*/
/*#define HAS_ALARM / **/
-/* HASATTRIBUTE:
- * This symbol indicates the C compiler can check for function attributes,
- * such as printf formats. This is normally only supported by GNU cc.
- */
-/*#define HASATTRIBUTE / **/
-#ifndef HASATTRIBUTE
-#define __attribute__(_arg_)
-#endif
-
/* HAS_BCMP:
* This symbol is defined if the bcmp() routine is available to
* compare blocks of memory.
* available to read directory entries. You may have to include
* <dirent.h>. See I_DIRENT.
*/
-/*#define HAS_READDIR / **/
+#define HAS_READDIR /**/
/* HAS_SEEKDIR:
* This symbol, if defined, indicates that the seekdir routine is
* to rename files. Otherwise you should do the unlink(), link(), unlink()
* trick.
*/
-/*#define HAS_RENAME / **/
+#define HAS_RENAME /**/
/* HAS_RMDIR:
* This symbol, if defined, indicates that the rmdir routine is
* whether dirent is available or not. You should use this pseudo type to
* portably declare your directory entries.
*/
-/*#define I_DIRENT / **/
+#define I_DIRENT /**/
/*#define DIRNAMLEN / **/
#define Direntry_t struct dirent
* This symbol, if defined, indicates that <stdlib.h> exists and should
* be included.
*/
-/*#define I_STDLIB / **/
+#define I_STDLIB /**/
/* I_STRING:
* This symbol, if defined, indicates to the C program that it should
*/
/*#define I_VFORK / **/
-/* INTSIZE:
- * This symbol contains the value of sizeof(int) so that the C
- * preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- * This symbol contains the value of sizeof(long) so that the C
- * preprocessor can make decisions based on it.
- */
-/* SHORTSIZE:
- * This symbol contains the value of sizeof(short) so that the C
- * preprocessor can make decisions based on it.
- */
-#define INTSIZE 4 /**/
-#define LONGSIZE 4 /**/
-#define SHORTSIZE 2 /**/
-
-/* MULTIARCH:
- * This symbol, if defined, signifies that the build
- * process will produce some binary files that are going to be
- * used in a cross-platform environment. This is the case for
- * example with the NeXT "fat" binaries that contain executables
- * for several CPUs.
- */
-/*#define MULTIARCH / **/
-
-/* HAS_QUAD:
- * This symbol, if defined, tells that there's a 64-bit integer type,
- * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
- * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
- */
-/*#define HAS_QUAD / **/
-#ifdef HAS_QUAD
-# define Quad_t int64_t /**/
-# define Uquad_t uint64_t /**/
-# define QUADKIND 4 /**/
-# define QUAD_IS_INT 1
-# define QUAD_IS_LONG 2
-# define QUAD_IS_LONG_LONG 3
-# define QUAD_IS_INT64_T 4
-#endif
-
/* HAS_ACCESSX:
* This symbol, if defined, indicates that the accessx routine is
* available to do extended access checks.
#define OSNAME "unknown" /**/
#define OSVERS "" /**/
+/* USE_CROSS_COMPILE:
+ * This symbol, if defined, indicates that Perl is being cross-compiled.
+ */
+/* PERL_TARGETARCH:
+ * This symbol, if defined, indicates the target architecture
+ * Perl has been cross-compiled to. Undefined if not a cross-compile.
+ */
+#ifndef USE_CROSS_COMPILE
+/*#define USE_CROSS_COMPILE / **/
+#define PERL_TARGETARCH "" /**/
+#endif
+
+/* MULTIARCH:
+ * This symbol, if defined, signifies that the build
+ * process will produce some binary files that are going to be
+ * used in a cross-platform environment. This is the case for
+ * example with the NeXT "fat" binaries that contain executables
+ * for several CPUs.
+ */
+/*#define MULTIARCH / **/
+
/* MEM_ALIGNBYTES:
* This symbol contains the number of bytes required to align a
* double, or a long double when applicable. Usual values are 2,
* This symbol contains the ~name expanded version of ARCHLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/*#define ARCHLIB "/usr/local/lib/perl5/5.7/unknown" / **/
-/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.7/unknown" / **/
+/*#define ARCHLIB "/usr/local/lib/perl5/5.9/unknown" / **/
+/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.9/unknown" / **/
/* ARCHNAME:
* This symbol holds a string representing the architecture name.
#define BIN "/usr/local/bin" /**/
#define BIN_EXP "" /**/
+/* INTSIZE:
+ * This symbol contains the value of sizeof(int) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* LONGSIZE:
+ * This symbol contains the value of sizeof(long) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* SHORTSIZE:
+ * This symbol contains the value of sizeof(short) so that the C
+ * preprocessor can make decisions based on it.
+ */
+#define INTSIZE 4 /**/
+#define LONGSIZE 4 /**/
+#define SHORTSIZE 2 /**/
+
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
* in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
#endif /* NeXT */
/* CAT2:
- * This macro catenates 2 tokens together.
+ * This macro concatenates 2 tokens together.
*/
/* STRINGIFY:
* This macro surrounds its token with double quotes.
#define STRINGIFY(a) PeRl_StGiFy(a)
#endif
#if 42 != 1 && 42 != 42
-# include "Bletch: How does this C preprocessor catenate tokens?"
+# include "Bletch: How does this C preprocessor concatenate tokens?"
#endif
/* CPPSTDIN:
*/
/*#define HAS_MADVISE / **/
+/* HAS_MALLOC_SIZE:
+ * This symbol, if defined, indicates that the malloc_size
+ * routine is available for use.
+ */
+/*#define HAS_MALLOC_SIZE / **/
+
+/* HAS_MALLOC_GOOD_SIZE:
+ * This symbol, if defined, indicates that the malloc_good_size
+ * routine is available for use.
+ */
+/*#define HAS_MALLOC_GOOD_SIZE / **/
+
/* HAS_MEMCHR:
* This symbol, if defined, indicates that the memchr routine is available
* to locate characters within a C string.
*/
/*#define HAS_STRUCT_MSGHDR / **/
-/* HAS_NANOSLEEP:
- * This symbol, if defined, indicates that the nanosleep
- * system call is available to sleep with 1E-9 sec accuracy.
- */
-/*#define HAS_NANOSLEEP / **/
-
/* HAS_OFF64_T:
* This symbol will be defined if the C compiler supports off64_t.
*/
#define Siglongjmp(buf,retval) longjmp((buf),(retval))
#endif
+/* USE_SITECUSTOMIZE:
+ * This symbol, if defined, indicates that sitecustomize should
+ * be used.
+ */
+/*#define USE_SITECUSTOMIZE / **/
+
/* HAS_SOCKET:
* This symbol, if defined, indicates that the BSD socket interface is
* supported.
* This symbol, if defined, indicates that the strtoul routine is
* available to provide conversion of strings to unsigned long.
*/
-/*#define HAS_STRTOUL / **/
+#define HAS_STRTOUL /**/
/* HAS_STRTOULL:
* This symbol, if defined, indicates that the strtoull routine is
*/
/*#define HAS_UNORDERED / **/
+/* HAS_UNSETENV:
+ * This symbol, if defined, indicates that the unsetenv () routine is
+ * available for use.
+ */
+/*#define HAS_UNSETENV / **/
+
/* HAS_USTAT:
* This symbol, if defined, indicates that the ustat system call is
* available to query file system statistics by dev_t.
/*#define I_SYS_TIME / **/
/*#define I_SYS_TIME_KERNEL / **/
/*#define HAS_TM_TM_ZONE / **/
-/*#define HAS_TM_TM_GMTOFF / **/
+/*#define HAS_TM_TM_GMTOFF / **/
/* I_USTAT:
* This symbol, if defined, indicates that <ustat.h> exists and
#define Malloc_t void * /**/
#define Free_t int /**/
+/* PERL_MALLOC_WRAP:
+ * This symbol, if defined, indicates that we'd like malloc wrap checks.
+ */
+/*#define PERL_MALLOC_WRAP / **/
+
/* MYMALLOC:
* This symbol, if defined, indicates that we're using our own malloc.
*/
*/
/*#define PERL_OTHERLIBDIRS "" / **/
+/* HAS_QUAD:
+ * This symbol, if defined, tells that there's a 64-bit integer type,
+ * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
+ * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
+ */
+/*#define HAS_QUAD / **/
+#ifdef HAS_QUAD
+# define Quad_t int64_t /**/
+# define Uquad_t uint64_t /**/
+# define QUADKIND 4 /**/
+# define QUAD_IS_INT 1
+# define QUAD_IS_LONG 2
+# define QUAD_IS_LONG_LONG 3
+# define QUAD_IS_INT64_T 4
+#endif
+
/* IVTYPE:
* This symbol defines the C type used for Perl's IV.
*/
* This symbol contains the number of bits a variable of type NVTYPE
* can preserve of a variable of type UVTYPE.
*/
+/* NV_ZERO_IS_ALLBITS_ZERO:
+ * This symbol, if defined, indicates that a variable of type NVTYPE
+ * stores 0.0 in memory as all bits zero.
+ */
#define IVTYPE long /**/
#define UVTYPE unsigned long /**/
#define I8TYPE char /**/
#define NVSIZE 8 /**/
#undef NV_PRESERVES_UV
#define NV_PRESERVES_UV_BITS 0
+#undef NV_ZERO_IS_ALLBITS_ZERO
+#if UVSIZE == 8
+# ifdef BYTEORDER
+# if BYTEORDER == 0x1234
+# undef BYTEORDER
+# define BYTEORDER 0x12345678
+# else
+# if BYTEORDER == 0x4321
+# undef BYTEORDER
+# define BYTEORDER 0x87654321
+# endif
+# endif
+# endif
+#endif
/* IVdf:
* This symbol defines the format string used for printing a Perl IV
* This symbol contains the ~name expanded version of PRIVLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define PRIVLIB "/usr/local/lib/perl5/5.7" /**/
-#define PRIVLIB_EXP "/usr/local/lib/perl5/5.7" /**/
+#define PRIVLIB "/usr/local/lib/perl5/5.9" /**/
+#define PRIVLIB_EXP "/usr/local/lib/perl5/5.9" /**/
/* PTRSIZE:
* This symbol contains the size of a pointer, so that the C preprocessor
* etc., where nn is the actual signal number (e.g. NUM37).
* The signal number for sig_name[i] is stored in sig_num[i].
* The last element is 0 to terminate the list with a NULL. This
- * corresponds to the 0 at the end of the sig_num list.
+ * corresponds to the 0 at the end of the sig_name_init list.
+ * Note that this variable is initialized from the sig_name_init,
+ * not from sig_name (which is unused).
*/
/* SIG_NUM:
* This symbol contains a list of signal numbers, in the same order as the
* The signal number corresponding to sig_name[i] is sig_number[i].
* if (i < NSIG) then sig_number[i] == i.
* The last element is 0, corresponding to the 0 at the end of
- * the sig_name list.
+ * the sig_name_init list.
+ * Note that this variable is initialized from the sig_num_init,
+ * not from sig_num (which is unused).
*/
/* SIG_SIZE:
- * This variable contains the number of elements of the sig_name
- * and sig_num arrays, excluding the final NULL entry.
+ * This variable contains the number of elements of the SIG_NAME
+ * and SIG_NUM arrays, excluding the final NULL entry.
*/
#define SIG_NAME 0 /**/
#define SIG_NUM 0 /**/
* unsigned long, int, etc. It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
-#define Size_t int /* length paramater for string functions */
+#define Size_t size_t /* length paramater for string functions */
/* Sock_size_t:
* This symbol holds the type used for the size argument of
* This symbol, if defined, indicates that Perl should be built to
* use the interpreter-based threading implementation.
*/
+/* USE_5005THREADS:
+ * This symbol, if defined, indicates that Perl should be built to
+ * use the 5.005-based threading implementation.
+ */
/* OLD_PTHREADS_API:
* This symbol, if defined, indicates that Perl should
* be built to use the old draft POSIX threads API.
* try to use the various _r versions of library functions.
* This is extremely experimental.
*/
+/*#define USE_5005THREADS / **/
/*#define USE_ITHREADS / **/
+#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
+#define USE_THREADS /* until src is revised*/
+#endif
/*#define OLD_PTHREADS_API / **/
/*#define USE_REENTRANT_API / **/
#define M_VOID /* Xenix strikes again */
#endif
-/* PERL_XS_APIVERSION:
- * This variable contains the version of the oldest perl binary
- * compatible with the present perl. perl.c:incpush() and
- * lib/lib.pm will automatically search in for older
- * directories across major versions back to xs_apiversion.
- * This is only useful if you have a perl library directory tree
- * structured like the default one.
- * See INSTALL for how this works.
- * The versioned site_perl directory was introduced in 5.005,
- * so that is the lowest possible value.
- * Since this can depend on compile time options
- * it is set by Configure. Other non-default sources
- * of potential incompatibility, such as multiplicity, threads,
- * debugging, 64bits, sfio, etc., are not checked for currently,
- * though in principle we could go snooping around in old
- * Config.pm files.
- */
-/* PERL_PM_APIVERSION:
- * This variable contains the version of the oldest perl
- * compatible with the present perl. (That is, pure perl modules
- * written for pm_apiversion will still work for the current
- * version). perl.c:incpush() and lib/lib.pm will automatically
- * search in for older directories across major versions
- * back to pm_apiversion. This is only useful if you have a perl
- * library directory tree structured like the default one. The
- * versioned site_perl library was introduced in 5.005, so that's
- * the default setting for this variable. It's hard to imagine
- * it changing before Perl6. It is included here for symmetry
- * with xs_apiveprsion -- the searching algorithms will
- * (presumably) be similar.
- * See the INSTALL file for how this works.
- */
-#define PERL_XS_APIVERSION "5.008"
-#define PERL_PM_APIVERSION "5.005"
+/* HASATTRIBUTE_FORMAT:
+ * Can we handle GCC attribute for checking printf-style formats
+ */
+/* HASATTRIBUTE_MALLOC:
+ * Can we handle GCC attribute for malloc-style functions.
+ */
+/* HASATTRIBUTE_NONNULL:
+ * Can we handle GCC attribute for nonnull function parms.
+ */
+/* HASATTRIBUTE_NORETURN:
+ * Can we handle GCC attribute for functions that do not return
+ */
+/* HASATTRIBUTE_PURE:
+ * Can we handle GCC attribute for pure functions
+ */
+/* HASATTRIBUTE_UNUSED:
+ * Can we handle GCC attribute for unused variables and arguments
+ */
+/* HASATTRIBUTE_WARN_UNUSED_RESULT:
+ * Can we handle GCC attribute for warning on unused results
+ */
+/*#define HASATTRIBUTE_FORMAT / **/
+/*#define HASATTRIBUTE_NORETURN / **/
+/*#define HASATTRIBUTE_MALLOC / **/
+/*#define HASATTRIBUTE_NONNULL / **/
+/*#define HASATTRIBUTE_PURE / **/
+/*#define HASATTRIBUTE_UNUSED / **/
+/*#define HASATTRIBUTE_WARN_UNUSED_RESULT / **/
/* HAS_CRYPT:
* This symbol, if defined, indicates that the crypt routine is available
*/
#define SH_PATH "" /**/
-/* USE_CROSS_COMPILE:
- * This symbol, if defined, indicates that Perl is being cross-compiled.
+/* HAS_AINTL:
+ * This symbol, if defined, indicates that the aintl routine is
+ * available. If copysignl is also present we can emulate modfl.
*/
-/* PERL_TARGETARCH:
- * This symbol, if defined, indicates the target architecture
- * Perl has been cross-compiled to. Undefined if not a cross-compile.
+/*#define HAS_AINTL / **/
+
+/* HAS_COPYSIGNL:
+ * This symbol, if defined, indicates that the copysignl routine is
+ * available. If aintl is also present we can emulate modfl.
*/
-#ifndef USE_CROSS_COMPILE
-/*#define USE_CROSS_COMPILE / **/
-#define PERL_TARGETARCH "" /**/
-#endif
+/*#define HAS_COPYSIGNL / **/
/* HAS_DBMINIT_PROTO:
* This symbol, if defined, indicates that the system provides
*/
/*#define HAS_DIRFD / **/
+/* HAS_FAST_STDIO:
+ * This symbol, if defined, indicates that the "fast stdio"
+ * is available to manipulate the stdio buffers directly.
+ */
+/*#define HAS_FAST_STDIO / **/
+
/* HAS_FLOCK_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the flock() function. Otherwise, it is up
*/
/*#define HAS_FPCLASSL / **/
+/* HAS_ILOGBL:
+ * This symbol, if defined, indicates that the ilogbl routine is
+ * available. If scalbnl is also present we can emulate frexpl.
+ */
+/*#define HAS_ILOGBL / **/
+
+/* LIBM_LIB_VERSION:
+ * This symbol, if defined, indicates that libm exports _LIB_VERSION
+ * and that math.h defines the enum to manipulate it.
+ */
+/*#define LIBM_LIB_VERSION / **/
+
/* HAS_NL_LANGINFO:
* This symbol, if defined, indicates that the nl_langinfo routine is
* available to return local data. You will also need <langinfo.h>
#define PROCSELFEXE_PATH /**/
#endif
+/* HAS_PTHREAD_ATTR_SETSCOPE:
+ * This symbol, if defined, indicates that the pthread_attr_setscope
+ * system call is available to set the contention scope attribute of
+ * a thread attribute object.
+ */
+/*#define HAS_PTHREAD_ATTR_SETSCOPE / **/
+
+/* HAS_SCALBNL:
+ * This symbol, if defined, indicates that the scalbnl routine is
+ * available. If ilogbl is also present we can emulate frexpl.
+ */
+/*#define HAS_SCALBNL / **/
+
/* HAS_SIGPROCMASK:
* This symbol, if defined, indicates that the sigprocmask
* system call is available to examine or change the signal mask
*/
/*#define HAS_STRFTIME / **/
+/* HAS_STRLCAT:
+ * This symbol, if defined, indicates that the strlcat () routine is
+ * available to do string concatenation.
+ */
+/*#define HAS_STRLCAT / **/
+
+/* HAS_STRLCPY:
+ * This symbol, if defined, indicates that the strlcpy () routine is
+ * available to do string copying.
+ */
+/*#define HAS_STRLCPY / **/
+
/* HAS_SYSCALL_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the syscall() function. Otherwise, it is up
*/
/*#define I_LANGINFO / **/
+/* USE_FAST_STDIO:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use 'fast stdio'.
+ * Defaults to define in Perls 5.8 and earlier, to undef later.
+ */
+#ifndef USE_FAST_STDIO
+/*#define USE_FAST_STDIO / **/
+#endif
+
+/* PERL_RELOCATABLE_INC:
+ * This symbol, if defined, indicates that we'd like to relocate entries
+ * in @INC at run time based on the location of the perl binary.
+ */
+#define PERL_RELOCATABLE_INC "" /**/
+
/* HAS_CTERMID_R:
* This symbol, if defined, indicates that the ctermid_r routine
* is available to ctermid re-entrantly.
/* HAS_PTHREAD_ATFORK:
* This symbol, if defined, indicates that the pthread_atfork routine
- * is available setup fork handlers.
+ * is available to setup fork handlers.
*/
/*#define HAS_PTHREAD_ATFORK / **/
https://perl5.git.perl.org / perl5.git / blobdiff