design deficiencies, and nowadays, there is a series of "UTF-8
locales", based on Unicode. These are locales whose character set is
Unicode, encoded in UTF-8. Starting in v5.20, Perl fully supports
-UTF-8 locales, except for sorting and string comparisions. (Use
+UTF-8 locales, except for sorting and string comparisons. (Use
L<Unicode::Collate> for these.) Perl continues to support the old
-non UTF-8 locales as well.
+non UTF-8 locales as well. There are currently no UTF-8 locales for
+EBCDIC platforms.
(Unicode is also creating C<CLDR>, the "Common Locale Data Repository",
L<http://cldr.unicode.org/> which includes more types of information than
=over
-=item Category LC_NUMERIC: Numeric formatting
+=item Category C<LC_NUMERIC>: Numeric formatting
This indicates how numbers should be formatted for human readability,
for example the character used as the decimal point.
-=item Category LC_MONETARY: Formatting of monetary amounts
+=item Category C<LC_MONETARY>: Formatting of monetary amounts
=for comment
The nbsp below makes this look better (though not great)
E<160>
-=item Category LC_TIME: Date/Time formatting
+=item Category C<LC_TIME>: Date/Time formatting
=for comment
The nbsp below makes this look better (though not great)
E<160>
-=item Category LC_MESSAGES: Error and other messages
+=item Category C<LC_MESSAGES>: Error and other messages
This is used by Perl itself only for accessing operating system error
messages via L<$!|perlvar/$ERRNO> and L<$^E|perlvar/$EXTENDED_OS_ERROR>.
-=item Category LC_COLLATE: Collation
+=item Category C<LC_COLLATE>: Collation
This indicates the ordering of letters for comparison and sorting.
In Latin alphabets, for example, "b", generally follows "a".
-=item Category LC_CTYPE: Character Types
+=item Category C<LC_CTYPE>: Character Types
This indicates, for example if a character is an uppercase letter.
Some platforms have other categories, dealing with such things as
measurement units and paper sizes. None of these are used directly by
Perl, but outside operations that Perl interacts with may use
-these. See L</Not within the scope of any "use locale" variant> below.
+these. See L</Not within the scope of "use locale"> below.
=back
=head1 PREPARING TO USE LOCALES
-Perl itself will not use locales unless specifically requested to (but
+Perl itself (outside the L<POSIX> module) will not use locales unless
+specifically requested to (but
again note that Perl may interact with code that does use them). Even
if there is such a request, B<all> of the following must be true
for it to work properly:
If you want a Perl application to process and present your data
according to a particular locale, the application code should include
-the S<C<use locale>> pragma (see L<The use locale pragma>) where
+the S<C<use locale>> pragma (see L<The "use locale" pragma>) where
appropriate, and B<at least one> of the following must be true:
=over 4
=head1 USING LOCALES
-=head2 The use locale pragma
+=head2 The C<"use locale"> pragma
-By default, Perl itself ignores the current locale. The S<C<use locale>>
+By default, Perl itself (outside the L<POSIX> module)
+ignores the current locale. The S<C<use locale>>
pragma tells Perl to use the current locale for some operations.
-Starting in v5.16, there is an optional parameter to this pragma:
-
- use locale ':not_characters';
-
-This parameter allows better mixing of locales and Unicode (less useful
-in v5.20 and later), and is
-described fully in L</Unicode and UTF-8>, but briefly, it tells Perl to
-not use the character portions of the locale definition, that is
-the C<LC_CTYPE> and C<LC_COLLATE> categories. Instead it will use the
-native character set (extended by Unicode). When using this parameter,
-you are responsible for getting the external character set translated
-into the native/Unicode one (which it already will be if it is one of
-the increasingly popular UTF-8 locales). There are convenient ways of
-doing this, as described in L</Unicode and UTF-8>.
+Starting in v5.16, there are optional parameters to this pragma,
+described below, which restrict which operations are affected by it.
The current locale is set at execution time by
L<setlocale()|/The setlocale function> described below. If that function
=over 4
-=item B<Not within the scope of any C<"use locale"> variant>
+=item B<Not within the scope of C<"use locale">>
-Only operations originating outside Perl should be affected, as follows:
+Only certain operations originating outside Perl should be affected, as
+follows:
=over 4
=item *
-The variables L<$!|perlvar/$ERRNO> (and its synonyms C<$ERRNO> and
-C<$OS_ERROR>) and L<$^E|perlvar/$EXTENDED_OS_ERROR> (and its synonym
-C<$EXTENDED_OS_ERROR>) when used as strings always are in terms of the
-current locale and as if within the scope of L<"use bytes"|bytes>. This is
-likely to change in Perl v5.22.
-
-=item *
-
-The current locale is also used when going outside of Perl with
+The current locale is used when going outside of Perl with
operations like L<system()|perlfunc/system LIST> or
L<qxE<sol>E<sol>|perlop/qxE<sol>STRINGE<sol>>, if those operations are
locale-sensitive.
XS modules for all categories but C<LC_NUMERIC> get the underlying
locale, and hence any C library functions they call will use that
-underlying locale. Perl always initializes C<LC_NUMERIC> to C<"C">
-because too many modules are unable to cope with the decimal point in a
-floating point number not being a dot (it's a comma in many locales).
-But note that these modules are vulnerable because C<LC_NUMERIC>
-currently can be changed at any time by a call to the C C<set_locale()>
-by XS code or by something XS code calls, or by C<POSIX::setlocale()> by
-Perl code. This is true also for the Perl-provided lite wrappers for XS
-modules to use some C library C<printf> functions:
-C<Gconvert>,
-L<my_sprintf|perlapi/my_sprintf>,
-L<my_snprintf|perlapi/my_snprintf>,
-and
-L<my_vsnprintf|perlapi/my_vsnprintf>.
+underlying locale. For more discussion, see L<perlxs/CAVEATS>.
=back
+Note that all C programs (including the perl interpreter, which is
+written in C) always have an underlying locale. That locale is the "C"
+locale unless changed by a call to L<setlocale()|/The setlocale
+function>. When Perl starts up, it changes the underlying locale to the
+one which is indicated by the L</ENVIRONMENT>. When using the L<POSIX>
+module or writing XS code, it is important to keep in mind that the
+underlying locale may be something other than "C", even if the program
+hasn't explicitly changed it.
+
=for comment
The nbsp below makes this look better (though not great)
=item B<Lingering effects of C<S<use locale>>>
Certain Perl operations that are set-up within the scope of a
-C<use locale> variant retain that effect even outside the scope.
+C<use locale> retain that effect even outside the scope.
These include:
=over 4
The output format of a L<write()|perlfunc/write> is determined by an
earlier format declaration (L<perlfunc/format>), so whether or not the
output is affected by locale is determined by if the C<format()> is
-within the scope of a C<use locale> variant, not whether the C<write()>
+within the scope of a C<use locale>, not whether the C<write()>
is.
=item *
Regular expression patterns can be compiled using
-L<qrE<sol>E<sol>|perlop/qrE<sol>STRINGE<sol>msixpodual> with actual
+L<qrE<sol>E<sol>|perlop/qrE<sol>STRINGE<sol>msixpodualn> with actual
matching deferred to later. Again, it is whether or not the compilation
was done within the scope of C<use locale> that determines the match
behavior, not if the matches are done within such a scope or not.
=for comment
The nbsp below makes this look better (though not great)
+
E<160>
-=item B<Under C<"use locale ':not_characters';">>
+=item B<Under C<"use locale";>>
=over 4
=item *
-All the non-Perl operations.
+All the above operations
=item *
and
C<sprintf()>.
-=back
-
-=for comment
-The nbsp below makes this look better (though not great)
-
-E<160>
-
-=item B<Under just plain C<"use locale";>>
-
-=over 4
-
-=item *
-
-All the above operations
-
=item *
B<The comparison operators> (C<lt>, C<le>, C<cmp>, C<ge>, and C<gt>) use
operands are char-for-char identical. If you really want to know whether
two strings--which C<eq> and C<cmp> may consider different--are equal
as far as collation in the locale is concerned, see the discussion in
-L<Category LC_COLLATE: Collation>.
+L<Category C<LC_COLLATE>: Collation>.
=item *
B<Regular expressions and case-modification functions> (C<uc()>, C<lc()>,
C<ucfirst()>, and C<lcfirst()>) use C<LC_CTYPE>
+=item *
+
+B<The variables L<$!|perlvar/$ERRNO>> (and its synonyms C<$ERRNO> and
+C<$OS_ERROR>) B<and L<$^E|perlvar/$EXTENDED_OS_ERROR>> (and its synonym
+C<$EXTENDED_OS_ERROR>) when used as strings use C<LC_MESSAGES>.
+
=back
=back
The default behavior is restored with the S<C<no locale>> pragma, or
upon reaching the end of the block enclosing C<use locale>.
-Note that C<use locale> and C<use locale ':not_characters'> may be
+Note that C<use locale> calls may be
nested, and that what is in effect within an inner scope will revert to
the outer scope's rules at the end of the inner scope.
information is tainted, as it is possible for a locale to be
untrustworthy. See L<"SECURITY">.
+Starting in Perl v5.16 in a very limited way, and more generally in
+v5.22, you can restrict which category or categories are enabled by this
+particular instance of the pragma by adding parameters to it. For
+example,
+
+ use locale qw(:ctype :numeric);
+
+enables locale awareness within its scope of only those operations
+(listed above) that are affected by C<LC_CTYPE> and C<LC_NUMERIC>.
+
+The possible categories are: C<:collate>, C<:ctype>, C<:messages>,
+C<:monetary>, C<:numeric>, C<:time>, and the pseudo category
+C<:characters> (described below).
+
+Thus you can say
+
+ use locale ':messages';
+
+and only L<$!|perlvar/$ERRNO> and L<$^E|perlvar/$EXTENDED_OS_ERROR>
+will be locale aware. Everything else is unaffected.
+
+Since Perl doesn't currently do anything with the C<LC_MONETARY>
+category, specifying C<:monetary> does effectively nothing. Some
+systems have other categories, such as C<LC_PAPER_SIZE>, but Perl
+also doesn't know anything about them, and there is no way to specify
+them in this pragma's arguments.
+
+You can also easily say to use all categories but one, by either, for
+example,
+
+ use locale ':!ctype';
+ use locale ':not_ctype';
+
+both of which mean to enable locale awarness of all categories but
+C<LC_CTYPE>. Only one category argument may be specified in a
+S<C<use locale>> if it is of the negated form.
+
+Prior to v5.22 only one form of the pragma with arguments is available:
+
+ use locale ':not_characters';
+
+(and you have to say C<not_>; you can't use the bang C<!> form). This
+pseudo category is a shorthand for specifying both C<:collate> and
+C<:ctype>. Hence, in the negated form, it is nearly the same thing as
+saying
+
+ use locale qw(:messages :monetary :numeric :time);
+
+We use the term "nearly", because C<:not_characters> also turns on
+S<C<use feature 'unicode_strings'>> within its scope. This form is
+less useful in v5.20 and later, and is described fully in
+L</Unicode and UTF-8>, but briefly, it tells Perl to not use the
+character portions of the locale definition, that is the C<LC_CTYPE> and
+C<LC_COLLATE> categories. Instead it will use the native character set
+(extended by Unicode). When using this parameter, you are responsible
+for getting the external character set translated into the
+native/Unicode one (which it already will be if it is one of the
+increasingly popular UTF-8 locales). There are convenient ways of doing
+this, as described in L</Unicode and UTF-8>.
+
=head2 The setlocale function
You can switch locales as often as you wish at run time with the
# restore the old locale
setlocale(LC_CTYPE, $old_locale);
+This simultaneously affects all threads of the program, so it may be
+problematic to use locales in threaded applications except where there
+is a single locale applicable to all threads.
+
The first argument of C<setlocale()> gives the B<category>, the second the
B<locale>. The category tells in what aspect of data processing you
want to apply locale-specific rules. Category names are discussed in
example.
If no second argument is provided and the category is something other
-than LC_ALL, the function returns a string naming the current locale
+than C<LC_ALL>, the function returns a string naming the current locale
for the category. You can use this value as the second argument in a
subsequent call to C<setlocale()>, B<but> on some platforms the string
is opaque, not something that most people would be able to decipher as
to what locale it means.
-If no second argument is provided and the category is LC_ALL, the
+If no second argument is provided and the category is C<LC_ALL>, the
result is implementation-dependent. It may be a string of
concatenated locale names (separator also implementation-dependent)
or a single locale name. Please consult your L<setlocale(3)> man page for
to the environment made by the application after startup may or may not
be noticed, depending on your system's C library.
-Note that Perl ignores the current C<LC_CTYPE> and C<LC_COLLATE> locales
-within the scope of a C<use locale ':not_characters'>.
+Note that when a form of C<use locale> that doesn't include all
+categories is specified, Perl ignores the excluded categories.
If C<set_locale()> fails for some reason (for example, an attempt to set
to a locale unknown to the system), the locale for the category is not
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
-This means that your locale settings had LC_ALL set to "En_US" and
+This means that your locale settings had C<LC_ALL> set to "En_US" and
LANG exists but has no value. Perl tried to believe you but could not.
Instead, Perl gave up and fell back to the "C" locale, the default locale
that is supposed to work no matter what. (On Windows, it first tries
locale inconsistencies or to run Perl under the default locale "C".
Perl's moaning about locale problems can be silenced by setting the
-environment variable PERL_BADLANG to a zero value, for example "0".
+environment variable C<PERL_BADLANG> to "0" or "".
This method really just sweeps the problem under the carpet: you tell
Perl to shut up even when Perl sees that something is wrong. Do not
be surprised if later something locale-dependent misbehaves.
Perl can be run under the "C" locale by setting the environment
-variable LC_ALL to "C". This method is perhaps a bit more civilized
-than the PERL_BADLANG approach, but setting LC_ALL (or
+variable C<LC_ALL> to "C". This method is perhaps a bit more civilized
+than the C<PERL_BADLANG> approach, but setting C<LC_ALL> (or
other locale variables) may affect other programs as well, not just
Perl. In particular, external programs run from within Perl will see
these changes. If you make the new settings permanent (read on), all
programs you run see the changes. See L<"ENVIRONMENT"> for
the full list of relevant environment variables and L<USING LOCALES>
for their effects in Perl. Effects in other programs are
-easily deducible. For example, the variable LC_COLLATE may well affect
+easily deducible. For example, the variable C<LC_COLLATE> may well affect
your B<sort> program (or whatever the program that arranges "records"
alphabetically in your system is called).
You can test out changing these variables temporarily, and if the
new settings seem to help, put those settings into your shell startup
-files. Consult your local documentation for the exact details. For in
+files. Consult your local documentation for the exact details. For
Bourne-like shells (B<sh>, B<ksh>, B<bash>, B<zsh>):
LC_ALL=en_US.ISO8859-1
setenv LC_ALL en_US.ISO8859-1
-or if you have the "env" application you can do in any shell
+or if you have the "env" application you can do (in any shell)
env LC_ALL=en_US.ISO8859-1 perl ...
The C<POSIX::localeconv()> function allows you to get particulars of the
locale-dependent numeric formatting information specified by the current
-C<LC_NUMERIC> and C<LC_MONETARY> locales. (If you just want the name of
+underlying C<LC_NUMERIC> and C<LC_MONETARY> locales (regardless of
+whether called from within the scope of C<S<use locale>> or not). (If
+you just want the name of
the current locale for a particular category, use C<POSIX::setlocale()>
with a single parameter--see L<The setlocale function>.)
}
print "\n";
+Note that if the platform doesn't have C<LC_NUMERIC> and/or
+C<LC_MONETARY> available or enabled, the corresponding elements of the
+hash will be missing.
+
=head2 I18N::Langinfo
Another interface for querying locale-dependent information is the
some combination categories allow manipulation of more than one
basic category at a time. See L<"ENVIRONMENT"> for a discussion of these.
-=head2 Category LC_COLLATE: Collation
+=head2 Category C<LC_COLLATE>: Collation
-In the scope of S<C<use locale>> (but not a
-C<use locale ':not_characters'>), Perl looks to the C<LC_COLLATE>
+In the scope of a S<C<use locale>> form that includes collation, Perl
+looks to the C<LC_COLLATE>
environment variable to determine the application's notions on collation
(ordering) of characters. For example, "b" follows "a" in Latin
alphabets, but where do "E<aacute>" and "E<aring>" belong? And while
"color" follows "chocolate" in English, what about in traditional Spanish?
The following collations all make sense and you may meet any of them
-if you "use locale".
+if you C<"use locale">.
A B C D E a b c d e
A a B b C c D d E e
dictionary-like ordering that ignores space characters completely and
which folds case.
-Perl only supports single-byte locales for C<LC_COLLATE>. This means
+Perl currently only supports single-byte locales for C<LC_COLLATE>. This means
that a UTF-8 locale likely will just give you machine-native ordering.
Use L<Unicode::Collate> for the full implementation of the Unicode
Collation Algorithm.
which use the standard system-supplied C<libc> functions that
always obey the current C<LC_COLLATE> locale.
-=head2 Category LC_CTYPE: Character Types
+=head2 Category C<LC_CTYPE>: Character Types
-In the scope of S<C<use locale>> (but not a
-C<use locale ':not_characters'>), Perl obeys the C<LC_CTYPE> locale
+In the scope of a S<C<use locale>> form that includes C<LC_CTYPE>, Perl
+obeys the C<LC_CTYPE> locale
setting. This controls the application's notion of which characters are
alphabetic, numeric, punctuation, I<etc>. This affects Perl's C<\w>
regular expression metanotation,
The C<LC_CTYPE> locale also provides the map used in transliterating
characters between lower and uppercase. This affects the case-mapping
-functions--C<fc()>, C<lc()>, C<lcfirst()>, C<uc()>, and C<ucfirst()>; case-mapping
+functions--C<fc()>, C<lc()>, C<lcfirst()>, C<uc()>, and C<ucfirst()>;
+case-mapping
interpolation with C<\F>, C<\l>, C<\L>, C<\u>, or C<\U> in double-quoted
strings and C<s///> substitutions; and case-independent regular expression
pattern matching using the C<i> modifier.
Finally, C<LC_CTYPE> affects the (deprecated) POSIX character-class test
functions--C<POSIX::isalpha()>, C<POSIX::islower()>, and so on. For
-example, if you move from the "C" locale to a 7-bit Scandinavian one,
-you may find--possibly to your surprise--that "|" moves from the
+example, if you move from the "C" locale to a 7-bit ISO 646 one,
+you may find--possibly to your surprise--that C<"|"> moves from the
C<POSIX::ispunct()> class to C<POSIX::isalpha()>.
Unfortunately, this creates big problems for regular expressions. "|" still
-means alternation even though it matches C<\w>.
+means alternation even though it matches C<\w>. Starting in v5.22, a
+warning will be raised when such a locale is switched into. More
+details are given several paragraphs further down.
Starting in v5.20, Perl supports UTF-8 locales for C<LC_CTYPE>, but
otherwise Perl only supports single-byte locales, such as the ISO 8859
series. This means that wide character locales, for example for Asian
-languages, are not supported. The UTF-8 locale support is actually a
+languages, are not well-supported. (If the platform has the capability
+for Perl to detect such a locale, starting in Perl v5.22,
+L<Perl will warn, default enabled|warnings/Category Hierarchy>,
+using the C<locale> warning category, whenever such a locale is switched
+into.) The UTF-8 locale support is actually a
superset of POSIX locales, because it is really full Unicode behavior
-as if no locale were in effect at all (except for tainting; see
-L</SECURITY>). POSIX locales, even UTF-8 ones,
+as if no C<LC_CTYPE> locale were in effect at all (except for tainting;
+see L</SECURITY>). POSIX locales, even UTF-8 ones,
are lacking certain concepts in Unicode, such as the idea that changing
the case of a character could expand to be more than one character.
Perl in a UTF-8 locale, will give you that expansion. Prior to v5.20,
used as a workaround for this (see L</Unicode and UTF-8>).
Note that there are quite a few things that are unaffected by the
-current locale. All the escape sequences for particular characters,
+current locale. Any literal character is the native character for the
+given platform. Hence 'A' means the character at code point 65 on ASCII
+platforms, and 193 on EBCDIC. That may or may not be an 'A' in the
+current locale, if that locale even has an 'A'.
+Similarly, all the escape sequences for particular characters,
C<\n> for example, always mean the platform's native one. This means,
for example, that C<\N> in regular expressions (every character
but new-line) works on the platform character set.
+Starting in v5.22, Perl will by default warn when switching into a
+locale that redefines any ASCII printable character (plus C<\t> and
+C<\n>) into a different class than expected. This is likely to
+happen on modern locales only on EBCDIC platforms, where, for example,
+a CCSID 0037 locale on a CCSID 1047 machine moves C<"[">, but it can
+happen on ASCII platforms with the ISO 646 and other
+7-bit locales that are essentially obsolete. Things may still work,
+depending on what features of Perl are used by the program. For
+example, in the example from above where C<"|"> becomes a C<\w>, and
+there are no regular expressions where this matters, the program may
+still work properly. The warning lists all the characters that
+it can determine could be adversely affected.
+
B<Note:> A broken or malicious C<LC_CTYPE> locale definition may result
in clearly ineligible characters being considered to be alphanumeric by
your application. For strict matching of (mundane) ASCII letters and
digits--for example, in command strings--locale-aware applications
should use C<\w> with the C</a> regular expression modifier. See L<"SECURITY">.
-=head2 Category LC_NUMERIC: Numeric Formatting
+=head2 Category C<LC_NUMERIC>: Numeric Formatting
-After a proper C<POSIX::setlocale()> call, and within the scope of one
-of the C<use locale> variants, Perl obeys the C<LC_NUMERIC>
-locale information, which controls an application's idea of how numbers
-should be formatted for human readability.
+After a proper C<POSIX::setlocale()> call, and within the scope of
+of a C<use locale> form that includes numerics, Perl obeys the
+C<LC_NUMERIC> locale information, which controls an application's idea
+of how numbers should be formatted for human readability.
In most implementations the only effect is to
change the character used for the decimal point--perhaps from "." to ",".
The functions aren't aware of such niceties as thousands separation and
See also L<I18N::Langinfo> and C<RADIXCHAR>.
-=head2 Category LC_MONETARY: Formatting of monetary amounts
+=head2 Category C<LC_MONETARY>: Formatting of monetary amounts
The C standard defines the C<LC_MONETARY> category, but not a function
that is affected by its contents. (Those with experience of standards
See also L<I18N::Langinfo> and C<CRNCYSTR>.
-=head2 LC_TIME
+=head2 C<LC_TIME>
Output produced by C<POSIX::strftime()>, which builds a formatted
human-readable date/time string, is affected by the current C<LC_TIME>
Regular expression checks for safe file names or mail addresses using
C<\w> may be spoofed by an C<LC_CTYPE> locale that claims that
-characters such as "E<gt>" and "|" are alphanumeric.
+characters such as C<"E<gt>"> and C<"|"> are alphanumeric.
=item *
String interpolation with case-mapping, as in, say, C<$dest =
-"C:\U$name.$ext">, may produce dangerous results if a bogus LC_CTYPE
+"C:\U$name.$ext">, may produce dangerous results if a bogus C<LC_CTYPE>
case-mapping table is in effect.
=item *
B<Case-mapping interpolation> (with C<\l>, C<\L>, C<\u>, C<\U>, or C<\F>)
-Result string containing interpolated material is tainted if
-C<use locale> (but not S<C<use locale ':not_characters'>>) is in effect.
+The result string containing interpolated material is tainted if
+a C<use locale> form that includes C<LC_CTYPE> is in effect.
=item *
Scalar true/false result never tainted.
All subpatterns, either delivered as a list-context result or as C<$1>
-I<etc>., are tainted if C<use locale> (but not
-S<C<use locale ':not_characters'>>) is in effect, and the subpattern
+I<etc>., are tainted if a C<use locale> form that includes
+C<LC_CTYPE> is in effect, and the subpattern
regular expression contains a locale-dependent construct. These
constructs include C<\w> (to match an alphanumeric character), C<\W>
(non-alphanumeric character), C<\b> and C<\B> (word-boundary and
B<Substitution operator> (C<s///>):
Has the same behavior as the match operator. Also, the left
-operand of C<=~> becomes tainted when C<use locale>
-(but not S<C<use locale ':not_characters'>>) is in effect if modified as
+operand of C<=~> becomes tainted when a C<use locale>
+form that includes C<LC_CTYPE> is in effect, if modified as
a result of a substitution based on a regular
expression match involving any of the things mentioned in the previous
item, or of case-mapping, such as C<\l>, C<\L>,C<\u>, C<\U>, or C<\F>.
B<Case-mapping functions> (C<lc()>, C<lcfirst()>, C<uc()>, C<ucfirst()>):
-Results are tainted if C<use locale> (but not
-S<C<use locale ':not_characters'>>) is in effect.
+Results are tainted if a C<use locale> form that includes C<LC_CTYPE> is
+in effect.
=item *
=item PERL_SKIP_LOCALE_INIT
-This environment variable, available starting in Perl v5.20, and if it
-evaluates to a TRUE value, tells Perl to not use the rest of the
+This environment variable, available starting in Perl v5.20, if set
+(to any value), tells Perl to not use the rest of the
environment variables to initialize with. Instead, Perl uses whatever
the current locale settings are. This is particularly useful in
embedded environments, see
at startup. Failure can occur if the locale support in the operating
system is lacking (broken) in some way--or if you mistyped the name of
a locale when you set up your environment. If this environment
-variable is absent, or has a value that does not evaluate to integer
-zero--that is, "0" or ""-- Perl will complain about locale setting
-failures.
+variable is absent, or has a value other than "0" or "", Perl will
+complain about locale setting failures.
-B<NOTE>: PERL_BADLANG only gives you a way to hide the warning message.
+B<NOTE>: C<PERL_BADLANG> only gives you a way to hide the warning message.
The message tells about some problem in your system's locale support,
and you should investigate what the problem is.
the next lower one in priority. If none are valid, on Windows, the
system default locale is then tried. If all else fails, the C<"C">
locale is used. If even that doesn't work, something is badly broken,
-but Perl tries to forge ahead with whatever the locale settinga might
+but Perl tries to forge ahead with whatever the locale settings might
be.
=over 12
-=item LC_ALL
+=item C<LC_ALL>
C<LC_ALL> is the "override-all" locale environment variable. If
set, it overrides all the rest of the locale environment variables.
-=item LANGUAGE
+=item C<LANGUAGE>
B<NOTE>: C<LANGUAGE> is a GNU extension, it affects you only if you
are using the GNU libc. This is the case if you are using e.g. Linux.
instead a "path" (":"-separated list) of I<languages> (not locales).
See the GNU C<gettext> library documentation for more information.
-=item LC_CTYPE
+=item C<LC_CTYPE>
In the absence of C<LC_ALL>, C<LC_CTYPE> chooses the character type
locale. In the absence of both C<LC_ALL> and C<LC_CTYPE>, C<LANG>
chooses the character type locale.
-=item LC_COLLATE
+=item C<LC_COLLATE>
In the absence of C<LC_ALL>, C<LC_COLLATE> chooses the collation
(sorting) locale. In the absence of both C<LC_ALL> and C<LC_COLLATE>,
C<LANG> chooses the collation locale.
-=item LC_MONETARY
+=item C<LC_MONETARY>
In the absence of C<LC_ALL>, C<LC_MONETARY> chooses the monetary
formatting locale. In the absence of both C<LC_ALL> and C<LC_MONETARY>,
C<LANG> chooses the monetary formatting locale.
-=item LC_NUMERIC
+=item C<LC_NUMERIC>
In the absence of C<LC_ALL>, C<LC_NUMERIC> chooses the numeric format
locale. In the absence of both C<LC_ALL> and C<LC_NUMERIC>, C<LANG>
chooses the numeric format.
-=item LC_TIME
+=item C<LC_TIME>
In the absence of C<LC_ALL>, C<LC_TIME> chooses the date and time
formatting locale. In the absence of both C<LC_ALL> and C<LC_TIME>,
C<LANG> chooses the date and time formatting locale.
-=item LANG
+=item C<LANG>
C<LANG> is the "catch-all" locale environment variable. If it is set, it
is used as the last resort after the overall C<LC_ALL> and the
-category-specific C<LC_...>.
+category-specific C<LC_I<foo>>.
=back
=head2 Examples
-The LC_NUMERIC controls the numeric output:
+The C<LC_NUMERIC> controls the numeric output:
use locale;
use POSIX qw(locale_h); # Imports setlocale() and the LC_ constants.
This prints C<2.7>.
+You could also exclude C<LC_NUMERIC>, if you don't need it, by
+
+ use locale ':!numeric';
+
=head2 Backward compatibility
Versions of Perl prior to 5.004 B<mostly> ignored locale information,
(see L<The setlocale function>). By default, Perl still behaves this
way for backward compatibility. If you want a Perl application to pay
attention to locale information, you B<must> use the S<C<use locale>>
-pragma (see L<The use locale pragma>) or, in the unlikely event
+pragma (see L<The "use locale" pragma>) or, in the unlikely event
that you want to do so for just pattern matching, the
C</l> regular expression modifier (see L<perlre/Character set
modifiers>) to instruct it to do so.
they and Perl store characters that take up multiple bytes the same way.
However, some, if not most, C library implementations may not process
the characters in the upper half of the Latin-1 range (128 - 255)
-properly under LC_CTYPE. To see if a character is a particular type
+properly under C<LC_CTYPE>. To see if a character is a particular type
under a locale, Perl uses the functions like C<isalnum()>. Your C
library may not work for UTF-8 locales with those functions, instead
-only working under the newer wide library functions like C<iswalnum()>.
-However, they are treated like single-byte locales, and will have the
-restrictions described below.
+only working under the newer wide library functions like C<iswalnum()>,
+which Perl does not use.
+These multi-byte locales are treated like single-byte locales, and will
+have the restrictions described below. Starting in Perl v5.22 a warning
+message is raised when Perl detects a multi-byte locale that it doesn't
+fully support.
For single-byte locales,
Perl generally takes the tack to use locale rules on code points that can fit
issue occurs with C<\N{...}>. Prior to v5.20, It is therefore a bad
idea to use C<\p{}> or
C<\N{}> under plain C<use locale>--I<unless> you can guarantee that the
-locale will be a ISO8859-1. Use POSIX character classes instead.
+locale will be ISO8859-1. Use POSIX character classes instead.
Another problem with this approach is that operations that cross the
single byte/multiple byte boundary are not well-defined, and so are
points meaning the same character. Thus in a Greek locale, both U+03A7
and U+00D7 are GREEK CAPITAL LETTER CHI.
+Because of all these problems, starting in v5.22, Perl will raise a
+warning if a multi-byte (hence Unicode) code point is used when a
+single-byte locale is in effect. (Although it doesn't check for this if
+doing so would unreasonably slow execution down.)
+
Vendor locales are notoriously buggy, and it is difficult for Perl to test
its locale-handling code because this interacts with code that Perl has no
control over; therefore the locale-handling code in Perl may be buggy as
Pre-v5.12, it was somewhat haphazard; in v5.12 it was applied fairly
consistently to regular expression matching except for bracketed
character classes; in v5.14 it was extended to all regex matches; and in
-v5.16 to the casing operations such as C<"\L"> and C<uc()>. For
-collation, in all releases, the system's C<strxfrm()> function is called,
-and whatever it does is what you get.
+v5.16 to the casing operations such as C<\L> and C<uc()>. For
+collation, in all releases so far, the system's C<strxfrm()> function is
+called, and whatever it does is what you get.
=head1 BUGS
https://perl5.git.perl.org / perl5.git / blobdiff