#define BIN "$bin" /**/
#define BIN_EXP "$binexp" /**/
-/* CPPSTDIN:
- * This symbol contains the first part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. Typical value of "cc -E" or "/lib/cpp", but it can also
- * call a wrapper. See CPPRUN.
- */
-/* CPPMINUS:
- * This symbol contains the second part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. This symbol will have the value "-" if CPPSTDIN needs a minus
- * to specify standard input, otherwise the value is "".
- */
-#define CPPSTDIN "$cppstdin"
-#define CPPMINUS "$cppminus"
-
/* HAS_ALARM:
* This symbol, if defined, indicates that the alarm routine is
* available.
*/
#$d_getgrps HAS_GETGROUPS /**/
-/* HAS_UNAME:
- * This symbol, if defined, indicates that the C program may use the
- * uname() routine to derive the host name. See also HAS_GETHOSTNAME
- * and PHOSTNAME.
- */
-#$d_uname HAS_UNAME /**/
-
/* HAS_GETLOGIN:
* This symbol, if defined, indicates that the getlogin routine is
* available to get the login name.
*/
#$d_getprior HAS_GETPRIORITY /**/
-/* HAS_HTONL:
- * This symbol, if defined, indicates that the htonl() routine (and
- * friends htons() ntohl() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_HTONS:
- * This symbol, if defined, indicates that the htons() routine (and
- * friends htonl() ntohl() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_NTOHL:
- * This symbol, if defined, indicates that the ntohl() routine (and
- * friends htonl() htons() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_NTOHS:
- * This symbol, if defined, indicates that the ntohs() routine (and
- * friends htonl() htons() ntohl()) are available to do network
- * order byte swapping.
- */
-#$d_htonl HAS_HTONL /**/
-#$d_htonl HAS_HTONS /**/
-#$d_htonl HAS_NTOHL /**/
-#$d_htonl HAS_NTOHS /**/
-
/* HAS_INET_ATON:
* This symbol, if defined, indicates to the C program that the
* inet_aton() function is available to parse IP address "dotted-quad"
*/
#$d_mkfifo HAS_MKFIFO /**/
-/* HAS_MKNOD:
- * This symbol, if defined, indicates that the mknod routine is
- * available to create character and block special files. Otherwise,
- * mknod should be able to do it for you. However, if mknod is there,
- * mknod might require super-user privileges which mknod will not.
- */
-#$d_mknod HAS_MKNOD /**/
-
/* HAS_MKTIME:
* This symbol, if defined, indicates that the mktime routine is
* available.
*/
#$d_mktime HAS_MKTIME /**/
-/* HAS_MSG:
- * This symbol, if defined, indicates that the entire msg*(2) library is
- * supported (IPC mechanism based on message queues).
+/* HAS_MSYNC:
+ * This symbol, if defined, indicates that the msync system call is
+ * available to synchronize a mapped file.
*/
-#$d_msg HAS_MSG /**/
+#$d_msync HAS_MSYNC /**/
+
+/* HAS_MUNMAP:
+ * This symbol, if defined, indicates that the munmap system call is
+ * available to unmap a region, usually mapped by mmap().
+ */
+#$d_munmap HAS_MUNMAP /**/
/* HAS_NICE:
* This symbol, if defined, indicates that the nice routine is
*/
#$d_select HAS_SELECT /**/
-/* HAS_SEM:
- * This symbol, if defined, indicates that the entire sem*(2) library is
- * supported.
- */
-#$d_sem HAS_SEM /**/
-
/* HAS_SETEGID:
* This symbol, if defined, indicates that the setegid routine is available
* to change the effective gid of the current program.
*/
#$d_setsid HAS_SETSID /**/
-/* HAS_SHM:
- * This symbol, if defined, indicates that the entire shm*(2) library is
- * supported.
- */
-#$d_shm HAS_SHM /**/
-
/* Shmat_t:
* This symbol holds the return type of the shmat() system call.
* Usually set to 'void *' or 'char *'.
/* HAS_SHMAT_PROTOTYPE:
* This symbol, if defined, indicates that the sys/shm.h includes
* a prototype for shmat(). Otherwise, it is up to the program to
- * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
+ * guess one. Shmat_t shmat (int, Shmat_t, int) is a good guess,
* but not always right so it should be emitted by the program only
* when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
*/
#define Shmat_t $shmattype /**/
#$d_shmatprototype HAS_SHMAT_PROTOTYPE /**/
-/* USE_STAT_BLOCKS:
- * This symbol is defined if this system has a stat structure declaring
- * st_blksize and st_blocks.
- */
-#$d_statblks USE_STAT_BLOCKS /**/
-
/* HAS_STRCHR:
* This symbol is defined to indicate that the strchr()/strrchr()
* functions are available for string searching. If not, try the
*/
#$d_strctcpy USE_STRUCT_COPY /**/
-/* HAS_STRERROR:
- * This symbol, if defined, indicates that the strerror routine is
- * available to translate error numbers to strings. See the writeup
- * of Strerror() in this file before you try to define your own.
- */
-/* HAS_SYS_ERRLIST:
- * This symbol, if defined, indicates that the sys_errlist array is
- * available to translate error numbers to strings. The extern int
- * sys_nerr gives the size of that table.
- */
-/* Strerror:
- * This preprocessor symbol is defined as a macro if strerror() is
- * not available to translate error numbers to strings but sys_errlist[]
- * array is there.
- */
-#$d_strerror HAS_STRERROR /**/
-#$d_syserrlst HAS_SYS_ERRLIST /**/
-#define Strerror(e) $d_strerrm
-
/* HAS_STRTOD:
* This symbol, if defined, indicates that the strtod routine is
* available to provide better numeric string conversion than atof().
*/
#$d_umask HAS_UMASK /**/
-/* HAS_VFORK:
- * This symbol, if defined, indicates that vfork() exists.
- */
-#$d_vfork HAS_VFORK /**/
-
/* HASVOLATILE:
* This symbol, if defined, indicates that this C compiler knows about
* the volatile declaration.
*/
#$d_wctomb HAS_WCTOMB /**/
+/* I_ARPA_INET:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <arpa/inet.h> to get inet_addr and friends declarations.
+ */
+#$i_arpainet I_ARPA_INET /**/
+
/* I_DBM:
* This symbol, if defined, indicates that <dbm.h> exists and should
* be included.
*/
#$i_float I_FLOAT /**/
-/* I_GRP:
- * This symbol, if defined, indicates to the C program that it should
- * include <grp.h>.
- */
-#$i_grp I_GRP /**/
-
/* I_LIMITS:
* This symbol, if defined, indicates to the C program that it should
* include <limits.h> to get definition of symbols like WORD_BIT or
*/
#$i_vfork I_VFORK /**/
-/* Free_t:
- * This variable contains the return type of free(). It is usually
- * void, but occasionally int.
- */
-/* Malloc_t:
- * This symbol is the type of pointer returned by malloc and realloc.
- */
-#define Malloc_t $malloctype /**/
-#define Free_t $freetype /**/
-
-/* MYMALLOC:
- * This symbol, if defined, indicates that we're using our own malloc.
- */
-#$d_mymalloc MYMALLOC /**/
-
/* CAN_PROTOTYPE:
* If defined, this macro indicates that the C compiler can handle
* function prototypes.
*/
#define STDCHAR $stdchar /**/
-/* VOIDFLAGS:
- * This symbol indicates how much support of the void type is given by this
- * compiler. What various bits mean:
- *
- * 1 = supports declaration of void
- * 2 = supports arrays of pointers to functions returning void
- * 4 = supports comparisons between pointers to void functions and
- * addresses of void functions
- * 8 = suports declaration of generic void pointers
- *
- * The package designer should define VOIDUSED to indicate the requirements
- * of the package. This can be done either by #defining VOIDUSED before
- * including config.h, or by defining defvoidused in Myinit.U. If the
- * latter approach is taken, only those flags will be tested. If the
- * level of void support necessary is not present, defines void to int.
+/* HAS_ACCESSX:
+ * This symbol, if defined, indicates that the accessx routine is
+ * available to do extended access checks.
*/
-#ifndef VOIDUSED
-#define VOIDUSED $defvoidused
-#endif
-#define VOIDFLAGS $voidflags
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int /* is void to be avoided? */
-#define M_VOID /* Xenix strikes again */
-#endif
+#$d_accessx HAS_ACCESSX /**/
+
+/* HAS_EACCESS:
+ * This symbol, if defined, indicates that the eaccess routine is
+ * available to do extended access checks.
+ */
+#$d_eaccess HAS_EACCESS /**/
+
+/* I_SYS_ACCESS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/access.h>.
+ */
+#$i_sysaccess I_SYS_ACCESS /**/
+
+/* I_SYS_SECURITY:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/security.h>.
+ */
+#$i_syssecrt I_SYS_SECURITY /**/
+
+/* CROSSCOMPILE:
+ * This symbol, if defined, signifies that we our
+ * build process is a cross-compilation.
+ */
+#$crosscompile CROSSCOMPILE /**/
+
+/* INTSIZE:
+ * This symbol contains the value of sizeof(int) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* LONGSIZE:
+ * This symbol contains the value of sizeof(long) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* SHORTSIZE:
+ * This symbol contains the value of sizeof(short) so that the C
+ * preprocessor can make decisions based on it.
+ */
+#define INTSIZE $intsize /**/
+#define LONGSIZE $longsize /**/
+#define SHORTSIZE $shortsize /**/
+
+/* MULTIARCH:
+ * This symbol, if defined, signifies that the build
+ * process will produce some binary files that are going to be
+ * used in a cross-platform environment. This is the case for
+ * example with the NeXT "fat" binaries that contain executables
+ * for several CPUs.
+ */
+#$multiarch MULTIARCH /**/
/* MEM_ALIGNBYTES:
- * This symbol contains the number of bytes required to align a
- * double. Usual values are 2, 4 and 8.
- * On NeXT starting with 3.2, you can build "Fat" Multiple Architecture
- * Binaries (MAB) for targets with varying alignment. This only matters
- * for perl, where the config.h can be generated and installed on one
- * system, and used by a different architecture to build an extension.
- * The default is eight, for safety.
+ * This symbol contains the number of bytes required to align a
+ * double. Usual values are 2, 4 and 8. The default is eight,
+ * for safety.
*/
-#define MEM_ALIGNBYTES $alignbytes /**/
+#if defined(CROSSCOMPILE) || defined(MULTIARCH)
+# define MEM_ALIGNBYTES 8
+#else
+#define MEM_ALIGNBYTES $alignbytes
+#endif
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
* i.e. 0x1234 or 0x4321, etc...
+ * If the compiler supports cross-compiling or multiple-architecture
+ * binaries (eg. on NeXT systems), use compiler-defined macros to
+ * determine the byte order.
* On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
* Binaries (MAB) on either big endian or little endian machines.
* The endian-ness is available at compile-time. This only matters
* so the default case (for NeXT) is big endian to catch them.
* This might matter for NeXT 3.0.
*/
-#ifndef NeXT
+#if defined(CROSSCOMPILE) || defined(MULTIARCH)
+# ifdef __LITTLE_ENDIAN__
+# if LONGSIZE == 4
+# define BYTEORDER 0x1234
+# else
+# if LONGSIZE == 8
+# define BYTEORDER 0x12345678
+# endif
+# endif
+# else
+# ifdef __BIG_ENDIAN__
+# if LONGSIZE == 4
+# define BYTEORDER 0x4321
+# else
+# if LONGSIZE == 8
+# define BYTEORDER 0x87654321
+# endif
+# endif
+# endif
+# endif
+# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
+# define BYTEORDER 0x4321
+# endif
+#else
#define BYTEORDER 0x$byteorder /* large digits for MSB */
-#else /* NeXT */
-#ifdef __LITTLE_ENDIAN__
-#define BYTEORDER 0x1234
-#else /* __BIG_ENDIAN__ */
-#define BYTEORDER 0x4321
-#endif /* ENDIAN CHECK */
#endif /* NeXT */
/* CASTI32:
*/
#$d_void_closedir VOID_CLOSEDIR /**/
+/* HAS_FD_SET:
+ * This symbol, when defined, indicates presence of the fd_set typedef
+ * in <sys/types.h>
+ */
+#$d_fd_set HAS_FD_SET /**/
+
/* Gconvert:
* This preprocessor macro is defined to convert a floating point
* number to a string without a trailing decimal point. This
*/
#$d_sigaction HAS_SIGACTION /**/
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
/* Sigjmp_buf:
* This is the buffer type to be used with Sigsetjmp and Siglongjmp.
*/
#$i_systime I_SYS_TIME /**/
#$i_systimek I_SYS_TIME_KERNEL /**/
-/* INTSIZE:
- * This symbol contains the value of sizeof(int) so that the C
- * preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- * This symbol contains the value of sizeof(long) so that the C
- * preprocessor can make decisions based on it.
- */
-/* SHORTSIZE:
- * This symbol contains the value of sizeof(short) so that the C
- * preprocessor can make decisions based on it.
- */
-#define INTSIZE $intsize /**/
-#define LONGSIZE $longsize /**/
-#define SHORTSIZE $shortsize /**/
-
/* VAL_O_NONBLOCK:
* This symbol is to be used during open() or fcntl(F_SETFL) to turn on
* non-blocking I/O for the file descriptor. Note that there is no way
*/
#define PTRSIZE $ptrsize /**/
+/* Drand01:
+ * This macro is to be used to generate uniformly distributed
+ * random numbers over the range [0., 1.[. You may have to supply
+ * an 'extern double drand48();' in your program since SunOS 4.1.3
+ * doesn't provide you with anything relevant in it's headers.
+ * See HAS_DRAND48_PROTO.
+ */
+/* Rand_seed_t:
+ * This symbol defines the type of the argument of the
+ * random seed function.
+ */
+/* seedDrand01:
+ * This symbol defines the macro to be used in seeding the
+ * random number generator (see Drand01).
+ */
/* RANDBITS:
- * This symbol contains the number of bits of random number the rand()
- * function produces. Usual values are 15, 16, and 31.
+ * This symbol indicates how many bits are produced by the
+ * function used to generate normalized random numbers.
+ * Values include 15, 16, 31, and 48.
*/
-#define RANDBITS $randbits /**/
+#define Drand01() $drand01 /**/
+#define Rand_seed_t $randseedtype /**/
+#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/
+#define RANDBITS $randbits /**/
/* SSize_t:
* This symbol holds the type used by functions that return
*/
#define SSize_t $ssizetype /* signed count of bytes */
+/* EBCDIC:
+ * This symbol, if defined, indicates that this system uses
+ * EBCDIC encoding.
+ */
+#$ebcdic EBCDIC /**/
+
/* OSNAME:
* This symbol contains the name of the operating system, as determined
* by Configure. You shouldn't rely on it too much; the specific
*/
#define OSNAME "$osname" /**/
-/* ARCHLIB:
- * This variable, if defined, holds the name of the directory in
- * which the user wants to put architecture-dependent public
- * library files for $package. It is most often a local directory
- * such as /usr/local/lib. Programs using this variable must be
- * prepared to deal with filename expansion. If ARCHLIB is the
- * same as PRIVLIB, it is not defined, since presumably the
- * program already searches PRIVLIB.
- */
-/* ARCHLIB_EXP:
- * This symbol contains the ~name expanded version of ARCHLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#$d_archlib ARCHLIB "$archlib" /**/
-#$d_archlib ARCHLIB_EXP "$archlibexp" /**/
-
/* CAT2:
* This macro catenates 2 tokens together.
*/
#include "Bletch: How does this C preprocessor catenate tokens?"
#endif
+/* CPPSTDIN:
+ * This symbol contains the first part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. Typical value of "cc -E" or "/lib/cpp", but it can also
+ * call a wrapper. See CPPRUN.
+ */
+/* CPPMINUS:
+ * This symbol contains the second part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. This symbol will have the value "-" if CPPSTDIN needs a minus
+ * to specify standard input, otherwise the value is "".
+ */
+/* CPPRUN:
+ * This symbol contains the string which will invoke a C preprocessor on
+ * the standard input and produce to standard output. It needs to end
+ * with CPPLAST, after all other preprocessor flags have been specified.
+ * The main difference with CPPSTDIN is that this program will never be a
+ * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
+ * available directly to the user. Note that it may well be different from
+ * the preprocessor used to compile the C program.
+ */
+#define CPPSTDIN "$cppstdin"
+#define CPPMINUS "$cppminus"
+#define CPPRUN "$cpprun"
+
+/* HAS_ACCESS:
+ * This manifest constant lets the C program know that the access()
+ * system call is available to check for accessibility using real UID/GID.
+ * (always present on UNIX.)
+ */
+#$d_access HAS_ACCESS /**/
+
+/* HAS_CSH:
+ * This symbol, if defined, indicates that the C-shell exists.
+ */
/* CSH:
* This symbol, if defined, contains the full pathname of csh.
*/
#define CSH "$full_csh" /**/
#endif
+/* HAS_ENDGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the group database.
+ */
+#$d_endgrent HAS_ENDGRENT /**/
+
/* HAS_ENDHOSTENT:
* This symbol, if defined, indicates that the endhostent() routine is
* available to close whatever was being used for host queries.
*/
#$d_endpent HAS_ENDPROTOENT /**/
+/* HAS_ENDPWENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the passwd database.
+ */
+#$d_endpwent HAS_ENDPWENT /**/
+
/* HAS_ENDSERVENT:
* This symbol, if defined, indicates that the endservent() routine is
* available to close whatever was being used for service queries.
*/
#$d_endsent HAS_ENDSERVENT /**/
+/* HAS_GETGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for sequential access of the group database.
+ */
+#$d_getgrent HAS_GETGRENT /**/
+
/* HAS_GETHOSTBYADDR:
* This symbol, if defined, indicates that the gethostbyaddr() routine is
* available to look up hosts by their IP addresses.
*/
#$d_gethent HAS_GETHOSTENT /**/
+/* HAS_GETHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * gethostname() routine to derive the host name. See also HAS_UNAME
+ * and PHOSTNAME.
+ */
+/* HAS_UNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * uname() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and PHOSTNAME.
+ */
+/* PHOSTNAME:
+ * This symbol, if defined, indicates the command to feed to the
+ * popen() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and HAS_UNAME. Note that the command uses a fully qualified path,
+ * so that it is safe even if used by a process with super-user
+ * privileges.
+ */
+#$d_gethname HAS_GETHOSTNAME /**/
+#$d_uname HAS_UNAME /**/
+#$d_phostname HAS_PHOSTNAME
+#ifdef HAS_PHOSTNAME
+#define PHOSTNAME "$aphostname" /* How to get the host name */
+#endif
+
/* HAS_GETNETBYADDR:
* This symbol, if defined, indicates that the getnetbyaddr() routine is
* available to look up networks by their IP addresses.
#$d_getpbyname HAS_GETPROTOBYNAME /**/
#$d_getpbynumber HAS_GETPROTOBYNUMBER /**/
+/* HAS_GETPWENT:
+ * This symbol, if defined, indicates that the getpwent routine is
+ * available for sequential access of the passwd database.
+ * If this is not available, the older getpw() function may be available.
+ */
+#$d_getpwent HAS_GETPWENT /**/
+
/* HAS_GETSERVENT:
* This symbol, if defined, indicates that the getservent() routine is
* available to look up network services in some data base or another.
#$d_getsbyname HAS_GETSERVBYNAME /**/
#$d_getsbyport HAS_GETSERVBYPORT /**/
-/* HAS_LONG_DOUBLE:
- * This symbol will be defined if the C compiler supports long
- * doubles.
- */
+/* HAS_HTONL:
+ * This symbol, if defined, indicates that the htonl() routine (and
+ * friends htons() ntohl() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_HTONS:
+ * This symbol, if defined, indicates that the htons() routine (and
+ * friends htonl() ntohl() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_NTOHL:
+ * This symbol, if defined, indicates that the ntohl() routine (and
+ * friends htonl() htons() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_NTOHS:
+ * This symbol, if defined, indicates that the ntohs() routine (and
+ * friends htonl() htons() ntohl()) are available to do network
+ * order byte swapping.
+ */
+#$d_htonl HAS_HTONL /**/
+#$d_htonl HAS_HTONS /**/
+#$d_htonl HAS_NTOHL /**/
+#$d_htonl HAS_NTOHS /**/
+
+/* HAS_LONG_DOUBLE:
+ * This symbol will be defined if the C compiler supports long
+ * doubles.
+ */
/* LONG_DOUBLESIZE:
* This symbol contains the size of a long double, so that the
* C preprocessor can make decisions based on it. It is only
#endif
/* HAS_LONG_LONG:
- * This symbol will be defined if the C compiler supports
- * long long.
+ * This symbol will be defined if the C compiler supports long long.
*/
/* LONGLONGSIZE:
* This symbol contains the size of a long long, so that the
#define LONGLONGSIZE $longlongsize /**/
#endif
+/* HAS_MEMCHR:
+ * This symbol, if defined, indicates that the memchr routine is available
+ * to locate characters within a C string.
+ */
+#$d_memchr HAS_MEMCHR /**/
+
+/* HAS_MMAP:
+ * This symbol, if defined, indicates that the mmap system call is
+ * available to map a file into memory.
+ */
+/* Mmap_t:
+ * This symbol holds the return type of the mmap() system call
+ * (and simultaneously the type of the first argument).
+ * Usually set to 'void *' or 'cadd_t'.
+ */
+#$d_mmap HAS_MMAP /**/
+#define Mmap_t $mmaptype /**/
+
+/* HAS_MSG:
+ * This symbol, if defined, indicates that the entire msg*(2) library is
+ * supported (IPC mechanism based on message queues).
+ */
+#$d_msg HAS_MSG /**/
+
+/* HAS_SEM:
+ * This symbol, if defined, indicates that the entire sem*(2) library is
+ * supported.
+ */
+#$d_sem HAS_SEM /**/
+
+/* HAS_SETGRENT:
+ * This symbol, if defined, indicates that the setgrent routine is
+ * available for initializing sequential access of the group database.
+ */
+#$d_setgrent HAS_SETGRENT /**/
+
/* HAS_SETGROUPS:
* This symbol, if defined, indicates that the setgroups() routine is
* available to set the list of process groups. If unavailable, multiple
*/
#$d_setpent HAS_SETPROTOENT /**/
+/* HAS_SETPWENT:
+ * This symbol, if defined, indicates that the setpwent routine is
+ * available for initializing sequential access of the passwd database.
+ */
+#$d_setpwent HAS_SETPWENT /**/
+
/* HAS_SETSERVENT:
* This symbol, if defined, indicates that the setservent() routine is
* available.
*/
#$d_setvbuf HAS_SETVBUF /**/
+/* HAS_SHM:
+ * This symbol, if defined, indicates that the entire shm*(2) library is
+ * supported.
+ */
+#$d_shm HAS_SHM /**/
+
/* HAS_SOCKET:
* This symbol, if defined, indicates that the BSD socket interface is
* supported.
* This symbol, if defined, indicates that the BSD socketpair() call is
* supported.
*/
-#$d_socket HAS_SOCKET /**/
-#$d_sockpair HAS_SOCKETPAIR /**/
+/* HAS_MSG_CTRUNC:
+ * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_DONTROUTE:
+ * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_OOB:
+ * This symbol, if defined, indicates that the MSG_OOB is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_PEEK:
+ * This symbol, if defined, indicates that the MSG_PEEK is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_PROXY:
+ * This symbol, if defined, indicates that the MSG_PROXY is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_SCM_RIGHTS:
+ * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_SENDMSG:
+ * This symbol, if defined, indicates that the sendmsg is supported
+ * to send messages between sockets. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+/* HAS_RECVMSG:
+ * This symbol, if defined, indicates that the recvmsg is supported
+ * to send messages between sockets. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+/* HAS_STRUCT_MSGHDR:
+ * This symbol, if defined, indicates that the struct msghdr
+ * (BSD 4.3 or 4.4) is supported. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+/* HAS_STRUCT_CMSGHDR:
+ * This symbol, if defined, indicates that the struct cmsghdr
+ * (BSD 4.4) is supported. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+#$d_socket HAS_SOCKET /**/
+#$d_sockpair HAS_SOCKETPAIR /**/
+#$d_msg_ctrunc HAS_MSG_CTRUNC /**/
+#$d_msg_dontroute HAS_MSG_DONTROUTE /**/
+#$d_msg_oob HAS_MSG_OOB /**/
+#$d_msg_peek HAS_MSG_PEEK /**/
+#$d_msg_proxy HAS_MSG_PROXY /**/
+#$d_scm_rights HAS_SCM_RIGHTS /**/
+#$d_sendmsg HAS_SENDMSG /**/
+#$d_recvmsg HAS_RECVMSG /**/
+#$d_msghdr_s HAS_STRUCT_MSGHDR /**/
+#$d_cmsghdr_s HAS_STRUCT_CMSGHDR /**/
+
+/* USE_STAT_BLOCKS:
+ * This symbol is defined if this system has a stat structure declaring
+ * st_blksize and st_blocks.
+ */
+#$d_statblks USE_STAT_BLOCKS /**/
+
+/* HAS_STRERROR:
+ * This symbol, if defined, indicates that the strerror routine is
+ * available to translate error numbers to strings. See the writeup
+ * of Strerror() in this file before you try to define your own.
+ */
+/* HAS_SYS_ERRLIST:
+ * This symbol, if defined, indicates that the sys_errlist array is
+ * available to translate error numbers to strings. The extern int
+ * sys_nerr gives the size of that table.
+ */
+/* Strerror:
+ * This preprocessor symbol is defined as a macro if strerror() is
+ * not available to translate error numbers to strings but sys_errlist[]
+ * array is there.
+ */
+#$d_strerror HAS_STRERROR /**/
+#$d_syserrlst HAS_SYS_ERRLIST /**/
+#define Strerror(e) $d_strerrm
/* HAS_UNION_SEMUN:
* This symbol, if defined, indicates that the union semun is
#$d_semctl_semun USE_SEMCTL_SEMUN /**/
#$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/
+/* HAS_VFORK:
+ * This symbol, if defined, indicates that vfork() exists.
+ */
+#$d_vfork HAS_VFORK /**/
+
/* Signal_t:
* This symbol's value is either "void" or "int", corresponding to the
* appropriate return type of a signal handler. Thus, you can declare
#define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */
#endif
+/* I_GRP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <grp.h>.
+ */
+/* GRPASSWD:
+ * This symbol, if defined, indicates to the C program that struct group
+ * in <grp.h> contains gr_passwd.
+ */
+#$i_grp I_GRP /**/
+#$d_grpasswd GRPASSWD /**/
+
/* I_NETDB:
* This symbol, if defined, indicates that <netdb.h> exists and
* should be included.
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_gecos.
*/
+/* PWPASSWD:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_passwd.
+ */
#$i_pwd I_PWD /**/
#$d_pwquota PWQUOTA /**/
#$d_pwage PWAGE /**/
#$d_pwexpire PWEXPIRE /**/
#$d_pwcomment PWCOMMENT /**/
#$d_pwgecos PWGECOS /**/
+#$d_pwpasswd PWPASSWD /**/
-/* PRIVLIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
+/* I_SYSUIO:
+ * This symbol, if defined, indicates that <sys/uio.h> exists and
+ * should be included.
*/
-/* PRIVLIB_EXP:
- * This symbol contains the ~name expanded version of PRIVLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+#$i_sysuio I_SYSUIO /**/
+
+/* Free_t:
+ * This variable contains the return type of free(). It is usually
+ * void, but occasionally int.
*/
-#define PRIVLIB "$privlib" /**/
-#define PRIVLIB_EXP "$privlibexp" /**/
+/* Malloc_t:
+ * This symbol is the type of pointer returned by malloc and realloc.
+ */
+#define Malloc_t $malloctype /**/
+#define Free_t $freetype /**/
+
+/* MYMALLOC:
+ * This symbol, if defined, indicates that we're using our own malloc.
+ */
+#$d_mymalloc MYMALLOC /**/
/* SIG_NAME:
* This symbol contains a list of signal names in order of
* the sig_name list.
*/
#define SIG_NAME $sig_name_init /**/
-#define SIG_NUM $sig_num /**/
+#define SIG_NUM $sig_num_init /**/
-/* SITEARCH:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * Individual sites may place their own extensions and modules in
- * this directory.
- */
-/* SITEARCH_EXP:
- * This symbol contains the ~name expanded version of SITEARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* VOIDFLAGS:
+ * This symbol indicates how much support of the void type is given by this
+ * compiler. What various bits mean:
+ *
+ * 1 = supports declaration of void
+ * 2 = supports arrays of pointers to functions returning void
+ * 4 = supports comparisons between pointers to void functions and
+ * addresses of void functions
+ * 8 = suports declaration of generic void pointers
+ *
+ * The package designer should define VOIDUSED to indicate the requirements
+ * of the package. This can be done either by #defining VOIDUSED before
+ * including config.h, or by defining defvoidused in Myinit.U. If the
+ * latter approach is taken, only those flags will be tested. If the
+ * level of void support necessary is not present, defines void to int.
*/
-#define SITEARCH "$sitearch" /**/
-#define SITEARCH_EXP "$sitearchexp" /**/
+#ifndef VOIDUSED
+#define VOIDUSED $defvoidused
+#endif
+#define VOIDFLAGS $voidflags
+#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
+#define void int /* is void to be avoided? */
+#define M_VOID /* Xenix strikes again */
+#endif
-/* SITELIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * Individual sites may place their own extensions and modules in
- * this directory.
+/* ARCHLIB:
+ * This variable, if defined, holds the name of the directory in
+ * which the user wants to put architecture-dependent public
+ * library files for $package. It is most often a local directory
+ * such as /usr/local/lib. Programs using this variable must be
+ * prepared to deal with filename expansion. If ARCHLIB is the
+ * same as PRIVLIB, it is not defined, since presumably the
+ * program already searches PRIVLIB.
*/
-/* SITELIB_EXP:
- * This symbol contains the ~name expanded version of SITELIB, to be used
+/* ARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of ARCHLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define SITELIB "$sitelib" /**/
-#define SITELIB_EXP "$sitelibexp" /**/
+#$d_archlib ARCHLIB "$archlib" /**/
+#$d_archlib ARCHLIB_EXP "$archlibexp" /**/
/* DLSYM_NEEDS_UNDERSCORE:
* This symbol, if defined, indicates that we need to prepend an
*/
#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/
+/* HAS_ENDSPENT:
+ * This symbol, if defined, indicates that the endspent system call is
+ * available to finalize the scan of SysV shadow password entries.
+ */
+#$d_endspent HAS_ENDSPENT /**/
+
+/* HAS_FSEEKO:
+ * This symbol, if defined, indicates that the fseeko routine is
+ * available to fseek beyond 32 bits (useful for ILP32 hosts).
+ */
+#$d_fseeko HAS_FSEEKO /**/
+
+/* HAS_FTELLO:
+ * This symbol, if defined, indicates that the ftello routine is
+ * available to ftell from beyond 32 bits (useful for ILP32 hosts).
+ */
+#$d_ftello HAS_FTELLO /**/
+
+/* HAS_GETMNTENT:
+ * This symbol, if defined, indicates that the getmntent routine is
+ * available to iterate through mounted file systems.
+ */
+#$d_getmntent HAS_GETMNTENT /**/
+
+/* HAS_GETSPENT:
+ * This symbol, if defined, indicates that the getspent system call is
+ * available to retrieve SysV shadow password entries sequentially.
+ */
+#$d_getspent HAS_GETSPENT /**/
+
+/* HAS_GETSPNAM:
+ * This symbol, if defined, indicates that the getspnam system call is
+ * available to retrieve SysV shadow password entries by name.
+ */
+#$d_getspnam HAS_GETSPNAM /**/
+
+/* HAS_HASMNTOPT:
+ * This symbol, if defined, indicates that the hasmntopt routine is
+ * available to query the mount options of file systems.
+ */
+#$d_hasmntopt HAS_HASMNTOPT /**/
+
+/* HAS_MADVISE:
+ * This symbol, if defined, indicates that the madvise system call is
+ * available to map a file into memory.
+ */
+#$d_madvise HAS_MADVISE /**/
+
+/* HAS_MPROTECT:
+ * This symbol, if defined, indicates that the mprotect system call is
+ * available to modify the access protection of a memory mapped file.
+ */
+#$d_mprotect HAS_MPROTECT /**/
+
+/* HAS_READV:
+ * This symbol, if defined, indicates that the readv routine is
+ * available to do gather reads. You will also need <sys/uio.h>
+ * and there I_SYSUIO.
+ */
+#$d_readv HAS_READV /**/
+
+/* HAS_SETSPENT:
+ * This symbol, if defined, indicates that the setspent system call is
+ * available to initialize the scan of SysV shadow password entries.
+ */
+#$d_setspent HAS_SETSPENT /**/
+
/* USE_SFIO:
* This symbol, if defined, indicates that sfio should
* be used.
*/
#$d_sfio USE_SFIO /**/
+/* HAS_FSTATFS:
+ * This symbol, if defined, indicates that the fstatfs routine is
+ * available to stat filesystems of file descriptors.
+ */
+/* HAS_STRUCT_STATFS_FLAGS:
+ * This symbol, if defined, indicates that the struct statfs
+ * does have the f_flags member containing the mount flags of
+ * the filesystem holding the file.
+ * This kind of struct statfs is coming from sys/mount.h (BSD),
+ * not from sys/statfs.h (SYSV).
+ */
+#$d_fstatfs HAS_FSTATFS /**/
+#$d_statfsflags HAS_STRUCT_STATFS_FLAGS /**/
+
+/* HAS_FSTATVFS:
+ * This symbol, if defined, indicates that the fstatvfs routine is
+ * available to stat filesystems of file descriptors.
+ */
+#$d_fstatvfs HAS_FSTATVFS /**/
+
+/* HAS_TELLDIR_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the telldir() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern long telldir (DIR*);
+ */
+#$d_telldirproto HAS_TELLDIR_PROTO /**/
+
+/* HAS_WRITEV:
+ * This symbol, if defined, indicates that the writev routine is
+ * available to do scatter writes.
+ */
+#$d_writev HAS_WRITEV /**/
+
+/* HAS_DBMINIT64:
+ * This symbol, if defined, indicates that the dbminit64 routine is
+ * available to open dbm files larger than 2 gigabytes.
+ */
+/* HAS_DBMCLOSE64:
+ * This symbol, if defined, indicates that the dbmclose64 routine is
+ * available to close dbm files larger than 2 gigabytes.
+ */
+/* HAS_FETCH64:
+ * This symbol, if defined, indicates that the fetch64 routine is
+ * available to fetch from dbm files larger than 2 gigabytes.
+ */
+/* HAS_STORE64:
+ * This symbol, if defined, indicates that the store64 routine is
+ * available to store to dbm files larger than 2 gigabytes.
+ */
+/* HAS_DELETE64:
+ * This symbol, if defined, indicates that the delete64 routine is
+ * available to delete from dbm files larger than 2 gigabytes.
+ */
+/* HAS_FIRSTKEY64:
+ * This symbol, if defined, indicates that the firstkey64 routine is
+ * available to firstkey in dbm files larger than 2 gigabytes.
+ */
+/* HAS_NEXTKEY64:
+ * This symbol, if defined, indicates that the nextkey64 routine is
+ * available to nextkey in dbm files larger than 2 gigabytes.
+ */
+#$d_dbminit64 HAS_DBMINIT64 /**/
+#$d_dbmclose64 HAS_DBMCLOSE64 /**/
+#$d_fetch64 HAS_FETCH64 /**/
+#$d_store64 HAS_STORE64 /**/
+#$d_delete64 HAS_DELETE64 /**/
+#$d_firstkey64 HAS_FIRSTKEY64 /**/
+#$d_nextkey64 HAS_NEXTKEY64 /**/
+
/* USE_DYNAMIC_LOADING:
* This symbol, if defined, indicates that dynamic loading of
* some sort is available.
*/
#$usedl USE_DYNAMIC_LOADING /**/
+/* FFLUSH_NULL:
+ * This symbol, if defined, tells that fflush(NULL) does flush
+ * all pending stdio output.
+ */
+/* FFLUSH_ALL:
+ * This symbol, if defined, tells that to flush
+ * all pending stdio output one must loop through all
+ * the stdio file handles stored in an array and fflush them.
+ * Note that if fflushNULL is defined, fflushall will not
+ * even be probed for and will be left undefined.
+ */
+#$fflushNULL FFLUSH_NULL /**/
+#$fflushall FFLUSH_ALL /**/
+
/* DB_Prefix_t:
* This symbol contains the type of the prefix structure element
* in the <db.h> header file. In older versions of DB, it was
#define DB_Hash_t $db_hashtype /**/
#define DB_Prefix_t $db_prefixtype /**/
+/* I_INTTYPES:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <inttypes.h>.
+ */
+/* HAS_INT64_T:
+ * This symbol will defined if the C compiler supports int64_t.
+ * Usually the <inttypes.h> needs to be included, but sometimes
+ * <sys/types.h> is enough.
+ */
+#$i_inttypes I_INTTYPES /**/
+#$d_int64t HAS_INT64_T /**/
+
+/* I_MNTENT:
+ * This symbol, if defined, indicates that <mntent.h> exists and
+ * should be included.
+ */
+#$i_mntent I_MNTENT /**/
+
+/* I_NETINET_TCP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <netinet/tcp.h>.
+ */
+#$i_netinettcp I_NETINET_TCP /**/
+
+/* I_POLL:
+ * This symbol, if defined, indicates that <poll.h> exists and
+ * should be included.
+ */
+#$i_poll I_POLL /**/
+
+/* I_SHADOW:
+ * This symbol, if defined, indicates that <shadow.h> exists and
+ * should be included.
+ */
+#$i_shadow I_SHADOW /**/
+
+/* I_SYS_MMAN:
+ * This symbol, if defined, indicates that <sys/mman.h> exists and
+ * should be included.
+ */
+#$i_sysmman I_SYS_MMAN /**/
+
+/* I_SYS_MOUNT:
+ * This symbol, if defined, indicates that <sys/mount.h> exists and
+ * should be included.
+ */
+#$i_sysmount I_SYS_MOUNT /**/
+
+/* I_SYS_STATVFS:
+ * This symbol, if defined, indicates that <sys/statvfs.h> exists and
+ * should be included.
+ */
+#$i_sysstatvfs I_SYS_STATVFS /**/
+
+/* INSTALL_USR_BIN_PERL:
+ * This symbol, if defined, indicates that Perl is to be installed
+ * also as /usr/bin/perl.
+ */
+#$installusrbinperl INSTALL_USR_BIN_PERL /**/
+
+/* HAS_FSTAT64:
+ * This symbol, if defined, indicates that the fstat64 routine is
+ * available to stat files (fds) larger than 2 gigabytes.
+ */
+/* HAS_FTRUNCATE64:
+ * This symbol, if defined, indicates that the ftruncate64 routine is
+ * available to tell files larger than 2 gigabytes.
+ */
+/* HAS_LSEEK64:
+ * This symbol, if defined, indicates that the lseek64 routine is
+ * available to seek files larger than 2 gigabytes.
+ */
+/* HAS_LSTAT64:
+ * This symbol, if defined, indicates that the lstat64 routine is
+ * available to stat files (symlinks) larger than 2 gigabytes.
+ */
+/* HAS_OPEN64:
+ * This symbol, if defined, indicates that the open64 routine is
+ * available to open files larger than 2 gigabytes.
+ */
+/* HAS_OPENDIR64:
+ * This symbol, if defined, indicates that the opendir64 routine is
+ * available to opendir files larger than 2 gigabytes.
+ */
+/* HAS_READDIR64:
+ * This symbol, if defined, indicates that the readdir64 routine is
+ * available to readdir files larger than 2 gigabytes.
+ */
+/* HAS_SEEKDIR64:
+ * This symbol, if defined, indicates that the seekdir64 routine is
+ * available to seekdir files larger than 2 gigabytes.
+ */
+/* HAS_STAT64:
+ * This symbol, if defined, indicates that the stat64 routine is
+ * available to stat files larger than 2 gigabytes.
+ */
+/* HAS_TELLDIR64:
+ * This symbol, if defined, indicates that the telldir64 routine is
+ * available to telldir files larger than 2 gigabytes.
+ */
+/* HAS_TRUNCATE64:
+ * This symbol, if defined, indicates that the truncate64 routine is
+ * available to truncate files larger than 2 gigabytes.
+ */
+/* HAS_OFF64_T:
+ * This symbol will be defined if the C compiler supports off64_t.
+ */
+/* HAS_STRUCT_DIRENT64:
+ * This symbol will be defined if the C compiler supports struct dirent64.
+ */
+#$d_fstat64 HAS_FSTAT64 /**/
+#$d_ftruncate64 HAS_FTRUNCATE64 /**/
+#$d_lseek64 HAS_LSEEK64 /**/
+#$d_lstat64 HAS_LSTAT64 /**/
+#$d_open64 HAS_OPEN64 /**/
+#$d_opendir64 HAS_OPENDIR64 /**/
+#$d_readdir64 HAS_READDIR64 /**/
+#$d_seekdir64 HAS_SEEKDIR64 /**/
+#$d_stat64 HAS_STAT64 /**/
+#$d_telldir64 HAS_TELLDIR64 /**/
+#$d_truncate64 HAS_TRUNCATE64 /**/
+#$d_off64_t HAS_OFF64_T /**/
+#$d_dirent64_s HAS_STRUCT_DIRENT64 /**/
+
+/* PRIVLIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ */
+/* PRIVLIB_EXP:
+ * This symbol contains the ~name expanded version of PRIVLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define PRIVLIB "$privlib" /**/
+#define PRIVLIB_EXP "$privlibexp" /**/
+
+/* SELECT_MIN_BITS:
+ * This symbol holds the minimum number of bits operated by select.
+ * That is, if you do select(n, ...), how many bits at least will be
+ * cleared in the masks if some activity is detected. Usually this
+ * is either n or 32*ceil(n/32), especially many little-endians do
+ * the latter. This is only useful if you have select(), naturally.
+ */
+#define SELECT_MIN_BITS $selectminbits /**/
+
+/* SITEARCH:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * Individual sites may place their own extensions and modules in
+ * this directory.
+ */
+/* SITEARCH_EXP:
+ * This symbol contains the ~name expanded version of SITEARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITEARCH "$sitearch" /**/
+#define SITEARCH_EXP "$sitearchexp" /**/
+
+/* SITELIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * Individual sites may place their own extensions and modules in
+ * this directory.
+ */
+/* SITELIB_EXP:
+ * This symbol contains the ~name expanded version of SITELIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITELIB "$sitelib" /**/
+#define SITELIB_EXP "$sitelibexp" /**/
+
/* STARTPERL:
* This variable contains the string to put in front of a perl
* script to make sure (one hopes) that it runs with perl and not
*/
#define STARTPERL "$startperl" /**/
+/* HAS_FGETPOS64:
+ * This symbol, if defined, indicates that the fgetpos64 routine is
+ * available to getpos files larger than 2 gigabytes.
+ */
+/* HAS_FOPEN64:
+ * This symbol, if defined, indicates that the fopen64 routine is
+ * available to open files larger than 2 gigabytes.
+ */
+/* HAS_FREOPEN64:
+ * This symbol, if defined, indicates that the freopen64 routine is
+ * available to reopen files larger than 2 gigabytes.
+ */
+/* HAS_FSEEK64:
+ * This symbol, if defined, indicates that the fseek64 routine is
+ * available to seek files larger than 2 gigabytes.
+ */
+/* HAS_FSEEKO64:
+ * This symbol, if defined, indicates that the fseeko64 routine is
+ * available to seek files larger than 2 gigabytes.
+ */
+/* HAS_FSETPOS64:
+ * This symbol, if defined, indicates that the fsetpos64 routine is
+ * available to setpos files larger than 2 gigabytes.
+ */
+/* HAS_FTELL64:
+ * This symbol, if defined, indicates that the ftell64 routine is
+ * available to tell files larger than 2 gigabytes.
+ */
+/* HAS_FTELLO64:
+ * This symbol, if defined, indicates that the ftello64 routine is
+ * available to tell files larger than 2 gigabytes.
+ */
+/* HAS_TMPFILE64:
+ * This symbol, if defined, indicates that the tmpfile64 routine is
+ * available to tmpfile files larger than 2 gigabytes.
+ */
+#$d_fgetpos64 HAS_FGETPOS64 /**/
+#$d_fopen64 HAS_FOPEN64 /**/
+#$d_freopen64 HAS_FREOPEN64 /**/
+#$d_fseek64 HAS_FSEEK64 /**/
+#$d_fseeko64 HAS_FSEEKO64 /**/
+#$d_fsetpos64 HAS_FSETPOS64 /**/
+#$d_ftell64 HAS_FTELL64 /**/
+#$d_ftello64 HAS_FTELLO64 /**/
+#$d_tmpfile64 HAS_TMPFILE64 /**/
+
+/* HAS_STDIO_STREAM_ARRAY:
+ * This symbol, if defined, tells that there is an array
+ * holding the stdio streams.
+ */
+/* STDIO_STREAM_ARRAY:
+ * This symbol tells the name of the array holding the stdio streams.
+ * Usual values include _iob, __iob, and __sF.
+ */
+#$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY /**/
+#define STDIO_STREAM_ARRAY $stdio_stream_array
+
+/* USE_64_BITS:
+ * This symbol, if defined, indicates that 64-bit interfaces should
+ * be used when available. If not defined, the native default interfaces
+ * will be used (be they 32 or 64 bits).
+ */
+#$use64bits USE_64_BITS /**/
+
+/* MULTIPLICITY:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use multiplicity.
+ */
+#$usemultiplicity MULTIPLICITY /**/
+
/* USE_PERLIO:
* This symbol, if defined, indicates that the PerlIO abstraction should
* be used throughout. If not defined, stdio should be
*/
#$useperlio USE_PERLIO /**/
+/* HAS_DRAND48_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the drand48() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern double drand48 (void);
+ */
+#$d_drand48proto HAS_DRAND48_PROTO /**/
+
/* HAS_GETHOST_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* prototypes for gethostent(), gethostbyname(), and
*/
#define ARCHNAME "$archname" /**/
+/* OLD_PTHREAD_CREATE_JOINABLE:
+ * This symbol, if defined, indicates how to create pthread
+ * in joinable (aka undetached) state. NOTE: not defined
+ * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ * (the new version of the constant).
+ * If defined, known values are PTHREAD_CREATE_UNDETACHED
+ * and __UNDETACHED.
+ */
+#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/
+
/* HAS_PTHREAD_YIELD:
* This symbol, if defined, indicates that the pthread_yield
* routine is available to yield the execution of the current
- * thread.
+ * thread. sched_yield is preferable to pthread_yield.
+ */
+/* SCHED_YIELD:
+ * This symbol defines the way to yield the execution of
+ * the current thread. Known ways are sched_yield,
+ * pthread_yield, and pthread_yield with NULL.
*/
/* HAS_SCHED_YIELD:
* This symbol, if defined, indicates that the sched_yield
* routine is available to yield the execution of the current
- * thread.
+ * thread. sched_yield is preferable to pthread_yield.
*/
#$d_pthread_yield HAS_PTHREAD_YIELD /**/
+#define SCHED_YIELD $sched_yield /**/
#$d_sched_yield HAS_SCHED_YIELD /**/
-/* PTHREADS_CREATED_JOINABLE:
- * This symbol, if defined, indicates that pthreads are created
- * in the joinable (aka undetached) state.
+/* I_MACH_CTHREADS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <mach/cthreads.h>.
*/
-#$d_pthreads_created_joinable PTHREADS_CREATED_JOINABLE /**/
+#$i_machcthr I_MACH_CTHREADS /**/
/* USE_THREADS:
* This symbol, if defined, indicates that Perl should
*/
#define Gid_t $gidtype /* Type for getgid(), etc... */
-/* Dev_t:
- * This symbol holds the type used to declare device numbers.
- * It can be int, long, dev_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Dev_t $devtype /* <device> type */
-
/* Off_t:
* This symbol holds the type used to declare offsets in the kernel.
* It can be int, long, off_t, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
+/* LSEEKSIZE:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
#define Off_t $lseektype /* <offset> type */
+#define LSEEKSIZE $lseeksize /* <offset> size */
/* Mode_t:
* This symbol holds the type used to declare file modes
https://perl5.git.perl.org / perl5.git / blobdiff