-# Makefile to build perl on Windowns NT using Microsoft NMAKE.
-# Works with MS command line compilers from VC++ etc.
+#
+# Makefile to build perl on Windows NT using Microsoft NMAKE.
#
# This is set up to build a perl.exe that runs off a shared library
# (perl.dll). Also makes individual DLLs for the XS extensions.
-# NB: Miniperl has a different set of objects it depends on than
-# perl.exe
-# Also, Miniperl will not build with -DPERL_OBJECT defined
+#
+
+##
+## Build configuration. Edit the values below to suit your needs.
+##
+
#
# Set these to wherever you want "nmake install" to put your
# newly built perl.
+#
INST_DRV = c:
INST_TOP = $(INST_DRV)\perl
+#
# Comment this out if you DON'T want your perl installation to be versioned.
# This means that the new installation will overwrite any files from the
# old installation at the same INST_TOP location. Leaving it enabled is
# locations it installs files to. If you disable it, an alternative
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
-INST_VER = \5.00467
+#
+INST_VER = \5.00475
#
# uncomment to enable threads-capabilities
+#
#USE_THREADS = define
#
# uncomment next line if you are using Visual C++ 2.x
+#
#CCTYPE = MSVC20
#
# uncomment next line if you want to use the perl object
# Currently, this cannot be enabled if you ask for threads above
+#
#OBJECT = -DPERL_OBJECT
#
# uncomment next line if you want debug version of perl (big,slow)
+#
#CFG = Debug
#
+# uncomment to enable use of PerlCRT.DLL. Highly recommended. It has
+# patches that fix known bugs in MSCVRT.DLL. You will need to download it
+# from: <TBD> and follow the directions in the package to install.
+#
+#USE_PERLCRT = define
+
+#
+# uncomment to enable linking with setargv.obj under the Visual C
+# compiler. Setting this options enables perl to expand wildcards in
+# arguments, but it may be harder to use alternate methods like
+# File::DosGlob that are more powerful. This option is supported only with
+# Visual C.
+#
+#USE_SETARGV = define
+
+#
# if you have the source for des_fcrypt(), uncomment this and make sure the
-# file exists (see README.win32). File should be located at the perl
-# top level directory.
+# file exists (see README.win32). File should be located in the same
+# directory as this file. Not (yet) supported with PERL_OBJECT.
+#
#CRYPT_SRC = des_fcrypt.c
#
# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
# library, uncomment this, and make sure the library exists (see README.win32)
# Specify the full pathname of the library.
+#
#CRYPT_LIB = des_fcrypt.lib
#
# set this if you wish to use perl's malloc
# WARNING: Turning this on/off WILL break binary compatibility with extensions
-# you may have compiled with/without it. Be prepared to recompile all extensions
-# if you change the default. Currently, this cannot be enabled if you ask for
-# PERL_OBJECT above.
+# you may have compiled with/without it. Be prepared to recompile all
+# extensions if you change the default. Currently, this cannot be enabled
+# if you ask for PERL_OBJECT above.
+#
#PERL_MALLOC = define
#
CCLIBDIR = $(CCHOME)\lib
#
+# specify space-separated list of extra directories to look for libraries
+#
+EXTRALIBDIRS =
+
+#
# set this to your email address (perl will guess a value from
# from your loginname and your hostname, which may not be right)
+#
#EMAIL =
+##
+## Build configuration ends.
+##
+
##################### CHANGE THESE ONLY IF YOU MUST #####################
!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
PROCESSOR_ARCHITECTURE = x86
!ENDIF
+!IF "$(OBJECT)" != ""
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object
+!ELSE
!IF "$(USE_THREADS)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
!ELSE
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
!ENDIF
+!ENDIF
ARCHDIR = ..\lib\$(ARCHNAME)
COREDIR = ..\lib\CORE
#
RUNTIME = -MD
-INCLUDES = -I.\include -I. -I..
+INCLUDES = -I$(COREDIR) -I.\include -I. -I..
#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
-DEFINES = -DWIN32 -D_CONSOLE $(BUILDOPT) $(CRYPT_FLAG)
+DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(BUILDOPT) $(CRYPT_FLAG)
LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
CXX_FLAG = -TP -GX
+!IF "$(USE_PERLCRT)" == ""
+! IF "$(CFG)" == "Debug"
+PERLCRTLIBC = msvcrtd.lib
+! ELSE
+PERLCRTLIBC = msvcrt.lib
+! ENDIF
+!ELSE
+! IF "$(CFG)" == "Debug"
+PERLCRTLIBC = PerlCRTD.lib
+! ELSE
+PERLCRTLIBC = PerlCRT.lib
+! ENDIF
+!ENDIF
+
!IF "$(RUNTIME)" == "-MD"
-LIBC = msvcrt.lib
+LIBC = $(PERLCRTLIBC)
!ELSE
LIBC = libcmt.lib
!ENDIF
OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG)
!ENDIF
-# we don't add LIBC here, the compiler does it based on -MD/-MT
-LIBFILES = $(CRYPT_LIB) oldnames.lib kernel32.lib user32.lib gdi32.lib \
+LIBBASEFILES = $(CRYPT_LIB) oldnames.lib kernel32.lib user32.lib gdi32.lib \
winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib \
oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
version.lib odbc32.lib odbccp32.lib
+# we add LIBC here, since we may be using PerlCRT.dll
+LIBFILES = $(LIBBASEFILES) $(LIBC)
+
CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
$(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = -nologo $(LINK_DBG) -machine:$(PROCESSOR_ARCHITECTURE)
+LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) -machine:$(PROCESSOR_ARCHITECTURE)
OBJOUT_FLAG = -Fo
EXEOUT_FLAG = -Fe
CFGSH_TMPL = config.vc
CFGH_TMPL = config_H.vc
+
+!IF "$(USE_PERLCRT)" == ""
PERL95EXE = ..\perl95.exe
+!ENDIF
XCOPY = xcopy /f /r /i /d
RCOPY = xcopy /f /r /i /e /d
..\universal.c \
..\util.c
-!IF "$(CRYPT_SRC)" != ""
-MICROCORE_SRC = $(MICROCORE_SRC) ..\$(CRYPT_SRC)
-!ENDIF
-
!IF "$(PERL_MALLOC)" == "define"
EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
!ENDIF
WIN32_SRC = $(WIN32_SRC) .\win32thread.c
!ENDIF
+!IF "$(CRYPT_SRC)" != ""
+WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
+!ENDIF
+
PERL95_SRC = \
perl95.c \
win32mt.c \
win32sckmt.c
!IF "$(CRYPT_SRC)" != ""
-PERL95_SRC = $(PERL95_SRC) ..\$(CRYPT_SRC)
+PERL95_SRC = $(PERL95_SRC) .\$(CRYPT_SRC)
!ENDIF
DLL_SRC = $(DYNALOADER).c
..\gv.h \
..\handy.h \
..\hv.h \
+ ..\iperlsys.h \
..\mg.h \
..\nostdio.h \
..\op.h \
..\opcode.h \
..\perl.h \
- ..\perlio.h \
..\perlsdio.h \
..\perlsfio.h \
..\perly.h \
PERL95_OBJ = $(PERL95_OBJ) DynaLoadmt$(o)
!ENDIF
-DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B
+!IF "$(USE_SETARGV)" != ""
+SETARGV_OBJ = setargv$(o)
+!ENDIF
+
+DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
+ Data/Dumper
STATIC_EXT = DynaLoader
+NONXS_EXT = Errno
DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
SOCKET = $(EXTDIR)\Socket\Socket
ATTRS = $(EXTDIR)\attrs\attrs
THREAD = $(EXTDIR)\Thread\Thread
B = $(EXTDIR)\B\B
+RE = $(EXTDIR)\re\re
+DUMPER = $(EXTDIR)\Data\Dumper\Dumper
+ERRNO = $(EXTDIR)\Errno\Errno
SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
B_DLL = $(AUTODIR)\B\B.dll
+DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
+RE_DLL = $(AUTODIR)\re\re.dll
+
+ERRNO_PM = $(LIBDIR)\Errno.pm
EXTENSION_C = \
$(SOCKET).c \
$(POSIX).c \
$(ATTRS).c \
$(THREAD).c \
+ $(RE).c \
+ $(DUMPER).c \
$(B).c
EXTENSION_DLL = \
$(IO_DLL) \
$(POSIX_DLL) \
$(ATTRS_DLL) \
+ $(DUMPER_DLL) \
$(B_DLL)
+EXTENSION_PM = \
+ $(ERRNO_PM)
+
!IF "$(OBJECT)" == ""
EXTENSION_DLL = \
$(EXTENSION_DLL)\
- $(THREAD_DLL)
+ $(THREAD_DLL) \
+ $(RE_DLL)
!ENDIF
POD2HTML = $(PODDIR)\pod2html
"d_mymalloc=$(PERL_MALLOC)" \
"libs=$(LIBFILES)" \
"incpath=$(CCINCDIR)" \
- "libperl=$(PERLIMPLIB)" \
- "libpth=$(CCLIBDIR)" \
+ "libperl=$(PERLIMPLIB:..\=)" \
+ "libpth=$(CCLIBDIR) $(EXTRALIBDIRS)" \
"libc=$(LIBC)" \
"make=nmake" \
"static_ext=$(STATIC_EXT)" \
"dynamic_ext=$(DYNAMIC_EXT)" \
+ "nonxs_ext=$(NONXS_EXT)" \
"usethreads=$(USE_THREADS)" \
"LINK_FLAGS=$(LINK_FLAGS)" \
"optimize=$(OPTIMIZE)"
#
all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) $(PERL95EXE) \
- $(CAPILIB) $(X2P) $(EXTENSION_DLL)
+ $(CAPILIB) $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)
$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
$(XCOPY) ..\*.h $(COREDIR)\*.*
$(XCOPY) *.h $(COREDIR)\*.*
+ $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
$(RCOPY) include $(COREDIR)\*.*
$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
|| $(MAKE) $(MAKEFLAGS) $(CONFIGPM)
$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ)
$(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) $(LIBFILES) \
- $(PERLEXE_OBJ) $(PERLIMPLIB)
+ $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB)
copy splittree.pl ..
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
+!IF "$(USE_PERLCRT)" == ""
+
perl95.c : runperl.c
copy runperl.c perl95.c
$(PERL95EXE): $(PERLDLL) $(CONFIGPM) $(PERL95_OBJ)
$(LINK32) -subsystem:console -nodefaultlib -out:$@ $(LINK_FLAGS) \
- $(LIBFILES) $(PERL95_OBJ) $(PERLIMPLIB) libcmt.lib
+ $(LIBBASEFILES) $(PERL95_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) \
+ libcmt.lib
+
+!ENDIF
$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
if not exist $(AUTODIR) mkdir $(AUTODIR)
$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
+$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
+ cd $(EXTDIR)\Data\$(*B)
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\..\win32
+
+$(RE_DLL): $(PERLEXE) $(RE).xs
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
$(B_DLL): $(PERLEXE) $(B).xs
cd $(EXTDIR)\$(*B)
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
$(MAKE)
cd ..\..\win32
+$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
doc: $(PERLEXE)
copy ..\README.win32 ..\pod\perlwin32.pod
$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
-del /f $(MINIPERL) $(PERLEXE) $(PERL95EXE) $(PERLDLL) $(GLOBEXE) \
$(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
-del /f *.def *.map
- -del /f $(EXTENSION_DLL)
- -del /f $(EXTENSION_C) $(DYNALOADER).c
+ -del /f $(EXTENSION_DLL) $(EXTENSION_PM)
+ -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
- -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm
+ -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
+ -del /f $(LIBDIR)\Data\Dumper.pm
-rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
-rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
-rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
+ -rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
-del /f $(PODDIR)\*.html
-del /f $(PODDIR)\*.bat
cd ..\utils
installbare : utils
$(PERLEXE) ..\installperl
+!IF "$(USE_PERLCRT)" == ""
$(XCOPY) $(PERL95EXE) $(INST_BIN)\*.*
+!ENDIF
$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
$(XCOPY) bin\network.pl $(INST_LIB)\*.*
https://perl5.git.perl.org / perl5.git / blobdiff