=head1 NAME
-perlfaq8 - System Interaction ($Revision: 1.14 $, $Date: 2002/11/10 17:35:47 $)
+perlfaq8 - System Interaction ($Revision: 1.27 $, $Date: 2005/12/31 00:54:37 $)
=head1 DESCRIPTION
=item Keyboard
- Term::Cap Standard perl distribution
- Term::ReadKey CPAN
- Term::ReadLine::Gnu CPAN
- Term::ReadLine::Perl CPAN
- Term::Screen CPAN
+ Term::Cap Standard perl distribution
+ Term::ReadKey CPAN
+ Term::ReadLine::Gnu CPAN
+ Term::ReadLine::Perl CPAN
+ Term::Screen CPAN
=item Screen
- Term::Cap Standard perl distribution
- Curses CPAN
- Term::ANSIColor CPAN
+ Term::Cap Standard perl distribution
+ Curses CPAN
+ Term::ANSIColor CPAN
=item Mouse
- Tk CPAN
+ Tk CPAN
=back
-Some of these specific cases are shown below.
+Some of these specific cases are shown as examples in other answers
+in this section of the perlfaq.
=head2 How do I print something out in color?
Controlling input buffering is a remarkably system-dependent matter.
On many systems, you can just use the B<stty> command as shown in
L<perlfunc/getc>, but as you see, that's already getting you into
-portability snags.
+portability snags.
open(TTY, "+</dev/tty") or die "no tty: $!";
system "stty cbreak </dev/tty >/dev/tty 2>&1";
=head2 How do I get the screen size?
-If you have Term::ReadKey module installed from CPAN,
+If you have Term::ReadKey module installed from CPAN,
you can use it to fetch the width and height in characters
and in pixels:
use Term::ReadKey;
($wchar, $hchar, $wpixels, $hpixels) = GetTerminalSize();
-This is more portable than the raw C<ioctl>, but not as
+This is more portable than the raw C<ioctl>, but not as
illustrative:
require 'sys/ioctl.ph';
If you expect characters to get to your device when you print() them,
you'll want to autoflush that filehandle. You can use select()
-and the C<$|> variable to control autoflushing (see L<perlvar/$|>
-and L<perlfunc/select>, or L<perlfaq5>, ``How do I flush/unbuffer an
-output filehandle? Why must I do this?''):
+and the C<$|> variable to control autoflushing (see L<perlvar/$E<verbar>>
+and L<perlfunc/select>, or L<perlfaq5>, "How do I flush/unbuffer an
+output filehandle? Why must I do this?"):
$oldh = select(DEV);
$| = 1;
You have to be prepared to "reap" the child process when it finishes.
$SIG{CHLD} = sub { wait };
-
+
$SIG{CHLD} = 'IGNORE';
-
-You can also use a double fork. You immediately wait() for your
-first child, and the init daemon will wait() for your grandchild once
+
+You can also use a double fork. You immediately wait() for your
+first child, and the init daemon will wait() for your grandchild once
it exits.
unless ($pid = fork) {
generates a signal which is sent to your terminal's currently
foregrounded process group, which you then trap in your process.
Signals are documented in L<perlipc/"Signals"> and the
-section on ``Signals'' in the Camel.
+section on "Signals" in the Camel.
-Be warned that very few C libraries are re-entrant. Therefore, if you
-attempt to print() in a handler that got invoked during another stdio
-operation your internal structures will likely be in an
-inconsistent state, and your program will dump core. You can
-sometimes avoid this by using syswrite() instead of print().
+You can set the values of the %SIG hash to be the functions you want
+to handle the signal. After perl catches the signal, it looks in %SIG
+for a key with the same name as the signal, then calls the subroutine
+value for that key.
-Unless you're exceedingly careful, the only safe things to do inside a
-signal handler are (1) set a variable and (2) exit. In the first case,
-you should only set a variable in such a way that malloc() is not
-called (eg, by setting a variable that already has a value).
+ # as an anonymous subroutine
-For example:
+ $SIG{INT} = sub { syswrite(STDERR, "ouch\n", 5 ) };
- $Interrupted = 0; # to ensure it has a value
- $SIG{INT} = sub {
- $Interrupted++;
- syswrite(STDERR, "ouch\n", 5);
- }
+ # or a reference to a function
+
+ $SIG{INT} = \&ouch;
+
+ # or the name of the function as a string
+
+ $SIG{INT} = "ouch";
+
+Perl versions before 5.8 had in its C source code signal handlers which
+would catch the signal and possibly run a Perl function that you had set
+in %SIG. This violated the rules of signal handling at that level
+causing perl to dump core. Since version 5.8.0, perl looks at %SIG
+*after* the signal has been caught, rather than while it is being caught.
+Previous versions of this answer were incorrect.
-However, because syscalls restart by default, you'll find that if
-you're in a "slow" call, such as <FH>, read(), connect(), or
-wait(), that the only way to terminate them is by "longjumping" out;
-that is, by raising an exception. See the time-out handler for a
-blocking flock() in L<perlipc/"Signals"> or the section on ``Signals''
-in the Camel book.
=head2 How do I modify the shadow password file on a Unix system?
properly, the getpw*() functions described in L<perlfunc> should in
theory provide (read-only) access to entries in the shadow password
file. To change the file, make a new shadow password file (the format
-varies from system to system--see L<passwd(5)> for specifics) and use
-pwd_mkdb(8) to install it (see L<pwd_mkdb(8)> for more details).
+varies from system to system--see L<passwd> for specifics) and use
+pwd_mkdb(8) to install it (see L<pwd_mkdb> for more details).
=head2 How do I set the time and date?
Release 5 of Perl added the END block, which can be used to simulate
atexit(). Each package's END block is called when the program or
-thread ends (see L<perlmod> manpage for more details).
+thread ends (see L<perlmod> manpage for more details).
For example, you can use this to make sure your filter program
managed to finish its output without filling up the disk:
END {
close(STDOUT) || die "stdout close failed: $!";
- }
+ }
The END block isn't called when untrapped signals kill the program,
though, so if you use END blocks you should also use
Perl's exception-handling mechanism is its eval() operator. You can
use eval() as setjmp and die() as longjmp. For details of this, see
the section on signals, especially the time-out handler for a blocking
-flock() in L<perlipc/"Signals"> or the section on ``Signals'' in
+flock() in L<perlipc/"Signals"> or the section on "Signals" in
the Camel Book.
If exception handling is all you're interested in, try the
L<perlfunc>).
Remember to check the modules that came with your distribution, and
-CPAN as well--someone may already have written a module to do it.
+CPAN as well---someone may already have written a module to do it. On
+Windows, try Win32::API. On Macs, try Mac::Carbon. If no module
+has an interface to the C function, you can inline a bit of C in your
+Perl source with Inline::C.
=head2 Where do I get the include files to do ioctl() or syscall()?
The IPC::Open2 module (part of the standard perl distribution) is an
easy-to-use approach that internally uses pipe(), fork(), and exec() to do
the job. Make sure you read the deadlock warnings in its documentation,
-though (see L<IPC::Open2>). See
-L<perlipc/"Bidirectional Communication with Another Process"> and
+though (see L<IPC::Open2>). See
+L<perlipc/"Bidirectional Communication with Another Process"> and
L<perlipc/"Bidirectional Communication with Yourself">
You may also use the IPC::Open3 module (part of the standard perl
use IPC::Open3;
use Symbol qw(gensym);
use IO::File;
- local *CATCHOUT = IO::File->new_tempfile;
- local *CATCHERR = IO::File->new_tempfile;
+ local *CATCHOUT = IO::File->new_tmpfile;
+ local *CATCHERR = IO::File->new_tmpfile;
my $pid = open3(gensym, ">&CATCHOUT", ">&CATCHERR", "cmd");
waitpid($pid, 0);
seek $_, 0, 0 for \*CATCHOUT, \*CATCHERR;
use IPC::Open3;
use Symbol qw(gensym);
use IO::File;
- local *CATCHERR = IO::File->new_tempfile;
+ local *CATCHERR = IO::File->new_tmpfile;
my $pid = open3(gensym, \*CATCHOUT, ">&CATCHERR", "cmd");
while( <CATCHOUT> ) {}
waitpid($pid, 0);
while (<PH>) { } # plus a read
To read both a command's STDOUT and its STDERR separately, it's easiest
-and safest to redirect them separately to files, and then read from those
-files when the program is done:
+to redirect them separately to files, and then read from those files
+when the program is done:
- system("program args 1>/tmp/program.stdout 2>/tmp/program.stderr");
+ system("program args 1>program.stdout 2>program.stderr");
Ordering is important in all these examples. That's because the shell
processes file descriptor redirections in strictly left to right order.
way to write maintainable code. Perl has several operators for
running external commands. Backticks are one; they collect the output
from the command for use in your program. The C<system> function is
-another; it doesn't do this.
+another; it doesn't do this.
Writing backticks in your program sends a clear message to the readers
of your code that you wanted to collect the output of the command.
process are not reflected in its parent--only in any children
created after the change. There is shell magic that may allow you to
fake it by eval()ing the script's output in your shell; check out the
-comp.unix.questions FAQ for details.
+comp.unix.questions FAQ for details.
=back
=item *
-Open /dev/tty and use the TIOCNOTTY ioctl on it. See L<tty(4)>
+Open /dev/tty and use the TIOCNOTTY ioctl on it. See L<tty>
for details. Or better yet, you can just use the POSIX::setsid()
function, so you don't have to worry about process groups.
Use the alarm() function, probably in conjunction with a signal
handler, as documented in L<perlipc/"Signals"> and the section on
-``Signals'' in the Camel. You may instead use the more flexible
+"Signals" in the Camel. You may instead use the more flexible
Sys::AlarmCall module available from CPAN.
The alarm() function is not implemented on all versions of Windows.
=head2 How do I use an SQL database?
-There are a number of excellent interfaces to SQL databases. See the
-DBD::* modules available from http://www.cpan.org/modules/by-module/DBD/ .
-A lot of information on this can be found at http://dbi.perl.org/
+The DBI module provides an abstract interface to most database
+servers and types, including Oracle, DB2, Sybase, mysql, Postgresql,
+ODBC, and flat files. The DBI module accesses each database type
+through a database driver, or DBD. You can see a complete list of
+available drivers on CPAN: http://www.cpan.org/modules/by-module/DBD/ .
+You can read more about DBI on http://dbi.perl.org .
+
+Other modules provide more specific access: Win32::ODBC, Alzabo, iodbc,
+and others found on CPAN Search: http://search.cpan.org .
=head2 How do I make a system() exit on control-C?
passes the signal on to the subprocess. Or you can check for it:
$rc = system($cmd);
- if ($rc & 127) { die "signal death" }
+ if ($rc & 127) { die "signal death" }
=head2 How do I open a file without blocking?
sysopen():
use Fcntl;
- sysopen(FH, "/tmp/somefile", O_WRONLY|O_NDELAY|O_CREAT, 0644)
- or die "can't open /tmp/somefile: $!":
+ sysopen(FH, "/foo/somefile", O_WRONLY|O_NDELAY|O_CREAT, 0644)
+ or die "can't open /foo/somefile: $!":
+
+=head2 How do I tell the difference between errors from the shell and perl?
+
+(answer contributed by brian d foy, C<< <bdfoy@cpan.org> >>
+
+When you run a Perl script, something else is running the script for you,
+and that something else may output error messages. The script might
+emit its own warnings and error messages. Most of the time you cannot
+tell who said what.
+
+You probably cannot fix the thing that runs perl, but you can change how
+perl outputs its warnings by defining a custom warning and die functions.
+
+Consider this script, which has an error you may not notice immediately.
+
+ #!/usr/locl/bin/perl
+
+ print "Hello World\n";
+
+I get an error when I run this from my shell (which happens to be
+bash). That may look like perl forgot it has a print() function,
+but my shebang line is not the path to perl, so the shell runs the
+script, and I get the error.
+
+ $ ./test
+ ./test: line 3: print: command not found
+
+A quick and dirty fix involves a little bit of code, but this may be all
+you need to figure out the problem.
+
+ #!/usr/bin/perl -w
+
+ BEGIN {
+ $SIG{__WARN__} = sub{ print STDERR "Perl: ", @_; };
+ $SIG{__DIE__} = sub{ print STDERR "Perl: ", @_; exit 1};
+ }
+
+ $a = 1 + undef;
+ $x / 0;
+ __END__
+
+The perl message comes out with "Perl" in front. The BEGIN block
+works at compile time so all of the compilation errors and warnings
+get the "Perl:" prefix too.
+
+ Perl: Useless use of division (/) in void context at ./test line 9.
+ Perl: Name "main::a" used only once: possible typo at ./test line 8.
+ Perl: Name "main::x" used only once: possible typo at ./test line 9.
+ Perl: Use of uninitialized value in addition (+) at ./test line 8.
+ Perl: Use of uninitialized value in division (/) at ./test line 9.
+ Perl: Illegal division by zero at ./test line 9.
+ Perl: Illegal division by zero at -e line 3.
+
+If I don't see that "Perl:", it's not from perl.
+
+You could also just know all the perl errors, and although there are
+some people who may know all of them, you probably don't. However, they
+all should be in the perldiag manpage. If you don't find the error in
+there, it probably isn't a perl error.
+
+Looking up every message is not the easiest way, so let perl to do it
+for you. Use the diagnostics pragma with turns perl's normal messages
+into longer discussions on the topic.
+
+ use diagnostics;
+
+If you don't get a paragraph or two of expanded discussion, it
+might not be perl's message.
=head2 How do I install a module from CPAN?
The easiest way is to have a module also named CPAN do it for you.
-This module comes with perl version 5.004 and later.
+This module comes with perl version 5.004 and later.
$ perl -MCPAN -e shell
cpan shell -- CPAN exploration and modules installation (v1.59_54)
ReadLine support enabled
- cpan> install Some::Module
+ cpan> install Some::Module
-To manually install the CPAN module, or any well-behaved CPAN module
+To manually install the CPAN module, or any well-behaved CPAN module
for that matter, follow these steps:
=over 4
get a new F<perl> binary with your extension linked in.
See L<ExtUtils::MakeMaker> for more details on building extensions.
-See also the next question, ``What's the difference between require
-and use?''.
+See also the next question, "What's the difference between require
+and use?".
=head2 What's the difference between require and use?
=head2 How do I keep my own module/library directory?
-When you build modules, use the PREFIX option when generating
+When you build modules, use the PREFIX and LIB options when generating
Makefiles:
- perl Makefile.PL PREFIX=/u/mydir/perl
+ perl Makefile.PL PREFIX=/mydir/perl LIB=/mydir/perl/lib
then either set the PERL5LIB environment variable before you run
scripts that use the modules/libraries (see L<perlrun>) or say
- use lib '/u/mydir/perl';
+ use lib '/mydir/perl/lib';
This is almost the same as
BEGIN {
- unshift(@INC, '/u/mydir/perl');
+ unshift(@INC, '/mydir/perl/lib');
}
except that the lib module checks for machine-dependent subdirectories.
use lib "$FindBin::Bin";
use your_own_modules;
-=head2 How do I add a directory to my include path at runtime?
+=head2 How do I add a directory to my include path (@INC) at runtime?
Here are the suggested ways of modifying your include path:
=head1 AUTHOR AND COPYRIGHT
-Copyright (c) 1997-2002 Tom Christiansen and Nathan Torkington.
-All rights reserved.
+Copyright (c) 1997-2006 Tom Christiansen, Nathan Torkington, and
+other authors as noted. All rights reserved.
This documentation is free; you can redistribute it and/or modify it
under the same terms as Perl itself.
https://perl5.git.perl.org / perl5.git / blobdiff