You can think of a module as the fundamental unit of reusable Perl
code; see L<perlmod> for details. Whenever anyone creates a chunk of
Perl code that they think will be useful to the world, they register
-as a Perl developer at http://www.perl.com/CPAN/modules/04pause.html
+as a Perl developer at L<http://www.cpan.org/modules/04pause.html>
so that they can then upload their code to the CPAN. The CPAN is the
Comprehensive Perl Archive Network and can be accessed at
-http://www.perl.com/CPAN/.
+L<http://www.cpan.org/> , and searched at L<http://search.cpan.org/> .
This documentation is for people who want to download CPAN modules
and install them on their own computer.
=head2 PREAMBLE
-You have a file ending in .tar.gz (or, less often, .zip). You know
-there's a tasty module inside. There are four steps you must now
+First, are you sure that the module isn't already on your system? Try
+C<perl -MFoo -e 1>. (Replace "Foo" with the name of the module; for
+instance, C<perl -MCGI::Carp -e 1>.)
+
+If you don't see an error message, you have the module. (If you do
+see an error message, it's still possible you have the module, but
+that it's not in your path, which you can display with C<perl -e
+"print qq(@INC)">.) For the remainder of this document, we'll assume
+that you really honestly truly lack an installed module, but have
+found it on the CPAN.
+
+So now you have a file ending in .tar.gz (or, less often, .zip). You
+know there's a tasty module inside. There are four steps you must now
take:
=over 5
=back
Here's how to perform each step for each operating system. This is
-I<not> a substitute for reading the README and INSTALL files that
+<not> a substitute for reading the README and INSTALL files that
might have come with your module!
Also note that these instructions are tailored for installing the
-module into your system's repository of Perl modules. But you can
+module into your system's repository of Perl modules, but you can
install modules into any directory you wish. For instance, where I
-say C<perl Makefile.PL>, you can substitute C<perl
-Makefile.PL PREFIX=/my/perl_directory> to install the modules
-into C</my/perl_directory>. Then you can use the modules
-from your Perl programs with C<use lib
-"/my/perl_directory/lib/site_perl";> or sometimes just C<use
-"/my/perl_directory";>.
+say C<perl Makefile.PL>, you can substitute C<perl Makefile.PL
+PREFIX=/my/perl_directory> to install the modules into
+F</my/perl_directory>. Then you can use the modules from your Perl
+programs with C<use lib "/my/perl_directory/lib/site_perl";> or
+sometimes just C<use "/my/perl_directory";>. If you're on a system
+that requires superuser/root access to install modules into the
+directories you see when you type C<perl -e "print qq(@INC)">, you'll
+want to install them into a local directory (such as your home
+directory) and use this approach.
=over 4
=item *
-B<If you're on Unix,>
+B<If you're on a Unix or Unix-like system,>
-You can use Andreas Koenig's CPAN module
-( http://www.perl.com/CPAN/modules/by-module/CPAN )
+You can use Andreas Koenig's CPAN module
+( L<http://www.cpan.org/modules/by-module/CPAN> )
to automate the following steps, from DECOMPRESS through INSTALL.
-A. DECOMPRESS
+A. DECOMPRESS
Decompress the file with C<gzip -d yourmodule.tar.gz>
-You can get gzip from ftp://prep.ai.mit.edu/pub/gnu.
+You can get gzip from L<ftp://prep.ai.mit.edu/pub/gnu/>
Or, you can combine this step with the next to save disk space:
Go into the newly-created directory and type:
perl Makefile.PL
- make
make test
+or
+
+ perl Makefile.PL PREFIX=/my/perl_directory
+
+to install it locally. (Remember that if you do this, you'll have to
+put C<use lib "/my/perl_directory";> near the top of the program that
+is to use this module.
+
D. INSTALL
While still in that directory, type:
in your Perl 5 library directory. Often, you'll need to be root.
That's all you need to do on Unix systems with dynamic linking.
-Most Unix systems have dynamic linking -- if yours doesn't, or if for
+Most Unix systems have dynamic linking. If yours doesn't, or if for
another reason you have a statically-linked perl, B<and> the
module requires compilation, you'll need to build a new Perl binary
that includes the module. Again, you'll probably need to be root.
=item *
-B<If you're running Windows 95 or NT with the ActiveState port of Perl>
+B<If you're running ActivePerl (Win95/98/2K/NT/XP, Linux, Solaris),>
+
+First, type C<ppm> from a shell and see whether ActiveState's PPM
+repository has your module. If so, you can install it with C<ppm> and
+you won't have to bother with any of the other steps here. You might
+be able to use the CPAN instructions from the "Unix or Linux" section
+above as well; give it a try. Otherwise, you'll have to follow the
+steps below.
A. DECOMPRESS
-You can use the shareware Winzip ( http://www.winzip.com ) to
+You can use the shareware Winzip ( L<http://www.winzip.com> ) to
decompress and unpack modules.
B. UNPACK
C. BUILD
-Does the module require compilation (i.e. does it have files
-that end in .xs, .c, .h, .y, .cc, .cxx, or .C)? If it does, you're on
-your own. You can try compiling it yourself if you have a C compiler.
-If you're successful, consider uploading the resulting binary to the
-CPAN for others to use. If it doesn't, go to INSTALL.
-
- D. INSTALL
-
-Copy the module into your Perl's I<lib> directory. That'll be one
-of the directories you see when you type
-
- perl -e 'print "@INC"'
-
-=item *
-
-B<If you're running Windows 95 or NT with the core Windows distribution of Perl,>
-
- A. DECOMPRESS
-
-When you download the module, make sure it ends in either
-C<.tar.gz> or C<.zip>. Windows browsers sometimes
-download C<.tar.gz> files as C<_tar.tar>, because
-early versions of Windows prohibited more than one dot in a filename.
-
-You can use the shareware WinZip ( http://www.winzip.com ) to
-decompress and unpack modules.
-
-Or, you can use InfoZip's C<unzip> utility (
-http://www.cdrom.com/pub/infozip/Info-Zip.html ) to uncompress
-C<.zip> files; type C<unzip yourmodule.zip> in
-your shell.
+You'll need the C<nmake> utility, available at
+L<http://download.microsoft.com/download/vc15/Patch/1.52/W95/EN-US/nmake15.exe>
+or dmake, available on CPAN.
+L<http://search.cpan.org/dist/dmake/>
-Or, if you have a working C<tar> and C<gzip>, you can
-type
-
- gzip -cd yourmodule.tar.gz | tar xvf -
-
-in the shell to decompress C<yourmodule.tar.gz>. This will
-UNPACK your module as well.
-
- B. UNPACK
-
-All of the methods in DECOMPRESS will have done this for you.
-
- C. BUILD
+Does the module require compilation (i.e. does it have files that end
+in .xs, .c, .h, .y, .cc, .cxx, or .C)? If it does, life is now
+officially tough for you, because you have to compile the module
+yourself (no easy feat on Windows). You'll need a compiler such as
+Visual C++. Alternatively, you can download a pre-built PPM package
+from ActiveState.
+L<http://aspn.activestate.com/ASPN/Downloads/ActivePerl/PPM/>
Go into the newly-created directory and type:
perl Makefile.PL
- dmake
- dmake test
+ nmake test
-Depending on your perl configuration, C<dmake> might not be
-available. You might have to substitute whatever C<perl
--V:make> says. (Usually, that will be C<nmake> or
-C<make>.)
D. INSTALL
While still in that directory, type:
- dmake install
-
-=item *
-
-B<If you're using a Macintosh,>
-
-A. DECOMPRESS
-
-You can either use StuffIt Expander ( http://www.aladdinsys.com/ ) in
-combination with I<DropStuff with Expander Enhancer>
-(shareware), or the freeware MacGzip (
-http://persephone.cps.unizar.es/general/gente/spd/gzip/gzip.html ).
-
-B. UNPACK
-
-If you're using DropStuff or Stuffit, you can just extract the tar
-archive. Otherwise, you can use the freeware I<suntar> (
-http://www.cirfid.unibo.it/~speranza ).
-
-C. BUILD
-
-Does the module require compilation?
-
-1. If it does,
-
-Overview: You need MPW and a combination of new and old CodeWarrior
-compilers for MPW and libraries. Makefiles created for building under
-MPW use the Metrowerks compilers. It's most likely possible to build
-without other compilers, but it has not been done successfully, to our
-knowledge. Read the documentation in MacPerl: Power and Ease (
-http://www.ptf.com/macperl/ ) on porting/building extensions, or find
-an existing precompiled binary, or hire someone to build it for you.
-
-Or, ask someone on the mac-perl mailing list (mac-perl@iis.ee.ethz.ch)
-to build it for you. To subscribe to the mac-perl mailing list, send
-mail to mac-perl-request@iis.ee.ethz.ch.
-
-2. If the module doesn't require compilation, go to INSTALL.
-
-D. INSTALL
-
-Make sure the newlines for the modules are in Mac format, not Unix format.
-Move the files manually into the correct folders.
-
-Move the files to their final destination: This will
-most likely be in C<$ENV{MACPERL}site_lib:> (i.e.,
-C<HD:MacPerl folder:site_lib:>). You can add new paths to
-the default C<@INC> in the Preferences menu item in the
-MacPerl application (C<$ENV{MACPERL}site_lib:> is added
-automagically). Create whatever directory structures are required
-(i.e., for C<Some::Module>, create
-C<$ENV{MACPERL}site_lib:Some:> and put
-C<Module.pm> in that directory).
-
-Run the following script (or something like it):
-
- #!perl -w
- use AutoSplit;
- my $dir = "${MACPERL}site_perl";
- autosplit("$dir:Some:Module.pm", "$dir:auto", 0, 1, 1);
-
-Eventually there should be a way to automate the installation process; some
-solutions exist, but none are ready for the general public yet.
+ nmake install
=item *
A. DECOMPRESS
-djtarx ( ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2/ )
-will both uncompress and unpack.
+djtarx ( L<ftp://ftp.delorie.com/pub/djgpp/current/v2/> )
+will both uncompress and unpack.
B. UNPACK
Go into the newly-created directory and type:
perl Makefile.PL
- make
make test
-You will need the packages mentioned in C<Readme.dos>
+You will need the packages mentioned in F<README.dos>
in the Perl distribution.
D. INSTALL
While still in that directory, type:
make install
-
-You will need the packages mentioned in Readme.dos in the Perl distribution.
+
+You will need the packages mentioned in F<README.dos> in the Perl distribution.
=item *
B<If you're on OS/2,>
Get the EMX development suite and gzip/tar, from either Hobbes (
-http://hobbes.nmsu.edu ) or Leo ( http://www.leo.org ), and then follow
+L<http://hobbes.nmsu.edu> ) or Leo ( L<http://www.leo.org> ), and then follow
the instructions for Unix.
=item *
A. DECOMPRESS
-Type
+Type
gzip -d Your-Module.tgz
-or, for zipped modules, type
+or, for zipped modules, type
unzip Your-Module.zip
-Executables for gzip, zip, and VMStar ( Alphas:
-http://www.openvms.digital.com/cd/000TOOLS/ALPHA/ and Vaxen:
-http://www.openvms.digital.com/cd/000TOOLS/VAX/ ).
+Executables for gzip, zip, and VMStar:
+
+ http://www.hp.com/go/openvms/freeware/
+
+and their source code:
-gzip and tar
-are also available at ftp://ftp.digital.com/pub/VMS.
+ http://www.fsf.org/order/ftp.html
Note that GNU's gzip/gunzip is not the same as Info-ZIP's zip/unzip
package. The former is a simple compression tool; the latter permits
tar/extract/verbose Your_Module.tar
-C. BUILD
+C. BUILD
-Make sure you have MMS (from Digital) or the freeware MMK ( available from MadGoat at http://www.madgoat.com ). Then type this to create the
-DESCRIP.MMS for the module:
+Make sure you have MMS (from Digital) or the freeware MMK ( available
+from MadGoat at L<http://www.madgoat.com> ). Then type this to create
+the DESCRIP.MMS for the module:
perl Makefile.PL
Now you're ready to build:
- mms
mms test
Substitute C<mmk> for C<mms> above if you're using MMK.
D. INSTALL
-Type
+Type
mms install
B<If you're on MVS>,
-Introduce the .tar.gz file into an HFS as binary; don't translate from
+Introduce the F<.tar.gz> file into an HFS as binary; don't translate from
ASCII to EBCDIC.
-A. DECOMPRESS
+A. DECOMPRESS
- Decompress the file with C<gzip -d yourmodule.tar.gz>
+Decompress the file with C<gzip -d yourmodule.tar.gz>
- You can get gzip from
- http://www.s390.ibm.com/products/oe/bpxqp1.html.
+You can get gzip from
+L<http://www.s390.ibm.com/products/oe/bpxqp1.html>
B. UNPACK
-Unpack the result with
+Unpack the result with
pax -o to=IBM-1047,from=ISO8859-1 -r < yourmodule.tar
The BUILD and INSTALL steps are identical to those for Unix. Some
modules generate Makefiles that work better with GNU make, which is
-available from http://www.mks.com/s390/gnu/index.htm.
+available from L<http://www.mks.com/s390/gnu/>
+
+=back
+
+=head1 PORTABILITY
+
+Note that not all modules will work with on all platforms.
+See L<perlport> for more information on portability issues.
+Read the documentation to see if the module will work on your
+system. There are basically three categories
+of modules that will not work "out of the box" with all
+platforms (with some possibility of overlap):
+
+=over 4
+
+=item *
+
+B<Those that should, but don't.> These need to be fixed; consider
+contacting the author and possibly writing a patch.
+
+=item *
+
+B<Those that need to be compiled, where the target platform
+doesn't have compilers readily available.> (These modules contain
+F<.xs> or F<.c> files, usually.) You might be able to find
+existing binaries on the CPAN or elsewhere, or you might
+want to try getting compilers and building it yourself, and then
+release the binary for other poor souls to use.
+
+=item *
+
+B<Those that are targeted at a specific platform.>
+(Such as the Win32:: modules.) If the module is targeted
+specifically at a platform other than yours, you're out
+of luck, most likely.
=back
+
+
+Check the CPAN Testers if a module should work with your platform
+but it doesn't behave as you'd expect, or you aren't sure whether or
+not a module will work under your platform. If the module you want
+isn't listed there, you can test it yourself and let CPAN Testers know,
+you can join CPAN Testers, or you can request it be tested.
+
+ http://testers.cpan.org/
+
+
=head1 HEY
If you have any suggested changes for this page, let me know. Please
don't send me mail asking for help on how to install your modules.
There are too many modules, and too few Orwants, for me to be able to
answer or even acknowledge all your questions. Contact the module
-author instead, or post to comp.lang.perl.modules, or ask someone
-familiar with Perl on your operating system.
+author instead, ask someone familiar with Perl on your operating
+system, or if all else fails, file a ticket at L<http://rt.cpan.org/>.
=head1 AUTHOR
-Jon Orwant
-
-orwant@tpj.com
+Jon Orwant
-The Perl Journal, http://tpj.com
+orwant@medita.mit.edu
-with invaluable help from Brandon Allbery, Charles Bailey, Graham
-Barr, Dominic Dunlop, Jarkko Hietaniemi, Ben Holzman, Tom Horsley,
-Nick Ing-Simmons, Tuomas J. Lukka, Laszlo Molnar, Chris Nandor, Alan
-Olsen, Peter Prymmer, Gurusamy Sarathy, Christoph Spalinger, Dan
-Sugalski, Larry Virden, and Ilya Zakharevich.
+with invaluable help from Chris Nandor, and valuable help from Brandon
+Allbery, Charles Bailey, Graham Barr, Dominic Dunlop, Jarkko
+Hietaniemi, Ben Holzman, Tom Horsley, Nick Ing-Simmons, Tuomas
+J. Lukka, Laszlo Molnar, Alan Olsen, Peter Prymmer, Gurusamy Sarathy,
+Christoph Spalinger, Dan Sugalski, Larry Virden, and Ilya Zakharevich.
-July 22, 1998
+First version July 22, 1998; last revised November 21, 2001.
=head1 COPYRIGHT
-Copyright (C) 1998 Jon Orwant. All Rights Reserved.
-
-Permission is granted to make and distribute verbatim copies of this
-documentation provided the copyright notice and this permission notice are
-preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-documentation under the conditions for verbatim copying, provided also
-that they are marked clearly as modified versions, that the authors'
-names and title are unchanged (though subtitles and additional
-authors' names may be added), and that the entire resulting derived
-work is distributed under the terms of a permission notice identical
-to this one.
-
-Permission is granted to copy and distribute translations of this
-documentation into another language, under the above conditions for
-modified versions.
+Copyright (C) 1998, 2002, 2003 Jon Orwant. All Rights Reserved.
+This document may be distributed under the same terms as Perl itself.
https://perl5.git.perl.org / perl5.git / blobdiff