$ENV{PERL_CORE} = 1;
# Cheesy version of Getopt::Std. Maybe we should replace it with that.
+@argv = ();
if ($#ARGV >= 0) {
foreach my $idx (0..$#ARGV) {
- next unless $ARGV[$idx] =~ /^-(\S+)$/;
+ push( @argv, $ARGV[$idx] ), next unless $ARGV[$idx] =~ /^-(\S+)$/;
$core = 1 if $1 eq 'core';
$verbose = 1 if $1 eq 'v';
$with_utf= 1 if $1 eq 'utf8';
+ $byte_compile = 1 if $1 eq 'bytecompile';
+ $compile = 1 if $1 eq 'compile';
if ($1 =~ /^deparse(,.+)?$/) {
$deparse = 1;
$deparse_opts = $1;
}
- splice(@ARGV, $idx, 1);
}
}
+@ARGV = @argv;
chdir 't' if -f 't/TEST';
die "You need to run \"make test\" first to set things up.\n"
- unless -e 'perl' or -e 'perl.exe';
+ unless -e 'perl' or -e 'perl.exe' or -e 'perl.pm';
if ($ENV{PERL_3LOG}) { # Tru64 third(1) tool, see perlhack
unless (-x 'perl.third') {
}
unless (@ARGV) {
- foreach my $dir (qw(base comp cmd run io op)) {
+ foreach my $dir (qw(base comp cmd run io op uni)) {
_find_tests($dir);
}
_find_tests("lib") unless $core;
%infinite = ();
if ($deparse) {
- _testprogs('deparse', @ARGV);
-} else {
- _testprogs('perl', @ARGV);
- _testprogs('compile', @ARGV) if (-e "../testcompile");
+ _testprogs('deparse', '', @ARGV);
+}
+elsif( $compile || $byte_compile ) {
+ _testprogs('compile', '', @ARGV) if $compile;
+ _testprogs('compile', '-B', @ARGV) if $byte_compile;
+}
+else {
+ _testprogs('compile', '', @ARGV) if -e "../testcompile";
+ _testprogs('perl', '', @ARGV);
}
sub _testprogs {
$type = shift @_;
+ $args = shift;
@tests = @_;
print <<'EOT' if ($type eq 'compile');
$test = $OVER{$test} if exists $OVER{$test};
- open(SCRIPT,"<$test") or die "Can't run $test.\n";
- $_ = <SCRIPT>;
- close(SCRIPT) unless ($type eq 'deparse');
- if (/#!.*perl(.*)$/) {
- $switch = $1;
- if ($^O eq 'VMS') {
- # Must protect uppercase switches with "" on command line
- $switch =~ s/-([A-Z]\S*)/"-$1"/g;
- }
- }
- else {
- $switch = '';
- }
+ open(SCRIPT,"<$test") or die "Can't run $test.\n";
+ $_ = <SCRIPT>;
+ close(SCRIPT) unless ($type eq 'deparse');
+ if (/#!.*\bperl.*-\w*([tT])/) {
+ $switch = qq{"-$1"};
+ }
+ else {
+ $switch = '';
+ }
+ my $test_executable; # for 'compile' tests
my $file_opts = "";
if ($type eq 'deparse') {
# Look for #line directives which change the filename
open(RESULTS,$run) or print "can't run '$run': $!.\n";
}
else {
- my $compile =
- "./perl $testswitch -I../lib ../utils/perlcc -o ".
- "$test.plc $utf $test ".
- " && $test.plc |";
+ my $compile;
+ my $pl2c = "$testswitch -I../lib ../utils/perlcc --testsuite " .
+ # -O9 for good measure, -fcog is broken ATM
+ "$switch -Wb=-O9,-fno-cog -L .. " .
+ "-I \".. ../lib/CORE\" $args $utf $test -o ";
+
+ if( $^O eq 'MSWin32' ) {
+ $test_executable = "$test.exe";
+ # hopefully unused name...
+ open HACK, "> xweghyz.pl";
+ print HACK <<EOT;
+#!./perl
+
+open HACK, '.\\perl $pl2c $test_executable |';
+# cl.exe prints the name of the .c file on stdout (\%^\$^#)
+while(<HACK>) {m/^\w+\.[cC]\$/ && next;print}
+open HACK, '$test_executable |';
+while(<HACK>) {print}
+EOT
+ close HACK;
+ $compile = 'xweghyz.pl |';
+ }
+ else {
+ $test_executable = "$test.plc";
+ $compile = "./perl $pl2c $test_executable && $test_executable |";
+ }
+ unlink $test_executable if -f $test_executable;
open(RESULTS, $compile)
or print "can't compile '$compile': $!.\n";
- unlink "$test.plc";
}
- $ok = 0;
- $next = 0;
+ $ok = 0;
+ $next = 0;
while (<RESULTS>) {
if ($verbose) {
print $_;
die "rename: perl3.log to perl.3log.$tpp: $!\n";
}
$next = $next - 1;
- if ($ok && $next == $max) {
+ # test if the compiler compiled something
+ if( $type eq 'compile' && !-e "$test_executable" ) {
+ $ok = 0;
+ print "Test did not compile\n";
+ }
+ if ($ok && $next == $max ) {
if ($max) {
print "ok\n";
$good = $good + 1;
else {
warn "Failed $bad test scripts out of $files, $pct% okay.\n";
}
- warn <<'SHRDLU';
+ warn <<'SHRDLU_1';
### Since not all tests were successful, you may want to run some of
### them individually and examine any diagnostic messages they produce.
### See the INSTALL document's section on "make test".
-SHRDLU
- warn <<'SHRDLU' if $good / $total > 0.8;
+SHRDLU_1
+ warn <<'SHRDLU_2' if $good / $total > 0.8;
### You have a good chance to get more information by running
### ./perl harness
### in the 't' directory since most (>=80%) of the tests succeeded.
-SHRDLU
- use Config;
- if ($Config{ldlibpthname}) {
- warn <<SHRDLU;
+SHRDLU_2
+ if (eval {require Config; import Config; 1}) {
+ if ($Config{usedl} && (my $p = $Config{ldlibpthname})) {
+ warn <<SHRDLU_3;
### You may have to set your dynamic library search path,
- ### $Config{ldlibpthname}, to point to the build directory
- ### before running the harness-- depending on your shell style:
- ### setenv $Config{ldlibpthname} `pwd`:\$$Config{ldlibpthname}; cd t; ./perl harness
- ### $Config{ldlibpthname}=`pwd`:\$$Config{ldlibpthname}; export $Config{ldlibpthname}; cd t; ./perl harness
- ### export $Config{ldlibpthname}=`pwd`:\$$Config{ldlibpthname}; cd t; ./perl harness
+ ### $p, to point to the build directory:
+SHRDLU_3
+ if (exists $ENV{$p} && $ENV{$p} ne '') {
+ warn <<SHRDLU_4a;
+ ### setenv $p `pwd`:\$$p; cd t; ./perl harness
+ ### $p=`pwd`:\$$p; export $p; cd t; ./perl harness
+ ### export $p=`pwd`:\$$p; cd t; ./perl harness
+SHRDLU_4a
+ } else {
+ warn <<SHRDLU_4b;
+ ### setenv $p `pwd`; cd t; ./perl harness
+ ### $p=`pwd`; export $p; cd t; ./perl harness
+ ### export $p=`pwd`; cd t; ./perl harness
+SHRDLU_4b
+ }
+ warn <<SHRDLU_5;
### for csh-style shells, like tcsh; or for traditional/modern
### Bourne-style shells, like bash, ksh, and zsh, respectively.
-SHRDLU
+SHRDLU_5
+ }
}
}
($user,$sys,$cuser,$csys) = times;
https://perl5.git.perl.org / perl5.git / blobdiff