# original from Krishna Sethuraman, krishna@sgi.com
#
# Modified Mon Jul 22 14:52:25 EDT 1996
-# Andy Dougherty <doughera@lafcol.lafayette.edu>
+# Andy Dougherty <doughera@lafayette.edu>
# with help from Dean Roehrich <roehrich@cray.com>.
# cc -n32 update info from Krishna Sethuraman, krishna@sgi.com.
# additional update from Scott Henry, scotth@sgi.com
# - tries to check for various compiler versions and do the right
# thing when it can
# - warnings turned off (-n32 messages):
-# 1116 - non-void function should return a value
-# 1048 - cast between pointer-to-object and pointer-to-function
-# 1042 - operand types are incompatible
+# 1184 - "=" is used where where "==" may have been intended
+# 1552 - variable "foo" set but never used
# Tweaked by Chip Salzenberg <chip@perl.com> on 5/13/97
# - don't assume 'cc -n32' if the n32 libm.so is missing
# gcc-enabled by Kurt Starsinic <kstar@isinet.com> on 3/24/1998
+# 64-bitty by Jarkko Hietaniemi on 9/1998
+
+# Martin Pool added -shared for gcc on 2004-01-27
+
# Use sh Configure -Dcc='cc -n32' to try compiling with -n32.
# or -Dcc='cc -n32 -mips3' (or -mips4) to force (non)portability
# Don't bother with -n32 unless you have the 7.1 or later compilers.
# But there's no quick and light-weight way to check in 6.2.
+# NOTE: some IRIX cc versions, e.g. 7.3.1.1m (try cc -version) have
+# been known to have issues (coredumps) when compiling perl.c.
+# If you've used -OPT:fast_io=ON and this happens, try removing it.
+# If that fails, or you didn't use that, then try adjusting other
+# optimization options (-LNO, -INLINE, -O3 to -O2, etcetera).
+# The compiler bug has been reported to SGI.
+# -- Allen Smith <allens@cpan.org>
+
+# Modified (10/30/04) to turn off usemallocwrap (PERL_MALLOC_WRAP) in -n32
+# mode - Allen.
+
+case "$use64bitall" in
+$define|true|[yY]*)
+ case "`uname -s`" in
+ IRIX)
+ cat <<END >&2
+You have asked for use64bitall but you aren't running on 64-bit IRIX.
+I'll try changing it to use64bitint.
+END
+ use64bitall="$undef"
+
+ case "`uname -r`" in
+ [1-5]*|6.[01])
+ cat <<END >&2
+Sorry, can't do use64bitint either. Try upgrading to IRIX 6.2 or later.
+END
+ use64bitint="$undef"
+ ;;
+ *) use64bitint="$define"
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+# Until we figure out what to be probed for in Configure (ditto for hpux.sh)
+case "$usemorebits" in # Need to expand this now, then.
+$define|true|[yY]*)
+ case "`uname -r`" in
+ [1-5]*|6.[01])
+ uselongdouble="$define"
+ ;;
+ *) use64bitint="$define" uselongdouble="$define" ;;
+ esac
+esac
+
# Let's assume we want to use 'cc -n32' by default, unless the
# necessary libm is missing (which has happened at least twice)
case "$cc" in
-'')
- if test -f /usr/lib32/libm.so
- then
- cc='cc -n32'
- fi ;;
+'') case "$use64bitall" in
+ "$define"|true|[yY]*) test -f /usr/lib64/libm.so && cc='cc -64' ;;
+ *) test -f /usr/lib32/libm.so && cc='cc -n32' ;;
+ esac
+esac
+
+case "$use64bitint" in
+ "$define"|true|[yY]*) ;;
+ *) d_casti32="$undef" ;;
+esac
+
+cc=${cc:-cc}
+cat=${cat:-cat}
+
+$cat > UU/cc.cbu <<'EOCCBU'
+# This script UU/cc.cbu will get 'called-back' by Configure after it
+# has prompted the user for the C compiler to use.
+
+case "$cc" in
+*gcc*) ;;
+*) ccversion=`cc -version 2>&1` ;;
esac
# Check for which compiler we're using
case "$cc" in
*"cc -n32"*)
+ test -z "$ldlibpthname" && ldlibpthname='LD_LIBRARYN32_PATH'
- # Check for which version of the compiler we're running
- case "`$cc -version 2>&1`" in
- *7.0*) # Mongoose 7.0
- ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -woff 1009,1042,1048,1110,1116,1184 -OPT:Olimit=0"
- optimize='none'
- ;;
- *7.*) # Mongoose 7.1+
- ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -woff 1009,1110,1184 -OPT:Olimit=0"
- optimize='-O3'
- ;;
- *6.2*) # Ragnarok 6.2
- ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -woff 1009,1110,1184"
- optimize='none'
- ;;
- *) # Be safe and not optimize
- ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -woff 1009,1110,1184 -OPT:Olimit=0"
- optimize='none'
- ;;
- esac
+ # If a library is requested to link against, make sure the
+ # objects in the library are of the same ABI we are compiling
+ # against. Albert Chin-A-Young <china@thewrittenword.com>
+
+ # In other words, you no longer have to worry regarding having old
+ # library paths (/usr/lib) in the searchpath for -n32 or -64; thank
+ # you very much, Albert! Now if we could just get more module authors
+ # to use something like this... - Allen
+
+ libscheck='case "$xxx" in
+*.a) /bin/ar p $xxx `/bin/ar t $xxx | sed q` >$$.o;
+ case "`/usr/bin/file $$.o`" in
+ *N32*) rm -f $$.o ;;
+ *) rm -f $$.o; xxx=/no/n32$xxx ;;
+ esac ;;
+*) case "`/usr/bin/file $xxx`" in
+ *N32*) ;;
+ *) xxx=/no/n32$xxx ;;
+ esac ;;
+esac'
- ld=ld
- ldflags=' -L/usr/local/lib -L/usr/lib32 -L/lib32'
+ # NOTE: -L/usr/lib32 -L/lib32 are automatically selected by the linker
+ test -z "$ldflags" && ldflags=' -L/usr/local/lib32 -L/usr/local/lib'
cccdlflags=' '
# From: David Billinghurst <David.Billinghurst@riotinto.com.au>
# If you get complaints about so_locations then change the following
# line to something like:
# lddlflags="-n32 -shared -check_registry /usr/lib32/so_locations"
- lddlflags="-n32 -shared"
- libc='/usr/lib32/libc.so'
- plibpth='/usr/lib32 /lib32 /usr/ccs/lib'
- nm_opt='-p'
- nm_so_opt='-p'
+ test -z "$lddlflags" && lddlflags="-n32 -shared"
+ test -z "$libc" && libc='/usr/lib32/libc.so'
+ test -z "$plibpth" && plibpth='/usr/lib32 /lib32 /usr/ccs/lib'
+
+ # PERL_MALLOC_WRAP gives false alarms ("panic: memory wrap") in IRIX
+ # -n32 mode, resulting in perl compiles never getting further than
+ # miniperl. I am not sure whether it actually does any good in -32 or
+ # -64 mode, especially the latter, but it does not give false
+ # alarms (in testing). -Allen
+
+ usemallocwrap=${usemallocwrap:-false}
+ ;;
+*"cc -64"*)
+ case "`uname -s`" in
+ IRIX)
+ $cat >&4 <<EOM
+You cannot use cc -64 or -Duse64bitall in 32-bit IRIX, sorry.
+Cannot continue, aborting.
+EOM
+ exit 1
+ ;;
+ esac
+ test -z "$ldlibpthname" && ldlibpthname='LD_LIBRARY64_PATH'
+ test -z "$use64bitall" && use64bitall="$define"
+ test -z "$use64bitint" && use64bitint="$define"
+ loclibpth="$loclibpth /usr/lib64"
+ libscheck='case "`/usr/bin/file $xxx`" in
+*64-bit*) ;;
+*) xxx=/no/64-bit$xxx ;;
+esac'
+ # NOTE: -L/usr/lib64 -L/lib64 are automatically selected by the linker
+ test -z "$ldflags" && ldflags=' -L/usr/local/lib64 -L/usr/local/lib'
+ cccdlflags=' '
+ test -z "$archname64" && archname64='64all'
+ # From: David Billinghurst <David.Billinghurst@riotinto.com.au>
+ # If you get complaints about so_locations then change the following
+ # line to something like:
+ # lddlflags="-64 -shared -check_registry /usr/lib64/so_locations"
+ test -z lddlflags="-64 -shared"
+ test -z "$libc" && libc='/usr/lib64/libc.so'
+ test -z "$plibpth" && plibpth='/usr/lib64 /lib64 /usr/ccs/lib'
;;
*gcc*)
- ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -D_POSIX_C_SOURCE"
- optimize="-O3"
+ ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME"
+ test -z "$optimize" && optimize="-O3"
usenm='undef'
+ # It seems gcc can build Irix shlibs, but of course it needs
+ # -shared. Otherwise you get link errors looking for main().
+ lddlflags="$lddlflags -shared"
+ case "`uname -s`" in
+ # Without the -mabi=64 gcc in 64-bit IRIX has problems passing
+ # and returning small structures. This affects inet_*() and semctl().
+ # See http://groups.google.com/group/comp.sys.sgi.admin/msg/3ad8353bc4ce3cb0
+ # for more information. Reported by Lionel Cons <lionel.cons@cern.ch>.
+ IRIX64) ccflags="$ccflags -mabi=64"
+ ldflags="$ldflags -mabi=64 -L/usr/lib64"
+ lddlflags="$lddlflags -mabi=64"
+ ;;
+ *) ccflags="$ccflags -DIRIX32_SEMUN_BROKEN_BY_GCC"
+ # XXX Note: It is possible that turning off usemallocwrap is
+ # needed here; insufficient data! - Allen
+ ;;
+ esac
;;
*)
# this is needed to force the old-32 paths
;;
esac
-# We don't want these libraries. Anyone know why?
-set `echo X "$libswanted "|sed -e 's/ socket / /' -e 's/ nsl / /' -e 's/ dl / /'`
+# Settings common to both native compiler modes.
+case "$cc" in
+*"cc -n32"*|*"cc -64"*)
+ test -z "$ld" && ld=$cc
+
+ # perl's malloc can return improperly aligned buffer
+ # which (under 5.6.0RC1) leads into really bizarre bus errors
+ # and freak test failures (lib/safe1 #18, for example),
+ # even more so with -Duse64bitall: for example lib/io_linenumtb.
+ # fails under the harness but succeeds when run separately,
+ # under make test pragma/warnings #98 fails, and lib/io_dir
+ # apparently coredumps (the last two don't happen under
+ # the harness. Helmut Jarausch is seeing bus errors from
+ # miniperl, as was Scott Henry with snapshots from just before
+ # the RC1. --jhi
+ usemymalloc='undef'
+
+ # Was at the first of the line - Allen
+ #malloc_cflags='ccflags="-DSTRICT_ALIGNMENT $ccflags"'
+
+ nm_opt="$nm_opt -p"
+ nm_so_opt="$nm_so_opt -p"
+
+ # Warnings to turn off because the source code hasn't
+ # been cleaned up enough yet to satisfy the IRIX cc.
+ # 1184: "=" is used where where "==" may have been intended.
+ # 1552: The variable "foobar" is set but never used.
+ woff=1184,1552
+
+ # Perl 5.004_57 introduced new qsort code into pp_ctl.c that
+ # makes IRIX cc prior to 7.2.1 to emit bad code.
+ # so some serious hackery follows to set pp_ctl flags correctly.
+
+ # Check for which version of the compiler we're running
+ case "`$cc -version 2>&1`" in
+ *7.0*) # Mongoose 7.0
+ ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -woff $woff -OPT:Olimit=0"
+ optimize='none'
+ ;;
+ *7.1*|*7.2|*7.20) # Mongoose 7.1+
+ ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -woff $woff"
+ case "$optimize" in
+ '') optimize='-O3 -OPT:Olimit=0' ;;
+ '-O') optimize='-O3 -OPT:Olimit=0' ;;
+ *) ;;
+ esac
+
+ # This is a temporary fix for 5.005+.
+ # See hints/README.hints, especially the section
+ # =head2 Propagating variables to config.sh
+
+ # Note the part about case statements not working without
+ # weirdness like the below echo statement... and, since
+ # we're in a callback unit, it's to config.sh, not UU/config.sh
+ # - Allen
+
+
+ pp_ctl_cflags="$pp_ctl_flags optimize=\"$optimize -O1\""
+ echo "pp_ctl_cflags=\"$pp_ctl_flags optimize=\\\"\$optimize -O1\\\"\"" >> config.sh
+ ;;
+
+
+
+# XXX What is space=ON doing in here? Could someone ask Scott Henry? - Allen
+
+ *7.*) # Mongoose 7.2.1+
+ ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -woff $woff"
+ case "$optimize" in
+ '') optimize='-O3 -OPT:Olimit=0:space=ON' ;;
+ '-O') optimize='-O3 -OPT:Olimit=0:space=ON' ;;
+ *) ;;
+ esac
+ ;;
+ *6.2*) # Ragnarok 6.2
+ ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -woff $woff"
+ optimize='none'
+ ;;
+ *) # Be safe and not optimize
+ ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -woff $woff"
+ optimize='none'
+ ;;
+ esac
+
+# this is to accommodate the 'modules' capability of the
+# 7.2 MIPSPro compilers, which allows for the compilers to be installed
+# in a nondefault location. Almost everything works as expected, but
+# /usr/include isn't caught properly. Hence see the /usr/include/pthread.h
+# change below to include TOOLROOT (a modules environment variable),
+# and the following code. Additional
+# code to accommodate the 'modules' environment should probably be added
+# here if possible, or be inserted as a ${TOOLROOT} reference before
+# absolute paths (again, see the pthread.h change below).
+# -- krishna@sgi.com, 8/23/98
+
+ if [ "X${TOOLROOT}" != "X" ]; then
+ # we cant set cppflags because it gets overwritten
+ # we dont actually need $TOOLROOT/usr/include on the cc line cuz the
+ # modules functionality already includes it but
+ # XXX - how do I change cppflags in the hints file?
+ ccflags="$ccflags -I${TOOLROOT}/usr/include"
+ usrinc="${TOOLROOT}/usr/include"
+ fi
+
+ ;;
+esac
+
+# workaround for an optimizer bug
+# Made to work via UU/config.sh thing (or, rather, config.sh, since we're in
+# a callback) from README.hints, plus further stuff; doesn't handle -g still,
+# unfortunately - Allen
+case "`$cc -version 2>&1`" in
+*7.2.*)
+ test -z "$op_cflags" && echo "op_cflags=\"optimize=\\\"\$optimize -O1\\\"\"" >> config.sh
+ test -z "$op_cflags" && op_cflags="optimize=\"\$optimize -O1\""
+ test -z "$opmini_cflags" && echo "opmini_cflags=\"optimize=\\\"\$optimize -O1\\\"\"" >> config.sh
+ test -z "$opmini_cflags" && opmini_cflags="optimize=\"\$optimize -O1\""
+ ;;
+*7.3.1.*)
+ test -z "$op_cflags" && echo "op_cflags=\"optimize=\\\"\$optimize -O2\\\"\"" >> config.sh
+ test -z "$op_cflags" && op_cflags="$op_cflags optimize=\"\$optimize -O2\""
+ test -z "$opmini_cflags" && echo "opmini_cflags=\"optimize=\\\"\$optimize -O2\\\"\"" >> config.sh
+ test -z "$opmini_cflags" && opmini_cflags="optimize=\"\$optimize -O2\""
+ ;;
+esac
+
+
+# Workaround [perl #33849]: perl 5.8.6 fails to build on IRIX 6.5 due to
+# bizarre preprocessor bug: cc -E - unfortunately goes into K&R mode, but
+# cc -E file.c doesn't. Force a wrapper to always get the ANSI mode.
+# (We only need to do this for cc, not for gcc. ccversion is computed above.)
+case "$ccversion" in
+'') ;; # gcc. Do nothing.
+*) # Inside this call-back unit, we are down in the UU/ subdirectory,
+ # but Configure will look for cppstdin one level up.
+ cd ..; cppstdin=`pwd`/cppstdin; cd UU
+ cpprun="$cppstdin"
+ ;;
+esac
+
+EOCCBU
+
+# End of cc.cbu callback unit. - Allen
+
+# We don't want these libraries.
+# Socket networking is in libc, these are not installed by default,
+# and just slow perl down. (scotth@sgi.com)
+# librt contains nothing we need (some places need it for Time::HiRes) --jhi
+set `echo X "$libswanted "|sed -e 's/ socket / /' -e 's/ nsl / /' -e 's/ dl / /' -e 's/ rt / /'`
shift
libswanted="$*"
# I have conflicting reports about the sun, crypt, bsd, and PW
# libraries on Irix 6.2.
#
-# One user rerports:
+# One user reports:
# Don't need sun crypt bsd PW under 6.2. You *may* need to link
# with these if you want to run perl built under 6.2 on a 5.3 machine
# (I haven't checked)
# you need is in libc. You do also need '-lbsd' if you choose not
# to use the -D_BSD_* defines. Note that as of 6.2 the only
# difference between '-lmalloc' and '-lc' malloc is the debugging
-# and control calls. -- scotth@sgi.com
+# and control calls, which aren't used by perl. -- scotth@sgi.com
-set `echo X "$libswanted "|sed -e 's/ sun / /' -e 's/ crypt / /' -e 's/ bsd / /' -e 's/ PW / /'`
+set `echo X "$libswanted "|sed -e 's/ sun / /' -e 's/ crypt / /' -e 's/ bsd / /' -e 's/ PW / /' -e 's/ malloc / /'`
shift
libswanted="$*"
-# Perl 5.004_57 introduced new qsort code into pp_ctl.c that
-# makes IRIX 6.2 cc to emit bad code.
-pp_ctl_cflags='optimize=-O'
-
-if [ "X$usethreads" = "X$define" ]; then
- if test ! -f /usr/include/pthread.h -o ! -f /usr/lib/libpthread.so; then
- uname_r=`uname -r`
- case "`uname -r`" in
- 6.0|6.1)
- echo >&4 "IRIX $uname_r does not have the POSIX threads."
- echo >&4 "You should upgrade to at least IRIX 6.3."
- echo >&4 "Cannot continue, aborting."
- exit 1
- ;;
- 6.2)
- echo >&4 ""
-cat >&4 <<EOF
-IRIX 6.2 $uname_r can have the POSIX threads.
-The following IRIX patches must, however, be installed:
+# libbind.{so|a} would be from a BIND/named installation - IRIX 6.5.* has
+# pretty much everything that would be useful in libbind in libc, including
+# accessing a local caching server (nsd) that will also look in /etc/hosts,
+# NIS (yuck!), etcetera. libbind also doesn't have the _r (thread-safe
+# reentrant) functions.
+# - Allen <easmith@beatrice.rutgers.edu>
+
+case "`uname -r`" in
+6.5)
+ set `echo X "$libswanted "|sed -e 's/ bind / /'`
+ shift
+ libswanted="$*"
+ ;;
+esac
+# Don't groan about unused libraries.
+case "$ldflags" in
+ *-Wl,-woff,84*) ;;
+ *) ldflags="$ldflags -Wl,-woff,84" ;;
+esac
+
+# Irix 6.5.6 seems to have a broken header <sys/mode.h>
+# don't include that (it doesn't contain S_IFMT, S_IFREG, et al)
+
+i_sysmode="$undef"
+
+$cat > UU/usethreads.cbu <<'EOCBU'
+# This script UU/usethreads.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to use threads.
+case "$usethreads" in
+$define|true|[yY]*)
+ if test ! -f ${TOOLROOT}/usr/include/pthread.h -o ! -f /usr/lib/libpthread.so; then
+ case "`uname -r`" in
+ [1-5].*|6.[01])
+ cat >&4 <<EOM
+IRIX `uname -r` does not support POSIX threads.
+You should upgrade to at least IRIX 6.2 with pthread patches.
+EOM
+ ;;
+ 6.2)
+ cat >&4 <<EOM
+IRIX 6.2 can have the POSIX threads.
+However, the following IRIX patches (or their replacements) MUST be installed:
1404 Irix 6.2 Posix 1003.1b man pages
1645 IRIX 6.2 & 6.3 POSIX header file updates
2000 Irix 6.2 Posix 1003.1b support modules
Without patch 2401, a kernel bug in IRIX 6.2 will
cause your machine to panic and crash when running
threaded perl. IRIX 6.3 and up should be OK.
+EOM
+ ;;
+ [67].*)
+ cat >&4 <<EOM
+IRIX `uname -r` should have the POSIX threads.
+But, somehow, you do not seem to have them installed.
+EOM
+ ;;
+ esac
+ cat >&4 <<EOM
+Cannot continue, aborting.
+EOM
+ exit 1
+ fi
+ set `echo X "$libswanted "| sed -e 's/ c / pthread /'`
+ shift
+ libswanted="$*"
+
+ usemymalloc='n'
+
+ # These are hidden behind a _POSIX1C ifdef that would
+ # require including <pthread.h> for the Configure hasproto
+ # to see these.
+
+# d_asctime_r_proto="$define"
+# d_ctime_r_proto="$define"
+# d_gmtime_r_proto="$define"
+# d_localtime_r_proto="$define"
+ # Safer just to go ahead and include it, for other ifdefs like them
+ # (there are a lot, such as in netdb.h). - Allen
+ ccflags="$ccflags -DPTHREAD_H_FIRST"
+ pthread_h_first="$define"
+ echo "pthread_h_first='define'" >> config.sh
+
+ ;;
+
+esac
+EOCBU
+
+# The -n32 makes off_t to be 8 bytes, so we should have largefileness.
+
+$cat > UU/use64bitint.cbu <<'EOCBU'
+# This script UU/use64bitint.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to use 64 bit integers.
+
+case "$use64bitint" in
+$define|true|[yY]*)
+ case "`uname -r`" in
+ [1-5]*|6.[01])
+ cat >&4 <<EOM
+IRIX `uname -r` does not support 64-bit types.
+You should upgrade to at least IRIX 6.2.
Cannot continue, aborting.
-EOF
- exit 1
- ;;
- 6.*|7.*)
- echo >&4 "IRIX $uname_r should have the POSIX threads."
- echo >&4 "But somehow you do not seem to have them installed."
- echo >&4 "Cannot continue, aborting."
- exit 1
- ;;
- esac
- unset uname_r
+EOM
+ exit 1
+ ;;
+ esac
+ usemymalloc="$undef"
+ ;;
+*) d_casti32="$undef" ;;
+esac
+
+EOCBU
+
+$cat > UU/use64bitall.cbu <<'EOCBU'
+# This script UU/use64bitall.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to be maximally 64 bitty.
+
+case "$use64bitall" in
+$define|true|[yY]*)
+ case "$cc" in
+ *-n32*|*-32*)
+ cat >&4 <<EOM
+You cannot use a non-64 bit cc for -Duse64bitall, sorry.
+Cannot continue, aborting.
+EOM
+ exit 1
+ ;;
+ esac
+ ;;
+esac
+
+EOCBU
+
+$cat > UU/uselongdouble.cbu <<'EOCBU'
+# This script UU/uselongdouble.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to use long doubles.
+
+# This script is designed to test IRIX (and other machines, once it's put into
+# Configure) for a bug in which they fail to round correctly when using
+# sprintf/printf/etcetera on a long double with precision specified (%.0Lf or
+# whatever). Sometimes, this only happens when the number in question is
+# between 1 and -1, weirdly enough. - Allen
+
+case "$uselongdouble" in
+$define|true|[yY]*)
+
+case "$d_PRIfldbl" in
+$define|true|[yY]*)
+
+ echo " " >try.c
+ $cat >>try.c <<EOP
+#include <stdio.h>
+
+#define sPRIfldbl $sPRIfldbl
+
+#define I_STDLIB $i_stdlib
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+
+int main()
+{
+ char buf1[64];
+ char buf2[64];
+ buf1[63] = '\0';
+ buf2[63] = '\0';
+
+ (void)sprintf(buf1,"%.0"sPRIfldbl,(long double)0.6L);
+ (void)sprintf(buf2,"%.0f",(double)0.6);
+ if (strcmp(buf1,buf2)) {
+ exit(1);
+ }
+ (void)sprintf(buf1,"%.0"sPRIfldbl,(long double)-0.6L);
+ (void)sprintf(buf2,"%.0f",(double)-0.6);
+ if (strcmp(buf1,buf2)) {
+ exit(1);
+ } else {
+ exit(0);
+ }
+}
+
+EOP
+
+ set try
+ if eval $compile && $run ./try; then
+ rm -f try try.* >/dev/null
+ else
+ rm -f try try.* core a.out >/dev/null
+ ccflags="$ccflags -DHAS_LDBL_SPRINTF_BUG"
+ cppflags="$cppflags -DHAS_LDBL_SPRINTF_BUG"
+
+ echo " " >try.c
+ $cat >>try.c <<EOP
+#include <stdio.h>
+
+#define sPRIfldbl $sPRIfldbl
+
+#define I_STDLIB $i_stdlib
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+
+int main()
+{
+ char buf1[64];
+ char buf2[64];
+ buf1[63] = '\0';
+ buf2[63] = '\0';
+
+ (void)sprintf(buf1,"%.0"sPRIfldbl,(long double)1.6L);
+ (void)sprintf(buf2,"%.0f",(double)1.6);
+ if (strcmp(buf1,buf2)) {
+ exit(1);
+ }
+ (void)sprintf(buf1,"%.0"sPRIfldbl,(long double)-1.6L);
+ (void)sprintf(buf2,"%.0f",(double)-1.6);
+ if (strcmp(buf1,buf2)) {
+ exit(1);
+ } else {
+ exit(0);
+ }
+}
+
+EOP
+
+ set try
+ if eval $compile && $run ./try; then
+ rm -f try try.c >/dev/null
+ ccflags="$ccflags -DHAS_LDBL_SPRINTF_BUG_LESS1"
+ cppflags="$cppflags -DHAS_LDBL_SPRINTF_BUG_LESS1"
+ else
+ rm -f try try.c core try.o a.out >/dev/null
+ fi
fi
- # -lpthread needs to come before -lc but after other libraries such
- # as -lgdbm and such like. We assume here that -lc is present in
- # libswanted. If that fails to be true in future, then this can be
- # changed to add pthread to the very end of libswanted.
- set `echo X "$libswanted "| sed -e 's/ c / pthread /'`
- ld="cc"
- shift
- libswanted="$*"
- usemymalloc='n'
-fi
+;;
+*) # Can't tell!
+ ccflags="$ccflags -DHAS_LDBL_SPRINTF_BUG"
+ cppflags="$cppflags -DHAS_LDBL_SPRINTF_BUG"
+ ;;
+esac
+
+# end of case statement for how to print ldbl with 'f'
+;;
+*) ;;
+esac
+
+# end of case statement for whether to do long doubles
+
+EOCBU
+
+# Helmut Jarausch reports that Perl's malloc is rather unusable
+# with IRIX, and SGI confirms the problem.
+usemymalloc=${usemymalloc:-false}
https://perl5.git.perl.org / perl5.git / blobdiff