the number of bits specified by the right argument. Arguments should
be integers. (See also L<Integer Arithmetic>.)
+Note that both "<<" and ">>" in Perl are implemented directly using
+"<<" and ">>" in C. If C<use integer> (see L<Integer Arithmetic>) is
+in force then signed C integers are used, else unsigned C integers are
+used. Either way, the implementation isn't going to generate results
+larger than the size of the integer type Perl was built with (32 bits
+or 64 bits).
+
+The result of overflowing the range of the integers is undefined
+because it is undefined also in C. In other words, using 32-bit
+integers, C<< 1 << 32 >> is undefined. Shifting by a negative number
+of bits is also undefined.
+
=head2 Named Unary Operators
The various named unary operators are treated as functions with one
Customary Generic Meaning Interpolates
'' q{} Literal no
"" qq{} Literal yes
- `` qx{} Command yes (unless '' is delimiter)
+ `` qx{} Command yes*
qw{} Word list no
- // m{} Pattern match yes (unless '' is delimiter)
- qr{} Pattern yes (unless '' is delimiter)
- s{}{} Substitution yes (unless '' is delimiter)
+ // m{} Pattern match yes*
+ qr{} Pattern yes*
+ s{}{} Substitution yes*
tr{}{} Transliteration no (but see below)
+ <<EOF here-doc yes*
+
+ * unless the delimiter is ''.
Non-bracketing delimiters use the same character fore and aft, but the four
sorts of brackets (round, angle, square, curly) will all nest, which means
$s = q{ if($a eq "}") ... }; # WRONG
-is a syntax error. The C<Text::Balanced> module on CPAN is able to do this
-properly.
+is a syntax error. The C<Text::Balanced> module (from CPAN, and
+starting from Perl 5.8 part of the standard distribution) is able
+to do this properly.
There can be whitespace between the operator and the quoting
characters, except when C<#> is being used as the quoting character.
s {foo} # Replace foo
{bar} # with bar.
-For constructs that do interpolate, variables beginning with "C<$>"
-or "C<@>" are interpolated, as are the following escape sequences. Within
-a transliteration, the first eleven of these sequences may be used.
+The following escape sequences are available in constructs that interpolate
+and in transliterations.
\t tab (HT, TAB)
\n newline (NL)
\c[ control char (ESC)
\N{name} named char
+The following escape sequences are available in constructs that interpolate
+but not in transliterations.
+
\l lowercase next char
\u uppercase next char
\L lowercase till \E
C<"\015">. If you get in the habit of using C<"\n"> for networking,
you may be burned some day.
+For constructs that do interpolate, variables beginning with "C<$>"
+or "C<@>" are interpolated. Subscripted variables such as C<$a[3]> or
+C<$href->{key}[0]> are also interpolated, as are array and hash slices.
+But method calls such as C<$obj->meth> are not.
+
+Interpolating an array or slice interpolates the elements in order,
+separated by the value of C<$">, so is equivalent to interpolating
+C<join $", @array>. "Punctuation" arrays such as C<@+> are only
+interpolated if the name is enclosed in braces C<@{+}>.
+
You cannot include a literal C<$> or C<@> within a C<\Q> sequence.
An unescaped C<$> or C<@> interpolates the corresponding variable,
while escaping will cause the literal string C<\$> to be inserted.
eval "tr/$oldlist/$newlist/, 1" or die $@;
+=item <<EOF
+
+A line-oriented form of quoting is based on the shell "here-document"
+syntax. Following a C<< << >> you specify a string to terminate
+the quoted material, and all lines following the current line down to
+the terminating string are the value of the item. The terminating
+string may be either an identifier (a word), or some quoted text. If
+quoted, the type of quotes you use determines the treatment of the
+text, just as in regular quoting. An unquoted identifier works like
+double quotes. There must be no space between the C<< << >> and
+the identifier, unless the identifier is quoted. (If you put a space it
+will be treated as a null identifier, which is valid, and matches the first
+empty line.) The terminating string must appear by itself (unquoted and
+with no surrounding whitespace) on the terminating line.
+
+ print <<EOF;
+ The price is $Price.
+ EOF
+
+ print << "EOF"; # same as above
+ The price is $Price.
+ EOF
+
+ print << `EOC`; # execute commands
+ echo hi there
+ echo lo there
+ EOC
+
+ print <<"foo", <<"bar"; # you can stack them
+ I said foo.
+ foo
+ I said bar.
+ bar
+
+ myfunc(<< "THIS", 23, <<'THAT');
+ Here's a line
+ or two.
+ THIS
+ and here's another.
+ THAT
+
+Just don't forget that you have to put a semicolon on the end
+to finish the statement, as Perl doesn't know you're not going to
+try to do this:
+
+ print <<ABC
+ 179231
+ ABC
+ + 20;
+
+If you want your here-docs to be indented with the
+rest of the code, you'll need to remove leading whitespace
+from each line manually:
+
+ ($quote = <<'FINIS') =~ s/^\s+//gm;
+ The Road goes ever on and on,
+ down from the door where it began.
+ FINIS
+
+If you use a here-doc within a delimited construct, such as in C<s///eg>,
+the quoted material must come on the lines following the final delimiter.
+So instead of
+
+ s/this/<<E . 'that'
+ the other
+ E
+ . 'more '/eg;
+
+you have to write
+
+ s/this/<<E . 'that'
+ . 'more '/eg;
+ the other
+ E
+
+If the terminating identifier is on the last line of the program, you
+must be sure there is a newline after it; otherwise, Perl will give the
+warning B<Can't find string terminator "END" anywhere before EOF...>.
+
+Additionally, the quoting rules for the identifier are not related to
+Perl's quoting rules -- C<q()>, C<qq()>, and the like are not supported
+in place of C<''> and C<"">, and the only interpolation is for backslashing
+the quoting character:
+
+ print << "abc\"def";
+ testing...
+ abc"def
+
+Finally, quoted strings cannot span multiple lines. The general rule is
+that the identifier must be a string literal. Stick with that, and you
+should be safe.
+
=back
=head2 Gory details of parsing quoted constructs
If you call it again after this, it will assume you are processing another
@ARGV list, and if you haven't set @ARGV, will read input from STDIN.
-If angle brackets contain is a simple scalar variable (e.g.,
+If what the angle brackets contain is a simple scalar variable (e.g.,
<$foo>), then that variable contains the name of the
filehandle to input from, or its typeglob, or a reference to the
same. For example:
because the latter will alternate between returning a filename and
returning false.
-It you're trying to do variable interpolation, it's definitely better
+If you're trying to do variable interpolation, it's definitely better
to use the glob() function, because the older notation can cause people
to become confused with the indirect filehandle notation.
The standard Math::BigInt and Math::BigFloat modules provide
variable-precision arithmetic and overloaded operators, although
-they're currently pretty slow. At the cost of some space and
+they're currently pretty slow. At the cost of some space and
considerable speed, they avoid the normal pitfalls associated with
limited-precision representations.
# prints +15241578780673678515622620750190521
-The non-standard modules SSLeay::BN and Math::Pari provide
-equivalent functionality (and much more) with a substantial
-performance savings.
+There are several modules that let you calculate with (bound only by
+memory and cpu-time) unlimited or fixed precision. There are also
+some non-standard modules that provide faster implementations via
+external C libraries.
+
+Here is a short, but incomplete summary:
+
+ Math::Fraction big, unlimited fractions like 9973 / 12967
+ Math::String treat string sequences like numbers
+ Math::FixedPrecision calculate with a fixed precision
+ Math::Currency for currency calculations
+ Bit::Vector manipulate bit vectors fast (uses C)
+ Math::BigIntFast Bit::Vector wrapper for big numbers
+ Math::Pari provides access to the Pari C library
+ Math::BigInteger uses an external C library
+ Math::Cephes uses external Cephes C library (no big numbers)
+ Math::Cephes::Fraction fractions via the Cephes library
+ Math::GMP another one using an external C library
+
+Choose wisely.
=cut
https://perl5.git.perl.org / perl5.git / blobdiff