in the Perl language in the current release. Please see
pod/perldelta.pod for a description of what's changed. See your
installed copy of the perllocal.pod file for a (possibly incomplete)
-list of locally installed modules. Also see CPAN::autobundle for one
-way to make a "bundle" of your currently installed modules.
+list of locally installed modules. Also see the L<CPAN> module's
+C<autobundle> function for one way to make a "bundle" of your currently
+installed modules.
=head1 Run Configure
To build a shared libperl, the environment variable controlling shared
library search (LD_LIBRARY_PATH in most systems, DYLD_LIBRARY_PATH for
-NeXTSTEP/OPENSTEP/Darwin, LIBRARY_PATH for BeOS, LD_LIBRARY_PATH/SHLIB_PATH
+NeXTSTEP/OPENSTEP/Darwin, LD_LIBRARY_PATH/SHLIB_PATH
for HP-UX, LIBPATH for AIX, PATH for Cygwin) must be set up to include
the Perl build directory because that's where the shared libperl will
be created. Configure arranges makefile to have the correct shared
=item Directories for the perl distribution
-By default, Configure will use the following directories for 5.17.0.
+By default, Configure will use the following directories for 5.17.11.
$version is the full perl version number, including subversion, e.g.
5.12.3, and $archname is a string like sun4-sunos,
determined by Configure. The full definitions of all Configure
CPAN) or scripts. Configure will set up the following directories to
be used for installing those add-on modules and scripts.
- Configure variable Default value
- $siteprefixexp $prefixexp
- $sitebinexp $siteprefixexp/bin
- $sitescriptexp $siteprefixexp/bin
- $sitelibexp $siteprefixexp/lib/perl5/site_perl/$version
- $sitearchexp $siteprefixexp/lib/perl5/site_perl/$version/$archname
- $siteman1direxp $siteprefixexp/man/man1
- $siteman3direxp $siteprefixexp/man/man3
- $sitehtml1direxp (none)
- $sitehtml3direxp (none)
+ Configure Default
+ variable value
+ $siteprefixexp $prefixexp
+ $sitebinexp $siteprefixexp/bin
+ $sitescriptexp $siteprefixexp/bin
+ $sitelibexp $siteprefixexp/lib/perl5/site_perl/$version
+ $sitearchexp
+ $siteprefixexp/lib/perl5/site_perl/$version/$archname
+ $siteman1direxp $siteprefixexp/man/man1
+ $siteman3direxp $siteprefixexp/man/man3
+ $sitehtml1direxp (none)
+ $sitehtml3direxp (none)
By default, ExtUtils::MakeMaker will install architecture-independent
modules into $sitelib and architecture-dependent modules into $sitearch.
distribution, Configure can optionally set up the following directories
for you to use to distribute add-on modules.
- Configure variable Default value
- $vendorprefixexp (none)
- (The next ones are set only if vendorprefix is set.)
- $vendorbinexp $vendorprefixexp/bin
- $vendorscriptexp $vendorprefixexp/bin
- $vendorlibexp
- $vendorprefixexp/lib/perl5/vendor_perl/$version
- $vendorarchexp
- $vendorprefixexp/lib/perl5/vendor_perl/$version/$archname
- $vendorman1direxp $vendorprefixexp/man/man1
- $vendorman3direxp $vendorprefixexp/man/man3
- $vendorhtml1direxp (none)
- $vendorhtml3direxp (none)
+ Configure Default
+ variable value
+ $vendorprefixexp (none)
+
+ (The next ones are set only if vendorprefix is set.)
+
+ $vendorbinexp $vendorprefixexp/bin
+ $vendorscriptexp $vendorprefixexp/bin
+ $vendorlibexp $vendorprefixexp/lib/perl5/vendor_perl/$version
+ $vendorarchexp
+ $vendorprefixexp/lib/perl5/vendor_perl/$version/$archname
+ $vendorman1direxp $vendorprefixexp/man/man1
+ $vendorman3direxp $vendorprefixexp/man/man3
+ $vendorhtml1direxp (none)
+ $vendorhtml3direxp (none)
These are normally empty, but may be set as needed. For example,
a vendor might choose the following settings:
- $prefix /usr
- $siteprefix /usr/local
- $vendorprefix /usr
+ $prefix /usr
+ $siteprefix /usr/local
+ $vendorprefix /usr
This would have the effect of setting the following:
- $binexp /usr/bin
- $scriptdirexp /usr/bin
- $privlibexp /usr/lib/perl5/$version
- $archlibexp /usr/lib/perl5/$version/$archname
- $man1direxp /usr/man/man1
- $man3direxp /usr/man/man3
-
- $sitebinexp /usr/local/bin
- $sitescriptexp /usr/local/bin
- $sitelibexp /usr/local/lib/perl5/site_perl/$version
- $sitearchexp /usr/local/lib/perl5/site_perl/$version/$archname
- $siteman1direxp /usr/local/man/man1
- $siteman3direxp /usr/local/man/man3
-
- $vendorbinexp /usr/bin
- $vendorscriptexp /usr/bin
- $vendorlibexp /usr/lib/perl5/vendor_perl/$version
- $vendorarchexp /usr/lib/perl5/vendor_perl/$version/$archname
- $vendorman1direxp /usr/man/man1
- $vendorman3direxp /usr/man/man3
+ $binexp /usr/bin
+ $scriptdirexp /usr/bin
+ $privlibexp /usr/lib/perl5/$version
+ $archlibexp /usr/lib/perl5/$version/$archname
+ $man1direxp /usr/man/man1
+ $man3direxp /usr/man/man3
+
+ $sitebinexp /usr/local/bin
+ $sitescriptexp /usr/local/bin
+ $sitelibexp /usr/local/lib/perl5/site_perl/$version
+ $sitearchexp /usr/local/lib/perl5/site_perl/$version/$archname
+ $siteman1direxp /usr/local/man/man1
+ $siteman3direxp /usr/local/man/man3
+
+ $vendorbinexp /usr/bin
+ $vendorscriptexp /usr/bin
+ $vendorlibexp /usr/lib/perl5/vendor_perl/$version
+ $vendorarchexp /usr/lib/perl5/vendor_perl/$version/$archname
+ $vendorman1direxp /usr/man/man1
+ $vendorman3direxp /usr/man/man3
Note how in this example, the vendor-supplied directories are in the
/usr hierarchy, while the directories reserved for the end user are in
site-specific files that are stored elsewhere on your organization's
network. One way to do that would be something like
- sh Configure -Dsiteprefix=/usr/local -Dvendorprefix=/usr/share/perl
+ sh Configure -Dsiteprefix=/usr/local -Dvendorprefix=/usr/share/perl
=item otherlibdirs
directory, and has to include architecture-dependent directories separately,
eg.
- sh Configure -Dinc_version_list="5.17.0/x86_64-linux 5.14.0" ...
+ sh Configure -Dinc_version_list="5.16.0/x86_64-linux 5.16.0" ...
When using the newer perl, you can add these paths again in the
PERL5LIB environment variable or with perl's -I runtime option.
=head2 DTrace support
-On platforms where DTrace is available, it may be enabled by
+On platforms where DTrace is available, it may be enabled by
using the -Dusedtrace option to Configure. DTrace probes are available for
subroutine entry (sub-entry) and subroutine exit (sub-exit). Here's a
simple D script that uses them:
It is possible to specify this from the command line (all on one
line):
- sh Configure -de \
- -Dlocincpth='/usr/local/BerkeleyDB.4.7/include /usr/local/include' \
- -Dloclibpth='/usr/local/BerkeleyDB.4.7/lib /usr/local/lib' \
- -Aldflags='-R/usr/local/BerkeleyDB.4.7/lib'
+ sh Configure -de \
+ -Dlocincpth='/usr/local/BerkeleyDB.4.7/include \
+ /usr/local/include' \
+ -Dloclibpth='/usr/local/BerkeleyDB.4.7/lib /usr/local/lib' \
+ -Aldflags='-R/usr/local/BerkeleyDB.4.7/lib'
locincpth is a space-separated list of include directories to search.
Configure will automatically add the appropriate -I directives.
Perl can be cross-compiled. It is just not trivial, cross-compilation
rarely is. Perl is routinely cross-compiled for many platforms (as of
-June 2005 at least PocketPC aka WinCE, Open Zaurus, EPOC, Symbian, and
+June 2005 at least PocketPC aka WinCE, Open Zaurus, Symbian, and
the IBM OS/400). These platforms are known as the B<target> platforms,
while the systems where the compilation takes place are the B<host>
platforms.
Cross/README
-=item EPOC
-
-README.epoc
-
=item Symbian
README.symbian
scripts
- cppstdin This is used by the deprecated switch perl -P, if
- your cc -E can't read from stdin.
- c2ph, pstruct Scripts for handling C structures in header files.
+ cppstdin This is used by the deprecated switch perl -P,
+ if your cc -E can't read from stdin.
+ c2ph, pstruct Scripts for handling C structures in header
+ files.
config_data Manage Module::Build-like module configuration.
- corelist Shows versions of modules that come with different
+ corelist Shows versions of modules that come with
+ different
versions of perl.
cpan The CPAN shell.
cpan2dist The CPANPLUS distribution creator.
cpanp-run-perl A helper for cpanp.
enc2xs Encoding module generator.
find2perl find-to-perl translator.
- h2ph Extract constants and simple macros from C headers.
+ h2ph Extract constants and simple macros from C
+ headers.
h2xs Converts C .h header files to Perl extensions.
instmodsh A shell to examine installed modules.
libnetcfg Configure libnet.
shasum A tool to print or check SHA checksums.
splain Describe Perl warnings and errors.
xsubpp Compiler to convert Perl XS code into C code.
- zipdetails display the internal structure of zip files
+ zipdetails display the internal structure of zip files
library files
=head1 Coexistence with earlier versions of perl 5
-Perl 5.17 is not binary compatible with earlier versions of Perl.
+Perl 5.17.11 is not binary compatible with earlier versions of Perl.
In other words, you will have to recompile your XS modules.
In general, you can usually safely upgrade from one version of Perl (e.g.
libraries after 5.6.0, but not for executables. TODO?) One convenient
way to do this is by using a separate prefix for each version, such as
- sh Configure -Dprefix=/opt/perl5.17.0
+ sh Configure -Dprefix=/opt/perl5.17.11
-and adding /opt/perl5.17.0/bin to the shell PATH variable. Such users
+and adding /opt/perl5.17.11/bin to the shell PATH variable. Such users
may also wish to add a symbolic link /usr/local/bin/perl so that
scripts can still start with #!/usr/local/bin/perl.
subversions may not have all the compatibility wrinkles ironed out
yet.
-=head2 Upgrading from 5.16.0 or earlier
+=head2 Upgrading from 5.17.9 or earlier
-B<Perl 5.17.0 may not be is binary incompatible with Perl 5.16.0 or
-earlier Perl release.> Perl modules having binary parts
+B<Perl 5.17.11 may not be binary compatible with Perl 5.17.9 or
+earlier Perl releases.> Perl modules having binary parts
(meaning that a C compiler is used) will have to be recompiled to be
-used with 5.17.0. If you find you do need to rebuild an extension with
-5.17.0, you may safely do so without disturbing the older
+used with 5.17.11. If you find you do need to rebuild an extension with
+5.17.11, you may safely do so without disturbing the older
installations. (See L<"Coexistence with earlier versions of perl 5">
above.)
print("$f\n");
}
-in Linux with perl-5.17.0 is as follows (under $Config{prefix}):
+in Linux with perl-5.17.11 is as follows (under $Config{prefix}):
./bin/perl
- ./lib/perl5/5.17.0/strict.pm
- ./lib/perl5/5.17.0/warnings.pm
- ./lib/perl5/5.17.0/i686-linux/File/Glob.pm
- ./lib/perl5/5.17.0/feature.pm
- ./lib/perl5/5.17.0/XSLoader.pm
- ./lib/perl5/5.17.0/i686-linux/auto/File/Glob/Glob.so
+ ./lib/perl5/5.17.11/strict.pm
+ ./lib/perl5/5.17.11/warnings.pm
+ ./lib/perl5/5.17.11/i686-linux/File/Glob.pm
+ ./lib/perl5/5.17.11/feature.pm
+ ./lib/perl5/5.17.11/XSLoader.pm
+ ./lib/perl5/5.17.11/i686-linux/auto/File/Glob/Glob.so
Secondly, for perl-5.10.1, the Debian perl-base package contains 591 files,
(of which 510 are for lib/unicore) totaling about 3.5MB in its i386 version.
it's a minimal set) and if you want to find out all the files you can
use something like the below
- strace perl -le 'do "x.pl"' 2>&1 | perl -nle '/^open\(\"(.+?)"/ && print $1'
+ strace perl -le 'do "x.pl"' 2>&1 \
+ | perl -nle '/^open\(\"(.+?)"/ && print $1'
(The 'strace' is Linux-specific, other similar utilities include 'truss'
and 'ktrace'.)