*/
#ifndef lint
-#ifdef DEBUGGING
-#define RCHECK
-#endif
+# if defined(DEBUGGING) && !defined(NO_RCHECK)
+# define RCHECK
+# endif
/*
* malloc.c (Caltech) 2/21/82
* Chris Kingsley, kingsley@cit-20.
#define MAGIC 0xff /* magic # on accounting info */
#define RMAGIC 0x55555555 /* magic # on range info */
#ifdef RCHECK
-#define RSLOP sizeof (u_int)
+# define RSLOP sizeof (u_int)
+# ifdef TWO_POT_OPTIMIZE
+# define MAX_SHORT_BUCKET 12
+# else
+# define MAX_SHORT_BUCKET 13
+# endif
#else
-#define RSLOP 0
+# define RSLOP 0
#endif
#ifdef PACK_MALLOC
# define MAX_PACKED 6
# define MAX_2_POT_ALGO ((1<<(MAX_PACKED + 1)) - M_OVERHEAD)
# define TWOK_MASK ((1<<11) - 1)
-# define TWOK_MASKED(x) ((int)x & ~TWOK_MASK)
-# define TWOK_SHIFT(x) ((int)x & TWOK_MASK)
+# define TWOK_MASKED(x) ((u_int)(x) & ~TWOK_MASK)
+# define TWOK_SHIFT(x) ((u_int)(x) & TWOK_MASK)
# define OV_INDEXp(block) ((u_char*)(TWOK_MASKED(block)))
# define OV_INDEX(block) (*OV_INDEXp(block))
# define OV_MAGIC(block,bucket) (*(OV_INDEXp(block) + \
# define MAX_NONSHIFT 2 /* Shift 64 greater than chunk 32. */
};
-# ifdef DEBUGGING_MSTATS
-static u_int sbrk_slack;
-static u_int start_slack;
-# endif
-
#else /* !PACK_MALLOC */
# define OV_MAGIC(block,bucket) (block)->ov_magic
#ifdef TWO_POT_OPTIMIZE
-# define PERL_PAGESIZE 4096
-# define FIRST_BIG_TWO_POT 14 /* 16K */
+# ifndef PERL_PAGESIZE
+# define PERL_PAGESIZE 4096
+# endif
+# ifndef FIRST_BIG_TWO_POT
+# define FIRST_BIG_TWO_POT 14 /* 16K */
+# endif
# define FIRST_BIG_BLOCK (1<<FIRST_BIG_TWO_POT) /* 16K */
/* If this value or more, check against bigger blocks. */
# define FIRST_BIG_BOUND (FIRST_BIG_BLOCK - M_OVERHEAD)
#endif /* TWO_POT_OPTIMIZE */
-#ifdef PERL_EMERGENCY_SBRK
+#if defined(PERL_EMERGENCY_SBRK) && defined(PERL_CORE)
#ifndef BIG_SIZE
# define BIG_SIZE (1<<16) /* 64K */
return (char *)-1; /* Now die die die... */
/* Got it, now detach SvPV: */
- pv = SvPV(sv);
+ pv = SvPV(sv, na);
/* Check alignment: */
- if ((pv - M_OVERHEAD) & (1<<11 - 1)) {
+ if (((u_int)(pv - M_OVERHEAD)) & ((1<<11) - 1)) {
PerlIO_puts(PerlIO_stderr(),"Bad alignment of $^M!\n");
- return -1; /* die die die */
+ return (char *)-1; /* die die die */
}
emergency_buffer = pv - M_OVERHEAD;
SvPOK_off(sv);
SvREADONLY_on(sv);
die("Out of memory!"); /* croak may eat too much memory. */
- } else if (emergency_buffer_size >= size) {
+ }
+ else if (emergency_buffer_size >= size) {
emergency_buffer_size -= size;
return emergency_buffer + emergency_buffer_size;
}
return (char *)-1; /* poor guy... */
}
-#else /* !PERL_EMERGENCY_SBRK */
+#else /* !(defined(TWO_POT_OPTIMIZE) && defined(PERL_CORE)) */
# define emergency_sbrk(size) -1
-#endif /* !PERL_EMERGENCY_SBRK */
+#endif /* !(defined(TWO_POT_OPTIMIZE) && defined(PERL_CORE)) */
/*
* nextf[i] is the pointer to the next free block of size 2^(i+3). The
* for a given block size.
*/
static u_int nmalloc[NBUCKETS];
+static u_int goodsbrk;
+static u_int sbrk_slack;
+static u_int start_slack;
#endif
#ifdef DEBUGGING
register int bucket = 0;
register MEM_SIZE shiftr;
-#ifdef PERL_CORE
-#ifdef DEBUGGING
+#if defined(DEBUGGING) || defined(RCHECK)
MEM_SIZE size = nbytes;
#endif
+#ifdef PERL_CORE
#ifdef HAS_64K_LIMIT
if (nbytes > 0xffff) {
- PerlIO_printf(PerlIO_stderr(), "Allocation too large: %lx\n", (long)nbytes);
+ PerlIO_printf(PerlIO_stderr(),
+ "Allocation too large: %lx\n", (long)nbytes);
my_exit(1);
}
#endif /* HAS_64K_LIMIT */
#ifdef DEBUGGING
if ((long)nbytes < 0)
- croak("panic: malloc");
+ croak("panic: malloc");
#endif
#endif /* PERL_CORE */
* space used per block for accounting.
*/
#ifdef PACK_MALLOC
- if (nbytes > MAX_2_POT_ALGO) {
+ if (nbytes == 0)
+ nbytes = 1;
+ else if (nbytes > MAX_2_POT_ALGO)
#endif
+ {
#ifdef TWO_POT_OPTIMIZE
- if (nbytes >= FIRST_BIG_BOUND) {
- nbytes -= PERL_PAGESIZE;
- }
+ if (nbytes >= FIRST_BIG_BOUND)
+ nbytes -= PERL_PAGESIZE;
#endif
- nbytes += M_OVERHEAD;
- nbytes = (nbytes + 3) &~ 3;
-#ifdef PACK_MALLOC
- } else if (nbytes == 0) {
- nbytes = 1;
+ nbytes += M_OVERHEAD;
+ nbytes = (nbytes + 3) &~ 3;
}
-#endif
shiftr = (nbytes - 1) >> 2;
/* apart from this loop, this is O(1) */
while (shiftr >>= 1)
}
#ifdef PERL_CORE
- DEBUG_m(PerlIO_printf(Perl_debug_log, "0x%lx: (%05d) malloc %ld bytes\n",
- (unsigned long)(p+1),an++,(long)size));
+ DEBUG_m(PerlIO_printf(Perl_debug_log, "0x%lx: (%05lu) malloc %ld bytes\n",
+ (unsigned long)(p+1),(unsigned long)(an++),(long)size));
#endif /* PERL_CORE */
/* remove from linked list */
#ifndef PACK_MALLOC
OV_INDEX(p) = bucket;
#endif
-#ifdef DEBUGGING_MSTATS
- nmalloc[bucket]++;
-#endif
#ifdef RCHECK
/*
* Record allocated size of block and
* bound space with magic numbers.
*/
+ nbytes = (size + M_OVERHEAD + 3) &~ 3;
if (nbytes <= 0x10000)
p->ov_size = nbytes - 1;
p->ov_rmagic = RMAGIC;
register union overhead *op;
register int rnu; /* 2^rnu bytes will be requested */
register int nblks; /* become nblks blocks of the desired size */
- register MEM_SIZE siz;
+ register MEM_SIZE siz, needed;
int slack = 0;
if (nextf[bucket])
#ifndef atarist /* on the atari we dont have to worry about this */
op = (union overhead *)sbrk(0);
# ifndef I286
-# ifdef PACK_MALLOC
- if ((int)op & 0x7ff)
- (void)sbrk(slack = 2048 - ((int)op & 0x7ff));
-# else
- if ((int)op & 0x3ff)
- (void)sbrk(slack = 1024 - ((int)op & 0x3ff));
-# endif
-# if defined(DEBUGGING_MSTATS) && defined(PACK_MALLOC)
- sbrk_slack += slack;
+ if ((UV)op & (0x7FF >> CHUNK_SHIFT)) {
+ slack = (0x800 >> CHUNK_SHIFT) - ((UV)op & (0x7FF >> CHUNK_SHIFT));
+ (void)sbrk(slack);
+# if defined(DEBUGGING_MSTATS)
+ sbrk_slack += slack;
# endif
+ }
# else
/* The sbrk(0) call on the I286 always returns the next segment */
# endif
rnu = (bucket <= 11) ? 14 : bucket + 3;
#endif
nblks = 1 << (rnu - (bucket + 3)); /* how many blocks to get */
- /* if (rnu < bucket)
- rnu = bucket; Why anyone needs this? */
+ needed = (MEM_SIZE)1 << rnu;
#ifdef TWO_POT_OPTIMIZE
- op = (union overhead *)sbrk((1L << rnu)
- + ( bucket >= (FIRST_BIG_TWO_POT - 3)
- ? PERL_PAGESIZE : 0));
-#else
- op = (union overhead *)sbrk(1L << rnu);
+ needed += (bucket >= (FIRST_BIG_TWO_POT - 3) ? PERL_PAGESIZE : 0);
#endif
+ op = (union overhead *)sbrk(needed);
/* no more room! */
- if ((int)op == -1 &&
- (int)(op = (union overhead *)emergency_sbrk(size)) == -1)
+ if (op == (union overhead *)-1) {
+ op = (union overhead *)emergency_sbrk(needed);
+ if (op == (union overhead *)-1)
return;
+ }
+#ifdef DEBUGGING_MSTATS
+ goodsbrk += needed;
+#endif
/*
* Round up to minimum allocation size boundary
* and deduct from block count to reflect.
*/
#ifndef I286
# ifdef PACK_MALLOC
- if ((int)op & 0x7ff)
+ if ((UV)op & 0x7FF)
croak("panic: Off-page sbrk");
# endif
- if ((int)op & 7) {
- op = (union overhead *)(((MEM_SIZE)op + 8) &~ 7);
+ if ((UV)op & 7) {
+ op = (union overhead *)(((UV)op + 8) & ~7);
nblks--;
}
#else
} else op++; /* One chunk per block. */
#endif /* !PACK_MALLOC */
nextf[bucket] = op;
+#ifdef DEBUGGING_MSTATS
+ nmalloc[bucket] += nblks;
+#endif
while (--nblks > 0) {
op->ov_next = (union overhead *)((caddr_t)op + siz);
op = (union overhead *)((caddr_t)op + siz);
#endif
#ifdef PERL_CORE
- DEBUG_m(PerlIO_printf(Perl_debug_log, "0x%lx: (%05d) free\n",(unsigned long)cp,an++));
+ DEBUG_m(PerlIO_printf(Perl_debug_log, "0x%lx: (%05lu) free\n",(unsigned long)cp,(unsigned long)(an++)));
#endif /* PERL_CORE */
if (cp == NULL)
#ifdef PACK_MALLOC
bucket = OV_INDEX(op);
#endif
-#ifdef DEBUGGING
- ASSERT(OV_MAGIC(op, bucket) == MAGIC); /* make sure it was in use */
-#else
if (OV_MAGIC(op, bucket) != MAGIC) {
- static bad_free_warn = -1;
+ static int bad_free_warn = -1;
if (bad_free_warn == -1) {
char *pbf = getenv("PERL_BADFREE");
bad_free_warn = (pbf) ? atoi(pbf) : 1;
#endif
return; /* sanity */
}
-#endif
#ifdef RCHECK
ASSERT(op->ov_rmagic == RMAGIC);
- if (OV_INDEX(op) <= 13)
+ if (OV_INDEX(op) <= MAX_SHORT_BUCKET)
ASSERT(*(u_int *)((caddr_t)op + op->ov_size + 1 - RSLOP) == RMAGIC);
op->ov_rmagic = RMAGIC - 1;
#endif
size = OV_INDEX(op);
op->ov_next = nextf[size];
nextf[size] = op;
-#ifdef DEBUGGING_MSTATS
- nmalloc[size]--;
-#endif
}
/*
int was_alloced = 0;
char *cp = (char*)mp;
-#ifdef PERL_CORE
#ifdef DEBUGGING
MEM_SIZE size = nbytes;
#endif
+#ifdef PERL_CORE
#ifdef HAS_64K_LIMIT
if (nbytes > 0xffff) {
- PerlIO_printf(PerlIO_stderr(), "Reallocation too large: %lx\n", size);
+ PerlIO_printf(PerlIO_stderr(),
+ "Reallocation too large: %lx\n", size);
my_exit(1);
}
#endif /* HAS_64K_LIMIT */
* Record new allocated size of block and
* bound space with magic numbers.
*/
- if (OV_INDEX(op) <= 13) {
+ if (OV_INDEX(op) <= MAX_SHORT_BUCKET) {
/*
* Convert amount of memory requested into
* closest block size stored in hash buckets
#ifdef PERL_CORE
#ifdef DEBUGGING
if (debug & 128) {
- PerlIO_printf(PerlIO_stderr(), "0x%lx: (%05d) rfree\n",(unsigned long)res,an++);
- PerlIO_printf(PerlIO_stderr(), "0x%lx: (%05d) realloc %ld bytes\n",
- (unsigned long)res,an++,(long)size);
+ PerlIO_printf(PerlIO_stderr(), "0x%lx: (%05lu) rfree\n",(unsigned long)res,(unsigned long)(an++));
+ PerlIO_printf(PerlIO_stderr(), "0x%lx: (%05lu) realloc %ld bytes\n",
+ (unsigned long)res,(unsigned long)(an++),(long)size);
}
#endif
#endif /* PERL_CORE */
{
register int i, j;
register union overhead *p;
- int topbucket=0, totfree=0, totused=0;
+ int topbucket=0, totfree=0, total=0;
u_int nfree[NBUCKETS];
for (i=0; i < NBUCKETS; i++) {
;
nfree[i] = j;
totfree += nfree[i] * (1 << (i + 3));
- totused += nmalloc[i] * (1 << (i + 3));
- if (nfree[i] || nmalloc[i])
+ total += nmalloc[i] * (1 << (i + 3));
+ if (nmalloc[i])
topbucket = i;
}
if (s)
PerlIO_printf(PerlIO_stderr(), "Memory allocation statistics %s (buckets 8..%d)\n",
s, (1 << (topbucket + 3)) );
- PerlIO_printf(PerlIO_stderr(), " %7d free: ", totfree);
+ PerlIO_printf(PerlIO_stderr(), "%8d free:", totfree);
for (i=0; i <= topbucket; i++) {
- PerlIO_printf(PerlIO_stderr(), (i<5)?" %5d":" %3d", nfree[i]);
+ PerlIO_printf(PerlIO_stderr(), (i<5 || i==7)?" %5d": (i<9)?" %3d":" %d", nfree[i]);
}
- PerlIO_printf(PerlIO_stderr(), "\n %7d used: ", totused);
+ PerlIO_printf(PerlIO_stderr(), "\n%8d used:", total - totfree);
for (i=0; i <= topbucket; i++) {
- PerlIO_printf(PerlIO_stderr(), (i<5)?" %5d":" %3d", nmalloc[i]);
+ PerlIO_printf(PerlIO_stderr(), (i<5 || i==7)?" %5d": (i<9)?" %3d":" %d", nmalloc[i] - nfree[i]);
}
- PerlIO_printf(PerlIO_stderr(), "\n");
-#ifdef PACK_MALLOC
- if (sbrk_slack || start_slack) {
- PerlIO_printf(PerlIO_stderr(), "Odd ends: %7d bytes from sbrk(), %7d from malloc.\n",
- sbrk_slack, start_slack);
- }
-#endif
+ PerlIO_printf(PerlIO_stderr(), "\nTotal sbrk(): %8d. Odd ends: sbrk(): %7d, malloc(): %7d bytes.\n",
+ goodsbrk + sbrk_slack, sbrk_slack, start_slack);
}
#else
void
# endif
# ifdef PERL_SBRK_VIA_MALLOC
-# ifdef HIDEMYMALLOC
+# if defined(HIDEMYMALLOC) || defined(EMBEDMYMALLOC)
# undef malloc
# else
-# include "Error: -DPERL_SBRK_VIA_MALLOC requires -DHIDEMYMALLOC"
+# include "Error: -DPERL_SBRK_VIA_MALLOC needs -D(HIDE|EMBED)MYMALLOC"
# endif
/* it may seem schizophrenic to use perl's malloc and let it call system */
https://perl5.git.perl.org / perl5.git / blobdiff