/* This is the stuff that used to live in regexp.h that was truly
private to the engine itself. It now lives here. */
-
-
typedef struct regexp_internal {
int name_list_idx; /* Optional data index of an array of paren names */
union {
#define PREGf_ANCH_MBOL 0x00000400
#define PREGf_ANCH_SBOL 0x00000800
#define PREGf_ANCH_GPOS 0x00001000
+#define PREGf_RECURSE_SEEN 0x00002000
#define PREGf_ANCH \
( PREGf_ANCH_SBOL | PREGf_ANCH_GPOS | PREGf_ANCH_MBOL )
#define REG_MAGIC 0234
-#define SIZE_ONLY (RExC_emit == (regnode *) & RExC_emit_dummy)
+#define SIZE_ONLY cBOOL(RExC_emit == (regnode *) & RExC_emit_dummy)
#define PASS1 SIZE_ONLY
#define PASS2 (! SIZE_ONLY)
-/* If the bitmap fully represents what this ANYOF node can match, the
- * ARG is set to this special value (since 0, 1, ... are legal, but will never
- * reach this high). */
+/* An ANYOF node is basically a bitmap with the index being a code point. If
+ * the bit for that code point is 1, the code point matches; if 0, it doesn't
+ * match (complemented if inverted). There is an additional mechanism to deal
+ * with cases where the bitmap is insufficient in and of itself. This #define
+ * indicates if the bitmap does fully represent what this ANYOF node can match.
+ * The ARG is set to this special value (since 0, 1, ... are legal, but will
+ * never reach this high). */
#define ANYOF_ONLY_HAS_BITMAP ((U32) -1)
-/* Flags for node->flags of ANYOF. These are in short supply, with none
- * currently available. The ABOVE_BITMAP_ALL bit could be freed up
- * by resorting to creating a swash containing everything above 255. This
- * introduces a performance penalty. An option that wouldn't slow things down
- * would be to split one of the two LOC flags out into a separate
- * node, like what was done with ANYOF_NON_UTF8_NON_ASCII_ALL in commit
- * 34fdef848b1687b91892ba55e9e0c3430e0770f6 (but which was reverted because it
- * wasn't the best option available at the time), and using a LOC flag is
- * probably better than that commit anyway. But it could be reinstated if we
- * need a bit. The LOC flags are only for /l nodes; the reverted commit was
- * only for /d, so there are no combinatorial issues. The LOC flag to use is
- * probably the POSIXL one. Now that there is an ANYOFL (locale) node, another
- * option would be to make all of those include the POSIXL data structure,
- * which would get rid of needing a separate POSIXL flag. But it would
- * increase the size of all such nodes, so it's probably not as atractive as
- * having an ANYOF_POSIXL node type. But if we did do it, note that not all 32
- * bits of that extra space are used, one bit of that could be set aside for
- * the LOC_FOLD flag, yielding yet another bit. This would require extra code
- * for masking, so again not the most attractive solution.
+/* When the bimap isn't completely sufficient for handling the ANYOF node,
+ * flags (in node->flags of the ANYOF node) get set to indicate this. These
+ * are perennially in short supply. Beyond several cases where warnings need
+ * to be raised under certain circumstances, currently, there are six cases
+ * where the bitmap alone isn't sufficient. We could use six flags to
+ * represent the 6 cases, but to save flags bits, we play some games. The
+ * cases are:
+ *
+ * 1) The bitmap has a compiled-in very finite size. So something else needs
+ * to be used to specify if a code point that is too large for the bitmap
+ * actually matches. The mechanism currently is a swash or inversion
+ * list. ANYOF_ONLY_HAS_BITMAP, described above, being TRUE indicates
+ * there are no matches of too-large code points. But if it is FALSE,
+ * then almost certainly there are matches too large for the bitmap. (The
+ * other cases, described below, either imply this one or are extremely
+ * rare in practice.) So we can just assume that a too-large code point
+ * will need something beyond the bitmap if ANYOF_ONLY_HAS_BITMAP is
+ * FALSE, instead of having a separate flag for this.
+ * 2) A subset of item 1) is if all possible code points outside the bitmap
+ * match. This is a common occurrence when the class is complemented,
+ * like /[^ij]/. Therefore a bit is reserved to indicate this,
+ * rather than having an expensive swash created,
+ * ANYOF_MATCHES_ALL_ABOVE_BITMAP.
+ * 3) Under /d rules, it can happen that code points that are in the upper
+ * latin1 range (\x80-\xFF or their equivalents on EBCDIC platforms) match
+ * only if the runtime target string being matched against is UTF-8. For
+ * example /[\w[:punct:]]/d. This happens only for posix classes (with a
+ * couple of exceptions, like \d where it doesn't happen), and all such
+ * ones also have above-bitmap matches. Thus, 3) implies 1) as well.
+ * Note that /d rules are no longer encouraged; 'use 5.14' or higher
+ * deselects them. But a flag is required so that they can be properly
+ * handled. But it can be a shared flag: see 5) below.
+ * 4) Also under /d rules, something like /[\Wfoo]/ will match everything in
+ * the \x80-\xFF range, unless the string being matched against is UTF-8.
+ * A swash could be created for this case, but this is relatively common,
+ * and it turns out that it's all or nothing: if any one of these code
+ * points matches, they all do. Hence a single bit suffices. We use a
+ * shared flag that doesn't take up space by itself:
+ * ANYOF_SHARED_d_MATCHES_ALL_NON_UTF8_NON_ASCII_non_d_WARN_SUPER.
+ * This also implies 1), with one exception: [:^cntrl:].
+ * 5) A user-defined \p{} property may not have been defined by the time the
+ * regex is compiled. In this case, we don't know until runtime what it
+ * will match, so we have to assume it could match anything, including
+ * code points that ordinarily would be in the bitmap. A flag bit is
+ * necessary to indicate this , though it can be shared with the item 3)
+ * flag, as that only occurs under /d, and this only occurs under non-d.
+ * This case is quite uncommon in the field, and the /(?[ ...])/ construct
+ * is a better way to accomplish what this feature does. This case also
+ * implies 1).
+ * ANYOF_SHARED_d_UPPER_LATIN1_UTF8_STRING_MATCHES_non_d_RUNTIME_USER_PROP
+ * is the shared flag.
+ * 6) /[foo]/il may have folds that are only valid if the runtime locale is a
+ * UTF-8 one. These are quite rare, so it would be good to avoid the
+ * expense of looking for them. But /l matching is slow anyway, and we've
+ * traditionally not worried too much about its performance. And this
+ * condition requires the ANYOFL_FOLD flag to be set, so testing for
+ * that flag would be sufficient to rule out most cases of this. So it is
+ * unclear if this should have a flag or not. But, this flag can be
+ * shared with another, so it doesn't occupy extra space.
+ *
+ * At the moment, there is one spare bit, but this could be increased by
+ * various tricks.
+ *
+ * If just one more bit is needed, at this writing it seems to khw that the
+ * best choice would be to make ANYOF_MATCHES_ALL_ABOVE_BITMAP not a flag, but
+ * something like
+ *
+ * #define ANYOF_MATCHES_ALL_ABOVE_BITMAP ((U32) -2)
+ *
+ * and access it through the ARG like ANYOF_ONLY_HAS_BITMAP is. This flag is
+ * used by all ANYOF node types, and it could be used to avoid calling the
+ * handler function, as the macro REGINCLASS in regexec.c does now for other
+ * cases.
*
- * Several flags are not used in synthetic start class (SSC) nodes, so could be
+ * Another possibility is to instead (or additionally) rename the ANYOF_POSIXL
+ * flag to be ANYOFL_LARGE, to mean that the ANYOF node has an extra 32 bits
+ * beyond what a regular one does. That's what it effectively means now, with
+ * the extra space all for the POSIX class flags. But those classes actually
+ * only occupy 30 bits, so the ANYOFL_FOLD and
+ * ANYOFL_SHARED_UTF8_LOCALE_fold_HAS_MATCHES_nonfold_REQD flags could be moved
+ * to that extra space. The 30 bits in the extra word would indicate if a
+ * posix class should be looked up or not. The downside of this is that ANYOFL
+ * nodes with folding would always have to have the extra space allocated, even
+ * if they didn't use the 30 posix bits. There isn't an SSC problem as all
+ * SSCs are this large anyway.
+ *
+ * One could completely remove ANYOFL_LARGE and make all ANYOFL nodes large.
+ * REGINCLASS would have to be modified so that if the node type were this, it
+ * would call reginclass(), as the flag bit that indicates to do this now would
+ * be gone.
+ *
+ * All told, 5 bits could be available for other uses if all of the above were
+ * done.
+ *
+ * Some flags are not used in synthetic start class (SSC) nodes, so could be
* shared should new flags be needed for SSCs, like SSC_MATCHES_EMPTY_STRING
* now. */
-/* regexec.c is expecting this to be in the low bit */
+/* If this is set, the result of the match should be complemented. regexec.c
+ * is expecting this to be in the low bit. Never in an SSC */
#define ANYOF_INVERT 0x01
/* For the SSC node only, which cannot be inverted, so is shared with that bit.
/* The fold is calculated and stored in the bitmap where possible at compile
* time. However under locale, the actual folding varies depending on
* what the locale is at the time of execution, so it has to be deferred until
- * then */
-#define ANYOF_LOC_FOLD 0x04
-
-/* If set, means to warn if runtime locale isn't a UTF-8 one. Only under /l.
- * If set, none of INVERT, LOC_FOLD, POSIXL, HAS_NONBITMAP_NON_UTF8_MATCHES can
- * be set. Can be in an SSC */
-#define ANYOF_LOC_REQ_UTF8 0x08
+ * then. Only set under /l; never in an SSC */
+#define ANYOFL_FOLD 0x04
+
+/* Shared bit set only with ANYOFL and SSC nodes:
+ * If ANYOFL_FOLD is set, this means there are potential matches valid
+ * only if the locale is a UTF-8 one.
+ * If ANYOFL_FOLD is NOT set, this means to warn if the runtime locale
+ * isn't a UTF-8 one (and the generated node assumes a UTF-8 locale).
+ * None of INVERT, POSIXL,
+ * ANYOF_SHARED_d_UPPER_LATIN1_UTF8_STRING_MATCHES_non_d_RUNTIME_USER_PROP
+ * can be set. */
+#define ANYOFL_SHARED_UTF8_LOCALE_fold_HAS_MATCHES_nonfold_REQD 0x08
+
+/* Convenience macros for teasing apart the meanings when reading the above bit
+ * */
+#define ANYOFL_SOME_FOLDS_ONLY_IN_UTF8_LOCALE(flags) \
+ ((flags & ( ANYOFL_FOLD /* Both bits are set */ \
+ |ANYOFL_SHARED_UTF8_LOCALE_fold_HAS_MATCHES_nonfold_REQD)) \
+ == ( ANYOFL_FOLD \
+ |ANYOFL_SHARED_UTF8_LOCALE_fold_HAS_MATCHES_nonfold_REQD))
+
+#define ANYOFL_UTF8_LOCALE_REQD(flags) \
+ ((flags & ( ANYOFL_FOLD /* Only REQD bit is set */ \
+ |ANYOFL_SHARED_UTF8_LOCALE_fold_HAS_MATCHES_nonfold_REQD)) \
+ == ANYOFL_SHARED_UTF8_LOCALE_fold_HAS_MATCHES_nonfold_REQD)
+
+/* Spare: Be sure to change ANYOF_FLAGS_ALL if this gets used 0x10 */
/* If set, the node matches every code point NUM_ANYOF_CODE_POINTS and above.
* Can be in an SSC */
-#define ANYOF_MATCHES_ALL_ABOVE_BITMAP 0x10
+#define ANYOF_MATCHES_ALL_ABOVE_BITMAP 0x20
-/* Can match something outside the bitmap that isn't in utf8 */
-#define ANYOF_HAS_NONBITMAP_NON_UTF8_MATCHES 0x20
-
-/* Are there things outside the bitmap that will match only if the target
- * string is encoded in UTF-8? (This is not set if ANYOF_ABOVE_BITMAP_ALL is
- * set). Can be in SSC */
-#define ANYOF_HAS_UTF8_NONBITMAP_MATCHES 0x40
+/* Shared bit:
+ * Under /d it means the ANYOFD node matches more things if the target
+ * string is encoded in UTF-8; any such things will be non-ASCII,
+ * characters that are < 256, and can be accessed via the swash.
+ * When not under /d, it means the ANYOF node contains a user-defined
+ * property that wasn't yet defined at the time the regex was compiled,
+ * and so must be looked up at runtime, by creating a swash
+ * (These uses are mutually exclusive because a user-defined property is
+ * specified by \p{}, and \p{} implies /u which deselects /d). The long macro
+ * name is to make sure that you are cautioned about its shared nature. Only
+ * the non-/d meaning can be in an SSC */
+#define ANYOF_SHARED_d_UPPER_LATIN1_UTF8_STRING_MATCHES_non_d_RUNTIME_USER_PROP 0x40
/* Shared bit:
- * Under /d it means the ANYOF node matches all non-ASCII Latin1
+ * Under /d it means the ANYOFD node matches all non-ASCII Latin1
* characters when the target string is not in utf8.
* When not under /d, it means the ANYOF node should raise a warning if
* matching against an above-Unicode code point.
* are cautioned about its shared nature */
#define ANYOF_SHARED_d_MATCHES_ALL_NON_UTF8_NON_ASCII_non_d_WARN_SUPER 0x80
-#define ANYOF_FLAGS_ALL (0xff)
+#define ANYOF_FLAGS_ALL (0xff & ~0x10)
-#define ANYOF_LOCALE_FLAGS (ANYOF_LOC_FOLD | ANYOF_MATCHES_POSIXL)
+#define ANYOF_LOCALE_FLAGS (ANYOFL_FOLD | ANYOF_MATCHES_POSIXL)
/* These are the flags that apply to both regular ANYOF nodes and synthetic
* start class nodes during construction of the SSC. During finalization of
- * the SSC, other of the flags could be added to it */
-#define ANYOF_COMMON_FLAGS ( ANYOF_HAS_UTF8_NONBITMAP_MATCHES \
- |ANYOF_LOC_REQ_UTF8)
+ * the SSC, other of the flags may get added to it */
+#define ANYOF_COMMON_FLAGS 0
/* Character classes for node->classflags of ANYOF */
/* Should be synchronized with a table in regprop() */
#define ANYOF_POSIXL_AND(source, dest) STMT_START { (dest)->classflags &= (source)->classflags ; } STMT_END
-#define ANYOF_BITMAP_ZERO(ret) Zero(((struct regnode_charclass*)(ret))->bitmap, ANYOF_BITMAP_SIZE, char)
-#define ANYOF_BITMAP(p) (((struct regnode_charclass*)(p))->bitmap)
-#define ANYOF_BITMAP_BYTE(p, c) (ANYOF_BITMAP(p)[(((U8)(c)) >> 3) & 31])
+#define ANYOF_BITMAP_ZERO(ret) Zero(((regnode_charclass*)(ret))->bitmap, ANYOF_BITMAP_SIZE, char)
+#define ANYOF_BITMAP(p) ((regnode_charclass*)(p))->bitmap
+#define ANYOF_BITMAP_BYTE(p, c) BITMAP_BYTE(ANYOF_BITMAP(p), c)
#define ANYOF_BITMAP_SET(p, c) (ANYOF_BITMAP_BYTE(p, c) |= ANYOF_BIT(c))
#define ANYOF_BITMAP_CLEAR(p,c) (ANYOF_BITMAP_BYTE(p, c) &= ~ANYOF_BIT(c))
#define ANYOF_BITMAP_TEST(p, c) cBOOL(ANYOF_BITMAP_BYTE(p, c) & ANYOF_BIT(c))
#define ANYOF_BITMAP_CLEARALL(p) \
Zero (ANYOF_BITMAP(p), ANYOF_BITMAP_SIZE)
-#define ANYOF_SKIP EXTRA_SIZE(struct regnode_charclass)
+#define ANYOF_SKIP EXTRA_SIZE(regnode_charclass)
#define ANYOF_POSIXL_SKIP EXTRA_SIZE(regnode_charclass_posixl)
/*
#define REG_CUTGROUP_SEEN 0x00000100
#define REG_RUN_ON_COMMENT_SEEN 0x00000200
#define REG_UNFOLDED_MULTI_SEEN 0x00000400
-#define REG_GOSTART_SEEN 0x00000800
+/* spare */
#define REG_UNBOUNDED_QUANTIFIER_SEEN 0x00001000
three different sets... */
#define TRIE_BITMAP(p) (((reg_trie_data *)(p))->bitmap)
-#define TRIE_BITMAP_BYTE(p, c) (TRIE_BITMAP(p)[(((U8)(c)) >> 3) & 31])
+#define TRIE_BITMAP_BYTE(p, c) BITMAP_BYTE(TRIE_BITMAP(p), c)
#define TRIE_BITMAP_SET(p, c) (TRIE_BITMAP_BYTE(p, c) |= ANYOF_BIT((U8)c))
#define TRIE_BITMAP_CLEAR(p,c) (TRIE_BITMAP_BYTE(p, c) &= ~ANYOF_BIT((U8)c))
#define TRIE_BITMAP_TEST(p, c) (TRIE_BITMAP_BYTE(p, c) & ANYOF_BIT((U8)c))
#define IS_TRIE_AC(op) ((op)>=AHOCORASICK)
-#define BITMAP_BYTE(p, c) (((U8*)p)[(((U8)(c)) >> 3) & 31])
+#define BITMAP_BYTE(p, c) (( (U8*) p) [ ( ( (UV) (c)) >> 3) ] )
#define BITMAP_TEST(p, c) (BITMAP_BYTE(p, c) & ANYOF_BIT((U8)c))
/* these defines assume uniquecharcount is the correct variable, and state may be evaluated twice */
/* get_sv() can return NULL during global destruction. */
#define GET_RE_DEBUG_FLAGS DEBUG_r({ \
SV * re_debug_flags_sv = NULL; \
- re_debug_flags_sv = get_sv(RE_DEBUG_FLAGS, 1); \
+ re_debug_flags_sv = PL_curcop ? get_sv(RE_DEBUG_FLAGS, GV_ADD) : NULL; \
if (re_debug_flags_sv) { \
if (!SvIOK(re_debug_flags_sv)) \
sv_setuv(re_debug_flags_sv, RE_DEBUG_COMPILE_DUMP | RE_DEBUG_EXECUTE_MASK ); \
PERL_UNUSED_VAR(re_debug_flags); GET_RE_DEBUG_FLAGS;
#define RE_PV_COLOR_DECL(rpv,rlen,isuni,dsv,pv,l,m,c1,c2) \
- const char * const rpv = \
- pv_pretty((dsv), (pv), (l), (m), \
- PL_colors[(c1)],PL_colors[(c2)], \
+ const char * const rpv = \
+ pv_pretty((dsv), (pv), (l), \
+ (PL_dump_re_max_len) ? PL_dump_re_max_len : (m), \
+ PL_colors[(c1)],PL_colors[(c2)], \
PERL_PV_ESCAPE_RE|PERL_PV_ESCAPE_NONASCII |((isuni) ? PERL_PV_ESCAPE_UNI : 0) ); \
const int rlen = SvCUR(dsv)
-#define RE_SV_ESCAPE(rpv,isuni,dsv,sv,m) \
- const char * const rpv = \
- pv_pretty((dsv), (SvPV_nolen_const(sv)), (SvCUR(sv)), (m), \
- PL_colors[(c1)],PL_colors[(c2)], \
+#define RE_SV_ESCAPE(rpv,isuni,dsv,sv,m) \
+ const char * const rpv = \
+ pv_pretty((dsv), (SvPV_nolen_const(sv)), (SvCUR(sv)), \
+ (PL_dump_re_max_len) ? PL_dump_re_max_len : (m), \
+ PL_colors[(c1)],PL_colors[(c2)], \
PERL_PV_ESCAPE_RE|PERL_PV_ESCAPE_NONASCII |((isuni) ? PERL_PV_ESCAPE_UNI : 0) )
#define RE_PV_QUOTED_DECL(rpv,isuni,dsv,pv,l,m) \
const char * const rpv = \
- pv_pretty((dsv), (pv), (l), (m), \
- PL_colors[0], PL_colors[1], \
+ pv_pretty((dsv), (pv), (l), \
+ (PL_dump_re_max_len) ? PL_dump_re_max_len : (m), \
+ PL_colors[0], PL_colors[1], \
( PERL_PV_PRETTY_QUOTE | PERL_PV_ESCAPE_RE | PERL_PV_ESCAPE_NONASCII | PERL_PV_PRETTY_ELLIPSES | \
((isuni) ? PERL_PV_ESCAPE_UNI : 0)) \
)
typedef enum {
TRADITIONAL_BOUND = _CC_WORDCHAR,
GCB_BOUND,
+ LB_BOUND,
SB_BOUND,
WB_BOUND
} bound_type;
https://perl5.git.perl.org / perl5.git / blobdiff