;;
rhapsody*|darwin*)
shrpldflags="${ldflags} -dynamiclib \
- -compatibility_version 1 \
+ -compatibility_version \
+ ${api_revision}.${api_version}.${api_subversion} \
-current_version \
- ${api_version}.${api_subversion} \
+ ${revision}.${patchlevel}.${subversion} \
-install_name \$(shrpdir)/\$@"
;;
cygwin*)
# Any special object files needed by this architecture, e.g. os2/os2.obj
ARCHOBJS = $archobjs
-.SUFFIXES: .c \$(OBJ_EXT)
+.SUFFIXES: .c \$(OBJ_EXT) .i .s
# grrr
SHELL = $sh
# how to tr(anslate) newlines
TRNL = '$trnl'
+OPTIMIZE = $optimize
+
+EXTRAS = $extras
+
+INSTALLPREFIXEXP = $prefix
+
!GROK!THIS!
# not used by Makefile but by installperl;
# mentioned here so that metaconfig picks these up
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>Makefile <<'!NO!SUBS!'
-CCCMD = `sh $(shellflags) cflags $(LIBPERL) $@`
+CCCMD = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $(LIBPERL) $@`
-private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm
+CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $(LIBPERL) $<`
+
+private = preplibrary lib/Config.pm lib/ExtUtils/Miniperl.pm
# Files to be built with variable substitution before miniperl
# is available.
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
h3 = opcode.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
-h5 = utf8.h warnings.h
+h5 = utf8.h warnings.h sharedsv.h
h = $(h1) $(h2) $(h3) $(h4) $(h5)
c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c
c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c
-c4 = globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c
+c4 = globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c sharedsv.c
c = $(c1) $(c2) $(c3) $(c4) miniperlmain.c perlmain.c
obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT)
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) sharedsv$(OBJ_EXT)
obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
.c$(OBJ_EXT):
$(CCCMD) $(PLDLFLAGS) $*.c
-all: $(FIRSTMAKEFILE) miniperl extra.pods $(private) $(public) $(dynamic_ext) $(nonxs_ext)
+.c.i:
+ $(CCCMDSRC) -E $*.c > $*.i
+
+.c.s:
+ $(CCCMDSRC) -S $*.c
+
+.PHONY: all compile translators utilities
+
+all: $(FIRSTMAKEFILE) miniperl extra.pods $(private) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
@echo " ";
@echo " Everything is up to date. 'make test' to run test suite."
# Phony target to force checking subdirectories.
# Apparently some makes require an action for the FORCE target.
+.PHONY: FORCE
FORCE:
@sh -c true
!NO!SUBS!
perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
-@rm -f miniperl.xok
- $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX) $(PERL_PROFILING) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
# Purify/Quantify Perls.
perl.config.dashpg:
@echo "Checking optimize='-pg' in config.sh..."
@grep "^optimize=" config.sh
- @grep "^optimize='-pg'" config.sh >/dev/null || exit 1
+ @grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1
perl.gprof.config: config.sh
@echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..."
@$(MAKE) perl.config.dashpg
perl.gprof: /usr/bin/gprof perl.gprof.config
- $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILING=-pg perl
+ @-rm -f perl
+ $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl
@echo "Now you may run perl.gprof and then run gprof perl.gprof."
+# Gcov Perl
+
+perl.config.gcov:
+ @echo "To build perl.gcov you must use gcc 3.0 or newer, checking..."
+ @echo "Checking gccversion in config.sh..."
+ @grep "^gccversion=" config.sh
+ @grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1
+ @echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..."
+ @echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..."
+ @grep "^ccflags=" config.sh
+ @grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1
+
+perl.gcov: perl.config.gcov
+ @-rm -f perl
+ $(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl
+ @echo "Now you may run perl.gcov and then run gcov some.c."
+
# Microperl. This is just a convenience thing if one happens to
# build also the full Perl and therefore the real big Makefile:
# usually one should manually explicitly issue the below command.
+.PHONY: microperl
microperl:
$(MAKE) -f Makefile.micro
# We have to call our ./makedir because Ultrix 4.3 make can't handle the line
# test -d lib/auto || mkdir lib/auto
#
-preplibrary: miniperl lib/Config.pm lib/lib.pm lib/re.pm
+.PHONY: preplibrary
+preplibrary: miniperl lib/Config.pm lib/lib.pm
@sh ./makedir lib/auto
@echo " AutoSplitting perl library"
$(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
+ $(MAKE) lib/re.pm
# Take care to avoid modifying lib/Config.pm without reason
# (If trying to create a new port and having problems with the configpm script,
# try 'make minitest' and/or commenting out the tests at the end of configpm.)
-lib/Config.pm: config.sh miniperl configpm lib/re.pm
+lib/Config.pm: config.sh miniperl configpm
$(LDLIBPTH) ./miniperl configpm configpm.tmp
sh mv-if-diff configpm.tmp $@
lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
$(LDLIBPTH) ./miniperl minimod.pl > minimod.tmp
sh mv-if-diff minimod.tmp $@
+ -touch lib/ExtUtils/Miniperl.pm
lib/re.pm: ext/re/re.pm
- @-rm -f $@
- cat ext/re/re.pm > $@
+ cp ext/re/re.pm ext/re/re.tmp && sh mv-if-diff ext/re/re.tmp lib/re.pm
$(plextract): miniperl lib/Config.pm
@-rm -f $@
cd pod ; $(LNS) ../$$x "perl"$$nx".pod" ; cd .. ; \
echo "pod/perl"$$nx".pod" >> extra.pods ; \
done
+ -@rm -f pod/perlvms.pod
-@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods
+extras.make: perl
+ -@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
+
+extras.test: perl
+ -@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
+
+extras.install: perl
+ -@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
+
+.PHONY: install install-strip install-all install-verbose install-silent \
+ no-install install.perl install.man installman install.html installhtml
+
install-strip:
$(MAKE) STRIPFLAGS=-s install
else :; \
fi
$(LDLIBPTH) ./perl installperl $(INSTALLFLAGS) $(STRIPFLAGS)
+ $(MAKE) extras.install
install.man: all installman
$(LDLIBPTH) ./perl installman $(INSTALLFLAGS)
# to run with precisely the same version of byacc as I use. You
# normally shouldn't remake perly.[ch].
+.PHONY: check_byacc run_byacc
+
check_byacc:
@$(BYACC) -V 2>&1 | grep 'version 1\.8\.2'
# To force them to be regenerated, type
# make regen_headers
-keywords.h: keywords.pl
- -perl keywords.pl
-
-OPCODE_PL_OUTPUT = opcode.h opnames.h pp_proto.h pp.sym
-
-$(OPCODE_PL_OUTPUT): opcode.pl
- -perl opcode.pl
-
-# Really the prerequisites for the next rule should only be "embed.pl pp.sym"
-# Writing it this way gives make a big hint to always run opcode.pl before
-# embed.pl. The alternative - running embed.pl then opcode.pl causes embed.pl
-# to be re-run next make invocation, and then all object files get recompiled.
-
-proto.h embed.h embedvar.h global.sym objXSUB.h perlapi.h perlapi.c pod/perlintern.pod pod/perlapi.pod: embed.pl $(OPCODE_PL_OUTPUT)
- -perl embed.pl
-
-ext/ByteLoader/byterun.h ext/ByteLoader/byterun.c ext/B/B/Asmdata.pm: bytecode.pl
- -perl bytecode.pl
-
-regnodes.h: regcomp.pl
- -perl regcomp.pl
-
-warnings.h lib/warnings.pm: warnings.pl
- -perl warnings.pl
-
AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \
embed.h embedvar.h global.sym \
pod/perlintern.pod pod/perlapi.pod \
ext/ByteLoader/byterun.c ext/B/B/Asmdata.pm regnodes.h \
warnings.h lib/warnings.pm
+.PHONY: regen_headers regen_pods regen_all
+
regen_headers: FORCE
-$(CHMOD_W) $(AUTOGEN_FILES)
-perl keywords.pl
n_dummy $(nonxs_ext): miniperl preplibrary $(DYNALOADER) FORCE
@$(LDLIBPTH) sh ext/util/make_ext nonxs $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+.PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \
+ realclean _realcleaner clobber _clobber \
+ distclean veryclean _verycleaner
+
clean: _tidy _mopup
realclean: _realcleaner _mopup
_clobber:
-@rm -f Cross/run-* Cross/to-* Cross/from-*
- rm -f config.sh cppstdin Policy.sh
+ rm -f config.sh cppstdin Policy.sh extras.lst
clobber: _realcleaner _mopup _clobber
# If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
# for that spot.
+.PHONY: lint
lint: $(c)
lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
$(SHELL) config_h.SH
# When done, touch perlmain.c so that it doesn't get remade each time.
+.PHONY: depend
depend: makedepend
sh ./makedepend MAKE=$(MAKE)
- test -s perlmain.c && touch perlmain.c
makedepend: makedepend.SH config.sh
sh ./makedepend.SH
+.PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \
+ test_tty test-tty _test_tty test_notty test-notty _test_notty \
+ utest ucheck test.utf8 check.utf8 \
+ test.third check.third utest.third ucheck.third test_notty.third \
+ test.deparse test_notty.deparse \
+ minitest
+
# Cannot delegate rebuilding of t/perl to make
# to allow interlaced test and minitest
-_test_prep: $(PERL)$(EXE_EXT)
+TESTFILE=TEST
+
+_test_prep:
cd t && (rm -f $(PERL)$(EXE_EXT); $(LNS) ../$(PERL)$(EXE_EXT) $(PERL)$(EXE_EXT))
-test_prep: miniperl ./perl$(EXE_EXT) preplibrary utilities $(dynamic_ext) $(nonxs_ext) $(TEST_PERL_DLL)
+# Architecture-neutral stuff:
+
+test_prep_pre: preplibrary utilities $(nonxs_ext)
+
+test_prep: test_prep_pre miniperl perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL)
PERL=./perl $(MAKE) _test_prep
_test_tty:
- cd t && $(LDLIBPTH) $(PERL_DEBUG) $(PERL) TEST $(TEST_ARGS) </dev/tty
+ cd t && $(LDLIBPTH) $(PERL_DEBUG) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty
_test_notty:
- cd t && $(LDLIBPTH) $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(PERL) TEST $(TEST_ARGS)
+ cd t && $(LDLIBPTH) $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(PERL) $(TESTFILE) $(TEST_ARGS)
# The second branch is for testing without a tty or controlling terminal,
# see t/op/stat.t
_test:
if (true </dev/tty) >/dev/null 2>&1; then \
- $(MAKE) TEST_ARGS=$(TEST_ARGS) _test_tty ; \
+ $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_tty ; \
else \
- $(MAKE) TEST_ARGS=$(TEST_ARGS) _test_notty ; \
+ $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_notty ; \
fi
@echo "Ran tests" > t/rantests
# Targets for Third Degree testing.
-test_prep.third: test_prep perl.third
+test_prep.third: test_prep perl.third perl.third$(EXE_EXT)
PERL=./perl.third $(MAKE) _test_prep
test.third check.third: test_prep.third perl.third
@echo "You may see some irrelevant test failures if you have been unable"
@echo "to build lib/Config.pm."
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
- && $(LDLIBPTH) ./perl TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t pragma/*.t </dev/tty
+ && $(LDLIBPTH) ./perl TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t </dev/tty
+
+# Test via harness
+
+test_harness: test_prep
+ PERL=./perl $(MAKE) TESTFILE=harness _test
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
# Please *don't* use this unless all tests pass.
# If you want to report test failures, use "make nok" instead.
+
+.PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack
+
ok: utilities
$(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)'
nokfilenack: utilities
$(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A
+.PHONY: clist hlist shlist pllist
+
clist: $(c)
echo $(c) | tr ' ' $(TRNL) >.clist
Makefile: Makefile.SH ./config.sh
$(SHELL) Makefile.SH
+.PHONY: distcheck
distcheck: FORCE
perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
+.PHONY: elc
elc: emacs/cperl-mode.elc
emacs/cperl-mode.elc: emacs/cperl-mode.el
-cd emacs; emacs -batch -q -no-site-file -f batch-byte-compile cperl-mode.el
+.PHONY: etags ctags tags
+
etags: TAGS
TAGS: emacs/cperl-mode.elc
https://perl5.git.perl.org / perl5.git / blobdiff