}
} else {
my %plan = @_;
+ $plan{skip_all} and skip_all($plan{skip_all});
$n = $plan{tests};
}
_print "1..$n\n" unless $noplan;
}
$source_dir = $where;
}
+ } elsif (exists $ENV{GIT_DIR}) {
+ my $commit = '8d063cd8450e59ea1c611a2f4f5a21059a2804f1';
+ my $out = `git rev-parse --verify --quiet '$commit^{commit}'`;
+ chomp $out;
+ if($out eq $commit) {
+ $source_dir = '.'
+ }
}
if ($source_dir) {
my $version_string = `git --version`;
if ($z =~ /[[:^print:]]/) {
# Use octal for characters traditionally expressed as
- # such: the low controls
+ # such: the low controls, which on EBCDIC aren't
+ # necessarily the same ones as on ASCII platforms, but
+ # are small ordinals, nonetheless
if ($c <= 037) {
$z = sprintf "\\%03o", $c;
} else {
sub like_yn ($$$@) {
my ($flip, undef, $expected, $name, @mess) = @_;
+
+ # We just accept like(..., qr/.../), not like(..., '...'), and
+ # definitely not like(..., '/.../') like
+ # Test::Builder::maybe_regex() does.
+ unless (re::is_regexp($expected)) {
+ die "PANIC: The value '$expected' isn't a regexp. The like() function needs a qr// pattern, not a string";
+ }
+
my $pass;
$pass = $_[1] =~ /$expected/ if !$flip;
$pass = $_[1] !~ /$expected/ if $flip;
}
}
-# runperl - Runs a separate perl interpreter.
+# runperl - Runs a separate perl interpreter and returns its output.
# Arguments :
# switches => [ command-line switches ]
# nolib => 1 # don't use -I../lib (included by default)
# prog => one-liner (avoid quotes)
# progs => [ multi-liner (avoid quotes) ]
# progfile => perl script
-# stdin => string to feed the stdin
-# stderr => redirect stderr to stdout
+# stdin => string to feed the stdin (or undef to redirect from /dev/null)
+# stderr => If 'devnull' suppresses stderr, if other TRUE value redirect
+# stderr to stdout
# args => [ command-line arguments to the perl program ]
# verbose => print the command line
die "test.pl:runperl(): 'progs' must be an ARRAYREF " . _where()
unless ref $args{progs} eq "ARRAY";
foreach my $prog (@{$args{progs}}) {
- if ($prog =~ tr/'"// && !$args{non_portable}) {
- warn "quotes in prog >>$prog<< are not portable";
+ if (!$args{non_portable}) {
+ if ($prog =~ tr/'"//) {
+ warn "quotes in prog >>$prog<< are not portable";
+ }
+ if ($prog =~ /^([<>|]|2>)/) {
+ warn "Initial $1 in prog >>$prog<< is not portable";
+ }
+ if ($prog =~ /&\z/) {
+ warn "Trailing & in prog >>$prog<< is not portable";
+ }
}
if ($is_mswin || $is_netware || $is_vms) {
$runperl = $runperl . qq ( -e "$prog" );
$runperl = qq{$Perl -e 'print qq(} .
$args{stdin} . q{)' | } . $runperl;
}
+ } elsif (exists $args{stdin}) {
+ # Using the pipe construction above can cause fun on systems which use
+ # ksh as /bin/sh, as ksh does pipes differently (with one less process)
+ # With sh, for the command line 'perl -e 'print qq()' | perl -e ...'
+ # the sh process forks two children, which use exec to start the two
+ # perl processes. The parent shell process persists for the duration of
+ # the pipeline, and the second perl process starts with no children.
+ # With ksh (and zsh), the shell saves a process by forking a child for
+ # just the first perl process, and execing itself to start the second.
+ # This means that the second perl process starts with one child which
+ # it didn't create. This causes "fun" when if the tests assume that
+ # wait (or waitpid) will only return information about processes
+ # started within the test.
+ # They also cause fun on VMS, where the pipe implementation returns
+ # the exit code of the process at the front of the pipeline, not the
+ # end. This messes up any test using OPTION FATAL.
+ # Hence it's useful to have a way to make STDIN be at eof without
+ # needing a pipeline, so that the fork tests have a sane environment
+ # without these surprises.
+
+ # /dev/null appears to be surprisingly portable.
+ $runperl = $runperl . ($is_mswin ? ' <nul' : ' </dev/null');
}
if (defined $args{args}) {
$runperl = _quote_args($runperl, $args{args});
}
- $runperl = $runperl . ' 2>&1' if $args{stderr};
+ if (exists $args{stderr} && $args{stderr} eq 'devnull') {
+ $runperl = $runperl . ($is_mswin ? ' 2>nul' : ' 2>/dev/null');
+ }
+ elsif ($args{stderr}) {
+ $runperl = $runperl . ' 2>&1';
+ }
if ($args{verbose}) {
my $runperldisplay = $runperl;
$runperldisplay =~ s/\n/\n\#/g;
} else {
$result = `$runperl`;
}
- $result =~ s/\n\n/\n/ if $is_vms; # XXX pipes sometimes double these
+ $result =~ s/\n\n/\n/g if $is_vms; # XXX pipes sometimes double these
return $result;
}
die "Can't find temporary file name starting \"tmp$$\"";
}
+# register_tempfile - Adds a list of files to be removed at the end of the current test file
+# Arguments :
+# a list of files to be removed later
+
+# returns a count of how many file names were actually added
+
+# Reuses %tmpfiles so that tempfile() will also skip any files added here
+# even if the file doesn't exist yet.
+
+sub register_tempfile {
+ my $count = 0;
+ for( @_ ){
+ if( $tmpfiles{$_} ){
+ _print_stderr "# Temporary file '$_' already added\n";
+ }else{
+ $tmpfiles{$_} = 1;
+ $count = $count + 1;
+ }
+ }
+ return $count;
+}
+
# This is the temporary file for _fresh_perl
my $tmpfile = tempfile();
# Many tests use the same format in __DATA__ or external files to specify a
# sequence of (fresh) tests to run, extra files they may temporarily need, and
-# what the expected output is. So have excatly one copy of the code to run that
+# what the expected output is. Putting it here allows common code to serve
+# these multiple tests.
#
# Each program is source code to run followed by an "EXPECT" line, followed
# by the expected output.
print $fh $prog,"\n";
close $fh or die "Cannot close $tmpfile: $!";
my $results = runperl( stderr => 1, progfile => $tmpfile,
- stdin => '', $up
+ stdin => undef, $up
? (switches => ["-I$up/lib", $switch], nolib => 1)
: (switches => [$switch])
);
# Add END block to parent to terminate and
# clean up watchdog process
- eval "END { local \$! = 0; local \$? = 0;
- wait() if kill('KILL', $watchdog); };";
+ # Win32 watchdog is launched by cmd.exe shell, so use process group
+ # kill, otherwise the watchdog is never killed and harness waits
+ # every time for the timeout, #121395
+ eval( $is_mswin ?
+ "END { local \$! = 0; local \$? = 0;
+ wait() if kill('-KILL', $watchdog); };"
+ : "END { local \$! = 0; local \$? = 0;
+ wait() if kill('KILL', $watchdog); };");
return;
}
}
}
-my $cp_0037 = # EBCDIC code page 0037
- '\x00\x01\x02\x03\x37\x2D\x2E\x2F\x16\x05\x25\x0B\x0C\x0D\x0E\x0F' .
- '\x10\x11\x12\x13\x3C\x3D\x32\x26\x18\x19\x3F\x27\x1C\x1D\x1E\x1F' .
- '\x40\x5A\x7F\x7B\x5B\x6C\x50\x7D\x4D\x5D\x5C\x4E\x6B\x60\x4B\x61' .
- '\xF0\xF1\xF2\xF3\xF4\xF5\xF6\xF7\xF8\xF9\x7A\x5E\x4C\x7E\x6E\x6F' .
- '\x7C\xC1\xC2\xC3\xC4\xC5\xC6\xC7\xC8\xC9\xD1\xD2\xD3\xD4\xD5\xD6' .
- '\xD7\xD8\xD9\xE2\xE3\xE4\xE5\xE6\xE7\xE8\xE9\xBA\xE0\xBB\xB0\x6D' .
- '\x79\x81\x82\x83\x84\x85\x86\x87\x88\x89\x91\x92\x93\x94\x95\x96' .
- '\x97\x98\x99\xA2\xA3\xA4\xA5\xA6\xA7\xA8\xA9\xC0\x4F\xD0\xA1\x07' .
- '\x20\x21\x22\x23\x24\x15\x06\x17\x28\x29\x2A\x2B\x2C\x09\x0A\x1B' .
- '\x30\x31\x1A\x33\x34\x35\x36\x08\x38\x39\x3A\x3B\x04\x14\x3E\xFF' .
- '\x41\xAA\x4A\xB1\x9F\xB2\x6A\xB5\xBD\xB4\x9A\x8A\x5F\xCA\xAF\xBC' .
- '\x90\x8F\xEA\xFA\xBE\xA0\xB6\xB3\x9D\xDA\x9B\x8B\xB7\xB8\xB9\xAB' .
- '\x64\x65\x62\x66\x63\x67\x9E\x68\x74\x71\x72\x73\x78\x75\x76\x77' .
- '\xAC\x69\xED\xEE\xEB\xEF\xEC\xBF\x80\xFD\xFE\xFB\xFC\xAD\xAE\x59' .
- '\x44\x45\x42\x46\x43\x47\x9C\x48\x54\x51\x52\x53\x58\x55\x56\x57' .
- '\x8C\x49\xCD\xCE\xCB\xCF\xCC\xE1\x70\xDD\xDE\xDB\xDC\x8D\x8E\xDF';
-
-my $cp_1047 = # EBCDIC code page 1047
- '\x00\x01\x02\x03\x37\x2D\x2E\x2F\x16\x05\x15\x0B\x0C\x0D\x0E\x0F' .
- '\x10\x11\x12\x13\x3C\x3D\x32\x26\x18\x19\x3F\x27\x1C\x1D\x1E\x1F' .
- '\x40\x5A\x7F\x7B\x5B\x6C\x50\x7D\x4D\x5D\x5C\x4E\x6B\x60\x4B\x61' .
- '\xF0\xF1\xF2\xF3\xF4\xF5\xF6\xF7\xF8\xF9\x7A\x5E\x4C\x7E\x6E\x6F' .
- '\x7C\xC1\xC2\xC3\xC4\xC5\xC6\xC7\xC8\xC9\xD1\xD2\xD3\xD4\xD5\xD6' .
- '\xD7\xD8\xD9\xE2\xE3\xE4\xE5\xE6\xE7\xE8\xE9\xAD\xE0\xBD\x5F\x6D' .
- '\x79\x81\x82\x83\x84\x85\x86\x87\x88\x89\x91\x92\x93\x94\x95\x96' .
- '\x97\x98\x99\xA2\xA3\xA4\xA5\xA6\xA7\xA8\xA9\xC0\x4F\xD0\xA1\x07' .
- '\x20\x21\x22\x23\x24\x25\x06\x17\x28\x29\x2A\x2B\x2C\x09\x0A\x1B' .
- '\x30\x31\x1A\x33\x34\x35\x36\x08\x38\x39\x3A\x3B\x04\x14\x3E\xFF' .
- '\x41\xAA\x4A\xB1\x9F\xB2\x6A\xB5\xBB\xB4\x9A\x8A\xB0\xCA\xAF\xBC' .
- '\x90\x8F\xEA\xFA\xBE\xA0\xB6\xB3\x9D\xDA\x9B\x8B\xB7\xB8\xB9\xAB' .
- '\x64\x65\x62\x66\x63\x67\x9E\x68\x74\x71\x72\x73\x78\x75\x76\x77' .
- '\xAC\x69\xED\xEE\xEB\xEF\xEC\xBF\x80\xFD\xFE\xFB\xFC\xBA\xAE\x59' .
- '\x44\x45\x42\x46\x43\x47\x9C\x48\x54\x51\x52\x53\x58\x55\x56\x57' .
- '\x8C\x49\xCD\xCE\xCB\xCF\xCC\xE1\x70\xDD\xDE\xDB\xDC\x8D\x8E\xDF';
-
-my $cp_bc = # EBCDIC code page POSiX-BC
- '\x00\x01\x02\x03\x37\x2D\x2E\x2F\x16\x05\x15\x0B\x0C\x0D\x0E\x0F' .
- '\x10\x11\x12\x13\x3C\x3D\x32\x26\x18\x19\x3F\x27\x1C\x1D\x1E\x1F' .
- '\x40\x5A\x7F\x7B\x5B\x6C\x50\x7D\x4D\x5D\x5C\x4E\x6B\x60\x4B\x61' .
- '\xF0\xF1\xF2\xF3\xF4\xF5\xF6\xF7\xF8\xF9\x7A\x5E\x4C\x7E\x6E\x6F' .
- '\x7C\xC1\xC2\xC3\xC4\xC5\xC6\xC7\xC8\xC9\xD1\xD2\xD3\xD4\xD5\xD6' .
- '\xD7\xD8\xD9\xE2\xE3\xE4\xE5\xE6\xE7\xE8\xE9\xBB\xBC\xBD\x6A\x6D' .
- '\x4A\x81\x82\x83\x84\x85\x86\x87\x88\x89\x91\x92\x93\x94\x95\x96' .
- '\x97\x98\x99\xA2\xA3\xA4\xA5\xA6\xA7\xA8\xA9\xFB\x4F\xFD\xFF\x07' .
- '\x20\x21\x22\x23\x24\x25\x06\x17\x28\x29\x2A\x2B\x2C\x09\x0A\x1B' .
- '\x30\x31\x1A\x33\x34\x35\x36\x08\x38\x39\x3A\x3B\x04\x14\x3E\x5F' .
- '\x41\xAA\xB0\xB1\x9F\xB2\xD0\xB5\x79\xB4\x9A\x8A\xBA\xCA\xAF\xA1' .
- '\x90\x8F\xEA\xFA\xBE\xA0\xB6\xB3\x9D\xDA\x9B\x8B\xB7\xB8\xB9\xAB' .
- '\x64\x65\x62\x66\x63\x67\x9E\x68\x74\x71\x72\x73\x78\x75\x76\x77' .
- '\xAC\x69\xED\xEE\xEB\xEF\xEC\xBF\x80\xE0\xFE\xDD\xFC\xAD\xAE\x59' .
- '\x44\x45\x42\x46\x43\x47\x9C\x48\x54\x51\x52\x53\x58\x55\x56\x57' .
- '\x8C\x49\xCD\xCE\xCB\xCF\xCC\xE1\x70\xC0\xDE\xDB\xDC\x8D\x8E\xDF';
-
-my $straight = # Avoid ranges
- '\x00\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0A\x0B\x0C\x0D\x0E\x0F' .
- '\x10\x11\x12\x13\x14\x15\x16\x17\x18\x19\x1A\x1B\x1C\x1D\x1E\x1F' .
- '\x20\x21\x22\x23\x24\x25\x26\x27\x28\x29\x2A\x2B\x2C\x2D\x2E\x2F' .
- '\x30\x31\x32\x33\x34\x35\x36\x37\x38\x39\x3A\x3B\x3C\x3D\x3E\x3F' .
- '\x40\x41\x42\x43\x44\x45\x46\x47\x48\x49\x4A\x4B\x4C\x4D\x4E\x4F' .
- '\x50\x51\x52\x53\x54\x55\x56\x57\x58\x59\x5A\x5B\x5C\x5D\x5E\x5F' .
- '\x60\x61\x62\x63\x64\x65\x66\x67\x68\x69\x6A\x6B\x6C\x6D\x6E\x6F' .
- '\x70\x71\x72\x73\x74\x75\x76\x77\x78\x79\x7A\x7B\x7C\x7D\x7E\x7F' .
- '\x80\x81\x82\x83\x84\x85\x86\x87\x88\x89\x8A\x8B\x8C\x8D\x8E\x8F' .
- '\x90\x91\x92\x93\x94\x95\x96\x97\x98\x99\x9A\x9B\x9C\x9D\x9E\x9F' .
- '\xA0\xA1\xA2\xA3\xA4\xA5\xA6\xA7\xA8\xA9\xAA\xAB\xAC\xAD\xAE\xAF' .
- '\xB0\xB1\xB2\xB3\xB4\xB5\xB6\xB7\xB8\xB9\xBA\xBB\xBC\xBD\xBE\xBF' .
- '\xC0\xC1\xC2\xC3\xC4\xC5\xC6\xC7\xC8\xC9\xCA\xCB\xCC\xCD\xCE\xCF' .
- '\xD0\xD1\xD2\xD3\xD4\xD5\xD6\xD7\xD8\xD9\xDA\xDB\xDC\xDD\xDE\xDF' .
- '\xE0\xE1\xE2\xE3\xE4\xE5\xE6\xE7\xE8\xE9\xEA\xEB\xEC\xED\xEE\xEF' .
- '\xF0\xF1\xF2\xF3\xF4\xF5\xF6\xF7\xF8\xF9\xFA\xFB\xFC\xFD\xFE\xFF';
-
-# The following 2 functions allow tests to work on both EBCDIC and
-# ASCII-ish platforms. They convert string scalars between the native
-# character set and the set of 256 characters which is usually called
-# Latin1.
-#
-# These routines don't work on UTF-EBCDIC and UTF-8.
-
-sub native_to_latin1($) {
- my $string = shift;
-
- return $string if ord('^') == 94; # ASCII, Latin1
- my $cp;
- if (ord('^') == 95) { # EBCDIC 1047
- $cp = \$cp_1047;
- }
- elsif (ord('^') == 106) { # EBCDIC POSIX-BC
- $cp = \$cp_bc;
- }
- elsif (ord('^') == 176) { # EBCDIC 037 */
- $cp = \$cp_0037;
- }
- else {
- die "Unknown native character set";
- }
-
- eval '$string =~ tr/' . $$cp . '/' . $straight . '/';
- return $string;
-}
-
-sub latin1_to_native($) {
- my $string = shift;
-
- return $string if ord('^') == 94; # ASCII, Latin1
- my $cp;
- if (ord('^') == 95) { # EBCDIC 1047
- $cp = \$cp_1047;
- }
- elsif (ord('^') == 106) { # EBCDIC POSIX-BC
- $cp = \$cp_bc;
- }
- elsif (ord('^') == 176) { # EBCDIC 037 */
- $cp = \$cp_0037;
- }
- else {
- die "Unknown native character set";
- }
-
- eval '$string =~ tr/' . $straight . '/' . $$cp . '/';
- return $string;
-}
-
-sub ord_latin1_to_native {
- # given an input code point, return the platform's native
- # equivalent value. Anything above latin1 is itself.
-
- my $ord = shift;
- return $ord if $ord > 255;
- return ord latin1_to_native(chr $ord);
-}
-
-sub ord_native_to_latin1 {
- # given an input platform code point, return the latin1 equivalent value.
- # Anything above latin1 is itself.
-
- my $ord = shift;
- return $ord if $ord > 255;
- return ord native_to_latin1(chr $ord);
-}
-
1;
https://perl5.git.perl.org / perl5.git / blobdiff