* and thus can be used to determine our current state.
*/
+/* A jmpenv packages the state required to perform a proper non-local jump.
+ * Note that there is a start_env initialized when perl starts, and top_env
+ * points to this initially, so top_env should always be non-null.
+ *
+ * Existence of a non-null top_env->je_prev implies it is valid to call
+ * longjmp() at that runlevel (we make sure start_env.je_prev is always
+ * null to ensure this).
+ *
+ * je_mustcatch, when set at any runlevel to TRUE, means eval ops must
+ * establish a local jmpenv to handle exception traps. Care must be taken
+ * to restore the previous value of je_mustcatch before exiting the
+ * stack frame iff JMPENV_PUSH was not called in that stack frame.
+ * GSAR 97-03-27
+ */
+
+struct jmpenv {
+ struct jmpenv * je_prev;
+ Sigjmp_buf je_buf; /* only for use if !je_throw */
+ int je_ret; /* last exception thrown */
+ bool je_mustcatch; /* need to call longjmp()? */
+};
+
+typedef struct jmpenv JMPENV;
+
+#ifdef OP_IN_REGISTER
+#define OP_REG_TO_MEM PL_opsave = op
+#define OP_MEM_TO_REG op = PL_opsave
+#else
+#define OP_REG_TO_MEM NOOP
+#define OP_MEM_TO_REG NOOP
+#endif
+
+/*
+ * How to build the first jmpenv.
+ *
+ * top_env needs to be non-zero. It points to an area
+ * in which longjmp() stuff is stored, as C callstack
+ * info there at least is thread specific this has to
+ * be per-thread. Otherwise a 'die' in a thread gives
+ * that thread the C stack of last thread to do an eval {}!
+ */
+
+#define JMPENV_BOOTSTRAP \
+ STMT_START { \
+ Zero(&PL_start_env, 1, JMPENV); \
+ PL_start_env.je_ret = -1; \
+ PL_start_env.je_mustcatch = TRUE; \
+ PL_top_env = &PL_start_env; \
+ } STMT_END
+
+/*
+ * PERL_FLEXIBLE_EXCEPTIONS
+ *
+ * All the flexible exceptions code has been removed.
+ * See the following threads for details:
+ *
+ * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2004-07/msg00378.html
+ *
+ * Joshua's original patches (which weren't applied) and discussion:
+ *
+ * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01396.html
+ * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01489.html
+ * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01491.html
+ * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01608.html
+ * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02144.html
+ * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02998.html
+ *
+ * Chip's reworked patch and discussion:
+ *
+ * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1999-03/msg00520.html
+ *
+ * The flaw in these patches (which went unnoticed at the time) was
+ * that they moved some code that could potentially die() out of the
+ * region protected by the setjmp()s. This caused exceptions within
+ * END blocks and such to not be handled by the correct setjmp().
+ *
+ * The original patches that introduces flexible exceptions were:
+ *
+ * http://public.activestate.com/cgi-bin/perlbrowse?patch=3386
+ * http://public.activestate.com/cgi-bin/perlbrowse?patch=5162
+ */
+
+#define dJMPENV JMPENV cur_env
+
+#define JMPENV_PUSH(v) \
+ STMT_START { \
+ DEBUG_l(Perl_deb(aTHX_ "Setting up jumplevel %p, was %p\n", \
+ &cur_env, PL_top_env)); \
+ cur_env.je_prev = PL_top_env; \
+ OP_REG_TO_MEM; \
+ cur_env.je_ret = PerlProc_setjmp(cur_env.je_buf, SCOPE_SAVES_SIGNAL_MASK); \
+ OP_MEM_TO_REG; \
+ PL_top_env = &cur_env; \
+ cur_env.je_mustcatch = FALSE; \
+ (v) = cur_env.je_ret; \
+ } STMT_END
+
+#define JMPENV_POP \
+ STMT_START { \
+ DEBUG_l(Perl_deb(aTHX_ "popping jumplevel was %p, now %p\n", \
+ PL_top_env, cur_env.je_prev)); \
+ PL_top_env = cur_env.je_prev; \
+ } STMT_END
+
+#define JMPENV_JUMP(v) \
+ STMT_START { \
+ OP_REG_TO_MEM; \
+ if (PL_top_env->je_prev) \
+ PerlProc_longjmp(PL_top_env->je_buf, (v)); \
+ if ((v) == 2) \
+ PerlProc_exit(STATUS_NATIVE_EXPORT); \
+ PerlIO_printf(PerlIO_stderr(), "panic: top_env\n"); \
+ PerlProc_exit(1); \
+ } STMT_END
+
+#define CATCH_GET (PL_top_env->je_mustcatch)
+#define CATCH_SET(v) (PL_top_env->je_mustcatch = (v))
+
+
+
struct cop {
BASEOP
char * cop_label; /* label for this construct */
# define CopSTASH(c) (CopSTASHPV(c) \
? gv_stashpv(CopSTASHPV(c),GV_ADD) : Nullhv)
-# define CopSTASH_set(c,hv) CopSTASHPV_set(c, (hv) ? HvNAME(hv) : Nullch)
-# define CopSTASH_eq(c,hv) ((hv) \
- && (CopSTASHPV(c) == HvNAME(hv) \
- || (CopSTASHPV(c) && HvNAME(hv) \
- && strEQ(CopSTASHPV(c), HvNAME(hv)))))
+# define CopSTASH_set(c,hv) CopSTASHPV_set(c, (hv) ? HvNAME_get(hv) : Nullch)
+# define CopSTASH_eq(c,hv) ((hv) && stashpv_hvname_match(c,hv))
# ifdef NETWARE
# define CopSTASH_free(c) SAVECOPSTASH_FREE(c)
-# else
-# define CopSTASH_free(c) PerlMemShared_free(CopSTASHPV(c))
-# endif
-
-# ifdef NETWARE
# define CopFILE_free(c) SAVECOPFILE_FREE(c)
# else
-# define CopFILE_free(c) (PerlMemShared_free(CopFILE(c)),(CopFILE(c) = Nullch))
+# define CopSTASH_free(c) PerlMemShared_free(CopSTASHPV(c))
+# define CopFILE_free(c) (PerlMemShared_free(CopFILE(c)),(CopFILE(c) = Nullch))
# endif
#else
# define CopFILEGV(c) ((c)->cop_filegv)
# define CopFILE(c) (CopFILESV(c) ? SvPVX(CopFILESV(c)) : Nullch)
# define CopSTASH(c) ((c)->cop_stash)
# define CopSTASH_set(c,hv) ((c)->cop_stash = (hv))
-# define CopSTASHPV(c) (CopSTASH(c) ? HvNAME(CopSTASH(c)) : Nullch)
+# define CopSTASHPV(c) (CopSTASH(c) ? HvNAME_get(CopSTASH(c)) : Nullch)
/* cop_stash is not refcounted */
# define CopSTASHPV_set(c,pv) CopSTASH_set((c), gv_stashpv(pv,GV_ADD))
# define CopSTASH_eq(c,hv) (CopSTASH(c) == (hv))
#define CLEAR_ARGARRAY(ary) \
STMT_START { \
AvMAX(ary) += AvARRAY(ary) - AvALLOC(ary); \
- SvPVX(ary) = (char*)AvALLOC(ary); \
+ SvPV_set(ary, (char*)AvALLOC(ary)); \
AvFILLp(ary) = -1; \
} STMT_END
SvREFCNT_dec(cx->blk_sub.argarray); \
cx->blk_sub.argarray = newAV(); \
av_extend(cx->blk_sub.argarray, fill); \
- AvFLAGS(cx->blk_sub.argarray) = AVf_REIFY; \
+ AvREIFY_only(cx->blk_sub.argarray); \
CX_CURPAD_SV(cx->blk_sub, 0) = (SV*)cx->blk_sub.argarray; \
} \
else { \
SV * cur_text;
CV * cv;
OP * retop; /* op to execute on exit from eval */
+ JMPENV * cur_top_env; /* value of PL_top_env when eval CX created */
};
#define PUSHEVAL(cx,n,fgv) \
cx->blk_eval.cur_text = PL_linestr; \
cx->blk_eval.cv = Nullcv; /* set by doeval(), as applicable */ \
cx->blk_eval.retop = Nullop; \
+ cx->blk_eval.cur_top_env = PL_top_env; \
} STMT_END
#define POPEVAL(cx) \
https://perl5.git.perl.org / perl5.git / blobdiff