use warnings;
sub DEBUG () { 0 }
+$|=1 if DEBUG;
sub DESTROY {}
sub croak { require Carp; Carp::croak(@_) }
+sub _loose_name ($) {
+ # Given a lowercase property or property-value name, return its
+ # standardized version that is expected for look-up in the 'loose' hashes
+ # in Heavy.pl (hence, this depends on what mktables does). This squeezes
+ # out blanks, underscores and dashes. The complication stems from the
+ # grandfathered-in 'L_', which retains a single trailing underscore.
+
+ my $loose = $_[0] =~ s/[-\s_]//rg;
+
+ return $loose if $loose !~ / ^ (?: is | to )? l $/x;
+ return 'l_' if $_[0] =~ / l .* _ /x; # If original had a trailing '_'
+ return $loose;
+}
+
##
## "SWASH" == "SWATCH HASH". A "swatch" is a swatch of the Unicode landscape.
## It's a data structure that encodes a set of Unicode characters.
sub SWASHNEW {
my ($class, $type, $list, $minbits, $none) = @_;
+ my $user_defined = 0;
local $^D = 0 if $^D;
$class = "" unless defined $class;
## regexec.c:regclass_swash -- for /[]/, \p, and \P
## utf8.c:is_utf8_common -- for common Unicode properties
## utf8.c:to_utf8_case -- for lc, uc, ucfirst, etc. and //i
+ ## Unicode::UCD::prop_invlist
+ ## Unicode::UCD::prop_invmap
##
## Given a $type, our goal is to fill $list with the set of codepoint
## ranges. If $type is false, $list passed is used.
# Upon success, a new (or cached) blessed object is returned with
# keys TYPE, BITS, EXTRAS, LIST, and NONE with values having the
# same meanings as the input parameters.
- # And if there is a special-treatment hash in the file, a reference
- # to it is returned in the entry with key SPECIALS
+ # SPECIALS contains a reference to any special-treatment hash in the
+ # INVERT_IT is non-zero if the result should be inverted before use
+ # USER_DEFINED is non-zero if the result came from a user-defined
+ # property.
my $file; ## file to load data from, and also part of the %Cache key.
- my $ListSorted = 0;
# Change this to get a different set of Unicode tables
my $unicore_dir = 'unicore';
+ my $invert_it = 0;
+ my $list_is_from_mktables = 0; # Is $list returned from a mktables
+ # generated file? If so, we know it's
+ # well behaved.
if ($type)
{
-
# Verify that this isn't a recursive call for this property.
- # Can't use croak, as it may try to recurse here itself.
+ # Can't use croak, as it may try to recurse to here itself.
my $class_type = $class . "::$type";
if (grep { $_ eq $class_type } @recursed) {
CORE::die "panic: Infinite recursion in SWASHNEW for '$type'\n";
# regcomp.c surrounds the property name with '__" and '_i' if this
# is to be caseless matching.
- my $caseless = $type =~ s/^__(.*)_i$/$1/;
+ my $caseless = $type =~ s/^(.*)__(.*)_i$/$1$2/;
print STDERR __LINE__, ": type=$type, caseless=$caseless\n" if DEBUG;
## package if no package given
##
- my $caller1 = $type =~ s/(.+)::// ? $1 : caller(1);
+
+ my $caller0 = caller(0);
+ my $caller1 = $type =~ s/(.+)::// ? $1 : $caller0 eq 'main' ?
+ 'main' : caller(1);
if (defined $caller1 && $type =~ /^I[ns]\w+$/) {
my $prop = "${caller1}::$type";
if $tainted;
no strict 'refs';
$list = &{$prop}($caseless);
+ $user_defined = 1;
last GETFILE;
}
}
print STDERR __LINE__, ": $property\n" if DEBUG;
# Here it is the compound property=table form. The property
- # name is always loosely matched, which means remove any of
- # these:
- $property =~ s/[_\s-]//g;
+ # name is always loosely matched, and always can have an
+ # optional 'is' prefix (which isn't true in the single
+ # form).
+ $property = _loose_name($property) =~ s/^is//r;
# And convert to canonical form. Quit if not valid.
$property = $utf8::loose_property_name_of{$property};
# out the applicable characters on the rhs and looking up
# again.
if (! defined $file) {
- $table =~ s/ [_\s-] //xg;
+ $table = _loose_name($table);
$property_and_table = "$prefix$table";
print STDERR __LINE__, ": $property_and_table\n" if DEBUG;
$file = $utf8::loose_to_file_of{$property_and_table};
# Add the constant and go fetch it in.
if (defined $file) {
+
+ # A beginning ! means to invert. The 0+ makes sure is
+ # numeric
+ $invert_it = 0 + $file =~ s/^!//;
+
if ($utf8::why_deprecated{$file}) {
warnings::warnif('deprecated', "Use of '$type' in \\p{} or \\P{} is deprecated because: $utf8::why_deprecated{$file};");
}
print STDERR __LINE__, ": didn't find $property_and_table\n" if DEBUG;
##
- ## See if it's a user-level "To".
- ##
-
- my $caller0 = caller(0);
-
- if (defined $caller0 && $type =~ /^To(?:\w+)$/) {
- my $map = $caller0 . "::" . $type;
-
- if (exists &{$map}) {
- no strict 'refs';
-
- $list = &{$map};
- warnings::warnif('deprecated', "User-defined case-mapping '$type' is deprecated");
- last GETFILE;
- }
- }
-
- ##
## Last attempt -- see if it's a standard "To" name
## (e.g. "ToLower") ToTitle is used by ucfirst().
## The user-level way to access ToDigit() and ToFold()
## is to use Unicode::UCD.
##
- if ($type =~ /^To(Digit|Fold|Lower|Title|Upper)$/) {
- $file = "$unicore_dir/To/$1.pl";
- ## would like to test to see if $file actually exists....
- last GETFILE;
- }
+ # Only check if caller wants non-binary
+ my $retried = 0;
+ if ($minbits != 1 && $property_and_table =~ s/^to//) {{
+ # Look input up in list of properties for which we have
+ # mapping files.
+ if (defined ($file =
+ $utf8::loose_property_to_file_of{$property_and_table}))
+ {
+ $type = $utf8::file_to_swash_name{$file};
+ print STDERR __LINE__, ": type set to $type\n" if DEBUG;
+ $file = "$unicore_dir/$file.pl";
+ last GETFILE;
+ } # If that fails see if there is a corresponding binary
+ # property file
+ elsif (defined ($file =
+ $utf8::loose_to_file_of{$property_and_table}))
+ {
+
+ # Here, there is no map file for the property we are
+ # trying to get the map of, but this is a binary
+ # property, and there is a file for it that can easily
+ # be translated to a mapping.
+
+ # In the case of properties that are forced to binary,
+ # they are a combination. We return the actual
+ # mapping instead of the binary. If the input is
+ # something like 'Tocjkkiicore', it will be found in
+ # %loose_property_to_file_of above as => 'To/kIICore'.
+ # But the form like ToIskiicore won't be. To fix
+ # this, it was easiest to do it here. These
+ # properties are the complements of the default
+ # property, so there is an entry in %loose_to_file_of
+ # that is 'iskiicore' => '!kIICore/N', If we find such
+ # an entry, strip off things and try again, which
+ # should find the entry in %loose_property_to_file_of.
+ # Actual binary properties that are of this form, such
+ # as this entry: 'ishrkt' => '!Perl/Any' will also be
+ # retried, but won't be in %loose_property_to_file_of,
+ # and instead the next time through, it will find
+ # 'hrkt' => '!Perl/Any' and proceed.
+ redo if ! $retried
+ && $file =~ /^!/
+ && $property_and_table =~ s/^is//;
+
+ # This is a binary property. Setting this here causes
+ # it to be stored as such in the cache, so if someone
+ # comes along later looking for just a binary, they
+ # get it.
+ $minbits = 1;
+
+ # The 0+ makes sure is numeric
+ $invert_it = 0 + $file =~ s/^!//;
+ $file = "$unicore_dir/lib/$file.pl";
+ last GETFILE;
+ }
+ } }
##
## If we reach this line, it's because we couldn't figure
pop @recursed if @recursed;
return $type;
- }
+ } # end of GETFILE block
if (defined $file) {
print STDERR __LINE__, ": found it (file='$file')\n" if DEBUG;
## (exception: user-defined properties and mappings), so we
## have a filename, so now we load it if we haven't already.
## If we have, return the cached results. The cache key is the
- ## class and file to load.
+ ## class and file to load, and whether the results need to be
+ ## inverted.
##
- my $found = $Cache{$class, $file};
+ my $found = $Cache{$class, $file, $invert_it};
if ($found and ref($found) eq $class) {
- print STDERR __LINE__, ": Returning cached '$file' for \\p{$type}\n" if DEBUG;
+ print STDERR __LINE__, ": Returning cached swash for '$class,$file,$invert_it' for \\p{$type}\n" if DEBUG;
pop @recursed if @recursed;
return $found;
}
local $@;
local $!;
$list = do $file; die $@ if $@;
+ $list_is_from_mktables = 1;
}
+ } # End of $type is non-null
- $ListSorted = 1; ## we know that these lists are sorted
- }
+ # Here, either $type was null, or we found the requested property and
+ # read it into $list
+
+ my $extras = "";
- my $extras;
my $bits = $minbits;
- if ($list) {
+ # mktables lists don't have extras, like '&utf8::prop', so don't need
+ # to separate them; also lists are already sorted, so don't need to do
+ # that.
+ if ($list && ! $list_is_from_mktables) {
my $taint = substr($list,0,0); # maintain taint
- my @tmp = split(/^/m, $list);
- my %seen;
- no warnings;
- $extras = join '', $taint, grep /^[^0-9a-fA-F]/, @tmp;
- $list = join '', $taint,
- map { $_->[1] }
- sort { $a->[0] <=> $b->[0] }
- map { /^([0-9a-fA-F]+)/; [ CORE::hex($1), $_ ] }
- grep { /^([0-9a-fA-F]+)/ and not $seen{$1}++ } @tmp; # XXX doesn't do ranges right
+
+ # Separate the extras from the code point list, and for
+ # user-defined properties, make sure the latter are well-behaved
+ # for downstream code.
+ if ($user_defined) {
+ my @tmp = split(/^/m, $list);
+ my %seen;
+ no warnings;
+
+ # The extras are anything that doesn't begin with a hex digit.
+ $extras = join '', $taint, grep /^[^0-9a-fA-F]/, @tmp;
+
+ # Remove the extras, and sort the remaining entries by the
+ # numeric value of their beginning hex digits, removing any
+ # duplicates.
+ $list = join '', $taint,
+ map { $_->[1] }
+ sort { $a->[0] <=> $b->[0] }
+ map { /^([0-9a-fA-F]+)/; [ CORE::hex($1), $_ ] }
+ grep { /^([0-9a-fA-F]+)/ and not $seen{$1}++ } @tmp; # XXX doesn't do ranges right
+ }
+ else {
+ # mktables has gone to some trouble to make non-user defined
+ # properties well-behaved, so we can skip the effort we do for
+ # user-defined ones. Any extras are at the very beginning of
+ # the string.
+
+ # This regex splits out the first lines of $list into $1 and
+ # strips them off from $list, until we get one that begins
+ # with a hex number, alone on the line, or followed by a tab.
+ # Either portion may be empty.
+ $list =~ s/ \A ( .*? )
+ (?: \z | (?= ^ [0-9a-fA-F]+ (?: \t | $) ) )
+ //msx;
+
+ $extras = "$taint$1";
+ }
}
if ($none) {
elsif ($c =~ /^([0-9a-fA-F]+)/) {
$subobj = utf8->SWASHNEW("", $c, $minbits, 0);
}
+ print STDERR __LINE__, ": returned from getting sub object for $name\n" if DEBUG;
if (! ref $subobj) {
pop @recursed if @recursed && $type;
return $subobj;
}
push @extras, $name => $subobj;
$bits = $subobj->{BITS} if $bits < $subobj->{BITS};
+ $user_defined = $subobj->{USER_DEFINED}
+ if $subobj->{USER_DEFINED};
}
}
}
}
if (DEBUG) {
- print STDERR __LINE__, ": CLASS = $class, TYPE => $type, BITS => $bits, NONE => $none";
+ print STDERR __LINE__, ": CLASS = $class, TYPE => $type, BITS => $bits, NONE => $none, INVERT_IT => $invert_it, USER_DEFINED => $user_defined";
print STDERR "\nLIST =>\n$list" if defined $list;
print STDERR "\nEXTRAS =>\n$extras" if defined $extras;
print STDERR "\n";
EXTRAS => $extras,
LIST => $list,
NONE => $none,
+ USER_DEFINED => $user_defined,
@extras,
} => $class;
if ($file) {
- $Cache{$class, $file} = $SWASH;
+ $Cache{$class, $file, $invert_it} = $SWASH;
if ($type
&& exists $utf8::SwashInfo{$type}
&& exists $utf8::SwashInfo{$type}{'specials_name'})
{
my $specials_name = $utf8::SwashInfo{$type}{'specials_name'};
no strict "refs";
- print STDERR "\nspecials_name => $SWASH->{'SPECIALS'}\n" if DEBUG;
+ print STDERR "\nspecials_name => $specials_name\n" if DEBUG;
$SWASH->{'SPECIALS'} = \%$specials_name;
}
+ $SWASH->{'INVERT_IT'} = $invert_it;
}
pop @recursed if @recursed && $type;
}
}
-# Now SWASHGET is recasted into a C function S_swash_get (see utf8.c).
+# Now SWASHGET is recasted into a C function S_swatch_get (see utf8.c).
1;
https://perl5.git.perl.org / perl5.git / blobdiff