package feature;
-our $VERSION = '1.44';
+our $VERSION = '1.57';
our %feature = (
fc => 'feature_fc',
+ isa => 'feature_isa',
say => 'feature_say',
state => 'feature_state',
switch => 'feature_switch',
bitwise => 'feature_bitwise',
evalbytes => 'feature_evalbytes',
- array_base => 'feature_arybase',
signatures => 'feature_signatures',
current_sub => 'feature___SUB__',
refaliasing => 'feature_refaliasing',
);
our %feature_bundle = (
- "5.10" => [qw(array_base say state switch)],
- "5.11" => [qw(array_base say state switch unicode_strings)],
+ "5.10" => [qw(say state switch)],
+ "5.11" => [qw(say state switch unicode_strings)],
"5.15" => [qw(current_sub evalbytes fc say state switch unicode_eval unicode_strings)],
"5.23" => [qw(current_sub evalbytes fc postderef_qq say state switch unicode_eval unicode_strings)],
- "all" => [qw(array_base bitwise current_sub declared_refs evalbytes fc postderef_qq refaliasing say signatures state switch unicode_eval unicode_strings)],
- "default" => [qw(array_base)],
+ "5.27" => [qw(bitwise current_sub evalbytes fc postderef_qq say state switch unicode_eval unicode_strings)],
+ "all" => [qw(bitwise current_sub declared_refs evalbytes fc isa postderef_qq refaliasing say signatures state switch unicode_eval unicode_strings)],
+ "default" => [qw()],
);
$feature_bundle{"5.12"} = $feature_bundle{"5.11"};
$feature_bundle{"5.24"} = $feature_bundle{"5.23"};
$feature_bundle{"5.25"} = $feature_bundle{"5.23"};
$feature_bundle{"5.26"} = $feature_bundle{"5.23"};
+$feature_bundle{"5.28"} = $feature_bundle{"5.27"};
+$feature_bundle{"5.29"} = $feature_bundle{"5.27"};
+$feature_bundle{"5.30"} = $feature_bundle{"5.27"};
+$feature_bundle{"5.31"} = $feature_bundle{"5.27"};
+$feature_bundle{"5.32"} = $feature_bundle{"5.27"};
$feature_bundle{"5.9.5"} = $feature_bundle{"5.10"};
my %noops = (
postderef => 1,
lexical_subs => 1,
);
+my %removed = (
+ array_base => 1,
+);
our $hint_shift = 26;
our $hint_mask = 0x1c000000;
-our @hint_bundles = qw( default 5.10 5.11 5.15 5.23 );
+our @hint_bundles = qw( default 5.10 5.11 5.15 5.23 5.27 );
# This gets set (for now) in $^H as well as in %^H,
# for runtime speed of the uc/lc/ucfirst/lcfirst functions.
C<use feature 'unicode_strings'> subpragma is B<strongly> recommended.
This feature is available starting with Perl 5.12; was almost fully
-implemented in Perl 5.14; and extended in Perl 5.16 to cover C<quotemeta>.
+implemented in Perl 5.14; and extended in Perl 5.16 to cover C<quotemeta>;
+was extended further in Perl 5.26 to cover L<the range
+operator|perlop/Range Operators>; and was extended again in Perl 5.28 to
+cover L<special-cased whitespace splitting|perlfunc/split>.
=head2 The 'unicode_eval' and 'evalbytes' features
-Under the C<unicode_eval> feature, Perl's C<eval> function, when passed a
-string, will evaluate it as a string of characters, ignoring any
-C<use utf8> declarations. C<use utf8> exists to declare the encoding of
-the script, which only makes sense for a stream of bytes, not a string of
-characters. Source filters are forbidden, as they also really only make
-sense on strings of bytes. Any attempt to activate a source filter will
-result in an error.
-
-The C<evalbytes> feature enables the C<evalbytes> keyword, which evaluates
-the argument passed to it as a string of bytes. It dies if the string
-contains any characters outside the 8-bit range. Source filters work
-within C<evalbytes>: they apply to the contents of the string being
-evaluated.
-
-Together, these two features are intended to replace the historical C<eval>
-function, which has (at least) two bugs in it, that cannot easily be fixed
-without breaking existing programs:
-
-=over
-
-=item *
-
-C<eval> behaves differently depending on the internal encoding of the
-string, sometimes treating its argument as a string of bytes, and sometimes
-as a string of characters.
-
-=item *
-
-Source filters activated within C<eval> leak out into whichever I<file>
-scope is currently being compiled. To give an example with the CPAN module
-L<Semi::Semicolons>:
+Together, these two features are intended to replace the legacy string
+C<eval> function, which behaves problematically in some instances. They are
+available starting with Perl 5.16, and are enabled by default by a
+S<C<use 5.16>> or higher declaration.
- BEGIN { eval "use Semi::Semicolons; # not filtered here " }
- # filtered here!
+C<unicode_eval> changes the behavior of plain string C<eval> to work more
+consistently, especially in the Unicode world. Certain (mis)behaviors
+couldn't be changed without breaking some things that had come to rely on
+them, so the feature can be enabled and disabled. Details are at
+L<perlfunc/Under the "unicode_eval" feature>.
-C<evalbytes> fixes that to work the way one would expect:
-
- use feature "evalbytes";
- BEGIN { evalbytes "use Semi::Semicolons; # filtered " }
- # not filtered
-
-=back
-
-These two features are available starting with Perl 5.16.
+C<evalbytes> is like string C<eval>, but operating on a byte stream that is
+not UTF-8 encoded. Details are at L<perlfunc/evalbytes EXPR>. Without a
+S<C<use feature 'evalbytes'>> nor a S<C<use v5.16>> (or higher) declaration in
+the current scope, you can still access it by instead writing
+C<CORE::evalbytes>.
=head2 The 'current_sub' feature
=head2 The 'array_base' feature
-This feature supports the legacy C<$[> variable. See L<perlvar/$[> and
-L<arybase>. It is on by default but disabled under C<use v5.16> (see
-L</IMPLICIT LOADING>, below).
+This feature supported the legacy C<$[> variable. See L<perlvar/$[>.
+It was on by default but disabled under C<use v5.16> (see
+L</IMPLICIT LOADING>, below) and unavailable since perl 5.30.
This feature is available under this name starting with Perl 5.16. In
previous versions, it was simply on all the time, and this pragma knew
=head2 The 'bitwise' feature
+This makes the four standard bitwise operators (C<& | ^ ~>) treat their
+operands consistently as numbers, and introduces four new dotted operators
+(C<&. |. ^. ~.>) that treat their operands consistently as strings. The
+same applies to the assignment variants (C<&= |= ^= &.= |.= ^.=>).
+
+See L<perlop/Bitwise String Operators> for details.
+
+This feature is available from Perl 5.22 onwards. Starting in Perl 5.28,
+C<use v5.28> will enable the feature. Before 5.28, it was still
+experimental and would emit a warning in the "experimental::bitwise"
+category.
+
+=head2 The 'declared_refs' feature
+
B<WARNING>: This feature is still experimental and the implementation may
change in future versions of Perl. For this reason, Perl will
warn when you use the feature, unless you have explicitly disabled the
warning:
- no warnings "experimental::bitwise";
+ no warnings "experimental::declared_refs";
-This makes the four standard bitwise operators (C<& | ^ ~>) treat their
-operands consistently as numbers, and introduces four new dotted operators
-(C<&. |. ^. ~.>) that treat their operands consistently as strings. The
-same applies to the assignment variants (C<&= |= ^= &.= |.= ^.=>).
+This allows a reference to a variable to be declared with C<my>, C<state>,
+our C<our>, or localized with C<local>. It is intended mainly for use in
+conjunction with the "refaliasing" feature. See L<perlref/Declaring a
+Reference to a Variable> for examples.
-See L<perlop/Bitwise String Operators> for details.
+This feature is available from Perl 5.26 onwards.
-This feature is available from Perl 5.22 onwards.
+=head2 The 'isa' feature
+
+This allows the use of the C<isa> infix operator, which tests whether the
+scalar given by the left operand is an object of the class given by the
+right operand. See L<perlop/Class Instance Operator> for more details.
+
+This feature is available from Perl 5.32 onwards.
=head1 FEATURE BUNDLES
bundle features included
--------- -----------------
- :default array_base
+ :default
- :5.10 say state switch array_base
+ :5.10 say state switch
- :5.12 say state switch unicode_strings array_base
+ :5.12 say state switch unicode_strings
- :5.14 say state switch unicode_strings array_base
+ :5.14 say state switch unicode_strings
:5.16 say state switch unicode_strings
unicode_eval evalbytes current_sub fc
unicode_eval evalbytes current_sub fc
postderef_qq
+ :5.28 say state switch unicode_strings
+ unicode_eval evalbytes current_sub fc
+ postderef_qq bitwise
+
+ :5.30 say state switch unicode_strings
+ unicode_eval evalbytes current_sub fc
+ postderef_qq bitwise
+
+ :5.32 say state switch unicode_strings
+ unicode_eval evalbytes current_sub fc
+ postderef_qq bitwise
+
The C<:default> bundle represents the feature set that is enabled before
any C<use feature> or C<no feature> declaration.
If the required version is older than Perl 5.10, the ":default" feature
bundle is automatically loaded instead.
+Unlike C<use feature ":5.12">, saying C<use v5.12> (or any higher version)
+also does the equivalent of C<use strict>; see L<perlfunc/use> for details.
+
=back
=cut
my $import = shift;
my $bundle_number = $^H & $hint_mask;
my $features = $bundle_number != $hint_mask
- && $feature_bundle{$hint_bundles[$bundle_number >> $hint_shift]};
+ && $feature_bundle{$hint_bundles[$bundle_number >> $hint_shift]};
if ($features) {
# Features are enabled implicitly via bundle hints.
# Delete any keys that may be left over from last time.
if (exists $noops{$name}) {
next;
}
+ if (!$import && exists $removed{$name}) {
+ next;
+ }
unknown_feature($name);
}
if ($import) {
https://perl5.git.perl.org / perl5.git / blobdiff