/* op.h
*
* Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- * 2000, 2001, 2002, 2003, 2004, 2005, 2006 by Larry Wall and others
+ * 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, by Larry Wall and others
*
* You may distribute under the terms of either the GNU General Public
* License or the Artistic License, as specified in the README file.
* op_type The type of the operation.
* op_opt Whether or not the op has been optimised by the
* peephole optimiser.
- * op_static Whether or not the op is statically defined.
- * This flag is used by the B::C compiler backend
- * and indicates that the op should not be freed.
*
* See the comments in S_clear_yystack() for more
* details on the following three flags:
-
+ *
* op_latefree tell op_free() to clear this op (and free any kids)
* but not yet deallocate the struct. This means that
* the op may be safely op_free()d multiple times
* op_latefreed an op_latefree op has been op_free()d
* op_attached this op (sub)tree has been attached to a CV
*
- * op_spare two spare bits!
+ * op_spare three spare bits!
* op_flags Flags common to all operations. See OPf_* below.
* op_private Flags peculiar to a particular operation (BUT,
* by default, set to the number of children until
* which may or may not check number of children).
*/
-#ifdef DEBUGGING_OPS
-#define OPCODE opcode
-#else
#define OPCODE U16
-#endif
#ifdef PERL_MAD
# define MADPROP_IN_BASEOP MADPROP* op_madprop;
# define MADPROP_IN_BASEOP
#endif
+typedef PERL_BITFIELD16 Optype;
+
#ifdef BASEOP_DEFINITION
#define BASEOP BASEOP_DEFINITION
#else
OP* (CPERLscope(*op_ppaddr))(pTHX); \
MADPROP_IN_BASEOP \
PADOFFSET op_targ; \
- unsigned op_type:9; \
- unsigned op_opt:1; \
- unsigned op_static:1; \
- unsigned op_latefree:1; \
- unsigned op_latefreed:1; \
- unsigned op_attached:1; \
- unsigned op_spare:2; \
+ PERL_BITFIELD16 op_type:9; \
+ PERL_BITFIELD16 op_opt:1; \
+ PERL_BITFIELD16 op_latefree:1; \
+ PERL_BITFIELD16 op_latefreed:1; \
+ PERL_BITFIELD16 op_attached:1; \
+ PERL_BITFIELD16 op_spare:3; \
U8 op_flags; \
U8 op_private;
#endif
+/* If op_type:9 is changed to :10, also change PUSHEVAL in cop.h.
+ Also, if the type of op_type is ever changed (e.g. to PERL_BITFIELD32)
+ then all the other bit-fields before/after it should change their
+ types too to let VC pack them into the same 4 byte integer.*/
+
#define OP_GIMME(op,dfl) \
(((op)->op_flags & OPf_WANT) == OPf_WANT_VOID ? G_VOID : \
((op)->op_flags & OPf_WANT) == OPf_WANT_SCALAR ? G_SCALAR : \
((op)->op_flags & OPf_WANT) == OPf_WANT_LIST ? G_ARRAY : \
dfl)
+#define OP_GIMME_REVERSE(flags) ((flags) & G_WANT)
+
/*
=head1 "Gimme" Values
#define OPf_STACKED 64 /* Some arg is arriving on the stack. */
#define OPf_SPECIAL 128 /* Do something weird for this op: */
/* On local LVAL, don't init local value. */
- /* On OP_CONST, value is the hints hash for
- eval, so return a copy from pp_const() */
/* On OP_SORT, subroutine is inlined. */
/* On OP_NOT, inversion was implicit. */
/* On OP_LEAVE, don't restore curpm. */
/* On OP_EXISTS, treat av as av, not avhv. */
/* On OP_(ENTER|LEAVE)EVAL, don't clear $@ */
/* On OP_ENTERITER, loop var is per-thread */
- /* On pushre, re is /\s+/ imp. by split " " */
+ /* On pushre, rx is used as part of split, e.g. split " " */
/* On regcomp, "use re 'eval'" was in scope */
/* On OP_READLINE, was <$filehandle> */
/* On RV2[ACGHS]V, don't create GV--in
#define OPpENTERSUB_DB 16 /* Debug subroutine. */
#define OPpENTERSUB_HASTARG 32 /* Called from OP tree. */
#define OPpENTERSUB_NOMOD 64 /* Immune to mod() for :attrlist. */
- /* OP_RV2CV only */
+ /* OP_ENTERSUB and OP_RV2CV only */
#define OPpENTERSUB_AMPER 8 /* Used & form to call. */
#define OPpENTERSUB_NOPAREN 128 /* bare sub call (without parens) */
#define OPpENTERSUB_INARGS 4 /* Lval used as arg to a sub. */
#define OPpSORT_QSORT 32 /* Use quicksort (not mergesort) */
#define OPpSORT_STABLE 64 /* Use a stable algorithm */
-/* Private for OP_THREADSV */
-#define OPpDONE_SVREF 64 /* Been through newSVREF once */
-
/* Private for OP_OPEN and OP_BACKTICK */
#define OPpOPEN_IN_RAW 16 /* binmode(F,":raw") on input fh */
#define OPpOPEN_IN_CRLF 32 /* binmode(F,":crlf") on input fh */
/* Private for OP_FTXXX */
#define OPpFT_ACCESS 2 /* use filetest 'access' */
#define OPpFT_STACKED 4 /* stacked filetest, as in "-f -x $f" */
-#define OP_IS_FILETEST_ACCESS(op) \
- (((op)->op_type) == OP_FTRREAD || \
- ((op)->op_type) == OP_FTRWRITE || \
- ((op)->op_type) == OP_FTREXEC || \
- ((op)->op_type) == OP_FTEREAD || \
- ((op)->op_type) == OP_FTEWRITE || \
- ((op)->op_type) == OP_FTEEXEC)
/* Private for OP_(MAP|GREP)(WHILE|START) */
#define OPpGREP_LEX 2 /* iterate over lexical $_ */
struct pmop {
BASEOP
- /* On LP64 putting this here takes advantage of the fact that BASEOP isn't
- an exact multiple of 8 bytes to save structure padding. */
OP * op_first;
OP * op_last;
#ifdef USE_ITHREADS
};
#ifdef USE_ITHREADS
-#define PM_GETRE(o) (INT2PTR(REGEXP*,SvIVX(PL_regex_pad[(o)->op_pmoffset])))
-#define PM_SETRE(o,r) STMT_START { \
- SV* const sv = PL_regex_pad[(o)->op_pmoffset]; \
- sv_setiv(sv, PTR2IV(r)); \
+#define PM_GETRE(o) (SvTYPE(PL_regex_pad[(o)->op_pmoffset]) == SVt_REGEXP \
+ ? (REGEXP*)(PL_regex_pad[(o)->op_pmoffset]) : NULL)
+/* The assignment is just to enforce type safety (or at least get a warning).
+ */
+/* With first class regexps not via a reference one needs to assign
+ &PL_sv_undef under ithreads. (This would probably work unthreaded, but NULL
+ is cheaper. I guess we could allow NULL, but the check above would get
+ more complex, and we'd have an AV with (SV*)NULL in it, which feels bad */
+/* BEWARE - something that calls this macro passes (r) which has a side
+ effect. */
+#define PM_SETRE(o,r) STMT_START { \
+ const REGEXP *const _pm_setre = (r); \
+ assert(_pm_setre); \
+ PL_regex_pad[(o)->op_pmoffset] = (SV*)_pm_setre; \
} STMT_END
-#define PM_GETRE_SAFE(o) (PL_regex_pad ? PM_GETRE(o) : (REGEXP*)0)
-#define PM_SETRE_SAFE(o,r) if (PL_regex_pad) PM_SETRE(o,r)
#else
#define PM_GETRE(o) ((o)->op_pmregexp)
#define PM_SETRE(o,r) ((o)->op_pmregexp = (r))
-#define PM_GETRE_SAFE PM_GETRE
-#define PM_SETRE_SAFE PM_SETRE
#endif
-#define PMf_RETAINT 0x0001 /* taint $1 etc. if target tainted */
-#define PMf_ONCE 0x0002 /* match successfully only once per
+#define PMf_RETAINT 0x00000040 /* taint $1 etc. if target tainted */
+#define PMf_ONCE 0x00000080 /* match successfully only once per
reset, with related flag RXf_USED
in re->extflags holding state.
This is used only for ?? matches,
and only on OP_MATCH and OP_QR */
-#define PMf_UNUSED 0x0004 /* free for use */
-#define PMf_MAYBE_CONST 0x0008 /* replacement contains variables */
+#define PMf_UNUSED 0x00000100 /* free for use */
+#define PMf_MAYBE_CONST 0x00000200 /* replacement contains variables */
-#define PMf_USED 0x0010 /* PMf_ONCE has matched successfully.
+#define PMf_USED 0x00000400 /* PMf_ONCE has matched successfully.
Not used under threading. */
-#define PMf_CONST 0x0040 /* subst replacement is constant */
-#define PMf_KEEP 0x0080 /* keep 1st runtime pattern forever */
-#define PMf_GLOBAL 0x0100 /* pattern had a g modifier */
-#define PMf_CONTINUE 0x0200 /* don't reset pos() if //g fails */
-#define PMf_EVAL 0x0400 /* evaluating replacement as expr */
+#define PMf_CONST 0x00000800 /* subst replacement is constant */
+#define PMf_KEEP 0x00001000 /* keep 1st runtime pattern forever */
+#define PMf_GLOBAL 0x00002000 /* pattern had a g modifier */
+#define PMf_CONTINUE 0x00004000 /* don't reset pos() if //g fails */
+#define PMf_EVAL 0x00008000 /* evaluating replacement as expr */
/* The following flags have exact equivalents in regcomp.h with the prefix RXf_
- * which are stored in the regexp->extflags member.
+ * which are stored in the regexp->extflags member. If you change them here,
+ * you have to change them there, and vice versa.
*/
-#define PMf_LOCALE 0x00800 /* use locale for character types */
-#define PMf_MULTILINE 0x01000 /* assume multiple lines */
-#define PMf_SINGLELINE 0x02000 /* assume single line */
-#define PMf_FOLD 0x04000 /* case insensitivity */
-#define PMf_EXTENDED 0x08000 /* chuck embedded whitespace */
-#define PMf_KEEPCOPY 0x10000 /* copy the string when matching */
+#define PMf_MULTILINE 0x00000001 /* assume multiple lines */
+#define PMf_SINGLELINE 0x00000002 /* assume single line */
+#define PMf_FOLD 0x00000004 /* case insensitivity */
+#define PMf_EXTENDED 0x00000008 /* chuck embedded whitespace */
+#define PMf_KEEPCOPY 0x00000010 /* copy the string when matching */
+#define PMf_LOCALE 0x00000020 /* use locale for character types */
/* mask of bits that need to be transfered to re->extflags */
#define PMf_COMPILETIME (PMf_MULTILINE|PMf_SINGLELINE|PMf_LOCALE|PMf_FOLD|PMf_EXTENDED|PMf_KEEPCOPY)
#define cSVOPo_sv cSVOPx_sv(o)
#define kSVOP_sv cSVOPx_sv(kid)
-#define Nullop Null(OP*)
+#ifndef PERL_CORE
+# define Nullop ((OP*)NULL)
+#endif
/* Lowest byte-and-a-bit of PL_opargs */
#define OA_MARK 1
struct madprop {
MADPROP* mad_next;
- void *mad_val;
+ const void *mad_val;
U32 mad_vlen;
/* short mad_count; */
char mad_key;
#endif
/*
- * Values that can be hold by mad_key :
+ * Values that can be held by mad_key :
* ^ unfilled head spot
* , literal ,
* ; literal ; (blank if implicit ; at end of block)
https://perl5.git.perl.org / perl5.git / blobdiff