quote() {
case "$1" in
'') echo "''" ;;
- *) echo "$1" | sed 's/\([^a-zA-Z0-9.:_\-\/]\)/\\\1/g' ;;
+ *) echo "$1" | sed 's/\([^a-zA-Z0-9.:_/-]\)/\\\1/g' ;;
esac
}
mallocsrc = $mallocsrc
mallocobj = $mallocobj
-madlysrc = $madlysrc
-madlyobj = $madlyobj
LNS = $lns
# NOTE: some systems don't grok "cp -f". XXX Configure test needed?
CPS = $cp
MINIPERL_EXE = miniperl\$(EXE_EXT)
MINIPERL = \$(LDLIBPTH) ./miniperl\$(EXE_EXT) -Ilib
+# Macros to invoke sort the MANIFEST during build
+MANIFEST_SRT = MANIFEST.srt
+
!GROK!THIS!
case "$usecrosscompile$perl" in
libs = $perllibs $cryptlib
-public = \$(PERL_EXE) utilities translators
+public = \$(PERL_EXE) utilities
shellflags = $shellflags
echo $@ | sed -e s/\\\.SH//g -e s/_/./g
}
-SH='Makefile.SH cflags.SH config_h.SH makedepend.SH myconfig.SH runtests.SH pod/Makefile.SH x2p/Makefile.SH'
+SH='Makefile.SH cflags.SH config_h.SH makedepend.SH myconfig.SH runtests.SH pod/Makefile.SH'
shextract=`SH_to_target $SH`
## In the following dollars and backticks do not need the extra backslash.
h6 = charclass_invlists.h
h = $(h1) $(h2) $(h3) $(h4) $(h5) $(h6)
-c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c
+c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro_core.c perl.c
c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c
c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c
-c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c caretx.c
-c5 = $(madlysrc) $(mallocsrc)
+c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c caretx.c dquote.c time64.c
+c5 = $(mallocsrc)
c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c opmini.c perlmini.c
obj0 = op$(OBJ_EXT) perl$(OBJ_EXT)
obj0mini = perlmini$(OBJ_EXT) opmini$(OBJ_EXT) miniperlmain$(OBJ_EXT)
-obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT) keywords$(OBJ_EXT)
+obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro_core$(OBJ_EXT) keywords$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) caretx$(OBJ_EXT)
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) caretx$(OBJ_EXT) dquote$(OBJ_EXT) time64$(OBJ_EXT)
minindt_obj = $(obj0mini) $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
mini_obj = $(minindt_obj) $(MINIDTRACE_O)
ndt_obj = $(obj0) $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
obj = $(ndt_obj) $(DTRACE_O)
-perltoc_pod_prereqs = extra.pods pod/perl5199delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
+perltoc_pod_prereqs = extra.pods pod/perl5232delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
generated_pods = pod/perltoc.pod $(perltoc_pod_prereqs)
generated_headers = uudmap.h bitcount.h mg_data.h
@echo `$(CCCMD)` $(PLDLFLAGS) $*.c
@`$(CCCMD)` $(PLDLFLAGS) $*.c
-.c.i:
+.c.i: perl.h config.h
@echo `$(CCCMDSRC)` -E $*.c \> $*.i
@`$(CCCMDSRC)` -E $*.c > $*.i
-.c.s:
+.c.s: perl.h config.h
@echo `$(CCCMDSRC)` -S $*.c
@`$(CCCMDSRC)` -S $*.c
-all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
+all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make $(MANIFEST_SRT)
@echo " ";
@echo " Everything is up to date. Type '$(MAKE) test' to run test suite."
-.PHONY: all translators utilities
+$(MANIFEST_SRT): MANIFEST $(PERL_EXE)
+ @$(RUN_PERL) Porting/manisort -q || (echo "WARNING: re-sorting MANIFEST"; \
+ $(RUN_PERL) Porting/manisort -q -o MANIFEST; sh -c true)
+ @touch $(MANIFEST_SRT)
+
+.PHONY: all utilities
# Both git_version.h and lib/Config_git.pl are built
# by make_patchnum.pl.
!NO!SUBS!
-# Making utilities and translators require Cwd. If we have dynamic
+# Making utilities requires Cwd. If we have dynamic
# loading, we only need miniperl and Cwd.$dlext. If we have static
# loading, we need to build perl first.
case "$usedl$static_cwd" in
defineundef)
util_deps='$(MINIPERL_EXE) $(CONFIGPM) lib/auto/Cwd/Cwd$(DLSUFFIX) FORCE'
- x2p_deps="\$(MINIPERL_EXE) \$(CONFIGPM) \$(dynamic_ext) x2p/$firstmakefile FORCE"
;;
definedefine)
util_deps='$(PERL_EXE) $(CONFIGPM) FORCE'
- x2p_deps="\$(PERL_EXE) \$(CONFIGPM) \$(dynamic_ext) x2p/$firstmakefile FORCE"
;;
*) util_deps='$(PERL_EXE) $(CONFIGPM) FORCE'
- x2p_deps="\$(PERL_EXE) \$(CONFIGPM) x2p/$firstmakefile FORCE"
;;
esac
$spitshell >>$Makefile <<!GROK!THIS!
-x2p/$firstmakefile: makedepend
- cd x2p; \$(MAKE) depend
-
-translators: $x2p_deps
- @echo " "; echo " Making x2p stuff"; cd x2p; \$(LDLIBPTH) \$(MAKE) all
-
-x2p/s2p: $x2p_deps
- cd x2p; \$(LDLIBPTH) \$(MAKE) s2p
-
-x2p/find2perl: $x2p_deps
- cd x2p; \$(LDLIBPTH) \$(MAKE) find2perl
-
utils/Makefile: \$(MINIPERL_EXE) \$(CONFIGPM) utils/Makefile.PL
\$(MINIPERL) -Ilib utils/Makefile.PL
uudmap.h mg_data.h: bitcount.h
-bitcount.h: generate_uudmap$(HOST_EXE_EXT)
- ./generate_uudmap$(HOST_EXE_EXT) $(generated_headers)
-
generate_uudmap$(OBJ_EXT): mg_raw.h
!NO!SUBS!
-if test "X$hostgenerate" != X; then
- $spitshell >>$Makefile <<'!NO!SUBS!'
+# If hostgerenate isn't defined, then we have to build
+# generate_uudmap and run it. This can potentially mean running
+# it on the target system if we're cross-compiling.
+# If it is defined, then we just run it locally.
+case "$hostgenerate" in
+''|'undef')
+$spitshell >>$Makefile <<!GROK!THIS!
+bitcount.h: generate_uudmap\$(HOST_EXE_EXT)
+ $run ./generate_uudmap\$(HOST_EXE_EXT) \$(generated_headers)
+ -@for f in \$(generated_headers); do \\
+ $from \$\$f; \\
+ done
+
+!GROK!THIS!
+
+$spitshell >>$Makefile <<'!NO!SUBS!'
generate_uudmap$(HOST_EXE_EXT): generate_uudmap$(OBJ_EXT)
- -@rm generate_uudmap$(HOST_EXE_EXT)
- $(LNS) $(HOST_GENERATE) generate_uudmap$(HOST_EXE_EXT)
+ $(CC) -o generate_uudmap$(EXE_EXT) $(LDFLAGS) generate_uudmap$(OBJ_EXT) $(libs)
!NO!SUBS!
-else
- $spitshell >>$Makefile <<'!NO!SUBS!'
+;;
+*)
+$spitshell >>$Makefile <<'!NO!SUBS!'
+bitcount.h: generate_uudmap$(HOST_EXE_EXT)
+ ./generate_uudmap$(HOST_EXE_EXT) $(generated_headers)
+
generate_uudmap$(HOST_EXE_EXT): generate_uudmap$(OBJ_EXT)
- $(CC) -o generate_uudmap$(EXE_EXT) $(LDFLAGS) generate_uudmap$(OBJ_EXT) $(libs)
+ -@rm generate_uudmap$(HOST_EXE_EXT)
+ $(LNS) $(HOST_GENERATE) generate_uudmap$(HOST_EXE_EXT)
!NO!SUBS!
-fi
+;;
+esac
+
$spitshell >>$Makefile <<'!NO!SUBS!'
perlmain.c: $(MINIPERL_EXE) ext/ExtUtils-Miniperl/pm_to_blib
# lib/buildcustomize.pl despite the reality that lib/buildcustomize.pl needs
# miniperl to exist first permits us to
# a) have one rule generate both miniperl and lib/buildcustomize.pl
-# (so that lib/buildcustomise.pl is always available. This simplifies things)
+# (so that lib/buildcustomize.pl is always available. This simplifies things)
# b) have the rest of the Makefile depend on the more obvious $(MINIPERL_EXE)
$(MINIPERL_EXE): lib/buildcustomize.pl
$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) write_buildcustomize.pl
-@rm -f miniperl.xok
+!NO!SUBS!
+
+ case $osname in
+ os390) $spitshell >>$Makefile <<'!NO!SUBS!'
+ $(SHRPENV) $(CC) -o perl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(LLIBPERL) $(static_ext) `cat ext.libs` $(libs)
+!NO!SUBS!
+ ;;
+ *) $spitshell >>$Makefile <<'!NO!SUBS!'
$(SHRPENV) $(CC) -o perl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+!NO!SUBS!
+ ;;
+ esac
+
+ $spitshell >>$Makefile <<'!NO!SUBS!'
# Microperl. This is just a convenience thing if one happens to
# build also the full Perl and therefore the real big Makefile:
pod/perlmodlib.pod: $(MINIPERL_EXE) pod/perlmodlib.PL MANIFEST
$(MINIPERL) pod/perlmodlib.PL -q
-pod/perl5199delta.pod: pod/perldelta.pod
- $(RMS) pod/perl5199delta.pod
- $(LNS) perldelta.pod pod/perl5199delta.pod
+pod/perl5232delta.pod: pod/perldelta.pod
+ $(RMS) pod/perl5232delta.pod
+ $(LNS) perldelta.pod pod/perl5232delta.pod
extra.pods: $(MINIPERL_EXE)
-@test ! -f extra.pods || rm -f `cat extra.pods`
for name in all notify silent strip verbose; do
flags="--$name";
+ flags=`echo $flags | sed -e 's/--all//'`
if test "X$hostperl" != X; then
$spitshell >>$Makefile <<EOT
install_$name install-$name: \$(INSTALL_DEPENDENCE) installperl all installman
- \$(HOST_PERL) installperl --destdir=\$(DESTDIR) ${flags%--all} \$(INSTALLFLAGS) \$(STRIPFLAGS)
- \$(HOST_PERL) installman --destdir=\$(DESTDIR) ${flags%--all}
+ \$(HOST_PERL) installperl --destdir=\$(DESTDIR) $flags \$(INSTALLFLAGS) \$(STRIPFLAGS)
+ \$(HOST_PERL) installman --destdir=\$(DESTDIR) $flags
EOT
else
$spitshell >>$Makefile <<EOT
install_$name install-$name: \$(INSTALL_DEPENDENCE) installperl all installman
- \$(RUN_PERL) installperl --destdir=\$(DESTDIR) ${flags%--all} \$(INSTALLFLAGS) \$(STRIPFLAGS)
- \$(RUN_PERL) installman --destdir=\$(DESTDIR) ${flags%--all}
+ \$(RUN_PERL) installperl --destdir=\$(DESTDIR) $flags \$(INSTALLFLAGS) \$(STRIPFLAGS)
+ \$(RUN_PERL) installman --destdir=\$(DESTDIR) $flags
EOT
fi
# DynaLoader may be needed for extensions that use Makefile.PL.
$(DYNALOADER): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary FORCE $(nonxs_ext)
- $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
+ $(MINIPERL) make_ext.pl $@ $(MAKE_EXT_ARGS) MAKE="$(MAKE)" LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
d_dummy $(dynamic_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE $(PERLEXPORT) $(LIBPERL)
- $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
+ $(MINIPERL) make_ext.pl $@ $(MAKE_EXT_ARGS) MAKE="$(MAKE)" LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
s_dummy $(static_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE
- $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
+ $(MINIPERL) make_ext.pl $@ $(MAKE_EXT_ARGS) MAKE="$(MAKE)" LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
n_dummy $(nonxs_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary FORCE
- $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+ $(MINIPERL) make_ext.pl $@ $(MAKE_EXT_ARGS) MAKE="$(MAKE)" LIBPERL_A=$(LIBPERL)
!NO!SUBS!
$spitshell >>$Makefile <<EOF
realclean _realcleaner clobber _clobber \
distclean veryclean _verycleaner
-clean: _tidy _mopup
+clean: realclean
realclean: _realcleaner _mopup
@echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh"
-rm -rf host
rm -f t/test_state
rm -f config.sh cppstdin Policy.sh extras.lst
+ rm -f $(MANIFEST_SRT)
clobber: _realcleaner _mopup _clobber
-rm -f $(PERL_EXE) $(MINIPERL_EXE) $(LIBPERL) libperl.* microperl
-rm -f config.arch config.over $(DTRACE_H)
-# Do not 'make _tidy' directly.
-_tidy:
- -cd pod; $(LDLIBPTH) $(MAKE) clean
- -cd utils; $(LDLIBPTH) $(MAKE) clean
- -cd x2p; $(LDLIBPTH) $(MAKE) clean
- -rm -f lib/Config_git.pl git_version.h
- -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
- $(MINIPERL) make_ext.pl --target=clean $$x MAKE=$(MAKE) ; \
- done
-
_cleaner1:
-cd os2; rm -f Makefile
-cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN)
-cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN)
- -cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN)
-@if test -f $(MINIPERL_EXE) ; then \
for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
- $(MINIPERL) make_ext.pl --target=$(CLEAN) $$x MAKE=$(MAKE) ; \
+ $(MINIPERL) make_ext.pl --target=$(CLEAN) $$x MAKE="$(MAKE)" ; \
done ; \
else \
sh $(CLEAN).sh ; \
rm -rf pod/perlfunc pod/perlipc
-rmdir ext/B/lib
rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
- -rmdir lib/version lib/threads lib/inc/latest lib/inc lib/encoding
- -rmdir lib/autodie/exception lib/autodie lib/XS lib/Win32API lib/VMS
+ -rmdir lib/version lib/threads lib/encoding lib/autodie/exception
+ -rmdir lib/autodie/Scope lib/autodie lib/XS lib/Win32API lib/VMS
-rmdir lib/Unicode/Collate/Locale lib/Unicode/Collate/CJK
-rmdir lib/Unicode/Collate lib/Tie/Hash lib/Thread lib/Text
- -rmdir lib/Test/Builder/Tester lib/Test/Builder lib/Test lib/Term
+ -rmdir lib/Test/use lib/Test/Tester lib/Test/Builder/Tester
+ -rmdir lib/Test/Builder/IO lib/Test/Builder lib/Test lib/Term
-rmdir lib/TAP/Parser/YAMLish lib/TAP/Parser/SourceHandler
-rmdir lib/TAP/Parser/Scheduler lib/TAP/Parser/Result
-rmdir lib/TAP/Parser/Iterator lib/TAP/Parser lib/TAP/Harness
-rmdir lib/TAP/Formatter/File lib/TAP/Formatter/Console
- -rmdir lib/TAP/Formatter lib/TAP lib/Sys/Syslog lib/Sys lib/Search
- -rmdir lib/Scalar lib/Pod/Text lib/Pod/Simple lib/Pod/Perldoc
- -rmdir lib/PerlIO/via lib/PerlIO lib/Perl lib/Parse/CPAN lib/Parse
- -rmdir lib/Params lib/Package lib/Net/FTP lib/Module/Load
- -rmdir lib/Module/CoreList lib/Module/Build/Platform lib/Module/Build
- -rmdir lib/Module lib/Memoize lib/Math/BigInt lib/Math/BigFloat
- -rmdir lib/Math lib/MIME lib/Locale/Maketext lib/Locale/Codes
- -rmdir lib/Locale lib/List/Util lib/List lib/JSON/PP lib/JSON lib/IPC
- -rmdir lib/IO/Uncompress/Adapter lib/IO/Uncompress lib/IO/Socket
- -rmdir lib/IO/Compress/Zlib lib/IO/Compress/Zip lib/IO/Compress/Gzip
- -rmdir lib/IO/Compress/Base lib/IO/Compress/Adapter lib/IO/Compress
- -rmdir lib/IO lib/I18N/LangTags lib/I18N lib/Hash/Util lib/Hash
- -rmdir lib/HTTP lib/Filter/Util lib/Filter lib/File/Spec
- -rmdir lib/ExtUtils/Typemaps lib/ExtUtils/ParseXS
+ -rmdir lib/TAP/Formatter lib/TAP lib/Sys/Syslog lib/Sys lib/Sub
+ -rmdir lib/Search lib/Scalar lib/Pod/Text lib/Pod/Simple
+ -rmdir lib/Pod/Perldoc lib/PerlIO/via lib/PerlIO lib/Perl
+ -rmdir lib/Parse/CPAN lib/Parse lib/Params lib/Net/FTP lib/Module/Load
+ -rmdir lib/Module/CoreList lib/Module lib/Memoize lib/Math/BigInt
+ -rmdir lib/Math/BigFloat lib/Math lib/MIME lib/Locale/Maketext
+ -rmdir lib/Locale/Codes lib/Locale lib/List/Util lib/List lib/JSON/PP
+ -rmdir lib/JSON lib/IPC lib/IO/Uncompress/Adapter lib/IO/Uncompress
+ -rmdir lib/IO/Socket lib/IO/Compress/Zlib lib/IO/Compress/Zip
+ -rmdir lib/IO/Compress/Gzip lib/IO/Compress/Base
+ -rmdir lib/IO/Compress/Adapter lib/IO/Compress lib/IO
+ -rmdir lib/I18N/LangTags lib/I18N lib/Hash/Util lib/Hash lib/HTTP
+ -rmdir lib/Filter/Util lib/Filter lib/File/Spec lib/ExtUtils/Typemaps
+ -rmdir lib/ExtUtils/ParseXS lib/ExtUtils/MakeMaker/version
-rmdir lib/ExtUtils/MakeMaker lib/ExtUtils/Liblist
-rmdir lib/ExtUtils/Constant lib/ExtUtils/Command
-rmdir lib/ExtUtils/CBuilder/Platform/Windows
-rmdir lib/Exporter lib/Encode/Unicode lib/Encode/MIME/Header
-rmdir lib/Encode/MIME lib/Encode/KR lib/Encode/JP lib/Encode/CN
-rmdir lib/Encode lib/Digest lib/Devel lib/Data lib/Config/Perl
- -rmdir lib/Compress/Raw lib/Compress lib/Carp lib/CPAN/Meta
- -rmdir lib/CPAN/LWP lib/CPAN/Kwalify lib/CPAN/HTTP lib/CPAN/FTP
- -rmdir lib/CPAN/Exception lib/CPAN/API lib/CPAN lib/CGI lib/Attribute
- -rmdir lib/Archive/Tar lib/Archive lib/App/Prove/State/Result
- -rmdir lib/App/Prove/State lib/App/Prove lib/App
+ -rmdir lib/Compress/Raw lib/Compress lib/Carp lib/CPAN/Plugin
+ -rmdir lib/CPAN/Meta/History lib/CPAN/Meta lib/CPAN/LWP
+ -rmdir lib/CPAN/Kwalify lib/CPAN/HTTP lib/CPAN/FTP lib/CPAN/Exception
+ -rmdir lib/CPAN/API lib/CPAN lib/Attribute lib/Archive/Tar lib/Archive
+ -rmdir lib/App/Prove/State/Result lib/App/Prove/State lib/App/Prove
+ -rmdir lib/App
_realcleaner:
@$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=distclean
$spitshell >>$Makefile <<'!NO!SUBS!'
.PHONY: depend
-depend: makedepend
- sh ./makedepend MAKE=$(MAKE) cflags
+depend: makedepend $(DTRACE_H) $(generated_headers)
+ sh ./makedepend MAKE="$(MAKE)" cflags
.PHONY: test check test_prep test_prep_nodll test_prep_pre \
test_prep_reonly test_tty test-tty test_notty test-notty \
case "$targethost" in
'') $spitshell >>$Makefile <<'!NO!SUBS!'
test_prep test-prep: test_prep_pre $(MINIPERL_EXE) $(unidatafiles) $(PERL_EXE) \
- $(dynamic_ext) $(TEST_PERL_DLL) runtests x2p/s2p x2p/find2perl \
- $(generated_pods)
+ $(dynamic_ext) $(TEST_PERL_DLL) runtests $(generated_pods)
cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE))
!NO!SUBS!
;;
*) $spitshell >>$Makefile <<!GROK!THIS!
test_prep test-prep: test_prep_pre \$(MINIPERL_EXE) \$(unidatafiles) \$(PERL_EXE) \
- \$(dynamic_ext) \$(TEST_PERL_DLL) runtests x2p/s2p x2p/find2perl \
+ \$(dynamic_ext) \$(TEST_PERL_DLL) runtests \
\$(generated_pods)
$to libperl.*
$to t/*
$to cpan/*/t
$to dist/*/t
$to ext/*/t
+ $to cpan/Archive-Tar/*
+ $to cpan/Module-Metadata/*
$to cpan/Term-Cap/test.pl
$to cpan/Pod-Usage/*
$to cpan/Pod-Parser/*
$to config_h.SH
$to perl.h
$to cflags
-# --- For Module::Build
- $to cpan/Module-Build/lib/*
$to *.h
-# --- For t/x2p/s2p.t
- $to x2p
+# --- For t/porting/customized.t
+ $to vutil.c
+ $to vxs.inc
+# --- For t/TEST
+ $to config.sh
# --- For lib/diagnostics.t with -Duseshrplib
$to \$(PERL_EXE)
cd t && (rm -f \$(PERL_EXE); \$(LNS) ../\$(PERL_EXE) \$(PERL_EXE)) && cd ..
$spitshell >>$Makefile <<'!NO!SUBS!'
test_prep_reonly: $(MINIPERL_EXE) $(PERL_EXE) $(dynamic_ext_re) $(TEST_PERL_DLL)
- $(MINIPERL) make_ext.pl $(dynamic_ext_re) MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
+ $(MINIPERL) make_ext.pl $(dynamic_ext_re) MAKE="$(MAKE)" LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE))
!NO!SUBS!
*) $spitshell >>$Makefile <<!GROK!THIS!
test check: test_prep
- $run -cwd $targetdir/t -env LD_LIBRARY_PATH=$targetdir:$targetdir/lib:$targetdir/lib/auto ./TEST
+ $run -cwd $targetdir/t -env "$targetenv LD_LIBRARY_PATH=$targetdir:$targetdir/lib:$targetdir/lib/auto:\$\$LD_LIBRARY_PATH" ./TEST
!GROK!THIS!
;;
@grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
@echo "And of course you have to have valgrind..."
$(VALGRIND) $(VG_TEST) || exit 1
- PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(RUN_TESTS) choose
+ PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' TESTFILE=harness $(RUN_TESTS) choose
!NO!SUBS!
;;
esac
@echo "to build lib/Config.pm, or the Unicode data files."
@echo " "
- cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE)) \
- && $(RUN_PERL) TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t opbasic/*.t op/*.t uni/*.t </dev/tty
+ && $(RUN_PERL) TEST base/*.t comp/*.t cmd/*.t run/*.t \
+ io/*.t re/*.t opbasic/*.t op/*.t uni/*.t perf/*.t \
+ </dev/tty
# Test via harness
echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2
case "$osname" in
os390|posix-bc)
- if cd x2p
- then
- rm -f y.tab.c y.tab.h
- case "$osname" in
- posix-bc)
- # we are using two different yaccs in BS2000 Posix!
- byacc a2p.y >/dev/null 2>&1
- ;;
- *) # e.g. os390
- yacc a2p.y >/dev/null 2>&1
- ;;
- esac
- if cmp -s y.tab.c a2p.c
- then
- rm -f y.tab.c
- else
- echo "a2p.y -> a2p.c" >&2
- mv -f y.tab.c a2p.c
- chmod u+w a2p.c
- sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
- -e 's|^static void __YY_YACC_MAIN.*BS2000.*|/*static main deleted*/|' \
- -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c
- xxx="$xxx a2p.c"
- fi
- # In case somebody yacc -d:ed the a2p.y.
- if test -f y.tab.h
- then
- if cmp -s y.tab.h a2p.h
- then
- rm -f y.tab.h
- else
- echo "a2p.h -> a2p.h" >&2
- mv -f y.tab.h a2p.h
- xxx="$xxx a2p.h"
- fi
- fi
- cd ..
- fi
;;
*)
echo "'$osname' is an EBCDIC system I don't know that well." >&4
https://perl5.git.perl.org / perl5.git / blobdiff