_off64_t HAS_OFF64_T /**/
-
/* HAS_OPEN3:
* This manifest constant lets the C program know that the three
* argument form of open(2) is available.
*/
#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/
+/* HAS_PTHREAD_ATFORK:
+ * This symbol, if defined, indicates that the pthread_atfork routine
+ * is available to setup fork handlers.
+ */
+#$d_pthread_atfork HAS_PTHREAD_ATFORK /**/
+
/* HAS_PTHREAD_YIELD:
- * This symbol, if defined, indicates that the pthread_yield
+ * This symbol, if defined, indicates that the pthread_yield
* routine is available to yield the execution of the current
* thread. sched_yield is preferable to pthread_yield.
*/
#$d_random_r HAS_RANDOM_R /**/
#define RANDOM_R_PROTO $random_r_proto /**/
+/* HAS_READDIR64_R:
+ * This symbol, if defined, indicates that the readdir64_r routine
+ * is available to readdir64 re-entrantly.
+ */
+/* READDIR64_R_PROTO:
+ * This symbol encodes the prototype of readdir64_r.
+ * It is zero if d_readdir64_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir64_r
+ * is defined.
+ */
+#$d_readdir64_r HAS_READDIR64_R /**/
+#define READDIR64_R_PROTO $readdir64_r_proto /**/
+
/* HAS_READDIR_R:
* This symbol, if defined, indicates that the readdir_r routine
* is available to readdir re-entrantly.
#$d_readdir_r HAS_READDIR_R /**/
#define READDIR_R_PROTO $readdir_r_proto /**/
-/* HAS_READV:
- * This symbol, if defined, indicates that the readv routine is
- * available to do gather reads. You will also need <sys/uio.h>
- * and there I_SYSUIO.
- */
-#$d_readv HAS_READV /**/
-
-/* HAS_RECVMSG:
- * This symbol, if defined, indicates that the recvmsg routine is
- * available to send structured socket messages.
- */
-#$d_recvmsg HAS_RECVMSG /**/
-
/* HAS_SAFE_BCOPY:
* This symbol, if defined, indicates that the bcopy routine is available
* to copy potentially overlapping memory blocks. Normally, you should
*/
#$d_sanemcmp HAS_SANE_MEMCMP /**/
-/* HAS_SBRK_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the sbrk() function. Otherwise, it is up
- * to the program to supply one. Good guesses are
- * extern void* sbrk(int);
- * extern void* sbrk(size_t);
- */
-#$d_sbrkproto HAS_SBRK_PROTO /**/
-
/* HAS_SEM:
* This symbol, if defined, indicates that the entire sem*(2) library is
* supported.
*/
#$d_sem HAS_SEM /**/
-/* HAS_SENDMSG:
- * This symbol, if defined, indicates that the sendmsg routine is
- * available to send structured socket messages.
- */
-#$d_sendmsg HAS_SENDMSG /**/
-
/* HAS_SETGRENT:
* This symbol, if defined, indicates that the setgrent routine is
* available for initializing sequential access of the group database.
#$d_setgrent_r HAS_SETGRENT_R /**/
#define SETGRENT_R_PROTO $setgrent_r_proto /**/
-/* HAS_SETGROUPS:
- * This symbol, if defined, indicates that the setgroups() routine is
- * available to set the list of process groups. If unavailable, multiple
- * groups are probably not supported.
- */
-#$d_setgrps HAS_SETGROUPS /**/
-
/* HAS_SETHOSTENT:
* This symbol, if defined, indicates that the sethostent() routine is
* available.
*/
#$d_sethent HAS_SETHOSTENT /**/
-/* HAS_SETITIMER:
- * This symbol, if defined, indicates that the setitimer routine is
- * available to set interval timers.
+/* HAS_SETHOSTENT_R:
+ * This symbol, if defined, indicates that the sethostent_r routine
+ * is available to sethostent re-entrantly.
*/
-#$d_setitimer HAS_SETITIMER /**/
+/* SETHOSTENT_R_PROTO:
+ * This symbol encodes the prototype of sethostent_r.
+ * It is zero if d_sethostent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_sethostent_r
+ * is defined.
+ */
+#$d_sethostent_r HAS_SETHOSTENT_R /**/
+#define SETHOSTENT_R_PROTO $sethostent_r_proto /**/
+
+/* HAS_SETLOCALE_R:
+ * This symbol, if defined, indicates that the setlocale_r routine
+ * is available to setlocale re-entrantly.
+ */
+/* SETLOCALE_R_PROTO:
+ * This symbol encodes the prototype of setlocale_r.
+ * It is zero if d_setlocale_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setlocale_r
+ * is defined.
+ */
+#$d_setlocale_r HAS_SETLOCALE_R /**/
+#define SETLOCALE_R_PROTO $setlocale_r_proto /**/
/* HAS_SETNETENT:
* This symbol, if defined, indicates that the setnetent() routine is
*/
#$d_setnent HAS_SETNETENT /**/
+/* HAS_SETNETENT_R:
+ * This symbol, if defined, indicates that the setnetent_r routine
+ * is available to setnetent re-entrantly.
+ */
+/* SETNETENT_R_PROTO:
+ * This symbol encodes the prototype of setnetent_r.
+ * It is zero if d_setnetent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setnetent_r
+ * is defined.
+ */
+#$d_setnetent_r HAS_SETNETENT_R /**/
+#define SETNETENT_R_PROTO $setnetent_r_proto /**/
+
/* HAS_SETPROTOENT:
* This symbol, if defined, indicates that the setprotoent() routine is
* available.
#$d_setpgrp HAS_SETPGRP /**/
#$d_bsdsetpgrp USE_BSD_SETPGRP /**/
-/* HAS_SETPROCTITLE:
- * This symbol, if defined, indicates that the setproctitle routine is
- * available to set process title.
+/* HAS_SETPROTOENT_R:
+ * This symbol, if defined, indicates that the setprotoent_r routine
+ * is available to setprotoent re-entrantly.
*/
-#$d_setproctitle HAS_SETPROCTITLE /**/
+/* SETPROTOENT_R_PROTO:
+ * This symbol encodes the prototype of setprotoent_r.
+ * It is zero if d_setprotoent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setprotoent_r
+ * is defined.
+ */
+#$d_setprotoent_r HAS_SETPROTOENT_R /**/
+#define SETPROTOENT_R_PROTO $setprotoent_r_proto /**/
/* HAS_SETPWENT:
* This symbol, if defined, indicates that the setpwent routine is
*/
#$d_setsent HAS_SETSERVENT /**/
+/* HAS_SETSERVENT_R:
+ * This symbol, if defined, indicates that the setservent_r routine
+ * is available to setservent re-entrantly.
+ */
+/* SETSERVENT_R_PROTO:
+ * This symbol encodes the prototype of setservent_r.
+ * It is zero if d_setservent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setservent_r
+ * is defined.
+ */
+#$d_setservent_r HAS_SETSERVENT_R /**/
+#define SETSERVENT_R_PROTO $setservent_r_proto /**/
+
/* HAS_SETVBUF:
* This symbol, if defined, indicates that the setvbuf routine is
* available to change buffering on an open stdio stream.
*/
#$d_setvbuf HAS_SETVBUF /**/
-/* USE_SFIO:
- * This symbol, if defined, indicates that sfio should
- * be used.
- */
-#$d_sfio USE_SFIO /**/
-
/* HAS_SHM:
* This symbol, if defined, indicates that the entire shm*(2) library is
* supported.
*/
#$d_shm HAS_SHM /**/
+/* Shmat_t:
+ * This symbol holds the return type of the shmat() system call.
+ * Usually set to 'void *' or 'char *'.
+ */
+/* HAS_SHMAT_PROTOTYPE:
+ * This symbol, if defined, indicates that the sys/shm.h includes
+ * a prototype for shmat(). Otherwise, it is up to the program to
+ * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess,
+ * but not always right so it should be emitted by the program only
+ * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
+ */
+#define Shmat_t $shmattype /**/
+#$d_shmatprototype HAS_SHMAT_PROTOTYPE /**/
+
/* HAS_SIGACTION:
* This symbol, if defined, indicates that Vr4's sigaction() routine
* is available.
* Checking just with #ifdef might not be enough because this symbol
* has been known to be an enum.
*/
+/* HAS_SOCKADDR_SA_LEN:
+ * This symbol, if defined, indicates that the struct sockaddr
+ * structure has a member called sa_len, indicating the length of
+ * the structure.
+ */
+/* HAS_SOCKADDR_IN6:
+ * This symbol, if defined, indicates the availability of
+ * struct sockaddr_in6;
+ */
+/* HAS_SIN6_SCOPE_ID:
+ * This symbol, if defined, indicates that the struct sockaddr_in6
+ * structure has a member called sin6_scope_id.
+ */
+/* HAS_IP_MREQ:
+ * This symbol, if defined, indicates the availability of
+ * struct ip_mreq;
+ */
+/* HAS_IP_MREQ_SOURCE:
+ * This symbol, if defined, indicates the availability of
+ * struct ip_mreq_source;
+ */
+/* HAS_IPV6_MREQ:
+ * This symbol, if defined, indicates the availability of
+ * struct ipv6_mreq;
+ */
+/* HAS_IPV6_MREQ_SOURCE:
+ * This symbol, if defined, indicates the availability of
+ * struct ipv6_mreq_source;
+ */
#$d_socket HAS_SOCKET /**/
#$d_sockpair HAS_SOCKETPAIR /**/
+#$d_sockaddr_sa_len HAS_SOCKADDR_SA_LEN /**/
#$d_msg_ctrunc HAS_MSG_CTRUNC /**/
#$d_msg_dontroute HAS_MSG_DONTROUTE /**/
#$d_msg_oob HAS_MSG_OOB /**/
#$d_msg_peek HAS_MSG_PEEK /**/
#$d_msg_proxy HAS_MSG_PROXY /**/
#$d_scm_rights HAS_SCM_RIGHTS /**/
-
-/* HAS_SOCKS5_INIT:
- * This symbol, if defined, indicates that the socks5_init routine is
- * available to initialize SOCKS 5.
- */
-#$d_socks5_init HAS_SOCKS5_INIT /**/
-
-/* HAS_SQRTL:
- * This symbol, if defined, indicates that the sqrtl routine is
- * available to do long double square roots.
- */
-#$d_sqrtl HAS_SQRTL /**/
+#$d_sockaddr_in6 HAS_SOCKADDR_IN6 /**/
+#$d_sin6_scope_id HAS_SIN6_SCOPE_ID /**/
+#$d_ip_mreq HAS_IP_MREQ /**/
+#$d_ip_mreq_source HAS_IP_MREQ_SOURCE /**/
+#$d_ipv6_mreq HAS_IPV6_MREQ /**/
+#$d_ipv6_mreq_source HAS_IPV6_MREQ_SOURCE /**/
/* HAS_SRAND48_R:
* This symbol, if defined, indicates that the srand48_r routine
#$d_statblks USE_STAT_BLOCKS /**/
#endif
-/* HAS_STRUCT_STATFS_F_FLAGS:
- * This symbol, if defined, indicates that the struct statfs
- * does have the f_flags member containing the mount flags of
- * the filesystem containing the file.
- * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
- * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
- * have statfs() and struct statfs, they have ustat() and getmnt()
- * with struct ustat and struct fs_data.
- */
-#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS /**/
-
-/* HAS_STRUCT_STATFS:
- * This symbol, if defined, indicates that the struct statfs
- * to do statfs() is supported.
- */
-#$d_statfs_s HAS_STRUCT_STATFS /**/
-
-/* HAS_FSTATVFS:
- * This symbol, if defined, indicates that the fstatvfs routine is
- * available to stat filesystems by file descriptors.
- */
-#$d_fstatvfs HAS_FSTATVFS /**/
+/* HAS_STATIC_INLINE:
+ * This symbol, if defined, indicates that the C compiler supports
+ * C99-style static inline. That is, the function can't be called
+ * from another translation unit.
+ */
+/* PERL_STATIC_INLINE:
+ * This symbol gives the best-guess incantation to use for static
+ * inline functions. If HAS_STATIC_INLINE is defined, this will
+ * give C99-style inline. If HAS_STATIC_INLINE is not defined,
+ * this will give a plain 'static'. It will always be defined
+ * to something that gives static linkage.
+ * Possibilities include
+ * static inline (c99)
+ * static __inline__ (gcc -ansi)
+ * static __inline (MSVC)
+ * static _inline (older MSVC)
+ * static (c89 compilers)
+ */
+#$d_static_inline HAS_STATIC_INLINE /**/
+#define PERL_STATIC_INLINE $perl_static_inline /**/
/* USE_STDIO_PTR:
* This symbol is defined if the _ptr and _cnt fields (or similar)
#define FILE_bufsiz(fp) $stdio_bufsiz
#endif
+/* USE_STRUCT_COPY:
+ * This symbol, if defined, indicates that this C compiler knows how
+ * to copy structures. If undefined, you'll need to use a block copy
+ * routine of some sort instead.
+ */
+#$d_strctcpy USE_STRUCT_COPY /**/
+
/* HAS_STRERROR:
* This symbol, if defined, indicates that the strerror routine is
* available to translate error numbers to strings. See the writeup
#$d_strerror_r HAS_STRERROR_R /**/
#define STRERROR_R_PROTO $strerror_r_proto /**/
-/* HAS_STRLCAT:
- * This symbol, if defined, indicates that the strlcat () routine is
- * available to do string concatenation.
- */
-#$d_strlcat HAS_STRLCAT /**/
-
-/* HAS_STRLCPY:
- * This symbol, if defined, indicates that the strlcpy () routine is
- * available to do string copying.
- */
-#$d_strlcpy HAS_STRLCPY /**/
-
-/* HAS_STRTOLD:
- * This symbol, if defined, indicates that the strtold routine is
- * available to convert strings to long doubles.
- */
-#$d_strtold HAS_STRTOLD /**/
-
-/* HAS_STRTOLL:
- * This symbol, if defined, indicates that the strtoll routine is
- * available to convert strings to long longs.
- */
-#$d_strtoll HAS_STRTOLL /**/
-
-/* HAS_STRTOQ:
- * This symbol, if defined, indicates that the strtoq routine is
- * available to convert strings to long longs (quads).
- */
-#$d_strtoq HAS_STRTOQ /**/
-
/* HAS_STRTOUL:
* This symbol, if defined, indicates that the strtoul routine is
* available to provide conversion of strings to unsigned long.
*/
#$d_strtoul HAS_STRTOUL /**/
-/* HAS_STRTOULL:
- * This symbol, if defined, indicates that the strtoull routine is
- * available to convert strings to unsigned long longs.
- */
-#$d_strtoull HAS_STRTOULL /**/
-
-/* HAS_STRTOUQ:
- * This symbol, if defined, indicates that the strtouq routine is
- * available to convert strings to unsigned long longs (quads).
- */
-#$d_strtouq HAS_STRTOUQ /**/
-
-/* HAS_TELLDIR_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the telldir() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern long telldir(DIR*);
- */
-#$d_telldirproto HAS_TELLDIR_PROTO /**/
-
/* HAS_TIME:
* This symbol, if defined, indicates that the time() routine exists.
*/
#$d_tmpnam_r HAS_TMPNAM_R /**/
#define TMPNAM_R_PROTO $tmpnam_r_proto /**/
-/* HAS_UALARM:
- * This symbol, if defined, indicates that the ualarm routine is
- * available to do alarms with microsecond granularity.
+/* HAS_TTYNAME_R:
+ * This symbol, if defined, indicates that the ttyname_r routine
+ * is available to ttyname re-entrantly.
*/
-#$d_ualarm HAS_UALARM /**/
+/* TTYNAME_R_PROTO:
+ * This symbol encodes the prototype of ttyname_r.
+ * It is zero if d_ttyname_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ttyname_r
+ * is defined.
+ */
+#$d_ttyname_r HAS_TTYNAME_R /**/
+#define TTYNAME_R_PROTO $ttyname_r_proto /**/
/* HAS_UNION_SEMUN:
* This symbol, if defined, indicates that the union semun is
#$d_semctl_semun USE_SEMCTL_SEMUN /**/
#$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/
-/* HAS_UNORDERED:
- * This symbol, if defined, indicates that the unordered routine is
- * available to check whether two doubles are unordered
- * (effectively: whether either of them is NaN)
- */
-#$d_unordered HAS_UNORDERED /**/
-
-/* HAS_USTAT:
- * This symbol, if defined, indicates that the ustat system call is
- * available to query file system statistics by dev_t.
- */
-#$d_ustat HAS_USTAT /**/
-
/* HAS_VFORK:
* This symbol, if defined, indicates that vfork() exists.
*/
#$d_vfork HAS_VFORK /**/
+/* HAS_PSEUDOFORK:
+ * This symbol, if defined, indicates that an emulation of the
+ * fork routine is available.
+ */
+#$d_pseudofork HAS_PSEUDOFORK /**/
+
/* Signal_t:
* This symbol's value is either "void" or "int", corresponding to the
* appropriate return type of a signal handler. Thus, you can declare
*/
#define Signal_t $signal_t /* Signal handler's return type */
+/* HASVOLATILE:
+ * This symbol, if defined, indicates that this C compiler knows about
+ * the volatile declaration.
+ */
+#$d_volatile HASVOLATILE /**/
+#ifndef HASVOLATILE
+#define volatile
+#endif
+
/* HAS_VPRINTF:
* This symbol, if defined, indicates that the vprintf routine is available
* to printf with a pointer to an argument list. If unavailable, you
#$d_vprintf HAS_VPRINTF /**/
#$d_charvspr USE_CHAR_VSPRINTF /**/
-/* HAS_WRITEV:
- * This symbol, if defined, indicates that the writev routine is
- * available to do scatter writes.
- */
-#$d_writev HAS_WRITEV /**/
-
-/* USE_DYNAMIC_LOADING:
- * This symbol, if defined, indicates that dynamic loading of
- * some sort is available.
- */
-#$usedl USE_DYNAMIC_LOADING /**/
-
/* DOUBLESIZE:
* This symbol contains the size of a double, so that the C preprocessor
* can make decisions based on it.
#define DOUBLESIZE $doublesize /**/
/* EBCDIC:
- * This symbol, if defined, indicates that this system uses
+ * This symbol, if defined, indicates that this system uses
* EBCDIC encoding.
*/
-#$ebcdic EBCDIC /**/
-
-/* FFLUSH_NULL:
- * This symbol, if defined, tells that fflush(NULL) does flush
- * all pending stdio output.
- */
-/* FFLUSH_ALL:
- * This symbol, if defined, tells that to flush
- * all pending stdio output one must loop through all
- * the stdio file handles stored in an array and fflush them.
- * Note that if fflushNULL is defined, fflushall will not
- * even be probed for and will be left undefined.
+/* BOOTSTRAP_CHARSET:
+ * This symbol, if defined, indicates that this system needs
+ * converting various files to the native character set before
+ * bringing up perl on a system that has a non-ASCII character
+ * set and no working perl.
*/
-#$fflushNULL FFLUSH_NULL /**/
-#$fflushall FFLUSH_ALL /**/
+#$ebcdic EBCDIC /**/
+#$bootstrap_charset BOOTSTRAP_CHARSET /**/
/* Fpos_t:
* This symbol holds the type used to declare file positions in libc.
#define Gid_t_f $gidformat /**/
/* Gid_t_sign:
- * This symbol holds the signedess of a Gid_t.
+ * This symbol holds the signedness of a Gid_t.
* 1 for unsigned, -1 for signed.
*/
#define Gid_t_sign $gidsign /* GID sign */
*/
#define Gid_t $gidtype /* Type for getgid(), etc... */
-/* Groups_t:
- * This symbol holds the type used for the second argument to
- * getgroups() and setgroups(). Usually, this is the same as
- * gidtype (gid_t) , but sometimes it isn't.
- * It can be int, ushort, gid_t, etc...
- * It may be necessary to include <sys/types.h> to get any
- * typedef'ed information. This is only required if you have
- * getgroups() or setgroups()..
- */
-#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
-#define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */
-#endif
-
-/* DB_Prefix_t:
- * This symbol contains the type of the prefix structure element
- * in the <db.h> header file. In older versions of DB, it was
- * int, while in newer ones it is u_int32_t.
- */
-/* DB_Hash_t:
- * This symbol contains the type of the prefix structure element
- * in the <db.h> header file. In older versions of DB, it was
- * int, while in newer ones it is size_t.
- */
-/* DB_VERSION_MAJOR_CFG:
- * This symbol, if defined, defines the major version number of
- * Berkeley DB found in the <db.h> header when Perl was configured.
- */
-/* DB_VERSION_MINOR_CFG:
- * This symbol, if defined, defines the minor version number of
- * Berkeley DB found in the <db.h> header when Perl was configured.
- * For DB version 1 this is always 0.
+/* I_DIRENT:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <dirent.h>. Using this symbol also triggers the definition
+ * of the Direntry_t define which ends up being 'struct dirent' or
+ * 'struct direct' depending on the availability of <dirent.h>.
*/
-/* DB_VERSION_PATCH_CFG:
- * This symbol, if defined, defines the patch version number of
- * Berkeley DB found in the <db.h> header when Perl was configured.
- * For DB version 1 this is always 0.
+/* DIRNAMLEN:
+ * This symbol, if defined, indicates to the C program that the length
+ * of directory entry names is provided by a d_namlen field. Otherwise
+ * you need to do strlen() on the d_name field.
*/
-#define DB_Hash_t $db_hashtype /**/
-#define DB_Prefix_t $db_prefixtype /**/
-#define DB_VERSION_MAJOR_CFG $db_version_major /**/
-#define DB_VERSION_MINOR_CFG $db_version_minor /**/
-#define DB_VERSION_PATCH_CFG $db_version_patch /**/
-
-/* I_FP_CLASS:
- * This symbol, if defined, indicates that <fp_class.h> exists and
- * should be included.
+/* Direntry_t:
+ * This symbol is set to 'struct direct' or 'struct dirent' depending on
+ * whether dirent is available or not. You should use this pseudo type to
+ * portably declare your directory entries.
*/
-#$i_fp_class I_FP_CLASS /**/
+#$i_dirent I_DIRENT /**/
+#$d_dirnamlen DIRNAMLEN /**/
+#define Direntry_t $direntrytype
/* I_GRP:
* This symbol, if defined, indicates to the C program that it should
#$i_grp I_GRP /**/
#$d_grpasswd GRPASSWD /**/
-/* I_IEEEFP:
- * This symbol, if defined, indicates that <ieeefp.h> exists and
- * should be included.
- */
-#$i_ieeefp I_IEEEFP /**/
-
-/* I_INTTYPES:
- * This symbol, if defined, indicates to the C program that it should
- * include <inttypes.h>.
- */
-#$i_inttypes I_INTTYPES /**/
-
-/* I_LIBUTIL:
- * This symbol, if defined, indicates that <libutil.h> exists and
- * should be included.
- */
-#$i_libutil I_LIBUTIL /**/
-
/* I_MACH_CTHREADS:
* This symbol, if defined, indicates to the C program that it should
* include <mach/cthreads.h>.
*/
#$i_machcthr I_MACH_CTHREADS /**/
-/* I_MNTENT:
- * This symbol, if defined, indicates that <mntent.h> exists and
- * should be included.
+/* I_NDBM:
+ * This symbol, if defined, indicates that <ndbm.h> exists and should
+ * be included.
*/
-#$i_mntent I_MNTENT /**/
+/* I_GDBMNDBM:
+ * This symbol, if defined, indicates that <gdbm/ndbm.h> exists and should
+ * be included. This was the location of the ndbm.h compatibility file
+ * in RedHat 7.1.
+ */
+/* I_GDBM_NDBM:
+ * This symbol, if defined, indicates that <gdbm-ndbm.h> exists and should
+ * be included. This is the location of the ndbm.h compatibility file
+ * in Debian 4.0.
+ */
+/* NDBM_H_USES_PROTOTYPES:
+ * This symbol, if defined, indicates that <ndbm.h> uses real ANSI C
+ * prototypes instead of K&R style function declarations without any
+ * parameter information. While ANSI C prototypes are supported in C++,
+ * K&R style function declarations will yield errors.
+ */
+/* GDBMNDBM_H_USES_PROTOTYPES:
+ * This symbol, if defined, indicates that <gdbm/ndbm.h> uses real ANSI C
+ * prototypes instead of K&R style function declarations without any
+ * parameter information. While ANSI C prototypes are supported in C++,
+ * K&R style function declarations will yield errors.
+ */
+/* GDBM_NDBM_H_USES_PROTOTYPES:
+ * This symbol, if defined, indicates that <gdbm-ndbm.h> uses real ANSI C
+ * prototypes instead of K&R style function declarations without any
+ * parameter information. While ANSI C prototypes are supported in C++,
+ * K&R style function declarations will yield errors.
+ */
+#$i_ndbm I_NDBM /**/
+#$i_gdbmndbm I_GDBMNDBM /**/
+#$i_gdbm_ndbm I_GDBM_NDBM /**/
+#$d_ndbm_h_uses_prototypes NDBM_H_USES_PROTOTYPES /**/
+#$d_gdbmndbm_h_uses_prototypes GDBMNDBM_H_USES_PROTOTYPES /**/
+#$d_gdbm_ndbm_h_uses_prototypes GDBM_NDBM_H_USES_PROTOTYPES /**/
/* I_NETDB:
* This symbol, if defined, indicates that <netdb.h> exists and
*/
#$i_netdb I_NETDB /**/
-/* I_NETINET_TCP:
- * This symbol, if defined, indicates to the C program that it should
- * include <netinet/tcp.h>.
- */
-#$i_netinettcp I_NETINET_TCP /**/
-
-/* I_POLL:
- * This symbol, if defined, indicates that <poll.h> exists and
- * should be included.
- */
-#$i_poll I_POLL /**/
-
-/* I_PROT:
- * This symbol, if defined, indicates that <prot.h> exists and
+/* I_NET_ERRNO:
+ * This symbol, if defined, indicates that <net/errno.h> exists and
* should be included.
*/
-#$i_prot I_PROT /**/
+#$i_neterrno I_NET_ERRNO /**/
/* I_PTHREAD:
* This symbol, if defined, indicates to the C program that it should
#$d_pwgecos PWGECOS /**/
#$d_pwpasswd PWPASSWD /**/
-/* I_SHADOW:
- * This symbol, if defined, indicates that <shadow.h> exists and
- * should be included.
- */
-#$i_shadow I_SHADOW /**/
-
-/* I_SOCKS:
- * This symbol, if defined, indicates that <socks.h> exists and
- * should be included.
- */
-#$i_socks I_SOCKS /**/
-
-/* I_SUNMATH:
- * This symbol, if defined, indicates that <sunmath.h> exists and
- * should be included.
- */
-#$i_sunmath I_SUNMATH /**/
-
-/* I_SYSLOG:
- * This symbol, if defined, indicates that <syslog.h> exists and
- * should be included.
- */
-#$i_syslog I_SYSLOG /**/
-
-/* I_SYSMODE:
- * This symbol, if defined, indicates that <sys/mode.h> exists and
- * should be included.
- */
-#$i_sysmode I_SYSMODE /**/
-
-/* I_SYS_MOUNT:
- * This symbol, if defined, indicates that <sys/mount.h> exists and
- * should be included.
- */
-#$i_sysmount I_SYS_MOUNT /**/
-
-/* I_SYS_STATFS:
- * This symbol, if defined, indicates that <sys/statfs.h> exists.
+/* I_SYS_ACCESS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/access.h>.
*/
-#$i_sysstatfs I_SYS_STATFS /**/
+#$i_sysaccess I_SYS_ACCESS /**/
-/* I_SYS_STATVFS:
- * This symbol, if defined, indicates that <sys/statvfs.h> exists and
- * should be included.
+/* I_SYS_SECURITY:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/security.h>.
*/
-#$i_sysstatvfs I_SYS_STATVFS /**/
+#$i_syssecrt I_SYS_SECURITY /**/
/* I_SYSUIO:
* This symbol, if defined, indicates that <sys/uio.h> exists and
*/
#$i_sysuio I_SYSUIO /**/
-/* I_SYSUTSNAME:
- * This symbol, if defined, indicates that <sys/utsname.h> exists and
- * should be included.
- */
-#$i_sysutsname I_SYSUTSNAME /**/
-
-/* I_SYS_VFS:
- * This symbol, if defined, indicates that <sys/vfs.h> exists and
- * should be included.
- */
-#$i_sysvfs I_SYS_VFS /**/
-
/* I_TIME:
* This symbol, if defined, indicates to the C program that it should
* include <time.h>.
#$d_tm_tm_zone HAS_TM_TM_ZONE /**/
#$d_tm_tm_gmtoff HAS_TM_TM_GMTOFF /**/
-/* I_USTAT:
- * This symbol, if defined, indicates that <ustat.h> exists and
- * should be included.
- */
-#$i_ustat I_USTAT /**/
+/* I_STDARG:
+ * This symbol, if defined, indicates that <stdarg.h> exists and should
+ * be included.
+ */
+/* I_VARARGS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <varargs.h>.
+ */
+#$i_stdarg I_STDARG /**/
+#$i_varargs I_VARARGS /**/
/* PERL_INC_VERSION_LIST:
* This variable specifies the list of subdirectories in over
* for a C initialization string. See the inc_version_list entry
* in Porting/Glossary for more details.
*/
-#define PERL_INC_VERSION_LIST $inc_version_list_init /**/
+#$d_inc_version_list PERL_INC_VERSION_LIST $inc_version_list_init /**/
/* INSTALL_USR_BIN_PERL:
* This symbol, if defined, indicates that Perl is to be installed
*/
#$installusrbinperl INSTALL_USR_BIN_PERL /**/
-/* PERL_PRIfldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'f') for output.
- */
-/* PERL_PRIgldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'g') for output.
- */
-/* PERL_PRIeldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'e') for output.
- */
-/* PERL_SCNfldbl:
- * This symbol, if defined, contains the string used by stdio to
- * format long doubles (format 'f') for input.
- */
-#$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/
-#$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/
-#$d_PRIeldbl PERL_PRIeldbl $sPRIeldbl /**/
-#$d_SCNfldbl PERL_SCNfldbl $sSCNfldbl /**/
-
/* Off_t:
* This symbol holds the type used to declare offsets in the kernel.
* It can be int, long, off_t, etc... It may be necessary to include
#$d_mymalloc MYMALLOC /**/
/* Mode_t:
- * This symbol holds the type used to declare file modes
+ * This symbol holds the type used to declare file modes
* for systems calls. It is usually mode_t, but may be
* int or unsigned short. It may be necessary to include <sys/types.h>
* to get any typedef'ed information.
#define RD_NODATA $rd_nodata
#$d_eofnblk EOF_NONBLOCK
-/* NEED_VA_COPY:
- * This symbol, if defined, indicates that the system stores
- * the variable argument list datatype, va_list, in a format
- * that cannot be copied by simple assignment, so that some
- * other means must be used when copying is required.
- * As such systems vary in their provision (or non-provision)
- * of copying mechanisms, handy.h defines a platform-
- * independent macro, Perl_va_copy(src, dst), to do the job.
- */
-#$need_va_copy NEED_VA_COPY /**/
-
/* Netdb_host_t:
* This symbol holds the type used for the 1st argument
* to gethostbyaddr().
*/
#$d_perl_otherlibdirs PERL_OTHERLIBDIRS "$otherlibdirs" /**/
-/* IVTYPE:
- * This symbol defines the C type used for Perl's IV.
- */
-/* UVTYPE:
- * This symbol defines the C type used for Perl's UV.
- */
-/* I8TYPE:
- * This symbol defines the C type used for Perl's I8.
- */
-/* U8TYPE:
- * This symbol defines the C type used for Perl's U8.
- */
-/* I16TYPE:
- * This symbol defines the C type used for Perl's I16.
- */
-/* U16TYPE:
- * This symbol defines the C type used for Perl's U16.
- */
-/* I32TYPE:
- * This symbol defines the C type used for Perl's I32.
- */
-/* U32TYPE:
- * This symbol defines the C type used for Perl's U32.
- */
-/* I64TYPE:
- * This symbol defines the C type used for Perl's I64.
- */
-/* U64TYPE:
- * This symbol defines the C type used for Perl's U64.
- */
-/* NVTYPE:
- * This symbol defines the C type used for Perl's NV.
- */
-/* IVSIZE:
- * This symbol contains the sizeof(IV).
- */
-/* UVSIZE:
- * This symbol contains the sizeof(UV).
- */
-/* I8SIZE:
- * This symbol contains the sizeof(I8).
- */
-/* U8SIZE:
- * This symbol contains the sizeof(U8).
- */
-/* I16SIZE:
- * This symbol contains the sizeof(I16).
- */
-/* U16SIZE:
- * This symbol contains the sizeof(U16).
- */
-/* I32SIZE:
- * This symbol contains the sizeof(I32).
- */
-/* U32SIZE:
- * This symbol contains the sizeof(U32).
- */
-/* I64SIZE:
- * This symbol contains the sizeof(I64).
- */
-/* U64SIZE:
- * This symbol contains the sizeof(U64).
- */
-/* NVSIZE:
- * This symbol contains the sizeof(NV).
- */
-/* NV_PRESERVES_UV:
- * This symbol, if defined, indicates that a variable of type NVTYPE
- * can preserve all the bits of a variable of type UVTYPE.
- */
-/* NV_PRESERVES_UV_BITS:
- * This symbol contains the number of bits a variable of type NVTYPE
- * can preserve of a variable of type UVTYPE.
- */
-#define IVTYPE $ivtype /**/
-#define UVTYPE $uvtype /**/
-#define I8TYPE $i8type /**/
-#define U8TYPE $u8type /**/
-#define I16TYPE $i16type /**/
-#define U16TYPE $u16type /**/
-#define I32TYPE $i32type /**/
-#define U32TYPE $u32type /**/
-#ifdef HAS_QUAD
-#define I64TYPE $i64type /**/
-#define U64TYPE $u64type /**/
-#endif
-#define NVTYPE $nvtype /**/
-#define IVSIZE $ivsize /**/
-#define UVSIZE $uvsize /**/
-#define I8SIZE $i8size /**/
-#define U8SIZE $u8size /**/
-#define I16SIZE $i16size /**/
-#define U16SIZE $u16size /**/
-#define I32SIZE $i32size /**/
-#define U32SIZE $u32size /**/
-#ifdef HAS_QUAD
-#define I64SIZE $i64size /**/
-#define U64SIZE $u64size /**/
-#endif
-#define NVSIZE $nvsize /**/
-#$d_nv_preserves_uv NV_PRESERVES_UV
-#define NV_PRESERVES_UV_BITS $nv_preserves_uv_bits
-#if UVSIZE == 8
-# ifdef BYTEORDER
-# if BYTEORDER == 0x1234
-# undef BYTEORDER
-# define BYTEORDER 0x12345678
-# else
-# if BYTEORDER == 0x4321
-# undef BYTEORDER
-# define BYTEORDER 0x87654321
-# endif
-# endif
-# endif
-#endif
-
-/* IVdf:
- * This symbol defines the format string used for printing a Perl IV
- * as a signed decimal integer.
- */
-/* UVuf:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned decimal integer.
- */
-/* UVof:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned octal integer.
- */
-/* UVxf:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned hexadecimal integer in lowercase abcdef.
- */
-/* UVXf:
- * This symbol defines the format string used for printing a Perl UV
- * as an unsigned hexadecimal integer in uppercase ABCDEF.
- */
-/* NVef:
- * This symbol defines the format string used for printing a Perl NV
- * using %e-ish floating point format.
- */
-/* NVff:
- * This symbol defines the format string used for printing a Perl NV
- * using %f-ish floating point format.
- */
-/* NVgf:
- * This symbol defines the format string used for printing a Perl NV
- * using %g-ish floating point format.
- */
-#define IVdf $ivdformat /**/
-#define UVuf $uvuformat /**/
-#define UVof $uvoformat /**/
-#define UVxf $uvxformat /**/
-#define UVXf $uvXUformat /**/
-#define NVef $nveformat /**/
-#define NVff $nvfformat /**/
-#define NVgf $nvgformat /**/
-
/* Pid_t:
* This symbol holds the type used to declare process ids in the kernel.
* It can be int, uint, pid_t, etc... It may be necessary to include
#define PRIVLIB "$privlib" /**/
#define PRIVLIB_EXP "$privlibexp" /**/
+/* CAN_PROTOTYPE:
+ * If defined, this macro indicates that the C compiler can handle
+ * function prototypes.
+ */
+/* _:
+ * This macro is used to declare function parameters for folks who want
+ * to make declarations with prototypes using a different style than
+ * the above macros. Use double parentheses. For example:
+ *
+ * int main _((int argc, char *argv[]));
+ */
+#$prototype CAN_PROTOTYPE /**/
+#ifdef CAN_PROTOTYPE
+#define _(args) args
+#else
+#define _(args) ()
+#endif
+
/* PTRSIZE:
* This symbol contains the size of a pointer, so that the C preprocessor
* can make decisions based on it. It will be sizeof(void *) if
*/
#define PTRSIZE $ptrsize /**/
+/* HAS_QUAD:
+ * This symbol, if defined, tells that there's a 64-bit integer type,
+ * Quad_t, and its unsigned counterpart, Uquad_t. QUADKIND will be one
+ * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, QUAD_IS_INT64_T,
+ * or QUAD_IS___INT64.
+ */
+#$d_quad HAS_QUAD /**/
+#ifdef HAS_QUAD
+# define Quad_t $quadtype /**/
+# define Uquad_t $uquadtype /**/
+# define QUADKIND $quadkind /**/
+# define QUAD_IS_INT 1
+# define QUAD_IS_LONG 2
+# define QUAD_IS_LONG_LONG 3
+# define QUAD_IS_INT64_T 4
+# define QUAD_IS___INT64 5
+#endif
+
/* Drand01:
* This macro is to be used to generate uniformly distributed
* random numbers over the range [0., 1.[. You may have to supply
#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/
#define RANDBITS $randbits /**/
-/* SELECT_MIN_BITS:
- * This symbol holds the minimum number of bits operated by select.
- * That is, if you do select(n, ...), how many bits at least will be
- * cleared in the masks if some activity is detected. Usually this
- * is either n or 32*ceil(n/32), especially many little-endians do
- * the latter. This is only useful if you have select(), naturally.
- */
-#define SELECT_MIN_BITS $selectminbits /**/
-
/* Select_fd_set_t:
* This symbol holds the type used for the 2nd, 3rd, and 4th
* arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
- * is defined, and 'int *' otherwise. This is only useful if you
+ * is defined, and 'int *' otherwise. This is only useful if you
* have select(), of course.
*/
#define Select_fd_set_t $selecttype /**/
+/* SH_PATH:
+ * This symbol contains the full pathname to the shell used on this
+ * on this system to execute Bourne shell scripts. Usually, this will be
+ * /bin/sh, though it's possible that some systems will have /bin/ksh,
+ * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
+ * D:/bin/sh.exe.
+ */
+#define SH_PATH "$sh" /**/
+
/* SIG_NAME:
* This symbol contains a list of signal names in order of
* signal number. This is intended
* The signals in the list are separated with commas, and the indices
* within that list and the SIG_NAME list match, so it's easy to compute
* the signal name from a number or vice versa at the price of a small
- * dynamic linear lookup.
+ * dynamic linear lookup.
* Duplicates are allowed, but are moved to the end of the list.
* The signal number corresponding to sig_name[i] is sig_number[i].
- * if (i < NSIG) then sig_number[i] == i.
+ * if (i < NSIG) then sig_number[i] == i.
* The last element is 0, corresponding to the 0 at the end of
* the sig_name_init list.
* Note that this variable is initialized from the sig_num_init,
* This symbol contains the ~name expanded version of SITEARCH, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define SITEARCH "$sitearch" /**/
-#define SITEARCH_EXP "$sitearchexp" /**/
+#$d_sitearch SITEARCH "$sitearch" /**/
+#$d_sitearch SITEARCH_EXP "$sitearchexp" /**/
/* SITELIB:
* This symbol contains the name of the private library for this package.
#define SITELIB_EXP "$sitelibexp" /**/
#define SITELIB_STEM "$sitelib_stem" /**/
-/* USE_SITECUSTOMIZE:
- * This symbol, if defined, indicates that sitecustomize should
- * be used.
- */
-#$usesitecustomize USE_SITECUSTOMIZE /**/
-
/* Size_t_size:
* This symbol holds the size of a Size_t in bytes.
*/
-#define Size_t_size $sizesize /* */
+#define Size_t_size $sizesize /**/
/* Size_t:
* This symbol holds the type used to declare length parameters
* unsigned long, int, etc. It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
-#define Size_t $sizetype /* length paramater for string functions */
+#define Size_t $sizetype /* length parameter for string functions */
/* Sock_size_t:
* This symbol holds the type used for the size argument of
*/
#define SSize_t $ssizetype /* signed count of bytes */
-/* STARTPERL:
- * This variable contains the string to put in front of a perl
- * script to make sure (one hopes) that it runs with perl and not
- * some shell.
- */
-#define STARTPERL "$startperl" /**/
-
/* STDCHAR:
* This symbol is defined to be the type of char used in stdio.h.
* It has the values "unsigned char" or "char".
*/
#define STDCHAR $stdchar /**/
-/* HAS_STDIO_STREAM_ARRAY:
- * This symbol, if defined, tells that there is an array
- * holding the stdio streams.
- */
-/* STDIO_STREAM_ARRAY:
- * This symbol tells the name of the array holding the stdio streams.
- * Usual values include _iob, __iob, and __sF.
- */
-#$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY /**/
-#define STDIO_STREAM_ARRAY $stdio_stream_array
-
/* Uid_t_f:
* This symbol defines the format string used for printing a Uid_t.
*/
#define Uid_t_f $uidformat /**/
/* Uid_t_sign:
- * This symbol holds the signedess of a Uid_t.
+ * This symbol holds the signedness of a Uid_t.
* 1 for unsigned, -1 for signed.
*/
#define Uid_t_sign $uidsign /* UID sign */
*/
#define Uid_t $uidtype /* UID type */
-/* USE_64_BIT_INT:
- * This symbol, if defined, indicates that 64-bit integers should
- * be used when available. If not defined, the native integers
- * will be employed (be they 32 or 64 bits). The minimal possible
- * 64-bitness is used, just enough to get 64-bit integers into Perl.
- * This may mean using for example "long longs", while your memory
- * may still be limited to 2 gigabytes.
- */
-/* USE_64_BIT_ALL:
- * This symbol, if defined, indicates that 64-bit integers should
- * be used when available. If not defined, the native integers
- * will be used (be they 32 or 64 bits). The maximal possible
- * 64-bitness is employed: LP64 or ILP64, meaning that you will
- * be able to use more than 2 gigabytes of memory. This mode is
- * even more binary incompatible than USE_64_BIT_INT. You may not
- * be able to run the resulting executable in a 32-bit CPU at all or
- * you may need at least to reboot your OS to 64-bit mode.
- */
-#ifndef USE_64_BIT_INT
-#$use64bitint USE_64_BIT_INT /**/
-#endif
-
-#ifndef USE_64_BIT_ALL
-#$use64bitall USE_64_BIT_ALL /**/
-#endif
-
-/* USE_LARGE_FILES:
- * This symbol, if defined, indicates that large file support
- * should be used when available.
- */
-#ifndef USE_LARGE_FILES
-#$uselargefiles USE_LARGE_FILES /**/
-#endif
-
-/* USE_LONG_DOUBLE:
- * This symbol, if defined, indicates that long doubles should
- * be used when available.
- */
-#ifndef USE_LONG_DOUBLE
-#$uselongdouble USE_LONG_DOUBLE /**/
-#endif
-
-/* USE_MORE_BITS:
- * This symbol, if defined, indicates that 64-bit interfaces and
- * long doubles should be used when available.
- */
-#ifndef USE_MORE_BITS
-#$usemorebits USE_MORE_BITS /**/
-#endif
-
-/* MULTIPLICITY:
- * This symbol, if defined, indicates that Perl should
- * be built to use multiplicity.
- */
-#ifndef MULTIPLICITY
-#$usemultiplicity MULTIPLICITY /**/
-#endif
-
-/* USE_PERLIO:
- * This symbol, if defined, indicates that the PerlIO abstraction should
- * be used throughout. If not defined, stdio should be
- * used in a fully backward compatible manner.
- */
-#ifndef USE_PERLIO
-#$useperlio USE_PERLIO /**/
-#endif
-
-/* USE_SOCKS:
- * This symbol, if defined, indicates that Perl should
- * be built to use socks.
- */
-#ifndef USE_SOCKS
-#$usesocks USE_SOCKS /**/
-#endif
-
/* USE_ITHREADS:
* This symbol, if defined, indicates that Perl should be built to
* use the interpreter-based threading implementation.
/* USE_5005THREADS:
* This symbol, if defined, indicates that Perl should be built to
* use the 5.005-based threading implementation.
+ * Only valid up to 5.8.x.
*/
/* OLD_PTHREADS_API:
* This symbol, if defined, indicates that Perl should
* If defined, this symbol contains the name of a private library.
* The library is private in the sense that it needn't be in anyone's
* execution path, but it should be accessible by the world.
- * It may have a ~ on the front.
+ * It may have a ~ on the front.
* The standard distribution will put nothing in this directory.
* Vendors who distribute perl may wish to place their own
* architecture-dependent modules and extensions in this directory with
- * MakeMaker Makefile.PL INSTALLDIRS=vendor
+ * MakeMaker Makefile.PL INSTALLDIRS=vendor
* or equivalent. See INSTALL for details.
*/
/* PERL_VENDORARCH_EXP:
* 2 = supports arrays of pointers to functions returning void
* 4 = supports comparisons between pointers to void functions and
* addresses of void functions
- * 8 = suports declaration of generic void pointers
+ * 8 = supports declaration of generic void pointers
*
* The package designer should define VOIDUSED to indicate the requirements
* of the package. This can be done either by #defining VOIDUSED before
#define M_VOID /* Xenix strikes again */
#endif
-/* HASATTRIBUTE:
- * This symbol indicates the C compiler can check for function attributes,
- * such as printf formats. This is normally only supported by GNU cc.
+/* PERL_USE_DEVEL:
+ * This symbol, if defined, indicates that Perl was configured with
+ * -Dusedevel, to enable development features. This should not be
+ * done for production builds.
*/
-#$d_attribut HASATTRIBUTE /**/
-#ifndef HASATTRIBUTE
-#ifdef __attribute__
-#undef __attribute__
-#endif
-#define __attribute__(_arg_)
-#endif
+#$usedevel PERL_USE_DEVEL /**/
-/* HAS_CRYPT:
- * This symbol, if defined, indicates that the crypt routine is available
- * to encrypt passwords and the like.
+/* HAS_ATOLF:
+ * This symbol, if defined, indicates that the atolf routine is
+ * available to convert strings into long doubles.
*/
-#$d_crypt HAS_CRYPT /**/
+#$d_atolf HAS_ATOLF /**/
-/* SETUID_SCRIPTS_ARE_SECURE_NOW:
- * This symbol, if defined, indicates that the bug that prevents
- * setuid scripts from being secure is not present in this kernel.
- */
-/* DOSUID:
- * This symbol, if defined, indicates that the C program should
- * check the script that it is executing for setuid/setgid bits, and
- * attempt to emulate setuid/setgid on systems that have disabled
- * setuid #! scripts because the kernel can't do it securely.
- * It is up to the package designer to make sure that this emulation
- * is done securely. Among other things, it should do an fstat on
- * the script it just opened to make sure it really is a setuid/setgid
- * script, it should make sure the arguments passed correspond exactly
- * to the argument on the #! line, and it should not trust any
- * subprocesses to which it must pass the filename rather than the
- * file descriptor of the script to be executed.
+/* HAS_ATOLL:
+ * This symbol, if defined, indicates that the atoll routine is
+ * available to convert strings into long longs.
*/
-#$d_suidsafe SETUID_SCRIPTS_ARE_SECURE_NOW /**/
-#$d_dosuid DOSUID /**/
+#$d_atoll HAS_ATOLL /**/
-/* Shmat_t:
- * This symbol holds the return type of the shmat() system call.
- * Usually set to 'void *' or 'char *'.
- */
-/* HAS_SHMAT_PROTOTYPE:
- * This symbol, if defined, indicates that the sys/shm.h includes
- * a prototype for shmat(). Otherwise, it is up to the program to
- * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess,
- * but not always right so it should be emitted by the program only
- * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
+/* HAS__FWALK:
+ * This symbol, if defined, indicates that the _fwalk system call is
+ * available to apply a function to all the file handles.
*/
-#define Shmat_t $shmattype /**/
-#$d_shmatprototype HAS_SHMAT_PROTOTYPE /**/
+#$d__fwalk HAS__FWALK /**/
-/* I_NDBM:
- * This symbol, if defined, indicates that <ndbm.h> exists and should
- * be included.
+/* HAS_AINTL:
+ * This symbol, if defined, indicates that the aintl routine is
+ * available. If copysignl is also present we can emulate modfl.
*/
-#$i_ndbm I_NDBM /**/
+#$d_aintl HAS_AINTL /**/
-/* I_STDARG:
- * This symbol, if defined, indicates that <stdarg.h> exists and should
- * be included.
+/* HAS_BUILTIN_CHOOSE_EXPR:
+ * Can we handle GCC builtin for compile-time ternary-like expressions
*/
-/* I_VARARGS:
- * This symbol, if defined, indicates to the C program that it should
- * include <varargs.h>.
+/* HAS_BUILTIN_EXPECT:
+ * Can we handle GCC builtin for telling that certain values are more
+ * likely
*/
-#$i_stdarg I_STDARG /**/
-#$i_varargs I_VARARGS /**/
+#$d_builtin_expect HAS_BUILTIN_EXPECT /**/
+#$d_builtin_choose_expr HAS_BUILTIN_CHOOSE_EXPR /**/
-/* CAN_PROTOTYPE:
- * If defined, this macro indicates that the C compiler can handle
- * function prototypes.
- */
-/* _:
- * This macro is used to declare function parameters for folks who want
- * to make declarations with prototypes using a different style than
- * the above macros. Use double parentheses. For example:
- *
- * int main _((int argc, char *argv[]));
+/* HAS_C99_VARIADIC_MACROS:
+ * If defined, the compiler supports C99 variadic macros.
*/
-#$prototype CAN_PROTOTYPE /**/
-#ifdef CAN_PROTOTYPE
-#define _(args) args
-#else
-#define _(args) ()
-#endif
+#$d_c99_variadic_macros HAS_C99_VARIADIC_MACROS /**/
-/* SH_PATH:
- * This symbol contains the full pathname to the shell used on this
- * on this system to execute Bourne shell scripts. Usually, this will be
- * /bin/sh, though it's possible that some systems will have /bin/ksh,
- * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
- * D:/bin/sh.exe.
+/* HAS_CLASS:
+ * This symbol, if defined, indicates that the class routine is
+ * available to classify doubles. Available for example in AIX.
+ * The returned values are defined in <float.h> and are:
+ *
+ * FP_PLUS_NORM Positive normalized, nonzero
+ * FP_MINUS_NORM Negative normalized, nonzero
+ * FP_PLUS_DENORM Positive denormalized, nonzero
+ * FP_MINUS_DENORM Negative denormalized, nonzero
+ * FP_PLUS_ZERO +0.0
+ * FP_MINUS_ZERO -0.0
+ * FP_PLUS_INF +INF
+ * FP_MINUS_INF -INF
+ * FP_NANS Signaling Not a Number (NaNS)
+ * FP_NANQ Quiet Not a Number (NaNQ)
*/
-#define SH_PATH "$sh" /**/
+#$d_class HAS_CLASS /**/
-/* USE_CROSS_COMPILE:
- * This symbol, if defined, indicates that Perl is being cross-compiled.
- */
-/* PERL_TARGETARCH:
- * This symbol, if defined, indicates the target architecture
- * Perl has been cross-compiled to. Undefined if not a cross-compile.
+/* HAS_CLEARENV:
+ * This symbol, if defined, indicates that the clearenv () routine is
+ * available for use.
*/
-#ifndef USE_CROSS_COMPILE
-#$usecrosscompile USE_CROSS_COMPILE /**/
-#define PERL_TARGETARCH "$targetarch" /**/
-#endif
+#$d_clearenv HAS_CLEARENV /**/
-/* HAS_AINTL:
- * This symbol, if defined, indicates that the aintl routine is
- * available. If copysignl is also present we can emulate modfl.
+/* HAS_STRUCT_CMSGHDR:
+ * This symbol, if defined, indicates that the struct cmsghdr
+ * is supported.
*/
-#$d_aintl HAS_AINTL /**/
+#$d_cmsghdr_s HAS_STRUCT_CMSGHDR /**/
/* HAS_COPYSIGNL:
* This symbol, if defined, indicates that the copysignl routine is
*/
#$d_copysignl HAS_COPYSIGNL /**/
+/* USE_CPLUSPLUS:
+ * This symbol, if defined, indicates that a C++ compiler was
+ * used to compiled Perl and will be used to compile extensions.
+ */
+#$d_cplusplus USE_CPLUSPLUS /**/
+
/* HAS_DBMINIT_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the dbminit() function. Otherwise, it is up
*/
#$d_dbminitproto HAS_DBMINIT_PROTO /**/
+/* HAS_DIR_DD_FD:
+ * This symbol, if defined, indicates that the the DIR* dirstream
+ * structure contains a member variable named dd_fd.
+ */
+#$d_dir_dd_fd HAS_DIR_DD_FD /**/
+
/* HAS_DIRFD:
* This manifest constant lets the C program know that dirfd
* is available.
*/
#$d_dirfd HAS_DIRFD /**/
+/* DLSYM_NEEDS_UNDERSCORE:
+ * This symbol, if defined, indicates that we need to prepend an
+ * underscore to the symbol name before calling dlsym(). This only
+ * makes sense if you *have* dlsym, which we will presume is the
+ * case if you're using dl_dlopen.xs.
+ */
+#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/
+
/* HAS_FAST_STDIO:
* This symbol, if defined, indicates that the "fast stdio"
* is available to manipulate the stdio buffers directly.
*/
#$d_faststdio HAS_FAST_STDIO /**/
+/* HAS_FCHDIR:
+ * This symbol, if defined, indicates that the fchdir routine is
+ * available to change directory using a file descriptor.
+ */
+#$d_fchdir HAS_FCHDIR /**/
+
+/* FCNTL_CAN_LOCK:
+ * This symbol, if defined, indicates that fcntl() can be used
+ * for file locking. Normally on Unix systems this is defined.
+ * It may be undefined on VMS.
+ */
+#$d_fcntl_can_lock FCNTL_CAN_LOCK /**/
+
+/* HAS_FINITE:
+ * This symbol, if defined, indicates that the finite routine is
+ * available to check whether a double is finite (non-infinity non-NaN).
+ */
+#$d_finite HAS_FINITE /**/
+
+/* HAS_FINITEL:
+ * This symbol, if defined, indicates that the finitel routine is
+ * available to check whether a long double is finite
+ * (non-infinity non-NaN).
+ */
+#$d_finitel HAS_FINITEL /**/
+
/* HAS_FLOCK_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the flock() function. Otherwise, it is up
*/
#$d_flockproto HAS_FLOCK_PROTO /**/
-/* HAS_FPCLASSL:
- * This symbol, if defined, indicates that the fpclassl routine is
- * available to classify long doubles. Available for example in IRIX.
- * The returned values are defined in <ieeefp.h> and are:
- *
- * FP_SNAN signaling NaN
- * FP_QNAN quiet NaN
+/* HAS_FP_CLASS:
+ * This symbol, if defined, indicates that the fp_class routine is
+ * available to classify doubles. Available for example in Digital UNIX.
+ * The returned values are defined in <math.h> and are:
+ *
+ * FP_SNAN Signaling NaN (Not-a-Number)
+ * FP_QNAN Quiet NaN (Not-a-Number)
+ * FP_POS_INF +infinity
+ * FP_NEG_INF -infinity
+ * FP_POS_NORM Positive normalized
+ * FP_NEG_NORM Negative normalized
+ * FP_POS_DENORM Positive denormalized
+ * FP_NEG_DENORM Negative denormalized
+ * FP_POS_ZERO +0.0 (positive zero)
+ * FP_NEG_ZERO -0.0 (negative zero)
+ */
+#$d_fp_class HAS_FP_CLASS /**/
+
+/* HAS_FPCLASS:
+ * This symbol, if defined, indicates that the fpclass routine is
+ * available to classify doubles. Available for example in Solaris/SVR4.
+ * The returned values are defined in <ieeefp.h> and are:
+ *
+ * FP_SNAN signaling NaN
+ * FP_QNAN quiet NaN
* FP_NINF negative infinity
* FP_PINF positive infinity
* FP_NDENORM negative denormalized non-zero
* FP_NNORM negative normalized non-zero
* FP_PNORM positive normalized non-zero
*/
-#$d_fpclassl HAS_FPCLASSL /**/
+#$d_fpclass HAS_FPCLASS /**/
-/* HAS_ILOGBL:
- * This symbol, if defined, indicates that the ilogbl routine is
- * available. If scalbnl is also present we can emulate frexpl.
+/* HAS_FPCLASSIFY:
+ * This symbol, if defined, indicates that the fpclassify routine is
+ * available to classify doubles. Available for example in HP-UX.
+ * The returned values are defined in <math.h> and are
+ *
+ * FP_NORMAL Normalized
+ * FP_ZERO Zero
+ * FP_INFINITE Infinity
+ * FP_SUBNORMAL Denormalized
+ * FP_NAN NaN
+ *
*/
-#$d_ilogbl HAS_ILOGBL /**/
+#$d_fpclassify HAS_FPCLASSIFY /**/
-/* HAS_NL_LANGINFO:
- * This symbol, if defined, indicates that the nl_langinfo routine is
- * available to return local data. You will also need <langinfo.h>
- * and therefore I_LANGINFO.
+/* HAS_FPCLASSL:
+ * This symbol, if defined, indicates that the fpclassl routine is
+ * available to classify long doubles. Available for example in IRIX.
+ * The returned values are defined in <ieeefp.h> and are:
+ *
+ * FP_SNAN signaling NaN
+ * FP_QNAN quiet NaN
+ * FP_NINF negative infinity
+ * FP_PINF positive infinity
+ * FP_NDENORM negative denormalized non-zero
+ * FP_PDENORM positive denormalized non-zero
+ * FP_NZERO negative zero
+ * FP_PZERO positive zero
+ * FP_NNORM negative normalized non-zero
+ * FP_PNORM positive normalized non-zero
*/
-#$d_nl_langinfo HAS_NL_LANGINFO /**/
+#$d_fpclassl HAS_FPCLASSL /**/
-/* HAS_PROCSELFEXE:
- * This symbol is defined if PROCSELFEXE_PATH is a symlink
- * to the absolute pathname of the executing program.
- */
-/* PROCSELFEXE_PATH:
- * If HAS_PROCSELFEXE is defined this symbol is the filename
- * of the symbolic link pointing to the absolute pathname of
- * the executing program.
+/* HAS_FPOS64_T:
+ * This symbol will be defined if the C compiler supports fpos64_t.
*/
-#$d_procselfexe HAS_PROCSELFEXE /**/
-#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH)
-#define PROCSELFEXE_PATH $procselfexe /**/
-#endif
+#$d_fpos64_t HAS_FPOS64_T /**/
-/* HAS_PTHREAD_ATTR_SETSCOPE:
- * This symbol, if defined, indicates that the pthread_attr_setscope
- * system call is available to set the contention scope attribute of
- * a thread attribute object.
+/* HAS_FREXPL:
+ * This symbol, if defined, indicates that the frexpl routine is
+ * available to break a long double floating-point number into
+ * a normalized fraction and an integral power of 2.
*/
-#$d_pthread_attr_setscope HAS_PTHREAD_ATTR_SETSCOPE /**/
+#$d_frexpl HAS_FREXPL /**/
-/* HAS_SCALBNL:
- * This symbol, if defined, indicates that the scalbnl routine is
- * available. If ilogbl is also present we can emulate frexpl.
+/* HAS_STRUCT_FS_DATA:
+ * This symbol, if defined, indicates that the struct fs_data
+ * to do statfs() is supported.
*/
-#$d_scalbnl HAS_SCALBNL /**/
+#$d_fs_data_s HAS_STRUCT_FS_DATA /**/
-/* HAS_SIGPROCMASK:
- * This symbol, if defined, indicates that the sigprocmask
- * system call is available to examine or change the signal mask
- * of the calling process.
+/* HAS_FSEEKO:
+ * This symbol, if defined, indicates that the fseeko routine is
+ * available to fseek beyond 32 bits (useful for ILP32 hosts).
*/
-#$d_sigprocmask HAS_SIGPROCMASK /**/
+#$d_fseeko HAS_FSEEKO /**/
-/* HAS_SOCKATMARK:
- * This symbol, if defined, indicates that the sockatmark routine is
- * available to test whether a socket is at the out-of-band mark.
+/* HAS_FSTATFS:
+ * This symbol, if defined, indicates that the fstatfs routine is
+ * available to stat filesystems by file descriptors.
*/
-#$d_sockatmark HAS_SOCKATMARK /**/
+#$d_fstatfs HAS_FSTATFS /**/
-/* HAS_SOCKATMARK_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the sockatmark() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern int sockatmark(int);
+/* HAS_FSYNC:
+ * This symbol, if defined, indicates that the fsync routine is
+ * available to write a file's modified data and attributes to
+ * permanent storage.
*/
-#$d_sockatmarkproto HAS_SOCKATMARK_PROTO /**/
+#$d_fsync HAS_FSYNC /**/
-/* HAS_SETRESGID_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the setresgid() function. Otherwise, it is up
- * to the program to supply one. Good guesses are
- * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);
+/* HAS_FTELLO:
+ * This symbol, if defined, indicates that the ftello routine is
+ * available to ftell beyond 32 bits (useful for ILP32 hosts).
*/
-#$d_sresgproto HAS_SETRESGID_PROTO /**/
+#$d_ftello HAS_FTELLO /**/
-/* HAS_SETRESUID_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the setresuid() function. Otherwise, it is up
- * to the program to supply one. Good guesses are
- * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);
+/* HAS_FUTIMES:
+ * This symbol, if defined, indicates that the futimes routine is
+ * available to change file descriptor time stamps with struct timevals.
*/
-#$d_sresuproto HAS_SETRESUID_PROTO /**/
+#$d_futimes HAS_FUTIMES /**/
-/* HAS_STRFTIME:
- * This symbol, if defined, indicates that the strftime routine is
- * available to do time formatting.
+/* HAS_GETADDRINFO:
+ * This symbol, if defined, indicates that the getaddrinfo() function
+ * is available for use.
*/
-#$d_strftime HAS_STRFTIME /**/
+#$d_getaddrinfo HAS_GETADDRINFO /**/
-/* HAS_SYSCALL_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the syscall() function. Otherwise, it is up
- * to the program to supply one. Good guesses are
- * extern int syscall(int, ...);
- * extern int syscall(long, ...);
+/* HAS_GETCWD:
+ * This symbol, if defined, indicates that the getcwd routine is
+ * available to get the current working directory.
*/
-#$d_syscallproto HAS_SYSCALL_PROTO /**/
+#$d_getcwd HAS_GETCWD /**/
-/* U32_ALIGNMENT_REQUIRED:
- * This symbol, if defined, indicates that you must access
- * character data through U32-aligned pointers.
+/* HAS_GETESPWNAM:
+ * This symbol, if defined, indicates that the getespwnam system call is
+ * available to retrieve enhanced (shadow) password entries by name.
*/
-#ifndef U32_ALIGNMENT_REQUIRED
-#$d_u32align U32_ALIGNMENT_REQUIRED /**/
-#endif
+#$d_getespwnam HAS_GETESPWNAM /**/
-/* HAS_USLEEP_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the usleep() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern int usleep(useconds_t);
+/* HAS_GETFSSTAT:
+ * This symbol, if defined, indicates that the getfsstat routine is
+ * available to stat filesystems in bulk.
*/
-#$d_usleepproto HAS_USLEEP_PROTO /**/
+#$d_getfsstat HAS_GETFSSTAT /**/
-/* I_CRYPT:
- * This symbol, if defined, indicates that <crypt.h> exists and
- * should be included.
+/* HAS_GETITIMER:
+ * This symbol, if defined, indicates that the getitimer routine is
+ * available to return interval timers.
*/
-#$i_crypt I_CRYPT /**/
+#$d_getitimer HAS_GETITIMER /**/
-/* I_FP:
- * This symbol, if defined, indicates that <fp.h> exists and
- * should be included.
+/* HAS_GETMNT:
+ * This symbol, if defined, indicates that the getmnt routine is
+ * available to get filesystem mount info by filename.
*/
-#$i_fp I_FP /**/
+#$d_getmnt HAS_GETMNT /**/
-/* I_LANGINFO:
- * This symbol, if defined, indicates that <langinfo.h> exists and
- * should be included.
+/* HAS_GETMNTENT:
+ * This symbol, if defined, indicates that the getmntent routine is
+ * available to iterate through mounted file systems to get their info.
*/
-#$i_langinfo I_LANGINFO /**/
+#$d_getmntent HAS_GETMNTENT /**/
-/* USE_FAST_STDIO:
- * This symbol, if defined, indicates that Perl should
- * be built to use 'fast stdio'.
- * Defaults to define in Perls 5.8 and earlier, to undef later.
+/* HAS_GETNAMEINFO:
+ * This symbol, if defined, indicates that the getnameinfo() function
+ * is available for use.
*/
-#ifndef USE_FAST_STDIO
-#$usefaststdio USE_FAST_STDIO /**/
-#endif
+#$d_getnameinfo HAS_GETNAMEINFO /**/
-/* HAS_CTERMID_R:
- * This symbol, if defined, indicates that the ctermid_r routine
- * is available to ctermid re-entrantly.
+/* HAS_GETPRPWNAM:
+ * This symbol, if defined, indicates that the getprpwnam system call is
+ * available to retrieve protected (shadow) password entries by name.
*/
-/* CTERMID_R_PROTO:
- * This symbol encodes the prototype of ctermid_r.
- * It is zero if d_ctermid_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctermid_r
- * is defined.
+#$d_getprpwnam HAS_GETPRPWNAM /**/
+
+/* HAS_GETSPNAM:
+ * This symbol, if defined, indicates that the getspnam system call is
+ * available to retrieve SysV shadow password entries by name.
*/
-#$d_ctermid_r HAS_CTERMID_R /**/
-#define CTERMID_R_PROTO $ctermid_r_proto /**/
+#$d_getspnam HAS_GETSPNAM /**/
-/* HAS_ENDHOSTENT_R:
- * This symbol, if defined, indicates that the endhostent_r routine
- * is available to endhostent re-entrantly.
+/* HAS_HASMNTOPT:
+ * This symbol, if defined, indicates that the hasmntopt routine is
+ * available to query the mount options of file systems.
*/
-/* ENDHOSTENT_R_PROTO:
- * This symbol encodes the prototype of endhostent_r.
- * It is zero if d_endhostent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endhostent_r
- * is defined.
+#$d_hasmntopt HAS_HASMNTOPT /**/
+
+/* HAS_ILOGBL:
+ * This symbol, if defined, indicates that the ilogbl routine is
+ * available. If scalbnl is also present we can emulate frexpl.
*/
-#$d_endhostent_r HAS_ENDHOSTENT_R /**/
-#define ENDHOSTENT_R_PROTO $endhostent_r_proto /**/
+#$d_ilogbl HAS_ILOGBL /**/
-/* HAS_ENDNETENT_R:
- * This symbol, if defined, indicates that the endnetent_r routine
- * is available to endnetent re-entrantly.
+/* HAS_INETNTOP:
+ * This symbol, if defined, indicates that the inet_ntop() function
+ * is available to parse IPv4 and IPv6 strings.
*/
-/* ENDNETENT_R_PROTO:
- * This symbol encodes the prototype of endnetent_r.
- * It is zero if d_endnetent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endnetent_r
- * is defined.
+#$d_inetntop HAS_INETNTOP /**/
+
+/* HAS_INETPTON:
+ * This symbol, if defined, indicates that the inet_pton() function
+ * is available to parse IPv4 and IPv6 strings.
*/
-#$d_endnetent_r HAS_ENDNETENT_R /**/
-#define ENDNETENT_R_PROTO $endnetent_r_proto /**/
+#$d_inetpton HAS_INETPTON /**/
-/* HAS_ENDPROTOENT_R:
- * This symbol, if defined, indicates that the endprotoent_r routine
- * is available to endprotoent re-entrantly.
- */
-/* ENDPROTOENT_R_PROTO:
- * This symbol encodes the prototype of endprotoent_r.
- * It is zero if d_endprotoent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endprotoent_r
- * is defined.
+/* HAS_INT64_T:
+ * This symbol will defined if the C compiler supports int64_t.
+ * Usually the <inttypes.h> needs to be included, but sometimes
+ * <sys/types.h> is enough.
*/
-#$d_endprotoent_r HAS_ENDPROTOENT_R /**/
-#define ENDPROTOENT_R_PROTO $endprotoent_r_proto /**/
+#$d_int64_t HAS_INT64_T /**/
-/* HAS_ENDSERVENT_R:
- * This symbol, if defined, indicates that the endservent_r routine
- * is available to endservent re-entrantly.
- */
-/* ENDSERVENT_R_PROTO:
- * This symbol encodes the prototype of endservent_r.
- * It is zero if d_endservent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endservent_r
- * is defined.
+/* HAS_ISBLANK:
+ * This manifest constant lets the C program know that isblank
+ * is available.
*/
-#$d_endservent_r HAS_ENDSERVENT_R /**/
-#define ENDSERVENT_R_PROTO $endservent_r_proto /**/
+#$d_isblank HAS_ISBLANK /**/
-/* HAS_GETHOSTBYADDR_R:
- * This symbol, if defined, indicates that the gethostbyaddr_r routine
- * is available to gethostbyaddr re-entrantly.
- */
-/* GETHOSTBYADDR_R_PROTO:
- * This symbol encodes the prototype of gethostbyaddr_r.
- * It is zero if d_gethostbyaddr_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyaddr_r
- * is defined.
+/* HAS_ISFINITE:
+ * This symbol, if defined, indicates that the isfinite routine is
+ * available to check whether a double is finite (non-infinity non-NaN).
*/
-#$d_gethostbyaddr_r HAS_GETHOSTBYADDR_R /**/
-#define GETHOSTBYADDR_R_PROTO $gethostbyaddr_r_proto /**/
+#$d_isfinite HAS_ISFINITE /**/
-/* HAS_GETHOSTBYNAME_R:
- * This symbol, if defined, indicates that the gethostbyname_r routine
- * is available to gethostbyname re-entrantly.
+/* HAS_ISINF:
+ * This symbol, if defined, indicates that the isinf routine is
+ * available to check whether a double is an infinity.
*/
-/* GETHOSTBYNAME_R_PROTO:
- * This symbol encodes the prototype of gethostbyname_r.
- * It is zero if d_gethostbyname_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyname_r
- * is defined.
+#$d_isinf HAS_ISINF /**/
+
+/* HAS_ISNAN:
+ * This symbol, if defined, indicates that the isnan routine is
+ * available to check whether a double is a NaN.
*/
-#$d_gethostbyname_r HAS_GETHOSTBYNAME_R /**/
-#define GETHOSTBYNAME_R_PROTO $gethostbyname_r_proto /**/
+#$d_isnan HAS_ISNAN /**/
-/* HAS_GETHOSTENT_R:
- * This symbol, if defined, indicates that the gethostent_r routine
- * is available to gethostent re-entrantly.
+/* HAS_ISNANL:
+ * This symbol, if defined, indicates that the isnanl routine is
+ * available to check whether a long double is a NaN.
*/
-/* GETHOSTENT_R_PROTO:
- * This symbol encodes the prototype of gethostent_r.
- * It is zero if d_gethostent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostent_r
- * is defined.
+#$d_isnanl HAS_ISNANL /**/
+
+/* HAS_LDBL_DIG:
+ * This symbol, if defined, indicates that this system's <float.h>
+ * or <limits.h> defines the symbol LDBL_DIG, which is the number
+ * of significant digits in a long double precision number. Unlike
+ * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
*/
-#$d_gethostent_r HAS_GETHOSTENT_R /**/
-#define GETHOSTENT_R_PROTO $gethostent_r_proto /**/
+#$d_ldbl_dig HAS_LDBL_DIG /* */
-/* HAS_GETNETBYADDR_R:
- * This symbol, if defined, indicates that the getnetbyaddr_r routine
- * is available to getnetbyaddr re-entrantly.
+/* LIBM_LIB_VERSION:
+ * This symbol, if defined, indicates that libm exports _LIB_VERSION
+ * and that math.h defines the enum to manipulate it.
*/
-/* GETNETBYADDR_R_PROTO:
- * This symbol encodes the prototype of getnetbyaddr_r.
- * It is zero if d_getnetbyaddr_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyaddr_r
- * is defined.
+#$d_libm_lib_version LIBM_LIB_VERSION /**/
+
+/* HAS_MADVISE:
+ * This symbol, if defined, indicates that the madvise system call is
+ * available to map a file into memory.
*/
-#$d_getnetbyaddr_r HAS_GETNETBYADDR_R /**/
-#define GETNETBYADDR_R_PROTO $getnetbyaddr_r_proto /**/
+#$d_madvise HAS_MADVISE /**/
-/* HAS_GETNETBYNAME_R:
- * This symbol, if defined, indicates that the getnetbyname_r routine
- * is available to getnetbyname re-entrantly.
+/* HAS_MALLOC_SIZE:
+ * This symbol, if defined, indicates that the malloc_size
+ * routine is available for use.
*/
-/* GETNETBYNAME_R_PROTO:
- * This symbol encodes the prototype of getnetbyname_r.
- * It is zero if d_getnetbyname_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyname_r
- * is defined.
+#$d_malloc_size HAS_MALLOC_SIZE /**/
+
+/* HAS_MALLOC_GOOD_SIZE:
+ * This symbol, if defined, indicates that the malloc_good_size
+ * routine is available for use.
*/
-#$d_getnetbyname_r HAS_GETNETBYNAME_R /**/
-#define GETNETBYNAME_R_PROTO $getnetbyname_r_proto /**/
+#$d_malloc_good_size HAS_MALLOC_GOOD_SIZE /**/
-/* HAS_GETNETENT_R:
- * This symbol, if defined, indicates that the getnetent_r routine
- * is available to getnetent re-entrantly.
+/* HAS_MKDTEMP:
+ * This symbol, if defined, indicates that the mkdtemp routine is
+ * available to exclusively create a uniquely named temporary directory.
*/
-/* GETNETENT_R_PROTO:
- * This symbol encodes the prototype of getnetent_r.
- * It is zero if d_getnetent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetent_r
- * is defined.
+#$d_mkdtemp HAS_MKDTEMP /**/
+
+/* HAS_MKSTEMPS:
+ * This symbol, if defined, indicates that the mkstemps routine is
+ * available to exclusively create and open a uniquely named
+ * (with a suffix) temporary file.
*/
-#$d_getnetent_r HAS_GETNETENT_R /**/
-#define GETNETENT_R_PROTO $getnetent_r_proto /**/
+#$d_mkstemps HAS_MKSTEMPS /**/
-/* HAS_GETPROTOBYNAME_R:
- * This symbol, if defined, indicates that the getprotobyname_r routine
- * is available to getprotobyname re-entrantly.
+/* HAS_MODFL:
+ * This symbol, if defined, indicates that the modfl routine is
+ * available to split a long double x into a fractional part f and
+ * an integer part i such that |f| < 1.0 and (f + i) = x.
*/
-/* GETPROTOBYNAME_R_PROTO:
- * This symbol encodes the prototype of getprotobyname_r.
- * It is zero if d_getprotobyname_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobyname_r
- * is defined.
+/* HAS_MODFL_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the modfl() function. Otherwise, it is up
+ * to the program to supply one.
*/
-#$d_getprotobyname_r HAS_GETPROTOBYNAME_R /**/
-#define GETPROTOBYNAME_R_PROTO $getprotobyname_r_proto /**/
+/* HAS_MODFL_POW32_BUG:
+ * This symbol, if defined, indicates that the modfl routine is
+ * broken for long doubles >= pow(2, 32).
+ * For example from 4294967303.150000 one would get 4294967302.000000
+ * and 1.150000. The bug has been seen in certain versions of glibc,
+ * release 2.2.2 is known to be okay.
+ */
+#$d_modfl HAS_MODFL /**/
+#$d_modflproto HAS_MODFL_PROTO /**/
+#$d_modfl_pow32_bug HAS_MODFL_POW32_BUG /**/
-/* HAS_GETPROTOBYNUMBER_R:
- * This symbol, if defined, indicates that the getprotobynumber_r routine
- * is available to getprotobynumber re-entrantly.
+/* HAS_MPROTECT:
+ * This symbol, if defined, indicates that the mprotect system call is
+ * available to modify the access protection of a memory mapped file.
*/
-/* GETPROTOBYNUMBER_R_PROTO:
- * This symbol encodes the prototype of getprotobynumber_r.
- * It is zero if d_getprotobynumber_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobynumber_r
- * is defined.
+#$d_mprotect HAS_MPROTECT /**/
+
+/* HAS_STRUCT_MSGHDR:
+ * This symbol, if defined, indicates that the struct msghdr
+ * is supported.
*/
-#$d_getprotobynumber_r HAS_GETPROTOBYNUMBER_R /**/
-#define GETPROTOBYNUMBER_R_PROTO $getprotobynumber_r_proto /**/
+#$d_msghdr_s HAS_STRUCT_MSGHDR /**/
-/* HAS_GETPROTOENT_R:
- * This symbol, if defined, indicates that the getprotoent_r routine
- * is available to getprotoent re-entrantly.
+/* HAS_NL_LANGINFO:
+ * This symbol, if defined, indicates that the nl_langinfo routine is
+ * available to return local data. You will also need <langinfo.h>
+ * and therefore I_LANGINFO.
*/
-/* GETPROTOENT_R_PROTO:
- * This symbol encodes the prototype of getprotoent_r.
- * It is zero if d_getprotoent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotoent_r
- * is defined.
+#$d_nl_langinfo HAS_NL_LANGINFO /**/
+
+/* HAS_OFF64_T:
+ * This symbol will be defined if the C compiler supports off64_t.
*/
-#$d_getprotoent_r HAS_GETPROTOENT_R /**/
-#define GETPROTOENT_R_PROTO $getprotoent_r_proto /**/
+#$d_off64_t HAS_OFF64_T /**/
-/* HAS_GETSERVBYNAME_R:
- * This symbol, if defined, indicates that the getservbyname_r routine
- * is available to getservbyname re-entrantly.
+/* HAS_PRCTL:
+ * This symbol, if defined, indicates that the prctl routine is
+ * available to set process title.
*/
-/* GETSERVBYNAME_R_PROTO:
- * This symbol encodes the prototype of getservbyname_r.
- * It is zero if d_getservbyname_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyname_r
- * is defined.
+/* HAS_PRCTL_SET_NAME:
+ * This symbol, if defined, indicates that the prctl routine is
+ * available to set process title and supports PR_SET_NAME.
*/
-#$d_getservbyname_r HAS_GETSERVBYNAME_R /**/
-#define GETSERVBYNAME_R_PROTO $getservbyname_r_proto /**/
+#$d_prctl HAS_PRCTL /**/
+#$d_prctl_set_name HAS_PRCTL_SET_NAME /**/
-/* HAS_GETSERVBYPORT_R:
- * This symbol, if defined, indicates that the getservbyport_r routine
- * is available to getservbyport re-entrantly.
+/* HAS_PROCSELFEXE:
+ * This symbol is defined if PROCSELFEXE_PATH is a symlink
+ * to the absolute pathname of the executing program.
*/
-/* GETSERVBYPORT_R_PROTO:
- * This symbol encodes the prototype of getservbyport_r.
- * It is zero if d_getservbyport_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyport_r
- * is defined.
+/* PROCSELFEXE_PATH:
+ * If HAS_PROCSELFEXE is defined this symbol is the filename
+ * of the symbolic link pointing to the absolute pathname of
+ * the executing program.
*/
-#$d_getservbyport_r HAS_GETSERVBYPORT_R /**/
-#define GETSERVBYPORT_R_PROTO $getservbyport_r_proto /**/
+#$d_procselfexe HAS_PROCSELFEXE /**/
+#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH)
+#define PROCSELFEXE_PATH $procselfexe /**/
+#endif
-/* HAS_GETSERVENT_R:
- * This symbol, if defined, indicates that the getservent_r routine
- * is available to getservent re-entrantly.
+/* HAS_PTHREAD_ATTR_SETSCOPE:
+ * This symbol, if defined, indicates that the pthread_attr_setscope
+ * system call is available to set the contention scope attribute of
+ * a thread attribute object.
*/
-/* GETSERVENT_R_PROTO:
- * This symbol encodes the prototype of getservent_r.
- * It is zero if d_getservent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r
- * is defined.
+#$d_pthread_attr_setscope HAS_PTHREAD_ATTR_SETSCOPE /**/
+
+/* HAS_READV:
+ * This symbol, if defined, indicates that the readv routine is
+ * available to do gather reads. You will also need <sys/uio.h>
+ * and there I_SYSUIO.
*/
-#$d_getservent_r HAS_GETSERVENT_R /**/
-#define GETSERVENT_R_PROTO $getservent_r_proto /**/
+#$d_readv HAS_READV /**/
-/* HAS_PTHREAD_ATFORK:
- * This symbol, if defined, indicates that the pthread_atfork routine
- * is available to setup fork handlers.
+/* HAS_RECVMSG:
+ * This symbol, if defined, indicates that the recvmsg routine is
+ * available to send structured socket messages.
*/
-#$d_pthread_atfork HAS_PTHREAD_ATFORK /**/
+#$d_recvmsg HAS_RECVMSG /**/
-/* HAS_READDIR64_R:
- * This symbol, if defined, indicates that the readdir64_r routine
- * is available to readdir64 re-entrantly.
+/* HAS_SBRK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the sbrk() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern void* sbrk(int);
+ * extern void* sbrk(size_t);
+ */
+#$d_sbrkproto HAS_SBRK_PROTO /**/
+
+/* HAS_SCALBNL:
+ * This symbol, if defined, indicates that the scalbnl routine is
+ * available. If ilogbl is also present we can emulate frexpl.
+ */
+#$d_scalbnl HAS_SCALBNL /**/
+
+/* HAS_SENDMSG:
+ * This symbol, if defined, indicates that the sendmsg routine is
+ * available to send structured socket messages.
+ */
+#$d_sendmsg HAS_SENDMSG /**/
+
+/* HAS_SETITIMER:
+ * This symbol, if defined, indicates that the setitimer routine is
+ * available to set interval timers.
+ */
+#$d_setitimer HAS_SETITIMER /**/
+
+/* HAS_SETPROCTITLE:
+ * This symbol, if defined, indicates that the setproctitle routine is
+ * available to set process title.
+ */
+#$d_setproctitle HAS_SETPROCTITLE /**/
+
+/* USE_SFIO:
+ * This symbol, if defined, indicates that sfio should
+ * be used.
+ */
+#$d_sfio USE_SFIO /**/
+
+/* HAS_SIGNBIT:
+ * This symbol, if defined, indicates that the signbit routine is
+ * available to check if the given number has the sign bit set.
+ * This should include correct testing of -0.0. This will only be set
+ * if the signbit() routine is safe to use with the NV type used internally
+ * in perl. Users should call Perl_signbit(), which will be #defined to
+ * the system's signbit() function or macro if this symbol is defined.
+ */
+#$d_signbit HAS_SIGNBIT /**/
+
+/* HAS_SIGPROCMASK:
+ * This symbol, if defined, indicates that the sigprocmask
+ * system call is available to examine or change the signal mask
+ * of the calling process.
+ */
+#$d_sigprocmask HAS_SIGPROCMASK /**/
+
+/* USE_SITECUSTOMIZE:
+ * This symbol, if defined, indicates that sitecustomize should
+ * be used.
+ */
+#ifndef USE_SITECUSTOMIZE
+#$usesitecustomize USE_SITECUSTOMIZE /**/
+#endif
+
+/* HAS_SNPRINTF:
+ * This symbol, if defined, indicates that the snprintf () library
+ * function is available for use.
+ */
+/* HAS_VSNPRINTF:
+ * This symbol, if defined, indicates that the vsnprintf () library
+ * function is available for use.
+ */
+#$d_snprintf HAS_SNPRINTF /**/
+#$d_vsnprintf HAS_VSNPRINTF /**/
+
+/* HAS_SOCKATMARK:
+ * This symbol, if defined, indicates that the sockatmark routine is
+ * available to test whether a socket is at the out-of-band mark.
+ */
+#$d_sockatmark HAS_SOCKATMARK /**/
+
+/* HAS_SOCKATMARK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the sockatmark() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int sockatmark(int);
+ */
+#$d_sockatmarkproto HAS_SOCKATMARK_PROTO /**/
+
+/* HAS_SOCKS5_INIT:
+ * This symbol, if defined, indicates that the socks5_init routine is
+ * available to initialize SOCKS 5.
+ */
+#$d_socks5_init HAS_SOCKS5_INIT /**/
+
+/* SPRINTF_RETURNS_STRLEN:
+ * This variable defines whether sprintf returns the length of the string
+ * (as per the ANSI spec). Some C libraries retain compatibility with
+ * pre-ANSI C and return a pointer to the passed in buffer; for these
+ * this variable will be undef.
+ */
+#$d_sprintf_returns_strlen SPRINTF_RETURNS_STRLEN /**/
+
+/* HAS_SQRTL:
+ * This symbol, if defined, indicates that the sqrtl routine is
+ * available to do long double square roots.
+ */
+#$d_sqrtl HAS_SQRTL /**/
+
+/* HAS_SETRESGID_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the setresgid() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);
+ */
+#$d_sresgproto HAS_SETRESGID_PROTO /**/
+
+/* HAS_SETRESUID_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the setresuid() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);
+ */
+#$d_sresuproto HAS_SETRESUID_PROTO /**/
+
+/* HAS_STRUCT_STATFS_F_FLAGS:
+ * This symbol, if defined, indicates that the struct statfs
+ * does have the f_flags member containing the mount flags of
+ * the filesystem containing the file.
+ * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
+ * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
+ * have statfs() and struct statfs, they have ustat() and getmnt()
+ * with struct ustat and struct fs_data.
+ */
+#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS /**/
+
+/* HAS_STRUCT_STATFS:
+ * This symbol, if defined, indicates that the struct statfs
+ * to do statfs() is supported.
+ */
+#$d_statfs_s HAS_STRUCT_STATFS /**/
+
+/* HAS_FSTATVFS:
+ * This symbol, if defined, indicates that the fstatvfs routine is
+ * available to stat filesystems by file descriptors.
+ */
+#$d_fstatvfs HAS_FSTATVFS /**/
+
+/* HAS_STRFTIME:
+ * This symbol, if defined, indicates that the strftime routine is
+ * available to do time formatting.
+ */
+#$d_strftime HAS_STRFTIME /**/
+
+/* HAS_STRLCAT:
+ * This symbol, if defined, indicates that the strlcat () routine is
+ * available to do string concatenation.
+ */
+#$d_strlcat HAS_STRLCAT /**/
+
+/* HAS_STRLCPY:
+ * This symbol, if defined, indicates that the strlcpy () routine is
+ * available to do string copying.
+ */
+#$d_strlcpy HAS_STRLCPY /**/
+
+/* HAS_STRTOLD:
+ * This symbol, if defined, indicates that the strtold routine is
+ * available to convert strings to long doubles.
+ */
+#$d_strtold HAS_STRTOLD /**/
+
+/* HAS_STRTOLL:
+ * This symbol, if defined, indicates that the strtoll routine is
+ * available to convert strings to long longs.
+ */
+#$d_strtoll HAS_STRTOLL /**/
+
+/* HAS_STRTOQ:
+ * This symbol, if defined, indicates that the strtoq routine is
+ * available to convert strings to long longs (quads).
+ */
+#$d_strtoq HAS_STRTOQ /**/
+
+/* HAS_STRTOULL:
+ * This symbol, if defined, indicates that the strtoull routine is
+ * available to convert strings to unsigned long longs.
+ */
+#$d_strtoull HAS_STRTOULL /**/
+
+/* HAS_STRTOUQ:
+ * This symbol, if defined, indicates that the strtouq routine is
+ * available to convert strings to unsigned long longs (quads).
+ */
+#$d_strtouq HAS_STRTOUQ /**/
+
+/* HAS_SYSCALL_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the syscall() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int syscall(int, ...);
+ * extern int syscall(long, ...);
+ */
+#$d_syscallproto HAS_SYSCALL_PROTO /**/
+
+/* HAS_TELLDIR_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the telldir() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern long telldir(DIR*);
+ */
+#$d_telldirproto HAS_TELLDIR_PROTO /**/
+
+/* HAS_CTIME64:
+ * This symbol, if defined, indicates that the ctime64 () routine is
+ * available to do the 64bit variant of ctime ()
+ */
+/* HAS_LOCALTIME64:
+ * This symbol, if defined, indicates that the localtime64 () routine is
+ * available to do the 64bit variant of localtime ()
+ */
+/* HAS_GMTIME64:
+ * This symbol, if defined, indicates that the gmtime64 () routine is
+ * available to do the 64bit variant of gmtime ()
+ */
+/* HAS_MKTIME64:
+ * This symbol, if defined, indicates that the mktime64 () routine is
+ * available to do the 64bit variant of mktime ()
+ */
+/* HAS_DIFFTIME64:
+ * This symbol, if defined, indicates that the difftime64 () routine is
+ * available to do the 64bit variant of difftime ()
+ */
+/* HAS_ASCTIME64:
+ * This symbol, if defined, indicates that the asctime64 () routine is
+ * available to do the 64bit variant of asctime ()
+ */
+#$d_ctime64 HAS_CTIME64 /**/
+#$d_localtime64 HAS_LOCALTIME64 /**/
+#$d_gmtime64 HAS_GMTIME64 /**/
+#$d_mktime64 HAS_MKTIME64 /**/
+#$d_difftime64 HAS_DIFFTIME64 /**/
+#$d_asctime64 HAS_ASCTIME64 /**/
+
+/* HAS_TIMEGM:
+ * This symbol, if defined, indicates that the timegm routine is
+ * available to do the opposite of gmtime ()
+ */
+#$d_timegm HAS_TIMEGM /**/
+
+/* U32_ALIGNMENT_REQUIRED:
+ * This symbol, if defined, indicates that you must access
+ * character data through U32-aligned pointers.
+ */
+#ifndef U32_ALIGNMENT_REQUIRED
+#$d_u32align U32_ALIGNMENT_REQUIRED /**/
+#endif
+
+/* HAS_UALARM:
+ * This symbol, if defined, indicates that the ualarm routine is
+ * available to do alarms with microsecond granularity.
+ */
+#$d_ualarm HAS_UALARM /**/
+
+/* HAS_UNORDERED:
+ * This symbol, if defined, indicates that the unordered routine is
+ * available to check whether two doubles are unordered
+ * (effectively: whether either of them is NaN)
+ */
+#$d_unordered HAS_UNORDERED /**/
+
+/* HAS_UNSETENV:
+ * This symbol, if defined, indicates that the unsetenv () routine is
+ * available for use.
+ */
+#$d_unsetenv HAS_UNSETENV /**/
+
+/* HAS_USLEEP_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the usleep() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int usleep(useconds_t);
+ */
+#$d_usleepproto HAS_USLEEP_PROTO /**/
+
+/* HAS_USTAT:
+ * This symbol, if defined, indicates that the ustat system call is
+ * available to query file system statistics by dev_t.
+ */
+#$d_ustat HAS_USTAT /**/
+
+/* HAS_WRITEV:
+ * This symbol, if defined, indicates that the writev routine is
+ * available to do scatter writes.
+ */
+#$d_writev HAS_WRITEV /**/
+
+/* USE_DYNAMIC_LOADING:
+ * This symbol, if defined, indicates that dynamic loading of
+ * some sort is available.
+ */
+#$usedl USE_DYNAMIC_LOADING /**/
+
+/* FFLUSH_NULL:
+ * This symbol, if defined, tells that fflush(NULL) does flush
+ * all pending stdio output.
+ */
+/* FFLUSH_ALL:
+ * This symbol, if defined, tells that to flush
+ * all pending stdio output one must loop through all
+ * the stdio file handles stored in an array and fflush them.
+ * Note that if fflushNULL is defined, fflushall will not
+ * even be probed for and will be left undefined.
+ */
+#$fflushNULL FFLUSH_NULL /**/
+#$fflushall FFLUSH_ALL /**/
+
+/* I_ASSERT:
+ * This symbol, if defined, indicates that <assert.h> exists and
+ * could be included by the C program to get the assert() macro.
+ */
+#$i_assert I_ASSERT /**/
+
+/* I_CRYPT:
+ * This symbol, if defined, indicates that <crypt.h> exists and
+ * should be included.
+ */
+#$i_crypt I_CRYPT /**/
+
+/* DB_Prefix_t:
+ * This symbol contains the type of the prefix structure element
+ * in the <db.h> header file. In older versions of DB, it was
+ * int, while in newer ones it is u_int32_t.
+ */
+/* DB_Hash_t:
+ * This symbol contains the type of the prefix structure element
+ * in the <db.h> header file. In older versions of DB, it was
+ * int, while in newer ones it is size_t.
+ */
+/* DB_VERSION_MAJOR_CFG:
+ * This symbol, if defined, defines the major version number of
+ * Berkeley DB found in the <db.h> header when Perl was configured.
+ */
+/* DB_VERSION_MINOR_CFG:
+ * This symbol, if defined, defines the minor version number of
+ * Berkeley DB found in the <db.h> header when Perl was configured.
+ * For DB version 1 this is always 0.
+ */
+/* DB_VERSION_PATCH_CFG:
+ * This symbol, if defined, defines the patch version number of
+ * Berkeley DB found in the <db.h> header when Perl was configured.
+ * For DB version 1 this is always 0.
+ */
+#define DB_Hash_t $db_hashtype /**/
+#define DB_Prefix_t $db_prefixtype /**/
+#define DB_VERSION_MAJOR_CFG $db_version_major /**/
+#define DB_VERSION_MINOR_CFG $db_version_minor /**/
+#define DB_VERSION_PATCH_CFG $db_version_patch /**/
+
+/* I_FP:
+ * This symbol, if defined, indicates that <fp.h> exists and
+ * should be included.
+ */
+#$i_fp I_FP /**/
+
+/* I_FP_CLASS:
+ * This symbol, if defined, indicates that <fp_class.h> exists and
+ * should be included.
+ */
+#$i_fp_class I_FP_CLASS /**/
+
+/* I_IEEEFP:
+ * This symbol, if defined, indicates that <ieeefp.h> exists and
+ * should be included.
+ */
+#$i_ieeefp I_IEEEFP /**/
+
+/* I_INTTYPES:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <inttypes.h>.
+ */
+#$i_inttypes I_INTTYPES /**/
+
+/* I_LANGINFO:
+ * This symbol, if defined, indicates that <langinfo.h> exists and
+ * should be included.
+ */
+#$i_langinfo I_LANGINFO /**/
+
+/* I_LIBUTIL:
+ * This symbol, if defined, indicates that <libutil.h> exists and
+ * should be included.
+ */
+#$i_libutil I_LIBUTIL /**/
+
+/* I_MALLOCMALLOC:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <malloc/malloc.h>.
+ */
+#$i_mallocmalloc I_MALLOCMALLOC /**/
+
+/* I_MNTENT:
+ * This symbol, if defined, indicates that <mntent.h> exists and
+ * should be included.
+ */
+#$i_mntent I_MNTENT /**/
+
+/* I_NETINET_TCP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <netinet/tcp.h>.
+ */
+#$i_netinettcp I_NETINET_TCP /**/
+
+/* I_POLL:
+ * This symbol, if defined, indicates that <poll.h> exists and
+ * should be included. (see also HAS_POLL)
+ */
+#$i_poll I_POLL /**/
+
+/* I_PROT:
+ * This symbol, if defined, indicates that <prot.h> exists and
+ * should be included.
+ */
+#$i_prot I_PROT /**/
+
+/* I_SHADOW:
+ * This symbol, if defined, indicates that <shadow.h> exists and
+ * should be included.
+ */
+#$i_shadow I_SHADOW /**/
+
+/* I_SOCKS:
+ * This symbol, if defined, indicates that <socks.h> exists and
+ * should be included.
+ */
+#$i_socks I_SOCKS /**/
+
+/* I_STDBOOL:
+ * This symbol, if defined, indicates that <stdbool.h> exists and
+ * can be included.
+ */
+#$i_stdbool I_STDBOOL /**/
+
+/* I_SUNMATH:
+ * This symbol, if defined, indicates that <sunmath.h> exists and
+ * should be included.
+ */
+#$i_sunmath I_SUNMATH /**/
+
+/* I_SYSLOG:
+ * This symbol, if defined, indicates that <syslog.h> exists and
+ * should be included.
+ */
+#$i_syslog I_SYSLOG /**/
+
+/* I_SYSMODE:
+ * This symbol, if defined, indicates that <sys/mode.h> exists and
+ * should be included.
+ */
+#$i_sysmode I_SYSMODE /**/
+
+/* I_SYS_MOUNT:
+ * This symbol, if defined, indicates that <sys/mount.h> exists and
+ * should be included.
+ */
+#$i_sysmount I_SYS_MOUNT /**/
+
+/* I_SYS_STATFS:
+ * This symbol, if defined, indicates that <sys/statfs.h> exists.
+ */
+#$i_sysstatfs I_SYS_STATFS /**/
+
+/* I_SYS_STATVFS:
+ * This symbol, if defined, indicates that <sys/statvfs.h> exists and
+ * should be included.
+ */
+#$i_sysstatvfs I_SYS_STATVFS /**/
+
+/* I_SYSUTSNAME:
+ * This symbol, if defined, indicates that <sys/utsname.h> exists and
+ * should be included.
+ */
+#$i_sysutsname I_SYSUTSNAME /**/
+
+/* I_SYS_VFS:
+ * This symbol, if defined, indicates that <sys/vfs.h> exists and
+ * should be included.
+ */
+#$i_sysvfs I_SYS_VFS /**/
+
+/* I_USTAT:
+ * This symbol, if defined, indicates that <ustat.h> exists and
+ * should be included.
+ */
+#$i_ustat I_USTAT /**/
+
+/* PERL_PRIfldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'f') for output.
+ */
+/* PERL_PRIgldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'g') for output.
+ */
+/* PERL_PRIeldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'e') for output.
+ */
+/* PERL_SCNfldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'f') for input.
+ */
+#$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/
+#$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/
+#$d_PRIeldbl PERL_PRIeldbl $sPRIeldbl /**/
+#$d_SCNfldbl PERL_SCNfldbl $sSCNfldbl /**/
+
+/* PERL_MAD:
+ * This symbol, if defined, indicates that the Misc Attribution
+ * Declaration code should be conditionally compiled.
+ */
+#$mad PERL_MAD /**/
+
+/* NEED_VA_COPY:
+ * This symbol, if defined, indicates that the system stores
+ * the variable argument list datatype, va_list, in a format
+ * that cannot be copied by simple assignment, so that some
+ * other means must be used when copying is required.
+ * As such systems vary in their provision (or non-provision)
+ * of copying mechanisms, handy.h defines a platform-
+ * independent macro, Perl_va_copy(src, dst), to do the job.
+ */
+#$need_va_copy NEED_VA_COPY /**/
+
+/* IVTYPE:
+ * This symbol defines the C type used for Perl's IV.
+ */
+/* UVTYPE:
+ * This symbol defines the C type used for Perl's UV.
+ */
+/* I8TYPE:
+ * This symbol defines the C type used for Perl's I8.
+ */
+/* U8TYPE:
+ * This symbol defines the C type used for Perl's U8.
+ */
+/* I16TYPE:
+ * This symbol defines the C type used for Perl's I16.
+ */
+/* U16TYPE:
+ * This symbol defines the C type used for Perl's U16.
+ */
+/* I32TYPE:
+ * This symbol defines the C type used for Perl's I32.
+ */
+/* U32TYPE:
+ * This symbol defines the C type used for Perl's U32.
+ */
+/* I64TYPE:
+ * This symbol defines the C type used for Perl's I64.
+ */
+/* U64TYPE:
+ * This symbol defines the C type used for Perl's U64.
+ */
+/* NVTYPE:
+ * This symbol defines the C type used for Perl's NV.
+ */
+/* IVSIZE:
+ * This symbol contains the sizeof(IV).
+ */
+/* UVSIZE:
+ * This symbol contains the sizeof(UV).
+ */
+/* I8SIZE:
+ * This symbol contains the sizeof(I8).
+ */
+/* U8SIZE:
+ * This symbol contains the sizeof(U8).
+ */
+/* I16SIZE:
+ * This symbol contains the sizeof(I16).
+ */
+/* U16SIZE:
+ * This symbol contains the sizeof(U16).
+ */
+/* I32SIZE:
+ * This symbol contains the sizeof(I32).
+ */
+/* U32SIZE:
+ * This symbol contains the sizeof(U32).
+ */
+/* I64SIZE:
+ * This symbol contains the sizeof(I64).
+ */
+/* U64SIZE:
+ * This symbol contains the sizeof(U64).
+ */
+/* NVSIZE:
+ * This symbol contains the sizeof(NV).
+ */
+/* NV_PRESERVES_UV:
+ * This symbol, if defined, indicates that a variable of type NVTYPE
+ * can preserve all the bits of a variable of type UVTYPE.
+ */
+/* NV_PRESERVES_UV_BITS:
+ * This symbol contains the number of bits a variable of type NVTYPE
+ * can preserve of a variable of type UVTYPE.
+ */
+/* NV_OVERFLOWS_INTEGERS_AT:
+ * This symbol gives the largest integer value that NVs can hold. This
+ * value + 1.0 cannot be stored accurately. It is expressed as constant
+ * floating point expression to reduce the chance of decimal/binary
+ * conversion issues. If it can not be determined, the value 0 is given.
+ */
+/* NV_ZERO_IS_ALLBITS_ZERO:
+ * This symbol, if defined, indicates that a variable of type NVTYPE
+ * stores 0.0 in memory as all bits zero.
+ */
+#define IVTYPE $ivtype /**/
+#define UVTYPE $uvtype /**/
+#define I8TYPE $i8type /**/
+#define U8TYPE $u8type /**/
+#define I16TYPE $i16type /**/
+#define U16TYPE $u16type /**/
+#define I32TYPE $i32type /**/
+#define U32TYPE $u32type /**/
+#ifdef HAS_QUAD
+#define I64TYPE $i64type /**/
+#define U64TYPE $u64type /**/
+#endif
+#define NVTYPE $nvtype /**/
+#define IVSIZE $ivsize /**/
+#define UVSIZE $uvsize /**/
+#define I8SIZE $i8size /**/
+#define U8SIZE $u8size /**/
+#define I16SIZE $i16size /**/
+#define U16SIZE $u16size /**/
+#define I32SIZE $i32size /**/
+#define U32SIZE $u32size /**/
+#ifdef HAS_QUAD
+#define I64SIZE $i64size /**/
+#define U64SIZE $u64size /**/
+#endif
+#define NVSIZE $nvsize /**/
+#$d_nv_preserves_uv NV_PRESERVES_UV
+#define NV_PRESERVES_UV_BITS $nv_preserves_uv_bits
+#define NV_OVERFLOWS_INTEGERS_AT $nv_overflows_integers_at
+#$d_nv_zero_is_allbits_zero NV_ZERO_IS_ALLBITS_ZERO
+#if UVSIZE == 8
+# ifdef BYTEORDER
+# if BYTEORDER == 0x1234
+# undef BYTEORDER
+# define BYTEORDER 0x12345678
+# else
+# if BYTEORDER == 0x4321
+# undef BYTEORDER
+# define BYTEORDER 0x87654321
+# endif
+# endif
+# endif
+#endif
+
+/* IVdf:
+ * This symbol defines the format string used for printing a Perl IV
+ * as a signed decimal integer.
*/
-/* READDIR64_R_PROTO:
- * This symbol encodes the prototype of readdir64_r.
- * It is zero if d_readdir64_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir64_r
- * is defined.
+/* UVuf:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned decimal integer.
*/
-#$d_readdir64_r HAS_READDIR64_R /**/
-#define READDIR64_R_PROTO $readdir64_r_proto /**/
+/* UVof:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned octal integer.
+ */
+/* UVxf:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned hexadecimal integer in lowercase abcdef.
+ */
+/* UVXf:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned hexadecimal integer in uppercase ABCDEF.
+ */
+/* NVef:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %e-ish floating point format.
+ */
+/* NVff:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %f-ish floating point format.
+ */
+/* NVgf:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %g-ish floating point format.
+ */
+#define IVdf $ivdformat /**/
+#define UVuf $uvuformat /**/
+#define UVof $uvoformat /**/
+#define UVxf $uvxformat /**/
+#define UVXf $uvXUformat /**/
+#define NVef $nveformat /**/
+#define NVff $nvfformat /**/
+#define NVgf $nvgformat /**/
-/* HAS_SETHOSTENT_R:
- * This symbol, if defined, indicates that the sethostent_r routine
- * is available to sethostent re-entrantly.
+/* SELECT_MIN_BITS:
+ * This symbol holds the minimum number of bits operated by select.
+ * That is, if you do select(n, ...), how many bits at least will be
+ * cleared in the masks if some activity is detected. Usually this
+ * is either n or 32*ceil(n/32), especially many little-endians do
+ * the latter. This is only useful if you have select(), naturally.
*/
-/* SETHOSTENT_R_PROTO:
- * This symbol encodes the prototype of sethostent_r.
- * It is zero if d_sethostent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_sethostent_r
- * is defined.
+#define SELECT_MIN_BITS $selectminbits /**/
+
+/* ST_INO_SIZE:
+ * This variable contains the size of struct stat's st_ino in bytes.
*/
-#$d_sethostent_r HAS_SETHOSTENT_R /**/
-#define SETHOSTENT_R_PROTO $sethostent_r_proto /**/
+/* ST_INO_SIGN:
+ * This symbol holds the signedness of struct stat's st_ino.
+ * 1 for unsigned, -1 for signed.
+ */
+#define ST_INO_SIGN $st_ino_sign /* st_ino sign */
+#define ST_INO_SIZE $st_ino_size /* st_ino size */
-/* HAS_SETLOCALE_R:
- * This symbol, if defined, indicates that the setlocale_r routine
- * is available to setlocale re-entrantly.
+/* STARTPERL:
+ * This variable contains the string to put in front of a perl
+ * script to make sure (one hopes) that it runs with perl and not
+ * some shell.
*/
-/* SETLOCALE_R_PROTO:
- * This symbol encodes the prototype of setlocale_r.
- * It is zero if d_setlocale_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setlocale_r
- * is defined.
+#define STARTPERL "$startperl" /**/
+
+/* HAS_STDIO_STREAM_ARRAY:
+ * This symbol, if defined, tells that there is an array
+ * holding the stdio streams.
*/
-#$d_setlocale_r HAS_SETLOCALE_R /**/
-#define SETLOCALE_R_PROTO $setlocale_r_proto /**/
+/* STDIO_STREAM_ARRAY:
+ * This symbol tells the name of the array holding the stdio streams.
+ * Usual values include _iob, __iob, and __sF.
+ */
+#$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY /**/
+#ifdef HAS_STDIO_STREAM_ARRAY
+#define STDIO_STREAM_ARRAY $stdio_stream_array
+#endif
-/* HAS_SETNETENT_R:
- * This symbol, if defined, indicates that the setnetent_r routine
- * is available to setnetent re-entrantly.
+/* GMTIME_MAX:
+ * This symbol contains the maximum value for the time_t offset that
+ * the system function gmtime () accepts, and defaults to 0
*/
-/* SETNETENT_R_PROTO:
- * This symbol encodes the prototype of setnetent_r.
- * It is zero if d_setnetent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setnetent_r
- * is defined.
+/* GMTIME_MIN:
+ * This symbol contains the minimum value for the time_t offset that
+ * the system function gmtime () accepts, and defaults to 0
*/
-#$d_setnetent_r HAS_SETNETENT_R /**/
-#define SETNETENT_R_PROTO $setnetent_r_proto /**/
+/* LOCALTIME_MAX:
+ * This symbol contains the maximum value for the time_t offset that
+ * the system function localtime () accepts, and defaults to 0
+ */
+/* LOCALTIME_MIN:
+ * This symbol contains the minimum value for the time_t offset that
+ * the system function localtime () accepts, and defaults to 0
+ */
+#define GMTIME_MAX $sGMTIME_max /**/
+#define GMTIME_MIN $sGMTIME_min /**/
+#define LOCALTIME_MAX $sLOCALTIME_max /**/
+#define LOCALTIME_MIN $sLOCALTIME_min /**/
-/* HAS_SETPROTOENT_R:
- * This symbol, if defined, indicates that the setprotoent_r routine
- * is available to setprotoent re-entrantly.
+/* USE_64_BIT_INT:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be employed (be they 32 or 64 bits). The minimal possible
+ * 64-bitness is used, just enough to get 64-bit integers into Perl.
+ * This may mean using for example "long longs", while your memory
+ * may still be limited to 2 gigabytes.
*/
-/* SETPROTOENT_R_PROTO:
- * This symbol encodes the prototype of setprotoent_r.
- * It is zero if d_setprotoent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setprotoent_r
- * is defined.
+/* USE_64_BIT_ALL:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be used (be they 32 or 64 bits). The maximal possible
+ * 64-bitness is employed: LP64 or ILP64, meaning that you will
+ * be able to use more than 2 gigabytes of memory. This mode is
+ * even more binary incompatible than USE_64_BIT_INT. You may not
+ * be able to run the resulting executable in a 32-bit CPU at all or
+ * you may need at least to reboot your OS to 64-bit mode.
*/
-#$d_setprotoent_r HAS_SETPROTOENT_R /**/
-#define SETPROTOENT_R_PROTO $setprotoent_r_proto /**/
+#ifndef USE_64_BIT_INT
+#$use64bitint USE_64_BIT_INT /**/
+#endif
+#ifndef USE_64_BIT_ALL
+#$use64bitall USE_64_BIT_ALL /**/
+#endif
-/* HAS_SETSERVENT_R:
- * This symbol, if defined, indicates that the setservent_r routine
- * is available to setservent re-entrantly.
+/* USE_DTRACE:
+ * This symbol, if defined, indicates that Perl should
+ * be built with support for DTrace.
*/
-/* SETSERVENT_R_PROTO:
- * This symbol encodes the prototype of setservent_r.
- * It is zero if d_setservent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setservent_r
- * is defined.
+#$usedtrace USE_DTRACE /**/
+
+/* USE_FAST_STDIO:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use 'fast stdio'.
+ * Defaults to define in Perls 5.8 and earlier, to undef later.
*/
-#$d_setservent_r HAS_SETSERVENT_R /**/
-#define SETSERVENT_R_PROTO $setservent_r_proto /**/
+#ifndef USE_FAST_STDIO
+#$usefaststdio USE_FAST_STDIO /**/
+#endif
-/* HAS_TTYNAME_R:
- * This symbol, if defined, indicates that the ttyname_r routine
- * is available to ttyname re-entrantly.
+/* USE_KERN_PROC_PATHNAME:
+ * This symbol, if defined, indicates that we can use sysctl with
+ * KERN_PROC_PATHNAME to get a full path for the executable, and hence
+ * convert $^X to an absolute path.
*/
-/* TTYNAME_R_PROTO:
- * This symbol encodes the prototype of ttyname_r.
- * It is zero if d_ttyname_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ttyname_r
- * is defined.
+#$usekernprocpathname USE_KERN_PROC_PATHNAME /**/
+
+/* USE_LARGE_FILES:
+ * This symbol, if defined, indicates that large file support
+ * should be used when available.
*/
-#$d_ttyname_r HAS_TTYNAME_R /**/
-#define TTYNAME_R_PROTO $ttyname_r_proto /**/
+#ifndef USE_LARGE_FILES
+#$uselargefiles USE_LARGE_FILES /**/
+#endif
+
+/* USE_LONG_DOUBLE:
+ * This symbol, if defined, indicates that long doubles should
+ * be used when available.
+ */
+#ifndef USE_LONG_DOUBLE
+#$uselongdouble USE_LONG_DOUBLE /**/
+#endif
+
+/* USE_MORE_BITS:
+ * This symbol, if defined, indicates that 64-bit interfaces and
+ * long doubles should be used when available.
+ */
+#ifndef USE_MORE_BITS
+#$usemorebits USE_MORE_BITS /**/
+#endif
+
+/* MULTIPLICITY:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use multiplicity.
+ */
+#ifndef MULTIPLICITY
+#$usemultiplicity MULTIPLICITY /**/
+#endif
+
+/* USE_NSGETEXECUTABLEPATH:
+ * This symbol, if defined, indicates that we can use _NSGetExecutablePath
+ * and realpath to get a full path for the executable, and hence convert
+ * $^X to an absolute path.
+ */
+#$usensgetexecutablepath USE_NSGETEXECUTABLEPATH /**/
+
+/* USE_PERLIO:
+ * This symbol, if defined, indicates that the PerlIO abstraction should
+ * be used throughout. If not defined, stdio should be
+ * used in a fully backward compatible manner.
+ */
+#ifndef USE_PERLIO
+#$useperlio USE_PERLIO /**/
+#endif
+
+/* USE_SOCKS:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use socks.
+ */
+#ifndef USE_SOCKS
+#$usesocks USE_SOCKS /**/
+#endif
#endif
!GROK!THIS!
+;;
+esac
https://perl5.git.perl.org / perl5.git / blobdiff